SMALL DIAMETER

XXX CUT-OFF

16 NORTON – THE MUSCLE BEHIND THE MACHINE

www.nortonabrasives.com 17
 SMALL DIAMETER MACHINES USED
REINFORCED CUT-OFF WHEELS
CATEGORY DEFINITION
The Norton small diameter cut-off wheel line consists of Type 01 straight and Type 27
depressed center cut-off wheels from 1-1/2" to 9" diameters. These wheels come in ultra
thin .035 for quick burn/burr free cutting to .125" for more durable applications. All are
reinforced for the demanding nature of portable cut-off.

APPLICATIONS: Cutting sheet metal, cutting pipe, and metal plate dimensioning
(metal fabrication)
SIZE RANGE: 1-1/2" - 9" diameter
THICKNESS RANGE: .035, .040, .045, .060, .090, and .125
ABRASIVE GRAIN: Ceramic Alumina/Zirconia Alumina, Zirconia Alumina/Aluminum Oxide,
Aluminum Oxide, Silicon Carbide
SHAPE: Type 01 Straight and Type 27 Depressed Center

TYPE-TO-APPLICATION RECOMMENDATION GUIDE

WHEEL TYPE/THICKNESS APPLICATIONS
TYPE 01 Type 1 cut-off wheels are designed for traditional cut-off applications.
All are supplied with full fiberglass reinforcing.

90° ANGLE

.035, .040, .045, .060 Where fast cutting and low kerf loss are desired ■ ■
.090, .125 For tough cutting and notching applications where stability is important ■ ■

TYPE 27 Type 27 cut-off wheels are designed with a depressed center to provide
a recess for the hub, which allows flush cutting

90° ANGLE
.040, .045, .060 Where fast cutting and low kerf loss are desired ■
.090, .125 For tough cutting and notching applications where stability is important ■

HOW TO PICK THE RIGHT BOND TYPE

All Purpose Unmarked Where an excellent blend of cut rate and life is needed
Fast Cut FC Where fast stock removal is needed, or the application only allows for low-pressure or under-horsepowered grinders
Long Life LL Where durability is needed due to severe application, and when horsepower of the grinder allows for heavy pressure
Contaminate Free INOX Contain <0.1% iron, sulfur or chlorine for rust-free and corrosion-free results; will not contaminate stainless steel
Aluminum ALU Specially formulated bond for reduced loading/surface contamination cutting aluminum/soft materials

MATERIAL-TO-PRODUCT RECOMMENDATION GUIDE

HIGHEST PRODUCTIVITY EXCELLENT BLEND OF CONSISTENT PERFORMANCE
BEST LOWEST TOTAL COST BETTER PERFORMANCE & PRICE GOOD LOW INITIAL PRICE
CUTTING
Mild Carbon / High Tensile Steel NorZon Plus Charger Metal
Stainless Steel / Alloys NorZon Plus Charger Gemini
Contaminate Free Charger INOX Gemini INOX
Cast Iron NorZon Plus Charger Gemini
Aluminum / Bronze / Brass Gemini ALU
Asphalt / Brick / Concrete Masonry

18 NORTON – THE MUSCLE BEHIND THE MACHINE

 SMALL
RIGHT DIAMETER
ANGLE & SMALL MACHINES USED
REINFORCED CUT-OFF WHEELS
DIAMETER CUT-OFF WHEELS
CROSS REFERENCE GUIDES
TYPE 01 .035 - .125 CUT-OFF WHEELS FOR DIE GRINDERS
TOTAL PERFORMANCE INITIAL PRICE SPECIALTY

BEST BETTER GOOD GOOD

NorZon Plus Charger Gemini Gemini Metal Gemini
Fast Cut INOX
Brilliant — Brill-Max ZA — — Safe-Tex FC, LL —
Bullard — ZA46T, ZA60T TA36T TA46T, TA60T A36T, A60T Comp. —
Camel — ZA60-TBF A36 RBF A60 RBF Fast Cut RBF —
Flexovit Flexon Fast Cut — High Perf High Perf Fast Cut — —
A46, 60 Fast Grind A36 A36, 46, 60
Pearl — SRT, Zirconia — Premium Silver Line —
Pferd — — — — PSF-A SG-A-R-INOX
Sait Saittech — A60S A24R, A36T, A60T — —
SpedeCut — — — — A46, 60 TBXX —
Walter — — A24 ZIP A60 ZIP — —

TYPE 01 AND 27 .040 - .125 CUT-OFF WHEELS FOR RIGHT ANGLE GRINDERS
TOTAL PERFORMANCE INITIAL PRICE SPECIALTY

BEST BETTER GOOD GOOD

NorZon Plus NorZon Plus Charger Charger Gemini Gemini Metal Gemini Gemini Masonry
Fast Cut Fast Cut Fast Cut ALU INOX
Brilliant — — — — Brill-Blade Brill-Blade Hornet — — —
Extra FC Heavy Duty Stinger
Bullard — — — ZA60T SGA60U TA46T, TA60T, A46T, AL46N — C24R
TA60U A60T Comp.
Camel — — — ZA Quickie Cut A36-S-BF Super Quickie Quickie Cut A46 Quickie A60-T-BF, —
Cut Cut WA60R
Quickie Cut
Flexovit — — — — Razorblade Razorblade — Razorblade — C30U
A60SST A24T, 30V, 36T A30Q
Metabo — — A 60 XP — A 60 TX A 60 TZ — — —
— Super Slicer Slicer-Plus Slicer
Pearl — — — Redline Max — Slimcut Slimcut Pro-V, — — —
Slimcut Sliverline
Pferd — — — SGP-ZA-Q-INOX — SG-A-S, PSF-A-P S-G-N-ALU SG-A-R-INOX, SG-C-R
SGP-A-T SGP-A-S-INOX
Sait — Saitech — Z-tech SAIT.M.X A60S — A46N XA46R
SpedeCut — — — — — — A46, 60 TBXX — — —
Walter — — — — A-30-ZIP A-60-ZIP — A-60-ZIP-ALU A60-SS-ZIP C-30-ZIP

FEATURED PRODUCTS

NORZON PLUS CUT-OFF / RIGHTCUT

BEST CHOICE FOR HIGHEST PRODUCTIVITY FOR STEEL, STAINLESS STEEL AND
ALL OTHER FERROUS METALS
FEATURES BENEFITS
• Patented Norton SG (ceramic alumina) / • Fastest cutting wheel available on the market,
NorZon (zirconia alumina) grain combination up to 3X faster cutting versus aluminum oxide
• Highly advanced bond system • 3X – 10X life versus aluminum oxide wheels on carbon steel,
stainless and cast iron

CHARGER CUT-OFF / RIGHTCUT

BETTER CHOICE FOR ALL STEEL AND STAINLESS STEEL APPLICATIONS
FEATURES BENEFITS
• A unique blend of premium NorZon • 2X – 3X the life of aluminum oxide wheels
(zirconia alumina) and aluminum oxide grain • Up to 2X faster cutting versus aluminum oxide wheels

www.nortonabrasives.com 19
 SMALL DIAMETER MACHINES USED
REINFORCED CUT-OFF WHEELS

AVAILABILITY

TIER: BEST BETTER BETTER GOOD GOOD GOOD

TRADENAME: NORZON PLUS CHARGER A60-OBNA2 GEMINI GEMINI NORTON METAL
LONG LIFE
SHAPE: Type 01 Type 01 Type 01 Type 01 Type 01 Type 01
ABRASIVE: Ceramic Alumina/ Zirconia Alumina/ Aluminum Oxide Aluminum Oxide Aluminum Oxide Aluminum Oxide
Zirconia Alumina Aluminum Oxide
MATERIAL: STAINLESS STAINLESS STAINLESS STAINLESS STAINLESS STAINLESS
STEEL / METAL STEEL / METAL STEEL / METAL STEEL / METAL STEEL / METAL STEEL / METAL
SIZE MAX. STD.
(D X T X H) RPM PKG. PART NO. PART NO. PART NO. PART NO. PART NO. PART NO.

TYPE 01 – CUT-OFF
1-1/2 x .035 x 1/16 40,745 25 66243427764
1-1/2 x .035 x 1/8 40,745 25 66243427831
1-1/2 x .035 x 1/4 40,745 25 66243427875
2 x .035 x 1/8 30,560 25 66243411392 FC
2 x .035 x 1/4 30,560 25 66243428014 66243411393 FC
2 x .035 x 3/8 30,560 25 66243411394 FC
2 x .060 x 1/8 30,560 25 66243428041
2 x .060 x 1/4 30,560 25 66243427993
2 x .060 x 1/4 30,560 25 66243411395 FC
2 x .060 x 3/8 30,560 25 66243411396 FC
2 x .125 x 1/4 30,560 25 66243411402 FC
2 x .125 x 3/8 30,560 25 66243411403 FC
2-1/2 x .035 x 1/8 30,560 25 66243528476
2-1/2 x .035 x 1/4 30,560 25 66243528425
2-1/2 x .060 x 1/4 30,560 25 66243510640 FC
2-1/2 x .060 x 3/8 30,560 25 66243510641 FC
2-7/8 x .035 x 1/4 25,465 25 07660789019
3 x .035 x 1/4 25,465 25 66243510668 66243528573 66243510627 FC
3 x .035 x 3/8 25,465 25 66243510669 66243527753 66243528574 66243510628 FC 66243537271 LL 07660789451
3 x .060 x 1/4 25,465 25 66243510670 66243528471 66243510645 FC 66243510649 LL
3 x .060 x 3/8 25,465 25 66243510671 66243527755 66243528552 66243510647 FC 66243510648 LL 07660789012
25 66243510835 LL
3 x .125 x 1/4 25,465 25 66243510650 FC 66243510652 LL
3 x .125 x 3/8 25,465 25 66243510673 66243510651 FC 66243510653 LL 07660789384
4 x .035 x 1/4 19,100 25 66243529606 66243510629 FC
4 x .035 x 3/8 19,100 25 66243510675 66243527340 66243529621 66243510630 FC 66243537273 LL
4 x .035 x 1/2 19,100 25 66243529622
4 x .035 x 5/8 15,280 25 66243529590
4 x .035 x 3/4 19,100 25 66243529609
4 x .040 x 5/8 15,280 25 07660701616
4 x .045 x 5/8 15,280 25 66243527956
4 x .060 x 1/4 19,100 25 66243510676 66243510654 FC
4 x .060 x 3/8 19,100 25 66243510677 66243527338 66243529604 66243510655 FC 66243510657 LL
4 x .090 x 5/8 15,280 25 66243527955
4 x .125 x 1/4 19,100 25 66243510658 FC
4 x .125 x 3/8 19,100 25 66243510841 66243527339 66243510659 FC 66243510661 LL
25 66243510680 LL
5 x .035 x 3/8 12,225 25 66252830653
6 x .035 x 3/8 10,185 25 66252835064
6 x .035 x 1/2 10,185 25 66252835053
6 x .035 x 5/8 10,185 25 66252835054 66252809714
6 x .060 x 5/8 10,185 25 66252809718
7 x .060 x 5/8 8,730 25 66252905957
8 x .060 x 5/8 7,640 25 66253017771 LL 66253007025
10 66253017795
Drill Mount Mandrel 5 07660747769*
* FOR MOUNTING 2" AND 3" x 3/8" HOLE CUT-OFF WHEELS ON TO A DRILL

CUT-OFF DESCRIPTION CODES

INOX = CONTAMINANT FREE FC = FAST CUT LL = LONG LIFE BLANK = ALL PURPOSE
■ = STAINLESS ■ = STEEL / METAL ■ = MASONRY

20 NORTON – THE MUSCLE BEHIND THE MACHINE

 SMALL DIAMETER MACHINES USED
REINFORCED CUT-OFF WHEELS

AVAILABILITY

TIER: BEST BETTER GOOD GOOD

TRADENAME: NORZON PLUS CHARGER GEMINI NORTON METAL
RIGHTCUT RIGHTCUT RIGHTCUT RIGHTCUT
SHAPE: Type 01 Type 01 Type 01 Type 01
ABRASIVE: Ceramic Alumina/ Zirconia Alumina/ Aluminum Oxide Aluminum Oxide
Zirconia Alumina Aluminum Oxide
MATERIAL: STAINLESS STAINLESS STAINLESS STAINLESS
STEEL / METAL STEEL / METAL STEEL / METAL STEEL / METAL
SIZE (D X T X H) MAX. RPM STD. PKG. PART NO. PART NO. PART NO. PART NO.

TYPE 01 – RIGHTCUT CUT-OFF

4 x .040 x 5/8 15,280 25 07660701616
4 x .045 x 5/8 15,280 25 66243527956
4 x .090 x 5/8 15,280 25 66243527955
4-1/2 x .040 x 7/8 13,580 25 66252837011 07660701617
4-1/2 x .045 x 7/8 13,580 25 66252830730 66252826569 66252823602
25 66252832906
4-1/2 x .090 x 7/8 13,580 25 66252823599
5 x .040 x 7/8 12,225 25 66252837012
15 07660701618
5 x .045 x 7/8 12,225 25 66252830731 66252826570 66252823603
25 66252832907
5 x .090 x 7/8 12,225 25 66252823600
6 x .040 x 7/8 10,185 25 07660702757
6 x .045 x 7/8 10,185 25 66252830734 66252826571 66252823604
25 66252832908
6 x .090 x 7/8 10,185 25 66252823601
7 x .060 x 7/8 8,600 25 66252900652 66252832323

Norton Type 01 & 27 RightCut Line – 4" - 9"

Norton RightCut wheels provide lowest total cost versus competitive initial cutting solutions for right angle
grinders. Available in 4" through 9" diameters in Type 01 straight and Type 27 depressed center shapes.

BEST NorZon Plus RightCut BETTER Charger RightCut GOOD Gemini RightCut GOOD Norton Metal RightCut
Highest Productivity, Lowest Total Cost Exceptional Blend of Performance Good Performance, Wide Variety Good Performance,
Advanced grain technology – a blend of and Price and Good Initial Price Low Initial Price
Norton SG® (seeded gel) ceramic alumina Zirconia alumina and aluminum Engineered blend of high- Popular aluminum oxide starting
and NorZon zirconia alumina abrasives – in oxide combination provides up performance aluminum oxide specification where good
the fastest cutting bond system. Across all to 2X cut rate and up to 3X longer provides the best starting performance at a low price is the
grinding jobs, testing shows performance
life over conventional aluminum specification on a wide variety primary consideration.
up to 100% better than competitive high-
performance wheels and up to 10 times oxide products on stainless and of sizes and thicknesses at a
better than aluminum oxide wheels. carbon steel. good initial price.

www.nortonabrasives.com 21
 SMALL DIAMETER MACHINES USED
REINFORCED CUT-OFF WHEELS

AVAILABILITY

TIER: BEST BETTER GOOD GOOD

TRADENAME: NORZON PLUS CHARGER PLUS GEMINI NORTON METAL
RIGHTCUT RIGHTCUT RIGHTCUT RIGHTCUT
SHAPE: Type 27 Type 27 Type 27 Type 27
ABRASIVE: Ceramic Alumina/ Zirconia Alumina/ Aluminum Oxide Aluminum Oxide
Zirconia Alumina Aluminum Oxide
MATERIAL: STAINLESS STAINLESS STAINLESS STAINLESS
STEEL / METAL STEEL / METAL STEEL / METAL STEEL / METAL
SIZE (D X T X H) MAX. RPM STD. PKG. PART NO. PART NO. PART NO. PART NO.

TYPE 27 – RIGHTCUT CUT-OFF

4 x .045 x 5/8 15,280 20 66252833840
25 07660705249
4 x .125 x 3/8 15,280 20 66243529883
4-1/2 x .040 x 5/8-11 13,580 20 66252837013
4-1/2 x .045 x 5/8-11 13,580 20 66252830748 66252832009 66252819549
4-1/2 x .045 x 7/8 13,580 20 66252830742 66252830125 66252819548 66252836497
4-1/2 x .090 x 5/8-11 13,580 20 66252823102 INOX
4-1/2 x .090 x 7/8 13,580 20 66252835320
20 66252823103 INOX
4-1/2 x .125 x 5/8-11 13,580 20 66252815010 66252813301
4-1/2 x .125 x 7/8 13,580 20 66252830443 66252801860
5 x .040 x 5/8-11 12,225 20 66252837014
5 x .045 x 5/8-11 12,225 20 66252830586
5 x .045 x 7/8 12,225 20 66252830744 66252830126 66252819550
5 x .090 x 7/8 12,225 20 66252823106 INOX
20 66252836984 LL
5 x .125 x 7/8 12,225 20 66252801862
6 x .045 x 5/8-11 10,185 20 66252830587
6 x .045 x 7/8 10,185 20 66252830745 66252830127 66252819551
6 x .090 x 7/8 10,185 20 66252832487 INOX
7 x .060 x 7/8 8,600 20 66252912626
10 07660705251
7 x .090 x 7/8 8,600 20 66252914638 INOX
7 x .125 x 5/8-11 8,600 10 66252912625
7 x .125 x 7/8 8,600 20 66252900619
9 x .060 x 5/8-11 6,600 10 66253019115
RIGHTCUT WHEELS ARE TO BE USED FOR CUTTING ONLY

TIER: BETTER GOOD GOOD GOOD

TRADENAME: CHARGER GEMINI NORTON METAL NORTON MASONRY
SHAPE: Type 01 Type 01 Type 01 Type 01
ABRASIVE: Zirconia Alumina/ Aluminum Oxide Aluminum Oxide Silicon Carbide
Aluminum Oxide
MATERIAL: STEEL / METAL STEEL / METAL STEEL / METAL MASONRY
SIZE (D X T X H) MAX. RPM STD. PKG. PART NO. PART NO. PART NO. PART NO.

TYPE 01 – CIRCULAR SAW

6 x .035 x 5/8 10,185 25 66252809714
6 x .060 x 5/8 10,185 25 66252809718
6-1/2 x 1/8 x DM-5/8 9,405 10 07660789098 07660789089
7 x .060 x 5/8 8,730 25 66252905957
7 x 1/8 x DM-5/8 8,730 25 07660789097 07660789088
8 x .060 x 5/8 7,640 25 66253017771 LL 66253007025
10 66253017795
8 x 1/8 x DM-5/8 7,640 10 07660789096 07660789086
DM DENOTES DIAMOND MOUNT; 5/8" HOLE BUSHINGS INCLUDED

CUT-OFF DESCRIPTION CODES

INOX = CONTAMINANT FREE FC = FAST CUT LL = LONG LIFE BLANK = ALL PURPOSE
■ = STAINLESS ■ = STEEL / METAL ■ = MASONRY

22 NORTON – THE MUSCLE BEHIND THE MACHINE

HIGH SPEED CUT-OFF

www.nortonabrasives.com 23
 HIGH SPEED MACHINES USED
REINFORCED CUT-OFF
CATEGORY DEFINITION
Norton high speed cut-off abrasive wheels provide the industry’s leading performance in
all high speed gas and electric-powered applications.

APPLICATIONS: Metalworking: steel, stainless, ductile, cast iron, rail steel and
metal decking
Non-Metal Building Materials: concrete, brick, masonry, asphalt,
aggregate, stone and schedule 40 and 80 PVC pipe
Rescue and Demolition: steel, acrylic, fiberglass, rubber, glass, wood,
concrete, brick and asphalt
SIZE RANGE: 12" – 16" diameter
THICKNESS RANGE: 1/8"
ABRASIVE GRAIN: Aluminum Oxide, Silicon Carbide
SHAPE: Type 01 Straight
REINFORCEMENT: Wheels are offered in standard two layer reinforcement as well
as three layer reinforcement for higher speed saws and
heavy-duty applications
ARBOR: Wheels are offered with a patent-pending universal arbor that
accommodates both 20mm (Stihl®) and all other machines with
1" arbors

MATERIAL / APPLICATION-TO-PRODUCT RECOMMENDATION GUIDE

ICON APPLICATION

Metal High-performance aluminum oxide grain wheels designed for general purpose cutting of all steel and stainless parts
including rebar, steel pipe, structural steel, sheet metal, cable and small to medium diameter solid pieces

Metal Decking High-performance aluminum oxide abrasive combined with a thicker wheel that stands up to the sharp edges of sheet
metal and roof decking.

Rail Steel A finer grit, harder grade aluminum oxide wheel designed for straight, fast cuts on all sizes of rail track. Additional
high-performance lines of rail cut wheels are available for production applications.

Ductile/Cast Iron A special blend of silicon carbide abrasive for cutting and aluminum oxide abrasive for life, designed to cut ductile and
cast iron pipe, concrete-lined water pipes, sewer construction and heavy duty PVC.

Rescue For ventilation, forcible entry, rescue and demolition. A versatile abrasive formula that can be used on a wide range
of materials including all types of metals and masonry

Concrete Coarse grit silicon carbide abrasive provides a low initial cost solution for cutting brick, block, concrete or other masonry
materials. For higher-production applications that require optimum speed of cut and product life, please see our complete
selection of high speed diamond wheels in our Norton Construction diamond product line.

Asphalt A special blend of extra coarse silicon carbide abrasive grains provides a low initial cost solution for cutting asphalt, green
concrete, asphalt over concrete, a wide range of aggregates and abrasive materials. For higher-production applications
that require optimum speed of cut and product life, please see our Norton Construction diamond product line.

HOW TO PICK THE RIGHT REINFORCEMENT

Two full layers of reinforcing are offered for lower power machines, and light to medium applications where speed of cut is the
primary selection criterion.

Three full layers of reinforcing are recommended for high speed, high horsepower machines where the application is heavy-duty,
and durability is the primary selection criterion.

Universal Arbor
Two Blade Sizes in One
Our Norton patent-pending 1"/20mm knock-out arbor fits all gas and electric high speed saws. A 20mm bushing is
pre-mounted into the 1" molded arbor hole. The wheel, with the 20mm bushing, can be mounted directly on any 20mm
arbor high speed saw. With the bushing removed, exposing the 1" arbor hole, the wheel can be mounted on any
1" arbor high speed saw. Combining this arbor, with heavy-duty triple reinforcing results in a higher performing,
extra strong, longer lasting cutting wheel. Once the 20mm bushing is removed, it cannot be replaced.

24 NORTON – THE MUSCLE BEHIND THE MACHINE

 HIGH SPEED MACHINES USED
REINFORCED CUT-OFF
CROSS REFERENCE GUIDE
SPECIALTY

GOOD
Metal Metal Decking Rail Steel Ductile Concrete Asphalt
Abmast A 24 R, A 24 T Rail-Kut A 24 Z AC 24 R, C 24 R, C 16 T,
Kompetitor Metal Kompetitor Ductile Iron Kompetitor Concrete Kompetitor Asphalt
Brilliant Metal/Stainless — A24PB — Concrete/Masonry —
Bullard Blaze A24R, ZA24Q, TA24R A30R AC24R C24R, The Competitor CC20R
& Road Warrior The Competitor
Camel A24-R A24-T — AC24-R C24-R C16-U
Flexovit A24/30SB A24TB A30PB AC24SB C30UB C16UB
Husqvarna Blue XHS, Blue QMS-CM, Grey QMS-CM Yellow QMS-CM Green QMS-CM, Red XHS, Red QHS-CM, Black QMS-AS
Blue EHS Green EHS Red EHS
Pearl SRT, Premium A36S, — — AC30S Premium C36S, —
Silver Line A30R Silver Line C24R
Pferd A 24 R SG A 24 Q SG-RAIL A 24 Q SG-RAIL AC 24 Q SG C 24 R SG —
Sait A24R, A30S, XFC Brute Hobo Ductile C24R Big M.A.C, XFC
Tyrolit A30P, A30BF — — AC24, AC30BF 1C24, C30BF —
Virginia Abrasives Metal — — Ductile Concrete Asphalt
Walter A-24 — — — — —

AVAILABILITY

TIER: GOOD GOOD GOOD GOOD GOOD

TRADENAME: METAL HD METAL METAL DECKING RAIL STEEL RESCUE
SHAPE: Type 01 Type 01 Type 01 Type 01 Type 01
ABRASIVE: Aluminum Oxide Aluminum Oxide Aluminum Oxide Aluminum Oxide Aluminum Oxide
REINFORCING: 3 layers 2 layers 2 layers 2 layers 2 layers
MATERIAL:

SIZE MAX. STD.

(D X T X H) RPM PKG. PART NO. PART NO. PART NO. PART NO. PART NO.

TYPE 01 CUT-OFF – FOR GAS & ELECTRIC-POWERED SAWS

12 x 1/8 x 1" / 20mm 6,360 10 66252836708 70184680310
14 x 1/8 x 1" / 20mm 5,400 10 66252835386 70184680317 6625832521 66243578262
14 x 1/8 x 1" 5,400 10 66253260462
16 x 1/8 x 1" / 20mm 4,800 10 6625830886
16 x 1/8 x 1" 4,800 10 66253259935

TIER: GOOD GOOD GOOD GOOD GOOD

TRADENAME: DUCTILE HD DUCTILE CONCRETE HD CONCRETE ASPHALT
SHAPE: Type 01 Type 01 Type 01 Type 01 Type 01
ABRASIVE: Silicon Carbide Silicon Carbide Silicon Carbide Silicon Carbide Silicon Carbide
REINFORCING: 3 layers 2 layers 3 layers 2 layers 2 layers
MATERIAL:

SIZE MAX. STD.

(D X T X H) RPM PKG. PART NO. PART NO. PART NO. PART NO. PART NO.

TYPE 01 CUT-OFF – FOR GAS & ELECTRIC-POWERED SAWS

12 x 1/8 x 1" / 20mm 6,360 10 70184680314 66252836709 70184680312 70184670243
14 x 1/8 x 1" / 20mm 5,400 10 66252835388 70184680321 66252835387 70184680319 70184672877
16 x 1/8 x 1" / 20mm 4,800 10 70184623029

www.nortonabrasives.com 25
 WALK-BEHIND MACHINES USED
REINFORCED CUT-OFF
CATEGORY DEFINITION
These powerful, self-propelled machines are designed to cut concrete slabs and asphalt
and are normally fitted with diamond blades. For inexperienced operators or small jobs,
the machines can accommodate low initial cost, conventional abrasives wheels.

APPLICATIONS: Cutting straight sections of concrete surfaces

SIZE RANGE: 14" and 18" diameter
THICKNESS RANGE: 3/16" – 3/8"
ABRASIVE GRAIN: Silicon Carbide
SHAPE: Type 01 Straight
BOND: Hot Pressed (HP) – for higher horsepower machine applications where
additional durability is needed, may be used wet or dry
Cold Pressed (CP) – for lower horsepower machines, which need a
free-cutting wheel
ARBOR: All are 1" with a drive pin

CROSS REFERENCE GUIDE

SPECIALTY

BETTER GOOD GOOD

Norton Norton Norton
Asphalt / Green Concrete – HP Asphalt Concrete
Abmast — C 16 T. Kompetitor Asphalt/Concrete C 24 R
Bullard Blaze & Road Warrior — C16R & T, C16R3 —
Camel — C16-U C24-R
Flexovit HPC16AG C16 G.P. C16UB C20SB/C16TB
Husqvarna Red GC-7A Black EWC Gold RTC, Blue RTC, Blue EWC
Pearl — — Premium C36S, Silver Line C24R
Pferd — C 24 R SG ASP C 24 R SG GP
Sait Street Runner C16 C24R, Street Walker
Tyrolit Concrete/Asphalt CHP Asphalt CP Concrete CP
Virginia Abrasives — GC/Asphalt Concrete
Walter — — C-24

AVAILABILITY

TIER: BETTER GOOD GOOD

TRADENAME: ASPHALT – HP ASPHALT – CP CONCRETE
SHAPE: Type 01 Type 01 Type 01
ABRASIVE: Silicon Carbide Silicon Carbide Silicon Carbide
BOND: Hot Pressed Cold Pressed Cold Pressed
MATERIAL:

SIZE (D X T X H) MAX. RPM STD. PKG. PART NO. PART NO. PART NO.

TYPE 01 CUT-OFF – FOR WALK-BEHIND SAWS

14 x 3/16 x 1 Pin Hole 4,365 10 70184670100 70184680324 70184680323
14 x 1/4 x 1 Pin Hole 4,365 5 70184670099 70184670535 70184670533
18 x 1/4 x 1 Pin Hole 4,250 5 70184670103 70184670098
18 x 3/8 x 1 Pin Hole 4,250 5 70184648998

For higher-production applications, that require optimum speed of cut and product life, please see our complete selection of walk-behind diamond
blades in our Diamond, Abrasives and Equipment for the Construction Market Catalog #7719 found on www.nortonconstructionproducts.com.

26 NORTON – THE MUSCLE BEHIND THE MACHINE

CHOP SAW CUT-OFF

www.nortonabrasives.com 27
 CHOP SAW MACHINES USED
REINFORCED CUT-OFF
CATEGORY DEFINITION
A chop saw is a light, low horsepower portable machine. Although very similar to a
compound miter saw, it is designed for cutting denser materials, like metal bar, tubing or
pipe. Chop saw cut-off wheels are designed specifically for this machine with finer grit,
softer grades, and reinforcement layers that match the application.

APPLICATIONS: Cutting small diameter metal pieces, bar stock, metal pipe, tubing,
decking, cable, drywall studs, and metal plate dimensioning
SIZE RANGE: 10" - 16" diameter
THICKNESS RANGE: 7/64"
ABRASIVE GRAIN: Zirconia Alumina/Aluminum Oxide Blend, Aluminum Oxide,
Silicon Carbide
SHAPE: Type 01 Straight
REINFORCEMENT TYPE: Side reinforced, centrally reinforced

CROSS REFERENCE GUIDE

TOTAL PERFORMANCE INITIAL PRICE SPECIALTY

BETTER GOOD GOOD

Charger Charger Charger Gemini Gemini Gemini Stud Gemini
Fast Cut Rapid Cut Long Life Fast Cut Rapid Cut Long Life Cutter Aluminum Masonry
Brilliant — — — Super-G Tube/Pipe — Drywall Stud Aluminum —
Bullard ZA36T — — TA36T A36R A36R Ironmaster A46T Studmaster AL36R —
A46T The Competitor
The Competitor
Camel — — ZA24-S A36-P, WA36-P — A36-S A30-R Mr. Stud A30-N —
Dewalt — — XP GP, Stainless — Stud Cutting — —
Fabrication
Flexovit — — — A30R Fast Cut — A30S Long Life A30T Drywall Stud —
A30-Q Free Cut
Makita — — — — General Purpose — — — —
Pearl SRT36 — — A36P Premium A30P Silver Line A46S Stud Cutting —
Pferd — — — A 36 K SG CHOP PSF CHOP A 36 K SG-STUD — C 36 K SG-CHOP
Sait Saitech Z-tech — EZ-Chop EZ-Chop Attacker Iron Worker Stud King Aluminum —
Steel Worker
Walter — — — — A-30 A-30-HC+ — A30-ALU —

APPLICATION-TO-PRODUCT RECOMMENDATION GUIDE

WHEEL TYPE/REINFORCEMENT
TYPE 01 STRAIGHT SIDE
REINFORCED CUT-OFF WHEEL
Side reinforced wheels have two full layers of reinforcing and are designed for a fast cut and the most
aggressive applications. All Purpose, Fast Cut, and Long Life are side reinforced.

TYPE 01 STRAIGHT CENTRALLY

REINFORCED CUT-OFF WHEEL Centrally reinforced wheels have a single layer of reinforcing with exposed rough sides for free-cutting,
non-binding applications where minimal burr and burn are the key requirements. Rapid Cut wheels are
centrally reinforced.

HOW TO PICK THE RIGHT BOND TYPE

All Purpose UNMARKED Where an excellent blend of cut rate and life is needed
Fast Cut FC Used when fast cutting is desired or when cutting pieces with larger cross sections
Long Life LL Where durability is needed due to severe application, and when cutting parts with small cross sections
Rapid Cut RC Where a free cutting, non-binding wheel is needed for burn-free and burr-free cuts
High- STUD High-performance aluminum oxide/resin bond combination designed for cleaner cuts and longer life when
Performance cutting steel studs
Aluminum ALU Specially formulated bond for reduced loading/surface contamination when cutting aluminum/soft materials

28 NORTON – THE MUSCLE BEHIND THE MACHINE

 CHOP SAW MACHINES USED
REINFORCED CUT-OFF
FEATURED PRODUCTS

CHARGER CHOP SAW REINFORCED CUT-OFF WHEELS

BETTER CHOICE FOR STEEL, STAINLESS STEEL AND ALL OTHER FERROUS METALS
FEATURES BENEFITS
• Zirconia alumina/aluminum oxide • 2X the life and cut rate of aluminum oxide
abrasive blend
• Fast Cut: side reinforced • Engineered for larger cross-sections and/or hard-to-cut materials
• Long Life: side reinforced • Ideal for small cross-section workpieces
• Rapid Cut: centrally reinforced, rough sides • Free cutting, non-binding; burr- and burn-free cuts

GEMINI CHOP SAW REINFORCED CUT-OFF WHEELS

GOOD CHOICE FOR ALL STEEL AND FERROUS METALS AS WELL AS SPECIALTY APPLICATIONS
IN ALUMINUM
FEATURES BENEFITS
• Fast Cut: side reinforced • Engineered for larger cross-sections and/or hard-to-cut materials
• Long Life: side reinforced • Ideal for small cross-section workpieces
• Rapid Cut: centrally reinforced, rough sides • Free cutting, non-binding; burr- and burn-free cuts
• Aluminum: specially formulated bond for • Free cutting; resist loading
aluminum and other soft, nonferrous • No surface contamination
metals; no wax or rubber fillers

METAL STUD CUTTER CHOP SAW REINFORCED CUT-OFF WHEELS

GOOD CHOICE FOR DRYWALL STUDS
FEATURES BENEFITS
• Stud Cutter: thin, side-reinforced; with • Designed specifically for cutting steel studs
high-performance aluminum oxide abrasive

AVAILABILITY

TIER: BETTER BETTER GOOD GOOD GOOD GOOD

TRADENAME: CHARGER CHARGER GEMINI GEMINI METAL MASONRY
SHAPE: Type 01 Type 01 Type 01 Type 01 Type 01 Type 01
ABRASIVE: Zirconia Alumina/ Zirconia Alumina/ Aluminum Oxide Aluminum Oxide Aluminum Oxide Silicon Carbide
Aluminum Oxide Aluminum Oxide
REINFORCEMENT: Side Central Side Central Side Side
MATERIAL: STAINLESS STAINLESS STAINLESS STAINLESS STAINLESS MASONRY
STEEL / METAL STEEL / METAL STEEL / METAL STEEL / METAL STEEL / METAL

SIZE (D X T X H) MAX. RPM STD. PKG. PART NO. PART NO. PART NO. PART NO. PART NO. PART NO.
TYPE 01 STRAIGHT CUT-OFF
10 x 7/64 x 1 6,110 10 66253106109 LL
12 x 7/64 x 1 5,095 10 66253207552 66253207554 LL 66253214561 RC
14 x 7/64 x 1 4,365 10 66253306624 LL 66253309614 RC 66253306627 FC 66253313588 RC 07660789405 STUD
10 66253306625 LL 66253306626 LL
10 66253314816 ALU
25 07660703970
5 07660789402
16 x 7/64 x 1 3,820 10 66253410196 FC 66253410198 LL
66253410197 LL

DEPRESSED CENTER DESCRIPTION CODES

FC = FAST CUT LL = LONG LIFE RC = RAPID CUT ALU = ALUMINUM STUD = STUD CUTTER
■ = STAINLESS ■ = STEEL / METAL ■ = MASONRY

www.nortonabrasives.com 29
 STATIONARY SAW MACHINES USED
REINFORCED CUT-OFF
CATEGORY DEFINITION
The Norton stationary saw reinforced cut-off wheel line consists of Type 01 straight
10" - 24" wheels, designed to fit on fixed-base stationary saws that are free-standing or
mounted on a workbench.
APPLICATIONS: Primary applications are cutting of all metal parts (flat stock, bars,
studs, pipes, tubes, angle iron, cable), wire rope and hydraulic hose
used in fabrication, construction and plant maintenance.
SIZE RANGE: 10" – 24" diameter
THICKNESS RANGE: 3/32", 1/8", 5/32", 3/16"
ABRASIVE GRAIN: Zirconia Alumina/Aluminium Oxide Blend, Aluminum Oxide,
Silicon Carbide
SHAPE: Type 01 Straight

CROSS REFERENCE GUIDE

TOTAL PERFORMANCE INITIAL PRICE SPECIALTY

BETTER GOOD GOOD

Charger Gemini Gemini Gemini Norton
Fast Cut Long Life Rapid Cut* Masonry Foundry Cut**
Abmast Z 24 R3 A 30 R — — — AC 24 R3
Brilliant — GP Fast Cut GPX Long Life XL , XLX — —
Bullard — A30-R A30-T A30O C20R —
Camel ZA24-R A24-R, A46-T — — C24-R WA24-S
Flexovit — A30RB Multi Purpose A30SB Long Life, — C24RB AC24PB Heavy Duty
A24TB Long Life
Metabo — A30N, A30R A30S, A30V — C30S —
Pearl SRT36 A30P Premium, A30S Premium, — C24 Silver Line —
A30Q Silver Line A36R Premium
Pferd ZA 24 Q/R SG-HD A 24 N/P SG-HD A 24 Q/S SG-HD — C 24 0 SG —
Sait — A24N, A36R A24R — C24R —
Tyrolit — A30BF — — C30BF —
Walter — A-24-FC A-24-RIP — — —
* FOR BURR-FREE APPLICATIONS, PLEASE REFER TO GEMINI RAPID CUT WHEELS IN CHOP SAW CUT-OFF WHEEL SECTION OR AT WWW.NORTONABRASIVES.COM
** FOR FOUNDRY AND OTHER PRODUCTION CUT-OFF WHEELS, PLEASE REFER TO THAT SECTION OF THE NORTON FULL LINE CATALOG #7362 OR AT WWW.NORTONABRASIVES.COM

AVAILABILITY

TIER: BETTER GOOD GOOD GOOD

TRADENAME: CHARGER GEMINI GEMINI MASONRY
FAST CUT LONG LIFE
SHAPE: Type 01 Type 01 Type 01 Type 01
ABRASIVE: Zirconia Alumina/ Aluminum Oxide Aluminum Oxide Silicon Carbide
Aluminum Oxide
MATERIAL: STAINLESS STAINLESS STAINLESS MASONRY
STEEL / METAL STEEL / METAL STEEL / METAL

SIZE (D X T X H) MAX. RPM STD. PKG. PART NO. PART NO. PART NO. PART NO.

TYPE 01 STRAIGHT CUT-OFF

10 x 3/32 x 5/8 6,110 10 66253106108 66253106101 66253106102 07660789391
12 x 1/8 x 1 5,095 10 66253207550 66253207547 66253207548 07660789350
14 x 1/8 x 1 4,365 10 66253306623 66253306609 66253306611 07660789353
16 x 1/8 x 1 3,820 10 66253422942 70184623029
16 x 5/32 x 1 3,820 10 66253410194 66253410183 66253410184
18 x 5/32 x 1 3,015 10 66253410185
20 x 5/32 x 1 2,710 5 69078609045 FC 69078609031 69078609032
5 69078609046 LL
20 x 3/16 x 1 2,710 5 69078609033 69078609034
24 x 3/16 x 1-3/4 2,260 5 61463650196

DEPRESSED CENTER DESCRIPTION CODES

FC = FAST CUT LL = LONG LIFE BLANK = ALL PURPOSE
■ = STAINLESS ■ = STEEL / METAL ■ = MASONRY

30 NORTON – THE MUSCLE BEHIND THE MACHINE