1ab367c9 PDF

MOV1 MOV1A MOV1B
A B A B A B
A1 B1 A1 B1 A1 B1
Industrial hydraulic valve 工业液压阀
Hanshang Hydraulic
特性曲线（在使用 HLP46 , 油=40℃±5℃时测得）

PBD型直动式溢流阀
Characteristic curves（measured with HLP46，Voil=40℃±5℃）
PBD DIRECT OPERATED
PRESSURE RELIEF VALVES Size 6 Size 8 & 10
符号 SYMBOL
Catalogue 2017
Operating pressure
Operating pressure
压
力
T 阀
Flow in Flow in
PBD型溢流阀是直动式座阀，用以限制系统压力，其 PBD series relief valves are direct operated poppet type used to limit pressure
Pressure Control Valves

结构可分为锥阀（压力至40Mpa）和球阀结构，压力等级分 in a hydraulic system. The design can be divided into poppet (Max.40Mpa)
别为2.5；5；10；20；31.5；40。 and ball type. There are six pressure adjustment ranges available 1 = Min adjustable pressure
该阀体积小、结构紧凑、流量特性好、噪音小、压力 2.5;5;10;20;31.5;40Mpa. It has characteristics of compact structure,high

Size 15 & 20 Size 25 & 30
稳定、广泛应用在小流量系统中，可作为安全阀及遥控阀 performance, reliable work, low noise and long service life. These series
等。 are widely applied to many lower flow systems, can be also used as relief
valve and remote control valve, etc.
Operating pressure
Operating pressure
技术参数 Technical data
通径 Size 6 8 10 15 20 25 30
工作压力(Mpa) Operating pressure(Mpa) 31.5
最大流量(L/min) Max .flow rate(L/min) 35 60 80 150 200 250 300
介质温度(℃) Fluid temperature(℃) -20～70
过滤精度(µm) Filtration accuracy(µm) 25 Flow in Flow in
PBD K 0.4 0.5 0.9 2.1

重量(千克)
PBD G 1.6 3.6 3.6 6.9 6.9 15.2 15.2
Weight(KGS)
PBD P 1.7 3.7 7.1 15.7
阀体（材料）表面处理钢件表面发黑处理
Valve body（Material）Surface treatment Steel Body Surface Black Oxide
NAS1638 9级和ISO4406 20/18/15级

油液清洁度/Oil cleanliness
NAS1638 class 9 and ISO4406 class 20/18/15 Attention！
The curves are available when output pressure =0 within the The curves are ralated to setting pressure level (like
flow ranges，and the pressure differential of housing is not 200bar.).The increased pressure data will be higher when
considered when measures. relief flow rate added.
The curves are only available for the said environment and
temperature conditions,and the effect of boundary variation
conditions for characteristic curves must be considered.
02 www.nshpv.com 03
Hanshang Hydraulic
PBD*K插入阀连接尺寸 PBD*K Dimensions for cartridge L

L1 L2
PBD*G 2- D1
2-D
3.2 P
P
α
D1
D2
4-D2
D
1.6 P
Catalogue 2017
T P
M1
A L6
M
2- D3 0.05 A
L5 D4
L4 压
L3 力
L2 阀
L1
L L3 T
L4

通径 Size D D1 D2 D3 D4 L L1 L2 L3 L4 L5 L6 α
6 M28x1.5 25H8 15 6 6 65 56.5±1 45 35 30 19 15 15° D
通径 Size L L1 L2 L3 L4 M M1 D1 D2
10 M35x1.5 32H8 18.5 10 10 80 67.5±1 52 41 35 23 18 15° 英制 Inch 公制 Metric
20 M45x1.5 40H8 24 20 20 110 91.5±1 70 54 45 27 21 20° 6 G 1/4" M14×1.5 80 15 55 20 40 60 45 25 M6/15
30 M60x2 55H8 38.75 30 30 140 113.5±1 84 60 45 29 23 20° (8)10 (G 3/8") G1/2" (M18X1.5) M22X1.5 100 20 70 21 49 80 60 (28) 34 M8/15
(15)20 (G 3/4") G1" (M27X2) M33X2 135 20 100 34 65 100 70 (42) 47 M8/22
(25)30 (G1 1/4") G1 1/2" (M42X2) M48X2 180 25 130 35 85 130 100 (56) 61 M10/22
安装尺寸/Installation dimensions
L PBD S 6 K 10 10 * *
PBD*P
L1 L2
4-D2 2- D3
型号：直动式
T P
S＝带保护罩的调节螺栓
M1
M
无=丁晴橡胶
H= 带手轮 V=氟橡胶
No code=NBR seals
V=FPM seals
通径 6(8)10(15)20(25)30 无=英制；2＝公制
No code=lnch thread;2=metric
L3
压力等级(兆帕)：2.5；5；10；20；31.5；40
L4 K＝插入式；G＝管式；P＝板式
Pressure range(MPa):2.5;5;10;20;31.5;40
K＝Cartridge valve
系列号10系列(压力等级2.5～40 MPa)
Series No.10 (Pressure rating2.5～40 MPa)
通径 Size L L1 L2 L3 L4 M M1 D2 D3
6 80 15 55 20 40 60 45 M6/15 6
10 100 20 70 21 45 80 60 M8/15 10
20 135 20 100 34 65 100 70 M8/22 20
30 180 25 130 35 85 130 100 M10/22 30
04 www.nshpv.com 05
Hanshang Hydraulic

PB/PBW型60/6X系列溢流阀
PB/PBW 60/6X SERIES PILOT OPERATED
PRESSURE RELIEF VALVES Characteristic of Min.Setting Pressure.bypass pressure and flow
Standard
符号 SYMBOL
Catalogue 2017
PBW...A...6X/... PBW...A...6X/...X PBW...A...6X/...Y PBW...A...6X/...XY
A A A A
X X
Min.Setting/Bypass Pressure
B B Y
B
Y
B
压
PBW...B...6X/... PBW...B...6X/...X PBW...B...6X/...Y PBW...B...6X/...XY 力
A A A A 1.通径 10 Size 10 阀
X X
2.通径 20 Size 20
B
B Y
3.通径 30 Size 30
B Y B
PB...6X/... PB...6X/...X PB...6X/...Y PB...6X/...XY

A A A A

Flow in
B B X B Y BX Y
Charaterastics of Min.Setting Pressure.bypass presure and flow

PB型阀是先导控制式的溢流阀。PBW型是先导控制式 PB is pilot operated pressure relief valve, PBW is a pilot operated solenoid Type ''U''
的电磁溢流阀是用于控制液压系统的压力，并能在任意时刻 relief valve available to unload system pressure.
使系统卸荷。 The performance of 6X series is superior than 60 series, the 6X series can be
6X系列PB/PBW型阀，性能优于60系列PB/PBW，具 used to control the pressure of hydraulic systems smoothly in a wide range.
有更平稳的调压性能，更低的最低调节压力和调压范围大， This type is suitable for a hydraulic system which demands high flow rate.
通流能力更强等特点。
Min.Setting/Bypass Pressure
1.通径 10 Size 10
技术参数 Technical data 2.通径 20 Size 20
3.通径 30 Size 30
通径 Size 10 20 30
系列号 Series No 60 6X 60 6X 60 6X
工作压力(Mpa) Operating pressure(Mpa) 31.5 35 31.5 35 31.5 35
Flow in
最大流量(L/min) Max .flow rate(L/min) 200 250 400 500 600 650
过滤精度(µm) Filtration accuracy(µm) 25
重量(千克) PB 3.2 4.2 5.2

Weight(KGS) PBW 4.7 5.5 6.8
阀体（材料）表面处理 Attention！
铸件表面磷化处理 casting phosphating surface
Valve body（Material）Surface treatment The curves is measured without pressure when The curves are available when the output
NAS1638 9级和ISO4406 20/18/15级 control oil back to the tank. pressure Pt=0 within the flow ranges.
NAS1638 class 9 and ISO4406 class 20/18/15 Refers to the back into housing of the control oil,the
pressure of “T” port has increased against the
input pressure.
06 www.nshpv.com 07
Hanshang Hydraulic
特性曲线（在使用 HLP46 , 油=40℃±5℃时测得）板式底板安装尺寸 Subplate mounting 管式连接尺寸 Threaded connections

141
Characteristic of inlet Pressure and flow

Catalogue 2017
D2
D1
力
Inlet pressure
H3
2- D3
H1
H2
1.通径 10 Size 10
D1
2.通径 20 Size 20 D2

3.通径 30 Size 30 L2 L1
L
Flow in
Attention！板式底板安装尺寸 Subplate mounting

The curves is measured without pressure when control oil back to the tank.
Refers to the back into housing of the control oil,the pressure of “T” port
has increased against the input pressure.
型号 Model L L1 L2 L3 L4 L5 B B1 D E1 E2
PB/PBW10 90 23.5 54 47.6 22.2 0 78 54 M12/26 Φ6 Φ12
PB/PBW20 117 34 66.7 55.6 11.1 23.8 100 69.8 M16/26 Φ6 Φ25
PB/PBW30 148 41.5 88.7 76.2 12.7 31.7 115 82.5 M18/26 Φ7 Φ32

管式连接尺寸 Threaded connections
Pilot flow
D1
型号Model D2 D3 L L1 L2 H H1 H2 H3
公制 Metric 英制 Inch
PB8G M18×1.5 G 3/8" 28 9 85 14 62 125 27 10 62
Inlet pressure
PB10G M22×1.5 G 1/2" 34 9 85 14 62 125 27 10 62

PB15G M27×2 G 3/4" 42 9 85 14 62 125 27 10 62
PB20G M33×2 G 1" 47 9 85 14 62 125 27 10 57
1.通径 10 Size 10 PB25G M42×2 G 1 1/4" 56 9 100 18 72 138 40 13 66
2.通径 20 Size 20 PB30G M48×2 G 1 1/2" 61 9 100 18 72 138 40 13 66
3.通径 30 Size 30
Pilot flow
08 www.nshpv.com 09
Hanshang Hydraulic
PB W 10 * * 1 60 31.5 * * DC24 N Z5L * * PBE/PBEK型比例溢流阀

PBE/PBEK TYPE PROPORTIONAL
无=丁晴橡胶
PRESSURE RELIEF VALVES
V=氟橡胶
No code=NBR seals
型号 V=FPM seals
Catalogue 2017
无＝不带换向阀
W＝带换向阀符号 SYMBOL
压
A
A
力
阀
X
B Y B Y
PBE...Y PBE...XY
管式：8;10;15;20;25;30
15; 电压 Voltage AC220;DC24 PBE型阀是座阀结构的先导式溢流阀，用这种阀，系统压力可 PBE type valve is a pilot operated pressure relief valve with poppet

随电气输入信号，连续改变，压力的极限由磁铁设定，与电流 structure, which can change the system pressure continuously by electrical
有关。PBEK型溢流阀，在PBE型溢流阀基础上加装一个弹簧 input signal, the pressure limit can be preset by proportional solenoid
加载的压力溢流阀，提供最高压力保护。 and may be relative with current. PBEK relief valve in the PBE-based,
cracking install a spring loaded pressure relief valve to provide maximum pressure
无＝先导控制油内供内排 protection.
X＝先导控制油外供内排
带手轮
Y＝先导控制油内供外排
Hand wheel XY＝先导控制油外供外排
Sleeve with hexagon and protective cap No code＝Internally pilot, internally drained 安装尺寸详见第9页 Installation dimensions refer to page 9
X＝Externall pilot, internally drained
Y＝Internally pilot, externally drained
压力等级 Pressure range (Mpa) 5;10;20;31.5 XY＝Externall pilot, externally drained
PBE K * 10 60 31.5 Y * * *
无=丁晴橡胶
NO code=Without max pressure protection
K=With max pressure protection V=氟橡胶
No code=NBR seals for petroleum oils
V=FPM seals for phosphate ester
（通径30）
No code=Inch thread; 2=Metric

No code=pilot operated pressure relief valve
C=Pilot valve with main spool assembly（NG30） Y=内部先导供制油内供外排
C=Pilot valve without main spool XY=内部先导供制油外供外排
T=Pilot operated valve as remote control valve Y=Internally piloted/externally drained
XY=externally piloted/externally drained
通径：10；20；30
Size:10;20;30 压力等级 Pressure rating 5=5MPa
10=10MPa
序列号 60 20=20MPa
Series number 60 31.5=31.5MPa
10 www.nshpv.com 11
Hanshang Hydraulic
安装尺寸 Installation dimensions

PB...K型插装式先导溢流阀
PB...K SERIES PLUG-IN PILOT CONTROLLED
PRESSURE RELIEF VALVES PB6K…/…Y PB10K…/…Y
30±0.3 35.5
+0.2
0
16±0.3 19.5±0.5
3 7max 3 10max
0.02 A 0.02 A
B
Y B Y
Catalogue 2017
A
A
符号 SYMBOL
20.5H8
20H8
1.6
23H9
17.5H8
M24X1
1.6
21.5H8
1.6
26H8
25H8
30
1.6
M12X1
25
3.2
A
3.2 A
3.2 1.6
压
25°
3.2 3.2
力
25°
25°
25°
25°
25°
3.2 +0.1
阀
1.2 0
1 +0.1
10 0
+0.1 +0.1
8 0 21 0
+0.2 +0.1
17 0 31 0
1.6
+0.2
27 42 0
35 52(配合深度)
43(配合深度) 55
45min
PB型溢流阀是插装式先导溢流阀，用于限制液压系统压力。 PB…K series are pilot operated relief valves used to limit pressure in a

hydraulic system.
PB20K…/…Y PB20K…/…X Y
48
37 18
30min 4 30min
°
20
20
B Y B
3.2
20°
M28X1.5
1.6
M28X1.5
29H8
3.2
21H8
22.5H8
30min
24+0.1
29H8
16
21H8
0
30
通径 Size 6 10 20 1.6 A 3.2
3.2
1.6 A
1.6 1.6
20°
20°
A A
调节压力(Mpa)Set pressure(Mpa) 至5，10，20，31.5/Up to 5，10，20，31，5 0.02 A 0.02 A

X
2.5 2.5
2.5
8 8
最大流量(L/min) Max .flow rate(L/min) 60 100 300
19 19 12
+0.2
54 2
介质温度(℃) Fluid temperature(℃) -20～70 0
28.5
+0.2
0
64(配合深度) +0.2
35
过滤精度(µm) Filtration accuracy(µm) 25 64.5
+0.2
0
0
+0.2
70 560
重量(千克) Weight(KGS) 0.22 0.3 0.35 64(配合深度)

+0.2
64.5 0
70
NAS1638 9级和ISO4406 20/18/15级

NAS1638 class 9 and ISO4406 class 20/18/15
PB 10 K 1 40 100 Y * *
型号附加说明
无=丁晴橡胶 V=氟橡胶
No code=NBR seals
Cartridge valve V=FPM seals
Y=先导控制油内供外排
XY=先导控制油外供外排(仅PB20K)
Y＝Internally pilot, externally drained
XY＝Externall pilot, externally drained
(Only for PB20K)
压力等级 Pressure rating
50=5 MPa 100=10 MPa 200=20 MPa 315=31.5 Mpa
12 www.nshpv.com 13
Hanshang Hydraulic
底板安装尺寸 Subplate Installation dimensions

PR型 60/6X系列先导式减压阀
PR TYPE60/6X SERIES PILOT
OPERATED PRESSURED
REDUCING VALVES
Catalogue 2017
符号 SYMBOL
B
B
压
力
阀
A Y A Y
PR..YM PR..Y
PR型减压阀是先导控制的减压阀，用于降低系统中某一回路 PR are pilot operated pressure reducing valves, which can be used to

的压力和需要平稳油源的回路。 reduce and maintain pressure in a certain circuit.
6X系列PR型阀与60系列PR型阀都具有相同的连接方式，相同 Although, 6X series and 60 series with same connection and pressure
通径 Size L L1 L2 L3 L4 L5 L6 B B1 D E PA/重量(千克) PAW/重量(千克) 的压力调节形式。6X系列PR型阀性能优于60型PR阀，其具有 control, the capability of 6X series is better than 60 series. The 6X have more
Weight(KGS) Weight(KGS)
更平稳的调压性能，在大流量情况下有较低的输出压力，通流 smoothly adjustable performance, it not only reaches the output pressure
10 94 16.6 7.1 35.7 42.9 62.7 / 84 66.7 4-M10/20 3-Φ10 3.8 5.3 能力和调压范围大的特点。 at low level under high flow rate, but also with the characteristics of high
20 158 14.3 11.1 55.6 66.7 100 112.7 103 66.9 6-M16/25 3-Φ25 7.9 9.4 flow and widely pressure adjustable ranges.
30 199 14.8 12.7 76.2 88.9 127 139.7 118.5 82.5 6-M18/25 3-Φ32 12.3 13.8
通径板式压力等级(Mpa) 重量(千克)
Size Subplate mounting Pressure range(Mpa) Weight(KGS)
PA W 10 A 1 60 80 Y DC24 N Z5L V *
10 10 5 10 20 31.5 35 4
型号 Model 附加说明 20 20 5 10 20 31.5 35 5.5
For further details 30 30 5 10 20 31.5 35 8.2
无＝不带电磁阀无=丁晴橡胶阀体（材料）表面处理
W＝带电磁阀 V=氟橡胶 Valve body（Material）Surface 铸件表面喷蓝漆 casting surface blue paint
No code=Without No code=NBR seals treatment
directional valve V=FPM seals
W=With directional valve Z5L=带灯的大方形插头 NAS1638 9级和ISO4406 20/18/15级
通径：10；20；30 Z5L=Large quadrate plug with light NAS1638 class 9 and ISO4406 class 20/18/15
Size=10;20;30 无＝没有故障检查按钮
N＝有故障检查按钮
No code=Without manual override
A=Normally closed;B=Normally open N=With manual override 通径/系列 Size/Series 10/6X 20/6X 30/6X
AC220=交流220V；DC24＝直流24V 流量(L/min) Flow rate(L/min) 150 300 400
1=Adjustable knob AC220=AC 220V;DC24=DC 24V 工作压力(Mpa) Operating pressure(Mpa) 至35/ To 35
2=Hexagonal nut and protective cap 进口压力(Mpa) Input pressure(Mpa) 至35/ To 35
无＝内供内排；Y＝内供外排
Series Number No code=Internally piloted,internally drained 出口压力(Mpa) Output pressure(Mpa) 1至35/1- To 35
Y=Internally piloted;externally drained 背压Y口(Mpa) Back pressure Y port(Mpa) 35(仅可用于不带单向阀结构)/35(Only used for without check valves)
介质温度(℃) Fluid temperature(℃) –20–70
过滤精度(µm) Filtration accuracy(µm) 25
16 www.nshpv.com 17
Hanshang Hydraulic

PZ60/6X 先导顺序阀
PZ60/6X PILOT-OPERATED
SEQUENCE VALVES
符号 SYMBOL
A A A A
Catalogue 2017
X X
B B B Y B Y
PZ..M PZ..XM PZ..YM PZ..XYM
A A A A 压
力
X X
阀
B B B Y B Y
PZ PZ..X PZ..Y PZ..XY
PZ型先导式顺序阀用来控制执行元件的先后动作顺序，以实 PZ type pilot-operated sequence valve is used to control the sequencing,

现液压系统的自动控制。该阀有两种连接形式和四种控制油 braking, unloading or other functions. The valve has two connection types
形式，通过改变控制油控制形式可得到不同的功能。 and four kinds of control methods of pilot oil, therefore, it has different
6X系列PZ型阀，性能优于60系列PZ型阀，具有调压平稳，调 functions by changing the control method of pilot oil. The 6X series PZ type
压范围大，通油能力强等特点。 valve has higher performance than 60 series, with smoothly adjustable
performance, widely adjustable range, high flow tare.
型号Model L L1 L2 L3 L4 L5 L6 L7 B B1 B2 B3 B4 B5 D E F
PR 10 96 34.5 7.2 21.5 / 21.5 35.8 42.9 85 9.15 7.9 33.35 58.8 66.7 4-M10/24 2-Φ6 2-Φ13
PR 20 112 37 11.1 20.6 / 39.7 49.2 60.3 102 11.3 6.4 39.7 73 79.4 4-M10/24 2-Φ6 2-Φ22 技术参数 Technical data
PR 30 140 31.3 16.7 24.6 42.1 59.5 67.5 84.2 120 11.6 3.8 48.4 92.8 96.8 6-M10/24 2-Φ6 2-Φ32
通径 Size 10 20 30
PR 10 1 60 10 Y M V * 最大流量(L/min) Max .flow rate(L/min) 150 300 450
阀体（材料）表面处理
铸件表面喷蓝漆 casting surface blue paint
Valve body（Material）Surface treatment
NAS1638 9级和ISO4406 20/18/15级

通径 10 20 30 无=丁晴橡胶
Size 10 20 30 V=氟橡胶
No code=NBR seals
V=FPM seals
1=Adjustable handwheel
2=Adjustable screw with protective cap
60=60 Series; 6X=6X Series

压力等级见表格
18 www.nshpv.com 19
Hanshang Hydraulic

DS型单向阀
DS SERIES CHECK VALVES
Catalogue 2017
符号 SYMBOL
方
向
阀
DS型单向阀的作用是使油液只能向一方向流动，而另一个 DS series check valves allow free flow in one direction and block flow in
Directional Control Valves

方向止流。 the counter direction

型号Model L L1 L2 L3 L4 L5 L7 B B1 B2 B3 B4 B5 D E F 重量(千克)
L6
Weight(KGS)
通径 Size 6 8 10 15 20 25 30
PZ10 96 34.5 7.2 21.5 / 21.5 35.8 42.9 85 9.15 7.9 33.35 58.8 66.7 4-M10/24 2-Φ6 2-Φ13 4
管式英制 Inch G1/4" G3/8" G1/2" G3/4" G1" G1 1/4" G1 1/2"
PZ20 112 37 11.1 20.6 / 39.7 49.2 60.3 102 11.3 6.4 39.7 73 79.4 4-M10/24 2-Φ6 2-Φ22 5.7
Threaded connection 公制 Metric M14X1.5 M18X1.5 M22X1.5 M27X2 M33X2 M42X2 M48X2
PZ30 140 31.3 16.7 24.6 42.1 59.5 67.5 84.2 120 11.6 3.8 48.4 92.8 96.8 6-M10/24 2-Φ6 2-Φ32 8.4
额定流量(L/min) Max .flow rate(L/min) 15 30 40 120 200 300 400
最高使用压力(MPa) Max .operating pressure(Mpa) 31.5
六角对边(mm) Distance across flats(mm) 19 24 30 36 46 60 63
长度(mm) Length(mm) 58 58 72 85 98 120 132
PZ 10 1 60 210 X M 2 V * 重量(千克) Weight(KGS) 0.1 0.2 0.3 0.5 1 2.1 2.5
型号 Model Valve body（Material）Surface treatment Steel Body Surface Black Oxide
通径:10=10;25=20;32=30
NAS1638 9级和ISO4406 20/18/15级
Size:10=10;25=20;32=30 油液清洁度/Oil cleanliness
1=Handwheel
2=Screw adjustment with protective cap For further details
管式安装尺寸 Threaded connection dimensions
无=丁晴橡胶
60=60 Series:6X=6X Series V=氟橡胶通径
L2
6 8 10 15 20 25 30
No code=NBR seals size
V=FPM seals G1/4＂ G3/8＂ G1/2＂ G3/4＂ G1＂ G1 1/4＂ G1 1/2＂
210=Max. adjustable pressure is 21Mpa D1
φD2
M14x1.5 M18x1.5 M22x1.5 M27x2 M33x2 M42x2 M48x2
D1
H1
D1
ΦD2 19 24 30 36 46 60 65
No code=Drain port with G1/4";
2=Drain port with M14X1.5 H1 21.5 27 34 40.5 53 69 75
T1 T1
No code=Internal pilot,internal drain L1 58 58 72 85 98 120 132 SW
L1
X=External pilot,internal drain
L2 1.5 1.5 1.5 1.5 1.5 1.5 1.5
Y=Internal pilot,external drain No code=With check valve
T1 12 12 14 16 18 20 22
XY=External pilot,external drain M=Without check valve
SW 19 24 30 36 46 60 65
20 www.nshpv.com 21
Hanshang Hydraulic
板式安装尺寸 Subplate dimensions

DSV/DSL型液控单向阀
DSV/DSL PILOT OPERATED
CHECK VALVES
Catalogue 2017
符号 SYMBOL
方
向
阀
DSV/DSL型液控单向阀只允许油液从正向通过，反向则截止， DSV/DSL pilot operated check valves allow free flow in one direction and

可用作保压。当接通控制口X时，压力油可反向流动。 block flow in the counter direction to maintain pressure. The oil is allowed
通径 Size B B1 L L1 L2 L3 L4 L5 D D1 DSV型为泄漏油内部回油；DSL型为泄漏油外部回油。 to flow in the counter direction when the X port is connected.
DSV is designed for internally drained. DSL is designed for externally
10 87 66.7 90 23.5 7.2 — 35.8 42.9 11 4-M10/20
drained.
20 110 79.4 120 23.4 11.1 — 49.2 60.3 22 4-M10/20
30 128 96.8 148 27.8 16.7 42.1 67.5 84.2 28 6-M10/20
通径(板式) Size DSV10 DSL10 DSV20 DSL20 DSV30 DSL30

DS 10 A 1 * *
X口控制容积(cm³) Port X pilot volume(cm ) 3
2.2 8.7 17.5
Y口容积(cm³) Port Y volume(cm ) 3
— 1.9 — 7.7 — 15.8
从A→B正向流通从B→A阀开启时反向流通
流动方向 Direction of flow
型号 Model Free from A to B;From B to A by opening
通径见表格工作压力(Mpa) Operating pressure(Mpa) 31.5

See the table for size 控制压力(MPa) Pilot control pressure range(MPa) 0.5-31.5
无=英制；2＝公制最大流量(L/min) Max .flow rate(L/min) 80 150 300
A=管式; No code=Inch thread;2=Metric
P=板式(只有10,20,30) 重量(千克) Weight(KGS) 2.5 2.3 4.3 4.6 8.5 9.2
A=Threaded connection 阀体（材料）表面处理钢件表面发黑处理
P=Subplate mounting Valve body（Material）Surface treatment Steel Body Surface Black Oxide
(only for size10,20,30)
NAS1638 9级和ISO4406 20/18/15级
22 www.nshpv.com 23
Hanshang Hydraulic
底板安装尺寸 Subplate mounting dimensions 管式连接尺寸 Threaded connection dimensions
仅用于/Only
T1 13
DSL10 L7=51.5
G1/4" (M14X1.5) H1
DSL(15)20 L7=72.5 1
L 25
L7 Y X
L6
L5
Catalogue 2017
L1 L4 仅用于/Only
10.5
A
2- D1
L3 DSL25,30
2-D2
Y
32.5
L5
L7
L2
L6
68.5
L4
B 方
L1
向
L3
Y
F
阀
L2
A B
B1
B4
B5
B
B2
B3
B2

E
X
型号Model 通径 size B1 B2 D1 D2 T1 H1 L1 L2 L3 L4 L5 L6
B1
10 66.5 85 34 G 1/2" M22X1.5 14 42 27.5 18.5 10.5 33.5 49 80
D
15 79.5 100 42 G 3/4" M27X2 16 57 36.7 17.3 13.3 50.5 67.5 95
DSV 20 79.5 100 47 G1" M33X2 18 57 36.7 17.3 13.3 50.5 67.5 95
25 97 120 56 G 1 1/4" M42X2 20 75 54.5 15.5 20.5 73.5 89.5 115
30 97 120 61 G1 1/2" M48X2 22 75 54.5 15.5 20.5 73.5 89.5 115
10 66.5 85 34 G 1/2" M22X1.5 14 42 22.5 18.5 10.5 33.5 49 80
通径 size L L1 L2 L3 L4 L5 L6 L7 B B1 B2 B3 B4 B5 D E F 15 79.5 100 42 G 3/4" M27X2 16 57 30.5 17.5 13 50.5 72.5 100
10 80 18.5 7.2 21.5 — 21.5 35.8 42.9 85 9.15 7.9 33.35 58.8 66.7 4-M10/24 2-Φ6 2-Φ13 DSL 20 79.5 100 47 G1" M33X2 18 57 30.5 17.5 13 50.5 72.5 100
20 95 17.5 11.1 20.6 — 39.7 49.2 60.3 102 11.3 6.4 39.7 73 79.4 4-M10/24 2-Φ6 2-Φ25 25 97 120 56 G 1 1/4" M42X2 20 75 54.5 15.5 20.5 84 99.5 125
30 115 15.5 16.7 24.5 42.1 59.5 67.5 84.2 120 11.6 3.8 48.4 92.8 96.8 6-M10/24 2-Φ6 2-Φ32 30 97 120 61 G1 1/2" M48X2 22 75 54.5 15.5 20.5 84 99.5 125
DS V 10 P A 1 30 2 V

For further details附加说明
V=泄漏油内部回油无=丁晴橡胶
L=泄漏油外部回油 V=氟橡胶
V=Internally drained(without drain port) No code=NBR seals for petroleum oils
L=Externally drained(with drain port) V=FPM seals for phosphate ester
无=英制；2=公制
通径 Size: 10/15/20/25/30
No code=Inch thread;2=Metric
P=板式:只有10,20,30；G=管式系列号
P=Subplate mounting(Only for size10,20,30) Series number
G=Threaded connection
开启压力 Cracking pressure
A=先导式；B=直动式 A=Pilot type; B=Direct type 1=0.3MPa; 2=0.5MPa; 3=0.8MPa
24 www.nshpv.com 25
Hanshang Hydraulic
机能符号 Spool symbols

DWG6型电磁换向阀
DWG6 SERIES SOLENOID
OPERATED DIRECTIONAL
CONTROL VALVES For example:
the spool symbol "E" with position "a"
Ordering code ...EA...
Catalogue 2017
方
向
阀

DWG6型方向控制阀是电磁铁操纵的换向阀，用以控制油液 DWG6 series directional control valves are solenoid operated directional
的开启、停止和换向。 spool valves ,these valves are used to the start ,stop and direct flow.
通径 Size 6
最大流量(L/min) Max.flow rate(L/min) 60
DWG6外型尺寸 DWG6 Subplate Installation Dimensions
A、B、P油口31.5 / A、B、P oil port 31.5
工作压力(MPa) Operating pressure(MPa)
T油口16 / T oil port 16
不带手柄/带手柄单头 1.6/2.2
Without Handle/With Handle
重量(千克) Weight(KGS) 双头 2.2/2.8 a b
83
特性曲线
Characteristic curves（measured with HLP46，Voil=40℃±5℃[104 ±9 ]）
2
3 3 1、阀固定螺丝：
p-q characteristic curves 4个M5X45 GB/T70.1-12.9级
Flow direction
机能符号
Spool symbol
74 拧紧扭矩Ma=8.9Nm
2、0型圈Φ12.3X1.9
152 3、用于1个电磁铁阀的堵头
152
1.Valve’s set screw
217
pressure differential
【psi】
4 of M5×45 GB/T70.1-12.9
Tightening torque Ma=8.9Nm.
69 2.O-ring φ12.3×1.9
4- 5.5 穿 Pylome 3.Plug screw for valves with one solenoid.
40.5 15
压降
32.5
31
47
A B
流量 Flow in（L/min【gpm】）
0.75
1
7.25
7 阀芯机能符号R处于控制位置B A 7 Spool symbol “R” in spool position B→A
8 阀芯机能符号G和T在中心位置 8 Spool symbol “G” and “T” in central position
9 阀芯机能符号H和T在中心位置P T 9 Spool symbol “H” and “T” in central position P→T
26 www.nshpv.com 27
Hanshang Hydraulic
DWG6-EL 外型尺寸 DWG6-EL Subplate Installation Dimensions
DWG10型电磁换向阀
15.2°
15.2°
DWG10 SERIES SOLENOID
CONTROL VALVES
Catalogue 2017
a
145
方
84.5
向
阀
74 74
272.3
69
7.25
4- 5.5穿Pylome
40.5 15 DWG10型方向控制阀是电磁铁操纵的换向阀，用以控制油液 DWG10 series directional control valves are solenoid operated directional

的开启、停止和换向。 spool valves,these valves are used to the start ,stop and direct flow.
T
32.5
31
47
A B
P
0.75
通径 Size 10
DWG6底板安装尺寸 DWG6 Subplate Installation Dimensions 最大流量(L/min) Max.flow rate(L/min) 120
66.5 A、B、P油口31.5 / A、B、P oil port 31.5
40.5 工作压力(MPa) Operating pressure(MPa)
27.8 T油口16 / T oil port 16
19
10.3 12.5 单头 4.6
重量(千克)
Z1DS6,Z2DS6,Z2FDS6,ZPB6,ZPR6
T Weight(KGS) 双头 6
安装尺寸相同
A B
32.5
26.55
0.75
31
44
Installations are the same with 铸件表面磷化处理 casting phosphating surface

16.25
P Valve body（Material）Surface treatment

Z1DS6,Z2DS6,Z2FDS6,ZPB6,ZPR6
NAS1638 9级和ISO4406 20/18/15级
5.95
5.75
4-M5/10 4- 7 NAS1638 class 9 and ISO4406 class 20/18/15

4 DWG 6 * E 60 * DC24 N Z5L * * * 特性曲线（在使用 HLP46 , 油=40℃±5℃时测得） Flow direction
Spool symbol

3=三油口
4=四油口附加说明
无=丁晴橡胶 V=氟橡胶 p-qv性能曲线 Characteristic curves
No code=NBR seals
V=FPM seals
1、无=不带手动换向模块无=无插装节流器 B0.8=节流孔径0.8
2、EL=带手动换向模块 B10=节流孔径1.0;B12=节流孔径1.2
1.No code=Without hand lever
2.EL=With hand lever
Z5L=带灯大方形插头
ZC=防水插头 JS=接线盒 on-positon
ZC=Waterproof connector 压降
JS=Wire box connector
N=有故障检查按钮;无=没有故障检查按钮流量 Flow in（L/min）
电压 Voltage N concealed
DC12;DC24 ;AC110;AC220 No Code Without concealed
28 www.nshpv.com 29
Hanshang Hydraulic
机能符号 Spool symbols DWG10底板安装尺寸 DWG10 Subplate Installation Dimensions

Catalogue 2017
Z1DS10,Z2DS10,Z2FDS10,ZPB10,
ZPR10 安装尺寸相同
Installations are the same with
Z1DS10,Z2SD10,Z2FDS10,ZPB10, 方
ZPR10 向
阀
4 DWG 10 E 30 * DC24 Z5L * * *
3=三油口
4=四油口

附加说明
通径 10 Size 10 无=丁晴橡胶 V=氟橡胶

No code=NBR seals
DWG10外型尺寸 DWG10 Subplate Installation Dimensions 机能符号 V=FPM seals
系列号 30=30螺纹连接电磁铁
无=无插装节流器 B0.8=节流孔径0.8
B10=节流孔径1.0;B12=节流孔径1.2
O=无复位弹簧;OF=带定位器;无=弹簧复位
电压 Voltage Z5L=带灯大方形插头
DC12;DC24 ;AC110;AC220
穿 Pylome
1、阀固定螺丝： 1.Valve’s set screw:

4个M6X40 GB/T70.1-12.9级 4 of M6×40 GB/T70.1-12.9
拧紧扭矩Ma=15.5Nm Tightening torque Ma=15.5Nm.
2、0型圈Φ16X1.9 2.O-ring φ16×1.9
3、用于1个电磁铁阀的堵头 3.Plug screw for valves with one solenoid.
30 www.nshpv.com 31
Hanshang Hydraulic
特性曲线：4DWHG10...型（在使用 HLP46 , 油=40℃±5℃时测得）

DWHG型电液换向阀
Characteristic curves：Type 4DWHG10...（measured with HLP46，Voil=40℃±5℃）
DWHG SERIES SOLENOID
PILOT OPERATED
p-qv性能曲线 Characteristic curves
DIRECTIONAL VALVES
Catalogue 2017
方
向
压降
阀
流量 Flow in（L/min）
Spool position Central position

Spool symbol Spool symbol
DWHG型电液换向阀是用电磁换向阀作为先导控制的滑阀式 DWHG series are solenoid pilot operated spool type valves . This series

换向阀，用于控制液流的通断和流动方向。 are used to control the start ,stop and direction of flow.
通径 Size 10 16 22 25 32
最高工作压力 P A B(MPa) Max operating pressure P.A.B(MPa) 31.5 35 31.5 35 35
控制油外排 Externally drained 31.5 25 25 25 25
T口(MPa) T Port (MPa) 交流(AC)-10 交流(AC)-10 交流(AC)-10 交流(AC)-10 交流(AC)-10
控制油内排 Internally drained
直流(DC)-16 直流(DC)-16 直流(DC)-16 直流(DC)-16 直流(DC)-16 特性曲线：4DWHG16...型（在使用 HLP46 , 油=40℃±5℃时测得）
交流(AC)-10 交流(AC)-10 交流(AC)-10 交流(AC)-10 交流(AC)-10 Characteristic curves：Type 4DWHG16...（measured with HLP46，Voil=40℃±5℃）
Y口(MPa) Y Port (MPa) 控制油外排 Externally drained
直流(DC)-16 直流(DC)-16 直流(DC)-16 直流(DC)-16 直流(DC)-16
最小控制压力 (MPa) Min. Pilot pressure(MPa) 0.45-1 0.45-1.3 0.45-1 0.45-1 0.45-1 p-qv性能曲线 Characteristic curves
最大流量(L/min) Max. flow rate(L/min) 160 300 450 650 1100

重量(千克) Weight(KGS) 6.7 9.5 12 18 38.5
NAS1638 9级和ISO4406 20/18/15级

压降
Spool position Spool position
Spool symbol Spool symbol
32 www.nshpv.com 33
Hanshang Hydraulic
特性曲线：4DWHG22...型（在使用 HLP46 , 油=40℃±5℃时测得）特性曲线：4DWHG32...型（在使用 HLP46 , 油=40℃±5℃时测得）
Characteristic curves：Type 4DWHG22...（measured with HLP46，Voil=40℃±5℃） Characteristic curves：Type 4DWHG32...（measured with HLP46，Voil=40℃±5℃）
p-qv性能曲线-机能符号E,R,W p-qv性能曲线-机能符号G,T
Characteristic curves-Spool E,R,W Characteristic curves-Spool G,T
Catalogue 2017
压降
压降
方
向
流量 Flow in（L/min）流量 Flow in（L/min）
阀
p-qv性能曲线-所有机能符号
Characteristic curves-All spool type
1) 仅用于机能符号 R
2) 不用于机能符号 R

1) Only applicable for spool R
2) Not applicable for spool R
压降
机能符号 Spool symbols

特性曲线：4DWHG25...型（在使用 HLP46 , 油=40℃±5℃时测得）
Characteristic curves：Type 4DWHG25...（measured with HLP46，Voil=40℃±5℃）
p-qv性能曲线 Characteristic curves

7 机能符号 G Spool symbol G

中位P - T Central position P - T
压降
8 机能符号 T Spool symbol T

中位P - T Central position P - T
Spool position Spool position Spool position

Spool symbol Spool symbol Spool symbol
Note:Only DWHG16 with S spool
34 www.nshpv.com 35
Hanshang Hydraulic
控制油内供与外供及内排与外排的说明 Pilot fluid supply 控制油内供与外供及内排与外排的说明 Pilot fluid supply
Main valve
Main valve
Catalogue 2017
Internal pilot
Cover
External pilot
DWHG25 型供排结构图方
DWHG10 型供排结构图
DWHG25 explanation partial drawing 向
DWHG10 explanation partial drawing DWHG16 explanation partial drawing 阀
DWHG32 explanation partial drawing
一、4DWHG10型二、4DWHG16型
1、内供与外供转换:主阀体顶上P孔中有M6螺钉 1、内供与外供转换：拆下右盖，将销3的小头朝

3为外供，拆下M6螺钉3为内供。向主阀内装成外供，将销3的小头朝外装成内供。
2、内排与外排转换:卸去螺塞1，装上M6螺钉2为 2、内排与外排转换：将主阀顶上螺塞1拆下，装
外排，拆下M6螺钉为内排。上M6螺钉2成外排，拆下M6螺钉2成内排。
三、4DWHG25型 3、4DWHG25
1、内供与外供转换：拆下端盖，装上M6螺 (1) Internal pilot and external pilot:
1、4DWHG10 2、4DWHG16 钉１外供，拆下M6螺钉２成内供。 Removing the sideward cover,installing M6
screw 1 is external pilot,unscrew the M6 screw
(1) Internal pilot and external pilot: (1) Internal pilot and external pilot: 2、内排与外排转换：将主阀顶上T孔中的M6
2 is internal pilot.
The“P”port with M6 screw 3 is external pilot,to Removing the sideward cover, installing the pin to 螺钉2拆下为内排，装上为外排。 (2) Internal drain and external drain:
convert valve into internal pilot, the M6 screw 3 allow “P” port with open position is internal pilot, to Removing the M6 screw 2 in the “T”port on the
must be removed. convert the pin into “P” port with plugged position is 四、4DWHG32型 top of main valve is internal drain, installing the
(2) Internal drain and external drain: external drain. 1、内供与外供转换：将主阀顶上P孔中的M6 M6 screw 2 is external drain.
Removing the bolt 1, to install M6 screw 2 is (2) Internal drain and external drain: 螺钉1 装上成外供,拆下为内供。
4、4DWHG32
external drain,unscrew the M6 screew 2 is internal Removing the bolt 1 and installing M6 screw 2 is 2、内排与外排转换：将主阀顶上T孔中的M6 1、Internal pilot and external pilot:
drain. external drain, unscrew the M6 screw 2 is internal 螺钉2装上为外排，拆下为内排。 Installing the M6 screw 1 in the“P”port on the
drain. top of main valve is external pilot；removing
the M6 screw 1 is internal pilot.
注意事项：内供时必须把底板上X口堵住， 2、Internal drain and external drain:
内排时必须把底板上Y口堵住。 Removing the M6 screw 2 in the“T”port on the
top of main valve is external drain；installing
the M6 screw 2 is internal drain.
NOTE : 1.The “X” port on the base plate must

be plugged if internal pilot.
2.The “Y” port on the base plate must
be plugged if internal drain.
36 www.nshpv.com 37
Hanshang Hydraulic
4DWHG10外型尺寸 4DWHG10 Subplate Installation Dimensions 4DWHG16外型尺寸 4DWHG16 Subplate Installation Dimensions
217
b a
Catalogue 2017
方
向
阀
168.5

A B
86
2
169
24 54 4- 6.6穿 Pylome
P
b X A B Y a
71.5
46
23
TT
阀固定螺钉 Valve’s set screw

1、阀固定螺丝： 1.Valve’s set screw 4个M10X60GB/T 70.1-12.9级拧紧扭矩Ma=75Nm 4 of M10×60 GB/T70.1-12.9 Tightening torque Ma=75Nm.
4个M6X45 GB/T70.1-12.9级 4 of M6×45 GB/T70.1-12.9 2个M6X60GB/T 70.1-12.9级拧紧扭矩Ma=15.5Nm 2 of M6×60 GB/T70.1-12.9 Tightening torque Ma=15.5Nm.
拧紧扭矩Ma=15.5Nm Tightening torque Ma=15.5Nm. P.T.A.B口0型圈：Φ26X2.4 O-ring for P.T.A.B Port: φ26×2.4
2、0型圈Φ16X1.9 2.O-ring φ16×1.9 X.Y.L口0型圈：Φ15X1.9 O-ring for X.Y.L Port: φ15×1.9
38 www.nshpv.com 39
Hanshang Hydraulic
4DWHG22外型尺寸 4DWHG22 Subplate Installation Dimensions 4DWHG25外型尺寸 4DWHG25 Subplate Installation Dimensions
b a b a
Catalogue 2017
方
向
阀
209
195
X A B
126

X A B
112
30 2
233
130
12.2 53 6-φ13穿 12.5
13 0
18
53 6- 14穿 Pylome
Y
T P
T P Y
117
92
b R
a
11 5
92
R
X A B
X A B
11.5
77
77
151

6个M12X60GB/T 70.1-12.9级拧紧扭矩Ma=130Nm 6 of M12×60 GB/T70.1-12.9 Tightening torque Ma=130Nm. 阀固定螺钉 Valve’s set screw
P.T.A.B口0型圈：Φ31X3.1 O-ring for P.T.A.B Port: φ31×3.1 6个M12X60 GB/T 70.1-12.9级拧紧扭矩Ma=130Nm 6 of M12×60 GB/T70.1-12.9 Tightening torque Ma=130Nm.
X.Y口0型圈：Φ25X3.1 O-ring for X.Y Port: φ25×3.1 A.B.P.T口0型圈：Φ34X3.1 O-ring for P.T.A.B Port: φ34×3.1
X.Y口0型圈：Φ25X3.1 O-ring for X.Y Port: φ25×3.1
40 www.nshpv.com 41
Hanshang Hydraulic
4DWHG32外型尺寸 4DWHG32 Subplate Installation Dimensions 底板安装尺寸 Installation dimensions
4DWHG16
4DWHG10
b a 138
108 101.6
18 88.1
61.9 76.6
Catalogue 2017
54 27 65.9
50.8 50 4-M10/19
37.3 7.9 34.1
27 18.3
1.6
方
13.5
16.7
11.1
6.3
3.2
T P
向
阀
233
2- 7 P
4 X
21.4
32.5
X L
69.9
XA B A B Y 4- 19
91
46
55.6
73
2- 6
12.7
152
54
T T A B
35
Y
5- 10.5

14.3
4-M6/12
49
1.6
364
4DWHG22/4DWHG25 4DWHG32
190.5
21.5 76 168 233.5
6- 22穿 190.5
130
112.5 168.5
147.5
18 100.6 114.5
76.8 21.5 82.5
53 76
P 29.2 6-M20/35
6-M12/25 41.5
Y
T
20
T P
159
197
8 Y Y
T P 34
L
159
197
L
R
116
3- 10
114.5
92
124
3- 24.5
74.5
X A B
73
79.3
X A B
46
B
28.5
X
35
A
17.5
19
19
5.6 3- 38
2- 10
76.5 114.5 17.3
77

6个M20X80 GB/T 70.1-2000 12.9级拧紧扭矩 6 of M20×80 GB/T70.1-2000 12.9 Tightening torque Ma=430Nm.
Ma=430Nm O-ring for P.T.A.B Port: φ42×3
A.B.P.T口0型圈：Φ42X3 O-ring for X.Y Port: φ19×3
X.Y口0型圈：Φ19X3
42 www.nshpv.com 43
Hanshang Hydraulic
WHG型液动换向阀
WHG SERIES HYDRAULIC
H 4DWHG10 * E 60 * DC24 N * * Z5L * * * * OPERATED DIRECTIONAL
VALVES
无=28MPa
Catalogue 2017
H=35MPa
No code=
28MPa
H=35MPa 方
通径 10;16;22;25;32 向
Size 10;16;22;25;32 附加说明
阀
无=主阀弹簧对中 For further details
H=主阀液压对中无=丁晴橡胶
No code=spring return V=氟橡胶
H=Hydraulic return
No code=NBR seals
见滑阀机能符号 V=FPM seals
WHG型液动换向阀是用控制油液发出的液讯号使主阀芯移动 WHG series hydraulic operated directional valves can be used to change

See the function symbol 无标记=不带预压阀来实现的油路的换向。 the direction of hydraulic oil by moving the main spool when the valve
of spool valve
P4.5=带预压阀；开启压力0.45MPa receives a hydraulic signal from the pilot hydraulic oil.
系列30=10通径;系列60=16-32通径 No code=Without preload valve
Series 30=Size 10;Series 60=Size 16-32 P4.5=With preload valve
O=导阀无复位弹簧 cracking pressure is 0.45MPa
连接尺寸与DWHG相同，详见第43页
OF=导阀无复位弹簧，带定位器无标记=不带插入式阻尼器
O=Without spring return B0.8=节流孔径0.8 B10=节流孔径1.0 Installation dimensions is the same with DWHG, refer to page 43
OF=Without spring return,with detent B12=节流孔径1.2 B15=节流孔径1.5
No coad if without plug-in throttleer
电压 Voltage B0.8=Throttle orifice size 0.8
DC12;DC24 ;AC110;AC220 B10=Throttle orifice size 1.0
B12=Throttle orifice size 1.2 H WHG G 20
N=有故障检查按钮;无=没有故障检查按钮 B15=Throttle orifice size 1.5
N concealed 无=28MPa
No Code Without concealed Z5L=带灯大方形插头 H=35MPa 附加说明
无=外供外排型 E=内供外排型
ET=内供内排型 T=外供内排型无=没有调节器无=丁晴橡胶
No code=Externally pilot, externally drained S=有调节器,进口节流 S2=有调节器,出口节流 V=氟橡胶
型号
E=Internally pilot,externally drained No code=Without pilot adjustment No code=NBR seals for petroleum oils
ET=Internally pilot internally drained S=With meter-in pilot adjustment 通径 10;16;25;32
T=Externally pilot, internally drained S2=With meter-out pilot adjustment
无=主阀弹簧对中无=不带调节器
H=主阀液压对中 S=带调节器，进口节流
(仅通径10：C、D、K、Z、Y可带H) S2=带调节器，出口节流
机能符号系列号 20=通径10; 50=通径16,25,32
44 www.nshpv.com 45
Hanshang Hydraulic
DWMG 型手动换向阀特性曲线 Characteristic curves DWMG6
DWMG SERIES MANUALLY

VALVES
Catalogue 2017
方
向
阀
DWMG 型手动换向阀是通过手柄的操作使阀芯做轴向移动， DWMG series manually operated directional valves are direct type

从而对油路进行切换的直动式换向阀，采用定位器或弹簧复 directional valves ,It can control the start ,stop & direction of fluid flow.
位装置。 This series with detent or return spring are available.
通径 Size 6 10 16 22 25 32
流量 Flow rate(L/min) 60 100 300 450 650 1100
特性曲线 Characteristic curves DWMG10
工作压力(Mpa) Operating pressure(Mpa) A、B、P 油口31.5 T油口16/A、B、P oil ports 31.5 T oil ports16
重量(千克) Weight(KGS) 1.5 4.4 8.9 12.5 19.4 39.2
NAS1638 9级和ISO4406 20/18/15级

46 www.nshpv.com 47
Hanshang Hydraulic
特性曲线 Characteristic curves DWMG16 特性曲线 Characteristic curves 4DWMG25

Catalogue 2017
方
向
阀

特性曲线 Characteristic curves 4DWMG32
特性曲线 Characteristic curves DWMG22
48 www.nshpv.com 49
Hanshang Hydraulic
DWMG6/10 机能符号 DWMG6/10 Spool symbols DWMG6 外型尺寸 DWMG6 Subplate Installation Dimensions
20° 20°
Catalogue 2017
方
向
140
阀
50.4
47
2

A B
142
DWMG16/22/25/32 机能符号 DWMG16/22/25/32 Spool symbols

66.5
40.5 13.6
F A B
32.5
A B A B
31
47
52
a b a b
20.5
P T P T
C P
7.2
D
0.75
K 1
Z
1、阀固定螺丝 1.Valve’s set screw

4个M5X50 GB/T70.1-12.9级 4 of M5×50 GB/T70.1-12.9
拧紧扭矩Ma=9Nm Tightening torque Ma=9Nm.
2、0型圈12.3X1.9 2.O-ring φ12.3×1.9
50 www.nshpv.com 51
Hanshang Hydraulic
DWMG10 外型尺寸 DWMG10 Subplate Installation Dimensions DWMG16 外型尺寸 DWMG16 Subplate Installation Dimensions
16° 16° 26 ° 26°

Catalogue 2017
方
向
阀
30 4
210
98
83

A B Y
B A
2- 6.6穿 Pylome 4- 11 穿 Pylome
2 34 .1
1. 6
T P X
69.9
91
L
79.5
T T
70
46
A B Y
B A
19 50
1. 6
101. 6
P
12
250. 5
19.2 54
92.4 1
155.4
1、阀固定螺钉 1.Valve’s set screw 阀固定螺钉 Valve’s set screw

4个M6X50 GB/T70.1-12.9级 4 of M6 ×50 GB/T70.1-12.9 4个M10X60GB/T 70.1-12.9级拧紧扭矩Ma=75Nm 4 of M10×60 GB/T70.1-12.9 Tightening torque Ma=75Nm.
拧紧扭矩Ma=15.5Nm Tightening torque Ma=15.5Nm. 2个M6X60GB/T 70.1-12.9级拧紧扭矩Ma=15.5Nm 2 of M6×60 GB/T70.1-12.9 Tightening torque Ma=15.5Nm.
2、0型圈：Φ16X1.9 2.O-ring φ16×1.9 P.T.A.B口0型圈：Φ26X2.4 O-ring for P.T.A.B Port: φ26×2.4
X.Y.L口0型圈：Φ15X1.9 O-ring for X.Y.L Port: φ15×1.9
52 www.nshpv.com 53
Hanshang Hydraulic
DWMG22 外型尺寸 DWMG22 Subplate Installation Dimensions DWMG25 外型尺寸 DWMG25 Subplate Installation Dimensions
Catalogue 2017
32° 32 °
方
向
阀
32 5
140
X A B

340
13 0
53 6- 14
12
P
T
Y
11 5
92
A B
X
19 77

6个M12X60 GB/T 70.1-12.9级拧紧扭矩Ma=130Nm 6 of M12×60 GB/T70.1-12.9 Tightening torque Ma=130Nm.
P.T.A.B口0型圈：Φ34X3.1 O-ring for P.T.A.B Port: φ34×3.1
6个M12X60 GB/T 70.1-2000-12.9级拧紧扭矩Ma=130Nm 6 of M12×60 GB/T70.1-2000-12.9 Tightening torque Ma=130Nm.
P.T.A.B口0型圈：Φ31X3.1 O-ring for P.T.A.B Port: φ31×3.1
54 www.nshpv.com 55
Hanshang Hydraulic
DWMG32 外型尺寸 DWMG32 Subplate Installation Dimensions

4 6
DWMG E 60 F
For further details

Catalogue 2017
无=丁晴橡胶
3=3 Oil ports V=氟橡胶
No code=NBR seals
4=4 Oil ports
V=FPM seals 方
向
Model No code= Spring return 阀
通径: 6/10/16/22/25/32 F=With detent
Size: 6/10/16/22/25/32
Series number
Spool type Size 6=50 Size10=10 Size16=30

6个M20X80 GB/T 70.1-2000-12.9级拧紧扭矩 6 of M20×80 GB/T70.1-2000-12.9 Tightening torque Ma=430Nm.
Ma=430Nm O-ring for P.T.A.B Port: φ42×3
P.T.A.B口0型圈：Φ42X3 O-ring for X.Y Port: φ18.5×3.1
X.Y口0型圈：Φ18.5×3.1
56 www.nshpv.com 57
Hanshang Hydraulic
QDE型电磁球阀
QDE SERIES DIRECTIONAL
M 3 QDE 6 U 20 315 DC24 N Z5L P B0.8
BALL VALVES
矿物质液压油无=不带节流器
Mineral B0.8=节流孔径0.8
Catalogue 2017
hydraulic oil B10=节流孔径1.0

B12=节流孔径1.2
符号 SYMBOL 3=三油口 4=四油口 B14=节流孔径1.4
3=3 actuator ports
A B A B 4=4 actuator ports
B15=节流孔径1.5 方
B18=节流孔径1.8
型号 B20=节流孔径2.0
向
Model B22=节流孔径2.2 阀
P T P T
通径 6；10 No code=Without
C型/C Type U型/U Type D型/D Type Y型/Y Type Size 6; 10 throttle insert
U=二位三通常开，C=二位三通常闭 B0.8=Throttle 0.8
B10=Throttle 1.0
D=二位四通；Y=二位四通 B12=Throttle 1.2
U=2/3 way normally open B14=Throttle 1.4
QDE型方向阀是电磁铁操作的钢球式换向阀，用于控制油液的 QDE series are solenoid are solenoid operated poppet valves, they are C=2/3 way normally closed B15=Throttle 1.5

开启、停止和液流的方向。常用于保压回路。 used to control the start ,stop and direction of flow. D=2/4 way; Y=2/4 way B18=Throttle 1.8
系列号 B20=Throttle 2.0
Series number B22=Throttle 2.2
技术参数 Technical data 工作压力无=不带插装单向阀
Operating pressure P=带插装单向阀
电压 Voltage No code=Without cartridge
规格 Size 6U 6C 6D 6Y 10U 10C 10D 10Y check valves
DC12;DC24 ;AC110;AC220 P=With cartridge check valves
额定流量(L/min) Rated flow(L/min) 16 16 12 12 30 24 30 24
N=有故障检查按钮;无=没有故障检查按钮 Z5L=带灯大方形插头
N concealed
重量(千克) Weight(KGS) 1.2 1.2 1.2 1.2 2.8 2.8 2.8 2.8 No Code Without concealed
NAS1638 9级和ISO4406 20/18/15级

底板连接尺寸 Subplate Installation dimensions
50 91
40 54
35 50.8 18.5
25 37.3
15 27
5 5 16.7
3.2
5 5
12
P P
20
21.4
A
6.3
35
32.5
B A B
40
50
46
70
4- 8max
T
5- 8 T1
T
4-M6/12 4-M6/12
58 www.nshpv.com 59
Hanshang Hydraulic
底板安装尺寸 Subplate mounting Installation dimensions

QE型电磁卸荷球阀
QE SERIES SOLENOID
OPERATED UNLOADING 52
40
BALL VALVES 35
15 5
Catalogue 2017
5
符号 SYMBOL
5
方
20
A 向
电磁铁阀
40
50
Solenoid
B
2- 6
QE型电磁卸荷球阀用于控制回路的开启和关闭，主要用于保 QE series solenoid operated unloading ball valve is used to control the 4-M6/12

压回路的泄压。 opening and closing in pilot return lines.
It is often used for releasing the pressure in pressure-maintaining return
lines
M 2 QE 6 B 20 315 DC24 *
For further details 附加说明
电压 Voltage
最大工作压力(Mpa) Max. operating pressure(Mpa) 31.5 DC12;DC24 ;AC110;AC220
最大流量(L/min) Max .flow rate(L/min) 16 工作压力
重量(千克) Weight(KGS) 1.3 Operating pressure31.5MPa
阀体（材料）表面处理钢件表面发黑处理系列号
Valve body（Material）Surface treatment Steel Body Surface Black Oxide Series number
常闭
NAS1638 9级和ISO4406 20/18/15级
油液清洁度/Oil cleanliness Normally closed
60 www.nshpv.com 61
Hanshang Hydraulic
底板连接尺寸 Subplate Installation dimensions

M-2SED型电磁球阀
M-2SED SERIES DIRECTIONAL
6.75
0.75
5.95
BALL VALVES 2- 5
16.25
A
26.55
B
32.5
31
46
Catalogue 2017
符号 SYMBOL T
10.3
A 19
方
15.8 27.8 向
C型/C Type a b 40.5 阀
P 70
183.6
4- 5.4
M-2SED型方向阀是电磁截止式方向阀，用于控制油液的流 M-2SED series direction valves are solenoid directional loose valves,these

valves are used to control the oil flow, stop and direct.
35.5
动、停止和方向。
46
4- 9.4
型号 Size M-2SED
工作压力(Mpa) Operating pressure(Mpa) 20
流量(L/min) Flow rate(L/min) 20
M 2 SED 6 C 10 20 DC24 N Z5L *
NAS1638 9级和ISO4406 20/18/15级无=不带节流器

NAS1638 class 9 and ISO4406 class 20/18/15 B0.8=节流孔径0.8
B10=节流孔径1.0
B12=节流孔径1.2
B14=节流孔径1.4
B15=节流孔径1.5
B18=节流孔径1.8
B20=节流孔径2.0
二 B22=节流孔径2.2
C=2/2 way normally closed No code=Without
throttle insert
Series number B0.8=Throttle 0.8
B10=Throttle 1.0
工作压力至20MPa B12=Throttle 1.2
Operating pressure 20MPa B14=Throttle 1.4
B15=Throttle 1.5
电压 Voltage B18=Throttle 1.8
DC12;DC24 ;AC110;AC220 B20=Throttle 2.0
B22=Throttle 2.2
N=有故障检查按钮;无=没有故障检查按钮
N concealed Z5L=带灯大方形插头
No Code Without concealed
62 www.nshpv.com 63
Hanshang Hydraulic
FG/FK 管式图 FG/FK Drawing

FG 型节流阀/FK单向节流阀
FG THROTTLE VALVES/FK
THROTTLE CHECK VALVES
Catalogue 2017
符号 SYMBOL
流
量
阀
D1
通径 Size D2 L1 S1 S2 T1
公制 Metric 英制 Inch
6 M14X1.5 G1/4" 34 65 22 32 12
8 M18X1.5 G3/8" 38 65 24 36 12
FG/FK型阀是直接安装在管路上的节流阀/单向节流阀。FG型 FG/FK series throttle/throttle check valves mounted on the oil pipe lines 10 M22X1.5 G1/2" 48 80 30 46 14
Flow Control Valves

节流阀只要旋转调节套就可以改变节流口通流面积从而实现 di-rectly.FG throttle valve is used to regulate flow by turning adjustment
15 M27X2 G3/4" 58 100 41 55 16
流量调节，为双向节流。FK型节流阀带有单向阀，可实现单 sleeve.FK throttle check valve is used to control flow in one direction and
20 M33X2 G1" 72 110 46 70 18
向节流。 allow free flow in the opposite.
25 M42X2 G1 1/4" 87 130 55 85 20
30 M48X2 G1 1/2" 93 150 60 90 22
通径 Size 6 8 10 15 20 25 30 FG 10 G 1.2 * * *
工作压力(Mpa) Operating pressure(Mpa) 31.5 31.5 31.5 31.5 31.5 31.5 31.5
流量(L/min) Flow rate(L/min) 15 30 50 125 200 300 400
英制 Inch G1/4" G3/8" G1/2" G3/4" G1" G1 1/4" G1 1/2"
无=丁晴橡胶
公制 Metric M14 x 1.5 M18 x 1.5 M22 x 1.5 M27 x 2 M33 x 2 M42 x 2 M48 x 2
V=氟橡胶
单向阀开启压力 Cracking pressure of check valve 0.05MPa No code=NBR seals
FK V=FPM seals
重量(千克) Weight(KGS) 0.3 0.4 0.7 1.3 2.3 3.8 4.8
FG 无＝英制; 2＝公制
系列号
阀体（材料）表面处理钢件表面发黑处理 Series number
NAS1638 9级和ISO4406 20/18/15级

64 www.nshpv.com 65
Hanshang Hydraulic
FV/FRV外形尺寸 FV/FRV Unit Dimensions

FV/FRV型节流阀/单向节流阀
FV/FRV SERIES THROTTLE
VALVES/THROTTLE CHECK
VALVES
Catalogue 2017
符号 SYMBOL
流
B A B A 量
阀
FV
FVP FRV B A
FRVP
FV/FRV型节流阀/单向节流阀是一种比较简单而又精确地调节 FV/FRV; FVP/FRVP series throttle check valves are used to regulate the
Flow Control Valves

执行元件速度的流量控制阀，完全关闭时，它又是截止阀。 speed of actuators simply and precisely.
L1 L2
技术参数 Technical data 通径 Size D WxH H1 H2 H3
FV FRV FV FRV
6 G1/8" M10X1 16X16 8 50 55 19 26 38 45
8 G1/4" M14X1.5 33X28 12.5 69.5 76.5 32.5 40 63.5 63.5
通径 Size 6 8 10 12 16 20 25 30 10 G3/8" M18X1.5 35X37 15 82 89 32.5 41 65 70
工作压力(Mpa) Operating pressure(Mpa) 35 35 35 35 35 35 35 35 12 G1/2" M22X1.5 35X37 17.5 84 94 44 44 73 73
流量(L/min) Flow rate(L/min) 16 24 35 45 60 100 150 210
16 G3/4" M27X2 45X50 22.5 91 101 44 57 88 88
英制 Inch G1/8" G1/4" G3/8" G1/2" G3/4" G1" G1 1/4" G1 1/2"
20 G1" M33X2 56X56 26 129 146 49 79 98 127
公制 Metric M10 x 1 M14 x 1.5 M18 x 1.5 M22 x 1.5 M27 x 2 M33 x 2 M42 x 2 M48 x 2
25 G1 1/4" M42X2 63X63 30 135 152 54 91 108 143
单向阀开启压力 Cracking pressure of check valve 0.05MPa
30 G1 1/2" M48X2 73X73 35 140 157 54 91 108 143
管式面板安装 Pipeline type panel connection M12 x 1.5 M18 x 1.5 M18 x 1.5 M22 x 1.5 M22 x 1.5 M33 x 1.5 M36 x 1.5 M36 x 1.5
FV 0.4 0.3 0.5 0.8 1.1 2.3 4.4 3.8
FRV 0.4 0.3 0.5 0.8 1.1 2.3 4.4 5.3
重量(千克) Weight(KGS)
FVP 0.25 0.7 1 1.2 2.5 4.3 8.3 11.2
FRVP 0.26 0.7 1 1.4 2.7 4.7 8.8 12.2
钢件表面镀彩锌
阀体（材料）表面处理 FV/FRV
STEEL BODY SURFACE Color zinc plating
Valve body（Material）
Surface treatment 钢件表面发黑处理
FVP/FRVP
Steel Body Surface Black Oxide
NAS1638 9级和ISO4406 20/18/15级

66 www.nshpv.com 67
Hanshang Hydraulic
FVP/FRVP安装尺寸/FVP/FRVP Installation dimensions

2MRB 型流量控制阀
2MRB SERIES FLOW
CONTROL VALVES
D
H
Catalogue 2017
H1
D1 符号 SYMBOL
L4 L5 流
量
A B
2- D2max B A 阀
B1
B
L3 L2
L1
L
2MRB 型流量控制阀是带节流口式节流器的精密节流阀，不受 2MRB series flow control valves are restrictive style flow regulators, without
Flow Control Valves

压力和温度的影响。 affected by pressure and temperature.
型号Model D D1 D2 H H1 L L1 L2 L3 L4 L5 B B1
FVP6/FRVP6 4-Φ11 4-Φ6.6 5 7 20/24 41.5 19 / 6.4 1.6 16 41.5 28.5 技术参数 Technical data
FVP8/FRVP8 4-Φ11 4-Φ6.6 8 7 25/26 63 35 / 14.2 4.5 25.5 46 33.5
FVP10/FRVP10 4-Φ11 4-Φ6.6 10 7 28/32 70 33.5 / 18 4 25.5 51 38

通径 Size 5 10 16
FVP12/FRVP12 4-Φ11 4-Φ6.6 35X37 7 28/35 80 38 / 21 4 30 57.5 44.5
最大流量(A－B)(L/min) Max.flow rate(A－B)(L/min) 0.2 0.6 1.2 3 6 10 15 10 16 25 50 60 100 160
FVP16/FRVP16 6-Φ14 6-Φ9 45X50 7 54 104 76 38 14 11.4 54 70 54
△P值(B-A)(Mpa) △P Value(B-A)(Mpa) 0.05 0.05 0.06 0.09 0.18 0.36 0.67 0.2 0.25 0.35 0.6 0.28 0.43 0.73
FVP20/FRVP20 6-Φ14 6-Φ9 56X56 11 58.5 127 95 47.5 16 19 57 76.5 60
工作压力(Mpa) Operating pressure(Mpa) 21 31.5 31.5
FVP25/FRVP25 6-Φ17 6-Φ11 63X63 13 68.5 165 120 60 15 20.6 79.5 100 76
最小压力损失 Min.pressure loss 0.3-0.5 0.3-0.7 0.5-1.2
FVP30/FRVP30 6-Φ19 6-Φ13 73X73 18 79 186 143 71.5 15 23.8 95 115 92
过滤(延长使用寿命)(µm) Filtering to prolong service life(µm) 25（Q<5L/min);10(Q<0.5L/min）
重量(千克) Weight(KGS) 1.38 3.4 7.57
FV 10 * 1 10 * * Valve body（Material）Surface treatment
NAS1638 9级和ISO4406 20/18/15级

FV=节流截止阀附加说明 NAS1638 class 9 and ISO4406 class 20/18/15
FRV=单向节流截止阀 For further details
FVP=板式节流截止阀
FRVP=板式单向节流截止阀无＝英制;2＝公制
FV=Throttle shut-off valve No code=Inch;
FRV=Throttle check shut-off valve 2=Metric
FVP=Subplate type throttle shut-off valve 无=丁晴橡胶
FRVP= Subplate type throttle check shut- V=氟橡胶
off valve No code=NBR seals
V=FPM seals
通径:6,10,12,16,20,25,30,40
Size:6,10,12,16,20,25,30,40 系列号
Series number
无＝管式安装；S＝面板安装
No code=Threaded connection 1=钢
S=Subplate mounting 1=Steel
68 www.nshpv.com 69
Hanshang Hydraulic
2MRB 底板连接尺寸 2MRB Subplate Installation dimensions

FC 51流量阀
FC51 FULL RANGE PRESSURE COMPENSATING
VARIABLE FLOW CONTROL VALVE
Catalogue 2017
符号 SYMBOL
B
B1
流
量
阀
型号Model B B1 B2 B3 B4 L L1 L2 L3 L4 D D1
Flow Control Valves

2MRB5 60 48 35 13 6 60 48 41 7 6 4-M5/12 2-Φ6
2MRB10 101.5 82.5 71.6 30.1 9.5 95 76 55.1 9.6 8.5 4-M8/13 2-Φ12 技术参数 Technical data
2MRB16 123.5 101.5 90.5 15 11 123.5 101.5 75 20.5 11 4-M10/25 2-Φ20

最大流量(L/min) Max .flow rate(L/min) 114
2MRB 5 30 15 * * 介质温度(℃) Fluid temperature(℃) -20～70
转轴扭矩 Torque to turn side lever spool EX口压力为20.7MPa时转轴扭矩为3.9Nm 3.9Nm with 20.7MPa on EX port
阀体（材料）表面处理铸件表面磷化处理
Valve body（Material）Surface treatment casting phosphating surface
无=丁晴橡胶 FC * 51 G3/8
V=氟橡胶
流量（流动方向A-B详见表格） No code=NBR seals
See the form table for flow rate (direction A-B) V=FPM seals
型号：Model 螺纹连接 Threaded Connection

标准优先流量范围 standard
G3/8 (0-30L/min）
无=标准型不带溢流阀 G1/2 (0-61L/min）
R=带有球溢流阀(标准设定压力10.3MPa) G3/4 (0-114L/min）
B=带有可调节溢流阀(标准设定压力10.3MPa) NPT1/2 (0-61L/min）
Omit=No relief NPT3/4 (0-114L/min）
R=Adj.ball spring relief
(Standard 10.3MPa setting)
B=Adj.high-lift spring relief 51=标准型
(Standard 10.3MPa setting) 51-Standard flow control
70 www.nshpv.com 71
Hanshang Hydraulic
FC51安装尺寸/Installation dimensions FCB51安装尺寸/Installation dimensions
98.4
98
Catalogue 2017
47.5
1
2
3
流
4 2-φ7 量
119.5
5 阀
6
53
7.3
7
8
50.5
9
10
Flow Control Valves

182.2
20.7
3.1 48
117.4 73
47.5
1
2 2-φ7
3
FCR51安装尺寸/Installation dimensions 4
119.5
5
98 6
54
7
8
50.5
9
10
7.7
3 48
20.7
73
47.5
145.5
1 117.4
2 2-φ7
3
4
119.5
5
6
54
7.7
8
50.5
9
10
20.7 3 48
117.4
73
72 www.nshpv.com 73
Hanshang Hydraulic
ZPB6VA外形尺寸和安装 ZPB6VA External Dimensions and Fittings

ZPB/Z2PB型叠加式溢流阀
ZPB/Z2PB SERIES
MODULAR RELIEF VALVES R
Ningbo Hanshang Hydraulic Co.,Ltd.
符号 SYMBOL
40
ZPB/VB ZPB/VA ZPB/VP
P T B A P T B A P A B T
Catalogue 2017
P1 T1
Z2PB/VC
B1 A1 P1 T1 B1 A1 P1 A1 B1 T1
40.5
叠
P A B T P A B T
27.8 加
4- 5.5穿 Pylome
19
10.3 13.8
阀
0.75
6
P1 A1 B1 T1 P1 A1 B1 T1
T
5.95
16.25
ZPB/Z2PB型压力控制阀是叠加板结构的先导式溢流阀。 Pressure relief valves of ZPB/Z2PB series are pilot operated style modular
26.55
32.5
44.5
valves.
31
Modular Control Valves

B
技术参数 Technical data A
通径 Size 6 10 P
工作压力(MPa) Operating pressure (MPa) 31.5 31.5
98
流量(L/min) Flow rate (L/min) 60 100
154
油温范围(℃) Oil temperature range(℃) -20～70 -20～70
重量(千克) ZPB 1.3 2.6

Weight(KGS) Z2PB 1.9 3.1 ZPB6VP VB外形尺寸和安装 ZPB6VP VB External Dimensions and Fittings
NAS1638 9级和ISO4406 20/18/15级

油液清洁度/Oil cleanliness R
NAS1638 class 9 and ISO4406 class 20/18/15 Ningbo Hanshang HydraulicC o.,Ltd.
40
Z 2 PB 6 VA 1 40 315 V *
98
40.5
（只有VA,VB,VP）
27.8
（只有VC,VD） 19
4- 5.5穿 Pylome
10.3 46
（Only for VA,VB,VP）
无=丁晴橡胶
（Only for VC,VD） V=氟橡胶
T
5.95
No code=NBR seals for petroleum oils
16.25
26.55
44.5
32.5
=
= B
A
=
=
P
6
98
handwheel 154
74 www.nshpv.com 75
Hanshang Hydraulic
Z2PB6VC VD外形尺寸和安装 Z2PB6VC VD External Dimensions and Fittings Z2PB10VC VD外形尺寸和安装 Z2PB10VC VD External Dimensions and Fittings
R
Ningbo Hanshang Hydraulic Co.,Ltd.
50
R
Ningbo Hanshang HydraulicC o.,Ltd.
40
Catalogue 2017
20
114.5
54
50.8
37.3
叠
40.5
27.8 56 44 27 加
阀
4- 5.5穿 Pylome 19 36
16.7
11.8
10.3
3.2
5.95
6.3
16.25
P 6.6穿 Pylome
B
26.55
A
21.4
32.5
44.5
31
32.5
A B
69.5
46
P

T
6
T
0.75
110 56
222
171.5
ZPB10VA外形尺寸和安装 ZPB10VA External Dimensions and Fittings
114.5 ZPB10VP VB外形尺寸和安装 ZPB10VP VB External Dimensions and Fittings

54
50.8
37.3
27 18.5 R
16.7
3.2
50
11.2
P
6.3
21.4
φ6.6穿 Pylome
A B 114.5
32.5
54
69.5
46
50.8
T T 37.3
27
16.7
16.5 3.2
11.2
P
171.5 6.6穿 Pylome
21.4
A B
6.3
32.5
69.5
R
46 T T
50
171.5
76 www.nshpv.com 77
Hanshang Hydraulic
ZPR6D外形尺寸和安装 ZPR6D External Dimensions and Fittings

ZPR-D 型叠加式直动减压阀
ZPR-D SERIES DIRECT
MODULAR REDUCING VALVES
R
40
符号 SYMBOL
Catalogue 2017
20
ZPR/DA/YM ZPR/DB/YM ZPR/DP/YM
P T B A P T B A P T B A
M M M
叠
P1 T1 B1 A1 P1 T1 B1 A1 P1 T1 B1 A1
170.8
加
阀
ZPR/DA/Y ZPR/DB/Y
P T B A P T B A
64 18.8
M M
40.5
P1 T1 B1 A1
27.8
P1 T1 B1 A1
19
10.3 12.5
0.75
7.25
ZPR-D型减压阀是叠加式直动三通减压阀，具有二次压力保护 ZPR-D series are 3-way direct operated pressure reducing valves, which

装置，主要用来降低系统某一回路的压力。 are used to reduce the pressure in a certain circuit lower than of the main T
circuit.
32.5
31
47
26.55
A B
16.25
5.95
P
4- 5.5穿 Pylome
通径 Size 6 10
工作压力(Mpa) Operating pressure(Mpa) 31.5 31.5
次工作压力(Mpa) Second working pressure(Mpa) 21 21
背压(MPa) Back pressure(MPa) 6 6
流量(L/min) Flow rate(L/min) 30 60
介质温度(℃) Fluid temperature(℃) -20～80 -20～80
Z PR 6 D A 2 30 25 Y M *
重量(千克) Weight(KGS) 1.3 2.8
NAS1638 9级和ISO4406 20/18/15级

手轮
78 www.nshpv.com 79
Hanshang Hydraulic
Z1DS6外形尺寸和安装 Z1DS6 External Dimensions and Fittings

Z1DS型叠加式单向阀
Z1DS SERIES MODULAR
CHECK VALVES
符号 SYMBOL
Catalogue 2017
T A P F
叠
加
D C B E 阀
Z1DS型单向阀是叠加式结构的单向阀。 Z1DS series are direct operated check valves.

通径 Size 6 10
工作压力(Mpa) Operating pressure(Mpa) 31.5 31.5
流量(L/min) Flow rate(L/min) 40 100
油温温度(℃) Oil temperature range（℃） -20～70 -20～70
重量(千克) Weight(KGS) 0.9 2.3
阀体（材料）表面处理 Z1DS10外形尺寸和安装 Z1DS10 External Dimensions and Fittings

NAS1638 9级和ISO4406 20/18/15级

NAS1638 class 9 and ISO4406 class 20/18/15 90
54
50.8
37.3 18
27 4-φ6.6 穿Pylome
16.7
Z1DS 6 1 30 3. 2
12
P
6. 3
21. 4
型号 Model A B
32.5
通径:6;10 Size:6;10 附加说明
46
70
油口液流形式见符号图 For further details
See the symbol for flow type 无＝丁腈橡胶 V＝氟橡胶
T
开启压力 Cracking pressure No code=NBR seals T
1= 0.05MPa V=FPM seals
2= 0.3MPa 系列号
3= 0.5MPa Series number
50
80 www.nshpv.com 81
Hanshang Hydraulic

Z2DS型叠加式单向阀
Z2DS SERIES PILOT CONTROLLED
MODULAR CHECK VALVES
Catalogue 2017
符号 SYMBOL
P A B T P A B T
叠
P A B T
Z2DS Z2DSA Z2DSB 加
阀
P1 A1 B1 T1 P1 A1 B1 T1 P1 A1 B1 T1
Z2DS型单向阀是叠加式液控单向阀，它可用于关闭一个或两个 Z2DS series are pilot operated style sandwich valves. These valves used

工作油口且无泄漏持续工作时间长，稳定性好。 to close one or two actuator ports.
通径 Size 6 10 16 22
工作压力(MPa) Operating pressure (MPa) 31.5 31.5 31.5 31.5
流量(L/min) Flow rate (L/min) 50 80 200 300
介质温度范围（℃）Fluid temperature range（℃） -30～80℃ -30～80℃ -30～80℃ -30～80℃
重量(千克) Weight(KGS) 1 2.2 6.8 12.8
NAS1638 9级和ISO4406 20/18/15级

Z2DS 6 10
附加说明
For further details
型号 Model
无=丁晴橡胶
通径:6;10;16;22
V=氟橡胶
Size:6;10;16;22 No code=NBR seals
无＝A，B口都有单向阀 V=FPM seals
A＝A口带单向阀系列号50＝6通径；10＝10通径
B＝B口带单向阀 30＝16通径，22通径
No code=A,B ports with check valves Series number 50=Size 6;
A=A ports with check valve 10=Size 10;
B=B ports with check valve 30=Size 16,22
82 www.nshpv.com 83
Hanshang Hydraulic

Z2FDS 型叠加式双单向节流阀
179
Z2FDS SERIES DOUBLE
17 0
10 1.6 THROTTLE CHECK VALVES
88. 1
76.6
34.2 65. 9
50
Catalogue 2017
34 .1 80
4- 11穿 18.3 2- 6.6穿 Pylome
符号 SYMBOL
1. 6
P
X
叠
加
50
T
69 .9
91
55 .6
54
B
A Y
35
10 .5 14.3
12 .7
1. 6
Z2FDS 型叠加式双单向节流阀通过改变节流口断面大小来调 Z2FDS series double throttle/check valves are used to restrict flow in

节油路流量，从而实现流量控制，在反向时，液压油直接通过 one direction while allowing free-flow in the opposite direction as check
单向阀回油。 valves.

通径 Size 6 10 16 22
工作压力(MPa) Operating pressure (MPa) 31.5 31.5 31.5 31.5
流量(L/min) Flow rate (L/min) 80 160 250 350
介质温度范围（℃）Fluid temperature range（℃） -30～80℃ -30～80℃ -30～80℃ -30～80℃
重量(千克) Weight(KGS) 1 2.2 4.7 8
NAS1638 9级和ISO4406 20/18/15级

Z2FDS 6 30 S V
附加说明
型号 For further details
Model 无=丁晴橡胶
通径：6；10；16；22 V=氟橡胶
Size: 6,10,16,22 No code=NBR seals for petroleum oils
系列号30＝通径6、16、22；20＝通径10 S=进口节流；S2＝出口节流
Series number 30=Size6,16,22; 20=Size10 S=Meter-in control; S2=Meter-out control
84 www.nshpv.com 85
Hanshang Hydraulic
Z2FDS6外形尺寸和安装 Z2FDS6 External Dimensions and Fittings Z2FDS16外形尺寸和安装 Z2FDS16 External Dimensions and Fittings
R
Ni ngb oH an sh an gH ydra uli cC o. ,L td .
R
Ni ngb oH an sh an gH yd ra ul ic Co ., Lt d.
28.5
51
Catalogue 2017
128 247
171 38
120 101.6 叠
40.5 41 50
4- 11 穿 Pylome
加
34.7 34.1 2- 6.6 穿 Pylome
阀
1. 6
27.8
19
7.25
0.75
4- 5.5穿 Pylome
5.95
10. 3
35
P X
T
69 .9
91

T L
16.2 5
Y
26.55
A
32. 5
B
31
47
A B
P
1.6
10.5
Z2FDS22外形尺寸和安装 Z2FDS22 External Dimensions and Fittings
Z2FDS10外形尺寸和安装 Z2FDS10 External Dimensions and Fittings
R
Ningb oH anshang Hydrauli cC o. ,Ltd .
32.5
16 3
15 3
54
50.8
37.3
49.5 27
16.7
3.2
15
21. 4
4- 6.6 穿 Pylome
P
32.5
6.3
70
46
A B
T T
86 www.nshpv.com 87
Hanshang Hydraulic
HSZVB6P阀板外形尺寸 HSZVB6P Installation Dimensions

HSD(A)ZVB6P 阀板系列
HSD(A)ZVB6P SERIES MANIFOLD
符号 SYMBOL
Catalogue 2017
溢流阀插孔（可选配）
Relief valve cavavity(optional)
底
板
Relief valve (optional)
Subplates
HSZVB16P 阀板 MANIFOLD
HS A ZVB6 P 1 B C
No code=Without cavity of relief valve

With cavity of relief valve
阀安装螺纹油路块安装螺纹
油口种类 Valve Installation Manifold Installation
Thread type thread thread
P.S #10-24UNCx15DP 5/16-18UNCx15DP
B.M M5 ISO 6Hx12DP M8 ISO 6Hx15DP
并联数量 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Stations number
L(mm) 60 114 168 222 276 330 384 438 492 546 600 654 708 762 816 870
注：1联带溢流阀的油路块长度为79.2mm。1联不带压力表接口。
Attention: The length of 1 station manifold with relief valve is 79.22mm,1 station manifold without oil port for pressure gauge.
88 www.nshpv.com 89
Hanshang Hydraulic

HSD(A)ZVB10P 阀板系列
HSD(A)ZVB10P SERIES MANIFOLD
符号 SYMBOL
Catalogue 2017
Subplates
HS A ZVB10 P 1 B C
No code=Without cavity of relief valve 阀安装螺纹油路块安装螺纹

油口种类
With cavity of relief valve Thread type Valve Installation
thread
Manifold Installation
thread
P.S 1/4-20UNCx19DP 5/16-18UNCx12DP
B.M M6 ISO H6x19DP M8 ISO H6x12DP
并联数量 1 2 3 4 5 6 7 8 9 10
Stations number
L(mm) 82.6 165.1 247.7 330.2 412.8 495.3 577.9 660.4 743 825.5
90 www.nshpv.com 91
Hanshang Hydraulic

HSDZVB16P 阀板系列
HSDZVB16P SERIES MANIFOLD
符号 SYMBOL
Catalogue 2017
板
Subplates
HS D ZVB16 P 1 B C
No code=Without cavity of relief valve 阀安装螺纹油路块安装螺纹

油口种类
With cavity of relief valve Thread type Valve Installation
thread
Manifold Installation
thread
3/8-16UNCx25DP
P.S 3/8-16UNCx19DP
1/4-20UNCx19DP
B.M M10 ISO H6x25DP M10 ISO H6x19DP

M6 ISO H6x19DP
并联数量 1 2 3 4 5 6 7 8
Stations number
L(mm) 101.6 203.2 304.8 406.4 508 609.6 711.2 812.8
92 www.nshpv.com 93
Hanshang Hydraulic
规格10 Size 10
G 阀板系列
规格 6 Size 6
L L10
L1 L4 L9
L2 L8
4-D4max L3
Catalogue 2017
B8
底
B7
B6
B5
B4
2-D1
B3
D3/
板
B2
H1
B1
L6 L5 H2
L7 D2/1
型号 Model L L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 B1 B2
G34 10/01 40.5 27.8 19 10.3 21 7.5 80 95 22 40 58 0.75 5.95
Subplates
G34 10/02 40.5 27.8 19 10.3 21 7.5 80 95 22 40 58 0.75 5.95
G34 42/01 40.5 27.8 19 10.3 26 7.5 90 105 21 45 69 0.75 5.95
型号 Model D1 D2 ΦD3 T1
G34 42/02 40.5 27.8 19 10.3 26 7.5 90 105 21 45 69 0.75 5.95
G535/01 G3/4 G1/4 42 16
G50 02/01 40.5 27.8 19 10.3 36 7.5 110 125 27.5 55 82.5 0.75 5.95
G535/02 M27X2 M14X1.5 42 16
G50 02/02 40.5 27.8 19 10.3 36 7.5 110 125 27.5 55 82.5 0.75 5.95
G536/01 G1 G1/4 47 18
型号 Model B3 B4 B5 B6 B7 B8 H1 H2 D D1 D2 D3 D4 G536/02 M33X2 M14X1.5 47 18
G34 10/01 16.25 26.55 32.5 31 58 34 8 25 G1/4 φ7 φ22 M5 φ7.6
G34 10/02 16.25 26.55 32.5 31 58 34 8 25 M14X1.5 φ7 φ22 M5 φ7.6
G34 42/01 16.25 26.55 32.5 31 80 44 8 29 G3/8 φ7 φ28 M5 φ7.6
G34 42/02 16.25 26.55 32.5 31 80 44 8 29 M18X1.5 φ7 φ28 M5 φ7.6
G50 02/01 16.25 26.55 32.5 31 102 58 8 34 G1/2 φ7 φ34 M5 φ7.6
G50 02/02 16.25 26.55 32.5 31 102 58 8 34 M22X1.5 φ7 φ34 M5 φ7.6
L
L1
41. 25 L2
L3
L4 L12
12.5
P1 L5 L11
H2
25
D3 L6 L7 L8 H1 L10
B7
40.5
27.8 T
B9
B6
19
4-M5； 10 10.3 22.2 5
B10
B4
B1
B5
T A1
B11
B1
B2
B3
B8
B
A B
32.5
26.5 5
31
50
0. 75
42
16.2 5
P D4
25
25
5. 95
8
D5
12.5 69 8 12.5
8. 75
85
2-φ6 .6
L9
型号 Model P1/T1/A1/B1
25
12.5
T1 G342/01/SE G3/8
7
2-φ1 1 41. 25
94 www.nshpv.com 95
Hanshang Hydraulic
型号 Model L L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 B B1 B2 B3 规格16 Size 16

G292/01 102 79.4 54 50.8 37.3 27 16.7 12.7 11.3 55.4 10.7 39.7 68.7 115 92 46 32.5 101.6
88.1 109
G308/01 102 79.4 54 50.8 37.3 27 16.7 12.7 11.3 55.4 10.7 39.7 68.7 115 92 46 32.5 76.6 94
65.9 74
29.6 50 60
G377/01 102 79.4 54 50.8 37.3 27 16.7 12.7 11.3 55.4 10.7 39.7 68.7 115 92 46 32.5 31
34.1 4-M10/19 17 7
19.2 18.3
G378/01 102 79.4 54 50.8 37.3 27 16.7 12.7 11.3 55.4 10.7 39.7 68.7 115 92 46 32.5
P T
G534/01 120 79.4 54 50.8 37.3 27 16.7 12.7 20.3 61.4 3.2 39.7 76.2 115 92 46 32.5 X
T P
G66/01 102 79.4 54 50.8 37.3 27 16.7 12.7 11.3 55.4 10.7 39.7 68.7 115 92 46 32.5
Catalogue 2017
X D2/13
21/1 L (X.Y.L)
G67/01 102 79.4 54 50.8 37.3 27 16.7 12.7 11.3 55.4 10.7 39.7 68.7 115 92 46 32.5 4
71.5
2- 7max(X,Y)
92
L
55.6
4- 19max Y
69.9
A
54
B
55.6
G66/02 102 79.4 54 50.8 37.3 27 16.7 12.7 11.3 55.4 10.7 39.7 68.7 115 92 46 32.5 4- 9
(A.B.P.T)
54
2- 4/8 B
30
A
底
18
Y
G67/02 102 79.4 54 50.8 37.3 27 16.7 12.7 11.3 55.4 10.7 39.7 68.7 115 92 46 32.5
35
14.3
12.7
14.3
型号 Model B4 B5 B6 B7 B8 B9 B10 B11 H1 H2 D1 D2 D3 D4 D5 T
2-M6/19 D1/17
(A.B.P.T)
19.2
板
1.6
140
36/1
G292/01 21.4 6.3 23 11.5 68 23.5 51 78.5 24 32 G1/2 34 10.5 10.5 M8 12 4- 15/23 160
G308/01 21.4 6.3 23 11.5 68 23.5 51 78.5 24 32 G3/8 28 10.5 10.5 M8 12

型号 Model D1 D2
G377/01 21.4 6.3 23 11.5 68 23.5 51 78.5 24 32 G3/8 28 10.5 10.5 M8 12
G172/01 G3/4 G1/4
G378/01 21.4 6.3 23 11.5 68 23.5 51 78.5 24 32 G1/2 34 10.5 10.5 M8 12
34
G172/02 M27X2 M14X1.5
Subplates
G534/01 21.4 6.3 23 11.5 74 12 46 80 27 39 G3/4 42 10.5 10.5 M6 16
G66/01 21.4 6.3 23 11.5 68 23.5 51 78.5 24 32 G3/8 28 10.5 10.5 M6 12
101.6 120
G67/01 21.4 6.3 23 11.5 68 23.5 51 78.5 24 32 G1/2 34 10.5 10.5 M6 14 88.1 110
65.9 77.5
G66/02 21.4 6.3 23 11.5 68 23.5 51 78.5 24 32 M18X1.5 28 10.5 10.5 M6 12 50 61.5
34.1
4-M10/19 22.5 21
G67/02 21.4 6.3 23 11.5 68 23.5 51 78.5 24 32 M22X1.5 34 10.5 10.5 M6 14 42 18.3
30 6.5
注：油口B不存在于底板G292/01和G308/01 P T
25/1
D2/13
(X.Y.L)
X
T P
X
2- 7max
(X.Y)
L 4- 19max
71.5
69.9
120
61.5
Y
96
L
12.7
A
55.6
4 B (A.B.P.T) B
54
54
A
1.6
Y
35
23
22
14.3
13 8
13
25
2- 4/8 2-M6/19
4- 9 160 30
47/1 D1/19
184
4- 15/28
型号 Model D1 D2
G174/01 G1 G1/4
59
G174/02 M33X2 M14X1.5
101.6 120
88.1 110
76.6 76
65.9 63
42 50 24
11 21
30 34.1
4-M10/19
18.3
P T
X
25/1
T P
X 2- 7max
G1/4"/13
(X.Y)
(X.Y.L) Y L
4- 19max
69.9
12.7
61
71.5
120
96
54
L
55.6
17.5
4 (A.B.P.T)
54
A B B A
1.6
22
20
35
35
13 9
Y
13
25
2- 4/8 2-M6/19
14.3
16-M8/16 19 17.5
160 30
4- 9 (A.B.P.T)
184 35
型号 Model D1 ΦD2 T 4- 15/28
G67/01-SE G1/2 34 15
型号Model 连接法兰至25MPa 件号 009 271 重量(千克) Weight(Kgs)
Connecting Part
59
G174/08 flange 至40MPa number 009 272 5.5
96 www.nshpv.com 97
Hanshang Hydraulic
规格25 Size 25 规格32 Size 32

205
130
112.5
94.3 120.5
76.8 105.6
37.5 53
168.5 168.5
81.8
29.2 147.5 152.5
48
25.5 17.3 2- 6.5 24.2 114.5 114.5 6
6-M12/25
5.6 9.3 76 77.5
57 41.5 39.5
Catalogue 2017
25/1 Y
T P Y 38 24.5
P T
8max G1/4/19 6-M20/35
22max
96.8
L 2- 10max
116
(X.Y.L)
92
74.5
3- 24.5max
74.5
(X.Y)
73
73
X X
底
A B A B
46
46
T P D2/12 Y P T
19
19
Y (X.Y.L)
3- 38max 34max 28/1
77 25.5 10max(X,Y,L) L
板
4- 11
17.5
17.5
D1/19
4- 47/1
(A.B.T) L (P)
121.4
100.6
159
197
4- 18/11 (A.B.P.T)
181
114.5
114.5
124
124
X
79.3
79.3
仅G153/01和G153/02 上有L孔 X A B B A
型号 Model D1
28.5
28.5
34
（用于液压对中）
35
35
L port is only for G 153/01 and G151/01 G1
G 153/02 (Hydraulic return)
2- 6.5/8
G153/01 G1 82.5
250 D1/22
222 G151/02 M33X2 147.5
Subplates
(A.B.P.T)
130
112.5
224.65 65/1
94.3
159 G153/02 M33X2 266.5
115.6
76.8 91.8 304.5
29.2 38 40.9
17.3 14.2 29.2 25/1
5.6 型号Model D1 D2
4- 18
G1/4"/13
(X.Y.L)
G157/01 G1 1/2 G3/8
Y
30
P G157/02 M48X2 M18X1.5
54
T Y P T
10max
(X.Y.L) L 22max(P) L
96.8
170
142
92
74.5
81
24.5max
85
73
A B
54
(A.B.T) X
46
X B A
19
11
7
17.5
190.5
77 D1/23 46
6-M12/25 (A.B.P.T)
168.5 199.5
100.6
46 130 D2/1
147.5 166.5
4- 14 114.5 129.5 45
67 76 63.5
型号 Model D1 D2 6.5
47 41.5 26.5
54
G154 G11/4 58
78
3- 28/1
G156 G11/2 65 G3/8"/12
4- 20 T P P T
G154 M42X2 58
10max
250 Y Y
222
G156 M48X2 65 (X.Y.L)
34max(P)
216
159
176
130 L 38max(A,B,T) L
131
114.5
114.5
124
94.3 B
159 A X
79.3
79.3
76.8
115.6 40.9 X B A
53
28.5
91.8
35
29.2 38
17.3 2- 6.5/8 14.2 29.2
5.6
3- 25/1
45°
45°
28.5
G1/4"/13 82.5 6-M20/35
Y (X.Y.L) 285 16-M16/26 40(A,B,P,T)
10max T P Y 325
P T L
(X.Y.L) 22max(P)
L
96.8
170
142
92
85
74.5
81
73
X
连接法兰用于底板G158/10
54
A B X
46
B A
19
52
4- 18 Subplate G158/10 for connecting flange

24.5max
11
7
17.5
(A.B.T)
6-M12/25 77 压力额定值 Working pressure 件号 Part number
52 M12/20 46
100.6
54
16MPa 303 901
79
46 130 32.5(A,B,P,T)
4- 14
32MPa 303 921
型号 Model 重量(千克) Weight(Kgs) 连接法兰 Connecting flange D1 4- 26 40MPa 303 931

54
78
G154/08 20 25MPa 009 176

4- 20
40MPa 009 177
98 www.nshpv.com 99
Hanshang Hydraulic
AM1E型压力表隔离阀
AM1E SERIES PRESSURE A M 1 E A 30 X 40 * *
GAUGE SHUTTER
Catalogue 2017
无=丁晴橡胶
V=氟橡胶
No code=NBR seals
V=FPM seals
符号 SYMBOL 附
AM1E型压力表隔离阀是手动操作的三通滑阀，它用于偶尔检 AM1E series valve is a three-way slide valve operated manually, This
Accessories
查主要工作压力。 series are used for checking a working pressure in hydraulic systems
occasionally.
工作压力(Mpa) Operating pressure(Mpa) 至30 / To 30

压力表显示范围(Mpa) Pressure Gauge Indicating(Mpa) 6.3；10；16；25；40
重量(千克) Weight(KGS) 1.4
NAS1638 9级和ISO4406 20/18/15级

固定底板安装尺寸 Subplate Installation dimensions
66
50
39
4-M6/12 55
8 9 39
4-M6/12
55
40
55
39
T P
2- 5
35
100 www.nshpv.com 101

Hanshang Hydraulic
作用与用途参照AED1型柱塞式压力继电器 For function and usage see the AED1 series piston pressure switch
AED4型压力继电器/ZAED4型压力继电器
Z
AED4O A OH 6
AED4 SERIES PRESSURE
SWITCH/ZAED4 SERIES
PRESSURE SWITCH
叠加式 Modular
Catalogue 2017
型号 Model
A=A口控制 B=B口控制P=P口控制
A、B=A、B双头控制
A=A port pilot B=B port pilot 附
符号 SYMBOL P=P port pilot A.B=A.B port pilot
以下规格与AED40参数相同件
P This specification is the same as AED40
6=6通径；10=10通径 6=Size 6；10=Size 10

30
OP安装尺寸 OP Installation Dimensions

AED4型压力继电器作用和用途同AED1型压力继电器相同。 The function and usage of AED4 series pressure switch are equivalent to
Accessories
AED1 series pressure switch. 3 2-M5/10
ZAED通径6叠加板 ZAED Size 6 subplate
技术参数 Technical data 64

40.5
27.8
19 41
工作压力(Mpa) Operating Pressure range(Mpa) 5；10；35 12.5 10.3 29
0.75
开关频率(次/分) Switching frequency(Time/min) 120
油温范围(℃) Fluid temperature range(℃) -20～80
16.25
重量(千克) AED4OA 0.7
P
26.55
Weight(KGS) 0.9 A
5.95
AED4OP B
32.5
31
44
29
3
T
NAS1638 9级和ISO4406 20/18/15级
4- 7 4- 5.4
4-M6/12
ZAED通径10叠加板 ZAED Size 10 subplate

91
AED4O P 10 10 Z14 2 V 54
50.8
18.5 37.3
附加说明 27 41
For further details 16.7
29
型号无=丁晴橡胶
3.2
Model V=氟橡胶
12
P=板式；A=管式；H=叠加式 No code=NBR seals for petroleum oils
P=Subplate mounting V=FPM seals for phosphate ester
6.3
P
A=Threaded connection
21.4
无=英制 2=公制
H=Modular mounting 5- 10.5
32.5
A B 3
系列号
46
70
29
70
Series number 小插头
压力等级 Pressure range (Mpa) 5;10;35 Small plug T T1
4- 6.6
4-M6/12

Hanshang Hydraulic
AED1型柱塞式压力继电器 LPS型压力继电器
AED1 SERIES PISTON LPS-01 PRESSURE SWITCH
PRESSURE SWITCH
Catalogue 2017
符号 SYMBOL
P S
AED1...O 符号 SYMBOL 附
P S 件
P
AED1...K T
AED1型柱塞式压力继电器为液—电压力继电器，用于某段油 AED1 series piston pressure switches with normally closed contacts, are LPS型柱塞式压力继电器，采用微动开关发讯，用于控制带电 LPS-01 series piston pressure switches are adopted micro-switch to control
Accessories
路达到调定压力时，压力继电器即发出电讯号，控制某些电气 used to activate an electrical contact at an adjustable pressure setting. 器的液压元件通断，使执行机构工作或停止。该型号压力继电 the start or stop of hydraulic components, it has characteristic of large
元件的通、断。实现系统的顺序动作或做安全保护。器电器压力控制范围大、操作方便、安装简单。 pressure control range ,easy operation and installation.
技术参数 Technical data 技术参数 Technical data
型号 Model AED1 K AED1 O

工作压力等级(Mpa) Operating Pressure range(Mpa) 5,10,35 5,10,35 型号 Model LPS
泄油口压力(Mpa) Drain port pressure(Mpa) 0.2 — 工作压力(Mpa) Operating Pressure(Mpa) 0.5-31.5
开关频率(次/分) Switching frequency(Time/min) 至300 To 300 至50 短时间至100 To 50 Up To100 连接螺纹 Connection threaded Z1/4
连接尺寸 Installation dimensions M14X1.5 G1/4 M14X1.5 G1/4 最高使用电压(V) Max.operating pressure(V) 240
重量(千克) AED1OA 0.9 开关频率(次/分) Switching frequency(Time/min) 至300 / To 300
Weight(KGS) AED1KA 0.8 重量(千克) Weight(KGS) 0.8
阀体（材料）表面处理钢件表面发黑处理 NAS1638 9级和ISO4406 20/18/15级
Valve body（Material）Surface treatment Steel Body Surface Black Oxide 油液清洁度/Oil cleanliness
NAS1638 9级和ISO4406 20/18/15级
AED1 K A 20 100 Z L24 2 V *

LPS 5 HS
无=丁晴橡胶
V=氟橡胶
No code=NBR seals
V=FPM seals
压力等级 Pressure range (Mpa) 5;10;35

无=电缆螺纹连接 No code=Inch Design No. 设计号
Z=带有地线的4级插头连接 2=Metric
Z6=带有地线的6级插头连接指示灯电压 Light voltage
L24=DC24
L110=AC110
L220=AC220
Mobile hydraulic valve 行走液压阀
Hanshang Hydraulic
HPLK安装尺寸 HPLK Installation Dimensions

HPLK 型液控单向阀
HPLK PILOT OPERATED
CHECK VALVES L3
L2
L1 S
Catalogue 2017
符号 SYMBOL
C1 X
D
V1
C1
向
阀
X
V1
型号 Model L1 L2 L3 V1 C1 X S φD
当V1口压力升高至弹簧设定压力时，阀芯被顶起脱离阀座， Flow is allowed to pass from V1 to C1 when pressure at V1 rises above the

油液从V1到C1可以自由流动，正常状态下从C1到V1阀是关 spring bias pressure and the poppet is pushed from its seat. The valve is
HPLK-1/4-20 29 78 101.5 G1/4" G1/4" 40 44
闭的，当X口的先导压力足够大时，先导油作用在先导活塞 normally closed (checked) from C1 to V1; when sufficient pilot pressure is
上推动阀芯脱离阀座油液可以从C1到V1自由流动，在阀处 present at X port, the pilot piston acts to push the poppet from its seat and HPLK-3/8-35 31.5 82 106 G3/8" G1/4" 41 45
于截止状态时，阀为零泄漏。 flow is allowed from C1 to V1. Precision machining and hardening processes
allow virtually leak-free performance in the checked condition. HPLK-1/2-50 36 85 120 G1/2" G1/4" 42 47
HPLK-3/4-100 39 90 131 G3/4" G1/4" 55 62
技术参数　Technical data
HPLK-1-150安装尺寸 HPLK-1-150 Installation Dimensions

型号 Model HPLK-1/4-20 HPLK-3/8-35 HPLK-1/2-50 HPLK-3/4-100 HPLK-1-150
最大流量（L/min）Max Flow rate（L/min） 20 35 50 100 150
最大工作压力（Mpa) Max operating pressure（MPa） 31.5 G1/4

V1
控制比/Pilot ratio 4.7:1 4.4:1 4.6:1 3.8:1 3.2:1 X C1
80
G1
G1
（钢体）表面镀白锌处理（Steel body）Surface clear zinc plating
油液清洁度 Oil cleanliness NAS1638 9级和ISO4406 20/18/15级 NAS1638 class 9 and ISO4406 class 20/18/15
51
70
115
170

Hanshang Hydraulic
VBPDE-38 安装尺寸/Installation dimensions

VBPDE-38 双向液压锁
VBPDE-38 DOUBLE-DIRECTION
HYDRAULIC LOCK
64
符号 SYMBOL = =
36
Catalogue 2017
== 30
C1 C2
==
V1 V2
9
方
向
40
C1
阀
φ12
V1 C2
V2
13
83
= =
130
==

G3/8 M8
V1 V2
17
30
油口尺寸Size of oil port
型号 Model VBPDE-38
V1、V2 G3/8
工作压力(Mpa) Operating pressure(Mpa) 31.5 C1、C2 Φ12mm
控制比 Pilot ratio 5.2:1
阀体（材料）表面处理（钢体）表面镀白锌处理
Valve body（Material）Surface treatment （Steel body）Surface clear zinc plating
166

Hanshang Hydraulic
安装尺寸 Installation Dimensions

MOP.06.6 多回路选择阀
MOP.06.6 FLOW DIVERTERS
D
73
Catalogue 2017
符号 SYMBOL
7
P1
C
19
19
P1
P1
P1
C
C
LA
方
6.5
VL
A
CD
A
37
37
A
12 P2 向
88
88
80
D
86.5
101
B
阀
P2
D
P2
37
D
P2
D
M8
VL
P1 P2
B
B
VL
VL
VL
47 7 8 48 O型圈/D.O-Ring φ17X2 31.5
A
5.5
MOP.06.6管式连接的多回路选择阀，最多可以5个元件连接 The stackable circuit selector valves, type MOP.06.6,allows one single drive B 61

在一起，供给6个回路工作。这种阀可以以最小的压力损失 of 6 users with 5 elements connected in series. As they are moved from high
LA=39.5(G3/8,M18X1.5) D.O 型圈 / D.O-Ring:
控制系统的油路。 performances solenoids they don't need the external drainage .
38.5(SAE8) M18X1.5/G3/8=Φ21X2
This valves can manage high hydraulic powers with a minimal pressure 37.5(G1/2,M22X1.5) M22X1.5/G1/2=Φ23.5X2
drop. SAE8=Φ 26X2
VL
CD
A
型号 Model MOP.06.6 B
元件 elements 通路 way A B
最大流量（L/min）Max Flow rate（L/min） 50 个数 No . of 长度(mm) Lengths (mm) P1 P2
A
1 6 64 - B
最大工作压力（Mpa) Max operating pressure（MPa） 25
2 8 128 174
阀体（材料）表面处理 P1 P2
（铸件）表面磷化处理/（casting）phosphating surface 3 10 192 238
Valve body（Material）Surface treatment A
C D B
4 12 256 302
5 14 320 366
P1 P2
多回路选择阀
Stackble circuit
selector valve
6通径 Size NG06 电压 Voltage
DC12;DC24
油口的个数（单个元件）叠加的元件的个数：1/2/3/4/5
No. of way(single element) QTY of elements:1/2/3/4/5
螺纹连接 Threaded connection 泄漏油外排
G 3/8 SAE 8 Externally drainage

Hanshang Hydraulic
MOPRN-06 安装尺寸/Installation dimensions
MOPRN-06 多回路选择阀
MOPRN-06 FLOW DIVERTERS
Catalogue 2017
符号 SYMBOL
方
向
阀

型号 Model MOPRN-06
最大流量（L/min）Max Flow rate（L/min） 50 LA=39.5(G3/8,M18X1.5) D.O 型圈 / D.O-Ring:

38.5(SAE8) M18X1.5/G3/8=Φ21X2
37.5(G1/2,M22X1.5) M22X1.5/G1/2=Φ23.5X2
SAE8=Φ 26X2
（铸件）表面磷化处理/（casting）phosphating surface
元件 elements 通路 way A B
个数 No . of 长度(mm) Lengths (mm)
1 6 64 -
特性曲线（在使用 HLP46 , 油=40℃±5℃时测得） 2 8 128 174
Characteristic curves（measured with HLP46，Voil=40℃±5℃） 3 10 192 238

4 12 256 302
5 14 320 366
MOPRN 06 6 I
多回路选择阀
Stackble circuit
selector valve
6通径 Size NG06 电压 Voltage
DC12;DC24
油口的个数（单个元件）叠加的元件的个数：1/2/3/4/5
No. of way(single element) QTY of elements:1/2/3/4/5
螺纹连接 Threaded connection 泄漏油内排
G 1/2 SAE 8 Internal drainage

Hanshang Hydraulic

ZVH6　多回路选择阀
ZVH6 FLOW DIVERTERS
Catalogue 2017
符号 SYMBOL
方
向
阀

型号 Model ZVH6
最大流量（L/min）Max Flow rate（L/min） 50
　ZVH6 Z5L
电压 Voltage DC12;DC24
Characteristic curves（measured with HLP46，Voil=40℃±5℃） N=有故障检查按钮;无=没有故障检查按钮特别要求单独列出
N concealed Special requirements to
No Code Without concealed be briefly specified
Z5L=带灯大方形插头螺纹连接 Threaded connection
Z5L=Large quadrate plug with light G 3/8

Hanshang Hydraulic

KVH6 多回路选择阀
KVH6 FLOW DIVERTERS
Catalogue 2017
符号 SYMBOL
73
C A DB 方
向
6.5
阀
19
25.5
P1 P2 P1
39.5
C C
A
37
37
80
86.5

A
101
37
D P2 B D
B
型号 Model KVH6
12
4-M8
31.5 15 47 7.5
阀体（材料）表面处理 64
5.5
（铸件）表面磷化处理/（casting）phosphating surface 62
KVH
型号 Model
6通径 Size 06 电压 Voltage DC12;DC24
螺纹连接 Threaded connection 泄漏油内排

G 1/2 SAE 8 Internal drainage

Hanshang Hydraulic

2KVH 多回路选择阀
2KVH FLOW DIVERTERS
37 28
符号 SYMBOL
C D
79.5
Catalogue 2017
61
F
a b
29
方
15
A
向
B M8(Z=2)
a b 阀
37 34
10±0.2 53
P1 P2
D C

E F
85±0.2
109
47
型号 Model 2KVH
A B
31
12
P2 P1
（铸件）表面磷化处理/（casting）phosphating surface 37 44
102 73
油液清洁度 Oil cleanliness NAS1638 9级和ISO4406 20/18/15级 NAS1638 class 9 and ISO4406 class 20/18/15 181.5
特性曲线（在使用 HLP46 , 油=40℃±5℃时测得） 2KVH Z5L

型号
Model 附加说明
螺纹连接 Threaded connection For further details
G 3/8 G 1/2 SAE 8
电压 Voltage DC12;DC24 Z5L=Large quadrate plug with light

Hanshang Hydraulic

SVK10　多回路选择阀
SVK10 FLOW DIVERTERS
113
8 114
37 42
14
Catalogue 2017
符号 SYMBOL
100.5
67
46
33.5
方
M8X12
向
阀
10
100
100 130
239.5
max.26
58 42

C D
A B D1
型号 Model SVK10 P1 P2 D2
L
nx73
C D D1.0型圈/D1.0-Ring
最大工作压力（Mpa) Max operating pressure（MPa） 25 A B G1/2、M22X1.5=Φ26.5X2.65
73
50
G3/4、M27X2=Φ32X2
P1 P2 L
阀体（材料）表面处理 SAE10=Φ29X2.65
100 D2.0型圈/D2.0-Ring
油液清洁度 Oil cleanliness NAS1638 9级和ISO4406 20/18/15级 NAS1638 class 9 and ISO4406 class 20/18/15 G1/2、M22X1.5=Φ17X2
11.5
G3/4、M27X2=Φ17X2
max.26
18.5 67
SAE10=Φ16X1.5

SVK10 Z5L
型号 Model
螺纹连接 Threaded connection
G 1/2 G 3/4 SAE 10 特别要求单独列出
Special requirements to be briefly specified
电压 Voltage DC12;DC24
叠加的元件的个数　QTY of units
Z5L=带灯大方形插头 N1=1个(one unit) N2=2个(two units)
Z5L=Large quadrate plug with light N3=3个(three units) N4=4个(four units)

Hanshang Hydraulic

HVC-3/2-10　二位三通电磁换向阀
HVC-3/2-10 DIRECTIONAL VALVES
LINE MOUNTING
Catalogue 2017
符号 SYMBOL
方
向
阀

型号 Model HVC-3/2-10
HVC-3/2-10 Z5L

型号
Model 附加说明
螺纹连接 Threaded connection For further details
G 3/8 G 1/2 SAE 8
电压 Voltage DC12;DC24 Z5L=Large quadrate plug with light

Hanshang Hydraulic
KVH6-MB 安装尺寸/Installation dimensions
KVH6-MB 手动式多回路选择阀
18°
KVH6-MB MANNUALLY OPERATED
FLOW DIVERTER
Catalogue 2017
符号 SYMBOL
141.5
方
31.5
向
阀
62
B A
51.5
37 39.5

165
技术参数 Technical data 86.5
80
工作压力(Mpa) Operating pressure(Mpa) P1.P2.A.B.C.D: 25 Y: 5

铸件表面磷化处理
64
47
Valve body（Material）Surface treatment casting phosphating surface P2 P1
Y
7.5
6.5 7
KVH MB 37 19 12.5
89
101
M8
型号 Model 无= 带定位
6通径 Size 06 No code= With detent
12
手动式 Manually Operated G 1/2 SAE 8
D
37 25.5

Hanshang Hydraulic

HDR 带遥控的直动式溢流阀
HDR DIRECT OPERATED PRESSURE
RELIEF VALVES
Catalogue 2017
符号 SYMBOL
T V1
溢
流
阀
V1
HDR系列带遥控口的溢流阀是一种直动式的溢流阀，用来限 HDR Series relief valves, with remote control port, are direct operated poppet
Relief Valves
制系统的压力，它具有结构紧凑、性能优良、工作可靠、低 type used to limit pressure in a hydraulic system. It has characteristics of
噪音和使用寿命长等特点，被广泛运用于小流量系统。 compact structure, high performance, reliable work, low noise, and long
service life. These series are widely applied to many lower flow systems.
型号 Model HDR-1/4-25 HDR-3/8-50 HDR-1/2-80 HDR-3/4-120 HDR-1-220

型号 Model L1 L2 L3 L4 L5 O P N M I H φD V1 T
最大流量（L/min）Max Flow rate（L/min） 25 50 80 120 220

HDR-1/4-25 14 30 46 60 90 6 48 30 60 15 30 6.8 G1/4"
最大工作压力（Mpa) Max operating pressure（MPa） 31.5

HDR-3/8-50 18 35 52 70 115 6.25 48 32 60.5 17.75 35.5 6.6 G3/8"
（钢体）表面镀白锌处理/（Steel body）Surface clear zinc plating
Valve body（Material）Surface treatment HDR-1/2-80 18 39.5 58 78 127 6 58 35 70 17.5 35 6.6 G1/2"
HDR-3/4-120 20 45 70 90 149 8 54 40 70 20 40 8.6 G3/4'

Hanshang Hydraulic
IHDR 安装尺寸/Installation dimensions
IHDR 双向溢流阀
IHDR DUAL CROSS RELIEF VALVE
Catalogue 2017
符号 SYMBOL
B1 B 溢
流
阀
A1 A
G
B1 B
Relief Valves
2-φD
=
=
L3
L3
L1
L2
=
=
型号 IHDR-3/8 IHDR-1/2
A1 A
最大流量(L/min) Max .flow rate(L/min) 45 60
油液清洁度 MAS1638 9级和ISO4406 20/18/15级
阀体（材料）表面处理（钢体）表面镀白锌处理
Valve body（Material）Surface treatment （Steel body）Surface clear zinc plating
= P = I
M
H
= =
型号 Model G L1 L2 L3 H P M D I
IHDR-3/8 G3/8 205 85 38 30 54 70 9 S4
IHDR-1/2 G1/2 216 85 44 32 60 88 9 S4

Hanshang Hydraulic

HOV 型平衡阀(开式平衡)
HOV SERIES COUNTERBALANCE
VALVES FOR OPEN CENTRE
符号 SYMBOL
H
Catalogue 2017
I
C1 C2 C1
C2
平
L8 衡
L7 阀
L1 L2
V2 V1
V2 V1
O
当V2口的压力升高到单向阀调定的压力时,阀芯被推离阀 When pressure at V2 rises above the spring bias pressure, the check seat
Counterbalance valves
座，油液可以从V2到C2自由流动,当作用在C2口的负载压 is pushed away from the piston and flow is allowed from V2 to C2. When 3- D
力足够大时,作用在阀芯环形面积差上的力大于弹簧设定的 load pressure at C2 rises above the pressure setting, the direct operated,
M
力时,油液可以从C2口流向V2口,阀起溢流作用。根据阀所 differential area, relief function is activated and flow is relieved from C2 to V2.
具有的先导压力比，V1-C1的先导压力与弹簧的设定压力 With pilot pressure at V1-C1, the pressure setting is reduced in proportion
N
相比被比例的减小直到阀芯打开,油液可以C2口到V2口自 to the stated ratio of the valve, until opening and allowing flow from C2 to
由流动,弹簧腔与V2口相通，V2口的背压要附加到弹簧设 V2. The spring chamber is drained to V2,and any back-pressure at V2 is
定压力上。 additive to the pressure setting in all functions. C2 C1
L4
L5
技术参数　Technical data L3 L6
V1 C1
型号 Model HOV-3/8-50 HOV-1/2-80 HOV-3/4-120 型号 Model L1 L2 L3 L4 L5 L6 L7 L8 O P N M I H φD V2 C2
HOV-3/8-50 18 61 10 32 34 48 95 145.5 5.5 41 28 56 15 30 7 G3/8"
最大流量（L/min）Max Flow rate（L/min） 50 80 120
HOV-1/2-80 18 61 10 32 34 51.5 95 147.5 10 41.5 32.5 65 18.75 32.5 7 G1/2"
最大工作压力
31.5
（Mpa) Max operating pressure（MPa） HOV-3/4-120 30 84 10 - 30.5 70 130 192.5 10 70 45 90 22.5 45 10.5 G3/4"
先导比/Pilot ratio 4.3:1 4.3:1 6.8:1

Hanshang Hydraulic

HOW型双向平衡阀(开式平衡)
HOW SERIES DUAL COUNTERBALANCE
VALVES FOR OPEN CENTRE
Catalogue 2017
符号 SYMBOL
C1 C2
平
衡
阀
A B
HOW系列双向平衡阀通过对C1口和C2口的控制来调节进 It provides static and dynamic control of load by regulating the flow IN and
出执行器的流量,从而达到对负载进行动态与静态的控制, OUT of the actuator, through ports C1 and C2.This valve module includes
这类阀包含两部分,每部分都由一个单向阀和一个带先导相 2 sections, each one composed by a check and a relief valve pilot assisted
互控制的溢流阀组成,单向阀允许油液正向自由流向执行器, by pressure in the opposite line: the check section allows free flow into the
反向则截止,先导压力相互交叉控制,溢流阀的设定压力被比 actuator, then holds the load against reverse movement; with pilot pressure
例的减小,直到阀口被打开允许油液反向流动,V1口或V2口的 applied at the line across, the pressure setting of the relief is reduced in
背压会附加到弹簧设定压力上。 proportion to the stated ratio until opening and allowing controlled reverse
flow. Back-pressure at V1 or V2 is additive to the pressure setting in all
functions.
φD V1 C1
型号Model L1 L2 L3 L4 L5 L6 L7 L8 L9 O P N M I H V2 C2
HOW-3/8-50 18 94 10 32 34 76 110 130 229 6 40 28 56 15 30 7 G3/8"
型号 Model HOW-3/8-50 HOW-1/2-80 HOW-3/4-120 HOW-1-160 HOW-1/2-80 18 94 9.5 32.3 34.5 76.5 106.5 130 237 9.7 41.3 33 65 19 38 6.6 G1/2"
流量范围 (l/min) Flow Range (l/min) 50 80 120 160 HOW-3/4-120 23 109 10 - 32.5 102.5 135 155 280 10 70 45 90 22.5 45 10.5 G3/4"
最大压力 (MPa) Max.Peak Pressure (MPa) 31.5 HOW-1-160 26 158 10 - 62 128 190 210 345.5 10 70 45 90 25 50 10.5 G1"
先导比例 Pilot Ratio 4.3:1 4.3:1 6.8:1 3:1

Hanshang Hydraulic

OCBW型板式双作用平衡阀(开式平衡)
OCBW SERIES FLANGEABLE DUAL 2- 6
COUNTERBALANCE VALVE
FOR OPEN CENTRE
30
60
Catalogue 2017
符号 SYMBOL
4- 5.5 2- 6/20
P A B T
40.5 平
27.8 衡
19 阀
16.25
5.95
0.75
10.3
P1 A1 B1 T1 P1
22.5
26.55
32.5
31
45
A1 B1
钢体阀。A→A1, B→B1通过单向阀自由开启；A1→A, Flangeable dual counterbanlance valve. Free flow A towards A1 and
T1
B1→B通过单向阀密闭，由可调先导阀控制开启。连接方 B towards B1, perfect seal A1 towards A and B1 towards B through
式：ISO CETOP3 建议应用于开式平衡控制。 adjustable check valves and operated pilot valve. Flanging: ISO CETOP 3
S13 75.5
Recommended for open centre controls.
151
275
型号 Model OCBW-43
先导比例 Pilot Ratio 4.3:1
压力调节范围(MPa) Adjustance Pressure Range (MPa) 10-35
标准设定(MPa) Standard Setting(MPa) 35
流量范围 (l/min) Flow Range (l/min) 5-45
最大压力 (MPa) Max.Peak Pressure (MPa) 35
（铸件）表面镀镍处理/（Casting）Surface nickel plated

Hanshang Hydraulic

HSDI-OMP　双向溢流阀
HSDI-OMP DUAL CROSS OVER
RELIEF, FLANGEABLE TO MOTOR
符号 SYMBOL
V1 V2
Catalogue 2017
液
压
马
达
控
制
阀
C1 C2
HSDI-OMP 双向溢流阀可以直接安装在丹佛斯OMP-OMR系 HSDI-OMP flangeable on SAUER-DANFOSS orbital motors OMP-OMR
Hydraulic motor control valves

列摆线马达上。 series.
技术参数 Technical Data
型号/Model HSDI-OMP
最大工作压力/ Max operating pressure (MPa) 20
最大流量/ Max flow rate (L/min) 30
（铝体）表面氧化处理/（Aluminum body）Surface oxidation treatment
油液清洁度 Oil cleanliness NAS1638 9级和ISO4406 20/18/15级 NAS1638 class 9 and ISO4406 class 20/18/15 弹簧　Springs 油口尺寸 Port Size
压力调节范围　Adj.press. range MPa(psi) V1-V2 G1/2"
5-22(725-3000) C1-C2 Φ13

Hanshang Hydraulic
模块式电磁换向阀 MDWE6 系列换向阀模块 MWE6

MANIFOLD SOLENOID MODULAR DIRECTIONAL
DIRECTIONAL VALVES MDWE6 SERIES VALVE ELEMENTS MWE6
符号 SYMBOL
模
Catalogue 2017
块
A B 式
电
磁
P
换
向
T 阀
组
MWE6型方向控制阀是电磁铁操纵的换向阀，用以油液控 MWE6 series directional control valves are soleniod operated directional
Modular Solenoid Directional Valves

制的开启、停止和换向。 spool valves,these valves are used to the start,stop and direct fiow.
通径/ Size 6
工作压力/ Operating pressure (MPa) 31
MDWE6阀组系列是一种新型的模块式换向阀组，主 MDWE6 series modular directional valves is a new 油液清洁度 Oil cleanliness NAS 1638级和ISO4406 20/18/15级 NAS class 1638和ISO4406 class 20/18/15
要由泵侧模块，换向阀模块，叠加阀，侧盖模块以及相应 design including Pump side inlet element,directional

valve element,modular valve element,side outlet element
的安装配件组成。模块式阀组可以不通过油路块而直接与
and mounting kit. Hose can be connected with MDWE6
油管连接，这种紧凑的结构设计使阀组安装尺寸更小，同 valve directly without manifold,the compact design of the
时也节省了油路块的成本。 structure make the mounting size smaller and save the
cost of manifold .

Hanshang Hydraulic
机能符号 Spool symbols 外形及安装尺寸 External Dimensions and Fittings

HKV 型液控单向阀
For example:
the spool symbol "E" with position "a"
Ordering code ...EA...
模
Catalogue 2017
块
式
电
磁
换
向
阀
P/T port with O-rings 组

订单选型 Ordering Details
MWE 6 E 60 DC24 N Z5L * * *
型号 Model
附加说明
1、无=不带手动换向模块无=丁晴橡胶 V=氟橡胶
2、EL=带手动换向模块 No code=NBR seals
1.No code=Without hand lever V=FPM seals
2.EL=With hand lever 无=无插装节流器 B0.8=节流孔径0.8
B10=节流孔径1.0;B12=节流孔径1.2 当油口A,B为G3/8时剖视图当油口A,B为SAE8时剖视图 1.5:1
Sectional view of A,B oil port G3/8 Sectional view of A,B oil port SAE8 1.5:1
ZC=防水插头
ZC=Waterproof connector
N=有故障检查按钮;无=没有故障检查按钮
无=G3/8 No code=G3/8
N concealed
电压 Voltage DC12;DC24 ;AC110;AC220 No Code Without concealed

Hanshang Hydraulic
泵侧模块 POH-MDWE6-1312-G 3/8-DC 12 泵侧模块 TWMDE6-G 1/2-DC 12

PUMP SIDE INLET ELEMENTS MANIFOLD PUMP SIDE INLET ELEMENTS
SOLENOID DIRECTIONAL VALVES TWMDE6
POH-MDWE6-1312
模
Catalogue 2017
P 符号 SYMBOL
块
P2
P1 式
电
磁
M
符号 SYMBOL P1
P 换
向
T1
T T1
阀
T
组

工作压力/ 0perating pressure(MPa) 31.5
最大流量 (L/min) Max flow rate (L/min) 50
P最大流量/ P Max flow rate (L/min) 80
P1最大流量/ P1 Max flow rate (L/min) 40 工作压力 (Mpa) 0perating pressure (Mpa) 31.5
P2最大流量/ P2 Max flow rate (L/min) 40

油口 Port 尺寸 Size
油口 Port 尺寸 Size P,T(英制 Inch) G1/2
P,T(英制 Inch) G3/8 M(英制 Inch) G1/4
外形尺寸和安装 External Dimensions and Fittings

当油口P,T为
G3/8时剖视图
Sectional view
of P,T oil port G3/8 当油口P,T为当油口M为
G1/2时剖视图 G1/4时剖视图
Sectional view Sectional view
of P,T oil port G1/2 of M oil port G1/4

Hanshang Hydraulic
泵侧模块 PSRMWE6-G 3/8-DC 12 泵侧模块 PTMWE6-G 3/8

PUMP SIDE INLET ELEMENTS WITH PRIMARY PUMP SIDE INLET ELEMENTS PTMWE6
PRESSURE RELIEF VALVE PSRMWE6
模
Catalogue 2017
符号 SYMBOL 符号 SYMBOL
块
P1 T1 式
电
磁
换
向
P T 阀
组
技术参数　Technical data 技术参数　Technical data

工作压力/ 0perating pressure(MPa) 31.5 最大流量 (L/min) Max.flow rate (L/min) 50
工作压力 (Mpa) 0perating pressure (Mpa) 25
油口 Port 尺寸的Size
NAS 1638级和ISO4406 20/18/15级
英制 Inch G3/8,G1/2 油液清洁度 / 0il cleanliness
P,T NAS class 1638级和ISO4406 class 20/18/15
美制 American SAE8(3/4''16 UNF)
英制 Inch G1/4
M
美制 American SAE4(7/16''20 UNF)
外形尺寸和安装 External Dimensions and Fittings 2-M6深12
29
7.5
19.5 30
0
69-0.1
当油口M为
G1/4时剖视图
Sectional view
of M oil port G1/4 3-M8深12
A-A
P1
45
70
32
18
14
0.5
T1 2-G3/8
1.5
17.5
当油口M为 2-φ25
SAE4时剖视图
10 24.5
Sectional view
of M oil port SAE4 49
T—刻字 Laser printing P—刻字 Laser printing
T P
14.5
当油口P,T为当油口P,T为当油口P,T为
A A
G1/2时剖视图 SAE8时剖视图 G3/8时剖视图
Sectional view Sectional view of Sectional view
of P,T oil port G1/2 P,T oil port SAE8 of P,T oil port G3/8
17 35

Hanshang Hydraulic
侧盖模块 TMWE6-G 3/8 MFV 型叠加式单向节流阀

OUTLET ELEMENTS MFV SERIES MODULAR
TMWE6 THROTTLE CHECK VALVES
模
Catalogue 2017
符号 SYMBOL 符号 SYMBOL
MFV1/6/30S
块
式
MFV1/6/30SA MFV1/6/30SB
A B A B A B
电
A1 B1 A1 B1 A1 B1
磁
P MFV1/6/30S2
A B
MFV1/6/30S2A
A B
MFV1/6/30S2B
A B
换
T
T1 向
阀
A1 B1 A1 B1 A1 B1 组
叠加式节流阀通过改变节流口断面大小来调节油路流量， MFV series modular check/throttle valves are used to restrict flow in

技术参数　Technical data 从而实现流量控制。 one direction while allowing free-flow .
最大流量 (L/min) Max.flow rate (L/min) 50 技术参数 Technical data
工作压力 (Mpa) 0perating pressure (Mpa) 25

型号 Model MFV
NAS 1638级和ISO4406 20/18/15级

油液清洁度 / 0il cleanliness 最大流量/ Max flow rate (L/min) 40
NAS class 1638级和ISO4406 class 20/18/15
工作压力/ Operating pressure (MPa) 31.5
油液清洁度 Oil cleanliness NAS 1638级和ISO4406 20/18/15级 NAS class 1638和ISO4406 class 20/18/15
MFV 1 6 30 * * * *
附加说明 For further detials

Pylome
型号 Model 无=丁晴橡胶 V=氟橡胶
No code=NBR seals
螺纹转接 Threaded connections 1=G3/8 V=FPM seals
D D1 H H1 S 无＝A，B口都有节流阀
通径：6 Size：6
G3/8 Φ25 13 15 1.3 A＝A口带节流阀
系列号30＝通径6
B＝B口带节流阀
Series number 30＝Size6
G1/2 Φ30 15 17 0.2 No code＝A and B ports with throttle valves
S=进口节流；S2=出口节流 A＝A ports with throttle valve
S=Meter-in control;S2=Meter-out control B＝B ports with throttle valve

Hanshang Hydraulic

HKV 型液控单向阀 MCV 型叠加式液控单向阀
MCV SERIES MODULAR PILOT
CONTROLLED CHECK VALVES
模
Catalogue 2017
符号 SYMBOL
块
式
MCV1/6-50 MCV1/6A-50 MCV1/6B-50 电
A B A B A B 磁
换
向
A1 B1 A1 B1 A1 B1
阀
组
MCV型叠加式液控单向阀，它可用于关闭一个或 MCV series are pilot operated style sandwich valves.

两个工作油口且无泄漏持续工作时间长，稳定性好。 These valves used to close one or two actuator ports.
型号 Model MCV
先导比 Pilot ratio 3:1
MCV 1 6 * 50 * *
型号 Model
螺纹转接 Threaded connections 1=G3/8
通径：6 Size：6
无＝A，B口都有单向阀
A＝A口带单向阀
B＝B口带单向阀 No code=NBR seals
No code＝A and B ports with check valves V=FPM seals
A＝A ports with check valve 系列号50＝通径6
B＝B ports with check valve Series number 50＝Size 6

Hanshang Hydraulic

HKV 型液控单向阀 MPV 型叠加式溢流阀
MPV SERIES MODULAR PRESSURE
RELIEF VALVES DIRECT ACTING
MCV1/6-50
模
Catalogue 2017
符号 SYMBOL
块
MPV1A MPV1B
式
MPV1
O-Ring 21.95X1.78 A B A B A B 电
A 52 B
22-� 25 磁
换
向
S24
46
34
A1 B1 A1 B1 A1 B1 阀
组
2-G3/8
MPV型叠加式溢流阀为直动式溢流阀，可为系统提供过 MPV series pressure relief valves are direct operated poppet

37 8
4-=9
载保护。 type,it can supply overload protection for hydraulic systems.
4-=5.5
53 44
69
83
型号 Model MPV
MCV1/6A-50(MCV1/6B-50)
O-Ring 21.95X1.78
A 订单选型 Ordering Details
52 B
22-� 25
S24
46
34
MPV 1 * * *
2-G3/8
37 8 无=丁晴橡胶 V=氟橡胶
4-=9
型号
4-=5.5
Model No code=NBR seals V=FPM seals

53 44
无＝A，B口都有溢流阀
69 A＝A口带溢流阀;B＝B口带溢流阀
螺纹转接 No code＝A and B ports with relief valves
82 Threaded connections 1=G3/8 A＝A ports with relief valve;B＝B ports with relief valve

Hanshang Hydraulic

HKV 型液控单向阀 MOV 型叠加式平衡阀
MOV SERIES MODULAR
COUNTERBALANCE VALVES
FOR OPEN CENTER
模
Catalogue 2017
符号 SYMBOL
块
式
A
MOV1
A
MOV1A
A
MOV1B 电
B B B
磁
换
向
A1 B1 A1 B1 A1 B1 阀
组
MOV型叠加式平衡阀通过对A口和B口的控制来调节进出执 It provides static and dynamic control of load by regulating the flow IN and
行器的流量,从而达到对负载进行动态与静态的控制,这类阀 OUT of the actuator, through ports A and B.This valve module includes 2

包含两部分,每部分都由一个单向阀和一个带先导相互控制 sections,each one composed by a check and a relief valve pilot assisted
的溢流阀组成,单向阀允许油液正向自由流向执行器,反向则 by pressure in the opposite line: the check section allows free flow into the
截止,先导压力相互交叉控制,溢流阀的设定压力被比例的减 actuator, then holds the load against reverse movement; with pilot pressure
小,直到阀口被打开允许油液反向流动,A1口或B1口的背压会 applied at the line across,the pressure setting of the relief is reduced in pro-
附加到弹簧设定压力上。 portion to the stated ratio until opening and allowing controlled reverse flow.
Back-pressure at A1 or B1 is additive to the pressure setting in all functions.
型号 Model MOV
先导比 Pilot ratio 4.3:1
MOV 1 * * *

型号 No code=NBR seals V=FPM seals
Model
无＝A，B口都有平衡阀
A＝A口带平衡阀;B＝B口带平衡阀
No code＝A and B ports with counterbalance valves
螺纹转接 A＝A ports with counterbalance valve
Threaded connections 1=G3/8 B＝B ports with counterbalance valve

Hanshang Hydraulic

HKV 型液控单向阀过渡板 MFV1-02
MFV1-02 is the transition part, only used for the below situation:
Directional valve with manual+Transition part+Modular check
throttle valve.(Direct stacking)
For item code is MWE6**EL+MFV1-02+MFV
O-Ring�φ21.95X1.78
4- 9
模
Catalogue 2017
符号 SYMBOL
8
块
式
A B
电
63
磁
33
换
15
MOV1 向
4- 5.5
A1 B1 阀
2-φ25 2-G3/8 组
A B

46
34

HKV 型液控单向阀
37
53
57 88
203.6
MOV1A
MOV1B
O-Ring�φ21.95X1.78 O-Ring�φ21.95X1.78
4- 9 4- 9
8
8
65
65
31
31
4- 5.5 4- 5.5
2-φ25 2-G3/8 2-φ25 2-G3/8
A B A B
46
46
34
34
37 37
53 53
88 88
145 145

Hanshang Hydraulic
Note Note
Catalogue 2017
Note

1ab367c9 PDF

Uploaded by

Copyright:

Available Formats

1ab367c9 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

1ab367c9 PDF

Uploaded by

Copyright:

Available Formats

MOV1 MOV1A MOV1B

特性曲线（在使用 HLP46 , 油=40℃±5℃时测得）

Pressure Control Valves

该阀体积小、结构紧凑、流量特性好、噪音小、压力 2.5;5;10;20;31.5;40Mpa. It has characteristics of compact structure,high

PBD K 0.4 0.5 0.9 2.1

NAS1638 9级和ISO4406 20/18/15级

PBD*K插入阀连接尺寸 PBD*K Dimensions for cartridge L

Pressure Control Valves

特性曲线（在使用 HLP46 , 油=40℃±5℃时测得）

PBW...A...6X/... PBW...A...6X/...X PBW...A...6X/...Y PBW...A...6X/...XY

PB...6X/... PB...6X/...X PB...6X/...Y PB...6X/...XY

Pressure Control Valves

Charaterastics of Min.Setting Pressure.bypass presure and flow

重量(千克) PB 3.2 4.2 5.2

特性曲线（在使用 HLP46 , 油=40℃±5℃时测得） 板式底板安装尺寸 Subplate mounting 管式连接尺寸 Threaded connections

Characteristic of inlet Pressure and flow

Pressure Control Valves

Attention！ 板式底板安装尺寸 Subplate mounting

特性曲线（在使用 HLP46 , 油=40℃±5℃时测得）

PB10G M22×1.5 G 1/2" 34 9 85 14 62 125 27 10 62

1.通径 10 Size 10 PB25G M42×2 G 1 1/4" 56 9 100 18 72 138 40 13 66

2.通径 20 Size 20 PB30G M48×2 G 1 1/2" 61 9 100 18 72 138 40 13 66

PB W 10 * * 1 60 31.5 * * DC24 N Z5L * * PBE/PBEK型比例溢流阀

Pressure Control Valves

No code=Inch thread; 2=Metric

安装尺寸 Installation dimensions

Pressure Control Valves

工作压力(Mpa) Operating pressure(Mpa) 31.5

调节压力(Mpa)Set pressure(Mpa) 至5，10，20，31.5/Up to 5，10，20，31，5 0.02 A 0.02 A

重量(千克) Weight(KGS) 0.22 0.3 0.35 64(配合深度)

NAS1638 9级和ISO4406 20/18/15级

底板安装尺寸 Subplate Installation dimensions

Pressure Control Valves

底板安装尺寸 Subplate Installation dimensions

PZ型先导式顺序阀用来控制执行元件的先后动作顺序，以实 PZ type pilot-operated sequence valve is used to control the sequencing,

Pressure Control Valves

NAS1638 9级和ISO4406 20/18/15级

60=60 Series; 6X=6X Series

底板安装尺寸 Subplate Installation dimensions

Directional Control Valves

技术参数 Technical data

板式安装尺寸 Subplate dimensions

Directional Control Valves

通径(板式) Size DSV10 DSL10 DSV20 DSL20 DSV30 DSL30

通径见表格 工作压力(Mpa) Operating pressure(Mpa) 31.5

底板安装尺寸 Subplate mounting dimensions 管式连接尺寸 Threaded connection dimensions

Directional Control Valves

机能符号 Spool symbols

Directional Control Valves

技术参数 Technical data

Directional Control Valves

Installations are the same with 铸件 表面磷化处理 casting phosphating surface

P Valve body（Material）Surface treatment

4-M5/10 4- 7 NAS1638 class 9 and ISO4406 class 20/18/15

Characteristic curves（measured with HLP46，Voil=40℃±5℃）

机能符号 Spool symbols DWG10底板安装尺寸 DWG10 Subplate Installation Dimensions

4 DWG 10 E 30 * DC24 Z5L * * *

Directional Control Valves

通径 10 Size 10 无=丁晴橡胶 V=氟橡胶

PBDK插入阀连接尺寸 PBDK Dimensions for cartridge L

特性曲线（在使用 HLP46 , 油=40℃±5℃时测得）板式底板安装尺寸 Subplate mounting 管式连接尺寸 Threaded connections

Attention！板式底板安装尺寸 Subplate mounting

通径见表格工作压力(Mpa) Operating pressure(Mpa) 31.5

Installations are the same with 铸件表面磷化处理 casting phosphating surface

特性曲线：4DWHG22...型（在使用 HLP46 , 油=40℃±5℃时测得）特性曲线：4DWHG32...型（在使用 HLP46 , 油=40℃±5℃时测得）

机能符号系列号 20=通径10; 50=通径16,25,32

DWMG 型手动换向阀特性曲线 Characteristic curves DWMG6

NAS1638 9级和ISO4406 20/18/15级无=不带节流器