Product data sheet RMPT70BD

Characteristics temperature transmitter - 0..500 °C/32..932 °F -

Main
Range of product Zelio Analog
Product or component Converter for Universal Pt100 probes
type
Analogue input type Temperature probe 0...500 °C/32...932 °F Pt 100 2, 3
or 4 wires
Analogue output type Current 0...20 mA <= 500 Ohm
Current 4...20 mA <= 500 Ohm
Voltage 0...10 V >= 100 kOhm

It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Complementary
Protection type Reverse polarity protection on output
Overvoltage protection on output (+/- 30 V)
Reverse polarity protection on power supply
Short-circuit protection on output
Abnormal analogue output voltage -15...-11 V when no input or input wire broken

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
11...15 V when no input or input wire broken

This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
Abnormal analogue output current -30…0 MA when no input or input wire broken

Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
22…30 mA when no input or input wire broken
[Us] rated supply voltage 24 V DC non isolated +/- 20 %
Current consumption <= 40 mA for voltage output
<= 60 mA for current output
Local signalling LED (green)power ON:
Measurement error +/- 0.5 % of full scale (3 or 4 wires) at 20 °C
+/- 1 % of full scale (2 wires) at 20 °C
+/- 10 % of full scale at 20 °C (electromagnetic interference of 10 V/m)
Repeat accuracy +/- 0.2 % full scale at 20 °C
+/- 0.6 % full scale at 60 °C
Temperature coefficient 150 ppm/°C
Maximum wiring resistance 0.2 Ohm connection in 2 wires
Clamping connection capacity 2 x 1.5 mm²
1 x 2.5 mm²
Tightening torque 0.6…1.1 N.m
Marking CE
Surge withstand 0.5 kV during 1.2/50 µs conforming to IEC 61000-4-5
[Ui] rated insulation voltage 2000 V
Fixing mode Clip-on (35 mm symmetrical DIN rail)
Fixed (mounting plate)
Safety reliability data MTTFd = 32.9 years
B10d = 30437
Net weight 0.12 kg

Mar 9, 2020
1
Environment
Electromagnetic compatibility Electrostatic discharge - test level: 6 kV level 3 (contact discharge) conforming to
IEC 61000-4-2
Electrostatic discharge - test level: 8 kV level 3 (air discharge) conforming to IEC
61000-4-2
Standards EN/IEC 60751
DIN 43760
EN/IEC 60947-1
EN/IEC 60584-1
Product certifications UL
CSA
GL
IP degree of protection IP20 (terminal block)
IP50 (housing)
Fire resistance 850 °C conforming to IEC 60695-2-1
850 °C conforming to UL
Shock resistance 50 gn for 11 ms conforming to IEC 60068-2-27
Vibration resistance 5 gn (f= 10…100 Hz) conforming to IEC 60068-2-6
Resistance to fast transients 1 KV (on input-output) conforming to IEC 61000-4-4
2 kV (on power supply) conforming to IEC 61000-4-4
Disturbance radiated/conducted CISPR 11
CISPR 22 group 1 - class B
Ambient air temperature for storage -40…85 °C
Ambient air temperature for operation 0…50 °C mounting side by side
0…60 °C 2 cm spacing
Pollution degree 2 conforming to IEC 60664-1

Offer Sustainability
Sustainable offer status Green Premium product
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS
Declaration
Mercury free Yes
RoHS exemption information
Yes
China RoHS Regulation
China RoHS Declaration
Environmental Disclosure
Product Environmental Profile
Circularity Profile
End Of Life Information
WEEE The product must be disposed on European Union markets following specific
waste collection and never end up in rubbish bins

Contractual warranty
Warranty 18 months

2
Product data sheet RMPT70BD
Dimensions Drawings

Analog Interface (Converter)

Dimensions

(1) Terminal block AB1TP435U or AB1RRNTP435U2

3
Product data sheet RMPT70BD
Mounting and Clearance

Mounting

Mounting on Rails AM1•••••

Panel Mounting

4
Product data sheet RMPT70BD
Connections and Schema

Analog Interface: Converter for Universal Pt100 Probe

Wiring Diagram

The input, output and power supply lines must be kept away from the power cables to avoid effects due to induced interference.
The input and output cables must be shielded as indicated in the schemes and must be kept away from each other.

Input Connections
2-wire type

RL1 + RL2 ≤ 200 mΩ

RL1 = RL2 = RL3

RL1 + RL2 ≤ 200 Ω