Solar Car Lift Jack: Synopsis
Solar Car Lift Jack: Synopsis
Solar Car Lift Jack: Synopsis
SYNOPSIS
This project work titled “SOLAR CAR LIFT JACK” has been conceived having
studied the difficulty in lifting the any type of light vehicles. Our survey in the regard in
several automobile garages, revealed the facts that mostly some difficult methods were
adopted in lifting the vehicles for reconditioning. The solar panel is used to charge the car
battery.
Now the project has mainly concentrated on this difficulty, and hence a suitable
device has been designed. Such that the vehicle can be lifted from the floor land without
application of any impact force. The fabrication part of it has been considered with
almost case for its simplicity and economy, such that this can be accommodated as one of
the essential tools on automobile garages.
INTRODUCTION
This device the solar car lift jack for automobile garages has been developed to
later the needs of small and medium automobile garages, who are normally man powered
with very minimum of skilled labours. In most of the garages the vehicles are lifted by
using screw jack. This needs high man power and skilled labours. In order to avoid all
such disadvantages. This, solar car lift jack has been designed in such a way that it can
be used to lift the vehicle very smoothly without any impact force. The operation is
made be simple that even an unskilled labour can handled, by just demonstrating the
working of the solar car lift jack once. The d.c motor is coupled with the screw jack by
spur gear mechanism. This is an era of automation where it is broadly defined as
replacement of manual effort by mechanical power in all degrees of automation. The
operation remains an essential part of the system although with changing demands on
physical input as the degree of mechanization is increased.
WORKING PRINCIPLE
The solar panel is used to charge the car battery. The lead-acid battery is used to
drive the D.C motor. The D.C motor shaft is connected to the spur gear. If the power is given to
the D.C motor, it will run so that the spur gear also runs to the slow speed of the D.C motor. The
screw jack and moves the piston upward, so that the vehicle lifts from ground. The vehicle is
lifted by using the lifting flat form in the top of the screw jack. The motor is drawn
supply from the battery. The lifting and uplifting is done by changing the battery supply
to the motor simply.
ADVANTAGES
1. The loaded light vehicles can be easily.
2. Checking and cleaning are easy, because of the main parts are screwed.
3. Handling is easy
4. No Manual power
5. Easy to Repair.
6. Replacement of parts are easy
DISADVANTAGES
Cost of the equipment is high when compared to ordinary hand jack.
Care must be taken for the handling the equipment such as proper
wiring connection, battery charging checkup, etc.
APPLICATIONS
1. It is very much useful in auto-garage. This solar car lift jack is used for lifting the
vehicles.
2. Thus it can be useful for the following types of vehicles in future;
Maruti, Ambassador, Fiat, Mahindra