Setup Guide DebutCarbon EVO Rainier PDF
Setup Guide DebutCarbon EVO Rainier PDF
Setup Guide DebutCarbon EVO Rainier PDF
Setup Guide
Getting started:
• complete manual:
www.project-audio.com/en/product/debut-carbon-evo
1 Unpack all items from accessory bag. 2 Remove dust cover carton from the box. 3 Lift the wrapped turntable out of the box.
4 Carefully remove the protection covering. 5 Unpack the counterweight. 6 Unpack the power supply. 7 Unpack the platter.
Tonearm is fragile!
Large pulley for round belt (78 RPM) STOPS THE MOTOR
Place the tonearm between platter Balance the tonearm so it stays level by Turn the front dial of the counterweight
16 Put a record on the platter. 17 and armrest. 18 turning the counterweight forwards and 19 (not the whole weight) so the ‘0’ is in line
backwards on the rod. with marker at the back of the tonearm.
0°
Need help?
Feel free to contact us. We have experienced partners
all over the world. Find your dealer here:
www.project-audio.com/en/find-a-dealer/
Possible Setup:
Pro-Ject Speaker Box 5 S2 (bookshelf speaker)
and Pro-Ject MaiA S2 (stereo integrated amplifier).
Service A Pro-Ject Audio Systems warranty relates to claims of defects in materials and/or workmanship at the time of purchase. It does not cover:
Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact your dealer for further • Deterioration of component parts, the nature of which is to become worn or depleted with use, such as batteries and headphone ear pads,
advice. Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country. drive belts and cartridges.
Warranty repairs will only be affected if the unit is returned correctly packaged. For this reason we recommend keeping the original packaging. • Damages caused by incorrect installation, connection or packing.
Never return a record player without making sure that is it safely disassembled and correctly packaged in the original packaging according to the • Damages caused by any use other than the correct use described in the user manual, negligence, modifications, or use of parts that are not
diagrams on the last page of this user guide. Please remove these parts and pack them separately: lid, counterweight, anti-skating weight and belt. made or authorized by Pro-Ject Audio Systems.
Fit the cartridge protection cap and the transport lock for the tonearm tube, prior to carefully packaging the record player. • Damages caused by faulty or unsuitable ancillary equipment.
• Damages caused by accidents, lightning, water, fire heat, war, public disturbances or any other cause beyond the reasonable control of
Warranty Pro-Ject Audio Systems and its appointed distributors.
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use and/or by transportation without the • Products where the serial number has been altered, deleted, removed or made illegible.
original packaging. Modification or change to any part of the product by unauthorized persons, release the manufacturer from any liability over and • Repairs or modifications that have been executed by an unauthorized person.
above the lawful rights of the customer.
Commercial Use
Warranty: Terms and Conditions Faults caused due to using domestic products in commercial environments or on commercial scales are not covered by warranty. This turntable is
• A warranty is valid only for products purchased from an authorized Pro-Ject Audio Systems retailer or dealer. intended for domestic use only. Using them for business applications are done so at your own risk.
• This warranty offer is limited to the repair of the equipment (which could be a repair or replacement at our discretion, neither of which affects
your original warranty). Pro-Ject Audio Systems is a Registered Trademark of H. Lichtenegger.
• Neither transportation or any other costs, nor any risk for removal, transportation and installation of products is covered by this warranty.
• A warranty is only valid for the original owner. It is not transferable. This guide was produced by: Pro-Ject Audio Systems
• To validate your warranty, you will need to provide the original sales invoice or other proof of ownership and date of purchase. Copyright © 2020. All rights reserved.
• Warranty must be claimed within two years of purchase from an authorized dealer. After this period of time, the warranty will expire.
• The legal warranty obligation exists in addition to this warranty and is not limited by this warranty. The information was correct at the time of going to press. The manufacturer reserves the right to make changes to the technical specification wit-
hout prior notice as deemed necessary to uphold the ongoing process of technical development.