Receiver REC 300 Digital: Operating Instructions
Receiver REC 300 Digital: Operating Instructions
Receiver REC 300 Digital: Operating Instructions
en Operating instructions
en
Operating instructions
The STABILA REC 300 Digital is a simple-to-use receiver for the rapid capture of
rotating lasers. The REC 300 Digital receiver can receive laser beams from rotation
lasers, even when these are invisible to the naked eye.
The distance to the “on line“ position is indicated digitally.
We have endeavoured to explain the unit‘s handling and functioning in as clear
and comprehensible manner as possible. If, however, you still have any unanswered
questions, we should be pleased to provide advice over the telephone at any time
on the following telephone number: +49 / 6346 / 309-0
Main components IP 67
13 12
9 11
100 mm
4”
8
5 9
1
5
3 10
2
1. 2.
Automatic
ON/OFF button calibration
Press the ON/OFF button (1) quickly once (2sec) to switch the instrument off.
If the instrument is not used, it will automatically switch itself off after 30 minutes.
Audio signals
Setting the volume
The volume is increased/decreased by repeatedly pressing the button (2):
Loud (a), soft (b) or off. (a)
2 If the instrument is set to “silent” only a short beep is emitted
when the laser beam is received.
(b)
en
Height difference display: digital
The distance to the “on line“ position
is indicated by digital figures
Measuring modes
Setting the accuracy level The icons appear
permanently
Fine Coarse
2x ± 1,0 mm ± 5,0 mm
The display appears only briefly ± 0,05 in ± 0,2 in
Accuracy button ± 1/16 in ± 1/4 in
1 sec
± 0,005 ft ± 0,02 ft
The setting selected remains in memory after the unit is switched off.
Setting the measuring unit The display appears only briefly 1 sec
2x
Measuring
unit button
The setting selected remains in memory after the unit is switched off.
en
Replacing the batteries
LCD
3
Bracket
1. Securing screw - for securing to
the rear side of the receiver.
2. Guide cones - assist in quickly and
securely fixing the bracket to the 1
2 4
receiver. 5
3. Reading reference
4. Securing knob. Turning the securing
knob fixes / releases the clamp with
the receiver to/from the levelling staff.
5. Moveable clamping jaw - for fixing to the levelling staff.
en
Care and maintenance
Cleaning: Please do not remove dust and dirt from the receiving or display window
by using dry cloths or abrasive materials as this procedure scratches the windows.
A soft cloth and mild soap and water are effective.
The unit may be submerged under water or sprayed with a low pressure hose if
necessary. Do not use any other fluids other than water or glass- cleaner, as they
may attack polymer components.
Prohibited Uses
- Operation without instruction.
- Operation other than the intended uses.
- Opening the detector, except the battery compartment.
- Modification or conversion of the detector.
Important information
- The person in charge of the detector must understand the instructions in this
manual and ensure other users do also.
- Periodically carry out test measurements, particularly after the detector has
been subjected to abnormal use and before and after important measurements.
Technical data
Accuracy Fine: ± 1,0 mm 0,05 in 1/16 in 0,5/100 ft
Coarse: ± 5,0 mm 0,20 in 1/4 in 2,0/100 ft
Detectable Spectrum: 610 nm - 780 nm
Beeper Volumes: Loud: ~ 105 dBA Low: ~ 85 dBA
Batteries: 2 x 1,5V Mignon cells Alkaline , Size AA,LR 6
Operating life: 70 hours
Automatic Shut Off: 30 minutes
Operating temperature range: -20°C to +60°C
Storage temperature range: -40°C to +70°C
Subject to technical modifications.
USA
Canada STABILA Inc.
332 Industrial Drive
South Elgin, IL 60177
1.800.869.7460
www.stabila.com