Indoor Integrated Power System: TP48200B-N20B2

Indoor Integrated Power System
TP48200B-N20B2
Introduction
TP48200B-N20B2 is an AC/DC indoor integrated power system with 200A
rated output current. It can accommodate 4x1U 48V/50A high efficiency
rectifiers/solar supply units, 2~4 groups of batteries and 0~16U user space in
maximum.
Features
 Compatible with solar supply unit (SSU), making efficient use of solar
energy to save electricity consumption in maximum
 1U rectifier: high density(42.7W/inch3), high efficiency(>96%), excellent

high temperature performance(fully output below 55℃)
 Can accommodate 2~4 groups of batteries and 0~16U user space for main
equipments/48-24V secondary power, providing better use of space
 Compatible with high-temperature batteries, saving site cooling cost by

increasing cooling temperature
 Intelligent battery management functions, helping prolong battery lifespan
 Battery anti-reversed polarity function to avoid the danger caused by

reversed polarity connection TP48200B-N20B2
 Abundant I/O ports, including 5 AI, 9 DI and 8 dry contract output
 Realizing centralized and remote site monitoring by zero additional

hardware cost through in-band transmission
Application Scenarios
 Wireless access network
 Fixed access network
 Convergence network
 Enterprise communication network

Specifications
Product Type TP48200B-N20B2
Dimension 600mm(W)×600mm(D)×2000mm(H)
Weight ≤100kg (without rectifier modules or batteries)
Cooling mode Natural cooling
Installation mode Ground installation (Antistatic floor or ground installation)
System Cabling mode Top inlet and top outlet
Maintenance mode Front operation and maintenance; support installation against the wall (≥100mm)
Protection level IP20
Battery space 16U(2 groups×150Ah)
User space 16U
220/380V three-phase four-wire

Input mode
220V single-phase
AC Input voltage 85~300VAC (L-N)
Distribution Input frequency 45~66Hz, rated value: 50Hz/60Hz
Input capacity MCB: 1x63A/3P
SPD 20kA/40kA, 8/20μs
PVDU input(optional with SSU) MCB: 4×63A/1P
Output voltage -42~-58VDC, rated value: -53.5VDC
Maximum capacity 12kW(4×3000W)

DC Battery branch MCB: 2x125A/1P
Distribution
LLVD branch MCB: 2x80A/1P, 1x32A/1P, 2x20A/1P;
BLVD branch MCB: 2x32A/1P, 3x16A/1P, 1x10A/1P;
Max. output power 3000W
Max. configurable num. of SSU 2 pcs
Rectifier Power efficiency

PSU: >96%*
/ Solar Supply Unit SSU: up to 98.5%
Dimensions 105mm(W)×281mm(D)×40.8mm(H)
Weight ≤2kg
5 AI(Battery temp., ambient temp., ambient humidity, temp1, temp.2)

Signal input
9 DI(Water, smoke, gate, 6 common DI)
Alarm output 8 dry contacts

Controller
Communication port RS232, RS485, FE
Storage capacity Up to 50000 historical records and alarm
Display mode LCD
Operating temperature -10℃~+45℃(including batteries)
Storage temperature -40℃ ~+70℃

Environment
Operating humidity 5%~95%(non-condensing)
Altitude 0~4000m
* Remark: Optional rectifiers with power efficiency >92% are available for this system.
Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved. HUAWEI TECHNOLOGIES CO., LTD.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Huawei Industrial Base
General Disclaimer Bantian Longgang
The information in this document may contain predictive statements including,without limitation, statements regarding the future Shenzhen 518129, P.R. China
financial and operating results, future product portfolio, new technology, etc. There are a number of factors that could cause actual Tel: +86-755-28780808
results and developments to differ materially from those expressed or implied in the predictive statements. Therefore,
such information is provided for reference purpose only and constitutes neither an offer nor an acceptance.
www.huawei.com
Huawei may change the information at any time without notice.
Indoor Mini Power System
TP48300B-N04C2
Introduction
TP48300B-N04C2 is a type of mini -48 Vdc power systems, which can accommodate 6×1U 50A high efficiency rectifier
modules, the maximum output current is 300A. With advantage of features like compact size, easy to install, compatible with
battery rack stacking and standard open rack, excellent function of BMS, intelligence dormancy and remote management, etc.
Features
Features
 Flexible installation: battery rack stacking, 19/21/23 inches open
rack, ground, DFMU cabinet or wall-mounted optional
 System complies with CE standard: rectifier complies with UL, CE,
TUV standards Scenarios
 1U high efficiency rectifier(>96%): fully output below 55℃
 Provides comprehensive battery management
 System efficiency promotion: support intelligent dormancy
technology
 Easy installation: hot-swappable system modules
TP48300B-N04C2
 Supports NetEco network management system and in-band/
out-band networking: reduces operation expenditure
Scenarios
Specifications
Product Type TP48300B-N04C2

Dimensions 442mm (W) × 360mm (D) ×546mm (H)
Weight ≤30 kg (Without rectifier modules)
System Installation mode On the battery rack, 19/21/23 inches open rack, ground, DFMU cabinet, wall-mounted
Cabling mode Top inlet and top outlet
Maintenance mode Front and top operation and maintenance

Noise level ≤55 dB (At ambient temperature 25℃)
220/380 Vac three-phase four-wire;
Input mode
220 V single-phase
Input voltage 85 Vac～300 Vac
AC
Input frequency 45~66 Hz, rated 50 Hz/60 Hz
Distribution
Input distribution 1×63 A/3P (MCB)
SPD 20 kA/40 kA, 8/20 μs
Output voltage -42~-58 Vdc, rated -53.5 Vdc
Maximum capacity 18 kW (6×3000 W)
DC Battery branch(fuse) 2x160 A (fuse)
Distribution LLVD branch(MCB) 1×100 A/1P, 2×80 A/1P
BLVD branch(MCB) 1×63 A/1P, 1×32 A/1P, 2×16 A/1P
SPD 10 kA/20 kA, 8/20 μs
Rated power 3000 W(176 Vac ～ 290 Vac)
Power efficiency >96%
Working temperature -40℃ ~ +75℃
Rectifier Dimensions 105mm (W) ×281mm (D) × 40.8mm (H)
Weight <2 kg
Power factor ≥0.99
THD ≤5%
3 AI (Battery temp., ambient temp., ambient humidity)

Signal input
9 DI (Water, smoke, gate, 6 common DI)

Controller Communication port RS232, RS485, FE
Storage capacity Up to 2000 historical records
Display mode LCD
Operating temperature -10℃ ~ +50℃
Storage temperature -40℃ ~ +70℃

Environment
Operating humidity 5% ~ 95%(Non-condensing)
Altitude 0 ~ 4000m
The information in this document may contain predictive statements including, without limitation, statements regarding the future Shenzhen 518129, P.R. China
www.huawei.com
TP48400B-N20B3
Introduction
rectifiers and 4 groups of batteries in maximum.
Features

 Can accommodate 4 groups of batteries, providing better use of space

 Intelligent battery management functions, helping prolong battery

lifespan
 Battery anti-reversed polarity function to avoid danger caused by

reversed polarity connection
 Abundant I/O ports, including 5 AI, 9 DI and 8 dry contract output
 Realizing centralized and remote site monitoring by zero additional TP48400B-N20B3


Specifications
Weight ≤100kg(without rectifier modules or batteries)
Installation mode Ground installation(antistatic floor or ground installation)

System Cabling mode Top inlet and top outlet
Input mode 220/380V three-phase four-wire
Input voltage 85~300VAC (L-N)

AC Input frequency 45~66Hz, rated value: 50Hz/60Hz
Distribution
Output voltage -42~-58VDC, rated value: -53.5VDC
DC Battery branch MCB: 4x125A/1P
Distribution LLVD branch MCB: 2x100A/1P, 2x63A/1P, 4x32A/1P, 2x16A/1P
BLVD branch MCB: 4x63A/1P, 2x16A/1P, 2x10A/1P
Power efficiency PSU: >96%*

Rectifier
Weight ≤2kg
5 AI(Battery temp., ambient temp., ambient humidity, temp1, temp.2)

Signal input
Display mode LCD
Operating temperature -10℃~+45℃(including batteries)
Storage temperature -40℃ ~+70℃

Environment
Altitude 0~4000m
www.huawei.com
TP48600B-N20B1
Introduction
rectifiers and 3 groups of batteries in maximum.
Features

 Can accommodate 3 groups of batteries, providing better use of space

 Intelligent battery management function helps to prolong battery

lifespan
 Battery anti-reversed polarity function to avoid the danger of device

caused by reversed polarity
 Realizing centralized and remote site monitoring by zero additional

TP48600B-N20B1

Specifications
Weight ≤130kg (without rectifier modules or batteries)
Installation mode Ground installation (Antistatic floor or ground installation)

System
Cabling mode Top inlet and top outlet
Default: 220/380V three-phase four-wire;

Input mode
Can transform to 220V three-phase three-wire on site
Input voltage 85~300VAC

AC
Input frequency 45~66Hz, rated value: 50Hz/60Hz
Distribution
Output voltage 42~58VDC, rated value: 53.5VDC
Battery branch Fuse: 4x250A

DC
Fuse(NT00): 4x160A
Distribution LLVD branch
MCB: 2x63A/1P, 6x32A/1P, 2x10A/1P
BLVD branch MCB: 2x63A/1P, 2x32A/1P, 2x10A/1P
Power efficiency PSU: >96%*

Rectifier
Weight ≤2kg
5 AI(Battery temp., ambient temp., ambient humidity, temp1, temp2)

Signal input
Display mode LCD
Operating temperature -10℃~+45℃( including batteries)
Storage temperature -40℃~+70℃

Environment
Altitude 0~4000m
www.huawei.com

Indoor Integrated Power System: TP48200B-N20B2

Uploaded by

Copyright:

Available Formats

Indoor Integrated Power System: TP48200B-N20B2

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Indoor Integrated Power System: TP48200B-N20B2

Uploaded by

Copyright:

Available Formats

Indoor Integrated Power System

 1U rectifier: high density(42.7W/inch3), high efficiency(>96%), excellent

 Compatible with high-temperature batteries, saving site cooling cost by

 Intelligent battery management functions, helping prolong battery lifespan

 Battery anti-reversed polarity function to avoid the danger caused by

 Abundant I/O ports, including 5 AI, 9 DI and 8 dry contract output

 Realizing centralized and remote site monitoring by zero additional

 Wireless access network

 Fixed access network

 Enterprise communication network

Product Type TP48200B-N20B2

Weight ≤100kg (without rectifier modules or batteries)

Cooling mode Natural cooling

Installation mode Ground installation (Antistatic floor or ground installation)

System Cabling mode Top inlet and top outlet

Protection level IP20

Battery space 16U(2 groups×150Ah)

User space 16U

220/380V three-phase four-wire

AC Input voltage 85~300VAC (L-N)

Distribution Input frequency 45~66Hz, rated value: 50Hz/60Hz

Input capacity MCB: 1x63A/3P

SPD 20kA/40kA, 8/20μs

PVDU input(optional with SSU) MCB: 4×63A/1P

Output voltage -42~-58VDC, rated value: -53.5VDC

Maximum capacity 12kW(4×3000W)

BLVD branch MCB: 2x32A/1P, 3x16A/1P, 1x10A/1P;

SPD 10kA/20kA, 8/20μs

Max. output power 3000W

Max. configurable num. of SSU 2 pcs

Rectifier Power efficiency

5 AI(Battery temp., ambient temp., ambient humidity, temp1, temp.2)

Alarm output 8 dry contacts

Storage capacity Up to 50000 historical records and alarm

Display mode LCD

Operating temperature -10℃~+45℃(including batteries)

Storage temperature -40℃ ~+70℃

Product Type TP48300B-N04C2

Weight ≤30 kg (Without rectifier modules)

Cooling mode Natural cooling

Cabling mode Top inlet and top outlet

Maintenance mode Front and top operation and maintenance

SPD 20 kA/40 kA, 8/20 μs

Output voltage -42~-58 Vdc, rated -53.5 Vdc

Maximum capacity 18 kW (6×3000 W)

DC Battery branch(fuse) 2x160 A (fuse)

Distribution LLVD branch(MCB) 1×100 A/1P, 2×80 A/1P

BLVD branch(MCB) 1×63 A/1P, 1×32 A/1P, 2×16 A/1P

SPD 10 kA/20 kA, 8/20 μs

Rated power 3000 W(176 Vac ～ 290 Vac)

Power efficiency >96%

Working temperature -40℃ ~ +75℃

Rectifier Dimensions 105mm (W) ×281mm (D) × 40.8mm (H)

Power factor ≥0.99

3 AI (Battery temp., ambient temp., ambient humidity)

Alarm output 8 dry contacts

Storage capacity Up to 2000 historical records

Display mode LCD

Operating temperature -10℃ ~ +50℃