Prologue System Firmware Update: Update Procedure For Mac OS X Users
Prologue System Firmware Update: Update Procedure For Mac OS X Users
Prologue System Firmware Update: Update Procedure For Mac OS X Users
If the driver installed on your computer is older than the latest version, install the latest
version of the driver before starting the update.
1. Turn on the prologue while holding the [6] and [8] buttons. This will enter the version upgrade
mode.
1 2 3 4 5 6 7 8
7
1
2. Mount the “prologue_Updater_????_mac.dmg” by double-clicking on it, and run the “prologue
Updater ????” file in the disk image by double-clicking on it (???? is the version number).
The following window will appear. Push the [Update] button in the window to start the
process. (This is the image of the updater window when the prologue version is 1.01)
If the following message is shown, the system firmware is already up to date, and no change
is needed. In this case simply quit the KORG System Updater.
If an “Error message” is shown, confirm that the “prologue” is connected to the computer
properly, or that the “KORG USB-MIDI Driver 1.2.3 r14 or later” has already been installed.
2
3. During the updating process, the following window will appear. The whole process might take
several minutes to complete.
4. The following message will be shown when the update has successfully completed.
This will conclude the entire update procedure.
6. Turn on the prologue while holding button [8]. The current system, panel and voice versions
will be shown on the OLED display.
7. If a "-" appears next to the panel or voice version number, additional updates are required.
3
8. When a panel update is required, turn on the prologue while holding the [6], [EXIT] and
[SHIFT] buttons. This will enter the panel version upgrade mode.
1 2 3 4 5 6 7 8
During a panel version upgrade nothing will be displayed. Once the upgrade is
complete "Update complete" will be displayed.
In this case please wait until it completes and "Update complete" is shown on the OLED display,
then turn the power off, and on again.
9. When a voice update is required, turn on the prologue while holding the [5], [EXIT] and
[SHIFT] buttons. This will enter the voice version upgrade mode.
1 2 3 4 5 6 7 8
In this case please wait until it completes and "Update complete" is shown on the OLED
display, then turn the power off, and on again.