Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 34 views

    Quiz 2 Problem Statement (A, B, C)

    Uploaded by

    AbdullahJaved
    This document contains information about three different quiz problems involving the design of riveted lap joints and butt joints between steel plates. Quiz 2A involves designing a quadrupled riveted lap joint between 7mm thick plates. Quiz 2B involves designing a double riveted double strap butt joint between 7.5mm thick plates. Quiz 2C involves designing a triple riveted double strap butt joint with inline riveting between 6.5mm thick plates. Each quiz asks the reader to determine rivet properties like diameter and pitch as well as the number of rivets in a single row.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Quiz 2 Problem Statement (A, B, C)

    Uploaded by

    AbdullahJaved
    34 views1 page
    This document contains information about three different quiz problems involving the design of riveted lap joints and butt joints between steel plates. Quiz 2A involves designing a quadrupled riveted lap joint between 7mm thick plates. Quiz 2B involves designing a double riveted double strap butt joint between 7.5mm thick plates. Quiz 2C involves designing a triple riveted double strap butt joint with inline riveting between 6.5mm thick plates. Each quiz asks the reader to determine rivet properties like diameter and pitch as well as the number of rivets in a single row.

    Original Description:

    Original Title

    Quiz 2 problem statement (A,B,C)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains information about three different quiz problems involving the design of riveted lap joints and butt joints between steel plates. Quiz 2A involves designing a quadrupled riveted lap joint between 7mm thick plates. Quiz 2B involves designing a double riveted double strap butt joint between 7.5mm thick plates. Quiz 2C involves designing a triple riveted double strap butt joint with inline riveting between 6.5mm thick plates. Each quiz asks the reader to determine rivet properties like diameter and pitch as well as the number of rivets in a single row.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    34 views1 page

    Quiz 2 Problem Statement (A, B, C)

    Uploaded by

    AbdullahJaved
    This document contains information about three different quiz problems involving the design of riveted lap joints and butt joints between steel plates. Quiz 2A involves designing a quadrupled riveted lap joint between 7mm thick plates. Quiz 2B involves designing a double riveted double strap butt joint between 7.5mm thick plates. Quiz 2C involves designing a triple riveted double strap butt joint with inline riveting between 6.5mm thick plates. Each quiz asks the reader to determine rivet properties like diameter and pitch as well as the number of rivets in a single row.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    INTRODUCTION 12/28/2013

    Quiz # 2 (A) Quiz # 2 (B)


    Two plates of 7 mm thick and 500 mm wide are connected by Two plates of 7.5 mm thickness and 1m wide each are to be
    a quadrupled riveted lap joint. joined by means of a double riveted double strap butt joint.
    Calculate the rivet diameter, rivet pitch and distance between
    rows of rivets for the joint. Also find the number of rivets in a Determine the rivet diameter, rivet pitch and number of rivets in
    single row? a single row. Take the working stresses in tension and crushing
    The safe working stresses are as follows : as 80 MPa and 120 MPa respectively.
    σ = 150 MPa ; τ= 75 MPa ; and σ = 175 MPa.

    Quiz # 2 (C)
    Design a triple riveted double strap butt joint with inline
    riveting with 6.5mm thick and 800 mm wide plates.
    The allowable stresses are :
    σ = 105 MPa ; τ= 77 MPa ; and σ = 162.5 MPa.
    Also find the number of rivets in a single row.

    You might also like