Q.PLUS-G4.3 280-290: Q.Antum Solar Module
Q.PLUS-G4.3 280-290: Q.Antum Solar Module
Q.PLUS-G4.3 280-290: Q.Antum Solar Module
3 280-290
Q.ANTUM SOLAR MODULE
high snow (5400 Pa) and wind loads (4000 Pa). HOT-SPOT PROTECT
(HSP)
TRACEABLE QUALITY
(TRA.Q ™)
MAXIMUM COST REDUCTIONS ANTI LID TECHNOLOGY
EN (ALT)
Up to 10 % lower logistics costs due to higher EN
module capacity per box.
MOD:27898 photon.info/laboratory
11/2016
1
APT test conditions according
to IEC/TS 62804-1:2015,
method B (−1500 V, 168 h)
2
See data sheet on rear
for further information.
THE IDEAL SOLUTION FOR:
Rooftop arrays on Rooftop arrays on Ground-mounted
residential buildings commercial / industrial solar power plants
buildings
MECHANICAL SPECIFICATION
Format
Weight
1670 mm × 1000 mm × 32 mm (including frame)
18.5 kg
EN 150 mm
1670 mm
980 mm
345 mm
951 mm
8.5 mm
24.5 mm
ELECTRICAL CHARACTERISTICS
POWER CLASS 280 285 290
MINIMUM PERFORMANCE AT STANDARD TEST CONDITIONS, STC1 (POWER TOLERANCE +5 W / −0 W)
Power at MPP 2 PMPP 280 285 290
Short Circuit Current* I SC 9.41 9.46 9.52
Minimum
100
RELATIVE EFFICIENCY
COMPARED TO NOMINAL POWER [%]
Q CELLS
first year. Thereafter max. 0.6 % degra-
EFFICIENCY
95
Industry standard for tiered warranties*
dation per year.
100
At least 92 % of nominal power up to
Relative
10 years.
RELATIVE
90
At least 83 % of nominal power up to 90
25 years.
85
TEMPERATURE COEFFICIENTS
Temperature Coefficient of ISC α [% / K] + 0.04 Temperature Coefficient of VOC β [% / K] − 0.29
NOTE: Installation instructions must be followed. See the installation and operating manual or contact our technical service department for further information on approved installation
and use of this product.