MB Manual Ga-M52lt v.2.3 e PDF
MB Manual Ga-M52lt v.2.3 e PDF
MB Manual Ga-M52lt v.2.3 e PDF
GA-M52LT-S3P
AM3 socket motherboard for
AMD Phenom™ II processor/AMD Athlon™ II processor
User's Manual
Rev. 2301
12ME-M52LTD3-2301R
Motherboard
GA-M52LT-D3/GA-M52LT-S3P
Motherboard
GA-M52LT-D3/
GA-M52LT-S3P
May 28, 2010
May 28, 2010
Copyright
© 2010 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the specifications and features in this manual may be made by GIGABYTE with-
out prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or
published in any form or by any means without GIGABYTE's prior written permission.
Documentation Classifications
In order to assist in the use of this product, GIGABYTE provides the following types of documentations:
For quick set-up of the product, read the Quick Installation Guide included with the product.
For detailed product information, carefully read the User's Manual.
For instructions on how to use GIGABYTE's unique features, read or download the information
on/from the Support&Downloads\Motherboard\Technology Guide page on our website.
Example:
Table of Contents
Box Contents....................................................................................................................6
Optional Items..................................................................................................................6
GA-M52LT-D3/GA-M52LT-S3P Motherboard Layout.......................................................7
GA-M52LT-D3/GA-M52LT-S3P Motherboard Block Diagram...........................................8
-4-
Chapter 3 Drivers Installation.........................................................................................51
3-1 Installing Chipset Drivers................................................................................ 51
3-2 Application Software....................................................................................... 52
3-3 Technical Manuals........................................................................................... 52
3-4 Contact............................................................................................................ 53
3-5 System............................................................................................................ 53
3-6 Download Center............................................................................................ 54
3-7 New Utilities.................................................................................................... 54
Chapter 5 Appendix.......................................................................................................65
5-1 Configuring SATA Hard Drive(s)...................................................................... 65
5-1-1 Configuring the Onboard SATA Controller...............................................................65
5-1-2 Making a SATA RAID Driver Diskette......................................................................70
5-1-3 Installing the SATA RAID Driver and Operating System..........................................71
5-2 Configuring Audio Input and Output................................................................ 75
5-2-1 Configuring 2/4/5.1/7.1-Channel Audio....................................................................75
5-2-2 Configuring S/PDIF In/Out.......................................................................................77
5-2-3 Configuring Microphone Recording.........................................................................79
5-2-4 Using the Sound Recorder......................................................................................81
5-3 Troubleshooting.............................................................................................. 82
5-3-1 Frequently Asked Questions ..................................................................................82
5-3-2 Troubleshooting Procedure.....................................................................................83
5-4 Regulatory Statements.................................................................................... 85
-5-
Box Contents
GA-M52LT-D3/GA-M52LT-S3P motherboard
Motherboard driver disk
User's Manual
Quick Installation Guide
One IDE cable
One SATA cable
I/O Shield
• The box contents above are for reference only and the actual items shall depend on the product package you obtain.
The box contents are subject to change without notice.
• The motherboard image is for reference only.
Optional Items
Floppy disk drive cable (Part No. 12CF1-1FD001-7*R)
2-port USB 2.0 bracket (Part No. 12CR1-1UB030-5*R)
2-port SATA power cable (Part No. 12CF1-2SERPW-0*R)
S/PDIF In cable (Part No. 12CR1-1SPDIN-0*R)
-6-
GA-M52LT-D3/GA-M52LT-S3P Motherboard Layout
KB_MS ATX_12V
Socket AM3
COAXIAL
LPT
COMA
PWR_FAN
R_USB
CPU_FAN
USB_LAN
AUDIO
F_AUDIO
GA-M52LT-D3/GA-M52LT-S3P
PCIEX16
ATX
SPDIF_O
DDR3_1
DDR3_2
DDR3_3
DDR3_4
PCIEX1_1
Realtek
RTL8201EL
PCIEX1_2
BAT IDE
CODEC ®
PCI1 CLR_CMOS NVIDIA nForce
520LE
CD_IN PCI2
SPDIF_I
PCI3
F_USB2
F_USB1
IT8720
iTE
PCI4
SATA2_1
F_PANEL
SATA2_0
M_BIOS B_BIOS
FDD SYS_FAN
-7-
GA-M52LT-D3/GA-M52LT-S3P Motherboard Block Diagram
CPU CLK+/- (200 MHz)
PCIe CLK
(100 MHz) Hyper Transport
RTL8201EL
Realtek
RJ45
LAN
PCIe CLK
(100 MHz)
2 PCI Express x1
8 USB 2.0/1.1
2 SATA 3Gb/s
PS/2 KB/Mouse
4 PCI
PCI CLK
(33 MHz)
-8-
Chapter 1 Hardware Installation
1-1 Installation Precautions
The motherboard contains numerous delicate electronic circuits and components which can
become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read
the user's manual and follow these procedures:
• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or
warranty sticker provided by your dealer. These stickers are required for warranty validation.
• Always remove the AC power by unplugging the power cord from the power outlet before
installing or removing the motherboard or other hardware components.
• When connecting hardware components to the internal connectors on the motherboard,
make sure they are connected tightly and securely.
• When handling the motherboard, avoid touching any metal leads or connectors.
• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic com-
ponents such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,
keep your hands dry and first touch a metal object to eliminate static electricity.
• Prior to installing the motherboard, please have it on top of an antistatic pad or within an
electrostatic shielding container.
• Before unplugging the power supply cable from the motherboard, make sure the power sup-
ply has been turned off.
• Before turning on the power, make sure the power supply voltage has been set according to
the local voltage standard.
• Before using the product, please verify that all cables and power connectors of your hard-
ware components are connected.
• To prevent damage to the motherboard, do not allow screws to come in contact with the
motherboard circuit or its components.
• Make sure there are no leftover screws or metal components placed on the motherboard or
within the computer casing.
• Do not place the computer system on an uneven surface.
• Do not place the computer system in a high-temperature environment.
• Turning on the computer power during the installation process can lead to damage to sys-
tem components as well as physical harm to the user.
• If you are uncertain about any installation steps or have a problem related to the use of the
product, please consult a certified computer technician.
(Note 1) Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is
installed, the actual memory size displayed will be less than 4 GB.
(Note 2) Whether the CPU/system fan speed control function is supported will depend on the CPU/system
cooler you install.
(Note 3) Available functions in EasyTune may differ by motherboard model.
- 11 - Hardware Installation
1-3 Installing the CPU and CPU Cooler
Read the following guidelines before you begin to install the CPU:
• Make sure that the motherboard supports the CPU.
(Go to GIGABYTE's website for the latest CPU support list.)
• Always turn off the computer and unplug the power cord from the power outlet before installing
the CPU to prevent hardware damage.
• Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may
locate the notches on both sides of the CPU and alignment keys on the CPU socket.)
• Apply an even and thin layer of thermal grease on the surface of the CPU.
• Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and dam-
age of the CPU may occur.
• Set the CPU host frequency in accordance with the CPU specifications. It is not recommended
that the system bus frequency be set beyond hardware specifications since it does not meet the
standard requirements for the peripherals. If you wish to set the frequency beyond the standard
specifications, please do so according to your hardware specifications including the CPU, graph-
ics card, memory, hard drive, etc.
Hardware Installation - 12 -
B. Follow the steps below to correctly install the CPU into the motherboard CPU socket.
• Before installing the CPU, make sure to turn off the computer and unplug the power cord from the
power outlet to prevent damage to the CPU.
• Do not force the CPU into the CPU socket. The CPU cannot fit in if oriented incorrectly. Adjust the
CPU orientation if this occurs.
Step 1:
CPU Socket Completely lift up the CPU socket locking lever.
Locking Lever
Step 2:
Align the CPU pin one (small triangle marking) with the triangle mark
on the CPU socket and gently insert the CPU into the socket. Make
sure that the CPU pins fit perfectly into their holes. Once the CPU is
positioned into its socket, place one finger down on the middle of the
CPU, lowering the locking lever and latching it into the fully locked
position.
- 13 - Hardware Installation
1-3-2 Installing the CPU Cooler
Follow the steps below to correctly install the CPU cooler on the CPU. (The following procedure uses the
GIGABYTE cooler as the example.)
Step 1: Step 2:
Apply an even and thin layer of thermal grease Place the CPU cooler on the CPU.
on the surface of the installed CPU.
Step 3: Step 4:
Hook the CPU cooler clip to the mounting lug Turn the cam handle from the left side to the
on one side of the retention frame. On the other right side (as the picture above shows) to lock
side,push straight down on the the CPU cooler into place. (Refer to your CPU cooler installation
clip to hook it to the mounting lug on the reten- manual for instructions on installing the cooler.)
tion frame.
Step 5:
Finally, attach the power connector of the CPU cooler to the CPU
fan header (CPU_FAN) on the motherboard.
Use extreme care when removing the CPU cooler because the thermal grease/tape between the
CPU cooler and CPU may adhere to the CPU. Inadequately removing the CPU cooler may damage
the CPU.
Hardware Installation - 14 -
1-4 Installing the Memory
Read the following guidelines before you begin to install the memory:
• Make sure that the motherboard supports the memory. It is recommended that memory of the
same capacity, brand, speed, and chips be used.
(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)
• Always turn off the computer and unplug the power cord from the power outlet before installing
the memory to prevent hardware damage.
• Memory modules have a foolproof design. A memory module can be installed in only one direc-
tion. If you are unable to insert the memory, switch the direction.
The four DDR3 memory sockets are divided into two channels and each channel has two memory sockets as
following:
Channel 0: DDR3_1, DDR3_3
Channel 1: DDR3_2, DDR3_4
Due to CPU limitation, read the following guidelines before installing the memory in Dual Channel mode.
1. Dual Channel mode cannot be enabled if only one DDR3 memory module is installed.
2. When enabling Dual Channel mode with two or four memory modules, it is recommended that
memory of the same capacity, brand, speed, and chips be used and installed in the same colored
DDR3 sockets for optimum performance.
- 15 - Hardware Installation
1-4-2 Installing a Memory
Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
DDR3 and DDR2 DIMMs are not compatible to each other or DDR DIMMs. Be sure to install
DDR3 DIMMs on this motherboard.
Notch
DDR3 DIMM
A DDR3 memory module has a notch, so it can only fit in one direction. Follow the steps below to correctly
install your memory modules in the memory sockets.
Step 1:
Note the orientation of the memory module. Spread the retaining
clips at both ends of the memory socket. Place the memory module
on the socket. As indicated in the picture on the left, place your fin-
gers on the top edge of the memory, push down on the memory and
insert it vertically into the memory socket.
Step 2:
The clips at both ends of the socket will snap into place when the
memory module is securely inserted.
Hardware Installation - 16 -
1-5 Installing an Expansion Card
Read the following guidelines before you begin to install an expansion card:
• Make sure the motherboard supports the expansion card. Carefully read the manual that came
with your expansion card.
• Always turn off the computer and unplug the power cord from the power outlet before installing
an expansion card to prevent hardware damage.
PCI Slot
Follow the steps below to correctly install your expansion card in the expansion slot.
1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel.
2. Align the card with the slot, and press down on the card until it is fully seated in the slot.
3. Make sure the metal contacts on the card are completely inserted into the slot.
4. Secure the card’s metal bracket to the chassis back panel with a screw.
5. After installing all expansion cards, replace the chassis cover(s).
6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for your
expansion card(s).
7. Install the driver provided with the expansion card in your operating system.
- 17 - Hardware Installation
1-6 Back Panel Connectors
• When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
Hardware Installation - 18 -
Line Out Jack (Green)
The default line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be
used to connect front speakers in a 4/5.1/7.1-channel audio configuration.
Mic In Jack (Pink)
The default Mic in jack. Microphones must be connected to this jack.
In addition to the default speakers settings, the ~ audio jacks can be reconfigured to per-
form different functions via the audio software. Only microphones still MUST be connected to
the default Mic in jack ( ). Refer to the instructions on setting up a 2/4/5.1/7.1-channel audio
configuration in Chapter 5, "Configuring 2/4/5.1/7.1-Channel Audio."
- 19 - Hardware Installation
1-7 Internal Connectors
1 3
10
13
16
15
11 7
12
6 4 9 14
1) ATX_12V 9) F_PANEL
2) ATX 10) F_AUDIO
3) CPU_FAN 11) CD_IN
4) SYS_FAN 12) SPDIF_I
5) PWR_FAN 13) SPDIF_O
6) FDD 14) F_USB1/F_USB2
7) IDE 15) CLR_CMOS
8) SATA2_0/1 16) BAT
Hardware Installation - 20 -
1/2) ATX_12V/ATX (2x2 12V Power Connector and 2x12 Main Power Connector)
With the use of the power connector, the power supply can supply enough stable power to all the
components on the motherboard. Before connecting the power connector, first make sure the power
supply is turned off and all devices are properly installed. The power connector possesses a foolproof
design. Connect the power supply cable to the power connector in the correct orientation. The 12V
power connector mainly supplies power to the CPU. If the 12V power connector is not connected, the
computer will not start.
To meet expansion requirements, it is recommended that a power supply that can withstand
high power consumption be used (500W or greater). If a power supply is used that does not
provide the required power, the result can lead to an unstable or unbootable system.
ATX_12V:
Pin No. Definition
2 1
1 GND
2 GND
3 +12V
4 3
4 +12V
ATX_12V
ATX:
12 24 Pin No. Definition Pin No. Definition
1 3.3V 13 3.3V
2 3.3V 14 -12V
3 GND 15 GND
4 +5V 16 PS_ON (soft On/Off)
5 GND 17 GND
6 +5V 18 GND
7 GND 19 GND
8 Power Good 20 -5V
9 5VSB (stand by +5V) 21 +5V
10 +12V 22 +5V
11 +12V (Only for 2x12-pin ATX) 23 +5V (Only for 2x12-pin ATX)
1 13 12 3.3V (Only for 2x12-pin ATX) 24 GND (Only for 2x12-pin ATX)
ATX
- 21 - Hardware Installation
3/4/5) CPU_FAN/SYS_FAN/PWR_FAN (Fan Headers)
The motherboard has a 4-pin CPU fan header (CPU_FAN), a 3-pin system fan header (SYS_FAN), and
a 3-pin power fan header (PWR_FAN). Most fan headers possess a foolproof insertion design. When
connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the
ground wire). The motherboard supports CPU fan speed control, which requires the use of a CPU fan
with fan speed control design. For optimum heat dissipation, it is recommended that a system fan be
installed inside the chassis.
CPU_FAN:
Pin No. Definition
1 1 GND
CPU_FAN 2 +12V / Speed Control
3 Sense
4 Speed Control
SYS_FAN:
Pin No. Definition
1 1 GND
SYS_FAN 2 +12V / Speed Control
3 Sense
PWR_FAN:
Pin No. Definition
1 GND
1
2 +12V
PWR_FAN
3 Sense
• Be sure to connect fan cables to the fan headers to prevent your CPU and system from over-
heating. Overheating may result in damage to the CPU or the system may hang.
• These fan headers are not configuration jumper blocks. Do not place a jumper cap on the
headers.
33 1
34 2
Hardware Installation - 22 -
7) IDE (IDE Connector)
The IDE connector supports up to two IDE devices such as hard drives and optical drives. Before attach-
ing the IDE cable, locate the foolproof groove on the connector. If you wish to connect two IDE devices,
remember to set the jumpers and the cabling according to the role of the IDE devices (for example,
master or slave). (For information about configuring master/slave settings for the IDE devices, read the
instructions from the device manufacturers.)
40 39
DEBUG
PORT
DEBUG
2 PORT1
- 23 - Hardware Installation
9) F_PANEL (Front Panel Header)
Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor and system status
indicator on the chassis to this header according to the pin assignments below. Note the positive and
negative pins before connecting the cables.
Message/Power/ Power
Sleep LED Switch Speaker
MSG+
PW+
SPEAK+
SPEAK-
MSG-
PW-
2 20
1 19
HD-
RES+
CI+
PWR+
PWR-
HD+
RES-
CI-
Hard Drive Reset Power LED
Activity LED Switch
Chassis Intrusion
Header
The front panel design may differ by chassis. A front panel module mainly consists of power
switch, reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your
chassis front panel module to this header, make sure the wire assignments and the pin assign-
ments are matched correctly.
Hardware Installation - 24 -
10) F_AUDIO (Front Panel Audio Header)
The front panel audio header supports Intel High Definition audio (HD) and AC'97 audio. You may connect
your chassis front panel audio module to this header. Make sure the wire assignments of the module con-
nector match the pin assignments of the motherboard header. Incorrect connection between the module
connector and the motherboard header will make the device unable to work or even damage it.
For HD Front Panel Audio: For AC'97 Front Panel Audio:
Pin No. Definition Pin No. Definition
10 9 1 MIC2_L 1 MIC
2 GND 2 GND
2 1 3 MIC2_R 3 MIC Power
4 -ACZ_DET 4 NC
5 LINE2_R 5 Line Out (R)
6 GND 6 NC
7 FAUDIO_JD 7 NC
8 No Pin 8 No Pin
9 LINE2_L 9 Line Out (L)
10 GND 10 NC
• The front panel audio header supports HD audio by default. If your chassis provides an AC'97
front panel audio module, refer to the instructions on how to activate AC'97 functionality via
the audio software in Chapter 5, "Configuring 2/4/5.1/7.1-Channel Audio."
• Audio signals will be present on both of the front and back panel audio connections simultane-
ously. If you want to mute the back panel audio (only supported when using an HD front panel
audio module), refer to Chapter 5, "Configuring 2/4/5.1/7.1-Channel Audio."
• Some chassis provide a front panel audio module that has separated connectors on each wire
instead of a single plug. For information about connecting the front panel audio module that
has different wire assignments, please contact the chassis manufacturer.
- 25 - Hardware Installation
12) SPDIF_I (S/PDIF In Header)
This header supports digital S/PDIF In and can connect to an audio device that supports digital audio out
via an optional S/PDIF In cable. For purchasing the optional S/PDIF In cable, please contact the local
dealer.
1
Pin No. Definition
1 Power
2 SPDIFI
3 GND
Hardware Installation - 26 -
14) F_USB1/F_USB2 (USB Headers)
The headers conform to USB 2.0/1.1 specification. Each USB header can provide two USB ports via an
optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer.
• Do not plug the IEEE 1394 bracket (2x5-pin) cable into the USB header.
• Prior to installing the USB bracket, be sure to turn off your computer and unplug the power
cord from the power outlet to prevent damage to the USB bracket.
Open: Normal
• Always turn off your computer and unplug the power cord from the power outlet before clear-
ing the CMOS values.
• After clearing the CMOS values and before turning on your computer, be sure to remove the
jumper cap from the jumper. Failure to do so may cause damage to the motherboard.
• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized De-
faults) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS
configurations).
- 27 - Hardware Installation
16) BAT (Battery)
The battery provides power to keep the values (such as BIOS configurations, date, and time information)
in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a
low level, or the CMOS values may not be accurate or may be lost.
Hardware Installation - 28 -
Chapter 2 BIOS Setup
BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the
motherboard. Its major functions include conducting the Power-On Self-Test (POST) during system startup,
saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that
allows the user to modify basic system configuration settings or to activate certain system features. When
the power is turned off, the battery on the motherboard supplies the necessary power to the CMOS to keep
the configuration values in the CMOS.
To access the BIOS Setup program, press the <Delete> key during the POST when the power is turned on.
To see more advanced BIOS Setup menu options, you can press <Ctrl> + <F1> in the main menu of the
BIOS Setup program.
To upgrade the BIOS, use either the GIGABYTE Q-Flash or @BIOS utility.
• Q-Flash allows the user to quickly and easily upgrade or back up BIOS without entering the operating
system.
• @BIOS is a Windows-based utility that searches and downloads the latest version of BIOS from the
Internet and updates the BIOS.
For instructions on using the Q-Flash and @BIOS utilities, refer to Chapter 4, "BIOS Update Utilities."
• Because BIOS flashing is potentially risky, if you do not encounter problems using the current
version of BIOS, it is recommended that you not flash the BIOS. To flash the BIOS, do it with
caution. Inadequate BIOS flashing may result in system malfunction.
• BIOS will emit a beep code during the POST. Refer to Chapter 5, "Troubleshooting," for the beep
codes description.
• It is recommended that you not alter the default settings (unless you need to) to prevent system
instability or other unexpected results. Inadequately altering the settings may result in system's
failure to boot. If this occurs, try to clear the CMOS values and reset the board to default values.
(Refer to the "Load Optimized Defaults" section in this chapter or introductions of the battery/
clearing CMOS jumper in Chapter 1 for how to clear the CMOS values.)
- 29 - BIOS Setup
2-1 Startup Screen
The following screens may appear when the computer boots.
A. The LOGO Screen (Default)
Function Keys
<DEL>: BIOS Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash Function Keys
05/10/2010-NF-520LE-6A61KG0LC-00
Function Keys:
<TAB>: POST SCREEN
Press the <Tab> key to show the BIOS POST screen. To show the BIOS POST screen at system start-
up, refer to the instructions on the Full Screen LOGO Show item on page 39.
<DEL>: BIOS SETUP\Q-FLASH
Press the <Delete> key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup.
<F9>: XPRESS RECOVERY2
If you have ever entered Xpress Recovery2 to back up hard drive data using the driver disk, the <F9>
key can be used for subsequent access to Xpress Recovery2 during the POST. For more information,
refer to Chapter 4, "Xpress Recovery2."
<F12>: BOOT MENU
Boot Menu allows you to set the first boot device without entering BIOS Setup. In Boot Menu, use the up
arrow key <h> or the down arrow key <i> to select the first boot device, then press <Enter> to accept.
To exit Boot Menu, press <Esc>. The system will directly boot from the device configured in Boot Menu.
Note: The setting in Boot Menu is effective for one time only. After system restart, the device boot order
will still be based on BIOS Setup settings. You can access Boot Menu again to change the first boot de-
vice setting as needed.
<END>: Q-FLASH
Press the <End> key to access the Q-Flash utility directly without having to enter BIOS Setup first.
BIOS Setup - 30 -
2-2 The Main Menu
Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use ar-
row keys to move among the items and press <Enter> to accept or enter a sub-menu.
(Sample BIOS Version: GA-M52LT-D3, E3)
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
• If you do not find the settings you want in the Main Menu or a submenu, press <Ctrl>+<F1> to
access more advanced options.
• When the system is not stable as usual, select the Load Optimized Defaults item to set your
system to its defaults.
• The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS
version.
- 31 - BIOS Setup
MB Intelligent Tweaker(M.I.T.)
Use this menu to configure the clock, frequency and voltages of your CPU, memory, etc.
Standard CMOS Features
Use this menu to configure the system time and date, hard drive types, floppy disk drive types, and the
type of errors that stop the system boot, etc.
Advanced BIOS Features
Use this menu to configure the device boot order, advanced features available on the CPU, and the pri-
mary display adapter.
Integrated Peripherals
Use this menu to configure all peripheral devices, such as IDE, SATA, USB, integrated audio, and inte-
grated LAN, etc.
Power Management Setup
Use this menu to configure all the power-saving functions.
PnP/PCI Configurations
Use this menu to configure the system’s PCI & PnP resources.
PC Health Status
Use this menu to see information about autodetected system/CPU temperature, system voltage and fan
speed, etc.
Load Fail-Safe Defaults
Fail-Safe defaults are factory settings for the most stable, minimal-performance system operations.
Load Optimized Defaults
Optimized defaults are factory settings for optimal-performance system operations.
Set Supervisor Password
Change, set, or disable password. It allows you to restrict access to the system and BIOS Setup.
A supervisor password allows you to make changes in BIOS Setup.
Set User Password
Change, set, or disable password. It allows you to restrict access to the system and BIOS Setup.
A user password only allows you to view the BIOS settings but not to make changes.
Save & Exit Setup
Save all the changes made in the BIOS Setup program to the CMOS and exit BIOS Setup. (Pressing
<F10> can also carry out this task.)
Exit Without Saving
Abandon all changes and the previous settings remain in effect. Pressing <Y> to the confirmation mes-
sage will exit BIOS Setup. (Pressing <Esc> can also carry out this task.)
BIOS Setup - 32 -
2-3 MB Intelligent Tweaker(M.I.T.)
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
MB Intelligent Tweaker(M.I.T.)
CPU Frequency (MHz) [200] Item Help
PCIE Clock (MHz) [100] Menu Level
CPU Clock Ratio [Auto]
CPU North Bridge Freq. [Auto]
Set Memory Clock [Auto]
x Memory Clock x6.66 1333Mhz
} DRAM Configuration [Press Enter]
DDR3 Voltage Control [Normal]
CPU NB VID Control [Normal]
CPU Voltage Control [Normal]
Normal CPU Vcore 1.3250V
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Whether the system will work stably with the overclock settings you made is dependent on your over-
all system configurations. Incorrectly doing overclock may result in damage to CPU, chipset, or
memory and reduce the useful life of these components. This page is for advanced users only and
we recommend you not to alter the default settings to prevent system instability or other unexpected
results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear
the CMOS values and reset the board to default values.)
CPU Frequency(MHz)
Allows you to manually set the CPU host frequency. The adjustable range is from 200 MHz to 500 MHz.
Important It is highly recommended that the CPU frequency be set in accordance with the CPU specifi-
cations.
PCIE Clock(MHz)
Allows you to manually set the PCIe clock frequency. The adjustable range is from 100 MHz to 145 MHz.
(Default: 100)
CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU
being used.
CPU NorthBridge Freq.
Allows you to alter the North Bridge controller frequency for the installed CPU. The adjustable range is
dependent on the CPU being used.
Set Memory Clock
Determines whether to manually set the memory clock. Auto lets BIOS automatically set the memory
clock as required. Manual allows the memory clock control item below to be configurable. (Default: Auto)
- 33 - BIOS Setup
Memory Clock
This option is configurable only when Set Memory Clock is set to Manual.
X4.00 Sets Memory Clock to X4.00.
X5.33 Sets Memory Clock to X5.33.
X6.66 Sets Memory Clock to X6.66.
X8.00 Sets Memory Clock to X8.00.
DRAM Configuration
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
DRAM Configuration
DCTs Mode (Note) [Unganged] Item Help
DDR3 Timing Items [Auto] SPD Auto Menu Level
x CAS# latency Auto 9T 9T
x RAS to CAS R/W Delay Auto 9T 9T
x Row Precharge Time Auto 9T 9T
x Minimum RAS Active Time Auto 24T 24T
x 1T/2T Command Timing Auto -- --
x TwTr Command Delay Auto 5T 5T
x Trfc0 for DIMM1 Auto 110ns 110ns
x Trfc2 for DIMM2 Auto -- --
x Trfc1 for DIMM3 Auto -- --
x Trfc3 for DIMM4 Auto -- --
x Write Recovery Time Auto 10T 10T
x Precharge Time Auto 5T 5T
x Row Cycle Time Auto 33T 33T
x RAS to RAS Delay Auto 4T 4T
CKE Power Down Mode [Disabled]
CKE Power Down Control [per Channel]
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
(Note) This item appears only if you install a CPU that supports this feature.
BIOS Setup - 34 -
TwTr Command Delay
Options are: Auto (default), 4T~7T.
Trfc0 for DIMM1
Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.
Trfc2 for DIMM2
Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.
Trfc1 for DIMM3
Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.
Trfc3 for DIMM4
Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.
Write Recovery Time
Options are: Auto (default), 5T~12T.
Precharge Time
Options are: Auto (default), 4T~7T.
Row Cycle Time
Options are: Auto (default), 11T~42T.
RAS to RAS Delay
Options are: Auto (default), 4T~7T.
CKE Power Down Mode
Determines whether to set the memory to power down mode when the CKE pin is closed. (Default: Dis-
abled)
CKE Power Down Control
Allows you to select a CKE power down mode. Options are per Channel (Default), per CS.
- 35 - BIOS Setup
2-4 Standard CMOS Features
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Standard CMOS Features
Date (mm:dd:yy) Fri, Mar 12 2010 Item Help
Time (hh:mm:ss) 22:31:24 Menu Level
Drive A [1.44M, 3.5"]
Floppy 3 Mode Support [Disabled]
Halt On [All, But Keyboard]
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Date (mm:dd:yy)
Sets the system date. The date format is week (read-only), month, date and year. Select the desired field
and use the up arrow or down arrow key to set the date.
Time (hh:mm:ss)
Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or
down arrow key to set the time.
IDE Channel 0 Master/Slave
IDE HDD Auto-Detection
Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.
IDE Channel 0 Master/Slave
Configure your IDE/SATA devices by using one of the two methods below:
• Auto Lets the BIOS automatically detect IDE/SATA devices during the POST. (Default)
• None If no IDE/SATA devices are used, set this item to None so the system will skip
the detection of the device during the POST for faster system startup.
Access Mode Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.
IDE Channel 2, 3 Master
IDE Auto-Detection
Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.
Extended IDE Drive
Configure your IDE/SATA devices by using one of the two methods below:
• Auto Lets the BIOS automatically detect IDE/SATA devices during the POST. (Default)
• None If no IDE/SATA devices are used, set this item to None so the system will skip
the detection of the device during the POST for faster system startup.
Access Mode Sets the hard drive access mode. Options are: Auto (default), Large.
BIOS Setup - 36 -
The following fields display your hard drive specifications. If you wish to enter the parameters manually,
refer to the information on the hard drive.
Capacity Approximate capacity of the currently installed hard drive.
Cylinder Number of cylinders.
Head Number of heads.
Precomp Write precompensation cylinder.
Landing Zone Landing zone.
Sector Number of sectors.
Drive A
Allows you to select the type of floppy disk drive installed in your system. If you do not install a floppy
disk drive, set this item to None. Options are: None, 360K/5.25", 1.2M/5.25", 720K/3.5", 1.44M/3.5",
2.88M/3.5".
Floppy 3 Mode Support
Allows you to specify whether the installed floppy disk drive is 3-mode floppy disk drive, a Japanese
standard floppy disk drive. Options are: Disabled (default), Drive A.
Halt On
Allows you to determine whether the system will stop for an error during the POST.
All Errors Whenever the BIOS detects a non-fatal error the system boot will stop.
No Errors The system boot will not stop for any error.
All, But Keyboard The system boot will not stop for a keyboard error but stop for all other errors.
(Default)
All, But Diskette The system boot will not stop for a floppy disk drive error but stop for all other
errors.
All, But Disk/Key The system boot will not stop for a keyboard or a floppy disk drive error but it
will stop for all other errors.
Memory
These fields are read-only and are determined by the BIOS POST.
Base Memory Also called conventional memory. Typically, 640 KB will be reserved for the
MS-DOS operating system.
Extended Memory The amount of extended memory.
- 37 - BIOS Setup
2-5 Advanced BIOS Features
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Advanced BIOS Features
AMD C1E Support (Note) [Disabled] Item Help
Virtualization [Disabled] Menu Level
AMD K8 Cool&Quiet control [Auto]
CPU Unlock (Note) [Disabled]
CPU core Control [Auto]
x CPU core 2 (Note) Enabled
x CPU core 3 (Note) Enabled
} Hard Disk Boot Priority [Press Enter]
First Boot Device [Hard Disk]
Second Boot Device [CDROM]
Third Boot Device [Floppy]
Password Check [Setup]
HDD S.M.A.R.T. Capability [Disabled]
Away Mode [Disabled]
Full Screen LOGO Show [Enabled]
Backup BIOS Image to HDD [Disabled]
Init Display First [PEG]
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Allows you to determine whether unlock hidden CPU cores. (Default: Disabled)
CPU core Control
Allows you to determine whether to manually enable/disable CPU Core 2 and Core 3. Manual allows the
two items below to be configurable.
Auto Lets the BIOS to enable all CPU cores (number of cores available depends on the
CPU being used). (Default)
Manual Allows you to individually enable/disable CPU Core 2 and Core 3.
CPU core 2 (Note)
Enables or disables CPU Core 2. (Default: Enabled)
CPU core 3 (Note)
Enables or disables CPU Core 3. (Default: Enabled)
(Note) This item is present only if you install a CPU that supports this feature.
BIOS Setup - 38 -
Hard Disk Boot Priority
Specifies the sequence of loading the operating system from the installed hard drives. Use the up or
down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus key <-> (or
<PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when finished.
First/Second/Third Boot Device
Specifies the boot order from the available devices. Use the up or down arrow key to select a device
and press <Enter> to accept. Options are: Floppy, LS120, Hard Disk, CDROM, ZIP, USB-FDD, USB-ZIP,
USB-CDROM, USB-HDD, Legacy LAN, Disabled.
Password Check
Specifies whether a password is required every time the system boots, or only when you enter BIOS
Setup. After configuring this item, set the password(s) under the Set Supervisor/User Password item in
the BIOS Main Menu.
Setup A password is only required for entering the BIOS Setup program. (Default)
System A password is required for booting the system and for entering the BIOS Setup
program.
HDD S.M.A.R.T. Capability
Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology) capability of your hard
drive. This feature allows your system to report read/write errors of the hard drive and to issue warnings
when a third party hardware monitor utility is installed. (Default: Enabled)
Away Mode
Enables or disables Away Mode in Windows XP Media Center operating system. Away Mode allows the
system to silently perform unattended tasks while in a low-power mode that appears off.
(Default: Disabled)
Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled displays
normal POST message. (Default: Enabled)
Backup BIOS Image to HDD
Allows the system to copy the BIOS image file to the hard drive. If the system BIOS is corrupted, it will
be recovered from this image file. (Default: Disabled)
Init Display First
Specifies the first initiation of the monitor display from the installed PCI graphics card or the PCI Express
graphics card
PCI Slot Sets the PCI graphics card as the first display.
PEG Sets the PCI Express graphics card as the first display. (Default)
- 39 - BIOS Setup
2-6 Integrated Peripherals
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Integrated Peripherals
On-Chip IDE Channel
NV SATA Controller
[Enabled]
[Enabled]
Item Help
Menu Level
IDE Prefetch Mode [Enabled]
} Serial-ATA RAID Config [Press Enter]
Onboard Audio Function [Auto]
On-Chip MAC Lan [Auto]
Onboard LAN Boot ROM [Disabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
x ECP Mode Use DMA 3
USB Controllers [Enabled]
USB Legacy Function [Enabled]
USB Storage Function [Enabled]
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
BIOS Setup - 40 -
NV SATA 1 Secondary RAID
Enables or disables RAID for the second channel of the integrated SATA 3Gb/s controller. This item is
configurable only if the NV SATA RAID function item is set to Enabled. (Default: Enabled)
- 41 - BIOS Setup
2-7 Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Power Management Setup
ACPI Suspend Type [S3(STR)] Item Help
Soft-Off by Power button [Instant-Off] Menu Level
PME Event Wake Up [Enabled]
Modem Ring On [Enabled]
USB Resume from Suspend [Enabled]
Power-On by Alarm [Disabled]
x Day of Month Alarm Everyday
x Time (hh:mm:ss) Alarm 0:0:0
HPET Support (Note) [Enabled]
HPET Mode (Note) [32-bit mode]
Power On By Mouse [Disabled]
Power On By Keyboard [Disabled]
x KB Power ON Password Enter
AC Back Function [Soft-Off]
ErP Support [Disabled]
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
BIOS Setup - 42 -
Power-On by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Day of Month Alarm: Turn on the system at a specific time on each day or on a specific day in a
month.
Time (hh: mm: ss) Alarm: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
HPET Support (Note)
Enables or disables High Precision Event Timer (HPET) for Windows 7/Vista operating system.
(Default: Enabled)
HPET Mode (Note)
Allows you to select the HPET mode for your Windows 7/Vista operating system. Select 32-bit mode
when you install 32-bit Windows 7/Vista; select 64-bit mode when you install 64-bit Windows 7/Vista.
This item is configurable only if the HPET Support is set to Enabled. (Default: 32-bit mode)
Power On By Mouse
Allows the system to be turned on by a PS/2 mouse wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
Disabled Disables this function. (Default)
Double Click Double click on left button on the PS/2 mouse to turn on the system.
Power On By Keyboard
Allows the system to be turned on by a PS/2 keyboard wake-up event.
Note: you need an ATX power supply providing at least 1A on the +5VSB lead.
Disabled Disables this function. (Default)
Password Set a password with 1~5 characters to turn on the system.
Any KEY Press any key on the keyboard to turn on the system.
Keyboard 98 Press POWER button on the Windows 98 keyboard to turn on the system.
KB Power ON Password
Set the password when Power On by Keyboard is set to Password. Press <Enter> on this item and set
a password with up to 5 characters and then press <Enter> to accept. To turn on the system, enter the
password and press <Enter>.
Note: To cancel the password, press <Enter> on this item. When prompted for the password, press <En-
ter> again without entering the password to clear the password settings.
AC Back Function
Determines the state of the system after the return of power from an AC power loss.
Soft-Off The system stays off upon the return of the AC power. (Default)
Full-On The system is turned on upon the return of the AC power.
ErP Support
Determines whether to let the system consume less than 1W power in S5 (shutdown) state. (Default:
Disabled)
Note: When this item is set to Enabled, the following four functions will become unavailable:
PME event wake up, power on by mouse, power on by keyboard, and wake on LAN.
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
BIOS Setup - 44 -
2-9 PC Health Status
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
PC Health Status
Reset Case Open Status [Disabled] Item Help
Case Opened No Menu Level
Vcore 1.364V
DDR3 1.5V 1.552V
+3.3V 3.280V
+12V 12.048V
Current System Temperature 38oC
Current CPU Temperature 36oC
Current CPU FAN Speed 1962 RPM
Current SYSTEM FAN Speed 0 RPM
System Warning Temperature [Disabled]
CPU Warning Temperature [Disabled]
CPU FAN Fail Warning [Disabled]
SYSTEM FAN Fail Warning [Disabled]
CPU Smart FAN Control [Enabled]
CPU Smart FAN Mode [Auto]
System Smart FAN Control [Enabled]
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
- 45 - BIOS Setup
CPU Smart FAN Mode
Specifies how to control CPU fan speed. This item is configurable only if CPU Smart FAN Control is set
to Enabled.
Auto Lets the BIOS automatically detect the type of CPU fan installed and sets the optimal
CPU fan control mode. (Default)
Voltage Sets Voltage mode for a 3-pin CPU fan.
PWM Sets PWM mode for a 4-pin CPU fan.
System Smart FAN Control
Enables or disables the system fan speed control function. Enabled allows the system fan to run at dif-
ferent speed according to the system temperature. If disabled, the system fan runs at full speed.
(Default: Enabled)
BIOS Setup - 46 -
2-10 Load Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Press <Enter> on this item and then press the <Y> key to load the safest BIOS default settings.
In case system instability occurs, you may try to load Fail-Safe defaults, which are the safest and most stable
BIOS settings for the motherboard.
Press <Enter> on this item and then press the <Y> key to load the optimal BIOS default settings.
The BIOS defaults settings help the system to operate in optimum state. Always load the Optimized defaults
after updating the BIOS or after clearing the CMOS values.
- 47 - BIOS Setup
2-12 Set Supervisor/User Password
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Press <Enter> on this item and type the password with up to 8 characters and then press <Enter>. You will
be requested to confirm the password. Type the password again and press <Enter>.
The BIOS Setup program allows you to specify two separate passwords:
Supervisor Password
When a system password is set and the Password Check item in Advanced BIOS Features is set to
Setup, you must enter the supervisor password for entering BIOS Setup and making BIOS changes.
When the Password Check item is set to System, you must enter the supervisor password (or user
password) at system startup and when entering BIOS Setup.
User Password
When the Password Check item is set to System, you must enter the supervisor password (or user
password) at system startup to continue system boot. In BIOS Setup, you must enter the supervisor
password if you wish to make changes to BIOS settings. The user password only allows you to view the
BIOS settings but not to make changes.
To clear the password, press <Enter> on the password item and when requested for the password, press
<Enter> again. The message "PASSWORD DISABLED" will appear, indicating the password has been can-
celled.
BIOS Setup - 48 -
2-13 Save & Exit Setup
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Press <Enter> on this item and press the <Y> key. This saves the changes to the CMOS and exits the BIOS
Setup program. Press <N> or <Esc> to return to the BIOS Setup Main Menu.
Press <Enter> on this item and press the <Y> key. This exits the BIOS Setup without saving the changes
made in BIOS Setup to the CMOS. Press <N> or <Esc> to return to the BIOS Setup Main Menu.
- 49 - BIOS Setup
BIOS Setup - 50 -
Chapter 3 Drivers Installation
• Before installing the drivers, first install the operating system.
• After installing the operating system, insert the motherboard driver disk into your optical drive.
The driver Autorun screen is automatically displayed which looks like that shown in the screen
shot below. (If the driver Autorun screen does not appear automatically, go to My Computer,
double-click the optical drive and execute the Run.exe program.)
After inserting the driver disk, "Xpress Install" will automatically scan your system and then list all the drivers
that are recommended to install. You can click the Install All button and "Xpress Install" will install all the rec-
ommended drivers. Or click Install Single Items to manually select the drivers you wish to install.
• Please ignore the popup dialog box(es) (e.g. the Found New Hardware Wizard) displayed
when "Xpress Install" is installing the drivers. Failure to do so may affect the driver installation.
• Some device drivers will restart your system automatically during the driver installation. After the
system restart, "Xpress Install" will continue to install other drivers.
• After the drivers are installed, follow the on-screen instructions to restart your system. You can
install other applications included in the motherboard driver disk.
• For USB 2.0 driver support under the Windows XP operating system, please install the Windows
XP Service Pack 1 or later. After installing the SP1 (or later), if a question mark still exists in
Universal Serial Bus Controller in Device Manager, please remove the question mark (by
right-clicking your mouse and select Uninstall) and restart the system. (The system will then
autodetect and install the USB 2.0 driver.)
- 51 - Drivers Installation
3-2 Application Software
This page displays all the utilities and applications that GIGABYTE develops and some free software. You
can click the Install button on the right of an item to install it.
Drivers Installation - 52 -
3-4 Contact
For the detailed contact information of the GIGABYTE Taiwan headquarter or worldwide branch offices, click
the URL on this page to link to the GIGABYTE website.
3-5 System
This page provides the basic system information.
- 53 - Drivers Installation
3-6 Download Center
To update the BIOS, drivers, or applications, click the Download Center button to link to the GIGABYTE
website. The latest version of the BIOS, drivers, or applications will be displayed.
Drivers Installation - 54 -
Chapter 4 Unique Features
4-1 Xpress Recovery2
Xpress Recovery2 is a utility that allows you to quickly compress and
back up your system data and perform restoration of it. Supporting NTFS,
FAT32, and FAT16 file systems, Xpress Recovery2 can back up data on
PATA and SATA hard drives and restore it.
Before You Begin:
• Xpress Recovery2 will check the first physical hard drive (Note) for the operating system. Xpress Recovery2
can only back up/restore the first physical hard drive that has the operating system installed.
• As Xpress Recovery2 will save the backup file at the end of the hard drive, make sure to leave enough un-
allocated space in advanced (10 GB or more is recommended; actual size requirements vary, depending
on the amount of data).
• It is recommended to back up your system soon after the operating system and drivers are installed.
• The amount of data and hard drive access speed may affect the speed at which the data is backed up/
restored.
• It takes longer to back up a hard drive than to restore it.
System Requirements:
• At least 512 MB of system memory
• VESA compatible graphics card
• Windows XP with SP1 or later, Windows Vista
• Xpress Recovery and Xpress Recovery2 are different utilities. For example, a backup file created
with Xpress Recovery cannot be restored using Xpress Recovery2.
• USB hard drives are not supported.
• Hard drives in RAID/AHCI mode are not supported.
Installation and Configuration:
Turn on your system to boot from the Windows Vista setup disk.
A. Installing Windows Vista and Partitioning the Hard Drive
Step 1: Step 2:
Click Drive options. Click New.
(Note) Xpress Recovery2 checks the first physical hard drive in the following sequence: The first PATA IDE connector, the
second PATA IDE connector, the first SATA connector, the second SATA connector and so forth. For example, when hard
drives are attached to the first IDE and the first SATA connectors, the hard drive on the first IDE connector is the first physical
drive. When hard drives are attached to the first and second SATA connectors, the hard drive on the first SATA connector is
the first physical drive.
- 55 - Unique Features
Step 3: Step 4:
When partitioning your hard drive, make sure to After the operating system is installed, right-click
leave unallocated space (10 GB or more is recom- the Computer icon on your desktop and select
mended; actual size requirements vary, depending Manage. Go to Disk Management to check disk
on the amount of data) and begin the installation of allocation.
the operating system.
Step 5:
Xpress Recovery2 will save the backup file to the unallocated
space (black stripe along the top). Please note that if there is no
enough unallocated space, Xpress Recovery2 cannot save the
backup file.
Step 1: Step 2:
Select BACKUP to start backing up your hard drive When finished, go to Disk Management to check
data. disk allocation.
Unique Features - 56 -
D. Using the Restore Function in Xpress Recovery2
Select RESTORE to restore the backup to your hard drive in
case the system breaks down. The RESTORE option will not be
present if no backup is created before.
Step 1: Step 2:
If you wish to remove the backup file, select After the backup file is removed, no backup image
REMOVE. file will be present in Disk Management and hard
drive space will be freed up.
- 57 - Unique Features
4-2 BIOS Update Utilities
GIGABYTE motherboards provide two unique BIOS update tools, Q-Flash™ and @BIOS™. GIGABYTE
Q-Flash and @BIOS are easy-to-use and allow you to update the BIOS without the need to enter MS-DOS
mode. Additionally, this motherboard features the DualBIOS™ design, which enhances protection for the
safety and stability of your computer by adding one more physical BIOS chip.
What is DualBIOS™?
Motherboards that support DualBIOS have two BIOS onboard, a main BIOS and
a backup BIOS. Normally, the system works on the main BIOS. However, if the
main BIOS is corrupted or damaged, the backup BIOS will take over on the next system boot and copy the
BIOS file to the main BIOS to ensure normal system operation. For the sake of system safety, users cannot
update the backup BIOS manually.
What is Q-Flash™?
With Q-Flash you can update the system BIOS without having to enter operating
systems like MS-DOS or Window first. Embedded in the BIOS, the Q-Flash tool
frees you from the hassles of going through complicated BIOS flashing process.
What is @BIOS™?
@BIOS allows you to update the system BIOS while in the Windows environ-
ment. @BIOS will download the latest BIOS file from the nearest @BIOS server
site and update the BIOS.
<DEL>: BIOS Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash
05/10/2010-NF-520LE-6A61KG0LC-00
Because BIOS flashing is potentially risky, please do it with caution. Inadequate BIOS flashing may
result in system malfunction.
Unique Features - 58 -
B. Updating the BIOS
When updating the BIOS, choose the location where the BIOS file is saved. The following procedure as-
sumes that you save the BIOS file to a floppy disk.
Step 1:
1. Insert the floppy disk containing the BIOS file into the floppy disk drive. In the main menu of Q-Flash, use
the up or down arrow key to select Update BIOS from Drive and press <Enter>.
• The Save Main BIOS to Drive option allows you to save the current BIOS file.
• Q-Flash only supports USB flash drive or hard drives using FAT32/16/12 file system.
• If the BIOS update file is saved to a hard drive in RAID/AHCI mode or a hard drive attached to
an independent IDE/SATA controller, use the <End> key during the POST to access Q-Flash.
2. Select Floppy A and press <Enter>.
Q-Flash Utility v2.15
Flash Type/Size................................. MXIC 25L8005/8006 1M
0 file(s) found
Keep DMI Data Enable
Floppy A Load CMOS Default Enable <Drive>
HDD 1-0 Update BIOS from Drive <Drive>
Save BIOS to Drive
Enter : Run hi:Move ESC:Reset F10:Power Off
Total size : 0 Free size : 0
Step 2:
The process of the system reading the BIOS file from the floppy disk is displayed on the screen. When the
message "Are you sure to update BIOS?" appears, press <Enter> to begin the BIOS update. The monitor will
display the update process.
• Do not turn off or restart the system when the system is reading/updating the BIOS.
• Do not remove the floppy disk, USB flash drive, or hard drive when the system is updat-
ing the BIOS.
Step 3:
When the update process is complete, press any key to return to the main menu.
Q-Flash Utility v2.15
Flash Type/Size................................. MXIC 25L8005/8006 1M
- 59 - Unique Features
Step 4:
Press <Esc> and then <Enter> to exit Q-Flash and reboot the system. As the system boots, you should see
the new BIOS version is present on the POST screen.
Step 5:
During the POST, press <Delete> to enter BIOS Setup. Select Load Optimized Defaults and press <Enter>
to load BIOS defaults. System will re-detect all peripheral devices after a BIOS update, so we recommend
that you reload BIOS defaults.
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Step 6:
Select Save & Exit Setup and then press <Y> to save settings to CMOS and exit BIOS Setup. The proce-
dure is complete after the system restarts.
Unique Features - 60 -
4-2-2 Updating the BIOS with the @BIOS Utility
B. Using @BIOS
- 61 - Unique Features
4-3 EasyTune 6
GIGABYTE's EasyTune 6 is a simple and easy-to-use interface that allows users to fine-tune their system
settings or do overclock/overvoltage in Windows environment. The user-friendly EasyTune 6 interface also
includes tabbed pages for CPU and memory information, letting users read their system-related information
without the need to install additional software.
Tabs Information
Tab Function
The CPU tab provides information on the installed CPU and motherboard.
The Memory tab provides information on the installed memory module(s). You can select memory
module on a specific slot to see its information.
The Tuner tab allows you to change system clock settings and voltages.
• Easy mode allows you to adjust the CPU FSB only.
• Advanced mode allows you to individually change system clock settings and voltages settings
using the sliders.
• Core Boost is configurable only in Advanced mode. With Core Boost (Note 1) enabled, you can unlock
hidden CPU cores or disable the cores that have been activated (Note 2).
• Save allows you to save the current settings to a new profile (.txt file).
• Load allows you to load previous settings from a profile.
After making changes in Easy mode/Advanced mode, be sure to click Set for these changes to take
effect or click Default to restore to default values.
The Graphics tab allows you to change the core clock and memory clock for your ATI or NVIDIA
graphics card.
The Smart tab allows you to specify a Smart Fan mode. Smart Fan Advanced mode allows the CPU fan
speed to be changed linearly based on the CPU temperature thresholds you set.
The HW Monitor tab allows you to monitor hardware temperature, voltage and fan speed and set
temperature/fan speed alarm. You can choose the alert sound from the buzzer or use your own sound
file (.wav file).
(Note 1) Restart the computer after enabling Core Boost for the settings to take effect.
(Note 2) The number of CPU cores that can be enabled/disabled depends on the CPU being used.
Available functions in EasyTune 6 may differ by motherboard model. Grayed-out area(s) indicates that the item is
not configurable or the function is not supported.
Incorrectly doing overclock/overvoltage may result in damage to the hardware components such as CPU, chipset,
and memory and reduce the useful life of these components. Before you do the overclock/overvoltage, make sure
that you fully know each function of EasyTune 6, or system instability or other unexpected results may occur.
Unique Features - 62 -
4-4 Auto Green
Auto Green is an easy-to-use tool that provides users with simple options to enable system power savings
via a Bluetooth cell phone. When the phone is out of the range of the computer's Bluetooth receiver, the sys-
tem will enter the specified power saving mode.
The Configuration dialog box:
First, you have to set your Bluetooth cell phone as a portable key. On the Auto Green
main menu, click Configure and then click Configure BT devices. Select the Blu-
etooth cell phone that you want to use as the portable key (Note 1). (If the screen doesn't
display your Bluetooth cell phone, click Refresh to let Auto Green re-detect the device.)
Before creating a Bluetooth cell phone key, make sure your motherboard
has a Bluetooth receiver and you have turned on the search and Bluetooth
functions on your phone.
Configuring the Bluetooth cell phone key:
After you select a cell phone, the Add Bluetooth Device Wizard as shown on the left
will appear. Enter a passkey (8~16 digits recommended) which will be used for pairing
with the cell phone. Then enter the same passkey on your cell phone.
(Note 1) If your cell phone has been configured as the Auto Green key, you'll not be able to use it to connect to other Blu-
etooth device(s) when Auto Green is enabled.
(Note 2) Whether the Bluetooth dongle is included depends on the motherboard models. Before installing the Bluetooth
dongle, be sure to turn off other Bluetooth receiver on your computer.
- 63 - Unique Features
Unique Features - 64 -
Chapter 5 Appendix
5-1 Configuring SATA Hard Drive(s)
(Note) Skip this step if you do not want to create RAID array on the SATA controller.
- 65 - Appendix
B. Configuring SATA controller mode in BIOS Setup
Make sure to configure the SATA controller mode correctly in system BIOS Setup.
Step 1:
Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test). Un-
der Integrated Peripherals, make sure NV SATA Controller is enabled. To enable RAID, go to the Serial-
ATA RAID Config (Figure 1).
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Integrated Peripherals
On-Chip IDE Channel [Enabled] Item Help
NV SATA Controller [Enabled] Menu Level
IDE Prefetch Mode [Enabled]
} Serial-ATA RAID Config [Press Enter]
Onboard Audio Function [Auto]
On-Chip MAC Lan [Auto]
Onboard LAN Boot ROM [Disabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
x ECP Mode Use DMA 3
USB Controllers [Enabled]
USB Legacy Function [Enabled]
USB Storage Function [Enabled]
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Figure 1
Set NV SATA RAID function to Enabled to enable RAID control for each SATA connector. Then set NV
SATA 1 Primary RAID and NV SATA 1 Secondary RAID to Enabled. (Figure 2).
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Serial-ATA RAID Config
NV SATA RAID function [Enabled] Item Help
NV SATA 1 Primary RAID [Enabled] Menu Level
NV SATA 1 Secondary RAID [Enabled]
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Figure 2
Step 2:
Save changes and exit BIOS Setup.
The BIOS Setup menus described in this section may differ from the exact settings for your moth-
erboard. The actual BIOS Setup menu options you will see shall depend on the motherboard you
have and the BIOS version.
Appendix - 66 -
C. Configuring RAID set in RAID BIOS
Enter the RAID BIOS setup utility to configure a RAID array. For a non-RAID configuration, please skip this
step and proceed to the installation of Windows operating system.
Step 1:
After the POST memory test begins and before the operating system boot begins, look for a message which
says "Press <F10> to enter RAID setup utility" (Figure 3). Hit the <F10> key to enter the NVIDIA RAID setup
utility.
MediaShield ROM BIOS 6.94
Copyright (C) 2006 NVIDIA Corp.
Figure 3
Step 2:
The Define a New Array screen is the first option screen when you enter the NVIDIA RAID setup utility (Figure
4). You can press the <Tab> key to move from field to field until the appropriate field is highlighted.
Step 3:
In the RAID Mode field, use the up or down arrow key to select a RAID mode. The supported RAID modes in-
clude Mirroring, Striping, Stripe Mirroring, RAID 5, and Spanning. The following procedure demonstrates how a
RAID 0 array (Striping) is created.
Step 4:
If RAID 0 (Striping) is selected, you can manually set the stripe block size. In the Striping Block field, use the
up or down arrow key to set the striping block size. Striping block size is given in kilobytes. We recommend
you leaving it at the default Optimal, which is 64 KB. The striping block size can be set from 4 KB to 128 KB.
[f] Del
[ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [hi] Select [ENTER] Popup
Figure 4
- 67 - Appendix
Step 5:
Next, select the hard drives which you wish to be included in the disk array. The Free Disks block displays
the information about the SATA hard drives that are available for use as RAID array drives. Press <Tab> to
move to the Free Disks block. Select the target hard drives using the up or down arrow key and use the right
arrow key to add the hard drives to the Array Disks block (Figure 5).
[f] Del
[ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [hi] Select [ENTER] Popup
Figure 5
Step 6:
After assigning the RAID drives, press <F7>. A message which says "Clear disk data?" appears (Figure 6).
Press <Y> to confirm or press <N> to cancel. (If the hard drives contain a previously created RAID array, you
need to press <Y> to clear the data in the hard drives.)
[f] Del
[ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [hi] Select [ENTER] Popup
Figure 6
Appendix - 68 -
After that, the Array List screen appears, displaying the RAID array that you have created (Figure 7).
[Ctrl-X] Exit [hi] Select [B] Set Boot [N] New Array [ENTER] Detail
Figure 7
To read more information about the RAID array, press <Enter> to enter the Array Detail screen (Figure 8),
which shows various information about the array, including the RAID mode, stripe block size, hard drive
model name, and hard drive capacity, etc.
Figure 8
To delete the array, press <D> in the Array Detail screen. When the "Delete this array?" message appears,
press <Y> to confirm or <N> to cancel. Press <Enter> to return to the Array List screen.
To exit the NVIDIA RAID setup utility, press <Esc> in the main menu or <Ctrl>+<X> in the Array List screen.
Now, you can proceed to the installation of the SATA controller driver and operating system.
- 69 - Appendix
5-1-2 Making a SATA RAID Driver Diskette
To successfully install operating system onto RAID drive(s), you need to install the SATA controller driver
during the OS installation. Without the driver, the hard drive may not be recognized during the Windows setup
process. First of all, copy the driver for the SATA controller from the motherboard driver disk to a floppy disk.
For installing Windows Vista, you also can copy the SATA controller driver from the motherboard driver disk to
a USB flash drive. See the instructions below about how to copy the driver in MS-DOS and Windows mode.
In MS-DOS mode:
Prepare a startup disk that has CD-ROM support and a blank formatted floppy disk.
Steps:
1: Boot from the startup disk.
2: Remove the startup disk and insert the prepared floppy disk and the motherboard driver disk (here we as-
sume that the drive letter for your optical drive is D:\).
3: At the A:\> prompt, type the following command. Press <Enter> after the command. Refer to Table 1 for
the SATA driver directories for different Windows operating systems and change the directory in the com-
mand according to the operating system to be installed. For example, to copy the RAID driver for Windows
XP 32-bit operating system, type:
A:\>copy d:\bootdrv\uda\winxp\sataraid\*.*
Figure 3
Figure 2
Appendix - 70 -
5-1-3 Installing the SATA RAID Driver and Operating System
With the SATA RAID driver diskette and correct BIOS settings, you are ready to install Windows Vista/XP onto
your hard drive(s). The followings are examples of Windows XP and Vista installation.
A. Installing Windows XP
Step 1:
Restart your system to boot from the Windows XP setup disk and press <F6> as soon as you see the mes-
sage "Press F6 if you need to install a 3rd party SCSI or RAID driver" (Figure 1). A screen will then appear
asking you to specify additional device.
Windows Setup
Figure 1
Step 2:
The screen displays two drivers, both of which need to be installed. First select NVIDIA RAID Driver and
press <Enter>. On the next screen, press <S> to return to the screen in Figure 2. Then select NVIDIA nForce
Storage Controller and press <Enter>. When both of the two drivers appear on the confirmation screen,
press <Enter> to continue the driver installation. When completed, proceed with the Windows XP installation.
Windows Setup
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
ENTER=Select F3=Exit
Figure 2
Step 3:
On the next screen, press <Enter> to continue the driver installation. After the driver installation, you can pro-
ceed with the Windows XP installation.
- 71 - Appendix
B. Installing Windows Vista
Step 1:
Restart your system to boot from the Windows Vista setup disk and perform standard OS installation steps.
When a screen similar to that below appears (RAID hard drive will not be detected at this stage), select Load
Driver (Figure 3).
Figure 3
Step 2:
Insert the motherboard driver disk (Method A) or the removable storage device such as USB flash drive that
contains the SATA RAID driver (Method B), then specify the location of the driver (Figure 4). Note: For users
using a SATA optical drive, be sure to copy the driver files from the motherboard driver disk to a USB flash
drive before installing Windows Vista (go to the BootDrv\UDA\WinVista folder and save the whole sataraid
folder to the USB flash drive). Then use Method B to load the driver.
Method A:
Insert the motherboard driver disk into your system and browse to the following directory:
BootDrv\UDA\WinVista\sataraid
For Windows Vista 64-bit, browse to BootDrv\UDA\WinVista64\sataraid.
Method B:
Insert the USB flash drive containing the driver files and browse to the sataraid folder.
Figure 4
Appendix - 72 -
Step 3:
When a screen as shown in Figure 5 appears, select NVIDIA nForce RAID Controller and click Next.
Figure 5
Step 4:
After the driver is loaded, the RAID drive will appear. Select the RAID drive and then click Next to continue
the OS installation (Figure 6).
Figure 6
- 73 - Appendix
Rebuilding an Array:
Rebuilding is the process of restoring data to a hard drive from other drives in the array. Rebuilding applies
only to fault-tolerant arrays such as RAID 1. To replace the old drive, make sure to use a new drive of equal
or greater capacity. The procedures below assume a new drive is added to replace a failed drive to rebuild a
RAID 1 array.
Launch the NVIDIA Control Panel from All Programs in the Start Menu.
Step 1: Step 2:
In NVIDIA Control Panel, click Rebuild array un- When the NVIDIA Rebuild Array Wizard ap-
der Storage in the Select a Task pane. pears, click Next.
Step 3: Step 4:
Select the array to rebuild and click Next. Select a drive to add to the array and click Next.
Step 5: Step 6:
Click Finish to start the rebuilding process. The rebuilding progress is displayed in the View
Storage Configuration sub-menu.
Appendix - 74 -
5-2 Configuring Audio Input and Output
5-2-1 Configuring 2/4/5.1/7.1-Channel Audio
The motherboard provides six audio jacks on the back
panel which support 2/4/5.1/7.1-channel (Note) audio.
The picture to the right shows the default audio jack Center/Subwoofer Line In
Speaker Out
assignments.
Rear Speaker Out Front Speaker Out
The integrated HD (High Definition) audio provides
Side Mic In
jack retasking capability that allows the user to change Speaker Out
• To install a microphone, connect your microphone to the Mic in jack and manually configure the
jack for microphone functionality.
• Audio signals will be present on both of the front and back panel audio connections simultane-
ously. If you want to mute the back panel audio (only supported when using an HD front panel
audio module), refer to instructions on the next page.
A. Configuring Speakers
(The following instructions use Windows Vista as the example operating system.)
Step 1:
After installing the audio driver, the HD Audio Manager
icon will appear in the notification area. Double-click
the icon to access the HD Audio Manager.
- 75 - Appendix
Step 2:
Connect an audio device to an audio jack. The The cur-
rent connected device is dialog box appears. Select the
device according to the type of device you connect. Then
click OK.
Step 3:
On the Speakers screen, click the Speaker Configura-
tion tab. In the Speaker Configuration list, select Stereo,
Quadraphonic, 5.1 Speaker, or 7.1 Speaker according to
the type of speaker configuration you wish to set up. Then
the speaker setup is completed.
Appendix - 76 -
5-2-2 Configuring S/PDIF In/Out
A. S/PDIF In
The S/PDIF In cable (optional) allows you to input digital audio signals to the computer for audio processing.
S/PDIF In Cable
Optical Coaxial
S/PDIF In S/PDIF In
Step 1: Step 2:
First, attach the connector at the end of the cable Secure the metal bracket to the chassis back
to the SPDIF_IN header on your motherboard. panel with a screw.
(Note) The actual locations of the SPDIF In and SPDIF Out connectors may differ by model.
- 77 - Appendix
B. S/PDIF Out
The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio
quality.
Connect a S/PDIF coaxial cable to an external decoder for transmitting the S/PDIF digital audio signals.
(Note) Enter the Digital Output(Optical) screen to configure further settings if you use the S/PDIF Out
connector(s) on the back panel for digital audio output or enter the Digital Output screen if you use
the internal S/PDIF Out connector (SPDIF_O) for digital audio output.
Appendix - 78 -
5-2-3 Configuring Microphone Recording
Step 1:
After installing the audio driver, the HD Audio Manager
icon will appear in the notification area. Double-click
the icon to access the HD Audio Manager.
Step 2:
Connect your microphone to the Mic in jack (pink) on
the back panel or the Mic in jack (pink) on the front
panel. Then configure the jack for microphone function-
ality.
Note: The microphone functions on the front panel and
back panel cannot be used at the same time.
Step 3:
Go to the Microphone screen. Do not mute the record-
ing volume, or you'll not be able to record the sound.
To hear the sound being recorded during the recording
process, do not mute the playback volume. It is recom-
mended that you set the volumes at a middle level.
- 79 - Appendix
Step 4:
To raise the recording and playback volume for the
microphone, click the Microphone Boost icon on
the right of the Recording Volume slider and set the
Microphone Boost level.
Step 5:
After completing the settings above, click Start, point
to All Programs, point to Accessories, and then click
Sound Recorder to begin the sound recording.
Step 2:
On the Recording tab, right-click on an empty space
and select Show Disabled Devices.
Appendix - 80 -
Step 3:
When the Stereo Mix item appears, right-click on this
item and select Enable. Then set it as the default de-
vice.
Step 4:
Now you can access the HD Audio Manager to config-
ure Stereo Mix and use Sound Recorder to record the
sound.
A. Recording Sound
1. Make sure you have connected the sound input device (e.g. microphone) to the computer.
2. To record the audio, click the Start Recording button .
3. To stop recording audio, click the Stop Recording button .
Be sure to save the recorded audio file upon completion.
- 81 - Appendix
5-3 Troubleshooting
Q: In the BIOS Setup program, why are some BIOS options missing?
A: Some advanced options are hidden in the BIOS Setup program. Press <Delete> to enter BIOS Setup during the POST. In
the Main Menu, press <Ctrl>+<F1> to show the advanced options.
Q: Why is the light of my keyboard/optical mouse still on after the computer shuts down?
A: Some motherboards provide a small amount of standby power after the computer shuts down and that's why the light is
still on.
Q: Why do I still get a weak sound even though I have turned my speaker to the maximum volume?
A: Make sure your speaker is equipped with an internal amplifier. If not, try a speaker with power/amplifier.
Q: Why cannot I install the onboard HD audio driver successfully? (For Windows XP only)
A: Step 1: First, make sure Service Pack 1 or Service Pack 2 has been installed (check in My Computer > Properties > Gen-
eral > System). If not, please update it from Microsoft's website. Then make sure the Microsoft UAA Bus Driver for
High Definition Audio has been installed successfully (check in My Computer > Properties > Hardware > Device
Manager > System Devices).
Step 2: Check if Audio Device on High Definition Audio Bus or Unknown device is present in Device Manager or
Sound, video, and game controllers. If yes, please disable this device. (If not, skip this step.)
Step 3: Then go back to My Computer > Properties > Hardware > Device Manager > System devices and right-click on
Microsoft UAA Bus Driver for High Definition Audio and select Disable and Uninstall.
Step 4: In Device Manager, right-click on the computer name and select Scan for hardware changes. When the Add
New Hardware Wizard appears, click Cancel. Then install the onboard HD audio driver from the motherboard
driver disk or download the audio driver from GIGABYTE's website to install.
For more details, go to the Support&Downloads\Motherboards\FAQ page on our website and search for "onboard HD
audio driver."
Appendix - 82 -
5-3-2 Troubleshooting Procedure
If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the
problem.
START
Turn off the power. Remove all peripherals, connecting cables, and
power cord etc.
Make sure the motherboard does not short-circuit with the chassis or Yes
Isolate the short circuit.
other metal objects.
Insert the graphics card. Connect the ATX main power cable and the
12V power cable. Turn on the power to start the computer.
Make sure the graphics card is securely seated in the
expansion slot and power connectors are firmly attached.
(Continued...)
- 83 - Appendix
A
Turn off the computer. Plug in the keyboard and mouse and restart
the computer.
END
If the procedure above is unable to solve your problem, contact the place of purchase or local
dealer for help. Or go to the Support&Downloads\Technical Service Zone page to submit your
question. Our customer service staff will reply you as soon as possible.
Appendix - 84 -
5-4 Regulatory Statements
Regulatory Notices
This document must not be copied without our written permission, and the contents there of must not be
imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted. We
believe that the information contained herein was accurate in all respects at the time of printing. GIGABYTE
cannot, however, assume any responsibility for errors or omissions in this text. Also note that the informa-
tion in this document is subject to change without notice and should not be construed as a commitment by
GIGABYTE.
- 85 - Appendix
Finally, we suggest that you practice other environmentally friendly actions by understanding and using the
energy-saving features of this product (where applicable), recycling the inner and outer packaging (including
shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly.
With your help, we can reduce the amount of natural resources needed to produce electrical and electronic
equipment, minimize the use of landfills for the disposal of "end of life" products, and generally improve our
quality of life by ensuring that potentially hazardous substances are not released into the environment and
are disposed of properly.
Appendix - 86 -
- 87 - Appendix
Appendix - 88 -
- 89 - Appendix
Appendix - 90 -
- 91 - Appendix
Appendix - 92 -
- 93 - Appendix
Appendix - 94 -
Contact Us
• GIGA-BYTE TECHNOLOGY CO., LTD. • NINGBO G.B.T. TECH. TRADING CO., LTD. - China
Address: No.6, Bau Chiang Road, Hsin-Tien, WEB address : http://www.gigabyte.cn
Taipei 231, Taiwan Shanghai
TEL: +886-2-8912-4000 TEL: +86-21-63410999
FAX: +886-2-8912-4003 FAX: +86-21-63410100
Tech. and Non-Tech. Support (Sales/Marketing) : Beijing
http://ggts.gigabyte.com.tw TEL: +86-10-62102838
WEB address (English): http://www.gigabyte.com FAX: +86-10-62102848
WEB address (Chinese): http://www.gigabyte.tw Wuhan
• G.B.T. INC. - U.S.A. TEL: +86-27-87851061
TEL: +1-626-854-9338 FAX: +86-27-87851330
FAX: +1-626-854-9339 GuangZhou
Tech. Support: TEL: +86-20-87540700
http://rma.gigabyte.us FAX: +86-20-87544306
Web address: http://www.gigabyte.us Chengdu
• G.B.T. INC (USA) - Mexico TEL: +86-28-85236930
Tel: +1-626-854-9338 x 215 (Soporte de habla hispano) FAX: +86-28-85256822
FAX: +1-626-854-9339 Xian
Correo: soporte@gigabyte-usa.com TEL: +86-29-85531943
Tech. Support: FAX: +86-29-85510930
http://rma.gigabyte.us Shenyang
Web address: http://latam.giga-byte.com TEL: +86-24-83992901
• Giga-Byte SINGAPORE PTE. LTD. - Singapore FAX: +86-24-83992909
WEB address : http://www.gigabyte.sg • GIGABYTE TECHNOLOGY (INDIA) LIMITED - India
• Thailand WEB address : http://www.gigabyte.in
WEB address : http://th.giga-byte.com • Saudi Arabia
• Vietnam WEB address : http://www.gigabyte.com.sa
WEB address : http://www.gigabyte.vn • Gigabyte Technology Pty. Ltd. - Australia
WEB address : http://www.gigabyte.com.au
- 95 - Appendix
• G.B.T. TECHNOLOGY TRADING GMBH - Germany • Hungary
WEB address : http://www.gigabyte.de WEB address : http://www.giga-byte.hu
• G.B.T. TECH. CO., LTD. - U.K. • Turkey
WEB address : http://www.giga-byte.co.uk WEB address : http://www.gigabyte.com.tr
• Giga-Byte Technology B.V. - The Netherlands • Russia
WEB address : http://www.giga-byte.nl WEB address : http://www.gigabyte.ru
• GIGABYTE TECHNOLOGY FRANCE - France • Poland
WEB address : http://www.gigabyte.fr WEB address : http://www.gigabyte.pl
• Sweden • Ukraine
WEB address : http://www.gigabyte.se WEB address : http://www.gigabyte.ua
• Italy • Romania
WEB address : http://www.giga-byte.it WEB address : http://www.gigabyte.com.ro
• Spain • Serbia
WEB address : http://www.giga-byte.es WEB address : http://www.gigabyte.co.rs
• Greece • Kazakhstan
WEB address : http://www.gigabyte.com.gr WEB address : http://www.gigabyte.kz
• Czech Republic You may go to the GIGABYTE website, select your language
WEB address : http://www.gigabyte.cz in the language list on the top right corner of the website.
Appendix - 96 -