IAPMO Research and Testing, Inc.

is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a
combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the
supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in
the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product
acceptance by Authorities Having Jurisdiction.

The most updated information on this Certificate of Listing is available online at pld.iapmo.org

Effective Date: October 2015 Void After: October 2016

Product: Wrought Copper Pressure Fittings File No. 4197

Issued To: Jungwoo Metal Ind. Co. Ltd

Nammyun Industrial Complex
371 Guam-ri Nammyun, Yangju-s1
Kyunggi-do, 482-872
,
Korea

Identification: Fittings shall be permanently and legibly marked with the manufacturer's name
or trademark in accordance with MSS SP-25 and the UPC® certification mark.
Marking on fittings less than size 1/2 or on any fitting where it damages
soldering surfaces is not required.

Characteristics: Wrought copper and wrought copper alloy solder joint pressure fittings
designed for use with copper water tube. To be installed in accordance with
the manufacturer's instructions, and the requirements of the latest edition
the Uniform Plumbing Code.

Products listed on this certificate have been tested by an IAPMO R&T

recognized laboratory. This recognition has been granted based upon the
laboratory's compliance to the applicable requirements of ISO/IEC 17025.

Products are in compliance with the following code(s):

Uniform Plumbing Code (UPC®)

This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material,
manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of
non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing.
Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc.
Any alteration of this certificate could be grounds for revocation of the listing.
 Page 2

Void After: October 2016

Product: Wrought Copper Pressure Fittings File No. 4197

Issued To: Jungwoo Metal Ind. Co. Ltd

International Plumbing Code (IPC®)

Products are in compliance with the following standard(s):

ASME B16.22-2013
 Page 3

Void After: October 2016

Product: Wrought Copper Pressure Fittings File No. 4197

Issued To: Jungwoo Metal Ind. Co. Ltd

MODELS:

90 ° Elbow C x C

Size Code Nominal Size

-0001 1/8 "
-0050 1/2"
-0100 3/4"
-0107 3/4" x 1/2"
-0150 1"

90° Street Elbow Ftg x C

Size Code Nominal Size

-0002 1/4"
-0050 1/2"

90° Long Turn Elbow C x C

Size Code Nominal Size

-0050 1/2"
-0100 3/4"
-0150 1"

45° Elbow C x C

Size Code Nominal Size

-0050 1/2"
-0100 3/4"

45° Street Elbow Ftg x C

Size Code Nominal Size

-0100 3/4"

Coupling w/stop C x C

Size Code Nominal Size

-0050 1/2"
-0100 3/4"
-0150 1"

Coupling no/stop C x C

Size Code Nominal Size

-0050 1/2"
 Page 4

Void After: October 2016

Product: Wrought Copper Pressure Fittings File No. 4197

Issued To: Jungwoo Metal Ind. Co. Ltd

Reducer Coupling w/stop C x C

Size Code Nominal Size

-0059 1/2" x 1/4"
-0107 3/4" x 1/2"
-1498 1" x 5/8"
----- 1" X 3/4"

CAP

Size Code Nominal Size

-0050 1/2"
-0100 3/4"
-0150 1"

Fitting Reducer Ftg x C

Size Code Nominal Size

-0059 1/2" x 1/4"
-0159 1" x 3/4"

Male Adapter C x M

Size Code Nominal Size

-0025 3/8"
-0050 1/2"
-0058 1/2" x 3/8"
-0100 3/4"
-0150 1"
-0215 1-1/4"
-0295 1-1/2"
-0390 2"

Female Adapters C x F

Size Code Nominal Size

-0025 3/8"
-0050 1/2"
-0057 1/2" x 3/4"
-0058 1/2" x 3/8"
-0100 3/4"
-0150 1"
-0215 1- 1/4
-0295 1-1/2"
 Page 5

Void After: October 2016

Product: Wrought Copper Pressure Fittings File No. 4197

Issued To: Jungwoo Metal Ind. Co. Ltd

-0390 2"

Tee C x C

Size Code Nominal Size

-0025 3/8"
-0050 1/2"
-0100 3/4"
-0117 3/4" x 3/4" x 1/2"
-0150 1"
-0171 1" x 3/4" x 1/2"
-0180 1" x 1" x 1/2"

Description Size
ADAPTER C*F(NPT) 1/4
ADAPTER C*F(NPT) 2-1/2
ADAPTER C*F(NPT) 3
ADAPTER C*F(NPT) 3/8X1/2
ADAPTER C*F(NPT) 1/2X1
ADAPTER C*F(NPT) 1/2X1/4
ADAPTER C*F(NPT) 5/8X1/2
ADAPTER C*F(NPT) 5/8X3/4
ADAPTER C*F(NPT) 3/4X1/2
ADAPTER C*F(NPT) 3/4X1
ADAPTER C*F(NPT) 1X1/2
ADAPTER C*F(NPT) 1X3/4
ADAPTER C*F(NPT) 1X1-1/4
ADAPTER C*F(NPT) 1-1/4X3/4
ADAPTER C*F(NPT) 1-1/4X1
ADAPTER C*F(NPT) 1-1/4X1-1/2
ADAPTER C*F(NPT) 1-1/2X1-1/4
ADAPTER C*F(NPT) 1-1/2X2
ADAPTER C*F(NPT) 2X1-1/2
ADAPTER C*M(NPT) 1/4
ADAPTER C*M(NPT) 2-1/2
ADAPTER C*M(NPT) 3
ADAPTER C*M(NPT) 4
ADAPTER C*M(NPT) 1/4X1/2
ADAPTER C*M(NPT) 3/8X1/2
ADAPTER C*M(NPT) 1/2X3/4
ADAPTER C*M(NPT) 1/2X1
ADAPTER C*M(NPT) 1/2X1/4
ADAPTER C*M(NPT) 5/8X1/2
ADAPTER C*M(NPT) 5/8X3/4
ADAPTER C*M(NPT) 3/4X1/2
ADAPTER C*M(NPT) 3/4X1
ADAPTER C*M(NPT) 1X1/2
ADAPTER C*M(NPT) 1X3/4
 Page 6

Void After: October 2016

Product: Wrought Copper Pressure Fittings File No. 4197

Issued To: Jungwoo Metal Ind. Co. Ltd

ADAPTER C*M(NPT) 1X1-1/4

ADAPTER C*M(NPT) 1X1-1/2
ADAPTER C*M(NPT) 1-1/4X3/4
ADAPTER C*M(NPT) 1-1/4X1
ADAPTER C*M(NPT) 1-1/4X1-1/2
ADAPTER C*M(NPT) 1-1/2X1
ADAPTER C*M(NPT) 1-1/2X1-1/4
ADAPTER C*M(NPT) 1-1/2X2
ADAPTER C*M(NPT) 2X1-1/4
ADAPTER C*M(NPT) 2X1-1/2
ADAPTER C*M(NPT) 2-1/2X2
ADAPTER FTG*F(NPT) 1/2
ADAPTER FTG*F(NPT) 3/4
ADAPTER FTG*F(NPT) 1
ADAPTER FTG*F(NPT) 1-1/4
ADAPTER FTG*F(NPT) 1-1/2
ADAPTER FTG*F(NPT) 2
ADAPTER FTG*F(NPT) 1/2X3/4
ADAPTER FTG*M(NPT) 1/2
ADAPTER FTG*M(NPT) 3/4
ADAPTER FTG*M(NPT) 1
ADAPTER FTG*M(NPT) 1-1/4
ADAPTER FTG*M(NPT) 1-1/2
ADAPTER FTG*M(NPT) 2
ADAPTER FTG*M(NPT) 1/2X3/4
BUSHING FTG*C 3/4X3/8
BUSHING FTG*C 3/4X1/2
BUSHING FTG*C 3/4X5/8
BUSHING FTG*C 1X1/2
BUSHING FTG*C 1X3/4
BUSHING FTG*C 1-1/4X3/4
BUSHING FTG*C 1-1/4X1
BUSHING FTG*C 2X1-1/2
BUSHING FTG*F 3/4X1/4
CAP 3/8
CAP 5/8
CAP 1-1/4
CAP 1-1/2
CAP 2
CAP 2-1/2
CAP 3
CAP 4
90deg Elbow, Short Radius C*C 1/4
90deg Elbow, Short Radius C*C 3/8
90deg Elbow, Short Radius C*C 5/8
90deg Elbow, Short Radius C*C 1-1/4
90deg Elbow, Short Radius C*C 1-1/2
90deg Elbow, Short Radius C*C 2
 Page 7

Void After: October 2016

Product: Wrought Copper Pressure Fittings File No. 4197

Issued To: Jungwoo Metal Ind. Co. Ltd

90deg Elbow, Short Radius C*C 2-1/2

90deg Elbow, Short Radius C*C 3
90deg Elbow, Short Radius C*C 3-1/2
90deg Elbow, Short Radius C*C 4
90deg Elbow, Short Radius C*C 5
90deg Elbow, Short Radius C*C 6
90deg Elbow, Short Radius C*C 8
90deg Elbow, Short Radius C*C 3/8X1/4
90deg Elbow, Short Radius C*C 1/2X3/8
90deg Elbow, Short Radius C*C 1X1/2
90deg Elbow, Short Radius C*C 1X3/4
90deg Elbow, Short Radius C*C 1-1/4X3/4
90deg Elbow, Short Radius C*C 1-1/4X1
90deg Elbow, Short Radius C*C 1-1/2X1-1/4
90deg Elbow, Short Radius C*C 2X1-1/2
90deg Elbow, Short Radius C*C 3/4X1/2
90deg Elbow, Short Radius C*C 1X1/2
90deg Elbow, Short Radius C*C 1X3/4
90deg Elbow, Short Radius FTG*C 3/8
90deg Elbow, Short Radius FTG*C 5/8
90deg Elbow, Short Radius FTG*C 3/4
90deg Elbow, Short Radius FTG*C 1
90deg Elbow, Short Radius FTG*C 1-1/4
90deg Elbow, Short Radius FTG*C 1-1/2
90deg Elbow, Short Radius FTG*C 2
90deg Elbow, Short Radius FTG*C 2-1/2
90deg Elbow, Short Radius FTG*C 3
90deg Elbow, Short Radius FTG*C 4
45deg deg deg Elbow, Short Radius, Short Radius C*C 1/4
45deg deg deg Elbow, Short Radius, Short Radius C*C 3/8
45deg deg deg Elbow, Short Radius, Short Radius C*C 5/8
45deg deg deg Elbow, Short Radius, Short Radius C*C 1
45deg deg deg Elbow, Short Radius, Short Radius C*C 1-1/4
45deg deg deg Elbow, Short Radius, Short Radius C*C 1-1/2
45deg deg deg Elbow, Short Radius, Short Radius C*C 2
45deg deg deg Elbow, Short Radius, Short Radius C*C 2-1/2
45deg deg deg Elbow, Short Radius, Short Radius C*C 3
45deg deg deg Elbow, Short Radius, Short Radius C*C 4
45deg deg deg Elbow, Short Radius, Short Radius C*C 5
45deg deg deg Elbow, Short Radius, Short Radius C*C 6
45deg deg deg Elbow, Short Radius, Short Radius FTG*C 1/4
45deg deg deg Elbow, Short Radius, Short Radius FTG*C 1/2
45deg deg deg Elbow, Short Radius, Short Radius FTG*C 5/8
45deg deg deg Elbow, Short Radius, Short Radius FTG*C 1
45deg deg deg Elbow, Short Radius, Short Radius FTG*C 1-1/4
45deg deg deg Elbow, Short Radius, Short Radius FTG*C 1-1/2
45deg deg deg Elbow, Short Radius, Short Radius FTG*C 2
45deg deg deg Elbow, Short Radius, Short Radius FTG*C 2-1/2
 Page 8

Void After: October 2016

Product: Wrought Copper Pressure Fittings File No. 4197

Issued To: Jungwoo Metal Ind. Co. Ltd

45deg deg deg Elbow, Short Radius, Short Radius FTG*C 3

45deg deg deg Elbow, Short Radius, Short Radius FTG*C 4
45deg deg deg Elbow, Short Radius, Short Radius FTG*C 6
deg Elbow, Long Radius C*C 1/4
deg Elbow, Long Radius C*C 3/8
deg Elbow, Long Radius C*C 5/8
deg Elbow, Long Radius C*C 1-1/4
deg Elbow, Long Radius C*C 1-1/2
deg Elbow, Long Radius C*C 2
deg Elbow, Long Radius C*C 2-1/2
deg Elbow, Long Radius C*C 3
deg Elbow, Long Radius C*C 4
deg Elbow, Long Radius FTG*C 1/4
deg Elbow, Long Radius FTG*C 3/8
deg Elbow, Long Radius FTG*C 1/2
deg Elbow, Long Radius FTG*C 5/8
deg Elbow, Long Radius FTG*C 3/4
deg Elbow, Long Radius FTG*C 1
deg Elbow, Long Radius FTG*C 1-1/4
deg Elbow, Long Radius FTG*C 1-1/2
deg Elbow, Long Radius FTG*C 2
deg Elbow, Long Radius FTG*C 2-1/2
deg Elbow, Long Radius FTG*C 3
(Suction Line) P-Trap 1/2
(Suction Line) P-Trap 5/8
(Suction Line) P-Trap 3/4
(Suction Line) P-Trap 1
(Suction Line) Long P-Trap 3/4
REDUCER C*C 3/8X1/4
REDUCER C*C 1/2X3/8
REDUCER C*C 5/8X1/4
REDUCER C*C 5/8X3/8
REDUCER C*C 5/8X1/2
REDUCER C*C 3/4X1/4
REDUCER C*C 3/4X3/8
REDUCER C*C 3/4X5/8
REDUCER C*C 1X3/8
REDUCER C*C 1X1/2
REDUCER C*C 1-1/4X1/2
REDUCER C*C 1-1/4X5/8
REDUCER C*C 1-1/4X3/4
REDUCER C*C 1-1/4X1
REDUCER C*C 1-1/2X1/2
REDUCER C*C 1-1/2X5/8
REDUCER C*C 1-1/2X3/4
REDUCER C*C 1-1/2X1
REDUCER C*C 1-1/2X1-1/4
REDUCER C*C 2X1/2
 Page 9

Void After: October 2016

Product: Wrought Copper Pressure Fittings File No. 4197

Issued To: Jungwoo Metal Ind. Co. Ltd

REDUCER C*C 2X3/4

REDUCER C*C 2X1
REDUCER C*C 2X1-1/4
REDUCER C*C 2X1-1/2
REDUCER C*C 2-1/2X3/4
REDUCER C*C 2-1/2X1
REDUCER C*C 2-1/2X1-1/4
REDUCER C*C 2-1/2X1-1/2
REDUCER C*C 2-1/2X2
REDUCER C*C 3X1
REDUCER C*C 3X1-1/4
REDUCER C*C 3X1-1/2
REDUCER C*C 3X2
REDUCER C*C 3X2-1/2
REDUCER C*C 4X1-1/2
REDUCER C*C 4X2
REDUCER C*C 4X2-1/2
REDUCER C*C 4X3
REDUCER C*C 5X4
REDUCER C*C 6X3
REDUCER C*C 6X4
REDUCER FTG*C 3/8X1/4
REDUCER FTG*C 1/2X3/8
REDUCER FTG*C 5/8X3/8
REDUCER FTG*C 5/8X1/2
REDUCER FTG*C 3/4X1/4
REDUCER FTG*C 3/4X3/8
REDUCER FTG*C 3/4X1/2
REDUCER FTG*C 3/4X5/8
REDUCER FTG*C 1X3/8
REDUCER FTG*C 1X1/2
REDUCER FTG*C 1-1/4X1/2
REDUCER FTG*C 1-1/4X3/4
REDUCER FTG*C 1-1/4X1
REDUCER FTG*C 1-1/2X1/2
REDUCER FTG*C 1-1/2X3/4
REDUCER FTG*C 1-1/2X1
REDUCER FTG*C 1-1/2X1-1/4
REDUCER FTG*C 2X1/2
REDUCER FTG*C 2X3/4
REDUCER FTG*C 2X1
REDUCER FTG*C 2X1-1/4
REDUCER FTG*C 2X1-1/2
REDUCER FTG*C 2-1/2X1
REDUCER FTG*C 2-1/2X1-1/4
REDUCER FTG*C 2-1/2X1-1/2
REDUCER FTG*C 2-1/2X2
REDUCER FTG*C 3X1
 Page 10

Void After: October 2016

Product: Wrought Copper Pressure Fittings File No. 4197

Issued To: Jungwoo Metal Ind. Co. Ltd

REDUCER FTG*C 3X1-1/4

REDUCER FTG*C 3X1-1/2
REDUCER FTG*C 3X2
REDUCER FTG*C 3X2-1/2
REDUCER FTG*C 4X2
REDUCER FTG*C 4X2-1/2
REDUCER FTG*C 4X3
REDUCER FTG*C 5X4
REDUCER FTG*C 6X3
REDUCER FTG*C 6X4
Roll stop Cupling 1/4
Roll stop Cupling 3/8
Roll stop Cupling 5/8
Roll stop Cupling 1-1/4
Roll stop Cupling 1-1/2
Roll stop Cupling 2
Roll stop Cupling 2-1/2
Roll stop Cupling 3
Roll stop Cupling 3-1/2
Roll stop Cupling 4
Roll stop Cupling 5
Roll stop Cupling 6
Roll stop Cupling 8
Staked stop Cupling 1/4
Staked stop Cupling 3/8
Staked stop Cupling 1/2
Staked stop Cupling 5/8
Staked stop Cupling 3/4
Staked stop Cupling 1
Staked stop Cupling 1-1/4
Staked stop Cupling 1-1/2
Staked stop Cupling 2
Staked stop Cupling 2-1/2
Staked stop Cupling 3
Staked stop Cupling 4
Staked stop Cupling 6
No stop Cupling 1/4
No stop Cupling 3/8
No stop Cupling 5/8
No stop Cupling 3/4
No stop Cupling 1
No stop Cupling 1-1/4
No stop Cupling 1-1/2
No stop Cupling 2
No stop Cupling 2-1/2
No stop Cupling 3
No stop Cupling 4
Tee 1/4
 Page 11

Void After: October 2016

Product: Wrought Copper Pressure Fittings File No. 4197

Issued To: Jungwoo Metal Ind. Co. Ltd

Tee 5/8
Tee 1-1/4
Tee 1-1/2
Tee 2
Tee 2-1/2
Tee 3
Tee 4
Tee 5
Tee 6
Tee 8
Tee 3/8X3/8X1/4
Tee 1/2X1/2X1/4
Tee 1/2X1/2X3/8
Tee 1/2X1/2X3/4
Tee 1/2X1/2X1
Tee 5/8X5/8X1/4
Tee 5/8X5/8X3/8
Tee 5/8X5/8X1/2
Tee 3/4X3/4X1/4
Tee 3/4X3/4X3/8
Tee 3/4X3/4X5/8
Tee 3/4X3/4X1
Tee 1X1X3/8
Tee 1X1X3/4
Tee 1X1X1-1/4
Tee 1X1X1-1/2
Tee 1-1/4X1-1/4X3/8
Tee 1-1/4X1-1/4X1/2
Tee 1-1/4X1-1/4X5/8
Tee 1-1/4X1-1/4X3/4
Tee 1-1/4X1-1/4X1
Tee 1-1/4X1-1/4X1-1/2
Tee 1-1/2X1-1/2X1/2
Tee 1-1/2X1-1/2X3/4
Tee 1-1/2X1-1/2X1
Tee 1-1/2X1-1/2X1-1/4
Tee 1-1/2X1-1/2X2
Tee 2X2X1/2
Tee 2X2X3/4
Tee 2X2X1
Tee 2X2X1-1/4
Tee 2X2X1-1/2
Tee 2X2X2-1/2
Tee 2-1/2X2-1/2X1/2
Tee 2-1/2X2-1/2X3/4
Tee 2-1/2X2-1/2X1
Tee 2-1/2X2-1/2X1-1/4
Tee 2-1/2X2-1/2X1-1/2
 Page 12

Void After: October 2016

Product: Wrought Copper Pressure Fittings File No. 4197

Issued To: Jungwoo Metal Ind. Co. Ltd

Tee 2-1/2X2-1/2X2
Tee 2-1/2X2-1/2X3
Tee 3X3X1/2
Tee 3X3X3/4
Tee 3X3X1
Tee 3X3X1-1/4
Tee 3X3X1-1/2
Tee 3X3X2
Tee 3X3X2-1/2
Tee 4X4X1/2
Tee 4X4X3/4
Tee 4X4X1
Tee 4X4X1-1/4
Tee 4X4X1-1/2
Tee 4X4X2
Tee 4X4X2-1/2
Tee 4X4X3
Tee 5X5X4
Tee 6X6X2
Tee 6X6X3
Tee 6X6X4
Tee 3/8X1/4X1/4
Tee 1/2X1/4X1/2
Tee 3/4X1/2X1/2
Tee 3/4X1/2X3/4
Tee 1X1/2X1/2
Tee 1X1/2X3/4
Tee 1X1/2X1
Tee 1X3/4X3/4
Tee 1X3/4X1
Tee 1-1/4X1/2X1
Tee 1-1/4X1/2X1-1/4
Tee 1-1/4X3/4X1/2
Tee 1-1/4X3/4X3/4
Tee 1-1/4X3/4X1
Tee 1-1/4X3/4X1-1/4
Tee 1-1/4X1X1/2
Tee 1-1/4X1X3/4
Tee 1-1/4X1X1
Tee 1-1/4X1X1-1/4
Tee 1-1/2X1/2X1-1/2
Tee 1-1/2X3/4X1/2
Tee 1-1/2X3/4X3/4
Tee 1-1/2X3/4X1
Tee 1-1/2X3/4X1-1/4
Tee 1-1/2X3/4X1-1/2
Tee 1-1/2X1X1/2
Tee 1-1/2X1X3/4
 Page 13

Void After: October 2016

Product: Wrought Copper Pressure Fittings File No. 4197

Issued To: Jungwoo Metal Ind. Co. Ltd

Tee 1-1/2X1X1
Tee 1-1/2X1X1-1/4
Tee 1-1/2X1X1-1/2
Tee 1-1/2X1-1/4X1/2
Tee 1-1/2X1-1/4X3/4
Tee 1-1/2X1-1/4X1
Tee 1-1/2X1-1/4X1-1/4
Tee 1-1/2X1-1/4X1-1/2
Tee 2X1/2X2
Tee 2X3/4X2
Tee 2X1X1
Tee 2X1X2
Tee 2X1-1/4X3/4
Tee 2X1-1/4X1
Tee 2X1-1/4X1-1/4
Tee 2X1-1/4X1-1/2
Tee 2X1-1/4X2
Tee 2X1-1/2X1/2
Tee 2X1-1/2X3/4
Tee 2X1-1/2X1
Tee 2X1-1/2X1-1/4
Tee 2X1-1/2X1-1/2
Tee 2X1-1/2X2
Tee 2-1/2X3/4X2-1/2
Tee 2-1/2X1X2
Tee 2-1/2X1X2-1/2
Tee 2-1/2X1-1/4X2-1/2
Tee 2-1/2X1-1/2X1-1/2
Tee 2-1/2X1-1/2X2
Tee 2-1/2X1-1/2X2-1/2
Tee 2-1/2X2X3/4
Tee 2-1/2X2X1
Tee 2-1/2X2X1-1/4
Tee 2-1/2X2X1-1/2
Tee 2-1/2X2X2
Tee 2-1/2X2X2-1/2
Tee 3X3/4X3
Tee 3X1X3
Tee 3X1-1/4X3
Tee 3X1-1/2X3
Tee 3X2X2
Tee 3X2X2-1/2
Tee 3X2X3
Tee 3X2-1/2X1-1/2
Tee 3X2-1/2X2
Tee 3X2-1/2X2-1/2
Tee 3X2-1/2X3
Tee 4X2X4
 Page 14

Void After: October 2016

Product: Wrought Copper Pressure Fittings File No. 4197

Issued To: Jungwoo Metal Ind. Co. Ltd

Tee 4X3X2
Tee 4X3X2-1/2
Tee 4X3X3
Tee 4X3X4
Return Bend 3/4
Return Bend 1
 Page 15

Void After: October 2016

Product: Wrought Copper Pressure Fittings File No. 4197

Issued To: Jungwoo Metal Ind. Co. Ltd

ADDITIONAL COMPANY INFO:

JMF Company

Model No. Description

2523508089800 1/2" C x 1/2" C Wrot Pressure Close Rough 90 Elbow
2523512129800 3/4" C x 3/4" C Wrot Pressure Close Rough 90 Elbow
2523512089800 3/4" C x 1/2" C Wrot Pressure Close Rough 90 Elbow
2523516169800 1" C x 1" C Wrot Pressure Close Rough 90 Elbow

2525404049800 1/4" Ftg x 1/4" C Wrot Pressure 90 Street Elbow

2525408089800 1/2" Ftg x 1/2" C Wrot Pressure 90 Street Elbow

2524208089800 1/2" C x 1/2" C Wrot Pressure Long Radius 90 Elbow

2524212129800 3/4" C x 3/4" C Wrot Pressure Long Radius 90 Elbow
2524216169800 1" C x 1" C Wrot Pressure Long Radius 90 Elbow

2529008089800 1/2" C x 1/2" C Wrot Pressure 45 Elbow

2529012129800 3/4" C x 3/4" C Wrot Pressure 45 Elbow

2529512129800 3/4" Ftg x 3/4" C Wrot Pressure 45 Street Elbow

2516508089800 1/2" C x 1/2" C Wrot Pressure Coupling

2516512129800 3/4" C x 3/4" C Wrot Pressure Coupling
2516516169800 1" C x 1" C Wrot Pressure Coupling

2517208089800 1/2" C x 1/2" C Wrot Pressure Slip Coupling without stop

2156508049800 1/2" C x 1/2" C Wrot Pressure Coupling

2516512089800 3/4" C x 3/4" C Wrot Pressure Coupling
2516516109800 1" C x 1" C Wrot Pressure Coupling

2515408989800 1/2" C Wrot Pressure Cap

2515412989800 3/4" C Wrot Pressure Cap
2515416989800 1" C Wrot Pressure Cap

2541008049800 1/2" Ftg x 1/4" C Fitting Reducer

2541016129800 1" Ftg x 3/4" C Fitting Reducer

2510106069800 3/8" C x 3/8" Mip Wrot Pressure Adapter

2510108089800 1/2" C x 1/2" Mip Wrot Pressure Adapter
2510108069800 1/2" C x 3/8" Mip Wrot Pressure Adapter
2510112129800 3/4" C x 3/4" Mip Wrot Pressure Adapter
2510116169800 1" C x 1" Mip Wrot Pressure Adapter
2510120209800 1 1/4" C x 1 1/4" Mip Wrot Pressure Adapter