JoeCo BBSG24MP User Guide

BLACKBOX
BBSG24MP
SOUNDGRID™ RECORDER
User Manual
V 3.2 rev 1 Date: June 2018
BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2 Page | 1

Congratulations on your purchase of the JoeCo BlackBox BBSG24MP Recorder. This
document will lead you through the basics of how to set up and use the product. The
Recorder has been designed to be as simple as possible to set up and operate.
Consequently you will find that this user manual is not a long document and can be
read from cover to cover in a short while. However, we strongly recommend that you
do read it just in case there are some aspects of the product that are not immediately
obvious.
This manual only covers the BBSG24MP Recorder with built in Mic Preamps and
interface to the Waves™ Soundgrid™ network
More information is available in the LOGIN area of the JoeCo Website

www.joeco.co.uk . Visitors can gain immediate access to more detailed information
whilst EndUsers, once approved, are eligible for software upgrades and other
downloads.
IF YOU NEED INFORMATION IN A HURRY, REGISTER AS A

VISITOR AND UPGRADE TO AN ENDUSER LATER ON.
The SoundGrid interface on the BBSG24MP has been developed in collaboration with
WAVES Audio Limited. Most of the testing of this product has been performed with
the WAVES LV1 Live mixing console for which the BBSG24MP can act as both a stage
box with Mic Preamps and a recorder.
© JoeCo Limited 2009 - 2018. E&OE. All rights reserved. All trademarks and names are
recognised as the property of their respective owners
Page | 2 BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2

Contents
BLACKBOX .................................................................................................................... 1
BBSG24MP ................................................................................................................... 1
SOUNDGRID™ RECORDER ............................................................................................ 1
Important Safety Information .................................................................................................. 4
WARNING - Read the following before proceeding : ........................................................... 4
Copyright Warning ................................................................................................................... 5
Opening the Box ....................................................................................................................... 6
Box Contents ....................................................................................................................... 6
Controls and interfaces ............................................................................................................ 7
Front Panel .......................................................................................................................... 7
Rear Panel ........................................................................................................................... 8
Installation................................................................................................................................ 9
How to wire up the BBSG24MP ........................................................................................... 9
Power connection ............................................................................................................... 9
Connecting to the SoundGrid Network ............................................................................. 10
Using the BBSG24MP for Recording with SoundGrid ........................................................ 10
SoundGrid Software .......................................................................................................... 11
System Inventory Tab ........................................................................................................ 12
Assigning a BBSG24MP to a Device Rack ........................................................................... 12
Adjusting the Mic Preamp settings .................................................................................... 13
Choosing and connecting a disk drive ............................................................................... 13
Checking that everything works ........................................................................................ 14
Normal Operation .................................................................................................................. 16
Setting up .......................................................................................................................... 16
Recording .......................................................................................................................... 17
Playback ............................................................................................................................ 18
File Names ......................................................................................................................... 19
Playback and Virtual Sound Checking ................................................................................ 21
Monitoring ........................................................................................................................ 22
Summary of Combined Front Panel Controls .................................................................... 23
Using the Menu ...................................................................................................................... 24
Menu structure and operation .......................................................................................... 24
Setting up adjustable parameters ..................................................................................... 25
Software updates ................................................................................................................... 33
Linking multiple BlackBox Recorders together ....................................................................... 35
Using a PS2 keyboard ............................................................................................................. 37
Troubleshooting ..................................................................................................................... 39
Safe’n’Sound Record Recovery .......................................................................................... 40
Summary Of Alert Messages ............................................................................................. 41
JoeCo Conditions of Use ......................................................................................................... 43
Software Licence Agreement ............................................................................................ 45
Warranty Information ....................................................................................................... 49
Product Returns ................................................................................................................ 51
Product and End User Registration.................................................................................... 52

Important Safety Information
WARNING - Read the following before proceeding :
Read instructions: Retain these safety and operating instructions for future
reference. Adhere to all warnings printed here and on the equipment. Follow the
operating instructions printed in this User Guide.
Do not remove covers: Operate the equipment with its covers correctly fitted. Refer
any service work on the equipment to competent authorised technical personnel
only.
Power sources: Connect the equipment using the mains power adapter supplied.
Power cord routing: Route power cords so that they are not likely to be walked on,
stretched or pinched by items placed upon or against them.
Grounding: Do not defeat the grounding and polarisation means of the power cord
adapter or plug. Do not remove or tamper with any ground connection in the power
cord.
Water and moisture: To reduce the risk of fire or electric shock do not expose the
equipment to rain or moisture or use it in damp or wet conditions. Do not place
containers of liquid on it which might spill into any openings.
Ventilation: Do not obstruct any ventilation. If the equipment is to be operated in a
flight-case ensure that it is constructed to allow adequate ventilation.
Heat and vibration: Do not locate the equipment in a place subject to excessive heat
or direct sunlight as this could be a fire hazard. Locate the equipment away from any
devices which produce heat or cause excessive vibration.
Servicing: Unplug the power immediately if the unit is exposed to moisture, spilled
liquid, the power adapter becomes damaged, during lightening storms, or if smoke,
odour or noise is noticed. Refer servicing to qualified technical personnel only.
Installation: Install the equipment in accordance with the instructions printed in this
User Guide. Use the equipment connections for their intended purpose only.
Precautions
Environment: Protect from excessive dirt, dust, heat and vibration both when
operating and storing. Avoid drinks spillage, tobacco ash, smoke, and exposure to
rain and moisture. If the equipment becomes wet, remove power immediately. Allow
to dry out thoroughly before using again.
Cleaning: Avoid the use of chemicals, abrasives or solvents. The equipment is best
cleaned with a dry lint-free cloth. Do not remove the cover to clean the unit.

Damage: To prevent damage to the equipment cosmetics, avoid placing heavy
objects on the unit, scratching the surface with sharp objects, or subjecting the unit
to rough handling and vibration.
Transporting: The equipment should be transported in the original packing or
purpose built flight case to protect it from damage during transit.
Cables: Plan the location of the equipment so that the connecting cables are not fully
extended. Full extension of the cables can stress the equipment and cables and may
result in undesired performance. Ensure that all cables are located such that they
cannot be stood on or tripped over. The 25way D-sub connectors should not be over
tightened and you should provide adequate strain relief to ensure that the weight of
the cable looms does not rely on the D-type connectors themselves. Tie them to the
rack with cable ties.
Copyright Warning
JoeCo’s recorder products are designed to enable you to record and reproduce
material to which you own the copyright, or material which the copyright owner has
granted you permission to record and/or reproduce.
It is illegal to record, reproduce, distribute, sell, hire, lend, perform or broadcast all or
part of a work (written or musical composition, broadcast, performance or similar)
whose copyright is held by a third party without permission of that third party.
Do not use this Product for purposes that could infringe a copyright held by a third
party. JoeCo and its authorised distributors and resellers assume no responsibility
whatsoever with regard to any infringements of third-party copyrights arising
through your use of this Product.

Opening the Box
Box Contents
Inside the box you will find the following:
 BlackBox BBSG24MP Recorder
 Power Supply
 User Manual
The BlackBox Recorder is not a standard multitrack recorder nor is it a digital audio
workstation (DAW). It has been designed specifically to capture multitrack audio in
live acquisition applications. It will typically be used to record audio material onto a
USB2 drive for subsequent editing and processing in a DAW.
A number of specific features have been added to make it suitable and safe in a live
environment such as playback lockout, protection against accidentally ending a
recording, no general purpose operating system, etc.
Some features often found in other multitrack machines are not present in the
BlackBox Recorder such as overdubbing and punch in facilities.

Controls and interfaces
Front Panel
The front panel of the BlackBox Recorder contains user controls for the unit. The
buttons are all touch sensitive which prevents them wearing out through constant
use – just place the flat of your finger on the button to operate.
Control buttons
O
Data
Headphones
Metering Transport Display

Wheel Controls
The left hand side of the unit contains the metering section. Each channel or Track [1
through 24] has 3 rows of metering LEDs above the Track Arming LEDs.
Green = signal present: dimly lit at approx -45dBFS; bright at -22dBFS,
Yellow = good signal level: dim at -22dBFS; bright at -10dBFS
Red = getting hot / clip: dim at -10dBFS; bright red at 0dBFS
The metering LEDs get brighter as the signal level gets louder and the Red LED can be
set to stay on when an overload occurs. The meters are positioned above a two
colour LED that indicates whether the track is armed ready for recording or not
(Green for playback ready; Red for record ready). There are also indicators for power,
Disk activity and Playback Lockout
To the right of the JoeCo logo is the control wheel which has a number of functions
explained later.
Then there are the main Transport controls [PLAY, STOP, RECORD] with the four
other control buttons above [L-R: BACK, MARK, LOOP, MENU].
Finally, at the right hand side of the front panel is the colour LCD display. This is the
primary user interface and shows the current mode of operation along with settings
and any error messages. Most screens are colour coded to more easily see what is
happening from a distance.

Rear Panel
The rear panel will look slightly different depending on which style of audio interface
you have on your BlackBox Recorder. The areas indicated in the diagram below are
explained in more detail later in this manual.
Video/WC
Power
SoundGrid
Mic / line inputs
Option Card
Timecode
Balanced Analogue outputs
Headphones
Keyboard
Remote
Clocks
JoeCo
Disk
The upper three 25 way D-type (also called D-sub) connectors are the main
microphone / line analogue input connectors. The lower three D-type connectors are
the balanced outputs. The cable looms should conform to the TASCAM standard for
analogue i/o. (N.B. all pin outs are available on the visitor page of the JoeCo website
Login area)
The 9-pin socket should connect to the JoeCoRemote hardware which allows full
control of the unit using an iPad. This is the recommended method of controlling the
BBSG24MP.
Linear timecode can be provided on the tip of the ¼” jack socket; the ring of the same
socket is for a momentary contact closure or footswitch. The BNC connector can
accept either a Video or WordClock clocking signal
A PS2 keyboard socket allows control and text input from a standard PS2 style
keyboard.
Power is provided by the supplied external power supply via the Kycon 4 pole
connector (pin 1&3 = GND, 2&4 = +12V @ 3.3A)
The rest of the rear panel is fairly self explanatory we hope and is explained in
greater detail later in this manual. There are more technical details on the JoeCo
website (www.joeco.co.uk) should you require them.

Installation
How to wire up the BBSG24MP
Audio connections
If you have also purchased the optional BBSG24MP Break Out Box (BOB), this will
have been supplied with three 25way D-sub to D-sub cable looms which plug directly
between the upper row of connectors on the back of the BBSG24MP unit and the D-
subs on the BOB. You can then use the XLR-F connectors on the BOB to plug your
microphones or line sources into the unit.
Alternatively you can use 25way D-sub to XLR-F cables looms (one for each bank of 8
channels). These are wired to the TASCAM analogue format and can be purchased
through your supplier.
The analogue audio outputs, if required, are line level and appear on the lower row
of 25way D-sub connectors. They use the same pin out (TASCAM analogue format) as
the input connectors.
The BlackBox Recorder line outputs can be switched between Low and Pro levels in
the Setup Menu (page 30).
Setting LOW PRO

Nominal level -10dBu +4dBu
Headroom above nominal level 14dB 18dB
0dBFS (when digital clipping will occur) +4dBu +21dBu
The headphone socket on the BBSG24MP can be used to monitor the internal Pre
Fade Listen (PFL) bus to allow for monitoring individual channels.
Power connection
The BBSG24MP is supplied with its own power supply which plugs into the dc inlet at
the rear right of the unit (or left if you’re looking at the rear as you read this).
Although the unit can accept a suitable regulated dc input from a 12V battery
powered cart for example it should always be used with the power supply provided if
possible. A mounting lug is provided to cable tie the power cable if you wish.

Connecting to the SoundGrid Network
The connection to the SoundGrid network is via an Ethernet cable. A standard RJ45
style connector is sited on the SoundGrid option card on the rear panel of the
BBSG24MP unit alongside a status LED and a reset switch. JoeCo recommend using
Category 5e cable or better to handle the data rates but please check with your
supplier in case there have been more recent recommendations from either Waves
Audio or JoeCo. https://www.waves.com/support/ethernet-cables-for-soundgrid-systems
Using the BBSG24MP for Recording with SoundGrid

BBSG24MP uses Waves SoundGrid protocol to connect to an eMotion LV1 mixer, to a
MultiRack SoundGrid, and to any DAW. A typical SoundGrid network consists of a
host computer, a SoundGrid server, and I/O devices, all connected with Cat 5e (or
better) Ethernet cables via a 1GB Ethernet switch.
LV1 Touch Screen Host Computer
1GB Ethernet Switch
SoundGrid Server
BBSG24MP
Maximum distances between devices vary depending on configuration. However,

maximum cable length between I/Os and switch is usually 100 meters. When
connecting the Ethernet cable to the device, make sure that the connectors and

the cable are protected from stage equipment and traffic. For up-to-date cable
specifications, visit the Waves Support desk: http://www.waves.com/support.
Do not connect other networks to the SoundGrid switch. Use different network ports
on your computer for other networks (such as internet).
SoundGrid Software
The BBSG24MP can be used with a number of SoundGrid applications, including
eMotion LV1, MultiRack SoundGrid, and SoundGrid Studio. SoundGrid software
drivers are installed with Waves Central, a Waves application for downloading
software and managing licenses.
To install the SoundGrid BBSG24MP Driver:
Launch Waves Central and select INSTALL PRODUCTS

1) Select ONLINE and login to your Waves account
2) Choose “All Waves Products” and search for ‘JoeCo’
3) Locate and select the BBSG24MP driver
4) Click the INSTALL button to start the installation process
When the installation is finished you’ll need to reboot your computer

Download Waves Central and the Waves Central user guide from the Waves
downloads page: https://www.waves.com/downloads/central
System Inventory Tab

All SoundGrid devices must be assigned to a host application. This is done within the
application itself. Assignment is similar across all SoundGrid host applications. You
should refer to the application’s user guide for detailed instructions.
IN the following example a BBSG24MP will be assigned to SoundGrid eMotion LV1
Open the eMotion LV1 application
Select the SETUP window fromteh top toolbar (highlighted in light blue)
Choose the System Inventory Tab (from the left-hand vertical toolbar)
The BBSG24MP can now be assigned in the Device Racks of the System Inventory tab
as shown above.
Assigning a BBSG24MP to a Device Rack

If the BBSG24MP device is not already assigned to the SoundGrid host, click on the
arrow in an empty device slot. And choose the BBSG24MP from the drop down
menu.

The BBSG24MP should then appear in the device rack.
The status LED (visible through the rear panel of the SoundGrid Interface card) can
indicate that everything is working correctly:
 Flashing RED indicates that no SoundGrid host connected or the network
cable is disconnected
 Yellow indicates that a Firmware update is in progress
 Solid Blue indicates that it has connected to the SoundGrid network
 Pressing the ID button next to the cog wheel on the Device Rack will make
the LED flash multiple colours which confirms that communications are
working correctly.
Adjusting the Mic Preamp settings

Clicking on the setup cogwheel icon under the BBSG24MP device will bring up the
input monitor page where you can adjust the individual mic preamps as shown
below.
Choosing and connecting a disk drive

The BlackBox Recorder is not particularly fussy about its Disk Drive. We cannot
guarantee that every drive in the world will work but most do. Critical features are:

 Up to 2TB with USB2 or USB3 interface
 7200rpm recommended
 Formatted with FAT32 Filing System
 Mains powered (except fast USB2 pen drives, aka thumb drives / memory
sticks)
This means that most drives that are both Mac and PC compatible will work ok. USB2
can carry up to 480Mbits/s of data and for recording 24 tracks of 96kHz/24bit the
maximum data rate we need is less than 60MBits/s so there’s normally plenty of
headroom. JoeCo has already tested numerous USB2 drives from Western Digital,
Glyph, Seagate, Verbatim, Samsung, Buffalo and others and found them to work well.
We chose the FAT32 filing system because it is compatible with all major Operating
Systems and it’s also the format chosen for the AES31 digital interchange standard.
USB3 drives are backwards compatible with USB2 and should also work well.
However, bus-powered drives (such as the Western Digital Passport series) typically
draw more current during spin up than the USB2 specification allows (limited to
500mA) and can therefore not be used without providing a separate power supply.
Standard Flash RAM drives (aka Pen Drives) are not fast enough to take the full USB2
data rates that the BBR requires but the fastest ones normally work ok. Larger thumb
drives (128GB and bigger) are typically much faster and usually work very well.
Ask the shop if you can try the drive with the BBR before you buy it.
Plug the disk drive into the USB2 socket on the back of the BBSG24MP unit and then
power up the drive. The drive will be scanned, logged and ready to use in a matter of
seconds. If it takes more than 20 seconds to log the drive or the BlackBox reports
“WRONG DISK FORMAT”, check that the disk is formatted correctly. The BlackBox can
be used to reformat the drive to FAT32 (see page 33)
Checking that everything works

Once you have powered the unit up and the disk drive is connected and powered up
you should be ready to record. Press the record button and away you go!
The basic screen should look something like this when first powered up with a drive
attached.

Normal Operation
Whenever you power up the BBR it first checks the date against its internal real-time
clock. The first time the BBR enters RECORD each day, it creates a folder on the drive
named \YYYY-MM-DD.bbr and makes this the current folder (where YYYY is the year,
MM is the month and DD is the day). [The real-time clock will have been set up at the
factory but you will need to adjust it to your local time – see page 31]
It does this so that all today’s recordings will be kept together in one folder. If you
happen to be recording late into the night past midnight, the BBR will not create a
new folder until the next time it’s powered up so all the recordings during a typical
concert for example will still be kept together.
After you’ve finished recording you can rename the current folder using the NAME
MANAGER Menu or Ctrl-f on a keyboard. The BBR will then create a new folder with
today’s date the next time you enter Record
The front panel controls are all touch sensitive. Just place the flat part of your finger
firmly on the panel over the control – the area your finger covers is more important
than the pressure you apply.
Setting up
Setting up your BBSG24MP will largely be determined by what you are trying to
achieve. If the unit is being used in a TV or Film Sound environment then it’s likely to
be the primary recorder connected directly to the microphones and any other audio
sources. It might be mounted on a cart and thus powered from a 12V battery power
source in which case you may want to disable banks of channels that you are not
currently using to preserve battery life for example
If you are recording a concert, you may want to patch the unit into Mic Splitters at
the stage box and then you need to determine whether phantom power for capacitor
mics is derived from the Monitor console, the FOH console or the BBSG24MP. You
might also want to use the BBSG24MP as the primary mic pre amps and use the
balanced outputs to feed the monitors and PA.
For each channel you will need to set the input to mic or line input level; enable
phantom power if using Capacitor (Condenser) mics; decide whether you need to
insert a High Pass Filter (HPF) to reduce low frequency “pops” and plosives; set the
soft limiter if required; determine whether you need to reverse the phase on any
channel. Then you can adjust the input levels.

Recording
Once set up, the BBR is ready to record within seconds of logging the drive – just
press the REC button and it will begin recording. The record button flashes to show
that it’s creating the files and then turns solid once in record.
The Recording source can be selected between either SOUNDGRID (to record the
output of the mixing console) or ANALOGUE (to record the output of the Mic Preams
directly). This is controlled by pressing MENU and selecting the recording source
Once the unit is recording, the STOP button

must be held down for a couple of seconds to
end the recording. This is to prevent someone
brushing against the controls and accidentally
dropping out of record.
However, if you want to mark the end of one

recording and the start of another you can just
press the REC button again. You can also set MARKS by pressing the MARK button
which will appear in the Cue Chunk of the BWAV files which some DAWs can use and
will enable you to create loops easily for Virtual Sound Checking.
At the end of a recording the BBR will have to do some housekeeping such as closing
the files and writing file headers to the disk to keep it in prime condition. The DISK
LED and the STOP button will flash until the BBR has finished writing to the disk. Wait
until it has finished before starting the next operation. It’s particularly important
that the files have been closed before you unplug the USB disk drive. The BlackBox
will try to recover files that have not been properly closed (see Safe’n’Sound
Record Recovery - page 40) but there’s no guarantee especially if another operating
system has accessed and written to the disk in the meantime).
The BBR remembers its settings in Flash RAM internally so you should only have to
set things up once.

Playback
Normally, the last recording made will be immediately available for playback.
However the BBR may be set to “PLAYBACK LOCKOUT” indicated by the LED in the
Metering area of the front panel in which case
the play button will have no effect. “PLAYBACK
LOCKOUT” is a safety feature that prevents the
operator from accidentally starting to playback
recorded material at an inappropriate time.
If the BBR is set to “PLAYBACK LOCKOUT” and

you want to disable it temporarily to check a
recording, press the MENU button to enter the MENU and PLAYBACK LOCKOUT is the
top item on the list. Press MENU again and it will remove the tick () mark against
PLAYBACK LOCKOUT. Press BACK to exit the MENU and you can now use Playback
normally. PLAYBACK LOCKOUT can be set to manual in the SETUP menu preventing it
automatically engaging after each recording
Fast Wind
FAST FORWARD and REWIND functions within a recording are achieved by holding
the STOP button down whilst moving the data wheel. Playback will then commence
from this position. On the JoeCoRemote, press one of the arrows on the wheel and
then drag.
Selecting Recordings for playback

To select another recording for playback you will need to press the MENU button.
Move the data wheel until Take Select is highlighted; press MENU again; Select
Folder if required and then move the data wheel to select the take you want to play
back; press MENU to confirm.
When a previous recording is loaded for playback, the 24 Green “playback ready”
LEDs positioned underneath the meter section indicate which tracks are present and
ready for playback.
If you load a Take that was recorded at a different sample rate, a warning will be
displayed in the Name area of the main screen showing the original sample rate in
red.

Next / Previous Take
When the BBR is in STOP, the MARK and LOOP buttons will move you to the previous
and next take respectively in the current folder.
Recent Takes
As recordings are made or replayed, they will automatically be placed into the Recent
Recordings list which is located in the Take Select menu. This allows you to quickly
access the days’ Recordings. The Recent Takes list is stored on the disk itself so the
list will change if you use a different disk.
File Names
The BBR names the audio files it creates as follows:
nnn-tt.WAV
Where nnn is the take number (between 001 and 999) and tt is the track number
(between 01 and 24).
The track number is not shown on the main BBR user interface screen but it’s used by
the BBR to determine which file replays through which output and will be vital in post
production.
Renaming Takes
By using the JoeCoRemote or if you plug a PS2 keyboard into the BBSG24MP it is
possible to rename Takes to help find them more easily later on the BBR or in post
production on a Digital Audio Workstation (DAW). The keyboard connector on the
BBR is a PS2 style Mini DIN connector. It is also possible to name Takes and tracks
using the menu buttons and data wheel (see page 32) but you’ll find it much quicker
using the JoeCoRemote or a standard PS2 keyboard
To rename a take: on the JoeCoRemote use the Name Manager MENU; on a PS2
keyboard, use “Ctrl-S” and then type in the name that you want. The BBR will accept
capital and lower case letters, spaces and all normal characters that computers will
accept in file names except the dash “-“ (any illegal characters will be replaced with
an underscore “_”). You can navigate backwards and forwards using the left and right
arrow keys. The delete and backspace keys operate as you would expect. Finish by
pressing “Enter” on the keyboard. (Escape will cancel any changes). The resulting
tracks will be called

nnn-tt.Take Name.WAV
where “Take Name” is the new name that you typed. This will rename all the tracks
[01 - 24] of this take in this folder with this new Take Name. [Note: It is important for
the BlackBox to keep the nnn-tt prefix so that it knows which audio files belong
together as a Take and which track is to be played out of which output. It also helps
some DAWs to place the tracks in their playlist in the correct order / position for
playback.]
So for example, if the current take is 001(unnamed) and you decide to name it
“Scene1”, you will end up with the following files on your disk
001-01.Scene1.WAV
001-02.Scene1.WAV
001-03.Scene1.WAV
...
001-24.Scene1.WAV
Renaming tracks
To rename a track: use “Ctrl+<digit><digit>T” on the keyboard (where <digit><digit>
is a number between 01 and 24 to select which track you want to name) then type in
the name that you want. The BBR will accept the same characters as for Take Names,
above. Finish renaming the track by pressing “Enter” on the keyboard (or arrow
up/down if you want to immediately name another track). The resulting tracks will be
called
nnn-tt.Take Name-Track Name.WAV
where “Track Name” is the new name that you just typed. If you use the down arrow,
the BBR will automatically move on to the next track so that you can rename it too.
You may want to name all the tracks similarly for

every Take that you’re going to record. If Sandra’s
mic is plugged into channel 2 then it will probably
remain that way for the whole day’s shoot. To
facilitate this, the Track Arm or the Name
Manager MENU allows you to load the track
names from an existing Take and then use them as
a template. Select the Take which has appropriately named tracks as if for Playback
(see above).

Enter the Track Arm MENU or the Name Manager MENU and then select the Track
Name Template MENU. Select “Copy names from take” and this will populate all the
Track names for you automatically. All Takes that you record subsequently will use
these Track names. The Track names will be stored in the Flash memory so you can
use them time after time.
So for example, assuming that channel 1 is George’s mic and channel 2 is Sandra’s,
you would use “Ctrl-01T” and then type “George” before pressing “Down Arrow” and
then “Sandra”, etc. and you would end up with files named:
001-01.Scene1-George.WAV
001-02.Scene1-Sandra.WAV
001-03.Scene1-Jimmy.WAV
...
001-24.Scene1-Daphne.WAV
The next Take might contain files named as follows:
002-01.Scene2-George.WAV
002-02. Scene2 -Sandra.WAV
002-03. Scene2 -Jimmy.WAV
...
002-24. Scene2 -Daphne.WAV
But it would use the track names you have entered automatically.
It is completely optional whether you rename Takes or Tracks. The BBR does not
require you to do it; it merely helps in post production when the disk has hundreds of
WAV files in each folder. The basic naming scheme and time stamping will keep the
files well organised anyway.
Playback and Virtual Sound Checking

If you are using the BlackBox Recorder for Playback or Virtual Sound Checking you
may need the ability to Loop around certain sections of the audio, such as a chorus.
This is where the MARK and LOOP buttons are
primarily used.
MARK and LOOP operations

Pressing the MARK button either during the
Recording or during Playback will place
Markers in the Take File itself. Multiple
Markers can be set within a Take. The Markers

are indicated on the Transport Function Bar
Having set some Markers, the LOOP button will create a playback Loop and
continually play back the MARKED section of the Take.
If the LOOP button is pressed between Markers, the BlackBox will continue in
playback until it reaches the next Marker, Loop back to the previous Marker and then
recommence playback. There will be a short break in playback while the BlackBox
loops back to the earlier Marker (i.e. it does not create a continuous loop).
If, however, there are no later Markers, pressing the LOOP button will create a Loop
between the last Marker and the current playback position.
LOOP mode will remain active until you press LOOP again. You are able to STOP and
restart PLAY whilst remaining in LOOP mode.
In STOP, holding down MARK and using the data wheel will jump to the next and
subsequent Markers within the Take so that you can start playback from a specific
Marker.
In PLAYBACK, holding down the MARK button while using the data wheel enables the
deletion of Markers that are no longer required in the current Take. Clockwise
movement will delete one (or more) later Marker(s); Anticlockwise will delete one,
(or more) earlier Marker(s).
The Markers are stored in the audio files in what’s known as a Cue Chunk, which
many (but not all) DAWs can read. So they may also be used to indicate a place in the
recording to post production. Best to check with your post house whether they can
read this information.
Monitoring
The BBSG24MP has two TRS jack sockets. The rear socket is designated as the
producer or director’s output and will always
carry the monitor mix. The front socket is the
Engineer’s output and will either carry the
monitor mix or will monitor the PFL bus. This
allows the engineer to listen to specific mic
channels without disturbing the mix that the
producer is listening to. The mix can be quickly
adjusted on the monitor page of the

JoeCoRemote or can be adjusted more laboriously in the Monitor MENU on the
BlackBox itself.
The data wheel will alter the volume of the headphone output (when not in the
MENU). The volume is displayed on the colour display while you adjust it.
If you hold down the BACK button whilst using the data wheel, you will change what
is heard in the engineer’s headphones. The options are “MIX”; “ALL”; “1-2”; “3-4”,
etc. with ALL being the summing mix mentioned above and the individual track pairs
being a pre-fade listen of each pair of tracks (panned hard left and right). The
Monitor... section of the menu controls the level and pan settings in the MIX mode.
The Monitor Menu allows you to set the BACK button to toggle the data wheel
function between selecting the PFL / solo channel and controlling the headphone
volume. In this mode, the MARK button will cancel PFL and return to the MIX setting
allowing you to quickly switch back to the monitor mix when you need to. The MARK
and BACK buttons flash while the data wheel is used to indicate this mode.
The Monitor Menu also allows you to elect to solo individual channels in mono,
rather than pairs in stereo. It is also where you set the peak hold time. You can select
the Hi-res metering mode where the Track Arm LEDs on the meter display will show
the level on the channel(s) that are being soloed.
Summary of Combined Front Panel Controls

Transport Mode Press/Hold Wheel Function
Any - < or > Headphone monitor volume
Any BACK < or > Headphone monitor solo channel
Any (PFL toggle BACK - Swap between volume and solo channel
mode) select
Any (PFL toggle MARK - Exit solo and return to mix setting
mode)
In STOP STOP < or > Fast rewind or Fast forward wind
In STOP MARK < or > Select MARKER for PLAY position
In STOP MARK - Select Previous Take
IN STOP LOOP - Select Next Take
In PLAY MARK < DELETE previous MARKER(s)
In PLAY MARK > DELETE subsequent MARKER(s)
In PLAY LOOP - Enter LOOP mode at next MARKER or
immediately if no subsequent MARKERS
In PLAY/RECORD MARK - Set a MARKER at current time
In RECORD REC - Mark the start of a new TAKE

Using the Menu
The following section discusses the menu in more detail. Throughout the menu
operations the MENU button moves forward through the structure and also acts as a
CONFIRM button; the BACK button moves backwards through the menu structure
and can act as an ESCAPE button. The data wheel acts as a selector and data entry
wheel whilst in the menu structure. The MARK and LOOP buttons also replicate the
wheel to advance down or retreat up the menus, selecting the next or previous menu
item.
Once you have adjusted and confirmed the setting or parameter that you want to
change, use the BACK button to exit the menu and get back to the normal main
screen display. On the whole it’s pretty obvious so try it.
Menu items are of 4 types

 Submenu: These are shown by an ellipsis after the name, e.g.
"Date/Time...". When you press MENU the BBR loads the submenu.
 Multiple choice: These show a colon after the option title,
e.g. "Line-in mon: E-E(via DSP)". When you press MENU the option turns
red and you can scroll through the available options and press MENU again
when you have made your choice.
 Tick box: These are preceded by a tick
() if selected or an empty tick box if
not selected. e.g. “Display Take TC”
Press MENU to toggle the option.
 Action: These are preceded by a
hatchet or tomahawk symbol. When
you press MENU the BBR executes the
option indicated, e.g.
"/ Reset". Where appropriate the BBR will show a "buried hatchet" symbol
in red after execution.
Menu structure and operation

To enter the menu, press the MENU button in the Control section of the front panel.
The menu structure is echoed on the JoeCoRemote interface and is accessed using
the MENU button. Some items are not available on the JoeCoRemote.

Setting up adjustable parameters
This list may not be exhaustive as JoeCo is constantly improving its products and may
have added features to the software since this document was authored. However,
this will give you a good idea of the basics and you can always get the most up to
date information from the website.
The currently selected Menu item is highlighted in Yellow.
When a Menu item to be adjusted is selected,

the display changes to yellow text on a red
background. You can then use the control wheel
to change the setting before confirming with the
MENU button or rejecting your changes with the
BACK button. Some real-time functions cannot
be rejected with the BACK button.
Unavailable items are “greyed out” in light red text.
Playback Lockout
Playback Lockout has two settings, on & off, indicated by a tick () beside the option
in the MENU and the LED in the Meter area. In the setup menu you can decide to
control Playback Lockout manually or set it to be asserted automatically whenever
you enter record as a safety measure.
Track Arm...
Arm All: Arms (enables recording on) all tracks.
Disarm All: Disarms (disables recording on) all tracks.
Arm ticked: Arms the tracks (listed below) that have a tick “” (sometimes called a
“check mark”) beside them.
1...24: the tracks which can be ticked or unticked using the MENU button and then
Armed using the Arm Ticked menu item above. Track names (if used) are displayed
here also. (See Renaming Tracks on page 20)
Clear all track names: this clears all the displayed track names – subsequent
recordings will not use track names (unless you rename them)
Copy names from take: this loads the track names from the current take into the
track display. Subsequent recordings will use these track names.
Edit take updates template: when ticked the template will be updated when you edit
a track name.

Take Select...
This loads the Take Select Menu allowing you to select Takes for playback. The
options are:
Recent Takes...
Provides a list of the most recently played Takes – useful if you’re on tour and want
to use the same takes in each venue for sound checking
Select Take Folder...

Allows you to navigate to a particular folder. This automatically loads...
Select Take...
Allows you to choose a Take from within the selected Folder.
MicPre
The Mic Pre Overview gives you a quick view of the settings for all the Mic Pre input
channels though it is recommended to use the
JoeCoRemote app on an iPad for general use.
Each channel shows mic/line; Gain in dB and the

status of the High Pass Filter (f), Phase Reverse
(p) and Limiter functions (L). Green text
indicates a dynamic mic and red indicates that
Phantom power is enabled on that channel.
Select the channel using the wheel and use menu to adjust its parameters.
Input/Output...
This option allows the setup and configuration of the digital option cards. When a
card is installed, you need to select it in the menu. (If you have changed the card you
will need to power the system off and then back on again after selecting the card
type.) Once installed, the digital outputs will usually reflect the individual outputs –
i.e. channel 1 input will be output on both the digital and analogue channel 1).
It is possible to use the BBSG24MP as a standalone MADI or Dante recorder to

capture 24 channels of digital input. Selecting this option disables the Mic Pre Inputs
completely.
The input status bar displays whether there are errors or clock slippage. The input
status display is echoed at the top of the main screen if an error or any digital

slippage occurs. Any clock errors are noted in the error display area of the main
screen. The Clock Error Display can be cleared using the STOP button. The
information area of the main screen will indicate when the Reference clock is missing
or when a digital signal slip occurs. Reference clock (see below) can also be set in this
menu screen. It is recommended to use the digital input as a reference clock if
recording from it.
The Digital Output setup determines whether to send the monitor mix and/or the
engineer’s mix to spare channels in the output stream.
Setup...
This section contains the most frequently adjusted parameters.
Reference Clock
When set to SoundGrid Mode, the BlackBox BBSG24MP will take its Reference clock
settings directly from the Soundgrid interface and is controllable from within the LV1
or SoundGrid Studio application.
When in Standalone mode, the Reference Clock

determines where the digital sample clock is
derived from. The options include the internal
reference oscillators, the AES-spdif external
clock from the RCA (Phono) socket on the rear
panel, or (where a digital board is fitted) the
input signals from the digital board (such as
MADI or DANTE). The BBSG24MP can also be
locked to an external Word Clock or can generate its audio clocks from incoming
Video or Timecode. Once the unit has connected to SoundGrid, Standalone mode is
not available until the power has been cycled.
It is very important that you understand why digital clocking is important, if you don’t
know already. Please spend some time talking to people further down the post
production process to find out what they would like or recommend, or consult our
FAQs on the JoeCo website.
BNC Sync Setup

This controls the function of the BNC sync
socket on the rear panel of the BBSG24MP. It

allows for the unit to be synced to a Video reference or to receive or generate
WordClock.
Timestamp
Broadcast WAV files include a timecode stamp which marks the time of the first
sample of the file and helps re-sync the files in the post production process. This can
be derived from a source of Linear Timecode (LTC) or MIDI timecode (MTC) or from
the real-time clock built into the BBR.
The BBR can only read timecode (i.e. act as a timecode Slave) it does not generate
timecode (i.e. act as a timecode Master). The standard BlackBox does not chase
timecode or lock to it. If you require synchronous playback you will need the
BlackBox Player option which allows playback to be triggered in sync with incoming
timecode.
Sample rates
Select between 44.1, 48, 88.2 and 96kHz or set in
the SoundGrid controlling system.
Wordsize:
24bit or 16bit. We recommend that you always
choose 24bit unless you’re really short on disk
space or your post production requires 16bit.
Control...
The BlackBox Recorder can accept commands from an external control device such as
a console or hardware controller.
Remote Mode:
The BBR1 can respond to open loop MIDI Machine Control (MIDI MMC) protocol
commands for transport controls and track arming/disarming. Note though that the
BBR1 has no MIDI return path (open loop) and so cannot acknowledge the receipt of
a MIDI command or display the take time on the controller. The BBR can also
respond to Sony 9-pin Machine Control (also known as SONY PII) protocol commands
for transport controls and track arming/disarming. The JoeCoRemote iPad app is also
selected here connected either via WiFi control or as a wired pad.
Local Control allows you to disarm the front panel when remotely controlling the BBR

Footswitch: The ring of the LTC/F.sw TRS jack socket can accept a momentary switch
which will emulate pressing the record button (starting a new recording or marking a
new take); setting a MARK; toggling REC / STOP or toggling PLAY / STOP. If you need
to use this facility with LTC timecode you’ll need to make up a special cable but if
you’re just using a standard footswitch push the jack in half way or get an adapter
cable from your supplier
Link Mode and Link Preroll

Used for linking multiple BlackBox Recorders together: see section later in this
manual on page 35.
TC Format allows you to set the timecode frame

rate. The BlackBox will flash the timecode
display (bottom right of main screen) if the
incoming timecode is at a different rate to that
which you have chosen. Always set the
timecode frame rate
TC Trim allows for very fine adjustment in

“timecode bits” of the offset between the
incoming timecode and the internal time. Usually only relevant in post production
TC Rejam after record “jam-syncs” the timecode reader a second or so after a

recording starts and then calculates and timestamps the files accordingly. This is
useful when you do not have a continuous source of timecode or timecode starts at
the same time as you want to start the recording.
TC rejam after split “jam-syncs” the reader after every time you split a recording with
the REC button.
TC start starts record automatically starts a recording when the BlackBox sees
incoming timecode.
TC restart splits record will start a new take when there is a discontinuity in the
received timecode.
TC stop stops record will end a recording when there is a break in the timecode.
MIDI Setup is used to set up the MIDI control input. More details are available in the
visitor area of the JoeCo website
WiFi setup is used to configure the WiFi operation with the JoeCoRemote. Again,
more details are available on the JoeCo website

Line-In Mon:
This adjusts how the unit monitors the Line-In signals on all 24 channels. The default
position will be E-E (via DSP). Line-In Mon can also be set to Off so that the input
signal is not echoed to the output at all.
i/o level (0VU):

The two settings are LOW and PRO as described earlier in this document (Page 9).
Power Control
This MENU allows various parts of the system to
be powered down to conserve battery life when
the unit is under battery power. The options
available are as shown here:
Input channels 1&2 are always enabled as are

output channels 23&24
Peak hold
This determines how long a peak level will be displayed on the Meters. During the
setup and sound checking it is probably worth setting it to “forever” so that you can
easily tell if any of the mic amps are overloading and back them off accordingly.
During the recording itself, you can set them back to whatever you find most helpful.
Please note that if you are overloading the mic amps, you will be overloading the A-D
converters on the BlackBox. Digital distortion is not pleasant to listen to and will
probably render your recording useless. You may not notice it live but you will hear it
on the recording. Please leave yourself enough headroom when you’re recording. If
you’ve set the level correctly, the red meter LEDs should flash infrequently if at all
which will give you about 10dB of headroom.
Playback Lockout
You can set playback lockout to be automatically asserted after you’ve made a
recording, or to be controlled manually. See Playback Lockout section on page 25
Rec stop hold:

Normal requires you to hold the stop button down for a second or so to end a
recording; Extend (10s) requires you to hold the stop button down for 10 seconds to
end a recording.

Display Take TC on Play
This setting forces the main time display to show the timecode embedded in the file
during playback. The BBR will also display the incoming timecode on the main display
when in Record or Stop. It will show “--:--:--:--“ when no timecode is present
Adjusting the real-time clock

The real-time clock is used to create folders on the drive with a logical name so that
you can find your recording again later. It’s also used to timestamp your recordings
when no other reference (such as Linear Time Code) is available, so it’s a good idea to
make sure that the clock is set correctly.
Select Date/Time from the Setup menu. Select which field you want to adjust. Press
MENU to edit the field with the data wheel and then Menu again to confirm and the
BBR moves onto the next field automatically. Press BACK when finished.
TAKE or SONG
The BBSG24MP unit can be used in both Film and TV environments and concert and
other recordings. The Use the Term: TAKE or SONG option allows the user to switch
the nomenclature used in the user interface. It has no effect on the files created.
Reset
Resets the BlackBox back to its factory state – useful if you’ve forgotten what
parameters you’ve changed.
Monitor...
Solo in: mono or stereo.
Hi-res metering turns the row of Record Enable LEDs into a high resolution level
meter showing what signal level is on the PFL bus.
Monitor Mix and Monitor Pan allow the adjustment of level and pan for each
channel feeding the headphone Mix.
Route Mix to: This setting allows you to route the mix to a pair of channels if you
wish to record a monitor mix to give to someone immediately after the recording.
The default is to send the monitor mix to the headphone outputs only.
BACK: Toggles level/select controls the way that the PFL monitor operates. (See page
23)

Name Manage...
The Name Manager menu allows you to set up the optional naming conventions that
you want to use. Naming takes and tracks is not mandatory but it can help a lot
during the post production process. It is possible to name Takes and tracks using the
menu buttons and data wheel, but you’ll find it much quicker using a standard 102
key PS2 keyboard. The “^” character in the following list indicates a keyboard
“hotkey”. Holding the Ctrl key on a keyboard whilst pressing the following letter will
allow you to change that field. Most hotkeys can be used during a Recording.
Next (^p): will prename the next Take that you record
Reuse next takename will use the same take name for each subsequent recording
Folder (^f): Displays the current folder’s name and allows you to rename it. Note
though that the BlackBox will always record into a folder named with today’s date so
if you rename today’s folder before you’ve finished recording all subsequent
recordings will be made into a new folder.
Take (^s): This displays and allows you to name the current take.
Use track names on rec enables the template function so that each track name will
be taken from the template.
Track Name Template… loads the template menu.
Clear template removes all the template names.
Copy names from take copies any track names in the current take into the template.
Track 1...Track 24. These are the template names for each track.
Track Names in Take… this allows you to modify the track names for the current take
without affecting the template.
edit also updates template … When ticked, using ^t on a QWERTY keyboard will
update both the current take and the template.
Disk Manage...
This allows you to set up certain parameters regarding how you use the disk. It also
allows you to format a USB2 disk drive for use with the BlackBox Recorder and with
any Mac or PC based workstation.

Maximum File Size:
Certain popular Digital Audio Workstations are a little fussy about playing back very
long files. For this reason the BBR can automatically split very long recordings into
files whose maximum length is 1GByte, 2GByte or 4GByte. Check with the post
production facility that’s most likely to be using the files you record, to find out what
their equipment is capable of accepting. If you don’t know, the 2G file size is the best
compromise.
Disk Partitions / Volume:

Very large disks are sometimes “partitioned” into multiple drives or “volumes”. If you
were to plug a partitioned drive into Windows, for example, it would look as though
you had plugged in two or more drives at the same time and might appear within
Windows Explorer as drive E:, drive F: and drive G:. This part of the BBR interface
allows you to select which partition to use.
Format...
This option allows you to format a USB2 drive, ready for use with the BlackBox
Recorder, which will also be compatible with any Mac or PC based Digital Audio
Workstation. When you enter this part of the menu, you will first have to Select the
partition that you want to format: The BBR defaults to partition “none” as a safety
measure to prevent accidental formatting of a drive.
Having selected the partition, the BBR displays the current status of that partition.
You can then move onto Format Partition to actually format the drive. Again, there
are warning messages to try and prevent accidents.
The final option in this menu allows you to partition the drive into one or more
usable partitions. This subject is covered in much greater detail in the FAQ section of
the JoeCo website www.joeco.co.uk/main/faqs
Write Protect Disk. This setting will prevent the BBR from writing anything to the
disk. However, it will NOT prevent any other operating system from writing to the
disk.
Software updates
It should be noted that JoeCo may release software upgrades from time to time,
either to add features or to cure bugs that have been found in the software – though
we have endeavoured to remove all that we’ve found.

Therefore, this document may be superseded in the future as other items are added
to the menu structure. We will note any significant changes in the on-line version of
the User Manual which will be found in the download area of JoeCo website
www.joeco.co.uk and Log In
The software version currently installed into the BBR is displayed on the LCD display
during the boot procedure and can also be seen in the “About” Menu. (N.B. In the
event of reporting any suspected problems you will need to give the whole system
nd
serial number and the entire 2 line of the About Menu as this contains both
software and hardware version information.)
To load a new software update into the BBR:
Note your current version and ensure that you have a copy in case the update
process fails for any reason. It is never a good idea to upload a new piece of software
immediately before an important recording – please give yourself enough time to
fully test that the software works to your satisfaction before you need to use it in
anger.
Ensure that you have a stable source of power during the update process – we have
endeavoured to make the update process safe if the power fails during an update,
but there is always the possibility that something could go wrong, requiring a return
to the factory for a chargeable repair.
Download the new update file from the JoeCo website directly into the root folder of
a USB2 hard drive or a FAT32 formatted memory stick (note small memory sticks or
Pen drives are often formatted with FAT16 which will not work).
In the Update menu, set the BBR to “Permit: updates only” and then plug the drive
(or memory stick) into the USB2 socket.
The BBR will notice the presence of the update file and ask you whether you want to
upload it. Select “Yes” by pressing the MENU button or “No” by pressing the BACK
button.
Having uploaded the new file the BBR will automatically reboot into the new
software version. Connect your main disk drive and you’re ready to use the new
software.
The BBR can be set back to “No updates” in the update menu after you’ve loaded the
new software to avoid checking for updates on future boot ups.

The other Permit setting in the update menu allows you reload an old version of the
software just in case you need to downgrade back to a previous version whose
features you’re already familiar with.
It is also possible to upgrade the firmware on the MicPre Input card. More details of
this firmware upgrade option will be provided if required.
Manage Updates
This option should only be used with great caution and is not for the feint hearted. It
allows you to completely remove a field update that you have already installed,
reverting to the original factory version, or to replace the original factory version with
a field update. The only reason for replacing the original factory version with a field
update is to speed up the boot time – typically a field update will add about 10
seconds to the boot time of a BBR which still makes it about 10 times faster to boot
than a normal computer.
IF ANYTHING GOES WRONG OR THE POWER FAILS DURING THIS PROCESS YOUR
BBR WILL HAVE TO BE RETURNED TO THE FACTORY TO BE RECONFIGURED AT YOUR
COST – REPAIRING UNITS THAT HAVE FAILED DURING THIS PROCESS IS
SPECIFICALLY EXCLUDED FROM ANY WARRANTY.
Licence...
This allows you to license certain chargeable options, more details of which are
available on the JoeCo website. You will need to advise JoeCo of the machine key
along with your payment details before JoeCo can enable any optional software. You
will then receive a non-transferable enabling code for your BlackBox which can be
entered into the unit using the Enter key: dialog
After the code is entered you will receive a message on screen affirming that the
code was correct and the relevant menu items will appear.
Linking multiple BlackBox Recorders together

It is possible to link multiple BlackBox Recorders together to make recordings with
more than 24 channels or to make redundant copies by duplication. Typically up to
four units can be linked in this way to create a maximum 96 channel / 96 kHz
recording. Each BlackBox Recorder will still require its own USB2 disk drive as only 24
channels of data will be recorded to each drive. This will also provide benefits in post
production as many popular DAWs will only play back a limited number of tracks
from each external drive.

As stated earlier in this manual, ensuring that the units are synchronised, with both
the clocking and starting sample of each recording being locked together, is vital for
being able to replay the material later in a DAW environment.
The BBR1 achieves this link using the “Ext Clk” RCA sockets on the rear panel. The
Master unit will output a sample clock signal to the other units embedding the
control data and timecode into the sub-code of the SPDIF data stream. This clock
signal is intentionally silent with no audio data present to ensure that there is a clean
feed of clock signals between the units. The Slave units can either be daisy chained
together from the Master unit, or (preferably) be fed their clocking and control
signals from a distribution amplifier. You will need short RCA (phono) jumper cables
to connect each subsequent unit.
Using an AES/EBU Distribution Amplifier (recommended)

Master Ext Clk Out feeds Distribution Amplifier input
Distribution Amplifier feeds Ext Clk In on all slave units
Daisy Chaining Units

Master Ext Clk Out feeds Slave1 Ext Clk In
Slave1 Ext Clk Out feeds Slave2 Ext Clk In
Slave2 Ext Clk Out feeds Slave3 Ext Clk In
Slave3 Ext Clk Out not used.
In the SETUP | CONTROL menu, select Link Mode. Select Master for the recorder you
want to act as the master controller (which will always record channels 1-24). The
Slave units can be set to Slave 1-24 (creating duplicate tracks to those on the master
recorder – though you will obviously have to feed this unit the same audio signals as
the master recorder or you’ll be recording silence!), Slave 25-48, Slave 49-72, and
Slave 73-96. The Slave machines will use the respective numbers (1-24, 25-48, etc.)
to name the tracks that they record and will also use any remote Track Arming data
from a 9-pin or MIDI controller. If you name a take on the Master unit, the Slave units
will rename the tracks on their local disk drives. The slave units automatically take
their clocking and control signals from the link connection and will lock out the
transport controls on all but the master unit.
It is still possible to lock the Master unit to an external clock source, if required, by
plugging an external AES Clock into the Ext Clk In of the Master unit or, on digital
units, clocking all the systems to external word clock. However, do not wire the clock

output from Slave 3 back into the Master unit as this will create a feedback loop
which may cause the clocking to become unstable. (The link signal between Master
and Slave units is proprietary and does not conform to the SPDIF protocol)
You then operate the Transport Controls of all the linked BBRs from the Master unit.
Please note though that the headphone monitoring for each unit will still appear only
on the unit that is recording those signals, so you will have to either use multiple
headphones or swap them from one unit to the next if you need to monitor the
higher numbered channels on the Slave systems.
Master/Slave Recording
Any slave units will go into record as soon as their respective disk is ready, so they
may not start together and their time displays may not appear to be perfectly in sync.
However, all the files recorded will have an accurate time-stamp and so will be in
sync when imported and “spotted” to timecode into a DAW. Pressing the REC button
again will start a new take across all units simultaneously.
Master/Slave Playback
In order to play back synchronously, each machine must have its preroll set to ensure
that the disk files can all be ready when they start. The default time will normally be
ok but this can be adjusted in the Control section of the Menu (see page 29). The
tracks from each unit may not necessarily start simultaneously but they will be in
sync when their audio starts.
If you are using multiple BBR1s for Virtual Sound Checking you will want to set
Playback Lockout on the Slave units to Manual.
Using a PS2 keyboard

The BlackBox Recorder can accept a standard 102 key PS2 style keyboard. Most mini
keyboards are not currently supported, especially those that require some set up
drivers to be installed on the PC. The most consistently reliable keyboards we have
found are the Microsoft 500 style PS2 keyboards which can be obtained in most
countries for around US$10 (£6). Some USB keyboards will work with USB to PS2
converters but not all.
In the following section the ^ character is used to indicate holding the Ctrl key down
whilst pressing the key i.e. ^s = Ctrl-s

Keyboard transport controls
These are the numeric keypad keys (not the character keys)
Enter PLAY
Del/. STOP
Ins/0 STOP AND RETURN TO ZERO
* RECORD
+ MOVE TO NEXT CUE POINT
- MOVE TO PREVIOUS CUE POINT
Direct edit from keyboard (various keys combined with ctrl key)
When not editing we implement various control keys to enter text edit directly (without using
menus).
^S edit current take name

^nnT edit track name for track “nn”
^P prename the next take before recording it
^F rename current folder
Keyboard controls during text edit
^C cut
^A select all
^V paste
L arrow / Right move cursor left or right along line of text
arrow 
Up arrow  / in single line edits where there is a natural previous/next number( e.g.
down arrow  track, ixml note), accept current item edit and move to previous/next
Return / Enter  complete and accept edit
Esc abandon edit, no change to text
NB. the return / Enter  key is the character key not the keypad enter; the cursor
arrow keys are the dedicated cursor keys, not the keypad keys
Keyboard navigation
These are the cursor keys (not keypad)
Right arrow  or Enter  same effect as pressing MENU
Left arrow  or Esc same effect as pressing BACK
If menu is open but no field selected
Down arrow move to next item in list (like clockwise wheel turn)
Up arrow move to previous item in list (like anticlockwise wheel turn)
If menu is open and field is selected
Down arrow increment option (like clockwise wheel turn)
Up arrow decrement option (like anticlockwise wheel turn)

Troubleshooting
We are confident that the BlackBox Recorder will give you long and reliable
performance but in case you have difficulties, here are a few things to try before you
call your dealer or distributor.
Problem Things to try
No lights on BBR unit  Check that the power supply is getting mains power
and that the correct power supply is plugged
correctly into the BBR1
 If you have access to a volt meter, check that the
power supply is producing at least 9V.
No display on LCD screen  Check power supply as above
 Reboot (turn power off, wait 10 seconds and turn
power back on again)
BBR not responding to  Check if disk activity light is operating continuously
controls for more than a few seconds. This may indicate a
disk problem. Try power cycling BBR and Disk drive.
Check disk for errors as soon as possible on a PC or
Mac
BBR boots ok but does not  Check that the USB connector is plugged in
log / find disk correctly to both the BBR and the disk drive
 Check disk drive power supply as above
 Try a different USB2 lead / disk
 Try powering up the BBR without a drive attached
and then plugging the drive in afterwards
 Check that the disk drive is formatted with a FAT32
filing system and the BBR1 is not displaying WRONG
DISK FORMAT
BBR will not enter RECORD  Is the disk full? Check the time remaining display
BBR will not enter PLAY  Check if the BBR is set to PLAYBACK LOCKOUT?
 Do you have a take selected?
 Maybe there is nothing recorded as yet on this disk
or in the current folder?
BBR sounds ok but no  Check that channels are record enabled
movement on meters  Check that levels from console are reasonably high
(> -40dBu)
 Check that BBR is turned on – the Relays normally
route the input directly to the output if the power is
off to give you protection against power failures

Problem Things to try
Some channels not audible  Check the cable looms feeding into the BBR1
 Check TRS jacks in console insert points
 Check loop through TRS jacks on BBR
Sound through BBR  Check the TRS jacks are plugged into the insert
distorted points on console correctly and that the D-types are
secured into the BBR
 Check that no-one has damaged the cable looms
 Try swapping cable looms to see if distortion
follows the cable, stays with the mixer channel or
stays with the channel of the BBR
BBR sounds ok during  Try turning off the Relays in the setup section and
record but is distorted in see if the recorded sound is now distorted
playback  Try another recording from a previous concert and
see if this is also distorted
Cannot locate previous  Are you using a different disk drive from last night?
night’s recording  Are you looking in the right folder?
 Can you check the drive in a normal laptop to locate
the previous night’s folder?
Power removed before BBR  It is often possible to recover files even when the
has finished writing to disk BBR has been powered down whilst still writing to
its disk. (See Safe’n’Sound Recovery page 40)
If the above list does not solve the problem you are having, please contact your
dealer in the first instance and then your local distributor to help you resolve the
issues.
Safe’n’Sound Record Recovery

The BlackBox Recorder software includes the Safe’n’Sound Record Recovery feature.
This software feature endeavours to protect your recording against every eventuality
such that even if the drive is unplugged, or the power is removed from the drive or
the BlackBox during a recording, Safe’n’Sound will try and recover the files as soon as
the drive is plugged back into a BlackBox Recorder.
Whenever a disk drive is plugged into the BlackBox Recorder, the disk’s filing
structure is checked and if any audio files are found to not have been closed
properly, Safe’n’Sound tries to repair them automatically, leaving all the files
accessible by normal workstations.
A note on Spotlight: It is worth noting that some indexing programs on standard

computers, particularly Spotlight on Mac OS, rewrite the File Allocation Table to
make the disk easier for a Mac to index. If you think that there might be a problem

with the disk, give the BlackBox a chance to repair the files BEFORE Spotlight
destroys them. Alternatively, disable Spotlight completely on the Mac before
plugging the drive in.
Whilst Safe’n’Sound cannot protect against a physical hard drive failure (which are
very rare nowadays), it helps protect against human error or power failure.
As a background task the BBR scans the disk to calculate the remaining disk space
and to find where the first free space is located on the disk. When it has found this
information and correctly updated the drive, it places a tick or check mark () beside
the remaining disk time.
Summary Of Alert Messages

"Hold STOP button to stop"; displayed when STOP is pressed
"PLAYBACK LOCKED OUT"; can be displayed if PLAY is pressed and PLAYBACK
LOCKOUT is on
"CONNECT VALID DISK"; displayed if PLAY or RECORD is pressed but disk is not
connected
"DISK BUSY"; displayed if PLAY or RECORD is pressed but disk is busy
(reserved, e.g. for take selection)
"DISK TOO SLOW"; displayed if requests to the DISK have not been serviced in
time.
"NEW TAKE" displayed if the user presses RECORD during record to start
a new take
"NO TAKE SELECTED"; displayed if someone presses PLAY but no take is selected
"SELECT VALID DISK"; displayed if PLAY or RECORD is pressed but the disk is not
valid
"DISK FULL"; displayed if PLAY or RECORD is pressed but the disk is full
"CHECK/SELECT DISK"; displayed if PLAY or RECORD is pressed but the disk returns
an error
"GENERAL ERROR"; displayed if there is an internal error, e.g. out of memory
"BAD TAKE FILE"; displayed if PLAY or RECORD is pressed on a corrupted take
file
"CAN'T FIND TAKE"; displayed if PLAY or RECORD is pressed when the selected
take is not available
"CAN'T FIND FOLDER"; displayed if PLAY or RECORD is pressed when the selected
folder is not available
"LOOP TOO SHORT"; displayed if LOOP is pressed and the loop length is too
short
"CHECK MASTER SIGNAL"; displayed if Slave is not receiving clock and control from
Master

"REMOTE CONTROLLED"; displayed when in remote control or slave mode, and a
disabled operation is attempted
"PLAY OUT OF RANGE"; when in remote control or slave mode, PLAYBACK is
attempted outside the timecode limits of the selected Take
“DIGITAL INPUT MISSING” A source of digital audio is not correctly plugged in
“DIGITAL SLIP” A source of digital audio is not properly synchronised with
the BlackBox and is slipping with respect to the chosen
clock source
“REF CLOCK MISSING” The external reference clock is not providing a valid clock
signal

JoeCo Conditions of Use
IMPORTANT: BY USING THIS PRODUCT YOU ACKNOWLEDGE THAT YOU HAVE READ,
UNDERSTOOD AND AGREE TO BE BOUND BY THESE CONDITIONS OF USE AND THE
TERMS OF THE JOECO SOFTWARE LICENCE AGREEMENT. JOECO’S SOFTWARE
LICENCE AGREEMENT IS SET OUT IN THE USER MANUAL AND MAY ALSO BE FOUND
ON THE JOECO WEBSITE AT WWW.JOECO.CO.UK
PLEASE READ THESE CONDITIONS OF USE (THE "CONDITIONS") CAREFULLY BEFORE USING YOUR JOECO PRODUCT. BY USING
YOUR JOECO PRODUCT YOU ARE AGREEING TO BE BOUND BY THESE CONDITIONS. IF YOU DO NOT AGREE WITH THESE
CONDITIONS, DO NOT USE THIS PRODUCT.
IF YOU DO NOT AGREE WITH THESE CONDITIONS, YOU MAY RETURN THIS PRODUCT WITHIN SEVEN DAYS OF THE DATE YOU
RECEIVED IT TO THE AUTHORISED DISTRIBUTOR OR RESELLER WHERE YOU PURCHASED IT FOR A REFUND, SUBJECT TO
JOECO’S PRODUCT RETURNS POLICY. JOECO’S PRODUCT RETURNS POLICY IS SET OUT IN THE PRODUCT USER MANUAL AND
MAY ALSO BE FOUND ON THE JOECO WEBSITE AT www.joeco.co.uk
Definitions
JoeCo: JoeCo Limited
Product: any product designed, manufactured, distributed or resold by JoeCo including the BlackBox Recorder
(which may be abbreviated to “BBR”). The term “product” includes both the hardware and its associated
software, as defined below.
Legitimate User: a legitimate user (hereinafter referred to as a “User”) is a person, or corporate entity or employee of a
corporate entity who is:
- the owner of a Product (following its original purchase from JoeCo, or an authorised JoeCo distributor or
reseller, or its subsequent purchase from a legitimate owner) and has accepted the terms of this
agreement
- using a Product on loan from its owner, where the owner has given their express permission and ensured
that the user does so only on condition that they first accept the terms of this agreement
- using a Product under a rental agreement with its owner, where the owner has ensured that the user does
so only on condition that they first accept the terms of this agreement
- using a Product under a temporary evaluation arrangement with its owner (which may be JoeCo or one of
its authorised distributors or resellers), for a period determined by the owner, where the owner has
ensured that the user does so only on condition that they first accept the terms of this agreement
Hardware: the tangible elements of the Product
Software: the operating software of the Product (whether in read only memory, on any other media or in any other
form) supplied by JoeCo whether installed at the factory or subsequently upgraded by yourself, an
authorised JoeCo distributor or reseller, or any other individual or organisation. It includes remote
control software, documentation, data and any other software, including software updates, supplied by
JoeCo.
Risk and Limitations of Product Use

You, the User, expressly acknowledge and agree that:
- To the maximum extent permitted by applicable law, use of the JoeCo Software is at your sole risk and that
the entire risk as to satisfactory quality, performance and accuracy is with you.

- You have evaluated the Product and accepted the suitability for your application.
- JoeCo Products are not designed, intended or suitable for use in any life-critical applications or situations
or environments where the failure or time delays of, or errors or inaccuracies in, the content, data
or information provided by the JoeCo Product could lead to death, personal injury, or seve re
physical or environmental damage. Any such use is entirely at the risk of the User and JoeCo and its
authorised distributors and resellers have no responsibility or liability whatsoever for any claim arising
from such use.
- JoeCo recorder Products are designed to enable you to record and reproduce material to which you own
the copyright, or material which the copyright owner has granted you permission to record and/or
reproduce.
- It is illegal to record, reproduce, distribute, sell, hire, lend, perform or broadcast all or part of a work
(written or musical composition, broadcast, performance or similar) whose copyright is held by a third
party without permission of that third party.
- JoeCo Products must not be used for purposes that could infringe a copyright held by a third party or
could, in any other way, be illegal. Any such use is entirely at the risk of the User and JoeCo and its
authorised distributors and resellers have no responsibility or liability whatsoever for any claim arising
from such use.
2. Limitations of Liability
Except for JoeCo’s limited Hardware Warranty (see Warranty Information in the relevant JoeCo User Manual or via the
JoeCo website at www.joeco.co.uk), to the maximum extent permitted by applicable law, JoeCo hereby disclaims all
warranties and conditions with respect to the Product and any services performed by use of the Product, either express,
implied or statutory, including, but not limited to, the implied warranties and/or conditions of merchantability,
satisfactory quality, fitness for a particular purpose, accuracy, non-infringement of third party rights or other implied
warranties or conditions.
No oral or written information or advice given by JoeCo or by an authorised JoeCo distributor, reseller or representative
shall create a warranty of any kind.
In no event will JoeCo be liable for incidental, consequential, special, indirect or other damages or claims, even if its
agents have been advised of the possibility of such damages, resulting from the breach of any express or implied
warranty. Such damages may include but are not limited to the following:
- any loss of profit or any other commercial damage

- partial or total loss of data incurred whilst using the Product
- the cost of recovery of lost data
- inability to use or to continue to use the Product itself or any connected device
- damage to property
- damage based on inconvenience, loss of time or interrupted operation
and, to the extent permitted by law, damages for personal injury.
In no event will JoeCo's liability for any damages to the User, purchaser or any other person exceed the price paid for
the Product, regardless of any form of the claim.
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so some of the
above limitations or exclusions may not apply to you.

Software Licence Agreement
JOECO LIMITED
SOFTWARE LICENCE AGREEMENT
USER LICENCE
IMPORTANT: BY USING THIS PRODUCT YOU ACKNOWLEDGE THAT YOU HAVE
READ, UNDERSTOOD AND AGREE TO BE BOUND BY THE TERMS OF THIS SOFTWARE
LICENCE AGREEMENT AND THE JOECO CONDITIONS OF USE. JOECO’S CONDITIONS
OF USE ARE SET OUT IN THE USER MANUAL AND MAY ALSO BE FOUND ON THE
JOECO WEBSITE AT www.joeco.co.uk
PLEASE READ THIS SOFTWARE LICENCE AGREEMENT (THE "LICENCE") CAREFULLY BEFORE USING YOUR JOECO PRODUCT OR
DOWNLOADING ANY SOFTWARE UPDATES. BY USING YOUR JOECO PRODUCT OR DOWNLOADING ANY SOFTWARE UPDATES,
YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENCE. IF YOU DO NOT AGREE WITH THE TERMS OF THIS LICENCE,
DO NOT USE THIS PRODUCT OR DOWNLOAD OR INSTALL ANY SOFTWARE UPDATES.
IF YOU DO NOT AGREE WITH THE TERMS OF THE LICENCE, YOU MAY RETURN THIS PRODUCT WITHIN SEVEN DAYS OF THE
DATE YOU RECEIVED IT TO THE AUTHORISED DISTRIBUTOR OR RESELLER WHERE YOU PURCHASED IT FOR A REFUND, SUBJECT
TO JOECO’S PRODUCT RETURNS POLICY. JOECO’S PRODUCT RETURNS POLICY IS SET OUT IN THE PRODUCT USER MANUAL
AND MAY ALSO BE FOUND ON THE JOECO WEBSITE AT www.joeco.co.uk
IN ADDITION, BY DOWNLOADING, COPYING, INSTALLING OR OTHERWISE USING SOFTWARE UPDATES FROM JOECO YOU
AGREE TO BE BOUND BY ANY ADDITIONAL LICENCE TERMS THAT ACCOMPANY ANY SUCH UPDATES. IF YOU DO NOT AGREE TO
THE ADDITIONAL LICENCE TERMS THAT ACCOMPANY SUCH UPDATES, YOU MAY NOT DOWNLOAD, COPY, INSTALL OR
OTHERWISE USE SUCH UPDATES.
Definitions Used In This Agreement

JoeCo: JoeCo Limited
Product: Any product designed, manufactured, distributed or resold by JoeCo including the BlackBox Recorder
(which may be abbreviated to “BBR”). The term “product” includes both the hardware and its associated
software, as defined below.
Legitimate User: A legitimate user (hereinafter referred to as a “User”) is a person, or corporate entity or employee of a
corporate entity who is:
- the owner of a Product (following its original purchase from JoeCo, or an authorised JoeCo distributor or
reseller, or its subsequent purchase from a legitimate owner) and has accepted the terms of this
agreement
- using a Product on loan from its owner, where the owner has given their express permission and ensured
that the user does so only on condition that they first accept the terms of this agreement
- using a Product under a rental agreement with its owner, where the owner has ensured that the user does
so only on condition that they first accept the terms of this agreement
- using a Product under a temporary evaluation arrangement with its owner (which may be JoeCo or one of
its authorised distributors or resellers), for a period determined by the owner, where the owner has
ensured that the user does so only on condition that they first accept the terms of this agreement
Hardware: The tangible elements of the Product

Software: The operating software of the Product (whether in read only memory, on any other media or in any
other form) supplied by JoeCo whether installed at the factory or subsequently upgraded by yourself, an
authorised JoeCo distributor or reseller, or any other individual or organisation. It includes remote
control software, documentation, data and any other software, including software updates, supplied by
JoeCo.
1. General
You agree that:
- The Software is licensed, not sold, to you by JoeCo for use only under the terms of this Licence on the
associated Product
- All ownership rights to the Software belong to JoeCo and/or to JoeCo’s co-developers or suppliers
- You will not copy (except as expressly authorised by this Licence or separately in writing by JoeCo) or
attempt to decompile, reverse engineer, disassemble, derive the source code, modify or create derived
works of any aspects of the Software or hardware provided by JoeCo. You accept that any attempt to do
so would be a violation of the rights of JoeCo, its co-developers and suppliers and constitute a breach of
this agreement.
- JoeCo, its co-developers and suppliers reserve all their rights not expressly granted to you.
- You will use the Software in compliance with all applicable laws, including local laws of the country or
region in which you live and/or use the Software and/or download updates to the Software
Parts of the Software and Product hardware are protected by international patents either granted or pending and other
intellectual property rights.
No licence is granted by this document for use beyond the licensed use of the Software. Violation is subject to damages
under applicable laws.
2. User Licence
You, the User, are entitled to use all parts of the Software for the duration of the life of the Product.
If the Product is sold on to a third party a new user is entitled to the same use, that is to use all parts of the Software
for the duration of the life of the Product, provided that they agree to all the terms of this Licence.
3. Additional Charge Items

From time to time JoeCo, or third parties authorised by JoeCo, may make available software which by reason of third
party licensing or specific extra cost of development or other reason, may be subject to additional charges for use. At
its sole discretion JoeCo may issue separate licence agreements regarding evaluation or use for such additional charge
items. If JoeCo does not issue a separate licence agreement with any additional charge item then the software
embodied in that additional charge item will fall under the provisions of this Software Licence Agreement.
4. Limitations of Use
The Software must not be used for any illegal purposes and especially not for any use involving breach of copyright. The
Software is not licensed for use in any life-critical application. You acknowledge that the JoeCo Software is not
intended or suitable for use in situations or environments where the failure or time delays of, or errors or inaccuracies
in, the content, data or information provided by the JoeCo software or services could lead to death, personal injury, or
severe physical or environmental damage. Any such use is entirely at the risk of the user and the user must hold JoeCo
harmless for any claim arising from such use.
You, the User, expressly acknowledge and agree that:
- to the maximum extent permitted by applicable law, use of the JoeCo Software is at your sole risk and that
the entire risk as to satisfactory quality, performance and accuracy is with you
- you have evaluated the Software together with the hardware and accepted its suitability for your

application
To the maximum extent permitted by applicable law, JoeCo hereby disclaims all warranties and conditions with respect
to the Software and any services performed by use of the Software, either express, implied or statutory, including, but
not limited to, the implied warranties and/or conditions of merchantability, satisfactory quality, fitness for a particular
purpose, accuracy, non-infringement of third party rights or other implied warranties or conditions.
No oral or written information or advice given by JoeCo or by an authorised JoeCo distributor, reseller or representative
shall create a warranty of any kind.
Should the Software prove defective or unsuitable for your application, you will assume the entire cost of all necessary
correction, servicing or repair.
Users of JoeCo products who upgrade to this Software from a previous version should note that JoeCo has no
requirement to supply free of charge upgrades but does so in the interest of adding additional functionality and
improvements for the benefit of its customers. In the event that a change of functionality is made that is not of benefit
to you, your sole recourse is to revert to a previous version of the Software as already properly used under licence and
accepted for use by you.
In no event will JoeCo be liable for incidental, consequential, special, indirect or other damages or claims, even if its
agents have been advised of the possibility of such damages, resulting from the breach of any express or implied
warranty. Such damages may include but are not limited to the following:

In no event will JoeCo's liability for any damages to the User, purchaser or any other person exceed the price paid for
the Product, regardless of any form of the claim.
6. Termination of Licence
This Licence is effective until terminated. Breach of any terms of this Licence by an owner or user of a Product will
automatically terminate the Licence. The Licence is also terminated if the Product is returned under warranty or in
exchange for a full or partial refund or in exchange or part-exchange for another product. Upon termination you will
cease all use of the Software and destroy or return any copies of the Software to JoeCo. Sections 1, 3, 4, 5, 6, 8, 9, 10
and 11 of this Licence shall survive any such termination.
7. Force Majeure
JoeCo will not be liable or responsible for any failure to perform, or delay in performance of, any of its obligations
under this Licence that are caused by an event outside of its reasonable control.
8. Waiver
If JoeCo fails, at any time during the term of this Licence, to insist upon strict performance of any of your obligations
under this Licence, or if it fails to exercise any of the rights or remedies to which it is entitled under this Licence, this
shall not constitute a waiver of such rights or remedies and shall not relieve you from compliance with such obligations.
A waiver by JoeCo of any default shall not constitute a waiver of any subsequent default.
No waiver by JoeCo of any of the terms of this Licence shall be effective unless it is expressly stated to be a waiver and
is communicated to you in writing.

9. Severability
If any provision of this Licence is found void, invalid or unenforceable, it will not affect the validity of the balance of the
Licence, which shall remain valid and enforceable according to its terms. In the event any remedy hereunder is
determined to have failed of its essential purpose, all limitations of liability and exclusion of damages set forth herein
shall remain in full force and effect.
10. Entire Agreement

This Licence constitutes the entire agreement between you, the User, and JoeCo relating to the Software and
supersedes all prior written agreements and verbal or written undertakings. JoeCo will not be bound by any
modification or amendment of this Licence unless it is in writing and signed by JoeCo.
You acknowledge that, in agreeing to the terms of this Licence, you have not relied on any representation, undertaking
or promise given or implied from anything said or written by JoeCo or by an authorised JoeCo distributor, reseller or
representative prior to entering into this Licence except as expressly stated in this Licence.
In the event that any translation of this Licence (from its original in UK-English language version) is carried out for
different countries and there is a dispute between the UK-English and any non UK-English version, the UK-English
version of this Licence shall take precedence, to the extent not prohibited by local law in your jurisdiction.
11. Governing Law

This Licence shall be construed, interpreted, and governed by the laws of England. This Licence shall not be governed
by the United Nations Convention on Contracts for the International Sale of Goods, the application of which is hereby
expressly excluded.

Warranty Information
1. Warranty
Except as specified below, JoeCo Limited (hereinafter referred to as JoeCo) warrants the hardware elements of this
JoeCo Product (hereinafter referred to as the ‘Hardware’) to be free of defects in materials and workmanship for a
period of one (1) year for parts and labour from date of original retail purchase, provided that:
- the Product is owned by the original purchaser
- the purchaser has proof of purchase from an authorised JoeCo distributor or reseller
- the purchaser has registered the Product with JoeCo
The following are not covered by the Warranty, damage:

- resulting from abnormal use, misuse, abuse, neglect or accident
- sustained as a result of failure to follow instructions provided in the user manual
- which occurs during shipping, in which case claims must be presented to the carrier
- resulting from attempted repair by anyone other than JoeCo or a JoeCo distributor, reseller or service
provider specifically authorised by JoeCo to service JoeCo’s Products
- to any Product which has been modified or on which the Product identification details have been altered or
removed.
This Warranty:
- gives you specific legal rights, and you may also have other rights in certain countries or states
- provides that, during the Warranty period, JoeCo will, at its sole option, either replace, repair or refund the
purchase price of any JoeCo Product that proves to be defective in materials or workmanship on inspection
by JoeCo or one of its authorised service providers
- excludes power supplies and cables
- includes labour and materials (except power supplies and cables) but excludes shipping to and from JoeCo
or one of its authorised service providers, minimal handling charges and insurance
- is only valid within the country in which the Product was originally purchased
- can only be exercised by the original retail purchaser and cannot be assigned or transferred
- starts from the date of delivery from the JoeCo distributor or reseller to the purchaser
- is extended to the minimum level required by law in those countries or states in which such extension is
required by legislation
- applies to a repaired or replacement Product until the end of the period of the original Warranty or thirty
days from the date of dispatch of the repaired or replaced Product, whichever is the longer.
2. Claims Under Warranty

To make a claim under Warranty, the purchaser must first call, email or write to JoeCo (see the JoeCo website at
www.joeco.co.uk for contact details) to provide a description of the problem and to obtain a Returned Materials
Authorisation (RMA) number. If it is determined that the Hardware may be defective, you will be given an RMA
number and instructions for returning the Product.
Any Product which is returned to JoeCo or to one of its distributors or resellers without authorisation, i.e. one for which
an RMA number has not been issued by JoeCo, will be returned to the purchaser at the purchaser’s expense.
After the RMA number is obtained, the Product (including the power supply) should be shipped to the address given by
JoeCo in protective packaging (the original packaging if possible) with a description of the problem and proof of
Warranty coverage. The RMA number should be clearly written on the package.
Proof of Warranty coverage must be presented in the form of the original dated sales receipt or other positive proof
that the Product is within the Warranty period.
When returning goods under Warranty, the purchaser is responsible for shipment and for the risk of loss or damage
during shipment. JoeCo therefore recommends that such shipments are fully insured and sent by Registered Post,
Recorded Delivery, or via a courier to guarantee receipt.

In the event that JoeCo determines that the Product requires repair because of abnormal use, misuse, abuse, neglect or
accident, it will assess a fair repair or replacement fee. The purchaser will have the option (exercisable within thirty
days of notification by JoeCo) to pay this fee and have the Product repaired and returned, or not pay this fee and have
the Product returned un-repaired at their expense. Thereafter JoeCo reserves the right to dispose of such unrepaired
product without further notification.
JoeCo reserves the right to update any Product returned under Warranty.
JoeCo specifically disclaims all other warranties. The Warranty contained herein supersedes any other warranties or
representations whether express or implied or otherwise, with respect to the Product, and specifically excludes any
implied warranties and/or conditions of merchantability, satisfactory quality, fitness for a particular purpose, accuracy,
non-infringement of third party rights or other implied warranties or conditions.
The remedy for breach of this limited Warranty shall not include any other damages. In no event will JoeCo be liable for
incidental, consequential, special, indirect or other damages or claims, even if its agents have been advised of the
possibility of such damages, resulting from the breach of any express or implied warranty. Such damages may include
but are not limited to the following:
In no event will JoeCo's liability for any damages to the purchaser or any other person exceed the price paid for the
Product, regardless of any form of the claim.
4. Product Changes and Improvements

JoeCo reserves the right to change or improve the design of its products at any time without prior notice.
5. Force Majeure
JoeCo will not be liable or responsible for any failure to perform, or delay in performance of, any of its obligations
under this Warranty that are caused by an event outside of its reasonable control.
6. Waiver
If JoeCo fails, at any time during the term of this Warranty, to insist upon strict performance of any of your obligations
under this Warranty, or if it fails to exercise any of the rights or remedies to which it is entitled under this Warranty,
this shall not constitute a waiver of such rights or remedies and shall not relieve you from compliance with such
obligations.
A waiver by JoeCo of any default shall not constitute a waiver of any subsequent default.
No waiver by JoeCo of any of the terms of this Warranty shall be effective unless it is expressly stated to be a waiver
and is communicated to you in writing.
7. Severability
If any provision of this Warranty is found void, invalid or unenforceable, it will not affect the validity of the balance of
the Warranty, which shall remain valid and enforceable according to its terms. In the event any remedy hereunder is

determined to have failed of its essential purpose, all limitations of liability and exclusion of damages set forth herein
shall remain in full force and effect.
8. Entire Warranty
This Warranty constitutes the entire warranty provided to you by JoeCo and supersedes all prior written agreements
and all representations, undertakings and promises given or implied by anything said or written by JoeCo or by an
authorised JoeCo distributor, reseller or representative. JoeCo will not be bound by any modification or amendment of
this Warranty unless it is in writing and signed by JoeCo.
In the event that any translation of this Warranty (from its original in UK-English language version) is carried out for
different countries and there is a dispute between the UK-English and any non UK-English version, the UK-English
version of this Licence shall take precedence, to the extent not prohibited by local law in your jurisdiction.
9. Jurisdiction
This Warranty shall be construed, interpreted, and governed by the laws of England. This Warranty shall not be
governed by the United Nations Convention on Contracts for the International Sale of Goods, the application of which
is hereby expressly excluded.
Product Returns
To return any JoeCo Product, the purchaser must first call, email or write to JoeCo (see the JoeCo website at www.joeco.co.uk
for contact details) to obtain JoeCo’s agreement to the return and a Returned Materials Authorisation (RMA) number. JoeCo
will issue an RMA and instructions for returning the Product if it agrees that:
- the Product can be returned,

- an incorrect Product has been delivered,
- the Product is faulty and covered by warranty (see Warranty Information), or
- the Product is capable of being repaired if outside warranty
Please note that any Product returned due to incorrect delivery must be in a resalable condition to receive a credit note.
Any Product which is returned to JoeCo or to one of its distributors or resellers without authorisation, i.e. one for which an RMA
number has not been issued by JoeCo, will be returned to the purchaser at the purchaser’s expense.
After the RMA number is obtained, the Product should be shipped to the address provided by JoeCo in protective packaging
(the original packaging if possible) with a note giving the reason for the return. The RMA number should be clearly written on
the package.
When returning goods, the purchaser is responsible for shipment and for the risk of loss or damage during shipment. JoeCo
therefore recommends that such shipments are fully insured and sent by Registered Post, Recorded Delivery, or via a courier to
guarantee receipt.
Where a Product is returned for repair outside warranty, JoeCo will inspect the Product and provide the purchaser with an
estimated fee for repair. The purchaser will have the option (exercisable within thirty days of notification by JoeCo) to pay this
fee and have the Product repaired and returned, or not pay this fee and have the Product returned un-repaired at their
expense. Thereafter JoeCo reserves the right to dispose of such unrepaired product without further notification.
JoeCo reserves the right to update any Product returned for repair.

Product and End User Registration
It is highly recommended that you register yourself as an End User of the BlackBox
Recorder product on the JoeCo website at your earliest opportunity. This completes
your warranty registration, allows you access to software updates which JoeCo may
release from time to time and a lot of additional information.
To register as an End User please go to the JoeCo website www.joeco.co.uk and

select the Log In button to the right-hand side of the blue menu bar. Once in the Log
In area, select the New Registration Link and fill out your details. It is important to fill
out all your details including the full model and serial number of your BlackBox
Recorder or your registration will not be accepted.
Once your registration has been submitted it will be forwarded to JoeCo personnel
who will need to approve your application before issuing you with a password.
JoeCo can only provide support for the current release of software. It is therefore
imperative that you download and use the latest software release
We hope you enjoy using your BlackBox Recorder – we certainly have enjoyed
designing it!

JoeCo BBSG24MP User Guide

Uploaded by

Copyright:

Available Formats

JoeCo BBSG24MP User Guide

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

JoeCo BBSG24MP User Guide

Uploaded by

Copyright:

Available Formats

BLACKBOX

BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2 Page | 1

More information is available in the LOGIN area of the JoeCo Website

IF YOU NEED INFORMATION IN A HURRY, REGISTER AS A

Page | 2 BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2

BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2 Page | 3

Page | 4 BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2

BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2 Page | 5

Page | 6 BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2

Metering Transport Display

Green = signal present: dimly lit at approx -45dBFS; bright at -22dBFS,

Yellow = good signal level: dim at -22dBFS; bright at -10dBFS

Red = getting hot / clip: dim at -10dBFS; bright red at 0dBFS

BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2 Page | 7

Balanced Analogue outputs

Page | 8 BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2

Setting LOW PRO

BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2 Page | 9

Using the BBSG24MP for Recording with SoundGrid

LV1 Touch Screen Host Computer

1GB Ethernet Switch

Maximum distances between devices vary depending on configuration. However,

Page | 10 BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2

To install the SoundGrid BBSG24MP Driver:

Launch Waves Central and select INSTALL PRODUCTS

BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2 Page | 11

System Inventory Tab

IN the following example a BBSG24MP will be assigned to SoundGrid eMotion LV1

Open the eMotion LV1 application

Assigning a BBSG24MP to a Device Rack

Page | 12 BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2

Adjusting the Mic Preamp settings

Choosing and connecting a disk drive

BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2 Page | 13

Checking that everything works

Page | 14 BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2

Page | 16 BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2

Once the unit is recording, the STOP button

However, if you want to mark the end of one

BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2 Page | 17

If the BBR is set to “PLAYBACK LOCKOUT” and

Selecting Recordings for playback

Page | 18 BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2

BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2 Page | 19

nnn-tt.Take Name-Track Name.WAV

You may want to name all the tracks similarly for

Page | 20 BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2

Playback and Virtual Sound Checking

MARK and LOOP operations

BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2 Page | 21

Page | 22 BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2

Summary of Combined Front Panel Controls

BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2 Page | 23

Menu items are of 4 types

Menu structure and operation

Page | 24 BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2

The currently selected Menu item is highlighted in Yellow.

When a Menu item to be adjusted is selected,

Unavailable items are “greyed out” in light red text.

BLACKBOX BBSG24MP SOUNDGRID RECORDER - User Manual v3.2 Page | 25