Belt Drive LH: Projectionsmeth.1 ISO5456-2
Belt Drive LH: Projectionsmeth.1 ISO5456-2
Belt Drive LH: Projectionsmeth.1 ISO5456-2
A A
950
C C
160
445
B B B B
61.5
DN300 Top edge belt
X Lth=300
~500 Space required
730
Space required for drive and
for load cell
60
Space required load cell servicing
40
1178
for belt servicing
tensioning
760
Space required
for lateral
∅190
408
408
C belt change C
A A
Section A-A
E E
6895
250 445 850 1500 1500 1500 800 25
25
Flange discharge hood ∅12
load carrying capacity: Section B-B
1000N Section C-C
F 3100N 1300N 2000N 2000N 2500N 1020 F
730 730
345 330 345 25
∅1
4x300=1200
∅18 30 345 330 345
1485
4x300=1200
30
46
∅18 ∅18
1366
1660
1416
1710
345
446
345
150
∅45
13x66=858
1020
1070
950
G G
330
3100N 1300N 2000N 2000N 2500N
Z
330
950
625
475
345
25
345
Stated Load Are Dead Loads
150 150
25 500 11x500=5500 250 300
25
950 950
H 1070 1020 H
~120
be installed directly on the floor. 60 free flowing,
∅14 Flow Properties
If the weighfeeder will be placed otherwise, not adherent
max. 800
futher safety equipment will be needed to ∅299 for M12 - 8.8
ensure the conformtiy with the above ∅314 Dedusting air General tolerances ISO 2768-mK
125
70
mentioned directive. approx. 250m³/h The reproduction, distribution and Material Weight [ kg ] Scale of Origin Document Status
L utilization of this document as well L
Belt change as the communication of its x x 1:20 50
contents to others without express
Mounting-method authorization is prohibited.
Technical Reference Materialmaster Origin Size Language
Torsional stress (per support) by firm JACOB Offenders will be held liable for the - A1 EN
payment of damages. All rights
during leteral belt change - ca. 3000 Nm Cable junction point reserved in the event of the grant Responsible department Created by, date 2020-01-27
of a patent, utility model or
design. 490 A.Lach
Required pretightening force of fixing Product/Project Classificat. Approved by, date 2020-01-27
screws M12 - 8.8: 40000N - 80 Nm tightening torque VK-5000119439-1 R.Thomasberger
Projectionsmeth.1 Title, Supplementary Title
ISO5456-2
Weighfeeder MULTIDOS MTD-E 1260, T09
Mounting surface compression loadability under Weighfeeder MULTIDOS MTD-E 1260, T09
M supports min. 20 N/mm²
System of Units:
SI Metric
M
ISO 80000-1
ACAD
Change Number Revision Version Part Document Document Type Document Number Sheet
801199 B 02 001 DWG V935604B01 1-1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
CSD3476--Date:2020-01-27--Time:14:40:12--V:02