My Courses: Home UGRD-IT6223-2013T Week 2: Basic Switching Concepts and Configuration Quiz 002
My Courses: Home UGRD-IT6223-2013T Week 2: Basic Switching Concepts and Configuration Quiz 002
My Courses: Home UGRD-IT6223-2013T Week 2: Basic Switching Concepts and Configuration Quiz 002
c. FTP
d. HTTP
Clear my choice
c. 8080
d. 22
Clear my choice
Question 3 Which of the following is the command to configure the IP domain name of the network
Not yet (mycompany.com)
answered
b. Ip configure mycompany.com
c. Ipconfig mycompany.com
d. Ip domain-name mycompany.com
Clear my choice
Question 4 What is the command to set the IP address (192.168.10.2) and subnet mask (255.255.0.0) for specific
Not yet Fast Ethernet interface?
answered
e. ip 192.168.10.2 255.255.0.0
Clear my choice
Question 5 Which of the following is the command to configure the switch default gateway with IP address of
Not yet 172.10.90.1?
answered
c. Ip default-gateway 172.10.90.1
Clear my choice
Question 6 What type of DHCP attack where in an attacker configures a fake DHCP server on the network to issue
Not yet DHCP addresses to clients. The normal reason for this attack is to force the clients to use false Domain
answered
Name System (DNS) or Windows Internet Naming Service (WINS) servers and to make the clients use
Marked out of the attacker, or a machine under the control of the attacker, as their default gateway.
1.00
Select one:
a. DHCP starvation attack
Clear my choice
Question 7 What is the command to configure the interface to automatically negotiate speed with the connected
Not yet device?
answered
b. speed auto
Clear my choice
Question 8 This is a proprietary protocol that all Cisco devices can be configured to use. This checks other Cisco
Not yet devices that are directly connected, which allows the devices to auto-configure their connection.
answered
Clear my choice
c. 80
d. 22
Clear my choice
Question 10 Global configuration mode is used to configure system globally, or to enter specific configuration
Not yet modes to configure specific elements such as protocols. What is the command to enter global
answered configuration mode?
Marked out of
1.00
Select one:
a. configure terminal
b. config global
c. set global
d. config device
e. enter global
Clear my choice