DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/17.

5i-
M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m
Model: ATR4517R0

Antenna Specifications

Electrical Properties
790 - 960 2 x (1710 - 2180)
Frequency range (MHz)
790 - 862 824 - 894 880 - 960 1710 - 1880 1850 - 1990 1920 - 2180
Polarization +45° , -45°
Electrical downtilt (°) 0 - 10 , continuously adjustable, each band separately
at mid Tilt 16.8 17.1 17.3
over all Tilts 16.7 ±0.4 16.9 ±0.4 17.1 ±0.4
at mid Tilt 17.1 17.6 17.6
Gain (dBi) Bottom
over all Tilts 16.9 ±0.4 17.4 ±0.4 17.4 ±0.4

Tri-band
at mid Tilt 17.1 17.3 17.3
Top
over all Tilts 16.8 ±0.4 17.1 ±0.4 17.0 ±0.5
Side lobe suppression for first side
> 19 > 19 > 19 > 18 > 16 > 15
lobe above main beam (dB)
Horizontal 3dB beam width (°) 69 ±2.0 66 ±2.0 65 ±3.0 63 ±4.0 62 ±3.0 60 ±4.0
Bottom: 7.5 Bottom: 7.0 Bottom: 6.6
Vertical 3dB beam width (°) 8.4 ±0.4 8.0 ±0.4 7.5 ±0.4 ±0.3 ±0.3 ±0.4
Top: 7.0 ±0.3 Top: 6.5 ±0.3 Top: 6.1 ±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 30
≥ 40 (790 - 960 // 1710 - 2180 MHz)
Interband isolation (dB)
≥ 40 (1710 - 2180 // 1710 - 2180 MHz)
Front to back ratio, ±30° (dB) > 25 > 25 > 26 > 26 > 26 > 26
Cross polar ratio (dB) 0° > 28 > 28 > 28 > 20 > 20 > 20
Max. power per input (W) 500 (at 50℃ ambient temperature) 300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2680 x 259 x 135
Packing dimensions (H x W x D) (mm) 2965 x 305 x 190
Antenna weight (kg) 25.0
Clamps weight (kg) 3.0 (2 units)
Antenna packing weight (kg) 33.0 (Included clamps)
Mast diameter supported (mm) 50 - 115
2680

Radome material Fiberglass

2572

Radome colour Light grey

Operational temperature (℃) -40 .. +65
Frontal: 970 (at 150 km/h)
Wind load (N) Lateral: 500 (at 150 km/h)
Rear side: 1285 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 6 x 7/16 DIN Female
Connector position Bottom

137
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7 (495) 109-02-08 sales@bbrc.ru www.bbrc.ru
 DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/17.5i-
M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m
Model: ATR4517R0

Accessories

Item Model Description Weight Units per antenna

Downtilt kit ASMDT0C01 Mechanical downtilt: 0 - 8 ° 2.1 kg 1 (Separate packing)

Integrated RET Specifications

Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 10 (motor activated)
Power consumption (W)
< 0.5 (stand by)
Adjustment time (full range) (s) < 37 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
3 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching
function, contact Huawei before system installation.

Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC part15
Certification: CE, FCC, RoHS, WEEE

Integrated RET S/N:

HWMxxx…….r bT

HWMxxx…..bT
HWMxxx…bbB
bbB
r - Red b - Blue
T - Top array B - Bottom array r

Pattern sample for reference

1710 - 2180 MHz 1710 - 2180 MHz

790 - 960MHz (Bottom) (Top)

138
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7 (495) 109-02-08 sales@bbrc.ru www.bbrc.ru