Material Safety Data Sheets: (MSDS)
Material Safety Data Sheets: (MSDS)
Material Safety Data Sheets: (MSDS)
: CSW-0358
Material Safety Data Sheets Rev. date : 2018.06.18
(MSDS) Rev. No. : 3
2. HAZARD DATA
The ingredients are components of this product and hardly harmful to users because of the processed a series
of progresses.
This section covers the materials and the hazard .
○ A signal : warning
○ Health hazard statements
- H317 May cause an allergic skin reaction.
- H351 Suspected of causing cancer.
- H373 May cause damage to organs through prolonged or repeated exposure.
○ Prevention precautionary statements
- P201 Obtain special instructions before use.
- P202 Do not handle until all safety precautions have been read and understood.
- P260 Do not breathe dust/fume/gas/mist/vapours/spray.
- P272 Contaminated work clothing should not be allowed out of the workplace.
- P281 Use personal protective equipment as required.
○ Response precautionary statements
- P302+P352 IF ON SKIN: Wash with plenty of soap and water.
- P308+P313 IF exposed or concerned: Get medical advice/attention.
- P314 Get medical advice/attention if you feel unwell.
- P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
- P363 Wash contaminated clothing before reuse.
○ Storage precautionary statements
- P405 Store locked up.
○ Disposal precautionary statements
- P501 Dispose of contents and container in accordance with local and national regulations.
2-3. Other hazards : No data available
Document No.: CSW-0358
Material Safety Data Sheets Rev. date : 2018.06.18
(MSDS) Rev. No. : 3
3. COMPOSITION/INFORMATION OF INGREDIENTS
Followed terms are related to components which constituted this product.
Various materials( fumes and gases) which are occurred by welding refer to 10.safety and reaction
5. FIREFIGHTING MEASURES
5-1. Danger or fire and explosion : Product have no ignition and inflammability ,but arc , spatter, heating in
welding cause a fire and a explosion.
5-2. Fire extinguishing : In case that extinguish a fire without danger, isolate a product from fire position
and behave with one’s back to the wind
5-3. Injurious smoke : May generate injurious smoke.
5-4. Count measure : Before welding remove dangerous materials and ventilate a place of work.
Proper equipment(a fire extinguisher ) is prepared for a fire.
16. REFERENCES
16-1. This MSDS is made by CHOSUN WELDING CO., LTD and refer to the MSDS of each materials and
data of welding fume & gas from the Korea Occupational Safety & Health Agency.
16-2. Read and understand the manufacturer’s instruction and the precautionary label on the product, and
follow the laws.
16-3. Reference data : FUMES and GASES in the welding Environment(AWS)
Welding : FUME And GASES (Australian Government Publishing Service Canberra)
MSDS(KISCO-NET) of each materials
Data cooperation : Korea institute of industrial technology