IADC WellSharp Drilling

SUPERVISOR LEVEL
 IADC WELLSHARP DRILLING OPERATION
SUPERVISOR COURSE

DESCRIPTION • Shut-in procedures ADMISSION REQUIREMENTS

The Supervisor course addresses more advanced • Post shut-in monitoring Office-based Rig, Rig Superintendent,
well control topics such as well kill operations • Risk Management Toolpusher, Drilling Engineer, Drilling
and well control risk management. • Well control methods Supervisor or higher positions.
• Surface well control equipment
• Subsea well control equipment
PURPOSE • Simulator and Written test DURATION
To submit the understanding of well control 5 days
techniques for surface or subsea BOP
installations at Supervisor level according to PARTICIPANTS
OBJECTIVES
International Association of Drilling Contractors Maximum 9px/class
• Understand and apply the principles and
(IADC) WellSharp standards.
procedures used in well control
operations with Surface or Subsea BOP
CONTENT Stacks.
The course covers the following topics: • Use the equipment for well control
• Well control awareness operations with Surface or Subsea BOP
• Well control concepts Stack.
• Mud and pit management • Increase well control understanding by
• Pre-recorded data use of the simulators.
• Kick prevention, Casing, and cementing operation • Show that well control situation can be
• Barriers mastered by use of simulators according
• Shallow gas, Water flows, Tophole drilling to IADC WellSharp standards.
• Abnormal warning signs • Obtain sufficient knowledge about the
• Kick detection course content to pass the Simulator test
• Well control drills and Final exam with minimum 70% score
on each.
 COURSE DETAILS – IADC WELLSHARP DRILLING
SUPERVISOR COURSE

SUPERVISOR COURSE Simulator (Skills) Assessment

PREREQUISITE The participants must:
The Trainee must provide evidence of previously • Line Up Equipment
taking and passing an industry-recognized (e.g., • Check/Set Pressures
• Pits and Valves
WellSharp, WellCAP, IWCF, or Enform
certificate) Driller or higher level well control • Kill Mud Weight
course. • Communicating Kill Plan
• Start-Up
• Maintain BHP
ASSESSMENT PROCESS • Handle Gas at Choke
To pass the assessment and obtain a certificate, • Handle Kill Problem
participants must achieve a minimum score of • Shut Down Kill Operation
70% in each section of the examination
(Knowledge & Simulator Assessment).
REASSESSMENT POLICY
• Score <50% : The trainee must repeat the
Knowledge Assessment (in English full WellSharp training.
Version) • Score 50%-69% : 1 (one) reassessment will
• All questions are stored in a central be available.
database owned and maintained by IADC. • Reassessment may be reassessed on the
• The tests are randomly computer- same day or within 45 days of the original
generated with each question’s answers assessment date.
randomly shuffled.
• Tests are to be given online via computer.
IADC WellSharp Drilling

DRILLER LEVEL
 IADC WELLSHARP DRILLING OPERATION
DRILLER COURSE

DESCRIPTION • Shallow gas, Water flows, Tophole drilling • Show that kick detection and initial
The Driller course is designed for personnel who • Abnormal pressure warning signs reaction can be mastered by use of
are engaged in drilling operations that have • Well control drill simulators.
responsibility for detecting a kick and shutting in • Kick detection • Obtain sufficient knowledge about
the well. • Shut-in procedures the course content to pass the
• Post shut-in monitoring Simulator test and Final exam with
• Casing & cementing considerations minimum 70% score on each.
PURPOSE • Risk Management
To submit the understanding of well control • Well control methods
techniques for surface or subsea BOP • Surface well control equipment
installations at Driller level according to • Subsea well control equipment
International Association of Drilling Contractors • Simulator and Written test ADMISSION REQUIREMENTS
(IADC) WellSharp standards. Assistant Driller, Driller, Floor men,
Derrick men
OBJECTIVES
• Understand and apply the principles and
CONTENT procedures used in well control DURATION
The course covers the following topics: operations with Surface or Subsea BOP 5 days
• Well control awareness Stacks.
• Well control concepts • Use the equipment for well control
• Mud and pit management operations with Surface or Subsea BOP
PARTICIPANTS
• Pre-recorded data Maximum 9px/class
Stack.
• Causes of Kicks • Increase well control understanding by
• Barriers use of the simulators.
 COURSE DETAILS – IADC WELLSHARP DRILLING
DRILLER COURSE

DRILLER COURSE PREREQUISITE Simulator (Skills) Assessment

Provide evidence of previously taking and passing The participants must:
the IADC or other industry-recognized (e.g., • Line Up Equipment
WellSharp, WellCAP, IWCF, or Enform certificate) • Check/Set Pressures
Introductory or higher level well control course. • Set alarms
• Drill ahead
• Record data
ASSESSMENT PROCESS • Detect drilling break
To pass the assessment and obtain a certificate, • Recognize the influx
participants must achieve a minimum score of • Flow check
70% in each section of the examination • BOP closing problem
(Knowledge & Simulator Assessment). • Choke/valve leak
• Pump leak

Knowledge Assessment (in English

Version) REASSESSMENT POLICY
• All questions are stored in a central • Score <50% : The trainee must repeat the
database owned and maintained by IADC. full WellSharp training.
• The tests are randomly computer- • Score 50%-69% : 1 (one) reassessment will
generated with each question’s answers be available.
randomly shuffled. • Reassessment may be reassessed on the
• Tests are to be given online via computer. same day or within 45 days of the original
assessment date.
TERMS AND CONDITIONS
 COURSE SCHEDULE, FEE, PAYMENT TERMS
IADC WELLSHARP DRILLING-SUPERVISOR LEVEL
LEVEL SCHEDULE 2017 VENUE TERM OF REGISTRATION
• Last registration is 3 working days before the
first day of training
Driller • Fill in Registration Form
PT. Trikona Prima FEE
See our Graha Chantia 1st floor
• Driller/Supervisor level: USD 1,350/participant
website Jl. Bangka Raya No. 6
Kemang, Jakarta Selatan 12720
Supervisor • Course Fee include:
IADC WellSharp manual book, stationeries, lunch,
2x coffee break, applicable taxes

• Reassessment Fee: USD 150/participant

(seat availability should be discussed with PT.
CONTACT US: Trikona Prima)
PT. TRIKONA PRIMA
Well Control School Indonesia • Payment should be made 7 days before the first
Graha Chantia 2nd floor day of training, and received in full amount.
Jl. Bangka Raya No. 6
Kemang, Jakarta Selatan 12720 • Cancellation within 7 working days before exam
Indonesia day will be charge a penalty: US$ 250 for full course
Ph : +6221 7193325
Fax : +6221 7193321
Email: admin@wcsindo.com
• Invoice can be prepared in Indonesian Rupiah (IDR)
using Bank Indonesia’s exchange rate on the date
of invoicing.