Type Approval Certificate: Rittal GMBH & Co. KG
Type Approval Certificate: Rittal GMBH & Co. KG
Type Approval Certificate: Rittal GMBH & Co. KG
www.veristar.com
Requirements:
Bureau Veritas Rules for the Classification of Steel Ships
This certificate is issued to attest that Bureau Veritas Marine & Offshore did undertake the relevant approval procedures for the product identified
above which was found to comply with the relevant requirements mentioned above.
This certificate remains valid until the date stated above, unless cancelled or revoked, provided the conditions indicated in the subsequent page(s) are complied
with and the product remains satisfactory in service. This certificate will not be valid if the applicant makes any changes or modifications to the approved product,
which have not been notified to, and agreed in writing with Bureau Veritas Marine & Offshore. Should the specified regulations or standards be amended during
the validity of this certificate, the product(s) is/are to be re-approved prior to it/they being placed on board vessels to which the amended regulations or standards
apply. This certificate is issued within the scope of the General Conditions of Bureau Veritas Marine & Offshore available on the internet site www.veristar.com.
Any Person not a party to the contract pursuant to which this document is delivered may not assert a claim against Bureau Veritas Marine & Offshore for any
liability arising out of errors or omissions which may be contained in said document, or for errors of judgement, fault or negligence committed by personnel of the
Society or of its Agents in establishment or issuance of this document, and in connection with any activities for which it may provide.
Types/series Description
AE (AE-EMV, CP-AE, DK-AE) Single or double door, steel or stainless steel enclosure
EB Single door, steel or stainless steel enclosure
KL Terminal box, steel or stainless steel enclosure
KS Single or double door, plastic enclosures
Degree of protection: IP54, IP55 or IP66.
3. TEST REPORTS:
- IP testreports: 1206/13, dated 24.01.2014; 1331/14 dated 27.11.2014; 174/14 dated 13.01.2014;
1207/13 dated 24.01.2014
4. APPLICATION / LIMITATION:
4.1 - Bureau Veritas Rules and Regulations for the Classification of Steel Ships
4.2 - The cabinets are intended for installation in enclosed spaces.
5.4 - Equipment is to be supplied with its manual (s) for installation, use and maintenance.
6. MARKING OF PRODUCT:
- Maker's name or trademark
- Equipment type or model identification
- Date of manufacture and/or serial number
7. OTHERS:
7.1 - It is the responsibility of RITTAL GmbH & Co. KG - Germany to inform shipbuilders or their sub-contractors of the
proper methods of fitting, use and general maintenance of the approved equipment and the conditions of this approval.
7.2 - This certificate supersedes the Type Approval Certificate N° 04880/F0 BV issued on 12 Sep 2013 by the Society.