Remove Flywheel Housing
Remove Flywheel Housing
Remove Flywheel Housing
Cerrar SIS
Pantalla anterior
Desarmado y Armado
D342 VEHICULAR ENGINE FOR D8K TRACTOR
Número de medio -SENR7010-01 Fecha de publicación -01/09/1977 Fecha de actualización -12/10/2001
Flywheel Housing
SMCS - 1157-11; 1157-12
start by:
a) remove engine
b) remove flywheel
2. Remove bolts (1) that hold the oil pan to the flywheel housing.
https://127.0.0.1/...isweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage=/sisweb/sisweb/techdoc/techdoc_print_page.jsp[30/11/2020 09:08:42]
D342 VEHICULAR ENGINE 76V00001-00504 (MACHINE)(UEG0890S - 00) - Sistemas y componentes
3. Remove clamps (5) that hold the oil tubes to the flywheel housing.
4. Remove six locks (8) and twelve bolts (7) that hold the baffle to the crankshaft. Remove baffle (6).
6. Remove two bolts (4). Remove ten nuts (3) and locks that hold the flywheel housing in position. Remove
flywheel housing (2). Weight of the flywheel housing is 250 lb. (113 kg).
1. Fasten a hoist to the flywheel housing (1) and put it in position on the cylinder block.
2. Install two bolts, ten locks and nuts that hold the flywheel housing in position.
3. Install the bolts that hold the oil pan to the flywheel housing.
4. Install the clamps that hold the oil tubes to the flywheel housing.
5. Install the baffle on the crankshaft. Install the bolts and locks that hold it.
end by:
b) install flywheel
c) install engine
Copyright 1993 - 2020 Caterpillar Inc. Mon Nov 30 09:08:00 EST 2020
Todos los derechos reservados.
https://127.0.0.1/...isweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage=/sisweb/sisweb/techdoc/techdoc_print_page.jsp[30/11/2020 09:08:42]
D342 VEHICULAR ENGINE 76V00001-00504 (MACHINE)(UEG0890S - 00) - Sistemas y componentes
https://127.0.0.1/...isweb/sisweb/productsearch/productheaderinfoframeset.jsp&calledpage=/sisweb/sisweb/techdoc/techdoc_print_page.jsp[30/11/2020 09:08:42]