Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 49 views

    Perform Test Data After Midlife Log EDG NCP2 NPU - 21 Feb 20

    Uploaded by

    MR BEA
    The generator performed tests at 0%, 50%, 80%, and 90% load, maintaining voltages between 401-405 volts and frequencies of 50.09-50.10 Hz. Readings were within normal ranges for oil pressure, water and oil temperatures, and fuel rail pressure. Electrical controls and meters were in good condition. Routine maintenance was recommended, with notes to retest performance after scheduled maintenance. Inspections were signed off by mechanics and an electrician.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Perform Test Data After Midlife Log EDG NCP2 NPU - 21 Feb 20

    Uploaded by

    MR BEA
    49 views1 page
    The generator performed tests at 0%, 50%, 80%, and 90% load, maintaining voltages between 401-405 volts and frequencies of 50.09-50.10 Hz. Readings were within normal ranges for oil pressure, water and oil temperatures, and fuel rail pressure. Electrical controls and meters were in good condition. Routine maintenance was recommended, with notes to retest performance after scheduled maintenance. Inspections were signed off by mechanics and an electrician.

    Original Description:

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The generator performed tests at 0%, 50%, 80%, and 90% load, maintaining voltages between 401-405 volts and frequencies of 50.09-50.10 Hz. Readings were within normal ranges for oil pressure, water and oil temperatures, and fuel rail pressure. Electrical controls and meters were in good condition. Routine maintenance was recommended, with notes to retest performance after scheduled maintenance. Inspections were signed off by mechanics and an electrician.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    49 views1 page

    Perform Test Data After Midlife Log EDG NCP2 NPU - 21 Feb 20

    Uploaded by

    MR BEA
    The generator performed tests at 0%, 50%, 80%, and 90% load, maintaining voltages between 401-405 volts and frequencies of 50.09-50.10 Hz. Readings were within normal ranges for oil pressure, water and oil temperatures, and fuel rail pressure. Electrical controls and meters were in good condition. Routine maintenance was recommended, with notes to retest performance after scheduled maintenance. Inspections were signed off by mechanics and an electrician.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    GENSET PERFORMANCE DATA

    Customer Name : PERTAMINA HULU MAHAKAN - NPU SITE Generator Model : C840D5
    Engine Model : QSK23 - G3 Generator S / N : J08S800410
    Engine S / N : 00317397 SMR :
    Test Date : 21 Feb 2020 Capacity : KVA : 630 , Volt : 400 , Amp : 909 , KW : 504 , PF : 0.8

    Room Temp. : 32
    Deg. C
    Deg. C

    A. Genset Operating Data Test


    Time Voltage Ampere Freq Oil Press W/Temp O/Temp Boost Press Rail Fuel
    % Load KW PF RPM
    (minutes) R-S S-T T-R R S T HZ (Bar) (°C) (°C) (in.Hg) Press (PSI)

    0 5 402 403 403 0 0 0 0 1 50.09 4.6 44.9 49.8 n/a 230 1500

    50 10 401 402 402 297 311 303 190.1 0.95 50.09 4.3 73.3 70.5 n/a 230 1500

    80 30 402 403 402 559 591 566 382.3 0.99 50.10 4.1 75.3 93.1 n/a 230 1500

    90 30 404 405 405 662 681 655 461.4 0.99 49.92 4.0 76.1 92.4 n/a 230 1500

    B. Max. Load Condition C. Electrical Control Panel (Switchboard) D. Maintenance Evaluation E. Engine Safety Device (Shutdown)
    CONDITION
    INSPECTION ITEM INSPECTION ITEM CONDITION INSPECTION ITEM CONDITION Inspection Item Test Condition
    at 80% at 100%

    Fuel Rail Pressure 230 230 PSI Voltage Meter Good Engine Oil Reuse Low Oil Pressure - PSI

    Turbo Boost Pressure - - in.Hg Ampere Meter Good Engine Oil Filter Reuse High Water Temp - °C
    Engine Blow by - - in.Hg Frequency Meter Good Fuel Filter New Over Speed - RPM
    Exhaust Gas Temp. 450 480 °C KW Meter Good Air Cleaner Reuse Over Crank - Sec

    Exhaust Smoke DCA Consitration Good

    F. Suggestion / Recommendation
    Note :
    1. Test Performance After Midlife
    2.
    3.
    4.

    Inspected by : Acknowledge by :

    Tomy W. Budi Susanto Mochtar Riyadi


    Mechanic Mechanic Electrician

    You might also like