M20e 03140a120
M20e 03140a120
M20e 03140a120
M20E-03140A120
M2000 Standard
A Ordering information
B M20E-03140A120 1016429
C 1.) Concerns installation as a replacement part for previous type 2 device in machine: Regarding Machinery Directive
2006/42/EC, Article 1, Paragraph (2a) this type 2 device may only be used as a replacement part for identical PL d / SIL2
devices within the EU if the machine was put into circulation before 2015-05-10. Keep this note with your machine documen-
tation. If the machine is sold on, this note and the information it contains must be passed on to every subsequent buyer. 2.)
D
Concerns installation on new machines: Due to the amendment to the EN/IEC 61496-1 standard, this type 2 device may only
be installed on new machines up to PL c / SIL1 as of 2015-05-10.
E
F
Detailed technical data
Features
H
Scanning range 0 m ... 25 m, configurable
I Number of beams 3
J Response time
Synchronization
8 ms
Optical synchronisation
K Safety-related parameters
Type Type 2 (IEC 61496-1)
N Performance level
PFHD (mean probability of a dangerous fail-
PL c (EN ISO 13849)
6.6 x 10-9 (EN ISO 13849)
O
ure per hour)
TM (mission time) 20 years (EN ISO 13849)
Safe state in the event of a fault At least one OSSD is in the OFF state.
P 1)
Internal test. The test rate may not be exceeded if an external test is performed.
2)
Between two requirements on a safety-related response of the device, at least 100 internal or external tests must be carried out.
Q Functions
Functions Delivery status
R Beam coding
Configurable scanning range
✔
✔
Uncoded
S
T 2 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2018-11-26 12:32:21
Subject to change without notice
M20E-03140A120 | M2000 Standard
MULTIPLE LIGHT BEAM SAFETY DEVICES
Interfaces
System connection
Connection type Hirschmann plug M26, 7-pin
Permitted cable length ≤ 60 m 1)
1)
Depending on load, power supply and wire cross-section. The technical specifications must be observed.
2)
For additional information on Flexi Soft -> www.sick.com/Flexi_Soft.
Electrical data
Protection class III (IEC 61140)
1)
The external voltage supply must be capable of buffering brief mains voltage failures of 20 ms as specified in EN 60204-1. Suitable power supplies are available as
accessories from SICK.
2)
Applies to the voltage range between –30 V and +30 V.
Mechanical data
Housing cross-section 48 mm x 40 mm
Ambient data
Enclosure rating IP65 (EN 60529)
Classifications
ECl@ss 5.0 27272703
A ECl@ss 9.0
ETIM 5.0
27272703
EC001832
B
ETIM 6.0 EC001832
C
Dimensional drawing (Dimensions in mm (inch))
D 8
(0.31)
42.9
1.7
(0.07)
E
(1.69)
1 2
Ø 8.4
48 (1.89)
(0.33)
75 (2.95)
3
68 (2.68)
4
F
(1.75)
44.4
11.9
(0.47) 20
48 (0.79)
(1.89) 5 40
14 (1.57)
(0.55)
H
6
(0.24)
(0.04)
(0.14)
42.3
3.5
1
(1.67)
I
L4
L3
L5
L2
10.5
L1
(0.09)
2.2
L6
(0.41)
S1
J A1
22.4 25.6
(0.88) (1.01)
K
76.3 (3.00)
48 (1.89)
L
(1.38)
35
M
42.6
(0.89)
22.5
(1.68)
N
L1 L2 L3 L4 L5 L6
2 500 - 630 697 588 718 655 675
3 400 - 931 998 888 1,019 956 976
P 7
8
-
-
170
116
1,073
851
1,140
919
1,031
809
1,161
939
1,098
877
1,118
896
Q
8 - 170 1,231 1,298 1,189 1,319 1,256 1,275
9 - 170 1,388 1,455 1,346 1,476 1,413 1,433
R
S
T 4 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2018-11-26 12:32:21
Subject to change without notice
M20E-03140A120 | M2000 Standard
MULTIPLE LIGHT BEAM SAFETY DEVICES
Connection diagram
M2000 Standard with 7-pin system connection for UE48-2OS with restart interlock and external device monitoring
+24 V DC
1)
x y
k1 k2
s r x y
1 1
+24 V +24 V z
2 2
GND GND k1
3 3
Test OSSD1
4 4 k2
HRANGE OSSD2
z
5 5
Sel1 Sel1
6 6
Sel2 Sel2
Shield Shield
S1
M2000
S33 S11 S12 S31 A1 13 23 31
k1
UE48-2OS2D2
S34 S35 S21 S22 A2 14 24 32
k2
2)
K1 K2
0V
E119932/01/2017-06-12
3) PELV
Recommended accessories
Other models and accessories www.sick.com/M2000_Standard
4 pieces, Omega bracket, rotatable, fixable with only one screw, for mounting on the BEF-2SMMEAAL4 2044847
swivel mount
A Brief description
4 pieces, Mounting kit 2, rotatable, swivel mount, Polyamide PA6
Type
BEF-2SMMEAKU4
Part no.
2019659
B Alignment aids
C Laser alignment aid for various sensors, laser class 2 (IEC 60825). Do not look into
the beam!
AR60 1015741
D Adapter AR60 for housing cross-section 48 mm x 40 mm AR60 adapter, 48x40 4032461
E Adapter AR60 for housing cross-section 48 mm x 40 mm in PU3H device column AR60 adapter,
48x40, PU3H
4056731
H
I
J
K
L
M
N
O
P
Q
R
S
T 6 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2018-11-26 12:32:21
Subject to change without notice
SICK at a glance
Online data sheet
SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica-
tions. A unique range of products and services creates the perfect basis for controlling processes securely
and efficiently, protecting individuals from accidents and preventing damage to the environment.
We have extensive experience in a wide range of industries and understand their processes and require-
ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in
Europe, Asia and North America, system solutions are tested and optimized in accordance with customer
specifications. All this makes us a reliable supplier and development partner.
Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the ma-
chine life cycle and ensure safety and productivity.
Worldwide presence:
Contacts and other locations – www.sick.com