ANT ADU4517R2 1607 Datasheet
ANT ADU4517R2 1607 Datasheet
ANT ADU4517R2 1607 Datasheet
DXX-690-960/690-960-65/65-17.5i/17.5i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.6m
Antenna Specifications
Electrical Properties
2 x (690 - 960)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable , each band separately
0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10°
Gain (dBi)
16.4 16.5 16.3 16.4 16.7 16.6 16.5 17.0 16.6 17.0 17.2 16.6
Side lobe suppression for first side 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10°
lobe above main beam(Typ.) (dB) 18 17 17 18 18 18 18 18 17 18 17 17
Horizontal 3dB beam width (°) 69 68 67 65
Vertical 3dB beam width (°) 8.7 8.0 7.7 7.2
VSWR < 1.5
Isolation between ports (dB) ≥ 30
Front to back ratio, copolar (dB) Typ. 28
0° Typ. 18
Cross polar ratio (dB)
±60° Typ. 10
Max. power per input (W) 500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2535 x 608 x 150
Packing dimensions (H x W x D) (mm) 2855 x 770 x 300
Antenna weight (kg) 48.4
Clamps weight (kg) 10.8 (2 units)
Antenna packing weight (kg) 73.7 (Included clamps)
Mast diameter supported (mm) 75 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -40 .. +65
Frontal: 2095 (at 150 km/h)
Wind load (N) Lateral: 315 (at 150 km/h)
Rear side: 2275 (at 150 km/h)
Max. operational wind speed (km/h) 150
Survival wind speed (km/h) 200
Connector 4 x 7/16 DIN Female
Connector position Bottom
* Check mast diameter meets installation requirements, mast diameter must between 75 mm and 115 mm.
Accessories
Item Model Description Weight Units per antenna
1
ADU4517R2
DXX-690-960/690-960-65/65-17.5i/17.5i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.6m
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function,
contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
106
L R
1874
2535
Integrated RET S/N: HWMxxx…L….r
HWMxxx…R….r
r - Red
L - Left antenna or Left array R - Right antenna or Right array
2
ADU4517R2
DXX-690-960/690-960-65/65-17.5i/17.5i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.6m
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
requirements described in the antenna installation guide.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 3 Issue: 2015-03-05