Longse LIV40SHE Color Camera Manual
Longse LIV40SHE Color Camera Manual
Longse LIV40SHE Color Camera Manual
Model LIV40SHE
LIV40SHE Color Camera
Pick up Element 1/3" SONY EXview HAD CCD II
0.001 Lux/F1.2
Minimum Illumination
0Lux (with IR LED ON)
S/N Ratio More than 52dB
Power/Current DC12V(+/-10%)/500mA
Storage Temperature -30~+60℃ RH95% MAX Notes:Before providing power for the
Operating Temperature -10~+50℃ RH95% MAX
camera, please read this User Guide in
detail!
1.
Weatherproof IR Color Camera LIV40SHE 1
2. LIV40SHE
User Guide 1
BRIEF OF PRODUCT CONNECTING INTRODUCTION
HIGH LUMINANCE MODE:SHUT+AUTO IRIS/AUTO The symbol is intended to alert the user to the presence of
IRIS DC12V Power Supply
important operating and maintenance (servicing)
BRIGHTNESS:0-255
AUTO TROUBLE AND SOLUTION Instructions in the literature accompanying the appliance.
LOW LUMINANCE MODE:OFF/AGC
SHUTTER/
BRIGHTNESS: ×0.25, ×0.5, ×0.75, ×1
The symbol is intended to alert the user to the presence of
AGC
1. No Picture after providing power uninsulated ‘dangerous voltage’ within the product’s
MODE:SHUT+AGC
. May be the power supply voltage abnormity, please check the power enclosure that may be of sufficient Magnitude to
SHUTTER:1/50,1/120,1/250,1/500,1/1000,1/2000,
MANUAL
1/4000,1/10000 supply voltage and pole whether exactitude. a risk of electric shock to persons.
AGC:6,12,18,24,30,36,42,44.8
. Please check all the connecting cable and monitors whether be connected
correctly or not.
ATW SPEED/DELAY CNT/ATW FRAME/ENVIRONMENT CAUTION:
WHITE BAL
PUSH/ANTI CR/PUSH LOCK/USER1/USER2/MANUL 2. The picture level direction have flowing interference ripples RISK OF ELECTRIC. DO NOT OPEN
. May be caused by the power supply AC ripples, it need filter the wave of the
BACK LIGHT OFF/BLC/HLC CAUTION: TO REDUCE THE RISK OF ELECTRIC
power supply. SHOCK
PICT . Check the monitor and peripheral equipments used.
MORROR/BRIGHTNESS/CONTRAST/SHARPNESS/HUE/GAIN DO NOT REMOVE COVER OR BACK NO USER
ADJUST
SERVICEABLE PARTS INSIDE. REFER SERVICING
OSD SET OFF 3. The picture background color changes continuously
ATR
ON LUMINANCE/CONTRAST . The fluorescent lamp’s electromagnetic field cause color roll. This is proper
CAUTION: TO PREVENT ELECTRIC SHOCKS AND RISK OF
phenomenon of the cameras.
OFF
FIRE HAZARDS, DO NOT USE OTHER THAN
MOTION . Reduce the fluorescent lamp numbers or increase the distance between the SPECIFIED POWER SOURCE.
DET ON
DETECT SENCE/BLOCK DISP/MONITOR AREA/ camera and the fluorescent lamps can improve it.
AREA SEL/TOP/BOTTOM/LEFT/RIGHT . Use power supply external sync. camera can solve it.
OFF
PRIVACY 4. The picture smear too mass
AREA SEL/TOP/BOTTOM/ LEFT/RIGHT/
ON
COLOR/TRANSP/MOSAIC . The power supply’s voltage unstable.
COLOR . Connecting cables not connect correctly or have high impedance.
Note:
B/W BURST:OFF/ON
DAY/NIGHT
BURST:OFF/ON ● Please note the camera’s operating temperature and its using
AUTO Notes:
environment requirement. Avoid using the camera at too high
DELAY CNT/DAY-NIGHT/NIGHT-DAY
or too low temperatures. The operating temperature is -
NR NR MODE:Y/C,OFF,Y,C ●The power supply must through safe attestation. Its output voltage, 30~+60℃. (Recommendatory operating temperature is -
current, voltage polarity and operating temperature must match the 10~+50℃.)
CAMERA ID OFF/ON
camera’s requirement. ● Never make the camera face the sun or bright object.
SYNC INT ●When using the camera in the thunderbolt condition,please note to Otherwise, it will damage the CCD.
ENGLISH/CHINESS/JAPANESS/ESPANOL/PORTUGUES/ mount Anti-thunder device or put off the power supply plug and cable. ● Do not mount the camera near by the radiator or heater.
LANGUAGE
PYCCKNN/FRANCAIS/DEUISCH ●In order to capture high quality pictures, the power supply’s cable and
CAMERA RESET/BACK/EXIT/SAVE ALL video output cable should not be too long.