Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 152 views

    Job Safety Analysis: Abqaiq Plants Operation

    Uploaded by

    Zia ur Rehman
    This Job Safety Analysis document summarizes the job tasks, hazards, and safety requirements for installation work involving a split tee on an existing fuel gas line at the Abqaiq Gas Plant. Key steps include lifting, cutting, welding, and hot tapping activities. Personal protective equipment is required, along with conducting safety meetings and ensuring emergency response plans are followed. The document provides details on coordination needed between the contractor and plant operations to safely complete the work.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Job Safety Analysis: Abqaiq Plants Operation

    Uploaded by

    Zia ur Rehman
    152 views5 pages
    This Job Safety Analysis document summarizes the job tasks, hazards, and safety requirements for installation work involving a split tee on an existing fuel gas line at the Abqaiq Gas Plant. Key steps include lifting, cutting, welding, and hot tapping activities. Personal protective equipment is required, along with conducting safety meetings and ensuring emergency response plans are followed. The document provides details on coordination needed between the contractor and plant operations to safely complete the work.

    Original Description:

    Safety Fequirements

    Original Title

    HOT TAP

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This Job Safety Analysis document summarizes the job tasks, hazards, and safety requirements for installation work involving a split tee on an existing fuel gas line at the Abqaiq Gas Plant. Key steps include lifting, cutting, welding, and hot tapping activities. Personal protective equipment is required, along with conducting safety meetings and ensuring emergency response plans are followed. The document provides details on coordination needed between the contractor and plant operations to safely complete the work.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    152 views5 pages

    Job Safety Analysis: Abqaiq Plants Operation

    Uploaded by

    Zia ur Rehman
    This Job Safety Analysis document summarizes the job tasks, hazards, and safety requirements for installation work involving a split tee on an existing fuel gas line at the Abqaiq Gas Plant. Key steps include lifting, cutting, welding, and hot tapping activities. Personal protective equipment is required, along with conducting safety meetings and ensuring emergency response plans are followed. The document provides details on coordination needed between the contractor and plant operations to safely complete the work.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 5

    CONTRACT NO.

    6600030489
    COGENERATION INTERCONNECTION FACILITIES
    BI-01252 ABQAIQ GAS PLANT

    JOB SAFETY ANALYSIS


    DIVISION: DATE PREPARED: DATE ISSUED:
    PLANT/EQUIPMENT:
    OPERATION 10/19/2015
    ABQAIQ PLANTS
    UNIT: JSA NO.
    UTILITY 08
    DESCRIPTION OF JOB/TASK: EQUIPMENT/TOOLS USED: Crane, Welding Machine and
    1) Consist of installation of split tee 24’’ x 24’’ x 12’’ with existing fuel gas Grinder. Etc.
    line. Activities:
    1. Lifting
    2. Cold cutting
    3. Hot works (welding, grinding)
    PREPARED BY: JASON LLOYD F. SALES REVIEWED BY: APPROVED BY:
    IMAD- SAFETY SUPERVISOR SAFETY & COMPLIANCE GROUP OPS FOREMAN

    REVIEWED BY: APPROVED BY: APPROVED BY:


    FRANCOIS NAUDE PROCESS AREA ENGINEER MAINT. SUPERVISOR
    SAPMT – SAFETY ADVISOR
    REFERENCES: CSM 5th Edition & GI’s
     2.100 – WORK PERMIT SYSTEM
     2.709 – GAS TESTING
     7.025 - HEAVY EQUIPMENT OPERATOR TESTING AND CERTIFICATION
     7.031 - EQUIPMENT SERVICES
     HEAT STRESS PLAN – SACSM Chapter 1-13

    1
    CONTRACT NO. 6600030489
    COGENERATION INTERCONNECTION FACILITIES
    BI-01252 ABQAIQ GAS PLANT

    JOB SAFETY ANALYSIS


    DIVISION: DATE PREPARED: DATE ISSUED:
    PLANT/EQUIPMENT:
    OPERATION 10/19/2015
    ABQAIQ PLANTS
    UNIT: JSA NO.
    UTILITY 08
    SAFETY EQUIPMENT REQUIRED:
     Personal Protective Equipment (PPE&FRC)
     Conduct safety meeting with the execution team (OPS and contractor) the condition with the required precaution
     Orientation & EMERGENCY RESPONSE PLAN should be communicated

    Recommendations/Notes ASSIGNED TO:


    1 All site personnel are required to wear appropriate PPE such as Safety IMAD CO./ OPERATION & PMT
    Helmet, Safety Glasses, Gloves, and Safety Shoes
    2 Conduct Tool Box Safety Meeting prior to every work activity IMAD CO./ SAFETY OFICER & FOREMAN/SUPERVISOR
    3 Explain to key personnel the purpose of JSA and enforce the implementation
    of content. IMAD CO./ ENGINEER
    4 Use the JSA to identify hazards and list the precaution on the permit.
    5 Garbage shall be disposed properly on a daily basis. IMAD CO./ OPERATION
    6 If an injury or near occurs, the JAS shall be reviewed immediately to
    determine whether changes are needed in the job procedures. IMAD CO./ SAFETY OFICER & FOREMAN
    7 In case of any emergencies, the Project Emergency Preparedness &
    Response Plan be followed all affected personnel and Certified First Aider and IMAD CO./ SAETY /COORDINATOR / SUPERVISOR/WPR
    Ambulance shall be ready and available.
    EMERGENCY RESPONSE PROCEDURE EMERGENCY CONTACT NO. When reporting an emergency give the clear
    In an EMERGENCY, or on hearing of “Stop Work Saudi Aramco – 110 information such as:
    Alarm”, every supervisor shall ensure the following: SAPMT:
    1. All work is stopped at once. Francois Naude 0540997678 1. Your exact location.
    2. All equipment is shutdown. Shayban Abdul hakeem 0558120105 2. Nature of emergency.
    3. All personnel are evacuated to the predetermined

    2
    CONTRACT NO. 6600030489
    COGENERATION INTERCONNECTION FACILITIES
    BI-01252 ABQAIQ GAS PLANT

    assembly area. IMAD COMPANY 3. Service required and repeat he message.


    4 All roll on call is taken and man is accounted for. Mohammad Zawana 0596932643 4. Your name and badge number.
    5. No one is permitted to return until notification has Abdullah Bamallan 0500563513
    been receive from operations or from the company. Moises P. Bias 0553991185 Stay on the telephone until you are told to hang
    Jason Lloyd Sales 0500674202 up post a lookout to direct the ambulance, fire
    HSE Officer truck or helicopter to the right location.
    Ali Naser Sha 0582513784

    SEQUENCE OF BASIC JOB STEPS POTENTIAL HAZARDS REQ HAZARD CONTROLS/SAFE WORK
    PROCEDURES

    1. Request work permits and permission


     Unauthorized Work  Secure an approved & valid work permits
    Joint site inspection
     Certified work permit receivers should be present
     Joint walkthrough from permit issuer and work permit
    receivers
    2. Hot Tap Location  Poor Communication/Miss Location  Joint survey with the operation personnel on the hot
    tap exact location. *As-built and IFC drawings
    to be provided.

     Falling from height/Injury to Personnel  Obtain work permit per G.I. 2.100
    3.Scaffolding Erection  All scaffold crews for erection shall wear full body
    harness and 100% tie off. * Scaffolding shall be
    erected, inspected and tagged as per the requirements
    of G.I. 8.001

    3
    CONTRACT NO. 6600030489
    COGENERATION INTERCONNECTION FACILITIES
    BI-01252 ABQAIQ GAS PLANT

    4. Ultrasonic Testing  Wrong interpretation Provide qualified technician for ultrasonic testing.

    SEQUENCE OF BASIC JOB STEPS: POTENTIAL HAZARDS RECOMMENDED ACTION OR PROCEDURE

     Provide taglines on all loads to be lifted/no lifts if wind exceeds 32


    KPH.
     Hot tap machine shall be rigidly supported.

    5) Hot Tapping Activities  Obtain work permit, all work shall be in strict compliance with G.I.
    2.100.
     Ensure that all relevant personnel are aware of the hot top activities.
     Ensure that the proper safety and firefighting equipment’s are on site
    and in working condition.
     Provide barricades and warning signs around the work area.
     Hot tap technician shall be certified by the hot tap equipment
    manufacturer.
     Maintain good housekeeping of jobsite.

     Obtain work permit as per G.I.2.100


     Cranes shall have valid inspection sticker.
    6) Dismantling of Hot Tap Machine
     Cranes shall be level & outriggers shall be fully extended.

    4
    CONTRACT NO. 6600030489
    COGENERATION INTERCONNECTION FACILITIES
    BI-01252 ABQAIQ GAS PLANT

    Crane Lifts and Rigging  G.I. 7.028 requirements shall be fully implemented
     Rigging hardware shall be inspected prior to lifting.
     Crane lift areas shall be barricaded and warning signs posted.
     Provide taglines on all loads to be lifted/no lifts if wind exceeds 32
    KPH.
     Maintain good housekeeping of the work area.

    You might also like