Aqua Tech Parts Catalog
Aqua Tech Parts Catalog
Aqua Tech Parts Catalog
This manual was compiled for the convenience of our dealers and customers. Please supply
the model number and unit identification (serial) number when placing your parts order. The
appearance and specifications of the part may change without notice.
End users should place parts orders through the local authorized Aquatech© dealer. To find the
dealer in your area visit http://www.aquatechinc.com and then click on “Dealer Locator” in the
upper right of the screen.
Table of Contents
Hydraulics 14 Nozzles 41
Powerdeck 20 Hoses 55
r Toggle Switch
r Momentary Push Button Switch A120180
r Emergency Stop Switch A120610 2 scew terminals with blade adapters,
A380131 Reel articulation switch on rear control 25A@12VDC, PTO enable switch on
panel B-Series
r Toggle Switch
Toggle Switch r Lighted Toggle Switch
r
A120859-1
A120180-1 A120866 SPST, Off - Mom. On. 2 screw
SPST, Off - On. Plasticized 2 wires, SPST, Off - On, 4 screw terminals. terminals, 25A@12VDC, Boom
25A@12VDC. Typically used for Glows red when switched on, Flapper Switch
25A@12VDC, unit power switch on
floodlight application
B-Series
r Toggle Switch
A120861-2 r Toggle Switch
SPDT, Mom. On – Off – Mom. On. A120861-3
r Lighted Toggle Switch
3 screw terminals. 25A@12VDC. SPDT, On – On. 3 screw
A120867 Side Panel, Boom Controls,
5 screw terminals. up (on) - glows terminals. 25A@12VDC. For
Throttle Control (units with ICM Rear Panel Blower & Water
red, middle (off) - no light, down control)
(on) - glows white 25A@12VDC. Pump
Side Panel, Rear Door (tailgate),
Winter/ Summer Switch Side Panel, Rear Door Locks.
electrical
r Toggle Switch Guard
r Toggle Switch Weather Boot
A120145
A121735 Toggle Switch Guard for rear
r Toggle Switch Compatible with all previously
A120861 listed toggle switches. control panel.
SPDT, On – On. 3 blade terminals,
25A@12VDC. Cab Blower, PTO and
Water Pump switch.
Back Up Alarm
v
r Float Switch
A120854 r Pneumatic Pressure Switch
Side Mounted 1/2”NPT for load A381600
level limit. N/O or N/C. Switch Operates at
6psi. Road mode feedback for IHC
multiplex system.
miscellaneous electrical
r Pneumatically Operated
Microswitch r Boom Control Joystick
A110335-2 A110452-KIT
B-Series Foot Pedal Control Box Includes wiring harness to rear control
Load Limit Door Lock. panel for B-Series Jet-Vacs.
Questions?
Call a Parts expert at
1-800-752-2400 or
740-374-2306
for help with any parts or
r Replacement Microswitches accessories related questions.
for Boom Control Joystick
A110452-3
electrical
U4106-0053 (Incandescent) A381143 (Incandescent)
A249803 (LED) A381157 (LED)
A380871 (Grommet Only) A381144 (Grommet)
A380693 (Pigail)
r Sealed Oval Stop Tail & Turn Lamp Kit r 2” Round Marker Lamp
12V Lamp: 6.5”L X 2.25”H Rear Marker Lights
Kit includes Grommet and Pigtail
r 3-Lamp Incandescent
r Red Rectangular Reflector r Amber Rectangular Reflector
Clearance Light Bar
A120365 A120366
A120454 Compatible with B-Series Tank Frame. Compatible with B-Series Tank Frame.
12V, 14.5” Aluminum Bar. Rear
Marker Light on some units.
rotating beacons
pendant controls
electrical
pendant controls
electrical
vPendant Quick Controls (Pin not included)
A152164-2
A1522176-5: Pin for A152164-2 (requires special crimp tool)
For use with all Pendants with Quick Disconnect
work lights
r HID Worklight
rPanel Work Light Kit
A304127
A120101
150W 12V . 12250 Lumens.
A120020 (Lamp Only)
A240061 (Bracket Only)
A120180-1 (Toggle Switch Only)
A121735 (Switch Boot Only)
electrical
Strobe lights
r Very High Profile, High Intensity r High Profile, High Intensity r Low Profile, High Intensity
Amber Strobe Amber Strobe Amber Strobe
A121050 A380028 A338716
12-24V, 65/80 FPM. 6.5” Dia. Base X 8”H. 12-48V, 80 FPM. Dual Flash. 6.5” OD X 12-24V, 72 Quad FPM.
Automatically adjusts for day or night 6”H. Advanced Lens Optics. Compatible 6.375” Dia. Base X 5”H
operation. Field Selectable: Dual or quad with all models. Compatible with all models.
flash. Compatible with all models.
r Linear Strobe
r Amber Mini Strobe
A380668
r Amber Super Strobe A122085 12V Halogen strobe for use with
A122083 12-24V, 80 FPM.
B-Series Rear Bumper/Splash Guard
12-24V, 80 FPM. 7.5” OD X 7”H. 5” Dia. Base X 3.75”H
Strobe.
Aluminum Base. Compatible with all Polycarbonate Base. Compatible with
models. B-Series Dual Mounted Boom Strobes.
arrow boards
gauges
gauges
r Vacuum/ Pressure Gauge
r Vacuum/ Pressure Gauge r Water Pressure Gauge
A131790
A131765 - 100 hg. In. to 100 psi. Pedestal A131786
-30 hg. In. to 30 psi. Flange Mount. Mount. 1/4”MNPT. Compatible 0 to 5000 psi. Flange Mount. 1/4”MNPT.
1/4”MNPT. Compatible with B-Series. with JV1000 & JVLT. Compatible with most models.
hydraulic filters
v Spin On Hydraulic Filter
Assembly for B-Series
A110515 (Filter Assembly)
A110516 (Element Only)
hydraulics
v Boom Hydraulic
v High Pressure Hydraulic Filter Control Valve Filter
A383754 (Filter Assembly) A383767
Compatible with B-Series
A383754-E (Element Only)
Compatible with current B & SJ Series.
hydraulic valves
r Boom Hydraulic Directional Control Valve r Boom Hydraulic Directional Control Valve
Assembly for Late Model B-Series Assembly (3 Spool) for Older B-Series
A246521 (12 Volt) A110496 (12 Volt)
A246521-24 (24 Volt) A110501 (24 Volt)
NOTE: See parts bulletin AQPB-111 for components. NOTE: See parts bulletin AQPB-128 for components.
hydraulic valves
hydraulics
r Adjustable Flow Control Valve
A110275 r Priority Flow Control Valve r Velocity Check Valve
1/4” NPT. Used for Boom Lift Cylinder.
for B-Series A110304
A110292 For use with B-Series Tank
Tipping Cylinder.
hydraulic cylinders
hydraulic cylinders
hydraulics pneumatics
A110108 (109.25” Stroke) For use with the r Door Lock Cylinder Including Wedge
B-5, B-10 & B-52 A246523-P
A110107 (120” Stroke) For use with the B-15 For use with the B-Series
hydraulic reservoir
v Hydraulic Reservoir for Late Model
B-Series
A110000
NOTE: See parts bulletin AQPB-147 for components
pneumatic valves
r Pressure Protection Valve r Manual Air Control Valve r Air Actuator Valve
A111235 A111215 A111217
Compatible with all models with Compatible with older B-Series models Compatible with older B-Series models
pneumatics with pneumatically controlled throttle with pneumatically controlled throttle
miscellaneous pneumatic
v Separator
A383736 (Oil Separator)
3/8”NPT Ports
A383737 (Water Separator)
3/8”NPT Ports
r Pneumatic Cylinder Compatible with current models
A249777 with pneumatic controls
For use with B-Series Boom Flapper
pneumatics
plastic tubing
pneumatics
r Universal Joint Kit
A161592 r U-Joint Strap Kit
Compatible with jack shafts 12” C.L. to E, A161634
jack shafts 13” C.L. to E, jack shafts 14” C.L. For use with the A161592 U-Joint
to E, jack shafts 15” C.L. to E, jack shafts 16”
C.L. to E, jack shafts 17” C.L. to E, jack shafts
20” C.L. to E
powerdeck
32 A163004 Taper Lock 2517 Various Power Decks
33 A163000 Taper Lock 2517 Various Power Decks
34 A163005 Taper Lock 2517 Various Power Decks
36 A163006 Taper Lock 3020 Myers BOM
38 A163069 Taper Lock 3020 Earlier pulleys used 2517 series bushing
40 A165025 Taper Lock 3020 Various Power Decks
43 A163123 QD-E Old Roots 624 BOM
45 A163023 Taper Lock 3020 Various Power Decks
45 A163077 QD-E Old B10 BOM
48 A163114 Taper Lock 3525 Earlier pulleys used 2517 series bushing
48 A165018 QD-E Old B10 BOM
50 A249160 Taper Lock 3525 Various Power Decks
56 A163121 Taper Lock 3525 Earlier pulleys used 2517 series bushing
63 A163051-1 Taper Lock 3525 Various Power Decks
71 A163021 Taper Lock 3525 Earlier pulleys used 3020 series bushing
71 A163076 QD-J Myers BOM
powerdeck
PART NO. MAKE/MODEL CFM* SHAFT ROT. TYPICAL INPUT
APPLICATION FLANGE
GASKET
A000020 Roots 412 1166 LH CCW JV1000, JV1000HPD 18-0143
A340350 Roots 412 1166 BH CCW B-3 18-0143
A382001 Hibon VTB820 1400 BH CCW B6-EW A382044
A381052 Sutorbilt 6MP 1500 LH CCW JVLT 5’NPT
A340400 Roots RAM624 3173 BH Bi-Dir B-Series early 90s to present A242808
A340421 Roots RAM624 3173 RH CW B6-2E, B10-2E A242808
A381565 Hibon TS56MV18 3650 BH CW B-Series U3803-0019
A381598 Hibon TS56MV18 3650 TH CCW B12/2000 U3803-0019
A381622 Hibon SIAV 840 3800 BH CCW B-Series U3803-0031
A381920 Hibon SIAV 840 3800 BH CW X-10, X-15 U3803-0031
A340421 Roots RCS824 4208 BH CW B-Series U3803-0019
A340407 Roots RCS827 4822 BH CW B-Series A242799
A381429 Hibon SIAV8702 5250 TH CW B-15 U3803-0032
A381621 Hibon SIAV8702 5250 BH CCW CB-15 U3803-0032
* Free air displacement at maximum speed
8” Closure Seal
r
A191286
A381225 (Clamp for 8” Closure Seal)
For use with the B-Series & JV Series
powerdeck
r Vacuum Relief
16-0267
15”hg vacuum relief valve, 3”NPT, for use with the B-Series
16-0006
18”hg vacuum relief valve, 3”NPT, for use with the B-Series
with Hibon T56MV18 Blower
v Rubber Sleeve, Silencer
to Blower Inlet Flange
A176380
Compatible with the B-Series
powerdeck
pressure relief valves
gate valves
ball valves
NPT PART NO. BODY PORT MAX PSI COMMENT TYPICAL APPLICATION
SIZE
¼” A130885 Brass Full 400 Various air & water
A130890 Steel Reduced 2000 Various
½” A130891 SS Reduced 2000 Various
A130893 Steel Reduced 3000 w/ Padlock Wash Down Gun
Loops, Yellow
Handle
¾” A130906 SS Full 2000 Yellow Handle Various
A130901 Steel Reduced 2000 Blue Handle Cold Water Recirculation
1” A130903 Steel Reduced 3000 Orange Handle Various
1¼” A100188 Steel Full 3000 Various
A130909 Brass Full 600 Hydraulic Reservoir
1¼” A130910 Steel Full 3000 Yelllow Handle Various
2” U4631-0012 Brass Std. 600 Various
2½” A140062 Brass Full 600 Various
3” A140079 Brass Full 600 Suction Lines
A382094 Brass Full 450 Various
4” A382599 Brass Full 450 Various
watersystem
v Cast Iron Hose Reel Swivel
A130729 (3/4” Reel Swivel) v 1/2”NPT Hose Reel Swivel
Compatible with some B-5 units
30018-SWIVEL
J-2405-2 (1”NPT Reel Swivel) Compatible with most Reelcraft Auxilliary
Optional retrofit for SJ trailer units
Hose Reels
A130727-1 (1-1/4”NPT Reel Swivel)
Compatible with B-Series
r Bleeder Valve
r Bleeder Valve
r Globe Needle Valve A221440
A110351
A130904 For purging air out of water
For blowing out water in water
For use with B-Series Manifold pumps for winterization.
pump manifolds.
spray guns
v Spray Gun
A131632
Quick Adjusting Wash Down Gun, 25gpm @ v High Pressure Spray Gun
850psi rating A383407
A381492 21gpm@7250psi rated
A131632 Hand Gun with A130810 female For use with the B-Series with
Hydro-Excavation Pakage
quick coupler
A131625
A131632 Hand Gun with A175065 25’ hose
watersystem
unloader valves
v MSUV29/300 Uraca
A380279
4350 Max psi, 170 Max gpm,
Includes 1”MJIC Fittings
A380279-2
r General Pump 4350 Max psi, 170 Max gpm, r MSSV24/250
A215555 Includes 1”FNPT Fittings
PN3/160 General pump, A380279-1
2350 Max psi, 120 Max gpm, 3625 Max psi, 92 Max gpm,
1-1/2”MSP-F ports Includes 1”MJIC Fittings
A381507
PN3/240 General pump,
3500 Max psi, 80 Max gpm,
1-1/2”MSP-F ports
watersystem
r Poly Tank Vented Lid r Poly Tank Filler Lid
A384670 A384671
For use with B-Series Saddle Tanks Compatible with B-Series PH
Front Saddle Tank
r Uniseal
A176790
For use with 1” Pipe. Compatible
with Poly Tank 1” Return Port
r 6” PCV Water Tank A176793
For use with 2” Pipe. Compatible
Transfer Tube with Poly Tank 2” Return Port
A246448 A176794
Compatible with B-Series
For use with 6” Pipe. Compatible
with Poly Tank Transfer Tube
v 2” Y-Strainer
A240029
Parts: A240029-2 (Gasket)
A240029-1 (Screen)
Compatible with SJ-300P, SJ-600P or B-Series
Filler Pipe
r 1-1/2” T-Strainer
A131098
Parts: A131089 (Gasket)
A131096 (Screen)
Compatible with SJ-300E or SJ-600E
v3” Y-Strainer
A380820
v 3” Y-Strainer Parts: A240034 (Lid Gasket)
A380819 A380820-7 (Outer Cap Gasket)
Parts: A240034 (Gasket) A380820-1 (Screen)
A240028 (Screen) Compatible with current B-Series
Compatible with older B-Series
t-bolt clamps
PHOTO PART NO. CLAMP RANGE TYPICAL APPLICATION
05-0506 1.78” - 2.09” ID
08-0401 2.28” - 2.59” ID
A382126 2.78” - 3.09” ID
U4607-0311 3.39” - 3.68” ID A176470 3”ID Hose
05-0246-09 3.31” - 3.59” ID
08-0510 4.00” - 4.31” ID
watersystem
U4601-0216 4.24” - 4.56” ID
05-0246-10 4.31 - 4.59” ID
U4607-0235 4.50” - 4.81” ID A176480 4”ID Hose
U4607-0238 4.75” - 5.06” ID
08-0493 5.25” - 5.56” ID
08-0492 5.50” - 5.81” ID
08-0519 6.00” - 6.31” ID
10-0575 6.25” - 6.56” ID
10-0703 7.25” - 7.56” ID
A381225 8.66” - 8.94” ID 8” Boom Hose & Closure Seal
r Roll Pin
A107409
3/8” X 3” Roll Pin, (3 used)
Rubber Bumper Lock Clamp
r
r
A220686 (Lock Clamp) A107410
A246185 7/32” X 1-1/2” Roll Pin, (6 used)
Compatible with B-Series Rear A246185-1 (Rubber Clamp Pad) For use with B-Series Swing Arm
reel parts
debris tank
debris tank components
lay-flat hose
boom parts
boom parts
boom parts
boom parts
r Boom Flapper Valve Seal
r Turret Flange Gasket r Boom Hose Ringlock Adapter
A192011
Compatible with 8” Booms
A192010 A245581
Compatible with 8” Booms Compatible with 8” Booms
r Lip Seal for Boom Hose Adapter r Male Ringlock Boom Hose
A191804 r Ringlock Clamp
Coupler
Compatible with 8” Booms A220425
Compatible with 8” Booms A380355
Compatible with 8” Booms
Questions?
Call a Parts expert at
1-800-752-2400 or
r Boom Rest 740-374-2306
(2 used) for help with any parts or
r Boom Hose Roller A249376 accessories related questions.
A238409 Parts Include:
Compatible with 8” Booms A249371-4 Horizonal Pad
A249371-5 Upright Pad
A249372 Anchor Smack
Compatible with 8” Booms
boom parts
* O-Ring Not Included
vacuum tubes
aquatech style
boom parts
ringlock style
nozzles
nozzles
standard thrust nozzles
Designed to create fast acceleration and long runs in small and medium sized pipes.
Part No. Prop. Angle Rear Jets Fwd. Jets GPM PSI NPT Size
A130050 15° 6 0 35 1850 3/4"
J-1019 15° 6 1 65 2000 1"
nozzles
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
nozzles
nozzles
radial degreaser/deicer nozzle
Part No. Prop. Angle Rear Jets Fwd. Jets GPM PSI NPT Size
344020DE 35° 6 3 @ 10° 40 2000 3/4"
Custom drilled Radial Nose (RN) nozzles are available to meet your
specifications. They are designed to accommodate a range of spray
angles from 18° for high trusting power up 65° for flushing action.
Side wall jets of 90° are possible, as well as forward jets from 0° to
45°. 6 to 12 rear jets, 0 to 3 forward. Made of heat treated 416
Stainless Steel. Note: Custom drilled nozzles are not returnable.
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
nozzles
impactor nozzles
Designed for completely blocked or heavily fouled pipes.
Part No. Prop. Angle Rear Jets Fwd. Jets GPM PSI NPT Size
nozzles
penetrator nozzles
Part No. Prop. Angle Rear Jets Fwd. Jets GPM PSI NPT Size
J-1102 30° 5 0 35 2000 3/4"
J-1104 30° 5 0 65 2000 1"
J-1103 30° 5 1 65 2000 1"
J-1104-80 30° 5 0 80 2000 1"
J-1103-80 30° 5 1 80 2000 1"
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
nozzles
nozzles
radial with lance tip nozzles
These nozzles feature rear jet angles for extremely quick acceleration up to the line.
Part No. Prop. Angle Rear Jets Fwd. Jets GPM PSI NPT Size
A136120 15° 6 6 35 2000 3/4"
A136018 15° 6 6 65 2000 1"
A136019 35° 6 6 65 2000 1"
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
nozzles
Ellipse Nozzles
This is the best long lasting nozzle made. Wear- Resistant high carbon steel construction. This
smooth service nozzle will penetrate through blockages and is capable of being retrieved without
binding on offset joints, broken pipes or tight bends. Orifices are replaceable.
Part No. Prop. Angle Rear Jets Fwd. Jets GPM PSI NPT Size
A136155 15° 6 1 35 2000 3/4"
A136150 15° 6 1 65 2000 1"
A136165 15° 6 1 65 2500 1"
A136151 15° 6 1 80 2000 1"
Missile Nozzles
Two banks of rear propulsion orifices for increased thrust. Like having two high thrust radial nozzles
with a skid built in between. Made of wear resistant high carbon steel.
Part No. Prop. Angle Rear Jets Fwd. Jets GPM PSI NPT Size
A130433 15° 12 0 65 2000 1"
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
nozzles
Custom drilled Rotor-Jet nozzles are available to meet your specifications. All
Rotor-Jet can accommodate spray angles between 45° to 90°. NOTE: 1/2"NPT
Rotor-Jets can accommodate a higher thrusting angle of 30°.
Pattern: 2 jets (one angle) or 4 jets (two angles) within available range.
nozzles
Made of Heat Treated 416 Stainless Steel. Note: Custom drilled nozzels are not
returnable.
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
nozzles
carbide cutter nozzles
Tungsten steel cutter blades set at 120° angle for drilling cement, calcium and other hard deposits.
Centering skids are recommended.
Part No. Prop. Angle Rear Jets Fwd. Jets GPM PSI NPT Size
A136320 25° 6 5 35 2000 3/4"
A136130 25° 6 7 65 2000 1"
propeller nozzles
Designed to cut through solid blockages and roots. Centering skids are recommended.
Part No. Prop. Angle Rear Jets Fwd. Jets GPM PSI NPT Size
A136105 25° 6* 5 35 2000 3/4"
A136100 25° 6* 5 60 2000 1"
A136102 25° 6* 5 80 2000 1"
* Replaceable
nozzles
aquatech storm nozzles
TM
25% more cleaning surface. Large diameter places water closer to the pipe wall. Most efficient for
grease, detergent, and removal of large volumes of sand in sanitary sewers and drains. For pipes 8”
to 36” in diameter. Orifices are replaceable.
Part No. Prop. Angle Rear Jets Fwd. Jets GPM PSI NPT Size
A130150 35° 8 A131543 35 2000 3/4"
A130380 35° 8 A131543 65 2000 1"
A130382 35° 8 A131543 80 2000 1"
A130386 35° 8 A131543 80 2000 1-1/4"
A130383 35° 8 A131543 100 2000 1-1/4"
nozzles
storm vortex nozzles
Combines good forward propulsion while affording wide angle cleaning.
Part No. Prop. Angle Rear Jets Fwd. Jets GPM PSI NPT Size
A130150 35° 8 A131543 35 2000 3/4"
A130380 35° 8 A131543 65 2000 1"
A130382 35° 8 A131543 80 2000 1"
A130386 35° 8 A131543 80 2000 1-1/4"
A130383 35° 8 A131543 100 2000 1-1/4"
* Replaceable
For general cleaning in larger pipes. Aluminum body with replaceable orifices.
Part No. Prop. Angle Rear Jets Fwd. Jets GPM PSI NPT Size
J-1201 30° 5 0 35 2000 3/4"
J-1211 30° 8 0 65 2000 1"
a note about all of our rotating nozzles: In order to exend the life of these nozzles, we recommend
submerging them in lubricating oil after each use.
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
nozzles
These O’Brien tandem nozzles work on the same principle as the Aquatech Double
Storm nozzles. Orifices are replaceable.
Part No. Prop. Angle Rear Jets Fwd. Jets GPM PSI NPT Size
J-1205 30° 16 0 35 2000 3/4"
J-1213 30° 16 0 65 2000 1"
tadpole nozzles
Our best all around cleaning nozzle for 8” and larger pipes. Highly effective for removing grease from the pipe wall.
Removes standing water. Carbide orifices are replaceable. Steel construction with spring steel skid wires.
Part No. Prop. Angle Rear Jets Fwd. Jets GPM PSI NPT Size
A136105 25° 6* 5 35 2000 3/4"
A136100 25° 6* 5 60 2000 1"
A136102 25° 6* 5 80 2000 1"
a note about all of our rotating nozzles: In order to exend the life of these nozzles, we recommend
submerging them in lubricating oil after each use.
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
nozzles
o’brien TM
torpedo nozzles
The O’Brien torpedo’s heavy weight (55 lbs.) keeps it along the base of the line. This, combined with its large diameter
(5 1/2”) makes it ideal for flushing sand and debris in large culverts. Orifices are replaceable.
Part No. Prop. Angle Rear Jets Fwd. Jets GPM PSI NPT Size
J-1450-A 30° 8 0 35 2000 3/4"
J-1450 30° 8 0 65 2000 1"
This bottom cleaning nozzle features, a towing eye, replaceable orifices, 360° rotating swivel to prevent hose from
nozzles
turning the nozzle, and a smooth hardened surface to allow the nozzle to glide over sand and debris. 4” diameter, 24
lbs. approx.
Part No. Prop. Angle Rear Jets Fwd. Jets GPM PSI NPT Size
A136185 35° 4 0 35 2000 3/4"
A136180 35° 4 0 65 2000 1"
A136187 35° 4 0 80 2000 1"
A136195 35° 4 0 100 2000 1-1/4"
stingray nozzles
Simply the best. The most efficient nozzle ever developed for cleaning 18” and larger diameter
pipe. Weighted and balanced to ride evenly in the bottom of the pipe. Hose swivel and rollover
bar virtually eliminate flip over. Orifices are replaceable.
Part No. Prop. Angle Rear Jets Fwd. Jets GPM PSI NPT Size
A136215 11°/18°/45° 6 0 35 2000 3/4"
A136210 11°/18°/45° 6 0 65 2000 1"
A136230 11°/18°/45° 6 0 70 2900 1"
A136220 11°/18°/45° 6 0 80 2000 1"
A136225 11°/18°/45° 6 0 80 2500 1"
culvert nozzles
Made of rugged heat-treated aluminum alloy. The weight can be adjusted by adding sand or
lead shot into a hollow cavity at the bottom of the nozzle. A tow eye is cast into the front and
a hose swivel is included. Orifices are replaceable.
Part No. Prop. Angle Rear Jets Fwd. Jets GPM PSI NPT Size
A130426 11°/18°/35° 6 0 35 2000 3/4"
A130425 11°/18°/35° 6 0 65 2000 1"
A130428 11°/18°/35° 6 0 80 2000 1"
A130427 11°/18°/35° 6 0 80 2500 1"
A130429 11°/18°/35° 6 0 100 2000 1-1/4"
a note about all of our rotating nozzles: In order to exend the life of these nozzles, we recommend
submerging them in lubricating oil after each use.
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
nozzles accessories
r Nozzle Extensions
r Nozzle Orifice Cleaning Kit Prevents the sewer hose from reversing direction in
J-1850 larger pipes. Also prevents nozzle form entering a
Cleans out nozzle orfices to maintain lateral pipe. Helps reduce wear on sewer hose.
nozzle performance and spefication. part no. Length NPT Size
A130004 12" 3/4"
A130001 12" 1"
A130002 12" 1-1/4"
nozzles
A Style
part no. for pipe sizes npt size
part no. for pipe sizes npt size A130010 6" - 8" 1"
J-40-5 J Style
5" - 7" 3/4" A130020 10" - 12" 1"
A130014 6" - 8" 3/4" A130030 15" - 21" 1"
A130024 10" - 12" 3/4" A130011 6" - 8" 1-1/4"
A130034 15" - 21" 3/4" A130021 10" - 12" 1-1/4"
J-40-6 5" - 7" 1" A130031 15" - 21" 1-1/4"
Questions?
Call a Parts expert at
1-800-752-2400 or
740-374-2306
for help with any parts or
accessories related question.
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
root cutters
root cutters
A130461 35 - 40 1800 - 2200 3/4"
A130460 55 - 65 1800 - 2200 1" Cutter Blade Chuck
(for Aquatech Root Cutter)
A130452 80 - 90 1800 - 2200 1"
replacement optional 1 2
pipe cutter blades skids saws brushes
size (3 required) (4 required)
6" A131010 A239909 A130500 A130470
8" A131020 A239922 A130510 A130471
10" A131030 A239924 A130520 A130472
12" A131040 A239926 A130530 A130473
15" A131050 ¹ A239927 * A130535 A130474
1
Not included in Root Cutter Kit 2
Attaches to A131080 or J-7000 cutter blade chuck
Optional Saws: Heavy duty, high tensile spring steel, Optional Steel Brushes: Made of dual row twisted
full circle design. Spiral saw cutters have teeth on both high density steel wire. For cleaning hair roots, grease,
sides of blade to allow cutting going in and coming back. detergent, calcium, paint and corrosion from pipe walls.
Concave shape extends tooth life. Attaches to cutter Attaches to cutter blade chuck.
blade chuck.
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
root cutters
J-3201-XB 65 2000 1" 6", 8" & 10" (expandable cutter blades)
J-3203 65 2000 1" 6", 8", 10" & 12" (concave saws)
J-3200 65 2000 1" 6", 8", 10", 12" & 15" (concave saws)
* Provides the best cutting performance between 900 and 1400 PSI (700 RPM @ 575 in. lbs. torque.)
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
hoses
leader hoses
Most of the wear on a sewer cleaning hose occurs on the first several feet working through
the sewer. By adding a leader hose one can extend the life of the main roll of hose. Female
fitting on hose end to male fitting on nozzle end.
Part No. npt size length max working cover material stocking status
J-1931 3/4" 10' 2500 psi Thermoplastic Call for Availability
A176105 3/4" 10' 3000 psi Rubber Special Order
J-1905 3/4" 20' 2500 psi Rubber Normally Stocked
A176106 3/4" 20' 3000 psi Rubber Special Order
A249253 3/4" 25' 3000 psi Rubber Special Order
J-1919 1" 3' Rubber Call for Availability
J-1923 1" 4' Rubber Special Order
J-1933 1" 10' 2500 psi Thermoplastic Call for Availability
A176100 1" 10' 2000 psi Rubber Normally Stocked
A176107 1" 15' 2000 psi Rubber Call for Availability
A176110 1" 20' 2000 psi Rubber Normally Stocked
J-1934 1" 25' 2500 psi Thermoplastic Normally Stocked
A176115 1" 25' 2000 psi Rubber Call for Availability
A176104 1" 30' 2000 psi Rubber Special Order
A176101 1-1/4" 10' 2000 psi Rubber Special Order
A176102 1-1/4" 20' 2000 psi Rubber Special Order
A176103 1-1/4" 25' 2000 psi Rubber Special Order
hoses
sewer hose swage fittings
These swage fittings are specifically designed for the sewer hose we sell. Note: Manufacturer’s swaging equipment
required to install these ends. Use of other fittings and equipment is at users own risk. Due to the higher pressures
involved with 3/8” and smaller hoses, the manufacturer does not supply replacement fittings.
3/4” 2500 PSI Hose 1” 2500 PSI Hose 1 1/4” 2500 Psi hose
Male End A170040 A170020 A381705
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
hoses
trap hoses
Designed for cleaning.
Part hose size hose npt hose hose psi
No. length ends
15031-50 1/8" 50' 1/8"M x 1/8"M 4000
15031-100 1/8" 100' 1/8"M x 1/8"M 4000
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
accessories
swivel unions
Female pipe to female pipe swivel unions for joining two sections of hoses together.
hose size 3/16” hose 1/4” hose 3/8” hose 1/2” hose 3/4” hose 1” hose
Part Number 9255X2X2 9255X4X4 9255X6X6 A381980 A338105 A130690
“live” swivels
Allows attachments to swivel freely without twisting the hose. Male pipe to female pipe swivel union.
hose size 3/4” hose 1” hose
Part Number A130848 A130849
J-2432 A249182
J-2432-2
J-2434 A249485
OBJ-1724K J-2434A
OBJ-40027A J-2434-200
OBJ-40028A J-2436
J-241230
accessories
Part No. inlet size hose size hose length max psi nozzle(s) control
OBJ-1724K 3/8"FNPTS 3/8" 150' TP 3000 (reel) none OBJ-20027B +
J-2432 * 3/8" 150' TP 3000 (reel) two 3/8" 10gpm none
J-2436 * 3/8" 150' TP 3000 (reel) two 3/8" 10gpm 3/8" Ball Valve
J-2432-2 * 3/8" 200' TP 3000 (reel) two 3/8" 10gpm 3/8" Ball Valve
OBJ-40027A 1/2"FNPTS 3/8" 150' TP 3000 (reel) two 3/8" 10gpm OBJ-20027A +
OBJ-40028A 1/2"FNPTS 3/8" 200' TP 3000 (reel) two 3/8" 5gpm OBJ-20027A +
A249485 1/2"FNPT 1/2" 150' RU 4000 (hose) 1/2" 20gpm Ellipse A249183 +
A249182 1/2"FNPT 1/2" 150' RU 3000 (reel) 1/2" 20gpm Ellipse A249183 +
A249182-200TP 1/2"FNPT 1/2" 200' TP 3000 (reel) 1/2" 20gpm Ellipse A249183 +
J-241230 * 1/2" 150' TP 3000 (reel) two 1/2" 30gpm ½" Ball Valve
J-2434 3/4"FNPT 1/2" 150' TP 3000 (reel) two 1/2" 40gpm ¾" Ball Valve
J-2434-200 3/4"FNPT 1/2" 200' TP 3000 (reel) two 1/2" 40gpm ¾" Ball Valve
J-2434A 1"FNPT 1/2" 150' TP 3000 (reel) two 1/2" 60gpm ½" Ball Valve
* 3/8” Female Hand Gun Quick Connector Outer Jacket: TP Thermoplastic RC= Rubber + Foot Control - (see next page)
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
accessories
A Style obj Style
foot controls
For auxiliary hose reels and later line kits.
part no. inlet npt outlet npt outlet hose max psi
A249183 1/2" F 1/2" F none 10000
OBJ-20027 1/4" F 1/4" F none 5000
OBJ-20027A 1/2" FS 3/8" MS * 3' 5000
OBJ-20027B 3/8" FS 3/8" MS * 3' 5000
30027-2
A130560 30027-14 OB40027A
A249184 30027A OB40028A
30027B (no hose)
Part No. hose size reel capacity spool width hose max psi
30027-14 1/4" 200' 6" 1/4" x 150' 2750 (hose)
30027A 3/8" 150' 6" 3/8" x 150' 3000 (reel)
OB40027A 3/8" 150' 6" 3/8" x 150' 3000 (reel)
30027B 3/8" 150' 6" none 3000 (reel)
30027-2 (black) 1/4" * 200'
A130560 (red) 3/8" ** 150' 6" none 3000 (reel)
1/2" 100'
accessories
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
accessories
accessories
shown for illustration purposes only.
r Manhole Hooks
r Hydrant Wrench
A221800 r Manhole Grapple Tong
29” w/Perpendicular
A220330
A238061
T-Handle 98” Overall length.
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
accessories
v Basin Scraper
A220082
Scraper with 6’ Handle. r Manhole Debris Grabber
OBJ-299
5’-15’ Telescoping.
accessories
rManhole Traps
A220010: Small (6” to 8”) Grit Catchers
r
A220020: Medium (10” to 12”) OB00016A: 6” Grit Catcher
A220010: Large (15” to 18”) OB00018A: 8” Grit Catcher r Portable Gas Powered
Inserts into downstream side of Inserts into the manhole opposite Water Pump
pipe in manholes. Prevents solids the hose entrance. Remove cobble MCPH
and debris from entering pipe and other debris before it’s carried System includes:
while allowing water to overflow further downstream. 3/4”NPT 1” Suction Hose
downstream while jetting the pipe fitting on a swivel bracket for Suction Strainer
opposite pipe. Loop provided to attaching pipe to lower grit catcher. Garden Hose Adapter
attach rope. Spark Plug Tool
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
accessories
accessories
ADAPTERS
A381677 8” Female Aquatech to 8” Flat Flange Adapter
A171313 8” Flat Aquatech to 8” Male Aquatech Adapter
A383272 8” Female Aquatech to 8” Female Ringlock Adater
A383259 8” Female Aquatech to 8” Male Righlock Adapter
r 8” Flat Flange
Hose Shank Adapter
A381677
NOTE: Designs and specifications are subject to change without notice. Pictures may not be exact.
notes
2011