BX-B2 Semi-Automatic Bottle Blowing Machine: 1. Brief Introduction
BX-B2 Semi-Automatic Bottle Blowing Machine: 1. Brief Introduction
BX-B2 Semi-Automatic Bottle Blowing Machine: 1. Brief Introduction
1. Brief introduction
BX-B2 semi-automatic bottle blow molding machine with computer is suitable for
producing PET plastic containers and bottles from 100-1500ml. It is widely used to
produce the carbonated bottle, mineral water bottle,etc.
● Adopting double crank to adjust mould,heavy locking mould, stable and fast ,Adopt
infrared oven to heat the preform,the preform rotated and heated equally.
● The air system has been divided into two parts: pneumatic action part and bottle blow
part to meet the different requirements for the action and blow .It can provide sufficient
and steady high pressure for blowing large irregular shaped bottles.
● The machine is also equipped with muffler and oiling system to lubricate the mechanical
part of the machine.
● The machine can be operated in the step-by-step mode and the semi-auto mode.
● The machine is small with low investment,easy and safe to operate.
2. Picture of machine
1
3. Technical parameter
HP Air Compressor Air tank Air Filter air dryer Air Filter
2
5. Price list
The price is just for 2 months; the price for compressor, air dryer is just for 380v, if the
voltage is different, you should add 5% on the price above
6.Packing list:
7.Main parts
3
8.Free spare parts list:
No. Name Qty Unit
1 Stretch cylinder seal 2 set
2 Mould-close cylinder Seal 2 set
3 Joints 10 pcs
4 Lamp 15 pcs
5 Elbow 5 pcs
6 Air pipe 4 pcs
7 Clamping tool 1 set
8 Seal washer 10 pcs
9 Key 5 pcs
10 Blowing valve 1 pcs
11 TEE 1 pcs
12 Preform holder 3 pcs
13 Lamp bracket 3 pcs
9. Note
1.All the above prices are quoted on FOB Jabodetabek basis.
2.Original country :China
3.Delivery time:within 60 days.
4.Guarantee period:one year.