HYVA CYLINDER

715 36 392
Front end cylinder with eye type FE 169-4-05180-011A-K1604
tipping weight 50-83 ton
page # 1 / 2 closed length (K) 1599-1634 mm

front & side view cylinder 1 2

A mm
R Z B 245 224 mm

Y
C 191 mm
D mm
E mm

M*
F mm
G* mm
H* 1657 mm
I 65 mm
J 106 mm
H*

K* 1604 mm
K*

L 290 mm
M* 100 mm
N mm
O mm
P mm
T max. 29o C Q mm
R 53 mm
ØU

S 127 mm
L

T 1" SAE
U 60 mm
S V 65 mm
J

W mm
B2 V B1 X mm
Y 50 mm
Z 42 mm
*incl.20[ -5;30] pull out on piston

specifications technical notes

weight cylinder only 227 kg This cylinder is a lifting device only and may not be used as
total volume 88 L structural member or be subject to side load. Working pressure
working volume 81 L depends on application; never exceed maximum pressure.
maximum pressure 190 bar Cylinder painted with Akzo Air drying Enamel (RAL9005).
maximum pump flow 190 L/min Max duration of extension 2 hours (excluded HC). See mounting
maximum cylinder angle to front 30 ° instruction CYL-0019. See oil specification sheet OIL-0002.
maximum thrust first stage** 35 ton See bracket specification sheet 015BRA01.
**when cyl. mounted at a large angle, thrust first stage may become too high: see Hyva Tipper Program
extension 1 2 3 4 5 6 7 8 9
effective diameter [mm] 169 149 129 110 total
stroke [mm] 1280 1300 1300 1300 5180

tipping weight
tipping weight at maximum pressure of 190 bar and C is 158 mm
BL (body length); BL 6800 6600 6400
OH (rear overhang);
OH 200 500 800 200 500 800 200 500 800
X=Ycog (vert. pos. centre
of gravity); At 46 48 51 48 50 53 49 52 55
Qo (pivot length); Ycog
C (bracket length);
At 600 50 54 61 51 56 63 52 58 66
X

Qo O H At = stroke x 60 / Qo 900 54 60 68 55 62 72 57 65 76
C BL
1200 58 66 77 60 69 83 63 73
Subject to change without notice. DO-E 71536392 / 06-11-09 / RV AC
 HYVA CYLINDER
715 36 392
Front end cylinder with eye type FE 169-4-05180-011A-K1604

page # 2 / 2
110 123
111
112
40 102
30 103
0 20

101
41
31
21
1 104
105
42 106
43 107
32 108
44
22 33
2 34
23
3
24
4
5
6

Spare part list Spare part list

Pos Part no. Description Qty. Pos Part no. Description Qty.

0 71802191 K PACKSET 191 01 730 40 71802129 K PACKSET 129 01

1 72507512 BASE 191-1559-4/4SAE-290 01 840 41 72604510 STAGE 129-1520 01
2 71870040 K SEAL BOTTOM PLATE 191 01 42 NOT APPLICABLE
3 71821191 BOTTOM PLATE 191 01 340 43 71807129 K SLIDER 129 (2 X 1/2) 02
4 71820191 LOCKING PLATE 191 03 630 44 71812129 K LIFTRING 129 01
5 01732559 K SPRING WASHER M8 SET 01
6 01732055 K BOLT M8 X 1.25 X 20 SET 01
800 101 72403511 PISTON S 110-1525-HC 01
50 102 71875010 PIN ROUND HEAD GROOVED 6x15 mm 01
20 71802169 K PACKSET 169 01 40 103 71870120 K O-RING PISTON TOP 110 01
21 72606510 STAGE 169-1520 01 330 104 71807110 K SLIDER 110 (2 X 1/2) 01
22 71811169 K STOPRING OUTER 169 01 330 105 71807110 K SLIDER 110 (2 X 1/2) 01
23 71807169 K SLIDER 169 01 60 106 71870220 O-RING PISTON BOTTOM 110 01
24 71813169 K LIFTRING 169 01 70 107 71822110 BOTTOM PLATE PISTON 110 01
80 108 71814110 SNAPRING FOR PISTON 110 01
30 110 71835110 PISTON EYE SPH. 110 MACHINED 01
30 71802149 K PACKSET 149 01 10 111 71875450 SPHERICAL EYE D.50 MAINT. FREE 01
31 72605510 STAGE 149-1520 01 20 112 01770560 CIRCLIP GE 50 DO 01
32 71811149 K STOPRING OUTER 149 01 230 123 71838960 DUST COVER FE 149-169 YELLOW COLOUR 01
33 71807149 K SLIDER 149 01 240
34 71812149 K LIFTRING 149 01 230

Seal kit complete:

Part no. Description

71901640 K Seal kit complete:

consists of all packsets with packset
grease, O-rings and Pin (pos.102)

Subject to change without notice DO-E 71536392 / 06-11-09 / RV AC