Nothing Special   »   [go: up one dir, main page]

S Band Magnetron Model No. M1302L/M5020: Released

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Date

Jan. 15, 2019 Released

S band Magnetron

Model No. M1302L/M5020

Copyright© 2019
New Japan Radio Co., Ltd.
Microwave Division

-Notice of Proprietary Information-


This document and its contents are proprietary to New Japan Radio Co., Ltd.
This publication and its contents may not be reproduced or distributed for any other purpose
without the written permission of New Japan Radio Co., Ltd.
Those specifications listed in this document are subject to change at any time, without notice.

Title:
New Japan Radio Co., Ltd. Datasheet of M1302L/M5020
Microwave Division Reference No.: Rev.: Sheet:
DS-M1302L/M5020 03E 1/4
M1302L/M5020

■ GENERAL DESCRIPTION
M1302L/M5020 is designed for the magnetron of s band
radar system.
The frequency range is fixed <3040 - 3060MHz> and the
peak output power is 30kW.

■ ELECTRICAL CHARACTERISTICS

PARAMETERS MINIMUM TYPICAL MAXIMUM UNITS


Heater voltage (note 1) 5.7 6.3 6.9 V
Preheat time 180 - - s
Peak anode voltage (note 2) 7.5 8.0 8.5 kV
Peak output power (note 2) 25 - - kW
Frequency (note 2) 3040 - 3060 MHz

■ ABSOLUTE MAXIMUM RATINGS


These ratings cannot necessarily be used simultaneously and no individual ratings should be
exceeded.

PARAMETERS MINIMUM MAXIMUM UNITS


Peak anode current 6.0 12.0 A
Peak anode power input - 100 kW
Duty cycle - 0.001 -
Pulse duration - 1.0 μs
Rate of rise of voltage pulse - 130 kV/μs
Anode temperature - 120 ℃
VSWR at the output coupler - 1.5 : 1 -

*Above Specifications are subject to change without notice.


Reference No.: Rev.: Sheet:
DS-M1302L/M5020 03E 2/4
M1302L/M5020

Notes
1. Measured with heater voltage of 6.3V and no anode input power, the heater current
limits are 1.1A minimum, 1.4A maximum.
For average pulse input powers greater than 25 watts, the heater voltage must be reduced
within 3 seconds after the application of high voltage according to the following schedule:
Meat input power (W) Heater Voltage (V)
Less than 25 ·························· 6.3
25 to 62 ································ 5.3
62 to 100 ······························ 4.5
2. Measured at peak anode current 8.0A.

*Above Specifications are subject to change without notice.


Reference No.: Rev.: Sheet:
DS-M1302L/M5020 03E 3/4
M1302L/M5020

■ OUTLINE

*Above Specifications are subject to change without notice.


Reference No.: Rev.: Sheet:
DS-M1302L/M5020 03E 4/4

You might also like