Assignment VLAB EET MULTISIM ZC112
Assignment VLAB EET MULTISIM ZC112
Assignment VLAB EET MULTISIM ZC112
Q-1 Using Multisim software, implement the circuit given in Figure-1. Use voltmeter functionality in order to
measure the Node Volatges.
Figure 1
Q.2 Using Multisim software, implement the circuit given in Figure 2 of Full wave bridge rectifier. Use
oscilloscope functionality in order to display the wave form of ac source (input)voltage and output
voltage waveforms. The source is sinusoidal voltage 120V ( rms ) with 60Hz frequency. The load
resistance of 1kΩ. Measure the voltage across the load resistance R1
Figure 2
Birla Institute of Technology & Science, Pilani
Pilani | Dubai | Goa | Hyderabad
Q-3 Using Multisim software implement the circuit to measure line current and phase current in a three phase
AC system having a Delta connected alternator connected to a Delta connected load having a resistance of
R=10 Ω and L=2.5mH inductor in each phase. Use wattmeter functionality to measure the three phase
power. The phase voltage of the alternator is 440V(RMS) 50Hz.
Figure-3
Q-4 Using Multisim software, implement the circuit given in Figure 4. Use ammeter and voltmeter
functionality in order to display the value of the voltage across and current through the load resistor.
Frequency of the supply is 50Hz.
Figure 4
--------