1211K Br216ra MC55 MC160 en
1211K Br216ra MC55 MC160 en
1211K Br216ra MC55 MC160 en
BR216RA BR316RA
Features
Suitable for the control of hot and chilled water (0...+150°C) in HVAC systems control of heating plants.
Above 130°C valves should only be mounted in the horizontal position.
With stem heater suitable for water with antifreeze compounds down to –15°C
Tight shut-off in the closed position
Microprocessor controlled
Automatic self-calibration on start up
Connection type: Body with external thread acc. ISO 228/1 incl. connection parts of malleable cast iron with
cylindrical internal thread acc. ISO 7/1, union nuts and gaskets
24 VAC, 50/60 Hz
Power consumption: Pmax. 400 VA
PN 45 VA
Usable for media based on mineral oil basis (stem sealing made of FKM)
Technical silicon free version
BR216RA BR316RA
Drawing
BR216RA BR316RA
1)
Actuating time freely adjustable, presetting is marked with *
2)
only retified alternating voltage
3)
Invertible input and output signal
BR216RA BR316RA
Weight: 1.5 kg
Circuit diagram
01/03/2011 Data subject to change without notice
BR216RA BR316RA
Enclosure protection: IP 54
1)
Actuating time freely adjustable, presetting is marked with *
2)
only retified alternating voltage
3)
Invertible input and output signal
4)
Freely adjustable
BR216RA BR316RA
Circuit diagram
1)
Position switch unit and output signal 0(4)...20 mA not in combination
Technical data valve with actuator
HORA Helleforthstrasse 58 – 60 phone: +49 (0) 52 07 / 89 03 - 0
5/8 Holter Regelarmaturen GmbH & Co. KG 33758 Schloss Holte-Stukenbrock mail: fc@hora.de
Geschäftsbereich Flow Control Germany www.hora.de
Control valves with electric actuators up to 150°C PN 16 2.2.1.
Screwed connection with electric actuators
PN 16 MC55/24 MC55/230 MC55Y
Bronze MC100/24 MC100/230
MC161/24 MC161/230
BR216RA BR316RA
DN 15 20 25 32 40 50
4 1.6 6.3 10 16 25 40
kvs-value m³/h 2.5 1.25 5 8 12.5 20 31.5
0.63
Stroke mm 12 14
1)
105 125
MC55/24 Actuating time s
MC55/230 60* 70*
MC55Y
Closing pressure kPa 1500 1500 1250 750 450 250 150
145 170
1)
105* 125*
MC100/24 Actuating time s
45 55
MC100/230
20 30
Closing pressure kPa 1600 1600 1600 1500 900 550 350
1)
95
MC161/24 Actuating time s
55*
MC161/230
Closing pressure kPa 1500 950 600
Drawing
01/03/2011 Data subject to change without notice
BR216RA BR316RA
Installation instruction:
Valve trim could be damaged by dirt in the pipe system. Therefore we recommend the installation of strainers.
BR216RA BR316RA
Dimension
DN 15 20 25 32 40 50
G Rp ½ Rp ¾ Rp 1 Rp 1 ¼ Rp 1 ½ Rp 2
L mm 62 75 80 120 130 150
L1 mm 114 127 138 184 198 222
B mm 40 41 45 55 60 65
B1 mm 66 67 74 89 94 101
B2 mm 48 53 57 68 73 78
G2 G1A G1¼A G1½A G2A G2¼A G2¾A
SW mm 37 48 53 68 73 88
T mm 13 15 17 19 19 24
MC55 24 VAC/230 VAC mm 265 268 271 280 283 283
24 VAC mm 338 341 344 353 358 363
MC100
H 230 VAC mm 363 366 369 378 383 388
24 VAC mm 420 423 423
MC161
230 VAC mm 445 448 448
MC55 kg 2.4 2.9 3.2 4.9 5.5 7.1
m MC100 kg 3.4 3.9 4.2 5.9 6.5 8.1
MC161 kg 6.6 7.2 8.8
01/03/2011 Data subject to change without notice