4000 Series: Diesel Engine - Electropak 2083 KWM at 1500 RPM Net Standby Power

4000 Series 4016-61TRG3 Diesel Engine – ElectropaK
2083 kWm @ 1500 rpm net standby power
The Perkins® 4000 Series family of 6, 8, 12 and 16

cylinder diesel engines was designed in advance of today’s
uncompromising demands within the power generation
industry and includes superior performance and reliability.
The 4016-61TRG3 is a turbocharged, air-to-water charge-

cooled, 16 cylinder diesel engine.
Its premium design and specification features provide economic

and durable operation as well as exceptional power to weight
ratio, improved serviceability, low gaseous emissions, overall
performance and reliability essential to the power generation
market. The 4016-61TRG3 is specially tuned for improved load
acceptance response in standby duty.
Specification
Number of cylinders 16 60º Vee form
Bore and stroke 160 x 190 mm 6.3 x 7.5 in
Displacement 61.123 litres 3730 in3
Aspiration Quad turbocharged. air to water charge cooled
Cycle 4 stroke
Combustion system Direct injection
Compression ratio 13:1
Rotation Anti-clockwise, viewed from flywheel end
Total lubricating capacity 237.2 litres 62.7 US gal
Cooling system Water-cooled
Temperate Tropical
Total coolant capacity 260 litres 68.7 US gal 270 litres 71.3 US gal
www.perkins.com
Photographs are for illustrative purposes only and may not reflect final specification.
All information in this document is substantially correct at time of printing and may be altered subsequently.
Final weight and dimensions will depend on completed specification.
Publication No. PN3060/07/16 Produced in England ©2016 Perkins Engines Company Limited
Features and benefits
Dependable power
l Individual 4 valve cylinder heads give optimised gas flows
l Unit fuel injectors ensure ultra fine fuel atomisation and hence controlled rapid combustion
l Commonality of components with other engines in the 4000 Series family for reduced stocking levels
l Capable emissions of TA Luft (1986)
Low operating costs

l Oil change service intervals are set at 500 hours as standard
l Designed to provide low cost of ownership, simple maintenance and reduced downtime
l Class leading warranty
Prime power - 12 months unlimited hours. For engines that operate less than 6,000 hours the warranty is available
for two years or until the application reaches 6,000 hours (whichever is sooner).
Standby power - three years or 1,500 hours (whichever is sooner).
See Perkins Warranty Policy for further details
l Perkins Platinum Protection - comprehensive cover from as little as 5 percent* of the cost of your engine
Talk to your local distributor or visit www.perkins.com/platinum protection for more details
World class product support

l Our experienced global network of distributors and dealers, fully trained engine experts deliver total service support
around the clock, 365 days a year. They have a comprehensive suite of web based tools at their disposal, covering
technical information, parts identification and ordering systems, all dedicated to maximising the productivity of your
engine
l Perkins actively pursues product support excellence by insisting our distribution network invest in their territory to
provide customers with a consistent quality of support across the globe
l Throughout the entire life of a Perkins engine, we provide access to genuine parts giving 100% reassurance that
you receive the very best in terms of quality for lowest possible cost, wherever your Perkins powered machine is
operating in the world
To find your local distributor: www.perkins.com/distributor
*Terms and conditions apply
www.perkins.com
Technical information
Air inlet
l Mounted air filter and turbocharger
Fuel system
l Direct fuel injection system with fuel lift pump
l Digital governing to ISO 8528-5 class G2 with isochronous capability
l Full-flow spin-on filters
Lubrication system
l Wet full aluminium sump with filler and dipstick
l Full flow spin-on oil filters
Cooling system
l Twotwin thermostats
l Systemdesigned for ambient temperatures of up to 50°C
l Raw water pump
Electrical equipment
l 24V starter motor and 24V alternator with integral regulator and DC output
l Turbine inlet temperature protection
l Twin high coolant temperature protection switch
l Twin low oil pressure protection switch
Flywheel and housing

l Flywheel to SAE J620 Size 18
l SAE 0 flywheel housing
Optional equipment
l 4 metre wiring harness
l Secondary electric start
l Immersion heater
l Single exhaust outlet pipe
l Exhaust counter flanges
l Temperate radiator kit
l 21” flywheel
l Removal of raw water pump
www.perkins.com
Engine package weights and dimensions

Temperate Tropical
Length 4542 mm 179 in 4562 mm 180 in
Width 2185 mm 86 in 2185 mm 86 in
Height 3175 mm 125 in 3736 mm 147 in
Weight (dry) 5570 kg 12280 lb 5570 kg 12280 lb
www.perkins.com
Typical generator Engine power

Speed Type of output (Net) Gross Net
rpm operation
kVA kWe kWm hp kWm hp
Baseload power 1800 1440 1600 2144 1500 2010
1500 Prime power 2250 1800 1975 2647 1875 2513
Standby power 2500 2000 2183 2925 2083 2791
The above ratings represent the engine performance capabilities within plus or minus 3% at the reference conditions equivalent to those specified in
ISO 8528/1, ISO 3046/1, BS 5514/1.
Ratings conditions: 25ºC air inlet temperature, barometer pressure 100 kPa, relative humidity 30%. Please consult your distributor or the factory for
ratings in ambient conditions. Note: For full ratings please refer to Perkins Engines Company Limited. All electrical ratings are based on an average
alternator efficiency and a power factor of 0.8. Fuel specification: BS 2869 Class A1 + A2 or ASTM D975 No 2D.
Rating definitions
Continuous baseload: Power available for continuous full load operation. No overload is permitted. Prime power: power available for variable load
with an average load factor not exceeding 80% of the prime power rating in any 24 hour period. Overload of 10% permitted for 1 hour in every
12 hours operation. Standby (maximum): Power available at variable load in the event of a main power network failure for a maximum of 500 hours
per year. No overload is permitted.
Fuel consumption at 1500 rpm Fuel consumption at 1500 rpm

Percent of prime power
g/kWh l/hr
Standby power 209 529
Prime power 205 470
Baseload power 200 371
75% 200 344
50% 204 234
25% 220 126
www.perkins.com

4000 Series: Diesel Engine - Electropak 2083 KWM at 1500 RPM Net Standby Power

Uploaded by

Copyright:

Available Formats

4000 Series: Diesel Engine - Electropak 2083 KWM at 1500 RPM Net Standby Power

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

4000 Series: Diesel Engine - Electropak 2083 KWM at 1500 RPM Net Standby Power

Uploaded by

Copyright:

Available Formats

4000 Series 4016-61TRG3 Diesel Engine – ElectropaK

2083 kWm @ 1500 rpm net standby power

The Perkins® 4000 Series family of 6, 8, 12 and 16

The 4016-61TRG3 is a turbocharged, air-to-water charge-

Its premium design and specification features provide economic

Features and benefits

l Capable emissions of TA Luft (1986)

Low operating costs

World class product support

*Terms and conditions apply

l Twin low oil pressure protection switch

Flywheel and housing

l Single exhaust outlet pipe

l Exhaust counter flanges

l Temperate radiator kit

l Removal of raw water pump

Engine package weights and dimensions

Typical generator Engine power

Fuel consumption at 1500 rpm Fuel consumption at 1500 rpm

You might also like