Chassis Module Output Pins
Chassis Module Output Pins
Chassis Module Output Pins
Chassis Module
C1.J - Right Backup Lamp
Combined
C1.H - Backup Alarm
In Test Mode, the outputs will 6.7A C3.C - OPT. (Fog/Road Lamps)
deliver more current load than Combined C3.D - OPT. (Fog/Road Lamps)
the maximum allowable current
values shown. When testing, do
not exceed the maximum
combined values for more than a
0.85A C5.H - AMU Solenoid #0
few minutes or the life of the
output driver inside the CHM 0.85A C5.J - AMU Solenoid #1
may be shortened.
0.85A C5.L - AMU Solenoid #2
*Maximum allowable combined
current load when turn signals 0.85A C5.M - AMU Solenoid #3
are flashing.
0.2A C2.A - Trailer Power Relay
CHASSIS MODULE OUTPUT PINS
(MAXIMUM ALLOWABLE CURRENT LOAD)
Chassis Module
Combined C1.G - Turn Left Rear
Expansion Module
6.7A C3.R - Spare Output #0
NOTE:
Currents listed are the maximum 6.7A C3.L - Spare Output #1
allowable current load for each
output pin. When maximum
allowable current load is
exceeded, the EXM software will 6.7A C1.N - Spare Output #2
shut the output pin.
6.7A C1.L - Spare Output #3
In Test Mode, the outputs will
deliver more current load than
the maximum allowable current
values shown. When testing, do
not exceed the maximum values
for more than a few minutes or
the life of the output driver inside
the EXM may be shortened.