Novus NVC-HC500 SC500 SDN500 ENG
Novus NVC-HC500 SC500 SDN500 ENG
Novus NVC-HC500 SC500 SDN500 ENG
instrukcja obsługi
NVC-HC500
NVC-SC500
NVC-SDN500
NVC-HC500, NVC-SC500, NVC-SDN500 Color and Day/Night Cameras, User’s Manual
Page 2
u s e r ’s m a n u a l
NVC-HC500
NVC-SC500
NVC-SDN500
NVC-HC500, NVC-SC500, NVC-SDN500 Color and Day/Night Cameras, User’s Manual
TABLE OF CONTENTS
Technical modification are subject to change without prior notice. Misprints reserved.
Page 4
NVC-HC500, NVC-SC500, NVC-SDN500 Color and Day/Night Cameras, User’s Manual
This symbol indicates that dangerous voltage constituting a risk of electric shock is present
within this unit.
This symbol indicates that there are important operating and maintenance instructions in the
literature accompanying this unit.
IMPORTANT
Page 5
NVC-HC500, NVC-SC500, NVC-SDN500 Color and Day/Night Cameras, User’s Manual
2. Specifications:
FRATURESTURES
FEATURES:
Page 6
NVC-HC500, NVC-SC500, NVC-SDN500 Color and Day/Night Cameras, User’s Manual
Model
NVC-SDN500-2 NVC-SDN500-3
Pick up
1/3”CCD, Interline Transfer SONY Super HAD
element
Resolution 380 TVL
Min. Illumination 0.1 lx/F=1.4 - color mode
0.0 lx - b/w mode, IR on
S/N Ratio > 48dB (AGC off)
AGC On/Off
Day&Night Auto
Sync. System Internal
Electronic Shut-
1/50s ~ 1/100 000s
ter
Video Output 1.0 Vp-p/75 Ohm (BNC)
Lens Mount C/CS
Back Light Com-
On/Off Selectable
pensation
Iris Mode V or D Selectable
Power Supply 12 VDC / 24 VAC 230 VAC
Power Consump-
2.8 W 3W
tion
Operating Tem-
-5oC ~ 40oC
perature
Dimensions (mm) 124 (W) x 62 (H) x 57 (D)
Wright 430 g
Page 7
NVC-HC500, NVC-SC500, NVC-SDN500 Color and Day/Night Cameras, User’s Manual
FRONT
1 5
2 4
Page 8
NVC-HC500, NVC-SC500, NVC-SDN500 Color and Day/Night Cameras, User’s Manual
BACK
Page 9
NVC-HC500, NVC-SC500, NVC-SDN500 Color and Day/Night Cameras, User’s Manual
1. FL (Flickerless)
If the camera is used with 50Hz fluorescent lighting, there maybe flicer on the scre-
en. In this case, FL switch should be set to ON position. But, FL switch should be set
to OFF position if 60Hz power source is used.
Page 10
NVC-HC500, NVC-SC500, NVC-SDN500 Color and Day/Night Cameras, User’s Manual
4. Connection:
LENS
The lens is not supplied with this camera. Purchase a lens suitable for your environment.
This camera accepts the auto iris lens and both C-and CS-mount lens.
NOTES:
- If the lens is marked with fingerprints or other marks, the image quality might be poor.
- It is recommended to use a high quality lens to improve the image quality under low
illumination.
- For using main functions it is recommended to use Auto Iris Lens with DC type.
1. Peel approximately 8mm from the end of the lens cable outer cover.
2. Peel approximately 2mm from the end of the cable inner cover.
3. Remove the cover from the ins lens plug supplied, and solder the lens cable to the
plug as shown below.
Page 11
NVC-HC500, NVC-SC500, NVC-SDN500 Color and Day/Night Cameras, User’s Manual
4. Remove the protective cap, and attach the lens to the camera by turning clockwise.
5. Connect the lens plug to the auto iris connector on the right side of trie camera.
6. Set the DC/ VIDEO/ ELC selection switch to DC or VIDEO or ELC according to the
type of the lens.
After removing the protecting cap, attach the lens into ttie camera by turning cloc-
kwise.
Page 12
NVC-HC500, NVC-SC500, NVC-SDN500 Color and Day/Night Cameras, User’s Manual
NOTES:
- Use the lens under the specification as shown. Otherwise the lens can damage the camera
or abnormal fixing may result.
- A heavy lens may disturb the balance with the camera and possibly result in damage. Don’t
use a lens heavier than 450g.
Page 13
NVC-HC500, NVC-SC500, NVC-SDN500 Color and Day/Night Cameras, User’s Manual
CONNECTING TO POWER
Each model has different power specification, please check the name of the model and
power specification before connecting to power source.
Please refer to the sticker identifying the model, which is attached on the product, for power
specification.
NOTES:
- Be sure to connect power after all the installation is done.
- Note that AC adaptor is not supplied with camera.
- Use only AC 24V/DC12V UL listed class 2 power supply.
- Do not use power sources other than that specified.
Page 14
NVC-HC500, NVC-SC500, NVC-SDN500 Color and Day/Night Cameras, User’s Manual
CONNECTING TO MONITOR:
monitor
camera
As the connecting method varies with the instruments, refer to the manual supplied
with the instrument.
Connect the cable after power is turned off.
Set the 75Ω/ Hi-Z selection switch as shown below if you have an intermediate
device.
CCD camera Intermediate End monitor
Page 15
NVC-HC500, NVC-SC500, NVC-SDN500 Color and Day/Night Cameras, User’s Manual
5. Troubleshooting:
If you have trable operating your camera, refer to folowing table. If the guidelines do not
enable you to solve the problem, contact an authorized technician.
6. Composition:
1. Camera……………..…………….
3. L-Wrench……………..………….
4. C-Mount Adapter…………………….
5. Instruction Manual…………………
Page 16
NVC-HC500, NVC-SC500, NVC-SDN500 Color and Day/Night Cameras, User’s Manual
Page 17
NOVUS Security Sp. z o.o.
Pulawska Street 431, 02-801 Warsaw, Poland
phone.: (22) 546 0 700, fax: (22) 546 0 719
www.novuscctv.com
2005-03-07.