Microsoft Exambible 70-740 Dumps V2019-Sep-05 by Jerome 132q Vce PDF
Microsoft Exambible 70-740 Dumps V2019-Sep-05 by Jerome 132q Vce PDF
Microsoft Exambible 70-740 Dumps V2019-Sep-05 by Jerome 132q Vce PDF
Get the Full 70-740 dumps in VCE and PDF From SurePassExam
https://www.surepassexam.com/70-740-exam-dumps.html (331 New Questions)
Microsoft
Exam Questions 70-740
Installation, Storage, and Compute with Windows Server 2016
NEW QUESTION 1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the
stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have two servers that run Windows Server 2016.
You have a server named Server1 that runs Windows Server 2016. Server1 has the Hyper-V server role and Docker installed.
You pull the Microsoft/iis Docker image to Server1.
You need to view the available space in the Microsoft/iis Docker image. Solution: You run the following commands.
docker run –name container1 –d Microsoft/iis docker exec –i container1 cmd.exe
dir
Does this meet the goal?
A. Yes
B. No
Answer: A
NEW QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the
stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have two servers that run Windows Server 2016.
You plan to create a Network Load Balancing (NLB) cluster that will contain both servers. You need to configure the network cards on the servers for the planned
NLB configuration.
Solution: You configure the network cards to be on a separate subnet and to have static IP addresses. You configure the cluster to use unicast.
Does this meet the goal?
A. Yes
B. No
Answer: B
NEW QUESTION 3
You plan to deploy three servers that will run Windows Server 2016. The servers will be configured as
shown in the following table.
You need to ensure that you can use all of the available space on each disk. What is one of the disks that you must initialize as a GPT disk?
A. Disk2 on Server3
B. Disk1 on Server2
C. Disk3 on Server2
D. Disk1 on Sever3
Answer: D
NEW QUESTION 4
You have a Nano Server named Nano1.
Nano1 is configured to perform real-time protection scans by using Windows Defender.
You need to ensure that all of the files located in D:\App1\Data are excluded from the real-time protection
scans.
What should you do?
Answer: B
NEW QUESTION 5
DRAG DROP
You install a new Nano Server named Nano1. Nano1 is a member of a workgroup and has an IP address of 192 1698 1.10.
You have a server named Server1 that runs Windows Server 2016.
From Server1, you need to establish a Windows PowerShell session to Nano1.
How should you complete the PowerShell script? To answer, drag the appropriate cmdlets to the correct targets Each cmdlet may be used once, more than once,
or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation:
NEW QUESTION 6
You have a Nano Server named Nano1.
Which cmdlet should you use to identify whether the DNS Server role is installed on Nano1?
A. Find-NanoServerPackage
B. Get-Package
C. Find-Package
D. Get-WindowsOptionalFeature
Answer: B
NEW QUESTION 7
HOTSPOT
Your network contains an Active Directory forest The forest contains two sites named Site1 and Site2. Site1 contains 10 domain controllers Site1 and Site2
connect to each other by using a WAN link
You run the Active Directory Domain Services Configuration Wizard as shown in the following graphic.
Answer:
Explanation:
NEW QUESTION 8
You deploy a Hyper-V server named Served in an isolated test environment The test environment is prevented from accessing the Internet Server1 runs the
Datacenter edition of Windows Server 2016. You plan to deploy the following guest virtual machines on the server
Which activation model should you use for the virtual machines'?
Answer: B
NEW QUESTION 9
HOTSPOT
Your network contains an Active Directory domain named contoso com. The domain contains a DNS server named Server1
You enable Response Rate Limiting on Server1.
You need to prevent Response Rate Limiting from applying to hosts that reside on the network of 10.0.0.0/24.
Which cmdlets should you run? To answer, select the appropriate options in the answer area
Answer:
Explanation:
NEW QUESTION 10
You have a Nano Server named Nano1.
You deploy several containers to Nano1 that use an image named Image1. You need to deploy a new container to Nano1 that uses Image1.
What should you run?
Answer: D
NEW QUESTION 10
You have an Active Directory domain named Contoso com The domain contains servers named
Server1 and Server2 that run Windows Server 2016. You install the Remote Access server role on Server1. You install the Network Policy and Access Services
server role on Server2. You need to configure Server1 to use Server2 as a RADIUS server.
What should you do?
Answer: A
NEW QUESTION 13
HOTSPOT
You have a server that runs Windows Server 2016.
You run the commands shown in the following output.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
Explanation:
NEW QUESTION 15
Your network contains an Active Directory domain named contoso com. The domain contains two servers named Server1 and Server2 that have the same
hardware configuration
You need to asynchronously replicate volume F: from Server1 to Server2. What should you do?
Answer: A
NEW QUESTION 19
Your network contains an Active Directory forest named contoso com The forest contains a member server named Server1 that runs Windows Server 2016
Server1 is located in the perimeter network You install the Active Directory Federation Services server role on Server1. You create an Active Directory Federation
Services (ADFS) farm by using a certificate that has a subject name of sts.contoso com
You need to enable certificate authentication from the Internet on Server1
Which two inbound TCP ports should you open on the firewall? Each correct answer presents part of the solution
A. 389
B. 443
C. 3389
D. 8531
E. 49443
Answer: BE
NEW QUESTION 24
You need to create highly available storage spaces that connect to directly attached storage on the hosts Which cmdlet should you use?
A. Enable-ClusterStorageSpacesDiret
B. Set-StoragePool
C. Add-ClusterDisk
D. Update-ClusterVirtualMachineConfiguration
Answer: A
NEW QUESTION 26
HOTSPOT
Your network contains an Active Directory forest named contoso.com. The forest contains an Active Directory Federation Services (AD FS) farm.
You install Windows Server 2016 on a server named Server2
You need to configure Server2 as a node in the federation server farm
Which cmdlets should you run? To answer, select the appropriate options in the answer area
Answer:
Explanation:
NEW QUESTION 27
DRAG DROP
You have a server named Server1 that runs Windows Server 2016.
You need to deploy the first node cluster of a Network Controller cluster
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the
correct order
Answer:
Explanation:
NEW QUESTION 30
You have an application named App1 App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment You need to ensure that the traffic is
distributed evenly among the virtual machines that host App1 What should you include in the environment?
A. Network Controller and Windows Server Network Load Balancing (NLB) nodes
B. Network Controller and Windows Server Software Load Balancing (SLB) nodes
C. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes
D. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes
Answer: D
NEW QUESTION 32
Your company has 10 offices. Each office has a local network that contains several Hyper-V hosts that run Windows Server 2016. All of the offices are connected
by high speed, low latency WAN links.
You need to ensure that you can use QoS policies for Live Migration traffic between the offices. Which component should you install?
Answer: CE
NEW QUESTION 35
You have a server named Server1 that runs Windows Server 2016. Server! is a Hyper-V host that hosts a virtual machine named VM1. Server1 has three network
adapter cards That connect to a virtual switch named vSwitch1.
You configure NIC Teaming on VM1 as shown in the exhibit.
You need to ensure that VM1 will retain access to the network if a physical adapter card fails on Server1. What should you do?
Answer: A
NEW QUESTION 39
HOTSPOT
You have a machine named VM1 that runs Windows Server 2016 VM1 is a Remote Desktop Services (RDS) server.
You need to ensure that only TCP port 3389 can be used to connect to VM1 over the network.
Which command should you run on the Hyper-V host? To answer, select the appropriate options in the answer area.
Answer:
Explanation:
NEW QUESTION 40
You have a server named Server1 that runs Windows Server 2016 You need to configure Server1 as a multitenant RAS Gateway. What should you install on
Server1?
Answer: B
NEW QUESTION 41
DRAG DROP
You have a physical server named Server1 that runs Windows Server 2016 Server1 is a Hyper-V host On Server1, you create a virtual machine named VM1 that
runs Windows Server 2016.
You plan to install the Hyper-V server role on VM1.
You need to ensure that you can configure VM1 to host virtual machines
How should you complete the Windows PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more
than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation:
NEW QUESTION 45
HOTSPOT
You have a server named Server1 that runs Windows Server 2016 and has the Hyper-V server role installed You open Disk Management on Server1 as shown in
the following graphic
You plan to configure Disk13 as a pass-through disk for a generation 1 virtual machine
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic
Answer:
Explanation:
NEW QUESTION 48
HOTSPOT
Your company has a testing environment that contains an Active Directory domain named contoso com The domain contains a server named Server1 that runs
Windows Server 2016. Server1 has IP Address Management (IPAM) installed IPAM has the following configuration.
The IPAM Overview page from Server Manager is shown in the IPAM Overview exhibit.
For each of the following statements, select Yes if the statement is true Otherwise, select No
Answer:
Explanation:
NEW QUESTION 49
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 and a member server named
Server2.
Server1 has the DNS Server role installed Server2 has IP Address Management IPAM installed The IPAM server retrieves zones from Server1 as shown in the
following table
Answer:
Explanation:
NEW QUESTION 52
DRAG DROP
Your network contains an Active Directory domain named contoso com The domain contains two servers named Server1 and Server2 that run Windows Server
2016.
Server1 has IP Address Management (IPAM) installed Server2 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed.
You need to integrate IPAM and VMM
Which types of objects should you create on each server? To answer, drag the appropriate object types to the correct servers Each object type may be used once,
more than once, or not at all You may need to drag the split bar between panes or scroll to view content
Answer:
Explanation:
NEW QUESTION 57
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the
series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have a Hyper-V host named Server1 that runs Windows Server 2016 and a two-node scale-out file server cluster named Cluster1
A virtual machine named VM1 runs on Server1
You need to migrate the storage on VM1 to Cluster1 Which tool should you use?
Answer: G
NEW QUESTION 62
Note: This question is part of a series of questions that use the same similar answer choices An
answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details
provided in a question apply only to that question
You have three servers named Server1, Server2. Server3 that run Windows Server 2016 Server1 and Server2 have the Hyper-V server role installed Server3 has
the iSCSI Target Server role service installed.
You need to create a Hyper-V cluster Which tool should you use first?
Answer: H
NEW QUESTION 66
Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the
series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 contains a virtual machine named VM1.
You need to ensure that you can use nested virtualization on VM1. What should you run on Server1?
Answer: F
NEW QUESTION 68
In this section, you'll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you
must determine whether the solution meets the stated goals Any of the solutions might solve the problem. It is also possible that none of the solutions solve the
problem.
Once you answer a question in this section, you will NOT be able to return to it As a result. these questions will not appear in the review screen
Note This question is part of a series of questions that present the same scenario Each question in the series contains a unique solution Determine whether the
solution meets the stated goals.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016 All
domain controllers run Windows Server 2012 R2
Contoso com has the following configuration
You plan to deploy an Active Directory Federation Services (AD FS) farm on Served and to configure device registration You need to configure Active Directory to
support the planned deployment. Solution You upgrade a domain controller to Windows Server 2016 Does this meet the goal?
A. Yes
B. No
Answer: B
NEW QUESTION 71
In this section, you'll see one or more sets of questions with the same scenario and problem Each
question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the
problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the
solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration
You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1
must resolve queries from all other DNS clients
Solution From Windows Firewall with Advanced Security on Server1, you create an inbound rule Does this meet the goal?
A. Yes
B. No
Answer: A
NEW QUESTION 75
In this section, you'll see one or more sets of questions with the same scenario and problem Each
question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the
problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the
solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration
You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1
must resolve queries from all other DNS clients
Solution From a Group Policy object (GPO) in tne domain, you modify the Network List Manager Policies
Does this meet the goal?
A. Yes
B. No
Answer: B
NEW QUESTION 78
In this section, you'll see one or more sets of questions with the same scenario and problem Each
question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the
problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the
solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration
You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1
must resolve queries from all other DNS clients
Solution From Windows PowerShell on Setver1, you run the Add-DnsServerTrustAnchor cmdtel Does this meet the goal?
A. Yes
B. No
Answer: A
NEW QUESTION 80
Note: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have
a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have two servers that run Windows Server 2016.
You plan to create a Network Load Balancing (NLB) cluster that will contain both servers. You need to configure the network cards on the servers for the planned
NLB configuration.
Solution: You configure the network cards to be on the same subnet and to have static IP addresses. You configure the cluster to use multicast.
Does this meet the goal?
A. Yes
B. No
Answer: A
Explanation:
References:
https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load- balancing
NEW QUESTION 81
Note: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have
a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have two servers that run Windows Server 2016.
You plan to create a Network load Balancing (NLB) cluster that will contain both servers. You need to configure the network cards on the servers for the planned
NLB configuration.
Solution: You configure the network cards to be on the same subnet and to have dynamic IP addresses. You configure the cluster to use multicast.
Does this meet the goal?
A. Yes
B. No
Answer: B
Explanation:
References:
https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load- balancing
NEW QUESTION 82
Note This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have
a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are a server administrator at a company named Contoso, Ltd.
Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.
Solution: You implement live migration by using Host1 and Host2. Does this meet the goat?
A. Yes
B. No
Answer: B
NEW QUESTION 83
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the
stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
Your network contains an Active Directory forest
You install Windows Server 2016 on 10 virtual machines.
You need to deploy the Web Server (IIS) server role identically to the virtual machines.
Solution: You use Windows PowerShell Desired State Configuration (DSC) to create a default configuration and then you apply the configuration the virtual
,
A. Yes
B. No
Answer: A
Explanation:
References:
https://www.simple-talk.com/sysadmin/powershell/powershell-desired-state-configuration-the- basics/
NEW QUESTION 84
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the
stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
Your network contains an Active Directory forest
You install Windows Server 2016 on 10 virtual machines.
You need to deploy the Web Server (IIS) server role identically to the virtual machines.
Solution: From a Group policy object (GPO), you create an application control policy, and then you apply the policy to the virtual machines.
Does this meet the goal?
A. Yes
B. No
Answer: B
NEW QUESTION 89
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the
stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
Your network contains an Active Directory forest
You install Windows Server 2016 on 10 virtual machines.
You need to deploy the Web Server (IIS) server role identically to the virtual machines.
Solution: You create a software installation package, and then you publish the package to the virtual machines by using a Group Policy object (GPO)
Does this meet the goal?
A. Yes
B. No
Answer: B
NEW QUESTION 91
You have an Active Director domain named Contoso.com. The domain contains servers named Server 1, Server2 and Server3 that run Windows Server 2016
Server1 and Server2 are nodes in a Hyper V cluster named Cluster1. You add a Hyper V Replica Broker role named Broker 1 to Cluster 1
Server3 is a Hyper-V server. A virtual machine named VM1 runs on Server3.
Live Migration is enabled on all three servers and it is configured to use Kerberos authentication only. You need to ensure that you can perform the migration of
VM1 to Server2
What should you do?
Answer: D
Explanation:
References:
https://technet.microsoft.com/en-us/library/jj134199(v=ws.11).aspx#BKMK_Step1
NEW QUESTION 93
You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016. Each server has a single 4-TB SATA hard disk.
To each server you attach a new 4-TB SATA hard disk.
You need to create a new storage cluster that uses Storage Spaces Direct. The storage pool must contain all of the new disks.
Which command should you run before you enable Storage Space Direct?
Answer: B
NEW QUESTION 94
Note This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question
presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of Repeated Scenario:
Your network contains an Active Directory domain named contoso.com The functional level of the forest and the domain is Windows Server 2008 R2 All servers in
the domain run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.
A. ReFS
B. NTFS
C. CVFS
D. exFAT
Answer: A
NEW QUESTION 99
HOTSPOT
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question
presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
A company named Contoso, Ltd. has several servers that run Windows Server 2016. Contoso has a Hyper-V environment that uses failover clustering and
Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
The WSUS deployment contains one upstream server that is located on the company’s perimeter network and several downstream servers located on the internal
network. A firewall separates the upstream server from the downstream servers.
You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
The CIO of Contoso identifies the following requirements for the company’s IT department:
- Deploy a failover cluster to two new virtual machines.
- Store all application databases by using Encrypted File System (EFS).
- Ensure that each Windows container has a dedicated IP address assigned by a DHCP server.
- Produce a report that lists the processor time used by all of the processes on a server named Server1 for five hours.
- Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
- Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
You need to create a Data Collector Set to meet the requirement for the processor time report.
What command should you run to create the Data Collector Set? To answer, select the appropriate options in the answer area.
Answer:
Explanation:
Answer: D
A. Set-PackageSource
B. Install-PackageProvider
C. Add-AppxProvisionedPackage
D. Save-NanoServerPackage
E. Add-WindowsPackage
Answer: BD
A. Add-VMNetworkAdapteiAd
B. Set-VMNetworkAdapter
C. New-VMResourcePool
D. Set-VMNetworkAdapterRoutingDomamMapping
Answer: A
Answer:
Explanation:
Answer:
Explanation:
You plan to use Windows Server Backup to back up all of the data on Server1. You create a new volume on Server1.
You need to ensure that the new volume can be used as a backup target. The backup target must support incremental backups.
Solution: You mount the volume to C:\Backup, and you format the volume by using exFAT. Does this meet the goal?
A. Yes
B. No
Answer: B
A. Yes
B. No
Answer: A
Explanation:
References: https://docs.microsoft.com/en-us/windows-server/storage/data- deduplication/understand
Answer:
Explanation:
A. From the physical server, log on to the Nano Server Recovery Console.
B. Install the Microsoft-Nano'Server-Host-Package package.
C. Run me Format-Vokime cmdlet and specify the -FileSystem switch.
D. Install the Microsoft NanoServef-Storage-Package package.
Answer: C
A. New-NetQosPolicy
B. Set-NetworkController
C. New-NetTransportFilter
D. New-StorageQosPolicy
Answer: A
Explanation:
References: https://technet.microsoft.com/en-us/library/hh967471(v=wps.630).aspx
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
Answer:
Explanation:
Answer: F
Explanation: References:
http://windowsitpro.com/hyper-v/make-vm-highly-available-windows-server-2012
Answer: F
Explanation: References:
https://technet.microsoft.com/en-us/library/jj612868(v=ws.11).aspx
Answer:
Explanation:
Explanation:
References:
https://technet.microsoft.com/en-us/library/hh974722(v=wps.630).aspx
A. An iSCSI target
B. A virtual SCSI controller
C. A virtual fibre channel adapter
D. A virtual IDE controller
Answer: B
Explanation: References:
https://blogs.msdn.microsoft.com/clustering/2015/05/27/testing-storage-spaces-direct-using-windows-server-2016-virtual-machines/
A. Yes
B. No
Answer: B
Explanation: References:
https://blogs.technet.microsoft.com/mempson/2007/11/08/how-to-find-out-who-has-your-fsmo- roles/
Answer: D
A. 80
B. 443
C. 3389
D. 8530
Answer: D
Answer: B
Explanation: A group has been modified. Nothing has been deleted. Therefore, answers A and D will not work. Answer C would work if it was an authoritative
restore, but not a non-authoritative restore.
The solution is to recover an earlier copy of the group from a backup or active directory snapshot by using DSadmain.
Answer:
Explanation:
https://technet.microsoft.com/itpro/powershell/windows/ipam/add-ipamdiscoverydomain https://technet.microsoft.com/itpro/powershell/windows/ipam/add-
ipamserverinventory https://technet.microsoft.com/itpro/powershell/windows/ipam/invoke-ipamserverprovisioning
The DHCP scopes are configured as shown in the Scopes Exhibit. (Click the Exhibit button.)
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
Explanation:
https://technet.microsoft.com/en-us/library/dn268500(v=ws.11).aspx
On Server1, you create a security policy for User1. The policy grants the IPAM DHCP Scope Administrator Role with the \Global access scope to the user.
Which actions can User1 perform? To answer, select the appropriate options in the answer area.
Answer:
Explanation:
https://technet.microsoft.com/en-us/library/dn268500(v=ws.11).aspx
A. Set-NetUDPSetting
B. New-StorageQosPolicy
C. Set-SmbBandwidthLimit
D. Set-NetTCPSetting
Answer: C
Answer: B
Answer: B
Explanation: References:
https://rlevchenko.com/2015/09/07/workgroup-and-multi-domain-clusters-in-windows-server- 2016/
Answer: A
A. NUMA spanning
B. live migration
C. Dynamic Memory
D. Smart Pathing
Answer: BC
Explanation: References:
https://blogs.technet.microsoft.com/virtualization/2015/10/13/windows-insider-preview-nested-virtualization/
Answer:
Explanation:
Use the drop-down menus to select the answer choice that completes each statement based on the
information presented in the graphic.
Answer:
Explanation:
References:
https://msdn.microsoft.com/en-us/library/aa369665(v=vs.85).aspx
Answer:
Explanation:
A. Production
B. Standard
Answer: B
Explanation: Standard checkpoints capture the state, data, and hardware configuration of a running virtual machine and are intended for use in development and
test scenarios.
A. Hyper-V Container
B. Windows Server Container
Answer: B
Answer: A
A. Any of these
B. Windows PowerShell
C. Remote Server Administration Tools (RSAT)
D. Server Manager
Answer: A
A. Dynamic
B. Hyper-V Port
Answer: A
A. Paused
B. Off
C. Saved
D. Running
Answer: C
Answer:
Explanation:
Answer:
Explanation:
You add a file share named Share1 to FS1. You add a file share named Share2 to FS2.
Which UNC paths can you use to access each share? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
References:
https://blogs.technet.microsoft.com/canitpro/2013/12/10/step-by-step-scale-out-file-shares-and- continuously-available-file-services/
https://robertsmit.wordpress.com/2018/02/21/clustering-fileserver-data-deduplication-on- windows-2016-step-by-step-sofs-winserv-refs-
windowsserver2016-dedupe/
A. Bootstrap.ini
B. Config.ini
C. Dockerfile
D. Unattend.txt
Answer: C
A. --runtime
B. --entrypoint
C. --privileged
D. --isolation
E. --expose
Answer: D
Explanation:
https://docs.microsoft.com/en-us/virtualization/windowscontainers/deploy-containers/system- requirements
You need to ensure that you can install the operating system on VM1 by using Windows Deployment Services.
What should you do?
Answer: D
A. On Server1, run the Set-VmNetworkAdapterIsolation cmdlet and specify the –MultiTenantStack Off parameter.
B. On VM1, run the Set-VMNetworkAdapter cmdlet and specify the –MacAddressSpoofing Off parameter.
C. On VM1, run the Set-VmNetworkAdapterIsolation cmdlet and specify the –MultiTenantStack On parameter.
D. On Server1, run the Set-VMNetworkAdapter cmdlet and specify the –MacAddressSpoofing On parameter.
Answer: C
A. Yes
B. No
Answer: B
A. FailureConditionLevel
B. QuarantineDuration
C. ResiliencyPeriod
D. ResiliencyLevel
Answer: D
Explanation: References:
https://blogs.msdn.microsoft.com/clustering/2015/06/03/virtual-machine-compute-resiliency-in-windows-server-2016/
Answer:
Explanation:
Answer:
Explanation:
A. Update-StoragePool
B. Set-SRPartnership
C. vssadmin revert shadow
D. Clear-FileStorageTier
Answer: B
Explanation: References:
https://docs.microsoft.com/en-us/windows-server/storage/storage-replica/server-to-server-storage-replication
Answer: D
A. Yes
B. No
Answer: A
A. Yes
B. No
Answer: B
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1. Solution: You enable the Data Exchange integration service for
VM1.
Does this meet the goal?
A. Yes
B. No
Answer: B
Explanation: References:
https://technet.microsoft.com/en-us/library/dn798297(v=ws.11).aspx
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1. Solution: You connect VM1 to an internal virtual switch.
Does this meet the goal?
A. Yes
B. No
Answer: B
A. Yes
B. No
Answer: A
Your network contains an Active Directory domain. The domain contains a new file server named Server1 that runs a Server Core installation of Windows Server
2016.
Server l has an ReFS-formatted volume D: and an NTFS-formatted volume E:. the- volumes do not contain any data.
You Install the Data Deduplication role service on Server l.
You need to implement Data Deduplicalion for volumes on Di and E:.
Solution; From Windows PowerShell. you run Format-Volume D: -FlleSystem NTFS and Enable- DeDupVolume-Volume D:,E:.
Does this meet the goal?
A. Yes
B. No
Answer: A
A. Yes
B. No
Answer: B
Answer:
Explanation:
Answer: D
• Produce a report that lists the processor time used by all of the processes on a server named Server 1 for five hour.
Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
• Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
End of Repeated Scenario.
You need to modify the Hyper V cluster to meet the load balancing requirement for the virtual machine. Which command should you run?
Answer: A
A. Enable-CluslerStorageSpacesDircct
B. Update-CluslerVirtualMachineConfiguration
C. Add-CluslerDisk
D. Set-Storage Pool
Answer: A
A. failureConditionLevel
B. QuarantineDuration
C. Resiliency Period
D. ResiliencyLevel
Answer: B
Answer:
A. Run the Resize-IscsiVirtualDisk cmdlet and specify the -ComputerName Server2 parameter.
B. Run the Resize-IscsiVirtualDisk cmdlet and specify the -ComputerName Server1 parameter.
C. Run the Resize-Partition cmdlet and specify the -ComputerName Server1 parameter.
D. Run the Resize- Partition cmdlet and specify the -ComputerName Server2 parameter.
Answer: B
Explanation: The Resize-IscsiVirtualDisk cmdlet resizes a virtual disk either by expanding or compacting an existing virtual disk.
The -ComputerName parameter specifies the computer name, or IP address, of the remote computer, if this cmdlet is run on a remote computer. If you do not
specify a value for this parameter, the cmdlet uses the local computer.
Answer:
Explanation:
Answer:
Answer: G
Answer: C
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1. Solution: You enable the Guest services integration service for
VM1.
Does this meet the goal?
A. Yes
B. No
Answer: A
Your network contains an Active Directory domain named contoso.com. The domain contains three clusters named FC1, FC2, and FC3.
The domain contains servers that run Windows Server 2016. The servers are configured as shown in the following table.
Answer:
A. From Windows PowerShell, run the Write-EventLog cmdlet and specify the-EventID parameter and the -Source parameter.
B. From Event Viewer, create a custom view that has a filter for the event IDs.
C. From Event Viewer, create a subscription that has a filter for the event IDs.
D. From Task Scheduler, use Create Task to create one task that includes triggers for both event IDs.
E. From Windows PowerShell, run the Get-SMServerEvent cmdlet and pipe the output to the Start- NetEventSession cmdlet.
F. From Performance Monitor, add an Event Trace Session data collector that uses the Microsoft- Windows-Eventlog provider.
Answer: D
Answer:
Explanation: If you want to return the device back to its original state, you will need to stop the VM and issue the
following cmdlets:
Remove-VMAssignableDevice Mount-VMHostAssignableDevice
You can then re-enable the device in device manager.
References: https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/deploy/deploying-storage-devices-using-dda#removing-a-device-and-returning-
it-to-the-host
You need to ensure that you can perform a live migration of VM1 from Host1 to Host2. Solution: You move Host2 to the contoso.com domain.
Does meet the goal?
A. Yes
B. No
Answer: B
A. Yes
B. No
Answer: B
Answer:
Explanation: References:
https://glennsarti.github.io/blog/getting-started-with-windows-containers/ https://docs.microsoft.com/en-us/virtualization/windowscontainers/manage-
containers/container-networking
A. File Explore.
B. Add-Windows Image
C. Nano Server Image Builder
D. Dism
Answer: D
You need to activate VM1 by using Automatic Virtual Machine Activation (AVMA).
Which command should you run? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Answer: A
Answer:
Explanation: References:
https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/user-guide/checkpoints
Answer: D
Explanation:
References:
https://docs.microsoft.com/en-us/windows/security/threat-protection/windows-defender-antivirus/configure-proc
You discover that when you back up Server1, VM1 temporarily pauses.
You need to ensure that you can back up Server1 without causing downtime on VM1. What should you do?
Answer: E
Explanation:
References:
https://www.starwindsoftware.com/blog/hyper-v-backup-challenges-windows-server-2016-needs-to-address
* 70-740 Most Realistic Questions that Guarantee you a Pass on Your FirstTry
* 70-740 Practice Test Questions in Multiple Choice Formats and Updatesfor 1 Year