Boq 45775

Validate Print Help Item Rate BoQ
Tender Inviting Authority: MANAGING DIRECTOR HPMC NIGAM VIHAR SHIMLA 2

Name of Work:Civil works for up–gradation, expansion and strengthening of existing Post-Harvest infrastructure for Jarol Tikkar, District. Shimla (HP)
Contract No:
Name of the
Bidder/
Bidding Firm /
Company :
PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is lia
NUMBER # TEXT # allowed to enter the Bidder
NUMBER # Name
TEXT and
# Values only ) #
NUMBER
Sl. Item Description Quantity Units BASIC RATE In

No. Figures To be
entered by the
Bidder in
Rs. P
1 2 4 5 13
1 PACKHOUSE, CA STORES & OFFICE
2 Excavation in earth work and filling in 15 cm. layers in foundation and 1454.690 CUM
plinths including ramming, watering and consolidating upto a lead of 20
metres and lift upto a 1.5 metres.
3 Filling of available earth 1309.220 CUM
4 Filling of carted earth. 145.570 CUM
5 Providing and laying cement concrete 1:4:8 (1 cement:4 sand:8 graded 194.290 CUM
stone aggregate 40mm nominal size) and curing complete excluding
cost of form work in: Foundation and plinth:
6 Sand Filling in plinth excluding supply of necessary quantity of sand from 217.110 CUM
a distance not exceeding 8 km (5 miles) from the site of work & including
watering,ramming , dressing etc rate to include cost of all
materisls,labour and T&P etc. required for proper completion of the
work.
7 Providing and injecting chemical emulsion for preconstructional 457.000 SQM

antitermite treatment and creating a chemical barrier under and
alround the column pits wall trenches basement excavation top
surface if plinth filling junction of wall and floor, along the the external
perimeter of binding expansion joints, surrounding of pipes and
conduits etc, complete (plinth area of the building at ground floor only
shall be measured as per I.S.6313 ( Part II 1981 ) Alderine emulsifiable
concentrate or any other approved material such as Heptrachlor or
chordancewill be used. The rate of application of chemical emulsion
shallbe as follows : (1 Treatment for masonary & foundation 5 liters pe r/
100 Sqm. (2) Back fill in immediate contact with foundation 7.5 liters /
100 Sqm. (3) Treatment of top surface of plinth filling 5 liters / 100 Sqm.
(4)Treatment junction of wall and the floor 7.5 liters / 100 Sqm.
(5)Treatment of soil along external perimeter of building 7.5liters / 10
Sqm.(6) Treatment of soil under apron along external perimter 5 liters /
100 Sqm.
8 Providing and laying in position machine batched and machine mixed 827.690 CUM
design mix M-25 grade cement concrete for reinforced cement concrete
work, using cement content as per approved design mix, including
pumping of concrete to site of laying but excluding the cost of centering,
shuttering, finishing and reinforcement, including admixtures in
recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability
as per direction of Project Manager. All works upto plinth level, including
the equipment foundation.
9 Providing and laying in position machine batched and machine mixed
as per direction of Project Manager.All All works above plinth level upto
floor V level (COLUMN)
10 Ground Floor 134.570 CUM

11 First Floor 10.810 CUM
floor V level (LINTEL BAND)

as per direction of Project Manager. All All works above plinth level upto
floor V level (SUNSHADE)

floor V level (BEAM)

floor V level (SLAB)

24 Providing mild steel / Tor steel reinforcement Fe500 for RCC work
including bending , binding and placing in position complete upto floor
two level.
25 Ground Floor 1583.640 QTL.
26 First Floor 78.510 QTL.
27 Brick work with common burnt clay F.P.S. (non modular) bricks of class 41.810 CUM
designation 7.5 (First Class Brick) in foundation and plinth in:Cement
mortar 1:6 (1 cement : 6 coarse sand)
28 Providing and laying damp proof course 38 mm thick with cement 104.520 SQM
concrete 1:2:4 ( 1 cement:2sand:4 stone agreegate 12.5 mm nominal
size) and curing complete.
29 Applying a coat of residual petroleum bitumen of grade of VG-10 of 104.520 SQM
approved quality using 1.7 kg per square metre on damp proof course
after cleaning the surface with brushes and finally with a piece of cloth
lightly soaked in kerosene oil.
30 Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 (First Class Brick) in superstructure above plinth level up
to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement :
6 coarse sand)
33 Half brick masonry in common burnt clay building bricks in Cement
Mortar 1:4
(1 cement : 4 sand) First Class Bricks
34 Ground Floor 145.990 SQM
35 First Floor 77.680 SQM
36 Providing and fixing flush door shutters decorative type core of block
board construction with frames of first class hard wood and well matched
first class indian teak plyveneering with vertical grains or cross bends
and face vencering on both faces of shutter 35mm thick including black
enamelled M.S. butt hinges

39 Mild Steel or iron work of small size and section such as hoding down
bolts,hold fast,tie rods,gratings etc.(when not included in an over all
rates) wrought to required form,including of supply of steel,bolts nuts
and wastage etc and there fixing required for proper completion of the
work. (fabrication of door frame - Angle iron door chaukhat including
cost of hinges) 40x40x5mm -
40 Ground Floor 191.640 KG

41 First Floor 119.010 KG
work.(fabrication of grill & stair case railing)

work.(fabrication of Z section) openable

48 15mm cement plaster in single coat on fair side of brick/concrete/stone
walls for interior plastering upto floor two level including arrises,internal
rounded angles,chamfers and/or rounded angles not exceeding 80mm in
girth and finished even and smooth ( Cement Mortar 1:6)

51 15mm Cement plaster in single coat on the rough side of brick/
concrete/stone walls for interior plastering upto floor two level including
arrises,internal rounded angles,chamfers and/or rounded angles not
exceeding 80mm in girth and finished even and smooth.(1Cement:6
Sand)
54 White glazed floor tiles 6 mm thick in 12 mm thick cement mortar 1:3 (1
cement :3 sand) and jointed with cement slurry.
57 White glazed wall tiles 6 mm thick in 12 mm thick cement mortar 1:3 (1
cement :3 sand) and jointed with grey cement slurry.
60 Kota stone flooring 20 mm (average) thick base of cement mortor 1:4 (1
cement :4 sand) laid over and jointed with grey cement slurry mixed with
pigment to match the shade of the slab. including rubbing and polishing
complete.
63 Kota stone 20 mm thick in risers of steps, skirting, dado and pillars laid
on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand)
and jointed with grey cement slurry mixed with pigment to match the
shade of the slabs, including rubbing and polishing complete.

66 Providing and fixing 10mm thick anti skid water proof stain and impect
resistent heavy duty vetrified tiles 600x600mmx10mm manufactured of
approved shade and colour in flooring, treads of steps and landings laid
over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with
cement slurry mixed with pigment to match the shade of tiles as required
complete. (Flooring)

69 Providing and fixing 10mm thick anti skid water proof stain and impect
resistent heavy duty vetrified tiles 600x600mmx10mm manufactured of
approved shade and colour in flooring, treads of steps and landings laid
over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with
cement slurry mixed with pigment to match the shade of tiles as required
complete. (skirting)

72 Apply priming coat and enamel paint (two coats) over new steel and
other metal surface after and including preparing the surface throughly
cleaning oil grease dirt and other foreign matter and scoured with wire
brushes,fine steel/wood scrappers sand preparing and knotting including
cost of all materials,labour and T&P etc. required for proper completion
of the work.

75 Painting two coats (excluding priming coat on new steel and other metal
surfaces with enamel paint brushing to give an even shade including
cleaning the surface of all dirt,dust and other external matters

78 Polishing two coats with malamine polish of required shade on new
wood and wood based surfaces to give an even surface including
cleaning the surface of all dirt, dust and sand papered smooth and
including a coat of wood filler.
81 Applying Birla white wall care putty over plaster surface after thoroughly
brushing the surface free from mortar drops, dust, loose materials and
other foreign matters sand papered smooth to give final matter finish to
the surface complete.
84 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone
additives of required shade:New work (Two or more coats applied @
1.43 ltr/10 sqm over and including priming coat of exterior primer applied
@ 2.20 kg/10 sqm)
87 Distempering with oil bound washable distemper of approved brand and
manufacture to give an even shade New work (two or more coats) over
and including water thinnable priming coat with cement primer

90 Providing & fixing glass panes with putty and glazing clips in steel doors,
windows, clerestory windows, all complete with 5mm thik
93 Providing Stainless steel Sliding Bolts 16 mm dia with nutx & 250 mm
long
94 Ground Floor 2.000 NOS.
95 First Floor 8.000 NOS.
96 Providing Stainless steel Tower Bolt with 10 mm dia and screw 250
mm long
99 Providing Stainless steel Door Handles with screws 125 mm long

102 Providing and laying water proofing treatment in sunken portion of WCs, 7.120 SQM
bathroom etc., by applying cement slurry mixed with water proofing
cement compound consisting of applying : a) First layer of slurry of
cement @ 0.488 kg/sqm mixed with water proofing cement compound
@ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. b)
Second layer of slurry of cement @ 0.242 kg/sqm mixed with water
proofing cement compound @ 0.126 kg/sqm. This layer will be allowed
to air cure for 4 hours followed with water curing for 48 hours. The rate
includes preparation of surface, treatment and sealing of all joints,
corners, junctions of pipes and masonry with polymer mixed slurry on
First Floor
103 Providing and fixing stainless steel ( Grade 304) railing made of Hollow 93.600 KG
tubes, channels, plates etc., including welding, grinding, buffing,
polishing and making curvature (wherever required) and fitting the same
with necessary stainless steel nuts and bolts complete, i/c fixing the
railing with necessary accessories & stainless steel dash fasteners ,
stainlesssteel bolts etc., of required size, on the top of the floor or the
side of waist slab with suitable arrangement as per approval of Project
Manager, (for payment purpose only weight of stainless steel members
shall be considered excluding fixing accessories such as nuts, bolts,
fasteners etc.) on Ground Floor
104 Chequered terrazo tiles 22 mm thick with graded marble chips of size up 12.000 SQM
to 6 mm in floors, jointed with neat cement slurry mixed with pigment to
match the shade of the tiles, including rubbing and polishing complete,
on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand)
Medium shade pigment using 50% white cement, 50% ordinary cement
(Ramps).
105 Supplying and fixing rolling shutters of approved make, made of required 63.000 SQM
size M.S. laths, interlocked together through their entire length and
jointed together at the end by end locks, mounted on specially designed
pipe shaft with brackets, side guides and arrangements for inside and
outside locking with push and pull operation complete, including the cost
of providing and fixing necessary 27.5 cm long wire springs
manufactured from high tensile steel wire of adequate strength
conforming to IS: 4454 - part 1 and M.S. top cover of required thickness
for rolling shutters.
106 Providing and fixing ball bearing for rolling shutters. 12.000 Nos.
107 Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth
level 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone
aggregate 20 mm nominal size) (filling hold fast)
110 Providing and laying cement concrete Tremix flooring 150mm thick with
cement concrete mix-25 and sprinkled with floor hardener of BASF
Master top 100e or fosroc nito floor hard top standard @5kg/Sqm over
vacuum dried Concrete, Mix with steel fibre dramix gallud-non balling
80/60 or equivalent @15kg/m3 of concrete and target 3 micro multi
dimension fibrillated multifilament virgin PP fibre mix. @0.90kg/cum with
shear dowel load transfer 16 mm dia., 400mm c/c in both direction X & Y
and complete in all respects. The top of floor shall be covered with
polythene immediately for one week. The slope of final floor shall be
maintained as 1:500, complete job in all respects as per the direction of
Project Manager.

113 Providing and fixing double scaffolding system (cup lock type) on the 2041.000 SQM
exterior side, up to seven story height made with 40 mm dia M.S. tube
1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock
system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S.
staircase system in the scaffolding for working platform etc. and
maintaining it in a serviceable condition for the required duration as
approved and removing it there after .The scaffolding system shall be
stiffened with bracings, runners, connection with the building etc
wherever required for inspection of work at required locations with
essential safety features for the workmen etc. complete as per directions
and approval of Project Manager .The elevational area of the scaffolding
shall be measured for payment purpose .The payment will be made
once irrespective of duration of scaffolding.
114 Providing form work with steel plates 3.15 mm thick welded with angle
iron frame 30x30x5 mm so as to give a fair finish including centring
shuttering strutting and proping etc. with wooden battens and
ballies,height of proping and centring below supporting floor to ceiling
not exceeding 4 mtrs.and removal of the same for in situ-reinforced
concrete and plain concrete work in :
115 Foundation , footing basis of columns etc. and mass concrete. 812.440 SQM
116 Columns, pillars, posts and struts. 822.330 SQM
117 Beams, cantilever, girders and lintels.Sides and soffits of beams, beam 4822.270 SQM
haunching,cantilevers,bressumers and lintels 1 mtrs. In depth in all
height.
118 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1
cement : 3 coarse sand), finished with a floating coat of neat cement. 18
mm thick
121 Providing and applying 2 or more coats of tapecrete water proofing 250.000 SQM
compound for waterproofing treatment to the RCC structures like
retaining walls of the basement, water tanks, roof slabs, podiums,
reservior, sewage & water treatment plant, tunnels / subway and bridge
deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral
crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts
integral crystalline slurry : 1 part water) for horizontal surfaces and
applying the same from negative (internal) side with the help of synthetic
fiber brush. The material shall meet the requirements as specified in
ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than
90% compared with control concrete as per DIN 1048 and resistant to
16 bar hydrostatic pressure on negative side. The crystalline slurry shall
be capable of self-healing of cracks up to a width of 0.50mm. The work
shall be carried out all complete as per specification and the direction of
the Project Manager. The product performance shall carry guarantee for
10 years against any leakage.For horizontal surface one coat @1.10 kg
per sqm.For vertical surface two coats @ 0.70 kg per sqm
122 Structural steel work riveted, bolted or welded in built up sections, 1350.000 KG
trusses and framed work, including cutting, hoisting, fixing in position
and applying a priming coat of approved steel primer all complete.
123 RETAINING WALL

metres and lift upto 1.5 metres.
as per direction of Project Manager.All works upto plinth level
as per direction of Project Manager.All works above plinth level upto
floor V level (COLUMN,WALLS)
128 Providing mild steel / Tor steel reinforcement Fe500 for RCC work 304.290 QTL
two level.
ballies,height of proping and centring below supporting floor to ceiling
not exceeding 4 mtrs.and removal of the same for in situ-reinforced
concrete and plain concrete work in :
132 C. C. ROAD
134 Providing and laying cement concrete 1:4:8 ( 1 cement:4 sand:8 graded 68.500 CUM
stone agreegate 40 mm nominal size) and curing complete excluding
cost of form work in :Foundation and plinth:
135 Providing and laying at or near ground level factory made kerb stone of 6.440 CUM
M-25 grade cement concrete in position to the required line, level and
curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand),
including making joints with or without grooves (thickness of joints
except at sharp curve shall not to more than 5mm), including
making drainage opening wherever required complete and paint etc. as
per direction of Project Manager (length of finished kerb edging shall be
measured for payment). (Precast C.C. kerb stone shall be approved by
Project Manager).
136 Providing & laying Cement Concrete 1:2:4 (1 cement:2 coarse sand: 4 85.000 CUM
graded stone ballast 20mm nominal size) including supply of all material
labour and T&P etc. required for proper completion of the work and
curing complete also including cost of formwork in foundation & floor
137 Providing and laying in position bitumen hot sealing compound for 40.000 RM
expansion joints etc. Using grade 'A' sealing compound.
138 Providing miled steel / Tor steel reinforcement Fe500 for RCC work 33.360 Qtl.
two level.
139 Coloured inter locking C.C. paver Block (60 mm thick, M-35) 1310.000 SQM
140 TOILET BLOCK
141 Tata Steel EzyNest 9ft * 4 ft modular toilets (3 toilet in row), Unit Size 1220 mm 3.000 Nos
x 2745 mm x 2050 mm. WALL:Zero spangled cold rolled 120 GSM Galvanised
(Galvano) powder coated 40 mm thick EPS panels ( EPS Density - 16 KG /m3,
EPS thickness - 38 mm, Steel sheet thickness - 0.6 mm, 275 MPA), bottom 3
side panel SS304 grade layer up to 10 /12 inchs, CEILING: Zero spangled cold
rolled 120 GSM Galvanised (Galvano) powder coated 40 - 70 mm thick taper
roof EPS panels ( EPS Density - 16 KG /m3,EPS thickness - 38 mm, Steel
sheet thickness - 0.6 mm, 275 MPA), FLOOR: Anti Skid tile finish floor inside
toilet only, DOOR: Zero spangled cold rolled 120 GSM Galvanised (Galvano)
powder coated with necessary stiffeners and Aluminium accesories (2 Al
handles, 1 Al tower bolt, 1 Al L-drop). Door Size - 1790 mm * 655mm (Steel
sheet thickness - 0.6 mm, 275 MPA), FASTNERS: Galvanised fastners, 2 Al
handles, DOOR ACCESSORIES :1 Al tower bolt, 1 Al L-drop, VENTILATION: 3
side Zero spangled cold rolled 120 GSM Galvanised (Galvano) powder coated
louvre panel for cross ventilation with EPS insulated panels. Provision for
natural light above door, IWC: Provision of Indian Pan orissa pattern with
antiskid tiled florring, PLUMBING: 1 PTMT Tap in each compartment, 200 Litre
water Tank with tank frame, required pipes & necessary fitments, TAP: 1 PTMT
Tap for each unit and 1 PTMT tap for each wash basin, WATER SUPPLY
CONNECTIONS: PVC Pipe connection with all toilets interconnected and
single inlet water supply point for Toilet, WASTE MANAGEMENT: Twin Leech
pit with Insepction chamber : 1000mm dia and 1200 mm deep, made out of 40-
50mm thick concrete rings/brick work with sufficient holes for the Leech pit to
function effectively. 3" Thick RCC slab as top cover, made of 1:4:8 C:S:A. MS
rings to be provided for lifting of slab.
1 Inspection Chamber: Soil Waste inspection chambers in 4 1/2 " brick work
with inside dimension as 375mm x 375mm x 300mm depth.The same will be
covered with a RCC top cover with MS hook. RCC cover will be 3" thick in 1:4:8
C:S:A. Inside surface of chamber will be finished with 10mm thick cement
plaster in 1:4. The base will be 3" thick PCC in 1:5:10 Required Pipe
connections between Toilet structure, IC and Leech Pit. CIVIL FOUNDATION
DETAIL: Foundation • Brick Foundation of size 200mmX200mm with depth of
200mm from ground level for anchor/column locations. Pocket to be filled with
PCC of 1:2:4 ratio after grouting of steel element of structure. • Plinth of height
300mm to be done with 5" first class brickwork using 1:5 mortar in periphery for
the platform of size 1.125mx1.5m • Filling and ramming of 150mm using silver
sand/good-earth • Single brick flat soling of 75mm height on filled-up area •
142 FIRE TANK
as per direction of EProject Manager (Foundation)
floor V level (COLUMN)
floor V level (beam) on ground floor
floor V level (Slab) on ground floor
floor V level (Wall)
150 Providing mild steel / Tor steel Fe500 reinforcement for RCC work 157.490 QTL.
two level.
ballies,height of proping and centring below supporing floor to ceiling not
exceeding 4 mtrs.and removal of the same for in situ-reinforced concrete
and plain concrete work in :
154 Beam 41.520 SQM
155 Beams, cantilever, girders and lintels.Sides and soffits of beams, beam 175.720 SQM
haunching,cantilevers,bressumers and lintels 1 mtrs. In depth in all
height.
156 40 mmthick cement concrete flooring with 25 mm under layer of cement 176.800 SQM
concrete 1:3:6 (1cement :3 sand :6 stone aggegate of size 12.5 mm and
below) and 15 mm weaking layer in cement concrete 1:2 to 3 (1
cement : 2 to 3 stone aggregate of size 4.75 mm and below) laid integral
with base course and finished with a floating coat of neat cement.
157 Providing and applying 2 or more coats of tapecrete water proofing

compound for waterproofing treatment to the RCC structures like
retaining walls of the basement, water tanks, roof slabs, podiums,
reservior, sewage & water treatment plant, tunnels / subway and bridge
deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral
crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts
integral crystalline slurry : 1 part water) for horizontal surfaces and
applying the same from negative (internal) side with the help of synthetic
fiber brush. The material shall meet the requirements as specified in
ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than
90% compared with control concrete as per DIN 1048 and resistant to
16 bar hydrostatic pressure on negative side. The crystalline slurry shall
be capable of self-healing of cracks up to a width of 0.50mm. The work
shall be carried out all complete as per specification and the direction of
the Project Manager. The product performance shall carry guarantee for
10 years against any leakage.
158 For horizontal surface one coat @1.10 kg per sqm. 231.960 SQM
159 For vertical surface two coats @ 0.70 kg per sqm 328.060 SQM
160 Rectangular shape 500x500 mm precast R.C.C. manhole cover with 3.000 Nos.
frame - M.D. - 10
161 INTERNAL/ EXTERNAL LIGHTING WORKS
162 200 PVC INSULATED HEAT RESISTANT FLAME RETARDANT AND 201.000 Point
LOW SMOKE (HRFRLS) COPPER CONDUCTOR WIRING IN PVC
CONDUIT Wiring for light point / fan point / exhaust fan / call bell point
with 1.5sqmm. PVC insulated heat resistant flame retardant (HRFR) and
low smoke single core (flexible) copper conductor cable in
surface/recessed PVC conduit with modular switch, modular plates,
suitable G.I. box and earthing the light point with 1.5 Sq.mm.
HRFRLS/PVC insulated single core copper conductor cable as required:
Group C
163 Wiring for twin control light point with 1.5 Sqmm FRLS PVC insulated 17.000 Point
copper conductor single core cable in surface / recessed steel conduit, 2
way modular switch, modular plate, suitable GI box and earthing the
point with 1.5 Sqmm FRLSPVC insulated copper conductor single core
cable etc as required.
164 Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant 250.000 R/M
flame retardant (HRFR) and low smoke single core (flexible) copper
conductor cable in surface/recessed PVC conduit along with 1No. 1.5
Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for
earthing as required.
165 Wiring for power plug with 2x4 Sq. mm PVC insulated heat resistant 242.000 R/M
conductor cable in surface/recessed PVC Conduit along with 1 No.4
166 Wiring for power plug with 4x4 Sq. mm PVC insulated heat resistant 137.000 R/M
conductor cable in surface/recessed PVC Conduit along with 2 No.4
167 Wiring for circuit/sub-main with following size pve insulated heat
resistant flame retardant (HRFR) and low smoke single core (flexible)
copper conductor cable in surface / reccessed PVC conduit along with 1
No. HRFRLS/PVC insulated single core copper conductor cable of same
Size for earthing as
168 2x1.5 Sq mm (For Light CKTs / Secondary Light Point) 1175.000 R/M
169 2x2.5 Sq mm (For Chamber Light) 650.000 R/M
170 Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat 159.000 R/M
resistant flame retardant (HRFR) and low smoke sirgle core (flexible)
copper conductor cable in surface / recessed PVC conduit along with 2
No.10 Sq.mm. (4x10 + 2x10) HRFRLS/PVC insulated single core copper
171 Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat 132.000 R/M
resistant flame retardant (HRFR) and low smoke sirgle core (flexible)
copper conductor cable in surface / recessed PVC conduit along with 2
No.16 Sq.mm. (4x16 + 2x16) HRFRLS/PVC insulated single core copper
172 600 SUPPLYING AND FIXING PVC CONDUITS: Supplying and fixing of 291.000 R/M
50 mm dia PVC conduit along with the accessories in surface / recess
including cutting the wall and main good the same in case of recessed
conduit as required :
173 800 SUPPLYING AND FIXING METAL BOXES: S/F Metal boxes
following sizes (nominal size) on surface or recessed suitable for fixing
phenolic laminated sheet cover in front including painting etc. as as
required:
174 200mm x 150mm x 75mm deep 10.000 each
175 250mm x 300mm x 100mm deep 6.000 each
176 900 ERECTION OR FITINGS AND ACCESSORIES: Supplying and 47.000 each
fixing GI Modular box of (100mmx75mmx50mm) size with modular plate
and cover in recess including providing and fixing pin 5/6 amps modular
socket, outlet and 5/6 amps modular switch connections etc. as
required.
177 Supplying and fixing G.I. Modular box of (100mmx75mmx50mm) size 13.000 each
with modular plate and cover In recess including providing and fixing 6
pin 15/16 amps modular socket outlet and 15/16 amps modular switch
connections etc. as required.
178 Supplying and fixing ceiling rose on the existing junction box / wooden 1.000 each
block including connections etc. as required.
179 Supplying and fixing bakelite batten/angle holder including connections 1.000 each
etc as required:
180 Supplying and fixing GI Modular box of (75mmx75mmx50mm) size with 51.000 each
modular plate and cover in recess including providing and fixing pin 5/6
amps modular switch, connections etc. as required.
181 Supplying and fixing GI Modular box of (100mmx75mmx50mm) size with 6.000 each
modular plate and cover in recess including providing and fixing pin 5/6
amps modular 2way switch, connections etc. as required.
182 Supplying and fixing of following sizes of medium class PVC conduit
along with accessories in surface/recess including cutting the wall and
making good the same in case of recessed conduit as required.
183 25 mm 500.000 Meter

184 32 mm 50.000 Meter
185 40 mm 50.000 Meter
186 1000 METAL BOARDS FOR SWITCH GEAR MOUNTINGS: Supplying 2.200 SQM of face
and erection of following depth, sheet metal cubical pedestal of suitable'
dimensions 'with plus-minus 5 cm variation, made from 1.6 mm thick.
MS sheet duly fabricated in a segregated manner for housing of switch
fuse units, by welding each compartment on five sides & front side
hinged, complete with locking arrangement with sufficient. No vertical
and horizontal intermediate switchgear housing compartments. The
cubical pedestal shall have cable entry box at one or two sides with
epoxy powder coated approved paint and bonding to the existing earth
etc. The same shall be erected in the 1:2:4 cement concrete plat-form of
suitable dimensions 15cm high from ground level and 45cm thick. The
cubical pedestal shall be 15cm from the top of cement concerete
platform: 300 mm deep (nominal)
187 1300 SUPPLYING AND FIXING OF BUS BARS IN THE EXISTING 2.200 R/M
CHAMBER / CUBICAL Copper Busbar - Supplying and fixing copper
strip bus-bars suitable for 200A 415V capacity 4No. Each of cross-
sectional area (25.4mm x 4.75mm), in each existing enclosure or cubical
with all accessories including
188 1600 MOULDED CASE CIRCUIT BREAKERS AND AIR CIRCUIT
BREAKERS: Providing and fixing following rating and breaking capacity
MCCB in the existing cubical panel board including drilling holes in the
cubical panel making connections, etc. as required
189 63A / 40A - 16KA 6.000 each
190 160A - 16KA 1.000 each
191 1700 MINIATURE CIRCUIT BREAKES / RESIDUAL CURRENT
CIRCUIT BREAKERS: Supplying and erection of 6 amps to 32 amps
rating, 10KA breaking capacity, 240V, 'C' curves, miniature circuit
breaker of following poles in the existing MCB DB complete with
connections
192 Single Pole Cat-A 42.000 each

193 Double Pole Cat-A (63A) 10.000 each
194 Supplying and fixing 20 amps, 240 volts, SPN moulded type, socket 1.000 each
outlet, with 2 pole and earth, enclosed plug top along with 20 amps "C"
curve, SP, MCB, in moulded enclosure, on surface or in recess, with
chained metal cover for the socket out let and complete with
connections, testing and commissioning etc. as required.
195 Supplying and erection of 40/50/63 amps rating, 10KA breaking capacity, 13.000 each
240V, 'C' curves, miniature circuit breaker of following poles in the
existing MCB DB complete with connections: Triple Pole & Neutral Cat-A
(63A)
196 Supply and fixing 30A 415V TPN industrial socket outlet, 4-pole and 3.000 each
earth, metal enclosed plug top, sheet steel enclosure, suitable to
accommodate a 30A TPN-MCB on surface or in reecss, with chained
metal cover for the socket outlet, complete with connections, testing and
commissioning etc. as required.
197 1800 MCB DISTRIBUTION BOARDS: Supplying and fixing of following 1.000 each
way single pole and neutral sheet steel MCB dislribution board 240V on
surface / recess complete with tinned copper bus. bar. wire-set, neutral
link. earth bar, din-bar, detachable gland plate, cable. identification labels
interconnections phosphatized and powder painted including earthing as
required - Double Door-6 Way
198 Supplying and fixing of following way triple pole and neutral. sheet steel 3.000 each
MCB dislribution board. 415V on surface / recess. with provision for 4
pole MCB/lsolator/RCCG/RCBO as incomer and sr MCBs as outgoing,
complete with tinned copper bus. bar. wire-set, neutral link. earth bar,
din-bar, detachable gland plate, cable. identification labels
interconnections phosphatized and powder - Double Door-4 Way (8+12)
horizontal
199 1900 EARTHING AND LOOP EARTHING

200 GI Electrode Earthing with 80 mm dia and 3 meter length, The electrode 12.000 set
should be hot-dip galvanized with 120-150 micron. The GI Electrode
shall be pre-filled with Cristaline Conductive Material (CCM) . The GI
electrode shall be surrounded with 50 kg BackFill compound to provide
maximum contact between the electrode and Back Fill Compound.
Backfill compound should be eco-friendly and having RoHs
certification .GI Electrode Earthing should be maintenance free and
dose not required regular manual addition of water. GI Electrode Shall
be tested from CPRI.The earting pit should be cover with FRP cover, of
300 x 300 mm.
201 Supplying and fixing 25mm x 5mm copper strip on surface or in recess 30.000 meter
for earthing connection etc. as required
202 Supplying and fixing 25mm x 5mm GI strip on surface or in recess for 255.000 meter
earthing connection etc. as required
203 2000 LIGHTENING CONDUCTOR: Providing and fixing of Lightning 6.000 each
conductor finial, made of 25mm dia 300mm long GI tube, having single
prong at top, with 85mm dia 6mm thick GI base plate including hole etc.
complete as required.
204 Riveting, sweating and soldering of copper / GI tape with another copper 15.000 each
/ GI tape base of the finial or any other metallic object as required.
205 Supply and fixing GI tap 20mmx3mm thick on parapet or surface of wall 90.000 meter
for lightening conductor as required (for vertical run)
206 Supply and fixing GI tap 20mmx3mm thick on parapet or surface of wall 375.000 meter
for lightening conductor as required (for horizontal run)
207 Supplying and laying of GI tape 32mmx6mm thick from earth electrode 34.000 meter
to directly in ground as required.
208 2100 UNCLASSIFIED ITEMS: Providing and fixinng MV danger notice 4.000 Each
plate of 200mm x 150mm made of mild steel at least 2mm thick and
vitreous enameled white on both sides and with inscription in signal red
color on front side as required
209 2200 ALUMINIUM CONDUCTOR PVC INSULATED ELECTRIC
ARMOURED CABLES: Providing, laying and fixing of one No. aluminium
conductor, PVC insulated and PVC sheathed, armoured / XLPE power
cable, working voltage 1100V grade on surface and ground of the
required size.
210 Armoured Cable 6sqmm (twin core) 300.000 R/M

211 Armoured Cable 70sqmm (3.5 core) 25.000 R/M
212 Cu cable Armoured Cable 35 sqmm (3.5 core) 131.000 R/M
213 2500 PROVIDING AND INSTALLATION OF CEILING / EXHAUST 6.000 each
FANS: Providing and installation of exhaust fan of following sizes in the
existing opening, including' making the hole to suit the size of the above
fan. making good the damages. connections. Testing and
commisslonina etc as reauired: Exhaust fan, heavy duty 380mm sweep
including suitable Louver
214 2700 SUPPLYING AND FIXING OF WALL BRACKETS / CEILING 5.000 each
FITTINGS: Supplying and fixing of bulk head fitting of all sizes and
shapes, containing one No. thread type CFL lamp holder(s), complete
with all accessories but excluding CFL lamp including making
connections. testing etc as required - Bulk Head Fitting, CFL type
(Category - A)
215 2800 Supply and erection of Poles: Supplying and erection of street light 6.000 each
bracket made of GI pipe 'A' class of suitable length and dia, the pipe
bended to give an angle of 100 to 110 degree fitted with bolt and nuts at
the top of existing pole or wall including painting the pipe with two coats
of approved paint over prming coat complete in all respects as required:
40mm dia GI pipe heavy class
216 Laying of one number PVC insulated and PVC sheathed / XLPE power 150.000 R/M
cable of 1.1 KV grade of up to 150 sqmm size in the existing RCC/
HUME/ METAL pipe as required. (Laying of MV Cables)
217 CABLE TRAY AND RACE WAY: Supply, laying & fixing 14 SWG single
compartment GI race way of following sizes along-with necessary cable
support system as directed including fixing accessories like dash
fasteners cable ties and junction box etc. complete in all respects
including earthing of trunking with 4sqmm. PVC insulated wires including
cutting chasing of floor and making of good (cutting of floor by
machine).GI Race ways shall be minimum 20mm below floor finish as
required as per approved drawings and directions of Project Manager
218 40x 300 x 40mm deep 75.000 R/M

219 50 x 225 x 50mm deep. 25.000 R/M
220 Supplying & installing following size of perforated pre-painted M.S cable
trays with perforation not more than 17.5%, in convinient sections,joined
with connectors, suspended from the ceiling with M.S suspenders
including bolts & nuts, painting suspenders etc as required.
221 600 mm width x 62.5 mm depth x 2.0 mm thickness 100.000 R/M

222 450 mm width x 62.5 mm depth x 2.0 mm thickness 25.000 R/M
223 DISTRIBUTION BOARD & 3 PHASE METER & SUB MAIN 2.000 Each
DISTRIBUTION BOARD (SMDB): Supplying and fixing 12 Way TPN DB
Double Door (Vertical) surface/ recess mounting, vertical type, 415
volts, TPN MCB distribution board double door of sheet steel, dust
protected, duly powder painted, inclusive of 80 amps tinned copper bus
bar, common neutral link, earth bar, din bar for mounting MCB’s, with
provision of 40A / 63A TP 16 KA MCCB as incomer, interconnection
between incomer MCCB and bus bars ( with 6 MCB’s/ MCCB) as
required.
224 S/I/T/C sheet steel inclosure for 32-63Amp TPN/DP/SPN MCB complete 2.000 Each
with all accessrories as required.
225 MULTIFUNCTION METER: S/I/T/C 3 Phase Multifunction Meter, L&T, 2.000 Each
4410 LED, Class 0.5 with RS 485 along with 3 Nos. CTs of 100/5A
Class-I and 3 phase indicator lamps, internal wiring with copper flexible
wire, all connections, testing, commissioning and other petty material
required to complete the job including labour charges or erection in
existing cubical panels with cost of cutting the panel sheet and din bars
etc.
226 LIGHTING FIXTURES: Supply, Carriage, erection, testing and

commissioning of LED fitting. The lumen output of LED should be
minimum 100 lumens per watt and should be type tested from NABL I
UL accredited laboratory for LM79 & LM80 test reports and copy of
same has to be submitted to the client department. The Fixture supplied
with Electronic high efficiecy driver having Power factor >0.9, THD
<10%. The sample of fitting shall be got tested in the presence of
representative from NABL I UL accredited laboratory and the testing fee
shall be borne by the contractor / supplier.
227 S/E of 40W LED Liner fitting surface mounted. made of extruded 23.000 Each
aluminium heat sink body provided for efficient heat dissipation &
integrated electronic driver suitable for single phase A.C. 230V, 50 HZ
supply, high efficent fixtures complete in all. The job includes cost of
cutting the false ceiling to fix the fitting including giving support of chain
from ceiling or frame and making connection to the nearest point with
copper wires.
228 S/E of 40W LED Liner fitting surface mounted. made of extruded 55.000 Each
aluminium heat sink body provided for efficient heat dissipation &
integrated electronic driver suitable for single phase A.C. 230V, 50 HZ
supply, high efficent fixtures IP65 complete in all. The job includes cost
of cutting the false ceiling to fix the fitting including giving support of
chain from ceiling or frame and making connection to the nearest point
with copper wires.
229 S/E of Surface Mounted LED 40 W Fitting Panel of size 4' foot long 132.000 Each
complete with driver. The fitting is to be fixed on ceiling with anchor
fasteners.
230 12W LED round fitting recess mounted. The job includes cost of cutting 20.000 Each
the false ceiling to fix the fitting including making connection to the
nearest point with copper wires.
231 S/I/T/C of LED street light light fitting of 70W / 72W rating with minimum 3.000 Each
110 lumens per watt. The fitting is to be fixed on existing bracket
mounted on Pole. The job includes cost of fitting, wiring connection etc.
required to complete the job.
232 Supply ,Fixing, testing and commissioning of internal road light poles 3.000 Each
including the cost of providing top 70mm and bottom 130mm dia 3 mm
thick 200x200x12mm MS base plate welded to the base of the pipe ,
Arm Length 1000mm and including digging and including the cost of
masonry base pedestal built with 1:3:6 concrete (1 cement, 3 coarse
sand and 6 graded stone aggregate 40 mm nominal size) provided with
a 200 mm x 150 mm x 100 mm deep looping cable GI box recessed in
the base pedestal / surface mounted fabricated from 14 SWG GI sheets
with hinged gas kitted lockable door, terminal block for incoming and
outgoing PVCA cables, 10 amps SP MCB, 2 Nos. suitable length 25mm
dia GI pipe for incoming and outgoing cables and including the cost of
painting, wiring, in pole from terminal block up to the light fittings with 2 x
2.5 sq.mm copper conductor 1100 volt grade PVC insulated wires along
with loop earthling with 1 no. 8 SWG GI wire, earth stud etc. complete as
required and as below. IS2713-PART II 6 mtr Long Swaged Pole.
Planting depth shall be 600 mm. Height above ground shall be 5.4
metres including MCB & M.S. box etc. as required.
233 S/I/T/C of LED street light light fitting of 25W rating with minimum 110 6.000 Each
lumens per watt. The fitting is to be fixed on existing bracket mounted on
wall. The job includes cost of fitting, wiring connection etc. required to
complete the job.
234 S/E of Self contained with 8W fluorescent tube for non maintained 9.000 each
emergency lighting for 3 hours duration Complete as required.
235 S/E of 230/48Volts 440AH ,Battery charger with rectifier, DC Ammeter, 2.000 each
DC Voltmeter and common DC bus for DC supply to battery.
236 ADDRESSABLE FIRE DETECTION & FIRE ALARM SYSTEM WITH PA: 1.000 Each
Supply, installation, testing and commissioning of Microprocessor based
intelligent analogue addressable, modular, expandable networkable,
following loop (each loop consist of Minimum 99 detector & 99 devices)
fire alarm control panel with minimum 6 inch LCD display, multiple
access levels, event history file in non-volatile memory (EEPROM). The
panel shall have a built-in integrated voice command center with suitable
rating amplifier for 25 Nos. of speakers. The panel shall support
programmable relay for controlling lifts, staircase pressurizations fans,
lift shaft & lift lobby pressurization fans, toilets exhaust fans, ventilation
fans, monitoring of fire sprinkler and fire hydrant pump controlled by
powerful Boolean logic equation. The panel shall have minimum five
independent hazard release circuit built-in the panel. The panel shall
have 240 volts AC power supply, automatic battery charger, 24 volts,
sealed lead acid maintenance free batteries sufficient for 24 hours
normal working and then be capable of operating the system for 4 hours
during emergency condition i /c interfacing connectivity (BAC
Net/modbus gateway) in Fire Panel for integrating with building
management system complete as per Technical specification of tender .
The panel shall be UL/FM listed. (UL 9th Edition Approved) (The panel
shall be complete with suitable power supply to operate the as per
detectors and devices in case of Emergency but not less than 10 Amp.)
237 Supplying, installing, testing and commissioning Automatic Floating 55.000 Each
Sensitivity type Analog addressable Accilimate Multisensor (Photo
thermal) smoke cum heat detector with mounting based LED, address
switch to programme the detectors complete as required.( It shall be
UL/FM listed.)
238 Providing, installing, testing and commissioning of Repeater Panel for 1.000 Each
Fire Alarm System with piezo sounder, LCD alpha numeric character
display with accept/reset buttons for alarm address of any sensor/field
device. The Repeater Panel shall only provide field device address.
Analogue output is not required. The Panel shall be connected to the
Fire Alarm Panel
239 Supply, installation, testing and commissioning of Addressable type fault 4.000 Each
isolator for isolating shorted, dewired and loose circuits between two
successive fault isolators with automatic resetting arrangement (base
model)
240 Supply, installation, testing and commissioning of Addressable control 4.000 Each
relay modules for AHU & stairs Pressurization Fan.Hooter and manual
call point etc.
241 Supply, installation, testing and commissioning of Hooter/Strobe Lights 5.000 Each
with 110 cd. The strobes shall be synchronized for better evacuation.
242 Supply and laying of 2 Core, 1.5 Sq. mm twisted pair copper conductor 1000.000 R/M
cable, low smoke zero halogen, high performance silicon rubber
insulated, overall shielded, sheathed fire survival (HPSR) armored cable
on surface/ recess/ existing couduit/ existing cable tray complete in all
respect as per BS 6387 CWZ, EN50200, LPCB approved for the same
size.
243 Supplying, installing, testing and commissioning of Analog Addressable 1.000 Each
air duct smoke detector with an efficient housing design and sampling
tubes mounting based LED, Address Switch to programme the
detectors, complete as required. (FOR AHU's).(It shall be UL/FM
Listed)..
244 Supplying, installing, testing and commissioning of Response Indicator. 1.000 Each
245 Supplying, installing, testing and commissioning Fire panel supervised 4.000 Each
70db-84db Wall Mounted multi tap 12 Watt Speaker as specified & same
make as of panel.
246 Supplying, installing, testing and commissioning 2 way communication 2.000 Each
Fire Fighter's Handset
247 Supplying, installing, testing and commissioning 2 way communication 2.000 Each
Fire Fighter's Telephone Jack as per specifications complete as
required.
248 Supplying, installing, testing and commissioning Addressable Manual 5.000 Each
Pull Station complete as required.( It shall be UL/FM listed.)
249 NETWORKING AND VOICE SYSTEM: DATA PASSIVE COMPONENT

250 Supply, installation, testing and commissioning of 4 pair Category 6 UTP 500.000 R/M
LSZH cable in existing conduit/ surface/recess/cabletray. Consisting of
24 AWG solid copper conductors complete with flexible jacket and
ripcord for easy stripability etc complete as required as per
specifications.
251 Supply, installation, testing and commissioning of category 6(E) flush 4.000 Each
mounted information outlets wired according to T568B standard with
a faceplate.
252 Supply, Installation & Testing of Cat.6 E UTP 24-port Non-Shutter Patch 1.000 Each
Panel, Un-loaded with Layer II Managed Gigabit Ethernet switch: 8 port
RJ45 10/100/1000 T (POE). INCLUDING SINGLE MODE SFP with
transreceiver all network accessories like patch code , connectors etc for
successful operations etc complete as required .
253 RJ 45 Connectors UTP with all accessories 8.000 Each

254 Supply, Installation & Testing of 1U Cable Management Panel. 1.000 Each
255 Supply, Installation & Testing of Cat6 Patch Cord UTP 2M CM, Blue for 8.000 Each
Field Side.
256 Supply, Installation & Testing of Cat6 Patch Cord UTP 4ft CM, Blue for 5.000 Each
Rack Side.
257 Supply, Installation & Testing of Cat6 Patch Cord UTP 7 ft , Blue for 2.000 Each
User Side.
258 Wi-Fi Access Point for Guest Floor and Admin 4.000 Each
259 WAP Controller for above Aps 1.000 Each
260 12 Port Ethernet Edge Switch 10/100 for Wi-Fi 1.000 Each
261 Core Switch 10/100/1000 cum router for above Wireless Network 1.000 Each
262 CLOSED RACK 12U: Rack 19'' 12 U 600W/800D( with front VNTD 1.000 Each
Glass Lockable Doors,Back Fully perforated Door, lockable and
removable side panels, with 10 pin Vertical PDU
263 Castor ,Tyreman,FT brake & Back STD 1.000 Each
264 Vertical Cable Manager 2.000 Each
265 Fan HSG,90 CFM,4 FAN 1.000 Each
266 Fan 230 VAC,90 CFM 1.000 Each
267 NETWORKING AND VOICE SYSTEM:VOICE PASSIVE COMPONENT
268 Supply ,Installation &Testing of Cat.5 8-port Non-Shutter Patch Panel, 1.000 Each
Un-loaded Field.
269 Supply ,Installation &Testing of 1U Cable Management Panel. 1.000 Each
270 Supply ,Installation &Testing of Cat.5, 8-port Non-Shutter Patch Panel, 1.000 Each
un-loaded Resource.
271 Supply ,Installation &Testing of Cat5 Patch Cord UTP 7 ft , Yellow for 8.000 Each
Rack Side.
272 Supply ,Installation &Testing of 20 Pair MDF Module Frame with 1.000 Each
lockable facility.
273 Supply ,Installation &Testing of 10 Pair disconnection Module for 100 1.000 Each
pair MDF.
274 10 pair Telephone Riser Cable . 1.000 Each
275 Supply & drawing of Cat.5 A 4Pair UTP Cable 305m Blue, CM for Back 2.000 Each
Bone.
276 Supply & Fixing of SOCKET RJ45 CAT5 Non-SHUTTERED KSTONE 8.000 Each
Grey for Back-Bone.
277 supply installation and testing of Rack 19'' 12 U 500W/300D lockable 1.000 Each
and removable side panels, with PDU.
278 CCTV SYSTEM:
279 Supply Installation testing commissioing of 540 TVL Day/Night Dome 6.000 Each
cameras with sensitivity of minimum 1.6 lux (Color) and 0.01 lux(B&W).
The cameras shall use the1/3-inch interline transfer CCD sensor and
shall have a 2.8 to 12mm varifocal lens. The Cameras shall be EN/UL
Listed asper the specifications -(in P&G Area , Lift Lobby and admin
office)
280 Supply Installation testing commissioing of 540 TVL CCD Camera with 4.000 Each
minimum lux level of 0.01 lux. The cameras shall use 2.9 to 8mm
varifocal lens. Electronic Shutter range of 1/50 - 1 / 100,000 sec. The
Cameras shall be EN/UL Listed asper the specification-(in Plant room
and passage)
281 Supply Installation testing commissioing of 540 TVL CCD True Day/Night 1.000 Each
Camera with minimum lux level of 0.001 lux. The cameras shall use 2.7-
13.5 mm varifocal lens. Electronic Shutter range of 1/50 - 1 / 100,000
sec. The Cameras shall be EN/UL Listed asper the specification.
(External Perhaperi)
282 Outdoor Aluminium housing Small, Sleek, Contemporary Design High 1.000 Each
Reliability Die-Cast Construction Tamper-Proof Hardware, with
Heater/Blower, Sun Shroud, Meets IP66 and NEMA Standards. UL,CE,
FCC certified with Inbuilt power adapter for cameras asper the
specification.
283 Supply, installation, testing & commissioning of UL listed DVR 16ch with 1.000 Each
6Slots for HDD and DVD writer,Compression H.264,Outputs CVBS
(BNC),HDMI, VGA ,4 audio input,Control RS 485 and RS 232,16 Alarm
Input ,Video Output Loop Through,ESata connector for backup
device,One front and one rear USB connector for mouse or USB
memory device,Support Joystick Mode Manual, motion detection,
scheduled, alarm,Alarm handling Motion detection Supports NAS
284 Supply, installation, testing and commissioning RG11 Cable in existing 600.000 R/M
Conduit/raceway/cable tray with clamp/sadles/tie as per technical
specification etc complete ar required .
285 Supplying and fixing of 25 mm steel conduit along with accessories in 300.000 R/M
surface/recess including painting in case of surface conduit, or cutting
the wall and making good the same in case of recessed conduit as
required.
286 SITC of 42" LED 1920 x 1080 HD Display System 1.000 Each
287 PLUMBING WORKS
288 SANITARY FIXTURES: All porcelain sanitary ware, CP fittings and
accessories as specified below shall be supplied with complete
accessories by the contractor at site as specified by Architect / Interior.
The supply will be as made by the manufacturer / vendor as their
standard supply. Contarctor will include providing and fixing of all other
accessories, like silicon, extension pieces etc. fixing devices in the
respective item rates for the same in his tender. No extra payment on
this account will be admissible under any circumstances.
289 Providing , fixing, testing and commissioning of of white vitreous china 11.000 Nos.
European type water closet floor/ wall mounted with concealed P trap
and low volume concealed type flushing cistern with internal fittings
made of high grade plastic and non-corrosive metal, matching
polypropelene seat and cover, CP brass hinges rubber buffers, with
accessories, CI/MS concealed brackets painted with two or three coats
of enamel paint of approved shade over a coat of primer. CP brass
screws and wooden cleats, including cutting and making good the wall
and floors wherever required.
290 Providing , fixing, testing and commissioning of C.P. hand spray (health 11.000 Nos.
faucet) with push button control and flexible hose connection with C.P.
holder for hand spray complete in all respects.
291 Providing , fixing, testing and commissioning of CP brass Toilet Paper 11.000 Nos.
Holder fixed to PVC raw plug with SS screws, making holes in walls &
making good.
292 Providing , fixing, testing and commissioning of Under/Over counter 15.000 Nos.
wash basin with C.I. brackets, 32 mm C.P brass/ PP waste fitting and
C.P brass/ PP waterless Bottle trap - of standard pattern, including
supply of CI Bracket fitting, flexible pipe with Supply of painting of fitting,
cutting and making good the walls wherever required:
293 Providing , fixing, testing and commissioning of single lever pillar tap for 14.000 No.
wash basin.
294 Providing , fixing, testing and commissioning of senor pillar tap for wash 1.000 No.
basin.
295 Providing , fixing, testing and commissioning of white vitreous china 4.000 No.
Urinal basin of standard size C.P brass flush pipe, spreaders with
unions and clamps (all in C.P brass) with waste fitting & waterless PP
bottle trap (if required), with outlet grating, Infra-Red based electronic
flushing system operated on 6V DC (4AA) battery for urinals comprising
of solenoid valve, concealed built in strainer & flow mechanism piping,
flush mounted sensors with all accessories & fittings complete in all
respect in fully operational condition and other couplings in C.P brass
including painting of fitting and cutting and making good the walls and
floors wherever required.
296 Providing , fixing, testing and commissioning of of glass urinal partition 4.000 No.
as per interior drawing including providing & fixing concealed CI bracket,
cutting and making good, complete in all respect.
297 Providing , fixing, testing and commissioning of Stainless steel AISI 304 1.000 No.
(18/8) Pantry sink with CI/MS (Painted) bracket and stainless steel plug
40 mm including drain connection with PP 40/50 mm Dia pipe, painting
of fittings and brackets, cutting and making good the walls wherever
required:
298 Providing , fixing, testing and commissioning of of 15 mm CP brass wall 1.000 No.
mounting single hole mixing fitting for sink with swinging and swivel
spout complete including cutting and making good the walls wherever
required.
299 Providing , fixing, testing and commissioning of C.P brass Angular stop 27.000 No.
cock with wall flange (Angle Valve) for basin mixer,health faucet, Shower
& WC etc. of approved quality complete in all respect.
300 Providing , fixing, testing and commissioning of SS finished Robe hook 11.000 No.
fixed to wall / door with wooden cleats and SS screws including cutting
and making good the wall wherever required.
301 Providing , fixing, testing and commissioning of of SS liquid soap 2.000 No.
Dispenser with Metallic Bottle complete including cutting and making
good the wall wherever required.
302 Providing , fixing, testing and commissioning of fully automatic "No 4.000 No.
tough" recessed SS brushed finish hand drier with paper dispencer and
waste bin suitable to operate on 230 volts, single phase, 50 Hz AC
power supply complete with brackets or required fixing arrangeements
for fixing including cutting and making good the walls wherever required
and connection.
303 Providing , fixing, testing and commissioning of adjustable support arm 1.000 No.
for physically challanged persons complete accessories complete as
required including cutting and making good the wall and floor as
required.
304 Providing , fixing, testing and commissioning of white colour Handrail for 1.000 No.
fix mounting 600mm long of for physically challanged persons complete
accessories complete as required including cutting and making good the
wall and floor as required.
305 INTERNAL DRAINAGE
306 Providing, fixing, and testing of uPVC SWR type B pipes and fittings,
Push fit type, as per IS 13592 and fittings as per IS 14735 with factory
fitted lip ring and complete as per specification and as required Vertical
Soil, Waste, Vent/ASP Pipe fixing at wall / ceiling level supported by
Painted M.S angle and G.I clamp with rubber line brackets & hangers
etc. duly epoxy coated. cutting, chases / holes in floors / walls / slab.
307 75 mm dia 5.000 RM

308 110mm Pipe dia 60.000 RM
309 roviding, laying, jointing and testing uPVC pipes conforming to IS 4985
(6 kg/cm2) including injection moulded fittings with bosses e.g. tees,
bends, couplings, adapters etc. and jointing with solvent weld joint,
chasing, making wall good with cement and concrete complete as per
specification and as required indirect waste Pipe.
310 40 mm dia. 20.000 RM

311 50 mm dia. 15.000 RM
312 Providing, fixing and testing of uPVC P or S trap having 50mm water 16.000 No.
seal, including jointing, making good the walls, floors etc., complete of
nominal size - 110x110mm outlet
313 Providing, fixing, testing & commissioning of uPVC inlet fitting with 16.000 No.
maximum 3 inlets 40, 50 OD size, fixed to uPVC traps including solvent
weld joint/rubber ring joint complete with all civil work.
314 Providing ,fixing, testing and commissioning of combination of 110 x 110 5.000 No.
mm elbow and 110 x 50 mm eccentric reducer uPVC waste (as Floor
Drain) with extension piece, elbow & nipple cutting chases, the floor /
slab, repairs complete as required and connection to floor trap
315 Providing ,fixing, testing and commissioning of heavy duty SS grating of 21.000 No.
approved design including setting in floor with cement motor to match
with floor finish as per architect requirement suitable for floor drain and
floor trap: Size 100 mm x 100 mm
316 Providing and fixing in position square stainless steel cockroch trap 16.000 No.
consisting of 0.45 mm thick inner and outer cup and 1.0 mm thick top
grating (Jali) with ring to be fixed inside ‘P’ traps with cement concrete.
(for Floor Trap) - As per approved sample: Size 125 mm x 125 mm
317 Providing & fixing clean out plug with suitable openable fittings, male 7.000 No.
threaded joint with threaded socket fixed to pipe, joints as required
complete in all respects : 110 mm dia
318 Supplying, fabrication and fixing of MS grating fabricated from 16mm 30.000 RM
square rod/ 20x4 mm MS flat having 20mm clear spacing, one piece
upto 1000mm long, fixing angle iron frame 25x25x4 mm angle with hold
fast at 1m c/c in cement concrete and hinged grating madeout of 35x5
mm flats in 1m length inclusiveof welding, griding etc. & including
redprimer & two coats of enamel paint and setin cement mortar 1 : 3 (1
cement : 3 coarse sand) complete in all respect 350 mm wide.
319 Supply, installation, testing & commissioning of G.I. Pipes Class 'C' 30.000 RM
(Heavy grade) conforming to I.S. 1239 with G.I. Fittings conforming to IS
: 1879 such as tees, crosses, plug, socket, elbows, reducers, flange,
check nut, flanges & clamps, hanger, structural steel supports as
required / directed at Site including cutting, making good the walls and
painting with two or more coats of synthetic enamel paint of approved
quality and shade over a coat of approved priming coat as directed by
the Project Manager etc. (For Sump riser): 80 mm dia GI Pipe for Sump
pump
320 Providing, laying, jointing and testing uPVC pipes conforming to IS 4985
(6 kg/cm2) including injection moulded fittings with bosses e.g. tees,
bends, couplings, adapters etc. and jointing with solvent weld joint, C.I
gratings over pipes of bell mouth construction with epoxy painting for
terrace, fixing at wall / ceiling / floor level supported by clamp & hangers
etc. inside duct / suspended from floor under false ceiling.The Pipes will
be supported by either rubber lined G.I. U strap clamps on 50 x 50 x 5
mm MS slotted angle duly painted (for a group of pipes) or G.I. rubber
lined split clamp (for independent pipes). The cost will include all support
arrangements with any minor chasing / chopping / civil masonry work.
commissioning of all pipes lines as per drawings and specifications and
as directed by Project Manager at site.
321 75 mm dia 10.000 RM

322 110 mm dia 20.000 RM
323 160 mm dia 120.000 RM
324 WATER SUPPLY (INTERNAL)
325 Providing, fixing, testing and commissioning of PP-r (Polypropylene
Random) glass fibre compound 3 / 5 layer food grade pipe of PN – 16 in
accordance with DIN EN 21003 for Domestic, Flushing & Hot water
application with corresponding hot fusion welded, PR-r fittings like Tees,
elbows, sockets, Reducers, Unions, brass wall adaptors (both male and
female) etc. Cutting and making good the walls, floors, RCC work etc.
cutting chase and filling the same with cement concrete 1:3:6 (1 Cement
:3 Coarse sand : 6 graded stone aggregate 20 mm nominal size ) or
cement Mortar (1 Cement : 4 Coarse sand) as required. . (Concealed
Piping)
326 15 mm dia 80.000 RM

327 20 mm dia 40.000 RM
328 Providing, fixing, testing and commissioning of PP-r (Polypropylene
Random) glass fibre compound 3 / 5 layer food grade pipe of PN – 16 in
accordance with DIN EN 21003 for Domestic, Flushing & Hot water
application with corresponding hot fusion welded, PR-r fittings like Tees,
elbows, sockets, Reducers, Unions, brass wall adaptors (both male and
female) etc. supported by clamp & hangers etc. inside duct / suspended
from floor under false ceiling.The Pipes will be supported by either
rubber lined G.I. U strap clamps on 50 x 50 x 5 mm MS slotted angle
duly painted (for a group of pipes) or G.I. rubber lined split clamp (for
independent pipes). The cost will include all support arrangements with
any minor chasing / chopping / civil masonry work. commissioning of all
pipes lines as per drawings and specifications and as directed by Project
Manager at site.. (For Shaft and Terrace)
329 25 mm dia 75.000 RM

330 32 mm dia 60.000 RM
331 Providing, fixing, testing and commissioning of forged brass ball valve
(PN 10) with hard chrome plated ball inside PTFE (Teflon) seat & ring
with chrome plated centre handle withfemale BSP threads complete in
all respects.
332 15 mm dia 1.000 Nos.
333 20 mm dia 4.000 Nos.
334 25 mm dia 4.000 Nos.
335 32 mm dia 2.000 Nos.
336 Providing, fixing, testing and commissioning of cast iron wafer type 1.000 Nos.
butterfly valves (PN 16) as per IS:13095, with SS disc, shaft, seating
rings, internal fastening, nitrile rubber lining, nuts, bolts including
transporting to worksite, 3 mm thick rubber gaskets etc. including
testing, Complete as per drawings & directions of the Project Manager.:
50 mm dia
337 Providing, fixing, testing and commissioning of C.I. double acting air 4.000 No.
release valve of approved quality with bolts, nuts, rubber insertion, tail
pieces, tapers, with ball valve etc. as required complete.: 25 mm dia
338 Providing ,fixing, testing and commissioning of IP 67 (Weather Proof 1.000 No.
/Aluminum casing with positioner to indicate the valve position with key
type manual overdrive) Motorized Butterfly valve / Ball valve of following
dia with limit switch arrangement for filling of over head water tank
complete with high and low level float type sensors to control the
valve .The sensors shall be installed in over head tanks. The sensors will
close the valve when water level is high in over head tank and open the
valve when over head water tank level is low. The system should be
complete in all respects with control panel indicating the position of valve
i.e. open /closed with pressure switches at pump discharge, accessories
like wiring / conduting / flanges, nut bolts etc. All the control switchgears,
connections, wiring, integration etc. should be included in the quote. No
additional payment shall be charge for any work against this item.: 25
mm dia
339 WATER SUPPLY EXTERNAL

340 Providing,laying and jointing in position PE-80 HDPE pipe confirming to
IS: 4984 and suitable working prssure of 12.5 bar and tested at 20 bar
pressure with all fitting and accessories e.g - coupling, Tee, bends,
reducer, flanged tail pieces etc jointing as per manufacturer
specification/instruction. Cost shall inclusive of excavation upto required
depth, filling sand alround, consolidation each deposited layer by
ramming, watering etc, backfilling and disposing of surplus excavated
soil as directed by Project Manager complete in all respect. (External
Water Supply).
341 32 mm Dia 150.000 RM

342 40 mm Dia 20.000 RM
343 110 mm Dia 40.000 RM
344 Providing and fixing truck fill point consisting of 100mm dia. Water filling 1.000 Set
point with butterfly valve and NRV having 100mm dia brass plug
including suitable locable housing of approved design.
345 Supplying, fixing, jointing and testing in position the following heavy
class (Class C) GI pipes conforming to IS:1239 cut to required lengths
including all necessary fittings (All fittings shall confirm to IS:1879 - part
1 to 10) and specials such as bends, tees, unions, reducers, flanges &
plugs etc including testing of pipes at twice of working pressure. Cost
shall be inclusive of providing two coats of synthetic enamel paint of
approved shade on exposed pipes, over a coat of red oxide , primer.
Cost shall also inclusive of excavation upto required depth, filling sand
alround, consolidation each deposited layer by ramming, watering etc,
backfilling and disposing of surplus excavated soil as directed by Project
Manager complete in all respect. ( For Garden Hydrant)
346 25 mm dia 25.000 RM

347 50 mm dia 250.000 RM
348 Providing and fixing ball valve (PN 10) with hard chrome plated ball 10.000 No.
inside PTFE (Teflon) seat & ring with chrome plated centre handle
withfemale BSP threads complete:in all respects: 25mm dia nominal
bore
349 Providing and fixing 20 mm brass QRQC hydrant valve with PVC lid 10.000 No.
complete in all respects.
350 Providing and fixing 20 mm brass keys for hydrant valve complete in all 10.000 No.
respects.
351 Providing, fixing, testing and commissioning of cast iron double waffer
type flanged butterfly valves (PN 16) as per IS:13095, with SS disc,
shaft, seating rings, internal fastening, nitrile rubber lining, nuts, bolts
including transporting to worksite, 3 mm thick rubber gaskets etc.
including testing, Complete as per drawings & directions of the Project
Manager.
352 50 mm dia 2.000 Nos.

353 100 mm dia 1.000 Nos.
354 Constructing masonry chamber with 75 class designation bricks in 2.000 No.
cement mortar 1:5 (1 cement : 5 coarse sand) for ball valve with CI
surface box 100 mm top dia 160 mm bottom dia and 180 mm deep
(inside) with chained lid and RCC top slab 1 : 2 : 4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary
excavation foundation concrete 1 : 5 : 10 mix (1 cement : 5 coarse sand
: 10 graded stone aggregate 40 mm nominal size) and inside plastering
with cement mortar 1 : 3 (1 cement : 3 coarse sand) 12 mm thick
finished with a floating coat of neat cement and outside plaster finished
rough complete as per standard design, including fixing of SFRC heavy
duty Manhole cover and frame in 150 mm thick cement concrete 1:2:4
(1cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal
size) including centering, shuttering, excavation, refilling and disposal of
surplus earth as directed complete in all respects. (Include the cost of
Manhole cover and frame): Inside size 450 x 450 mm & 600 mm deep
355 Providing & fixing digital type water meter with direct reading dial in KL
with all internal parts in gunmetal or brass, butterfly valve, strainer,
flanged distance piece for easy removal in future, Bourden type pressure
guage and isolation cock including necessary test certificate for the
meter from local municipal authorities.
356 25 mm dia for Domestic Water Supply Riser 1.000 Set

357 50 mm dia for Municipal Inlet & Irrigation Water Supply 2.000 Set
358 Providing, fixing, testing and commissioning of multistage,
horizontal/vertical, centrifugal, 2 pole, 50 HZ, AC pumps incorporating
C.I. casing and frame, stainless steel shaft, bronze / SS impeller, TEFC
induction motor directly coupled to the pump, IP44 protection, class B
insulated, C.I. body, hydraulically and dynamically balanced to give
vibration free operation, with mechanical seal arrangement, fixed on a
base plate with suitable vibration eliminator pads complete with level
controller, electrical control panel / starter panel, necessary wiring /
Cabling, pressure gauge, valves, vibration eliminators on the delivery
side and strainer on suction side, including non-return valve and
isolating valves on suction and delivering sides as required, including
suction, delivery headers and interconnecting piping (G.I. Heavy Class)
complete in all respects. -
359 Domestic Trasfer Pumps For Overhead Tank Filling; Flow rate (each) 1.000 Set
= 2.0 M3 /hr; Pumping Head = 45 m; 1 Set (2 Nos Pumps.
1 Working + 1 Standby); Location : Plumbing Plant Room
360 Making connection of Municipal water line with existing Muncipal line 1.000 Job
including excavation, construction of valve chamber & making good the
walls, floors, road etc. Proper water proofing to ensure no. ground water
seepage in the manhole: For 100 to 300mm dia pipe
361 EXTERNAL SEWAGE & DRAINAGE WORKS

362 Excavating trenches in all kind of soil of required width for pipes, cables 400.000 RM
etc including excavation for socket and dressing of sides ramming of
bottoms depth upto 1.50 m including timbering, shuttering, centering etc.
as required getting out the excavated soil and then returning the soil as
required in layers not exceeding 20 cm in depth including consolidating
each deposited layer by ramming, watering etc. and disposal of surplus
excavated soil within the site premises as specified by Project Manager:
Pipes cables etc exceeding 80 mm dia but not exceeding 300 mm dia.
363 Extra for excavating trenches for pipes, cables etc. in all soils for depth 130.000 RM
exceeding 1.50 m but not exceeding 3.0 metre.(Rate is extra over
corresponding basis item for depth upto 1.5 m)
364 Providing and laying non pressure NP2 class RCC pipes S & S jointed
with stiff mixture of cement motrar in the proportion of 1 : 2 (1 cement : 2
fine sand) including testing of joints etc. complete
365 150 mm dia 100.000 RM
366 200 mm dia 250.000 RM
367 250 mm dia 200.000 RM
368 Providing and laying cement concrete 1:5:10 (stone agg. 40 mm
nominal size) in bedding & haunches of RCC pipes.
369 150 mm diameter RCC Pipe 100.000 RM
372 Providing & fixing square-mouth uPVC gully trap complete with grating,
brick masonry chamber with bricks of class designation 75 in cement
mortar 1:5 (1 cement : 5 coarse sand) inside plaster above trap 12mm
thick m cement mortar 1:3 (1 cement : 3 coarse sand) finished with a
floating coat of neat cement outside plaster 12mm thick in cement
mortar 1 :3 ( 1 cement : 3 coarse sand) 10cm thick foundation concrete
1 : 5 : 10 mix (1 cement : 5 coarse sand : 10 graded stone aggregate
40mm nominal size) space between chamber, and trap filled with
cement concrete 1:2:4 (1 cement : 2 coarses and : 4 graded stone
aggregate 20 mm nominal size) and water tight C.I. cover with frame of
300x300 mm size (inside) the weight of cover to be not less than 4.50 kg
and frame to be not less than 2.70 kg asper standard design.
373 300 x 300 mm gully trap chamber with 150 x 100 mm 'P' trap with water 5.000 No.
tight C.I. cover with frame 300 x 300 mm size (inside) the weight of
cover to be not less than 4.5 kg and frame to be not less than 2.7 kg as
per standard design.
374 Constructing brick masonry road gully chamber 450 x 450 x 600 mm 11.000 No.
wtth bricks of class designation 75 in cement mortar 1:5 (1cement : 5
coarse sand), inside cement plastering 12mm thick with cement
mortar1 : 3 (1 cement: 3 coarse-sand) finished witha floating coat of neat
cement, outside plaster 12 mm thick in cement mortar 1 : 3 (1 cement : 3
coarse sand) 10 cm thick foundation concrete 1 : 5 : 10 mix (1 cement :
5 coarse sand : 10 graded stone aggregate 40mm nominal size)
including 500x450 mm RCC horizontal grating wilh frame fixed in15cm
thick cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 grade stone
aggregate 20 mm nominal size) including excavation, refilling and
disposal of surplus earth as directed by PMC complete as per standard
design.
375 Extra depth for road gully chambers 450 x 450 rnm. 4.000 RM
376 Constructing brick masonry rectangular type manhole with sewer bricks
conforming to IS 4885 in cement mortar 1 : 5 (1 cement : 5 coarse sand)
inside cement plastering 12 mm thick with cement mortar 1 : 3 (1
cement : 3 coarse sand) finished with a floating coat of neat cement,
outside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand)
foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40mm nominal size). RCC top slab with 1 : 2 : 4 mix
and making necessary channels in cement concrete 1 : 2 : 4 (1 cement :
2 coarse sand : 4 graded stone aggregate 20mm nominal size), inside
finished with a floating coat ot neat cement including excavation, refilling
and disposal of surplus earth as directed by Project Manager complete
as per standard design.
377 600x600mm upto 800mm deep with ISI marked steel fiber reinforced 3.000 No.
concrete (SFRC) manhole cover and frame having hold fasts (Heavy
Duty HD-20). 600 x 600 mm size.
378 900x800mm upto 1500mm deep with ISI marked steel fiber reinforced 18.000 No.
concrete (SFRC) manhole cover and frame having hold fasts (Heavy
Duty HD-20) 560 mm internal diameter.
379 Extra depth for Rectanguler type manhole as per above item
380 600x600mm Size Manhole above 800mm dia 1.000 RM
381 900x800mm Size Manhole above 1500mm dia 5.000 RM
382 RAIN WATER HARVESTING SYSTEM
383 Construction of rain water harvesting size 3m dia x 3.5m effective depth
for the re-charging of storm water run off including the civil work with
following specification [Construction of Chamber].DE-SILTING
CHAMBER: Providing and constructing mansonary de-silting chamber
2000mm x 1500mm with 1.0 m effective depth inside with 75 class
designated brick work in cement mortar 1:6 (1cement : 6 fine sand) with
C.I double seal heavy duty 560mm dia manhole cover (2 Nos.). top slab
1:2:4 mix (1cement : 2coarse sand : 4 graded stone aggregate 20mm
nominal size) with minimum 1.5% reinforcement, foundation concrete
1:5:10 (1cement : 5 fine sand:10 grade stone aggregate 20mm nominal
size including baffle wall, necessary excavation, back filling and disposal
of surface earth. Complete with inlet, outlet and overflow arrangement.
Foot rest @400mm c/c, grating of required size with 16mm sq.bars and
frame @20mm clear spacing fixed at month of pipe as per site
conditions and direction of Project Manager ; DRILLING: Drilling
percolation borehole 200mm dia with reverse rotary method in all types
of soil upto 40mm depty including cost for mobilization of rig and making
good the area upon completion of work. Contractor shall arrange for all
necessary tools, water and consumable and laying for drilling; Providing
and laying pea gravel all around the casing pipe; 160 mm dia slotted
UPVC pipe of 6 Kg/cm2 - 35 m -40m or as per site sub-strata or set as
per direction of Project Manager; 160 mm dia UPVC blind pipe of 6
Kg/cm2; RAIN WATER HARVESTING WELL FILTRATION CHAMBER:
Providing and constructing rain water harvesting well/filtration chamber
of size 3m dia x 3.5m eff. depth inside with 75 class designated brick
work in cement motor 1:6 (1cement : 6 fine sand) with 560mm dia C.I
double seal medium duty manhole cover with top slab 1:2:4 mix
(1cement : 2 course sand :4 graded stone aggregate 20mm nominal
size) with minimum 1.5% reinforcement , foundation concrete 1:5:10
(1cement : 5 fine sand and 10 graded stone) aggregate 20mm nominal
size including 300mm duty. Boulder 10-20mm, 300mm duty, gravel 5-
10mm size, 300mm depth coarse sand 1.5-2.0mm including necessary
excavation, back filling and disposal of surface earth complete with inlet,
384 outlet, overflow
Rate shall arrangement
include excavation,pvc coated
back fillingFoot
and Rest, 100mm
all other dia deep
operations 1.000 Set
necessary for completing the job.
385 Providing and constructing Soak pit (2.0 Mtrs. Dia) with septik tank of 1.000 Set
size 3.0 m x 2.0m and eff. depth 2.0 m inside with 75 class designated
brick work in cement motor 1:6 (1cement : 6 fine sand) with 3 Nos.
560mm dia C.I double seal medium duty manhole cover with top slab
1:2:4 mix (1cement : 2 course sand :4 graded stone aggregate 20mm
nominal size) with minimum 1.5% reinforcement , foundation concrete
1:5:10 (1cement : 5 fine sand and 10 graded stone) aggregate 20mm
nominal size including necessary excavation, back filling and disposal of
surface earth complete with inlet, outlet, overflow arrangement pvc
coated Foot Rest, 100mm C.I vent pipe -2m height with cowls.
386 FIRE FIGHTING WORKS

387 FIRE PUMPS, EQUIPMENT, PIPING, VALVES & ACCESSORIES :
Electric Motor Driven Hydrant Pump (Location - Fire/Plumbing Plant
Room) : Supplying, installing, testing and commissioning of Fire
authority approved, factory assembled and tested Electrical driven fire
pump suitable for automatic/ manual operation consisting of the
following: Horizontal end suction, high pressure single/ multistage
centrifugal type fire pump capable of delivering 1620 LPM (27 LPS)
against a total head of 60 M while running at 2900 RPM complete with
mechanical seal, proper connection to suction and delivery line, and
including 100 mm bypass arrangement for testing of pumps, having a
name plate indicating suction, delivery, head, discharge, stages, RPM
and direction of rotation; Pump shall be capable of furnishing not less
than 150% of rated capacity at a head not less than 65 % of rated head.
The shut off head shall not exceed 120% of rated head; Squirrel cage,
induction motor, TEFC type, efficiency class. eff-1, suitable for 415 +
10%V, 3 phase, 50 Hz, AC supply, of suitable HP rating for the above
pump with a synchronous speed of 2900 RPM conforming to IP 55
protection & class 'F' insulation. The motor shall conform to IS 12615 :
2004 and IS 325 : 1978 (up to date) with flexible coupling and coupling
guard; Common base plate for mounting pump and motor fabricated of
mild steel channel as per manufacturer's recommendation with heavy
duty Anti Vibration pads (6 Nos., heavy duty); Flexible Coupling and
coupling guard for direct coupling of pump and motor; Drain Pipe with
Valve (50 mm dia) (For independent testing respective pump); Main Fire
Pump; Discharge : 1620 LPM (27 LPS) ; Pumping Head : 60 M; Motor
KW (Approx) : 35 KW/As per manufacturer recommendation.
388 Rate should include interconnection fire survival cables and foundation 1.000 Set
bolts, grouting of Foundation bolts and other accessories required.
389 Diesel Engine Driven Fire Pump [Stand by pump] (Location
-Fire/Plumbing Plant Room) : Supplying, installing, testing &
commissioning of fire authority approved, factory assembled and tested
Diesel Engine driven fire pump suitable for automatic/manual operations
consisting of the following : Horizontal end suction, high pressure single
centrifugal type fire pump capable of delivering 1620 LPM (27 LPS)
against a total head of 60 M while running at 1500 RPM complete with
mechanical seal, proper connection to suction and delivery line, and
including 100 mm bypass arrangement for testing of pumps, having a
name plate indicating suction a delivery head, discharge, stages, RPM
and direction of rotation; Heat Exchanger cooled diesel engine of
required BHP or as per manufacturer recommendation at 1500 RPM for
the above pump complete with standard accessories & suitable cooling
system as described in specifications; Common base plate for mounting
pump & engine of required strength manufactured out of M.S. channels
as per manufacture's recommendation with heavy duty Anti Vibration
pads. (Cushy foot) (8 nos., heavy duty); Flexible Coupling & coupling
guard for direct coupling of engine & pump; 1 No. minimum 8 hours
capacity day oil storage tank fabricated from 3 mm thick M.S. plates.
Tank shall be provided with inlet, outlet, overflow, air vent, drain
connections, filling connection & magnetic level indicator. Tank shall be
mounted on a suitable steel structure (Painted with 2 coats of red oxide
paint). Tank shall be provided with epoxy coat from inside & two or more
coats of synthetic enamel paint outside over two coats of red oxide
primer. Diesel storage tank shall be double skin; 12 volts 180 AH lead
acid battery (12 volts - 1 Nos) with boost/Trickle charger for starting the
engine automatically complete as required; Diesel Engine driven pump
of: Discharge : 1620 LPM (27 LPS) ; Pumping Head : 60 M;
Engine HP (Approx) : 40 HP/ As per manufacturer recommendation;
Jockey Pump :-
390 Rate should include inter connecting fire survival cables & foundation 1.000 Set
bolts, grouting of Foundation bolts and other accessories required.
(Common for Hydrant & Sprinkler System)
391 Electrical Motor Driven Jockey Pump
(Location - Fire/Plumbing Plant Room) : Supplying, installing, testing &
commissioning of fire authority approved, factory assembled and tested
electrically driven Jockey pump suitable for automatic/manual operation
consisting of the following: Vertical multistage jockey pump having SS
body S.S. impeller, stainless steel shaft with mechanical seal capable of
delivering 180 LPM against total head of 60 M while running at 2900
RPM complete. The system shall be complete with necessary pressure
gauge with gun metal shut off cock on delivery side including bypass
arrangement (with 50 mm GM stop valve and up to 5 meter G.I. class 'C'
pipe) for testing of working of the pumping set as required. The pump
should meet the recommended requirement and must be approved by
the local fire authority; Squirrel cage induction motor suitable for 415 +
10%V, 3 phase, 50 Hz, AC supply of suitable HP rating for the above
pump with asynchronous speed of 2900 RPM T.E.F.C type having
effliciency class eff-1 as per IS 12615 : 2004, connected to pump with
flexible coupling and coupling guard ; Common base plate for mounting
pump and motor fabricated of mild steel channel as per manufacturer's
recommendation with heavy duty 4 Nos. Anti Vibration pads.(Cushy
foot); Drain pipe with valve (25 mm dia); Discharge : 180 LPM (3
LPS); Pumping Head : 60 M; App. HP/KW : 5.0 KW/ as per
manufacturer recommendation
392 Rate shall include inter connecting fire survival cables, grouting of 1.000 Set
Foundation bolts and other accessories required.
393 Providing, fixing, testing and commissioning of precharged air vessel 1.000 Each
(size 450 mm dia & 1500 mm height) fabricated shell from 8 mm thick &
dished end 10 mm thick M.S. Plate for pressurization of hydrant/
sprinkler system complete with adequate pressure switches (as per
design / requirement) with valve to operate as per operating sequences
including 25 mm dia drain valve, air release valve with ball cock on top,
80 mm dia flanged inlet with isolating valve duly painted from inside and
out side complete as required.
394 Supply, installation, testing and commissioning of M.S Class 'C' (Heavy
Duty) pipes conforming IS:1239/3589, with all necessary fittings like
tees, coupling, mechanical tees, strap tees, elbows flanges, reducers,
gaskets, nuts, and bolts etc. with welding joints as required including
fixing the pipe with necessary structural supports including painting of
two coats of synthetic enamel paint over two coats of red oxide primer
including all civil breakage and making good the coats of red oxide
primer including all civil breakages and making good the same.
(Location: Fire Plant Room)
395 150 mm dia G.I. Pipe 30.000 RM

396 200 mm dia (6 mm thick) with necessary supports etc. as required. 18.000 RM
397 Providing, fixing, testing & commissioning of flanged end Y-strainer 1.000 Each
made from C.I body having SS filter mesh- 200 mm dia
398 Providing, fixing, testing & commissioning of C.I Butterfly valve
conforming to IS : 13095 with flanges fittings, nuts, bolts and washers
complete for following sizes :- [PN 10 rating (10 kg/cm2 pressure
rating)].
399 200 mm dia 2.000 Each
400 150 mm dia 7.000 Each
401 100 mm dia 1.000 Each
402 80 mm dia 1.000 Each
403 50 mm dia 2.000 Each
404 Providing, fixing, testing & commissioning of C.I dual plate non-return
valve [PN 10Rating (10 kg/cm2 pressure rating)] complete with 2 nos.
matching flanges, rubber insertion, with nuts, bolts and washers etc of
following sizes .
405 150 mm dia 2.000 Each
406 80 mm dia 1.000 Each
407 50 mm dia 1.000 Each
408 Providing & fixing dial type (100 mm dia) SS body pressure gauge with 6.000 Each
isolation ball valve suitable for working pressure of 150 PSI cost shall be
of inclusive of providing any short pieces, nipples, elbows etc as
required. having calibration of 0-10 Kg/cm2.
409 Providing, fixing, testing & commissioning of resilient rubber lined single
arch vibration eliminators suitable for raw water up to 45oC temperature,
working pressure 10 Kg/cm2 and test pressure 15 Kg/cm2 for :-
410 150 mm dia 4.000 Each

411 100 mm dia 1.000 Each
412 80 mm dia 1.000 Each
413 Providing, fixing, testing & commissioning of M.S. class 'C' diesel pump 15.000 RM
exhaust pipe (80mm) including all fittings like bends, tee,
clamps/structural steel support of suitable dia for the engine . The
insulation of the exhaust pipe shall be carried out with rock wool with
specific gravity of 100kg/cm2 and cladded with 22 gauge aluminium
sheet.
414 ELECTRICAL WORKS

415 Fire Fightimg Control Panel: SITC of following fire fighting panel suitable
for 415 V, +/- 10% Volts, 3 phase, 4 wires, 50 Hz power distribution
system. The panel shall be free standing floor mounting sheet metal
enclosed dust and vermin proof conforming to IP-52, compartmentalized
design, fabricated out of 14 SWG sheet steel, painting, earthing
numbering, danger plate as per specifications and drawings , flush front
with Aluminium busbars, separate earth bus bars of 40 x 5 mm
(Aluminium) to be provided throughout the length of the panel. The
incoming and outgoing feeder breakers, fuses, indicating lamps etc shall
be accommodated in a modular multitier arrangement. The painting shall
be done as per relevant IS codes/as specified in the specifications.
Adequate size cable alley shall be provided all round the panel and in
the back for each cable bending and termination. The panel shall be
fabricated by TAC/Fire authority approved vendor. The outgoing feeders
inside the panel shall be connected through solid bus bars. Flexible
cable links are not acceptable; Bus bars shall be provided with heat
shrinkable sleeves and shall be colour coded. The panels shall be
suitable for cable entry from top. The panels shall be fabricated after the
approval of fabrication drawings; All wires shall be PVC insulated and
cables used will be XLPE insulated. 2 Nos. earthing terminals shall be
provided for 3 phase, 415 V, 50 HZ supply system. M Lifting hooks
shall also be provided in case of large panels. Cadmium plated
hardware shall be used in fabrication of Panels; Fire Fighting Panel:
Incoming : One (1) No. 200A TPN MCCB (25 KA); One (1) No.
Multifunction Meter for measurement of voltages, current and frequency
(ELF-3254 of conzerv or approved Equivalent) with suitable ratio CTs
and back up SP MCB/Fuses; 1 Set (3 Nos.) of phase indication lamps
LED Type with backup SP MCB; Three (3) Nos. of indication lamps for
ON/OFF & Trip with backup SP MCB- Busbar :- 250A, 25KA,TPN
Aluminium busbar insulated with PVC Colour coded heat shrinkable
sleeve; Separate earth busbar of 50X6mm Aluminium shall be provided.
Outgoing: One (1) Nos. 160 A TP+N MCCB (35kA); One (1) Nos. 63A 4P
MPCB; One (1) No. DOL Starters complete with over load relay with
416 separate single
Fire Fighing phasing
Panel protection
described feature,
as above and ON/OFF & TRIP, indication
as per SLD. 1.000 Set
417 Supply, installation, testing & commissioning of following sizes of 1100 V
grade XLPE insulated PVC inner & outer sheathed, Aluminium, fire
survival armoured cables, as per site conditions.
418 3.5C x 120 Sq.mm 40.000 RM
419 4C x 50 Sqmm 1.000 RM
420 3C x 16 Sqmm 40.000 RM
421 3C x 10 Sqmm 1.000 RM
422 4C x 16 Sqmm 1.000 RM
423 Copper Conductor Armoured fire survival Control Cables :
424 4C x 2.5 Sq.mm 50.000 RM
425 5C x 2.5 Sq.mm 1.000 RM
426 Cable Termination: Supply & making end termination with brass double
compression glands for the following XLPE insulated, PVC sheathed &
armoured 1100 V grade Aluminium cable including cost of crimping
lugs/ferrules, compression glands, solder, cable sockets, insulation tape
etc complete as required.
427 3.5C x 120 Sqmm 4.000 Nos.

428 4C x 50 Sqmm 1.000 Nos.
429 3C x 16 Sqmm 2.000 Nos.
430 3C x 10 Sqmm 1.000 Nos.
431 4C x 16 Sqmm 1.000 Nos.
432 Cable Termination : Suitable for Copper Conductor Armoured Control
Cables :
433 4C x 2.5 Sq.mm 8.000 Nos.
434 5C x 2.5 Sq.mm 1.000 Nos.
435 Supply and installation of GI ladder type/perforated type cable trays of
the following sizes fabricated out of perforated hot dip galvanised MS
sheets of minimum 2mm thick with 75mm flange to be installed
horizontally or vertically: Ladder Type Cable Tray
436 300mm wide 35.000 RM
437 150mm wide 25.000 RM
438 Perforated Type Cable Tray
439 300mm wide x 50mm x 2mm 10.000 RM
440 150mm wide x 40mm x 2mm 10.000 RM
441 Earthing: Supply, Installation, Testing & Commissioning of the following
size of GI strip/wire clamped to wall, cable trays complete as required
including interconnection between lengths at joints, all fixing accessories
saddles, calmps etc. and other fixing hardware.
442 50 x 6 mm strip 1.000 RM
443 25 x 6 mm strip 25.000 RM
444 25 x 3 mm strip 1.000 RM
445 8 SWG GI wire 20.000 RM
446 FIRE HYDRANT SYSTEM (INTERNAL) : SUPPLY, INSTALLATION,
TESTING AND COMMISSIONING OF: 'C' class heavy duty M.S. pipe
conforming to IS 1239 including welding/threading, jointing with all
fittings like elbows, tees,bends,flanges, tappers, nuts bolts, gaskets etc.
and fixing the pipe on the wall/ceiling with suitable clamps & structural
steel support including cutting holes and chases in brick work and RCC
work and painting with two coats of red oxide primer and two coats of
synthetic enamel paint of required shade complete as required. Notes:
Pipes upto and 50 mm dia shall be threaded joints, above 50 mm shall
be done with Welded joints. Notes: Pipe sleeve of suitable higher size
shall be provided wherever the pipes are crossing the wall/
floors/sealing, the sleeves with glass wool in between minimum 2 Hrs
rated firestop sealant compound at either end, age tested to dafStb
guidelines complete as per project manager's requirement or
manufacturers reccomendation.
447 80 mm dia 12.000 RM

448 100 mm dia 20.000 RM
449 150 mm dia 50.000 RM
450 Providing, fixing, testing & commissioning of ISI marked S.S. metal 4.000 Each
single headed fire hydrant landing valve with Inbuilt pressure reducing
valve with flanged inlet, SS spindle controlled 63 mm dia female
instantaneous outlet type. CI wheel, SS coupling, blank cap, chain, twist
release type lug & all accessories. Conforming to IS:5290. (type A)
Including fixing with anchor fastner and flanged tapping from wet riser
and providing pressure gauge with gun metal ball valve complete as
required.
451 Providing, fixing testing and commissioning of UL listed 63 mm dia 15 m 8.000 Each
long non-percolating flexible hose (RRL- type A) as per IS : 636. Type
"A" with Stainless steel male & female instantaneous type coupling (IS
903) bound and riveted to hose pipe with copper rivets and 1.5 mm
copper wire (For internal).
452 Providing, fixing testing and commissioning of Stainless steel branch 4.000 Each
pipe with nozzle of 20 mm nominal bore outlet as per IS:903 suitable to
fit with standard instantaneous type 63mm dia coupling ISI marked
(IS:903) complete.
453 Standard Fireman's Axe with heavy insulated handle. 4.000 Each
454 Providing, fixing testing and commissioning of Wall mounting swinging 4.000 Set
type first aid fire hose reel with drum, hanging bracket, 30.0 Mtr. length x
20 mm dia thermoplast hose reel tubing as per IS:12585 with Stainless
steel (SS) shut off nozzle having 6.5 mm dia orifice. The hose reel shall
be conforming to IS : 884-1985. Rate shall include 25 mm dia M.S. pipe
(heavy class) connection from Riser to hose reel, sockets, nipples,
elbows and ball valve (25 mm dia). Drum shall be fixed on adjoining wall
by means of 120 mm x 100 mm long fasteners, bolts and nuts including
painting. (For internal hydrant system).
455 Providing & fixing fire authority approved M.S. hose door (size 900 (L) x 4.000 Each
2100 (H)) made out of 16 SWG powder coated M.S. sheet Angle frame
capable of accommodating fire hose reel, fire hydrant, hose pipe, fittings
& accessories. The box shall have a single or double glazed front glass
door (with 4 mm thick glass) with lock & key arrangement & shall be
painted with Fire red as per IS:5, shade no. 536. (Location : For Internal
Hydrant)

conforming to IS : 13095 with flanges/grooved fittings, nuts, bolts and
washers complete for following sizes :- [PN 10 rating (10 kg/cm2
pressure rating)].
457 150 mm dia 1.000 Each
458 100 mm dia 2.000 Each
459 80 mm dia 4.000 Each
460 Providing & fixing cast iron air release valve of 25 mm dia including 25 1.000 Each
mm dia Ball valve with fittings etc. as per the requirement.
461 Bourden type Stainless Steel dial type pressure gauge with brass 4.000 Each
isolation valve and pipe. (For each internal Fire hose cabinet) of dial
diameter : 150 mm & Caliberation : 0-15 Kg/cm2
462 Providing and fixing M.S. structural work fabricated from standard 400.000 Kg
sections, (MS rounds, angles, channels etc.) including cutting to size,
drilling, welding, including cost of fasteners, clamps in RCC structural
members as directed, including two or more coats of synthetic paint over
one coat of primer after surface preparation including cutting and making
good walls.
463 Air cushion tank (air-vessel) 250 mm dia. x 1.0 m high with dished top, 1.000 Each
made of minimum 6 mm thick MS pipe/plate complete with 25 mm dia.
brass air valve (ball valve, pressure gauge type), 25 mm dia brass stop
cock, nipple, tees, B46 elbow, pipe and all accessories as required incl.
fixing brackets.
464 FIRE HYDRANT SYSTEM (EXTERNAL)

465 Supply, laying, testing & commissioning of 'C' class heavy duty M.S. pipe
conforming to IS 1239 including grooved/threaded jointing with all
Pipes upto and 50 mm dia shall be threaded joints, above 50 mm shall
be done with welded joints. Steel structural supports are included in this
items. Pipe sleeve of suitable higher size shall be provided wherever the
pipes are crossing the wall/ floors/sealing, the sleeves with glass wool in
between minimum 2 Hrs rated firestop sealant compound at either end,
age tested to dafStb guidelines complete as per project manager's
requirement or manufacturers reccomendation.
466 80 mm dia 12.000 RM

467 100 mm dia 50.000 RM
468 150 mm dia 575.000 RM
469 Providing and applying one coat of 4 mm thick anti rust pipe protection
including approved primer as per manufactures specifications and lap of
25 mm to make an impermeable layer on M.S. Pipes in trenches or
structural /masonary members complete including surface preparation.
470 80 mm dia 6.000 RM

471 100 mm dia 20.000 RM
472 150 mm dia 50.000 RM
473 Providing, fixing, testing & commissioning of ISI marked S.S. metal 6.000 Each
single headed fire hydrant landing valve with Inbuilt pressure reducing
valve with flanged inlet, SS spindle controlled 63 mm dia female
instantaneous outlet type. CI wheel, SS coupling, blank cap, chain, twist
release type lug & all accessories. Conforming to IS:5290. (type A)
Including fixing with anchor fastner and flanged tapping from wet riser
and providing pressure gauge with gun metal ball valve complete as
required.
474 Providing, fixing testing and commissioning of UL listed 63 mm dia 15 m 12.000 Each
long non-percolating flexible hose (RRL- type A) as per IS : 636. Type
"A" with Stainless steel male & female instantaneous type coupling (IS
903) bound and riveted to hose pipe with copper rivets and 1.5 mm
copper wire.
475 Providing, fixing testing and commissioning of Standard Stainless steel 6.000 Each
branch pipe with nozzle of 20 mm nominal bore outlet as per IS:903
suitable to fit with standard instantaneous type 63mm dia coupling ISI
marked (IS:903) complete.
476 Providing and plaacing of Stainless steel Standard Fireman's Axe with 1.000 Each
heavy insulated handle. Tested to 11 KV ISI marked.
477 Providing, fixing testing and commissioning of Weather proof standard 6.000 Each
fire hose cabinet (750 mm x 600 mm x 250 mm deep) for yard hydrants
made of 16 SWG powder coated M.S. sheet having single or double
opening glazed (4.0 mm thick glass) shutter including necessary locking
arrangement by allan key, stove enamelled Fire red finish (as per IS : 5,
shade no. 536) with " Fire Hose" marked on front, suitable for housing 2
nos. Hose pipe, 1 No. branch pipe & nozzle spanner. Cost shall inclusive
of break glass box containing key for the cabinet along with axe
hammer.

washers complete for following sizes :- [PN 10 rating (10 kg/cm2
pressure rating)].
479 150 mm dia 3.000 Each
480 100 mm dia 1.000 Each
481 80 mm dia 6.000 Each
482 Supply, installation, testing and commissioning of S.S four way fire 1.000 Each
brigade inlet to external hydrant ring /internal hydrant & sprinkler
riser/Header with 63 mm dia instantaneous type inlet and 150 mm dia
flanges outlet conforming to IS:904 with blank cap and chain including
150 mm dia C.I butterfly valve (PN 10 rating) and wafter type non-return
valve complete with nuts, bolts, flanges and complete in all respect. Cost
shall include a wall mounted box of M.S. construction (16 SWG) with
glass door (4.0 mm thick) to house the above mentioned component.
483 S.S Metal Two way fire brigade suction hose coupling of (gunmetal draw 1.000 Each
out connection) with 100 mm dia M.S. 'C’ Class suction pipe with 100
mm dia C.I. foot valve (2 No.). (Pipe max. 10 m long). Cost shall include
a wall mounted box of M.S. construction (16 SWG) with glass door (4.0
mm thick) to house the above mentioned component to be connected to
static water tank.
484 S.S Metal fire brigade suction hose coupling of (gunmetal draw in 1.000 Each
connection) with 100 mm dia M.S. 'C’ Class pipe (Pipe max. 10 m
long). Cost shall include a wall mounted box of M.S. construction (16
SWG) with glass door (4.0 mm thick) to house the above mentioned
component to be connected at main fire header pipe in fire plant room
and external ring main.)
485 Providing and laying light duty non pressure NP-3 Class RCC pipe S/S 20.000 RM
jointed with stiff mixture in the proportion 1:2, 300 mm dia R.C.C. Hume
pipe for underground hydrant pipe at road crossings including collar
pieces and filling inside of pipe with sand complete as required including
necessary excavations and back filling and bed concrete. (For road
crossing)
486 Bourden type Stainless Steel dial type pressure gauge with brass 6.000 Each
isolation valve and pipe. (For each External Fire hose cabinet +
tarrace ); Dial Diameter : 150 mm; Caliberation : 0-25
Kg/cm2
487 Constructing brick masonry chamber with 75 class designation brick 1.000 Each
work in cement mortar 1:5 (1 cement :5 fine sand) for Butterfly
valve/Sluice valve, with FRP medium duty manhole cover fixed in
concrete slab 1:2:4 mix (1 cement :2 coarse sand :4 graded stone
aggregate 20 mm nominal size), necessary excavation, foundation
concrete 1:5:10 (1 cement :5 fine sand :10 graded stone aggregate 40
mm nominal size) and 12 mm thick inside plastering with cement mortar
1:3 (1 cement :3 coarse sand) finished with a floating coat of neat
cement complete as per standard design - 1200 x 1200 x 1500 mm
internal dimensions
488 Providing and fixing M.S. structural work fabricated from standard 400.000 Kg
good walls (For structural work other than pipe supports).
489 SPRINKLER SYSTEM

490 Supply, laying, testing & commissioning of 'C' class heavy duty M.S. pipe
conforming to IS 1239 including grooved/threading, jointing with all
For M.S. pipes upto and 50 dia shall be used forged fittings with
threaded joint, above 50 mm shall be done with welded joint. Steel
structural supports are included in this items. Pipe sleeve of suitable
higher size shall be provided wherever the pipes are crossing the wall/
floors/sealing, the sleeves with glass wool in between and minimum 2
Hrs rated firestop sealant compound at either end, age tested to dafStb
guidelines complete as per project manager's requirement or
manufacturers reccomendation.
491 150 mm dia 1.000 RM

492 100 mm dia 5.000 RM
493 80mm dia 5.000 RM
494 65mm dia 10.000 RM
495 50mmdia 80.000 RM
496 40mmdia 20.000 RM
497 32mm dia 20.000 RM
498 25mm dia 125.000 RM
499 Providing, fixing, testing and commissioning of 100 mm dia Cast 1.000 Set
Iron/Ductile installation control valve assembly (test pressure should not
be less than 10.0 Kg/Sq.cm) with flanges, nut, bolts & gasket complete
with pad locking arrangement, vertical wet alarm valve with hydraulic
alarm motor & gong, 2 nos. pressure gauges as per manufacturer
recommendation with ball valves, 15 mm dia test valves, 50 mm dia
drain valve with all necessary accessories.
500 Providing, fixing, testing and commissioning of 150 mm dia Bourden 1.000 Each
type, Stainless Steel dial type pressure gauges for sprinkler system
including ball valve and pipe having caliberation of 0-10Kg/cm2.
501 Providing, fixing, testing and commissioning of Quick Response 15 mm
dia quartzoid bulb type Stainless steel sprinkler head All sprinklers shall
be chrome finish / powder coated except for conceled. The conceled
sprinkler shall be brass finish. The cover plate of concealed sprinkler
shall be factory painted at manufacturers work and the shade be
conformed prior to application on the cover plate. The sprinkler shall be
either pendent or upright type/side wall and shall not be universal style.
Contractor shall ensure provision of sprinkler guard at no additional cost.
All pendent sprinkler will be provided with rossette plate
502 Concealed Sprinkler 680C (K=80) 1.000 Each

503 Upright / Pendent Sprinkler 680C (K=80) 50.000 Each
504 Side wall Sprinkler 680C (K=80) 1.000 Each
505 Supply, installation, testing & commissioning of UL listed/FM approved
Sprinkler SS braided Flexible Joint of 25mm diameter, consisting of -
Flexible Tube (SS 304), S.S. Slip nut, Isolated Ring & O Ring - for
Sprinklers Drop, which shall include necessary supports with a
maximum working pressure of 14kgf/cm2 and temperature rating of
225oF. The length of Flexible Sprinklers Pipe shall be:
506 1000mm 10.000 Nos.

507 1200mm 10.000 Nos.
508 1500mm 5.000 Nos.
509 Providing, fixing, testing & commissioning of C.I Butterfly valve 1.000 Each
washers complete for following sizes :- [PN 10 rating kg/cm2 pressure
rating)] of 100 mm dia
510 Providing & fixing cast iron single acting air valve with screwed inlet 25 1.000 Each
mm dia including Ball valve and all fitting & accessories.
511 Providing & fixing water flow detectors / switches (Vane type) for 1.000 Each
sprinkler system, shall have sensitivity in the range of 4 to 10 US gallon
per minute and static pressure rating of 450 PSI including accessories,
junction box, suitable for indoor / outdoor mounting. The detector shall
respond to water flow in the specified direction after a preset time delay
that is field adjustable, complete as required suitable for fixing on fire
pipe including connection for wiring. - on 100 mm dia line
512 Providing ,fixing , inspecting ,testing of 50 mm drain Size & 15 mm (5.6 1.000 Each
K) Testing orifice drain assembly for installation on sprinkler system, in
brass body consisting of steel singler lever ball valve for multiple test
and drain functions, inculding inlet connection of specified size , sight
glass , connections to the main header and line drain complete as per
requirement . Product shall suitable for min.10 Kg/cm2 working
pressure.
513 Providing and fixing M.S. structural work fabricated from standard 150.000 KG
good walls (Structural other than pipe support).
514 Supply and installation of 48 mm thick steel door shutter of 60 min fire 5.500 SQM
rated confirming to BS-476, Part-22 and IS:3614part-II; abricated with 2
Nos. of 1mm thick galvanisedsteel sheet Size 1200 X 2380 MM S/L Sq.
mtrs 8.568 with 202 grade SS ball bearing hinges (100x75x3 mm ) Assa
Abloy, Fire rated door closer (standard arm) Assa Abloy, 60 min fire rated
cleared wired glass (150X750X/7.3 MM), 202 grade SS back to
backdoor handle (250 mm) Assa Abloy, Dead lock with 70 mm cylender
Assa abloy complete in all respect to the satisfaction of Engiineer In-
charge.sandwitching honeycombmaterial in between. Door frame are
manufactured with 1.25 mm thick galvanised steel sheet pressed to
formdouble rivet profileof size 143x60 mm. The frame and shutterare
finished with powder coated.
515 Environment and Social Impact Management

516 Earth work( Temporary Worker shed & Creche, Dispensary)
517 CPWD SoR (Vol. 1) 2016 - Item No.2.8 Pg. 76: Earth work in excavation 71.810 CUM
by mechanical means (Hydraulic excavator)/ manual means in
foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on
plan), including dressing of sides and ramming of bottoms, lift upto 1.5m,
including getting out the excavated soil and disposal of surplus
excavated soil as directed within a lead of 50m. In all kinds of soil.
518 PCC- M10 ( Temporary Worker shed & Creche, Dispensary)

519 CPWD SoR (Vol. 1) 2016 - Item No. 4.19.1 (4.19.1.2) Pg. 91: Providing 8.340 CUM
and laying in position reay mixed plain cement concrete, using fly ash
and cement content as per approved design mix and manufactured in
fully automatic batching plant and transported to site of work in transit
mixer for all leads, having continuous agitated mixer, manufactured as
per mix design of specified grade of plain cement concrete, including
pumping of RMC from transit mixer to site of laying and curing, excluding
the cost of centering, shuttering and finishing including cost of
curing,admixtures in recommended proportions as per IS:9103 to
accelerate/retard setting of concrete, improve workability without
imparing strength and durability as per direction of the Project Manager,
sand and aggregate derived from natural sources. All works upto plinth
level M-10 grade plain cement concrete (cement content considered @
220kg/cum)
520 Brick work ( Temporary Worker shed & Creche, Dispensary)

521 CPWD SoR (Vol. 1) 2016 - Item No.6.3.1 Pg.111: Brick work with 127.710 CUM
common burnt clay machine moulded perforated bricks of class
designation 12.5 conforming to IS:2222 in superstructure above plinth
level up to floor five level in cement mortar 1:6 (1 cement: 6 coarse
sand) with FPS (non modular) bricks
522 Plastering (wall inside only) ( Temporary Worker shed & Creche,
Dispensary)
523 CPWD SoR (Vol. 2) 2016 - Item No. 13.1 (13.1.2) Pg.227: 12 mm thick 626.350 Sqm
cement plaster of mix 1:6 (1 cement: 6 fine sand)
524 Flooring( Temporary Worker shed & Creche, Dispensary)
525 CPWD SoR (Vol. 2) 2016 - Item No. 11.3.1 Pg. 191: Cement concrete 172.740 Sqm
flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)
finished with a floating coat of neat cement, including cement slurry, but
excluding the cost of nosing of steps etc. complete. 40 mm thick with 20
mm nominal size stone aggregate
526 GI sheeting Temporary Worker shed & Creche, Dispensary)

527 CPWD SoR (Vol. 1) 2016 - Item No 12.52.1 Pg.217: GI metal ceiling lay 237.380 Sqm
in plain Tegular edge global white color tiles of size 595x595 mm, and
0.5mm thick with 8mm drop; made of GI sheet having galvanizing of 100
gms/sqm (both sides inclusive) and electro statically polyster powder
coated of thickness 60 microns (minimum) including factory painted
bending
528 MS angle ( Temporary Worker shed & Creche, Dispensary)

529 HPPWD SoR (Vol. 1) 2009 - Item No. 1502060000, pg. 1657: In trusses 8.520 quintal
and trussed purlins in buildings of size 40x40x6
530 Steel plate (Sign boards)
531 HPPWD SoR (Vol. 1) 2009 - Item No. 024805030000, pg. 84: 255.000 kg
Galvanized structural steel plate 200mm wide 6 mm thick 24m long
532 Centering & Shuttering ( Temporary Worker shed & Creche, Dispensary)
533 CPWD SoR (Vol. 1) 2016 - Item No. 4.3 Pg.89: Centering and shuttering 113.350 Sqm
including strutting, propping etc and removal of formwork for
foundations, footings, bases for columns
534 Doors ( Temporary Worker shed & Creche, Dispensary)
535 CPWD SoR (Vol. 1) 2016 - Item No. 7270 Pg. 36: 30 mm thick 37.800 Sqm
prelaminated flush door shutter
536 Windows ( Temporary Worker shed & Creche, Dispensary) 27.000 Nos
537 Earth fill( Temporary Worker shed & Creche, Dispensary)
538 CPWD SoR (Vol. 1) 2016 - Item No. 2.25 Pg. 79: Filling available 87.780 CUM
excavated earth (excluding rock) in trenches, plinth, sides of foundations
etc. in layers not exceeding 20cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
539 DPC ( Temporary Worker shed & Creche, Dispensary)

540 CPWD SoR (Vol. 1) 2016 -Item No. 4.11 Pg. 90: Providing and laying 71.760 Sqm
damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2
coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).
541 Dismantling brick masonry ( Temporary Worker shed & Creche,

Dispensary)
542 CPWD SoR (Vol. 2) 2016 - Item No. 15.7 Pg. 253: Demolishing brick 127.710 cum
work manually/ by mechanical means including stacking of serviceable
material and disposal of unserviceable material within 50 metres lead as
per direction of Engineer-in-charge, in cement mortar
543 Dismantling doors and windows ( Temporary Worker shed & Creche,
Dispensary)
544 CPWD SoR (Vol. 2) 2016 - Item No. 15.12.1 Pg. 254: Dismantling 45.000 Nos
doors, windows and clerestory windows (steel or wood) shutter including
chowkhats, architrave, holdfasts etc. complete and stacking within 50
metres lead. Of area 3 sq. metres and below
545 (Sign boards)
546 CPWD- Delhi. Schedule Of Rates (Vol. 1) 2016 - Item No. 5.1.3 Pg. 97 0.620 CUM
Providing and laying in position specified grade of (RCC )reinforced
cement concrete, excluding the cost of centering, shuttering, finishing
and reinforcement - all work upto plinth level
547 Electrical items( Temporary Worker shed & Creche)
548 CPWD-DELHI (E & M) Pg-1 (1.1.1 Group-A- wiring) 2018. Wiring for 40.000 Nos.
light point/ fan point/ exhaust fan point/ call bell point / with 1.5
sq.mmFRLS PVC insulated copper conductor single core cable in
surface / recessed steelconduit, with piano type switch, phenolic
laminated sheet, suitable size MS box andearthing the point with 1.5
sq.mm. FRLS PVC insulated copper conductor single core cable etc as
required
549 Providing & fixing LED bulbs 9W with approved quality and make 40.000 Nos
including bulb holder.
550 Switch board with 5 AMP 3 pin sockets & switch control 20.000 Nos.
551 Prefabricated Mobile Toilets (Water Supply for flushing ,Cleaning &
maintenance will be in Contractor Scope)
552 Prefabricated Mobile Toilet( Economy 10 Seater Capacity, with sizes 1.000 unit
5.50m x2.70m 3.0 height from Ground. Frame, Pillars, Ladders & railing
make SS. Roof door panels are made of FRP. Unit fixed on wheels for
easy movement at Sites as per requirement.
553 HAND APPLIANCES

554 Providing and fixing Carbon-di-oxide fire extinguishers consisting of 3.000 Nos.
welded M.S cylinderical body,squeeze lever discharge valve fitted with
internal discharge tube, 30cms long ISI marked high pressure discharge
hose, discharge nozzle, suspension bracket, confirming to IS : 934
finished externally with red enamel paint and fixed to wall with
brackets with rawl plug/dash fasteners complete with internal charge.
Capacity 4.5kg. I.S.I. Marked.
555 Providing and fixing Carbon-di-oxide fire extinguishers consisting of 2.000 Nos.
welded M.S cylinderical body,squeeze lever discharge valve fitted with
internal discharge tube, 30cms long ISI marked high pressure discharge
hose, discharge nozzle, suspension bracket, confirming to IS : 934
finished externally with red enamel paint and fixed to wall with
brackets with rawl plug/dash fasteners complete with internal charge.
Capacity 9.0 Kg ISI Marked.
556 Providing and fixing ABC stored pressure dry chemical powder 3.000 Nos.
(monoammonium phosphate) Fire Extinguisher IS : 13849 latest revision
manufacturer and of CRCA sheet in welded construction, finish with
epoxy polyster powder coated complete with brass forged ball valve, gun
metal cap and nozzel, including initial filled and wall suspension bracket
(suitable for fighting in class 'A', B & 'C' that is wood, textile, flammable
liquid, electric and gases - Capacity 6 kg
557 Providing and fixing carbon-di-oxide fire extingushers trolley mounted 2.000 Nos.
with all accessories internal discharge tube, high pressure discharge
hose, discharge nozzle, suspension bracket, ISI marked as per IS:2878
finished externally with red enamel paint and fixed to wall with brackets
complete with internal charge.: Capacity 22.5 kg
558 Supplying and installing at approved location approved make fire 15.000 Nos
buckets of 24 gauge galvanized steel sheet, standard 9 liters capacity
and of round bottom shape, painted white inside and red outside and
black on the bottom, inscribed with letter "FIRE" in black and gold. Cost
shall be inclusive of providing MS stand duly painted over a coat of
primer (one stand shall be suitable for hanging 5 buckets)
559 General sign boards as per IRC standards 2012 (Make and installation) 15.000 Nos
560 Safety siren/ alarm (at admin building) 1.000 Nos

561 UN- INTERRUPTED POWER SUPPLY
562 Supply, installation of 1 KVA UPS with 15 Minutes battery Backup at 1.000 Each
load using Sealed Lead Acid Maintenance Free batteries. Battery design
life is 5-6 yrs.including with MS Racks for housing batteries, Battery
Disconnector, battery to battery inter-links, Battery to UPS cable for a
distance of 10 meters per UPS complet as required.
563 TPN ISOLATOR FOR GOODS LIFT

564 Supply, installation, testing and commissioning of Recessed 63A ,4Pole 2.000 Each
TPN isolator in powder coated, 1.6mm thick MS enclosure having
facility for incoming and outgoing cables, set of ON/OFF/Trip indicating
lamps shall be protected by control MCBs, complete with all materials
and as per site requirement.
565 DISMANTLING & DEMOLITION

566 CIVIL WORK
567 Dismantling steel work upto span of 10 Metres and a height of 5 Metres
in built up sections in angles, tees, flats and channels including all
gusset plates, bolts, nuts, beadings etc. and stacking the materials
within 20 Metres lead :
568 Extra over items No.1 for dismantling trusses, rafters, purlins etc. of 27071.270 KG
steel work for every additional span of one Metre or part thereof beyond
10 Metres
569 Dismantling tiled floors laid in mortar upto floor two level including 865.650 SQM
stacking of serviceable materials and disposal of un-serviceable
materials within 20 Metres lead (wooden/concrete joists to be measured
and paid for separately)
570 Demolition above G.L. upto floor two level including disposal of 70.920 CUM
unserviceable materials within 20 Metres lead and including cutting the
necessary reinforcement and
separating out from R.C.C./R.B. works:-
571 Dismantling doors, windows and clerestory windows, ventilators 21.000 EACH
etc. (wood or steel) shutters including chowkhats, architraves, hold fasts
and other attachments etc. complete and stacking them within 20 Metres
lead.
572 Dismantling roofing including ridges, hips, valleys, gutters etc. stacking 1420.460 SQM
the serviceable materials and disposal of un-serviceable materials within
20 Metres lead.G.I. Sheet roofing
573 Demolition of brick work above G.L. upto floor two level including 6.290 CUM
materials within 20 Metres lead
574 Demolition of stone masonry above G.L. upto floor two level including 170.570 CUM
materials within 20 Metres lead
575 Dismantling roofing including ridges, hips, valleys, gutters etc. stacking 715.170 SQM
the serviceable materials and disposal of un-serviceable materials within
20 Metres lead.
576 ELECTRICAL WORKS
577 Dismantling of Wiring for light point/ fan point/ exhaust fan point/ call bell 65.000 Point
point with 1.5 sq.mm FRLS PVC insulated copper conductor single core
cable in surface / recessed Steel Conduit , with piano type switch,
phenolic laminated sheet, suitable size M.S. box and earthing the point
with 1.5 sq.mm. FRLS PVC insulated copper conductor single core
cable etc. as required
578 Dismantling of Wiring for Piano type light plug with 2x1.5 Sq. mm. PVC 125.000 R/M
insulated heat resistant flame retardant (HRFR) and low smoke single
core (flexible) copper conductor cable in surface/recessed Steel conduit
along with 1No. 1.5 Sq.mm. HRFRLS/PVC insulated single core copper
conductor cable for earthing as required.
579 Dismantling of Wiring for Piano power plug with 2x4 Sq. mm PVC 150.000 R/M
core (flexible) copper conductor cable in surface/recessed Steel Conduit
along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper
conductor cable for earthing as required.
580 Dismantling of Wiring for circuit/sub-main with following size pve

core (flexible) copper conductor cable in surface / recessed Steel
conduit along with 1 No. HRFRLS/PVC insulated single core copper
conductor cable of same Size for earthing as
581 2x1.5 Sq mm 900.000 R/M

582 2x2.5 Sq mm 600.000 R/M
583 Dismantling of Wiring for circuit / sub-main with 4x10 Sq. mm. PVC 200.000 R/M
insulated heat resistant flame retardant (HRFR) and low smoke sirgle
core (flexible) copper conductor cable in surface / recessed Steel
conduit along with 2 No.10 Sq.mm. (4x10 + 2x10) HRFRLS/PVC
insulated single core copper
584 Diamnatling of Wiring for circuit / sub-main with 4x16 Sq. mm. PVC 250.000 R/M
insulated heat resistant flame retardant (HRFR) and low smoke sirgle
core (flexible) copper conductor cable in surface / recessed steel conduit
along with 2 No.16 Sq.mm. (4x16 + 2x16) HRFRLS/PVC insulated single
core copper
585 Dismantling of above 32 upto100 A capacity TP&N Main disconnector 14.000 Each
fuse switch unit including with ISI marked HRC fuses , Mounted along
with wooden Board etc. as required.
586 Dismantling of upto 125A capacity TP&N Main disconnector fuse switch 1.000 Each
unit including with ISI marked HRC fuses ,Mounted along with wooden
Board etc. as required.
587 Diamantling of above 20mm up to 50 mm sizes of steel /PVC conduit 1400.000 R/M
along with accessories in surface/recess.
588 Dismantling of MS box of (100mmx75mmx50mm) size with Piano type 6.000 each
Switch , phenolic laminated sheet,in recess including providing and fixing
pin 5/6 amps socket, outlet and 5/6 amps Piano type switch connections
etc. as required.
589 Dismantling of MS box of (100mmx75mmx50mm) size with Piano type 6.000 each
Switch , phenolic laminated sheet,in recess including providing and fixing
pin 5/6 amps socket, outlet and 5/6 amps Piano type switch connections
etc. as required.
590 Dimantling of ceiling rose on the existing junction box / wooden block 5.000 each
including connections etc. as required.
591 Dismantling of bakelite batten/angle holder including connections etc as 5.000 each
required:
592 Dismantling of pair 0.5 mm dia FRLS PVC insulated annealed copper 50.000 R/M
conductor, unarmored telephone cable including with existing surface/
recessed steel conduit .
593 Dismantling of earth connection from earth electrode with 6SWG GI wire 5.000 R/M
in 15mm dia GI pipe from earth electrode to Main Fuse Unit Board etc.
as required.
594 Earthing with G.I. earth plate 600 mmx600 mmx 6mm thick, including 1.000 set
accessories and providing masonry enclosure with cover plate having'
locking .arrangement and watering pipe etc. (but without charcoal or
coak and salt) complete as required
595 Dismantling of following piano type switch/ socket on the existing switch
box/ cover including connections etc. as required
596 Telephone 3.000 Each
597 Data 2.000 Each
598 Bell Push 1.000 Each
599 Dismantling of fluorescent fitting / compact fluorescent fitting of all types, 45.000 Each
complete with all accessories and tube/lamp etc. directly on ceiling/ wall,
including connections with 1.5 sq. mm FRLS PVC insulated,
600 Dismantling of Above 6qmm and upto 25 Sqmm (3.5C) aluminium or 75.000 R/M
copper conductor, PVC insulated and PVC sheathed, armoured / XLPE
power cable, working voltage 1100V grade on surface including Lug &
Glands etc.
601 Dismantling of exhaust fan upto 450mm dia sizes including with 3.000 Each
Connection and 900 mm Ceiling fan.
602 Dismantling of 3 Phase Meter along with 3 Nos.Suitable CT and 3 phase 1.000 Each
indicator lamps, internal wiring with copper flexible wire, all connections
in inside the Wooden Board and cover with MS BOX as etc.
603 Dismantling of 1Nos Run UTP 4 pair CAT 6 LAN Cable in the existing 50.000 Each
surface/ recessed Steel conduit as required.
604 Dismantling of pole/ street light standard/ strut embedded in cement 1.000 Each
concrete foundation etc. as required
605 Note: Prices quoted shall be inclusive of GST, transportation,
insurance, loading/ unloading, shifting, labour charges etc. Nothing
extra will be acceptable above the quoted rates.
Total in Figures
Quoted Rate in Words #VALUE!

kkar, District. Shimla (HP)
columns, else the bidder is liable to be rejected for this tender. Bidders are
) NUMBER # TEXT #
TOTAL AMOUNT TOTAL AMOUNT

Without Taxes in In Words
Rs. P
53 55
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE!
Please Enable Macros to View BoQ information
Q information

Boq 45775

Uploaded by

Copyright:

Available Formats

Boq 45775

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Boq 45775

Uploaded by

Copyright:

Available Formats

What is the tender for?

What is the tender for?

What are the different types of construction works mentioned?

What are the different types of construction works mentioned?

Validate Print Help Item Rate BoQ

Tender Inviting Authority: MANAGING DIRECTOR HPMC NIGAM VIHAR SHIMLA 2

Sl. Item Description Quantity Units BASIC RATE In

7 Providing and injecting chemical emulsion for preconstructional 457.000 SQM

10 Ground Floor 134.570 CUM

13 Ground Floor 3.430 CUM

16 Ground Floor 3.600 CUM

19 Ground Floor 164.780 CUM

22 Ground Floor 363.100 CUM

37 Ground Floor 28.560 SQM

40 Ground Floor 191.640 KG

43 Ground Floor 864.750 KG

46 Ground Floor 928.800 KG

49 Ground Floor 1323.660 SQM

64 Ground Floor 2.640 SQM

67 Ground Floor 11.310 SQM

70 Ground Floor 1.350 SQM

73 Ground Floor 138.950 SQM

76 Ground Floor 60.010 SQM

88 Ground Floor 1547.510 SQM

100 Ground Floor 4.000 NOS.

111 Ground Floor 1165.000 SQM

123 RETAINING WALL

157 Providing and applying 2 or more coats of tapecrete water proofing

183 25 mm 500.000 Meter

192 Single Pole Cat-A 42.000 each

199 1900 EARTHING AND LOOP EARTHING

210 Armoured Cable 6sqmm (twin core) 300.000 R/M

218 40x 300 x 40mm deep 75.000 R/M

221 600 mm width x 62.5 mm depth x 2.0 mm thickness 100.000 R/M

226 LIGHTING FIXTURES: Supply, Carriage, erection, testing and

249 NETWORKING AND VOICE SYSTEM: DATA PASSIVE COMPONENT

253 RJ 45 Connectors UTP with all accessories 8.000 Each

307 75 mm dia 5.000 RM

310 40 mm dia. 20.000 RM

321 75 mm dia 10.000 RM

326 15 mm dia 80.000 RM

329 25 mm dia 75.000 RM

339 WATER SUPPLY EXTERNAL

341 32 mm Dia 150.000 RM

346 25 mm dia 25.000 RM

352 50 mm dia 2.000 Nos.

356 25 mm dia for Domestic Water Supply Riser 1.000 Set

361 EXTERNAL SEWAGE & DRAINAGE WORKS

386 FIRE FIGHTING WORKS

395 150 mm dia G.I. Pipe 30.000 RM

410 150 mm dia 4.000 Each

414 ELECTRICAL WORKS

427 3.5C x 120 Sqmm 4.000 Nos.

447 80 mm dia 12.000 RM

456 Providing, fixing, testing & commissioning of C.I Butterfly valve

464 FIRE HYDRANT SYSTEM (EXTERNAL)

466 80 mm dia 12.000 RM

470 80 mm dia 6.000 RM