Oh-Lite®: Single Mode Optical Fibre ITU-T G.652.D
Oh-Lite®: Single Mode Optical Fibre ITU-T G.652.D
Oh-Lite®: Single Mode Optical Fibre ITU-T G.652.D
OH-LITE®
Single Mode Optical Fibre ITU-T G.652.D
Product Description
OH-LITE® Single Mode Optical Fiber is a low water peak fiber where attenuation at 1380-1390 nm is less than attenuation
at 1310 nm.
Product Application
OH-LITE® is ideal for regional, metropolitan and local access networks using CWDM.
Product Benefits
OH-LITE® single mode fiber is designed for use over the entire 1260 nm to 1625 nm wavelength range. This gives it much
more useable spectrum than conventional single mode fiber.
Product Specifications
≤ 0.34 dB/km at 1310 nm
≤ 0.34 dB/km at 1383 nm or less than attenuation at 1310 nm#
Attenuation ≤ 0.22 dB/km at 1490 nm
(Typical Values)
≤ 0.20 dB/km at 1550 nm
≤ 0.23 dB/km at 1625 nm
# After hydrogen aging according to IEC-60793-2-50 regarding the B1.3 fiber category
* Individual Fiber values may change when cabled
Mechanical Characteristics
Proof Test Levels ≥ 100 kpsi (0.7GN/m2). This is equivalent to 1% strain
Coating strip force(Force to mechanically ≥ 1.3 N (0.3 lbf) and ≤ 5.0 N (1.1lbf)
strip the dual coating)
Tensile Strength - Aged (Median) ≥ 3.03 GPa
Tensile Strength - Un Aged (Median) ≥ 3.80 GPa
Fibre curl ≥4m
Macro bend loss: The maximum attenuation with bending does not exceed the specified values with the following deployment conditions
Temperature dependence
≤ 0.05 dB/km
Induced attenuation, -60°C to +85°C at 1310, 1550, 1625 nm
High temperature and humidity aging 85°C at 85% RH, 30 days Induced attenuation at
≤ 0.05 dB/km
1310, 1550, 1625 nm due to aging
*Typical values
Manufacturing Process
STL controls every stage of the manufacturing process so that quality is built in to every meter of fibre, rather
than selected out at the end through testing. To ensure the accuracy and precision of the manufacturing process,
STL routinely calibrates and recertifies process equipment and measurement benches against internationally
traceable standards from NPL/NIST, and follow test methods compliant with EIA/TIA, CEI-IEC and ITU standards.
International Standards
STL OH-LITE® complies with or exceeds ITU recommendation G.652.C/D and I EC 60793-2-50.
Service USP’s
Complete range of optical fibre for terrestrial networks
World-wide sales support
Web-based order tracking & customer support
Specialized technical support
Disclaimer
STL’s policy of continuous improvement may result in a change in specifications without prior notice. Any
warranty of any nature relating to any STL product is only contained in the written agreement between
STL and the direct purchaser of such product(s).
© 2019 Sterlite Technologies Limited. All rights reserved. The word and design marks set forth herein
are trademarks and/or registered trademarks of STL and/or related affiliates and subsidiaries.
All other trademarks listed herein are the property of their respective owners.
www.sterlitetech.com