How To Set Network Settings From The CLI - PBX Platforms - Documentation PDF
How To Set Network Settings From The CLI - PBX Platforms - Documentation PDF
How To Set Network Settings From The CLI - PBX Platforms - Documentation PDF
4. From the computer determine which USB port the console cable is plugged into.
a. For Windows: open up device manager and expand the ports area, see below example:
7. The terminal screen should appear with login prompt. The username and password for root login will be mentioned on Quick Start Guide included in the box.
By default login username is root and password is sangoma . Use nano editor to change the default network configuration file. The command is
nano /etc/sysconfig/network-scripts/ifcfg-eth0
8. Change following parameters to set the IP , Subnet Mask and Default Gateway Address
Do not change other parameters if there are any.
BOOTPROTO=static
> IPADDR= <Your IP Address>
GATEWAY= <Your Default Gateway Address>
NETMASK= <Your Network Subnet Mask>
https://wiki.freepbx.org/display/PPS/How+to+set+Network+Settings+from+the+CLI 1/3
01/06/2020 How to set Network Settings from the CLI - PBX Platforms - Documentation
Press Enter to complete the save and then Ctrl-X to exit the editor.
Connect your network cable to default LAN port of your device. The link should come up.
You should be able to ping your default gateway address and that verifies your successful local network connection.
So far , you have setup your appliance on local network only. You need internet connection to Activate this deployment.
9. You need to set your Domain Name Servers in the following file. This is important to bring your system on Internet.
nano /etc/resolv.conf
You need to add nameserver <Your Name Server> line for each DNS server entry.
https://wiki.freepbx.org/display/PPS/How+to+set+Network+Settings+from+the+CLI 2/3
01/06/2020 How to set Network Settings from the CLI - PBX Platforms - Documentation
If you receive successful ping response . You are good to continue your further setup using web browser to Activate the deployment.
Aucune étiquette
Site fonctionnant grâce à une licence de projet Open Source Atlassian Confluence gratuite accordée à FreePBX.org.
Evaluez Confluence dès aujourd'hui.
Cette installation de Confluence s'exécute avec une licence Gliffy gratuite. Évaluez le plugin Gliffy Confluence pour votre Wiki !
https://wiki.freepbx.org/display/PPS/How+to+set+Network+Settings+from+the+CLI 3/3