1.

SCENE FOR AN ANIMATION IN FLASH

AIM:

To create a scene for animation in flash

Algorithm:

STEP 1: go to start- macromedia- click on flash document

STEP 2: create a blue background in layer 1
STEP 3: Now insert a layer 2 and draw the clouds in this layer.
STEP 4: In order to create the clouds, go to tool bar and select pencil option, draw
the cloud in layer2
STEP 5: Fill the colour to the cloud, right click on it- choose convert to symbol
option- give the name as cloud
STEP 6: select the movie clip option and click ok.
STEP 7: Go to filter->click on the + symbol->select glow to apply glowing effect-
> select the colour to white
STEP 8: under glow and adjust the blur x/blur y values.
STEP 9: Give the appropriate blur effect to the cloud.
STEP 10: Go to frames, insert key frame on both the layer, create the motion
tween on 2nd layer and move the clouds
STEP 11: Finally go to control->click on test movies

OUTPUT:
 2. ANIMATED GREETING CARD IN FLASH.

AIM:

To create a animated greeting card in flash

Algorithm:

STEP 1: Go to start->Macro Media-click on Flash document.

STEP 2: Choose the textbox from the tool bar. Type the word as ‘WELCOME’
on layer1.
STEP 3: Select the complete word, increase its Font size and change the colour.
STEP 4: In the timeline window, select the 1st frame-Right click on it-choose
insert key frame. Now delete a last letter {E} and change the colour of the
remaining word.
STEP 5: Repeat the above procedure till you delete every word in ‘WELCOME’.
STEP 6: Now select all the key frames->Right click ->choose ‘Reverse key
frames’.
STEP 7: After reversing the frames copy the last frame and paste on its next. now
in the new frame Select all the complete word ‘welcome’ and change the
colour.
STEP 8: Finally, go to ‘control’-click on ‘test movie’ you will get the required
animation.

OUTPUT:
 3. FLASH MOVIE

AIM:

To create a flash movie using motion tweens.

Algorithm
STEP 1: Go to start- macromedia- click on flash document
STEP 2: select the line tool and draw the steps. colour it using the paint bucket tool
STEP 3: Select the circle from the tool bar and create a circle on the work area.
STEP 4: Now fill the colour to the circle using the paint bucket tool from the tool
bar.
STEP 5: Go to frames right click on the first frame and choose insert key frame.
slightly move the ball. Repeat the same procedure by adding new key frames
to show the ball change the shape of the ball slightly when it touches the
surface.
STEP 6: In order to change the shape use the free transform tool.
STEP 7:Go to control and click on test movies .you will observe the ball bouncing
on steps.

OUTPUT:
 4. SIMPLE SLIDE SHOW IN FLASH

AIM:

To create a silde show in flash.

Algorithm:
Step1: Go to start-> macromedia-> click on flash document
Step 2: Go to file -> Import and select the photos for slideshow
Step 3: Create the thumbnail menu
Step 4: Convert the menu to buttons
Step 5: Create a Photo display

OUTPUT:
 5. WEBPAGE WITH FLASH

AIM:

To create a website using flash.

Algorithm:

Step 1: Go to start-> macromedia-> click on flash document

Step 2: Go to file-> import->open external library-> select a background image
Click open.
Step 3: The selected image will be stored in your library. Open library and drag
the image on the work area by selecting the image.
Step 4: Resize the image to fit on the work area.
Step 5: Select the text tool from the tool bar.
Step 6: Type your name. Select the text and go to property to apply appropriate
font effects like font size, style and Colour etc.
Step 7: Go to control-> movie clip to see the final output.

OUTPUT:
 6. SUNFLOWER

Aim:

To draw a sunflower using photoshop

Algorithm :
STEP 1 : Click start->All Programs->Adobe Photoshop 7.0.
STEP 2 : Select File->New or press Ctrl + N to create a photoshop
STEP 3 : Type the name as sunflower, Select preset sizes as A4, Height and
width values in pixels, Mode as RGB Color and contents as
Transparent in New Layer dialogbox.
STEP 4 : Right clock on Pen tool and select Free form pen tool option
STEP 5 : Change the background colour.
STEP 6 : Draw petal and hold Alt button and drag petal make more copies.
STEP 7 :Draw circle using ellipse tool and fill with brown color.
STEP 8 :Press Ctrl + T to select each petal and change the direction according
with the circle.
STEP 9 :Draw steam using pencil tool and color it
STEP 10 :Sunflower is created

OUTPUT:
 7. PLANE FLYING

Aim :
To animate plane flying the clouds using photoshop.

Algorithm :
STEP 1 : Click start->All Programs->Adobe Photoshop 7.0.
STEP 2 : Select File->New or press Ctrl + N to create a photoshop
STEP 3 : Type the name as plane , Select preset sizes as A4, Height and width
values in pixels, Mode as RGB Color and contents as White in New
Layer dialog box.
STEP 4 : Switch to ImageReady screen
STEP 5 : Click and dragg the Cloud to image ready screen
STEP 6 : Click and dragg the Plane to image ready screen
STEP 7 : In the animation tab click Duplicate current frame and move the plane
STEP 8 :Repeat the Step 7 for 10 times
STEP 9 : Change the frame rate
STEP 10 :Click Play / Stop animation to animate the plane

OUTPUT
 8. MILITARY CLOTHE
Aim :
To create military clothe usingphotoshop.

Algorithm :
STEP 1 : Click start->All Programs->Adobe Photoshop 7.0.
STEP 2 : Select File->New or press Ctrl + N to create a photoshop
STEP 3 : Type the name as military clothe, Select preset sizes as A4, Height
and width values in pixels, Mode as RGB Color and contents as black
& white in New Layer dialog box.
STEP 4 : Set your first Colour to #777676 (gray) and se secondary to #FFFFFF
(white) and go to Filter >> Render >> Clouds
STEP 5 : Then go to Filter >> Artistic >> Sponge … and set the following
brush size is 2, definition is 13 and smoothness is 11 and click ok
STEP 6 : To change to green shade, Press Ctrl + U, check the “colorize” box
and drag the arrow to the green range of hues is 99, saturation is 12
and lightness is -37 and click ok
STEP 7 : Go to Image >> Adjustments>> Brightness / Contrast. Reduce
brightness to -17 and add contrast to +34 and click ok.
STEP 8 : Create a duplicate layer
STEP 9 : Select the upper layer and go to Filter >> Blur >> Gaussian Blur. Set
the radius to 2.7 Pixels and click ok
STEP 10 : Go to the layers panel and set the opacity of the blurred layer to 30%.
STEP 11 : Go to Filter >> Brush Strokes >> Crosshatch and set Stroke length is
9, sharpness is 6 and strength is 1 and click ok
STEP 12 : Repeat step 11 with the background layer to choose a different
sharpness and click ok
STEP 13 : Go to Filter >> Texture >>Texturazer and apply these settings for the
clothes canvas effect. Scaling is 100%, Relief is 2 and Light is
Bottom Left and click ok.
 9. REALISTIC STONE STRUCTURE
Aim :
To create realistic stone structure using photoshop.

Algorithm :
STEP 1 : Click start->All Programs->Adobe Photoshop 7.0.
STEP 2 : Select File->New or press Ctrl + N to create a Photoshop
STEP 3 : Type the name as realistic stone structure , Select preset sizes as
A4, Height and width values in pixels, Mode as RGB Color and
contents as black & white in New Layer dialog box.
STEP 4 : Set the Foreground color to white and the background color to black.
STEP 5 : Go to the toolbar at the top and click filter->render->clouds
STEP 6 : Open up the Channels window and Click on the “Create New Channel”
button and rename as stone texture
STEP 7 :Click filter->render->difference clouds. Repeat adding the difference
clouds filter about 2 more times, or until you have a variance you like
STEP 8 :Go to channel panel then Click off the new channel you just created, by
clicking off the eye.
STEP 9 :Click back on the layers tab, and press ctrl-j on the keyboard to duplicate
the Background layer.
STEP 10 :click filter->render->lighting effects to add lighting effect and do the
following changes
Light type as spotlight Intensity as 39 Focus as 69
Gloss as -97 Material as 35 Exposure as 0
Ambience as 7 Text channel as Stone texture Height as 100
STEP 11 : Click image->adjustments->hue/saturation and click on colorize then
do the following changes : Hue as +39Saturation as +29 Lightness as
-4 then click on ok
STEP 12 :Copy and paste the crack stone picture and press ctrl + t to fit the picture
STEP 13 :Click image->adjustments->levels, and drag the white slider and black
slider towards the middle then do the following changes :Input level as
75 1.00 151 and made click on ok.
STEP 14 :In the layer 1, change the blend mode to darken and opacity as 75%
STEP 15 :Click back to the stone texture layer, and click filter->noise->add noise.
Add noise as 6
STEP 16 :now add the text on picture

OUTPUT
 10. CONVERTING BLACK AND WHITE IMAGE INTO COLOR

AIM: convert a black and white to color photo using Photoshop

Algorithm;
STEP 1 : Click start->All Programs->Adobe Photoshop 7.0.
STEP 2 : Select File->New or press Ctrl + N to create a Photoshop
STEP 3 : Type thename as realistic stone structure , Select preset sizes as A4,
Height And width values in pixels, Mode as RGB Color and contents as
black & white In New Layer dialog box.
STEP 4 :Inset the black and white image
STEP 5 :Select the magnetic lasso tool and select the part to make coloring
STEP 6 :Go to image->adjustments->hue/saturation and set the values are
360,35,-26 and click on ok
STEP 7 :Select filter->noise->add noise and give 6 then click on ok
STEP 8 :Select the magnetic lasso tool and select the part to make coloring
STEP 9 :Goto image->adjustments->hue/saturation and set the values and click
on ok
STEP 10 :Repeat step 5 and step 6 to make the image in different color
STEP 11 :Now the black and white image is converted into coloured image

OUTPUT