Metalcraft 4

ROLLER CATALOG
TABLE OF CONTENTS
GENERAL INFORMATION PAGE CONTENT PAGE
Tube Sizes and Material 4 5-9/16" 43
Axle Retention and Material 4 6" 43
Construction 4 6-1/2" 44
Bearing Features and Lubrication 4 8" 44
Sprocket Information 4
Groove Information 5 TAPERED ROLLERS
Load Capacity Reference 5 1" 47-49
Taper Specific Information 5-6
Customizing Rollers 6-7 STAINLESS STEEL AND
Stainless Steel Roller Information 8-9 PVC ROLLERS
Bearing Selection Guide 10 1" 52
Coatings and Sleeves 11 1.9" 53-54
Gravity Roller Quote Sheet 12 1-1/2" 55
Sprocketed Roller Quote Sheet 13 2-1/2" 56
Grooved Roller Quote Sheet 14
Tapered Roller Quote Sheet 15 SPROCKETED ROLLERS
1.9" 60
STRAIGHT ROLLERS 2" 62
1" 18 2-1/2" 63
1-1/4" 18 2-9/16" 64
1-3/8" 19-21 3-1/2" 65
1-5/8" 22 4" 67
1-3/4" 22 5" 68
1-7/8" 23
1.9" 24-26 GROOVED ROLLERS
1-1/2" pipe 27 1-3/8" 72
2" 28-29 1-7/8" 75
2-1/4" 30 1.9" 76
2-1/2" 31-33 2" 78
2-9/16" 34 2-1/2" 80
3" 35
3-1/2" 36-37 FRAMESAVER ROLLERS
4" 38-40 1-7/8" - 2" 84
4-1/4" 41
5" 42 POLY RIB ROLLERS
1.9" - 2-1/2" 88
Additional options & customs available  989.358.7000  rollers@omni.com nnnnSR-3

SR-3
Omni Metalcraft Corp. offers thousands of tube, axle, and bearing combinations for gravity and
powered applications. This Roller Catalog, which focuses on our expansive offering of standard,
pre-engineered rollers, can be used for guidance when selecting standard rollers. For custom
roller applications, please contact Omni Metalcraft’s Roller Division. We appreciate your business
and hope that you find this catalog useful.
For more information, contact one of our customer service representatives.
GENERAL INFORMATION
TUBE SIZES AND MATERIAL OPTIONS BEARING LUBRICATION
n Tube diameters range from 1" to 8" O (Oiled) – Generally used in gravity applications requiring a low
n Tube is specified by the Outer Diameter (OD) and tube coefficient of friction. Temperature range of standard oil is 0° to
wall thickness 200° F.
n Pipe is specified by the Inner Diameter (ID) and a GP (Grease Packed) – Generally used in powered applications.
schedule number that represents wall thickness Temperature range of standard grease is -10° to 225° F. Also
n Roller tubes are available in the following materials: suitable for humid applications.
- Mild (low carbon) steel Regreaseable – Same features as GP bearings, but include a
- Galvanized steel drilled inner race or an extended back closure to accept more
- Stainless steel grease through a fitting located on the end of the axle without
- Aluminum being removed from the roller. The frame thickness of the
- PVC (pipe) conveyor is required to determine regrease hole location.
- Industrial steel pipe
GENERAL SPROCKET INFORMATION
AXLE RETENTION AND MATERIAL OPTIONS (reference quote sheet drawing page 13)
n Axles up to 3/4" (dia or hex) are available with the n Sprockets available on all roller sizes with 11 gauge
spring or cotter pin retention or thicker tube wall
n Axles larger than 3/4" (dia or hex) are not available with n Standard sprockets are A-plate for 40, 50, 60 and
the spring retention 80 series chain
n Round axles 3/4" dia and larger are available with
n Other sizes and styles are available upon request
D-end retention
n Sprockets can be placed anywhere along the length of
n Axles, springs and cotter pins are available in carbon steel
the tube provided they are clear of the bearing and will
and stainless steel
not cause chain interference
n Other retention styles are available upon request
GENERAL GROOVE INFORMATION
CONSTRUCTION (reference quote sheet drawing page 14)
Crimped / Swaged – Tube material is formed down over the
bearing to hold it in place. Bearings installed in this manner are n Grooves available on 1-3/8", 1-5/8", 1-7/8", 1.9", 2"
non-replaceable. and 2-1/2" OD rollers
Counter Bored / Press Fit – Tube is counter bored to the n 5/16" narrow grooves are made for 3/16" dia belt. Narrow
correct inside diameter for the bearing to be press fit. Bearings grooves can be placed as close as 5/8" from center of
installed in this manner are replaceable. groove to center of groove.
BEARING FEATURES n 1/2" wide grooves are made for 1/4" dia belt. Wide
(reference Bearing Selection Guide page 10) grooves can be placed as close as 1" from center of
Seals – Keep contaminants out while helping retain grease groove to center of groove.
within the bearing. Seals are made of Teflon®, felt, rubber,
n Grooves can be placed anywhere along the length of the
nylon and Mylar® depending on the bearing type.
tube provided they are clear of the bearing and are set at
Shields – Keep contaminants out. Can be used in conjunction least to the minimum centers noted above.
with a seal. Generally made of steel.
Labyrinth Seals – A series of interlocking passageways in the
bearing housing to help prevent leakage.
Ball Retainer – Holds ball bearings evenly spaced. Makes for a
quieter bearing and improves bearing life.
Set-Screws – Locks the inner race onto the axle.
Flanged – Flanges are located on the outer race of the bearing.
Flanges create a fixed bearing extension from the end of the
tube. Flanged bearings cannot be recessed into tubes.
Unflanged – Bearings that have a cylindrical body that can be
pressed completely into a tube if needed.
4-SRnnnn Additional options & customs available  989.358.7000  rollers@omni.com

CONVEYOR ROLLER SELECTION FOR A GIVEN LOAD
Consider only 2/3 of the rollers under the product when calculating
required roller capacity because conveying surfaces are not
typically perfectly flat.
Maximum Product
Roller Diameter and Axle
Weight (lbs)
Example Equation
1" OD - 5 /16 hex 300
1 3/8" OD - 5/16 hex 600 300 lbs. capacity roller x 3 rollers = 900 lbs.
1.9" OD - 7/16 hex 1,500
2-1/2" OD - 11/16 hex 3,500 900 lbs. x 2/3 Rule = 600 lbs. load capacity per 3 rollers
3-1/2" OD - 1-1/16 hex 6,000
3-1/2" OD - 1-7/16 dia 10,000
4" OD - 1-7/16 dia 15,000
5" OD - 1-11/16 dia 25,000
The above guidelines assume "0" shock load and are not
applicable for 3 or more lanes. When calculating load
capacity for rollers in fork lift loading areas, Omni Metalcraft
Corp. recommends tripling the required roller capacity due to
shock loading.
TAPER SPECIFIC INFORMATION

Omni has a line of pre-engineered tapered rollers to meet your curve. This helps to maintain product orientation around a curve.
conveyor curve application needs. This section is specifically Our standard rollers are designed for industry standard inside
devoted to information unique to tapered rollers. radius dimensions. Custom tapered rollers can be made to work
Tapered rollers are used in gravity or powered conveyor turns. with custom inside radius dimensions.
Tapered rollers are designed to match the inside radius of the
Center of Center of
Curve Curve
n If the taper rate is not true for n If the taper rate is true it increases the
a given curve then the product will likelihood of maintaining leading edge
become skewed around the curve. product orientation through the curve.

TAPER SPECIFIC INFORMATION (CONTINUED)
TAPER ROLLER TUBE SIZES AND MATERIAL OPTIONS Heat Treat – All heavy-wall rollers (11 Ga and thicker) are
available with a hardened tube surface. This provides extra
n Two standard taper tube sizes both available in mild
resistance to surface wear and dents. Omni has two
steel and galvanized steel
different heat treat standards. They are dependent on the
n 1-1/2" OD to 1" OD x 18 Ga wall with a flat section at length of the roller.
the large end (1/2" to 4-1/2" of flat depending on BF)
n Rollers up to 60" will be to a Rockwell C 58-62 Hardness
n 2-1/2" OD to 1-11/16" OD x 14 Ga wall with a flat with a Case Depth of .018"-.022"
section at the large end (1/2" to 8-11/16" of flat n Rollers 60" to 84" will be to a minimum of Rockwell C 40
depending on BF) Hardness with a Case Depth of .035"
TAPER ROLLER AXLE RETENTION AND n Special heat treat specifications may be available
MATERIAL OPTIONS
FINISHES
n 1-1/2" OD to 1" OD tapers are standard with
5/16" hex axles n Zinc Plating – All mild steel roller tubes and axles are
available in one of our two standard zinc plating colors;
n All larger tapers are standard with 7/16" hex axles gold or silver/clear. Zinc plating is a highly corrosion
n All tapers are available in spring or cotter pin retention resistant finish with aesthetic appeal. Other types of
material plating may be available.
n Other retention styles and axle sizes are
available upon request n Powder Coat – A paint application process where a
powder material is applied to the surface of the roller
TAPER ROLLER SPROCKET INFORMATION using an electrostatic charge. The applied powder is
(reference quote sheet drawing page 11) then heat cured to form a smooth, very durable finish.
n Sprockets available standard on 2-1/2" OD to Available in a clear coat or any of Omni’s color options.
1-11/16" OD tapers n Sand Blasting – Can be used to give a matte/non-
n Standard sprockets are A-plate for 40 and reflective finish to the tube
50 series chain SPECIAL ODS (STRAIGHT ROLLERS)
n Sprockets are placed on the large OD end as a standard. n Standard press fit bearings can be used with
Sprockets can be placed anywhere along the length special OD tubes
of the tube provided they are clear of the bearing and
will not cause chain interference. n Bearings can be press fit directly into the tube if the
tube wall is of sufficient thickness
TAPER ROLLER GROOVE INFORMATION
(reference quote sheet drawing page 11) n If the bearings do not fit directly into the tube a boss
can be used
n Narrow grooves are available on 1-1/2" OD to 1" OD
and 2-1/2" OD to 1-11/16" OD tapers n Neither design option can be used with crimp
style bearings
n Wide grooves are only available on 2-1/2" OD to
1-11/16" OD tapers SPECIAL ODS (TAPER ROLLERS)
Special large end and/or small end ODs can be manufactured
n Grooves can only be placed on the tapered section of upon request depending on the roller construction.
the roller provided they are clear of the bearing and are n Tapers can start as large as 5" OD and go down to 1" OD
no more than 3-3/4" inches from the end of the tube
n Special tapers can be manufactured as true tapers
CUSTOMIZING ROLLERS to fit most radii
Flanges – Flanges can be welded to the tube to guide the n Special tapers can be made with no flat on the large end
product. Standard flanges are available for 1.9", 2-1/2",
2-9/16" and 3-1/2" OD rollers. Other sizes may be n Some special tapers are available with grooves.
available upon request. This is determined based on the size and length
of the taper tube.
Center Support Puck – Center support pucks can be
installed in a roller to provide extra roller capacity at longer WELD-OVER TAPER SHELL
lengths. Pucks are available for most axles 11/16" hex These tapered tubes are designed to fit over a straight roller and
and smaller. be welded in place. It is recommended that the small end of the
taper is a minimum of 1/4" larger than the straight roller OD
Ultrex Sleeves – Loose fitting Ultrex sleeves installed over
sprocketed rollers are designed to be able to spin on the AXLE MACHINING
roller surface for low pressure accumulation applications. Omni can provide optional axle retention/machining. Page 7 are
some of the axle machining options that are available.
Boss – Steel plate designed to fit in the ID of the tube. (enlarged to show detail)
As a standard, these plates are recessed into the tube and
welded in place. The plate is designed to fit the
corresponding bearing or to be welded directly to the axle.

AXLE MACHINING OPTIONS
Drill and Tap (Female Thread) Threaded (Male Thread)
Milled Flat Milled Slot
Snap Ring Groove Turn Down
SPECIAL TUBE CONSTRUCTION

Omni can provide special tube construction for many different
applications. Below are some of the different tube construction
options that are available.
Concave Roller Sprocketed Hub
Bow-Tie Roller V-Groove Hub
Trapezoidal Crown Flanges

STAINLESS STEEL ROLLER INFORMATION
Premium Class (P-Class)
P-class rollers are made from all stainless steel components and are intended for use in
frequent washdown, high corrosive and food processing applications.
n Manufactured with 304 stainless steel, mill finish materials (unless otherwise noted)
n Stainless steel or polymer roller bearings
n Washdown rated
n Stainless steel sprockets and fasteners
n FDA/USDA approved materials
n Continuous MIG welds
n Rollers with thru-bore bearings are NOT water-tight; liquid may become trapped inside
Additional Options
- Polished stainless steel finishes
- 316 stainless steel materials
- Special "water-tight" roller designs utilizing blind bore bushings
Deluxe (D-Class)
D-class rollers are made of combinations of corrosion-resistant material and carbon steel
materials. They are intended for use in occasional washdown and low corrosive applications.
n Standard roller designs (zinc plated, galvanized, PVC, stainless steel or aluminum tubing)
n General purpose roller bearings
n General purpose sprockets and chain
n Zinc plated fasteners
n Rollers with thru-bore bearings are NOT water-tight; liquid may become trapped inside
Surface Finishes Available

Mill Finish – Mill Finish also known as unpolished finish is the standard finish for rollers unless
otherwise requested by the customer. A mill finish is a bright, smooth, semi-reflective and non-
directional finish. Exact visual appearance can vary based on different grades and thicknesses
of stainless steel. Pitting, scratches, welds and tool marks may be visible on the surface. These
blemishes cannot be blended to recreate an original mill finish appearance. These areas will
remain blemished unless additional surface finishing operations are performed.
Glass Bead Blasted Finish – Glass bead blasting produces a bright uniform matte or frosted
finish with low reflectivity and no directionality. It reduces glare from shiny stainless steel while
retaining a smooth feel. Although the surface has a consistent look it may contain pits
and scratches. The maximum surface roughness is Ra of 125 micro-inches.
Sand Blasted Finish – Sand blasting, similar to glass bead blasting, uses a more abrasive
medium. This produces a duller and less smooth finish than glass bead blasting. The surface
may contain pits and scratches.
Polished Finish – Also known as brushed or satin finish. A polished finish is the result of
additional mechanical operations which include grinding, polishing and buffing that are intended
to change the appearance and condition of stainless steel metal surfaces. The most common
stainless steel cosmetic polished finish is described as a No. 4 finish. It is a bright, uni-directional
finish with a visible "grain" which prevents mirror reflection. It is obtained by finishing with a 120-
150 mesh abrasive, following initial grinding with coarser abrasives and has a surface roughness
with a maximum Ra of 32 micro-inches. Areas where welds and tool marks were cleaned up can
be blended or repaired by using the same or similar polishing methods that were used to create
the original polished finish. Sprocketed rollers can only be polished on the effective width.

STAINLESS STEEL ROLLER INFORMATION (CONTINUED)
Bushings (Roll End Bearings)
Bushings, or Roll End Bearings, can be used in place of traditional ball bearings in rollers. In applications with speeds
less than 150 FPM they offer many advantages.
n No moving parts to break down
n No lubrication to be washed away or dry out
n Equivalent load capacity to ball bearings
n Fit in any tube size or tube material
n Can be custom built for uncommon tube and axle size combinations
n Blind bore designs with stub axles for “water-tight” rollers
n Free-draining designs
n Available in a wide variety of materials
Based on the material they are made from bushings can be used in many applications.
n Sanitary and food applications
n High temperature applications (up to 550° F)
n Low temperature applications (down to -50° F)
n Excessively abrasive dust or debris applications
n Underwater applications
n Corrosive environments

BEARING SELECTION GUIDE t
r en vel
y e yo nm Le
WHY THIS BEARING? acit e ds nv es v iro ise
ap pe Co Typ En No
C S
Plastic
• Lowest capacity
• No lubrication required Light Duty Corrosive
• Capable of operating submerged in liquid Low Low Gravity High
Wet
• Not for use with high speeds or powered conveyor Conveyor
• Ideal for washdown with harsh detergents
• Molded plastic bodies and stainless steel balls
Unground Crimped (Non-Precision)

• Most cost effective
• Lowest coefficient of friction, easiest to turn Gravity and
• Zinc plated for mild corrosion resistance Low Low Lineshaft Mild High
• Not for use with high speeds Conveyor
• Stamped metal housing with very loose tolerances
• Full complement of balls which are not separated
Unground Press Fit (Non-Precision)
• More capacity than crimped
• Can be replaced for longer roller life Gravity and
• More sealing options available Medium Medium Powered Mild High
• Zinc plated for mild corrosion resistance Conveyor
• Stamped metal housing with very loose tolerances
• Full complement of balls which are not separated
Semi-Precision
• More capacity than unground
• Capable of higher speeds than unground Heavy Duty
• Superior seals over unground Medium Medium Gravity and Dirty Medium
• Can be replaced for longer roller life High High Powered
• Machined metal housings with tighter tolerances Conveyor
• Ball retainer keeps the balls separated and evenly
spaced
Poly Housed ABEC style (Precision)
• Most common ABEC style High Speed
• Most cost effective ABEC style Medium Highest Powered Mild Low
• Highest possible speeds Conveyor
• Long service life
• Better seals than semi-precision
All Metal and Insert ABEC style (Precision)

• All metal parts
• Best seals and shields available
• Highest capacity possible Heavy Duty
• Can be replaced for longer roller life Powered
Highest High Very Dirty Low
• Insert bearings feature set-screws to lock onto axle and and Gravity
prevent side-to-side movement Conveyor
• High quality steel, heat treated to uniform hardness and
ground to a micro finish
• Tightest tolerances available
Framesaver (Precision)
• Same benefits as Poly Housed ABEC
• Uses tapered hex stub axle design High Speed
• Axle fits tightly in worn frame holes Medium High Powered Mild Lowest
• Prevents additional frame wear Conveyor
• Metal or plastic axles available
Bushings
• No moving parts to wear out

• Uncommon sizes available
• Long service life Powered
High Low All Medium
• Heavy duty capacity at slow speeds Conveyor
• High temp materials available
• Abrasion resistant material available
• Food grade materials available
*The information provided on this bearing guide is for general reference only. There are many exceptions and we encourage you to contact our qualified
staff to answer any questions you may have.
For more detailed drawings and additional bearings reference our Bearing Index.

COATINGS AND SLEEVES
Durometer Rubber Family Food Grade Family Millable Urethane Family Sleeve Family
Durometer: Cost effective, generic coating. Not Economical, replaceable and

Used for food and non-marking
Range Comparable recommended for non-marking Most durable suitable for numerous material
applications.
To applications. handling applications.*
95A Orange Millable Urethane

Harder, more resistant to cutting and tearing
(MAX TEMP = 212°F)

Most durable of all compounds
95A: Solid
Fork Lift Tires
95A Black Millable Urethane
(MAX TEMP = 212°F)
Same as above except black in color. Not
HIGHER
suitable for non-marking applications.
90A Black Aquaflex 90A Orange Millable Urethane 90A Green Urethane
90A: Phone
Cord (MAX TEMP = 275°F) (MAX TEMP = 212°F) (MAX TEMP = 185°F)
Most common black rubber compound Mid-range urethane compound Most durable sleeve option
80A Black Neoprene 80A Orange Millable Urethane 83A Orange Urethane
80A Off-White Nitrile
80A: Shoe (MAX TEMP = 250°F) (MAX TEMP = 212°F) (MAX TEMP = 185°F)
Heel (MAX TEMP = 230°F)
Meets some specific food grade Mid-range urethane compound Most common for roller coverings
Most durable food grade compound
requirements (available in red also) (available in black also)
70A Black Millable Urethane

70A Black Carboxylated Nitrile
70A: Running (MAX TEMP = 212°F)
Softer, better cushion for product protection, reduces noise
Shoe Sole (MAX TEMP = 275°F)

Softest urethane compound Common for
Most common pulley lagging
pulley laggings
65A Black Aquaflex

and more grip for driving force
(MAX TEMP = 275°F)

Most common soft black rubber
60A Gray Vinyl

60A Black Neoprene 60A Off-White Carboxylated Nitrile
LOWER
65-60A: Car (MAX TEMP = 160°F)

Tire Tread (MAX TEMP = 250°F) (MAX TEMP = 275°F)
Higher chemical resistance than
Most commonly used in glass handling Mid-range food grade compound
urethane sleeves
60A Off-White Neoprene

60A Black SBR
(MAX TEMP = 250°F)
(MAX TEMP = 220°F)
Same durometer as above but different
Softest back rubber compound
chemical resistances
40A Tan Natural Rubber

40A: Pencil
Eraser (MAX TEMP = 212°F)
Softest of all compounds
*Installation tool available. Contact one of our customer service representatives for more information.
ADDITIONAL OPTIONS AVAILABLE

TAPERED URETHANE SLEEVES
 Convert standard straight rollers into tapered rollers
GROOVES
 Multiple patterns available
PROFILES
 Concave, convex, crowned, bow-tie and tapered
Red Urethane Coated 6” Rollers Machined Bow-Tie Profile Millable

Urethane Coated Rollers

GRAVITY ROLLER QUOTATION WORKSHEET
Company: _______________________________________________________ Date:__________________________________

Contact: _______________________________ Quote Due:_______________ Desired Delivery:_________________________
Phone No.: _____________________________ Contact Email: _______________________State:_______________
Omni Sales Contact:_______________________________________________ Quote #: _______________________
Quantity: _________________ Type of Bearing: ______________

Between Frame Width (BF): _____________ Axle Size: ___________________ (Hex or Round)
Overall Cone (OAC) (if roller is not in frame): ____________ Axle Length:__________________ (or Standard)
Roller Diameter: __________________ Pin Retained:__________
Wall Thickness (Gauge): _____________ Spring Retained: ________
Tube Material/Finish: __________________ Load Capacity Required: ______________
Note: Between Frame (BF) is the distance between the frames of the conveyor. The BF measurement is needed to
ensure proper fit into the conveyor. If the roller is not in the conveyor provide the Overall Cone, the length of the roller
from bearing tip to bearing tip. (See our Roller Measurement Guide for more information) Utilize the drawing below to
depict more detailed specifications.
BF
O.A.C.
1/16 (TYP)
OD x WALL
FRAME
FRAME
AXLE
Proposal Drawing Required:  Yes  No

SPROCKETED ROLLER QUOTATION WORKSHEET
Company: _______________________________________________________ Date:__________________________________
Contact: _______________________________ Quote Due:______________ Desired Delivery:_______________________
Omni Sales Contact:______________________________________________ Quote #: _______________________
Quantity: _________________ Axle Size: ______________________(Hex or

Between Frame Width (BF): _____________ Round)
Overall Cone (OAC) (if roller is not in frame): ____________ Axle Length:_________________ (or Standard)
Roller Diameter: __________________ Pin Retained:_________
Wall Thickness (Gauge): _____________ Spring Retained: ________
Tube Material/Finish: __________________ Sprocket Size: ______________
Type of Bearing: ______________ Load Capacity Required: ______________
Note: Between Frame (BF) is the distance between the frames of the conveyor. The BF measurement is needed
to ensure proper fit into the conveyor. If the roller is not in the conveyor provide the Overall Cone, the length of
the roller from bearing tip to bearing tip. (See our Roller Measurement Guide for more information) Utilize the
drawing below to depict more detailed specifications.
BF
O.A.C.
1/16 (TYP)
OD x WALL
FRAME
FRAME
SPROCKETS
CL CL
AXLE

GROOVED ROLLER QUOTATION WORKSHEET
Company: _______________________________________________________ Date:__________________________________

Quantity: _________________ Axle Size: ___________________ (Hex or Round)

Between Frame Width (BF): _____________ Axle Length:__________________ (or Standard)
Overall Cone (OAC) (if roller is not in frame): ____________ Pin Retained:__________
Roller Diameter: __________________ Spring Retained: ________
Wall Thickness (Gauge): _____________ Groove Center Line: _____________
Tube Material/Finish: __________________ Load Capacity Required: ______________
Type of Bearing: ______________
Note: Between Frame (BF) is the distance between the frames of the conveyor. The BF measurement is needed
to ensure proper fit into the conveyor. If the roller is not in the conveyor provide the Overall Cone, the length of
the roller from bearing tip to bearing tip. (See our Roller Measurement Guide for more information) Utilize the
drawing below to depict more detailed specifications.
BF
O.A.C.
1/16 (TYP)
OD x WALL
FRAME
FRAME
CL CL
AXLE

TAPERED ROLLER QUOTATION WORKSHEET
Company: _______________________________________________________ Date:__________________________________

Quantity: _________________ Axle Size: ___________________ (Hex or Round)

Between Frame Width (BF): _____________ Axle Length:__________________ (or Standard)
Overall Cone (OAC) (if roller is not in frame): ____________ Pin Retained:__________
Roller Diameter at Small End: ____________ Spring Retained: ________
Roller Diameter at Large End: ____________ Groove Center Line: _____________ (if applicable)
Wall Thickness (Gauge): _____________ Sprocket Size: _____________(if applicable)
Tube Material/Finish: __________________ Flat Length: _____________(if applicable)
Type of Bearing: ______________ Load Capacity Required: ______________
Note: Between Frame (BF) is the distance between the frames of the conveyor. The BF measurement is needed to ensure proper fit into the
conveyor. The BF dimension allows 1/16" clearance between the extension on the bearing and the side frame at each end. If the roller is not
in the conveyor provide the Overall Cone, the length of the roller from bearing tip to bearing tip. (See our Roller Measurement Guide for more
information) Utilize the drawings below to depict more detailed specifications.
The small diameter end of a taper is meant to be installed higher in the frame than the large diameter end. The top of the tapered surface
of the tube should be horizontal. The locations of features like sprockets, grooves, tapered shells and flats should be measured from the
nearest bearing tip or OAC. Measurements should always be parallel with the axle to ensure proper location.
GRAVITY TAPER
BF
OAC
1/16" (TYP) BF
BF
OAC
1/16" (TYP) BF OAC
1/16" (TYP)
OAC
1/16" (TYP)
FLAT
POWER TAPER
FLAT
FLAT GROOVED TAPER
FLAT
CL-CL CL-CL OAC-CL
OAC-CL CL-CL
CL-CL CL-CL OAC-CL

CL-CL CL-CL OAC-CL
OAC-CL CL-CL CL-CL CL-CL OAC-CL
OAC-CL CL-CL
OAC-CL CL-CL
WELD-OVER POWER TAPER
OAC-CL CL-CL
OAC-CL CL-CL
OAC-CLOAC-CL CL-CL CL-CL

STRAIGHT ROLLERS
1" Dia x 16 Ga STRAIGHT Roller
1" Dia x 14 Ga
1-1/4" Dia x 16 Ga
Standard Specifications
1" OD x 16 Ga
Roller Part Number
Tube Bearing Bearing Bearing Bearing Part
Axle Size Style Features Spring Pin
Material Grade Assembly Protection Number
Retained Retained
1/4" Dia. 102245-O 29933 N/A
Mild Steel 5/16" Dia. 102272-O 38246 29934
Unground Press Fit Open 1 N/A 20747 20677
Galvanized 5/16" Hex 102152-O
44983 N/A
Flo-Coat
1" OD x 14 Ga
Unground Open 102245-O 1 28479
1/4" Dia. N/A
Mild Steel ABEC Press Fit Shielded 102149 (O) 2 N/A 45435
5/16" Dia. Unground Open 102272-O 1 38247 28480
1-1/4" OD x 16 Ga
Open 102043-O 43539 43538
5/16" Hex
Sealed 102046-GP 43541 43540
Mild Steel Unground Press Fit 3 N/A
3/8" Hex 102176-O 43543 43542
Open
7/16" Hex 102126-O 43545 43544
STYLE ONE STYLE TWO STYLE THREE
Load Capacity
(BF) Between Frame
BEARINGS
6 9 12 15 18 21 24 27 30 33 36 39
102245-O 60 60 59 59 59 59 51 43 37 31 25 20
102149 171 110 81 63 50 41 34 28 23 18 14 10
102272-O
60 60 59 59 59 59 59 59 58 58 58 58
102152-O
102043-O 149 149 149 149 148 137 117 101 88 77 67 58
102046-GP 149 149 149 149 140 117 100 86 75 65 57 49
102176-O 149 149 149 149 148 148 148 148 147 142 126 112
102126-O 149 149 149 149 148 148 148 148 147 147 147 138

STRAIGHT Roller 1-3/8" Dia x 18 Ga
1-3/8" OD x 18 Ga
Roller Part
Tube Bearing Bearing Part Number
Axle Size Bearing Grade Bearing Protection Style Features
Material Assembly Number Spring Pin
Retained Retained
Aluminum 25898
Unground N/A 115901-O 1
1/4" Dia. 25904 N/A
N/A
Galva- ABEC Shielded 114234-O 2 42411
Crimped
nized Unground N/A 102228-O 1 26356 28740
Flo-Coat 5/16" Hex 114233-O 42373 42374
ABEC Shielded 2 N/A
114231-GP 42369 42370
STYLE ONE STYLE TWO
Load Capacity
(BF) Between Frame
BEARINGS
6 9 12 15 18 21 24 27 30 33 36 39
115901-O 94 93 74 58 47 39 32 27 23 19 15 12
114234-O 142 114 83 65 53 44 37 31 26 22 18 14
102228-O
120 119 119 119 119 119 107 92 80 70 61 53
102228-GP
114233-O
295 294 252 198 162 136 117 101 88 77 67 58
114231-GP

1-3/8" Dia x 16 Ga STRAIGHT Roller
1-3/8" OD x 16 Ga
Roller Part Number
Retained Retained
1/4" Dia. 115901-O 27829 N/A

1/4" Hex 102178-O 39622 28481
Unground Crimped Open 1
5/16" Dia. 102241-O 37819 28482
102228-O 11439 28468
Mild Steel
Sealed and Shield-
5/16" Hex Semi-Precision Press Fit 102274-O 2 38113 41511
ed
ABEC Crimped Shielded 114231-GP 3 N/A 41509 41510
7/16" Hex Unground Open 110528-O 4 37974 37975
1/4" Dia. Press Fit 111692-O 40124
Semi-Precision Sealed and Shielded 2
Galvanized 102274-GP 44845 N/A
Flo-Coat 5/16" Hex 114233-O 42387 42388
ABEC Crimped Shielded 3
114231-GP 42383 42384
STYLE ONE STYLE TWO STYLE THREE STYLE FOUR
Load Capacity
(BF) Between Frame
BEARINGS
6 9 12 15 18 21 24 27 30 33 36 39
111692-O 129 82 59 46 36 29 24 19 15 12
102178-O 94 93 80 62 50 42 35 29 25 20 17 13
102241-O 94 93 93 93 93 86 73 63 54 47 40 34
102228-O 120 119 119 119 119 118 106 92 80 69 60 52
102274-O
288 251 184 144 117 98 83 71 61 52 44 37
102274-GP
114233-O
295 294 252 198 162 136 116 100 87 76 66 57
114231-GP
110528-O 395 395 395 394 394 394 341 299 264 235 210 186

STRAIGHT Roller 1-3/8" OD x 3/16"
1-3/8" OD x 3/16" Wall

Roller Part Number
Retained Retained
Open 102043-O 28485 28486
Unground 1
Sealed 102046-GP 22708 28487
Press Fit
Semi- 113365-O 45129 45128
5/16" Hex Sealed and Shielded 2
Precision 113365-GP 45131 45130
114233-O 42401 42402
Mild Steel ABEC Crimped Shielded 3 N/A
114231-GP 42397 42398
3/8" Dia. 102173-GP 38186 28488
3/8" Hex 102176-O 38188 28489
Unground Press Fit Open 1
7/16" Hex 102126-O 24934 24935
1/2" Dia. 102172-GP 37948 28490
Load Capacity
(BF) Between Frame
BEARINGS
6 9 12 15 18 21 24 27 30 33 36 39 42 45 48
102043-O 149 148 148 147 147 135 115 98 85 73 63 53 45 37 29
102046-GP 149 148 148 147 138 115 98 83 72 61 52 44 37 30 23
113365-O
287 249 182 142 115 95 80 67 57 48 40 32 25 19 12
113365-GP
114233-O
294 293 250 196 160 134 113 97 84 72 62 53 44 36 29
114231-GP
102173-GP 149 148 148 147 146 146 145 145 144 144 143 134 117 102 87
102176-O 149 148 148 147 147 146 145 145 144 138 122 107 94 82 62
102126-O 149 148 148 147 147 146 145 145 144 144 143 142 142 138 104
102172-GP 149 148 148 147 146 146 145 145 144 144 143 142 142 141 141

1-5/8" OD x 14 Ga STRAIGHT Roller
1-3/4" OD x 10 Ga
1-5/8" OD x 14 Ga
Roller Part Number
Retained Retained
5/16" Hex 102145-O 29893 30257

3/8" Hex Open 102180-O 38187 29894
Unground Press Fit 1
102052-O 29895 30258
Mild Steel N/A
7/16" Hex Sealed 102053-GP 40073 40072
ABEC Crimped Shielded 114235-GP 2 42647 42648
1/2" Dia. Unground Press Fit Open 102181-O 1 37947 29896
1-3/4" OD x 10 Ga
5/16" Hex 102145-O 40075 40074
3/8" Hex Open 102180-O 40077 40076
Unground Press Fit 1
102052-O 28510 28511
Mild Steel N/A
7/16" Hex Sealed 102053-GP 28534 28535
ABEC Crimped Shielded 114235-GP 2 43211 43210
1/2" Dia. Unground Press Fit Open 102181-O 1 40079 40078
STYLE ONE STYLE TWO
Load Capacity
(BF) Between Frame
BEARINGS
6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 60 63 66 69 72 75 78
102145-O 228 226 196 153 124 103 87 75 64 55 47 39 32 26 20
102180-O 289 288 288 287 263 221 189 164 143 126 111 97 85 74 63 54 44 35 27 18
102052-O
289 288 288 287 287 286 286 285 276 245 218 195 174 156 138 122 107 93 80 66 54 41 29
102053-GP
114235-GP 524 523 521 506 414 349 301 262 231 205 182 163 145 129 115 101 89 77 65 54 43 33 22
102181-O 289 288 288 287 287 286 286 285 284 284 283 280 252 227 204 183 163 145 127 110 94 78 62 47 32

STRAIGHT Roller 1-7/8" OD x 13 Ga
1-7/8" OD x 13 Ga
Roller Part Number
Retained Retained
1/4" Dia. 102188-O 28502

5/16" Dia. 102259-O 38184 28503
5/16" Hex 102248-O 40082 40081
Open
3/8" Dia. Unground Crimped 102293-O 1 37972 40083
3/8" Hex 102292-O 40085 40084
115899-O 17438 17439
Mild Steel N/A
Sealed 102279-O 37979 37980
114208-O 42255 42254
7/16" Hex Shielded
Crimped 114135-GP 2 42251 42250
ABEC
Sealed 114209-GP 42253 42252
Press Fit Sealed and Shielded 114621-GP 3 43501 43502
1/2" Dia. Unground Crimped Open 102255-O 1 40087 40086
Load Capacity
(BF) BETWEEN FRAME
BEARINGS
6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 60 63 66 69 72 75 78 81
102188-O 167 132 96 75 60 49 41 34 28 22 18 13
102259-O 269 269 223 175 143 119 101 87 75 64 55 46 39 31 25
102248-O 269 269 268 215 176 147 126 108 93 81 70 60 51 42 34
102293-O 269 269 268 268 267 254 218 189 165 145 128 112 98 85 73 62 51 40 30 20
102292-O 269 269 268 268 267 267 266 234 205 181 160 142 125 110 95 82 69 57 45 34
115899-O
115899-GP 269 269 268 268 267 267 266 266 266 265 265 264 251 225 201 179 158 138 120 101 84 67 50 33
102279-O
114621-GP 681 680 618 485 398 335 288 250 220 194 171 152 134 117 102 88 75 62 49 37
102255-O 269 269 268 268 267 267 266 266 266 265 265 264 264 263 263 262 237 211 187 163 140 118 97 76 55 34

1.9" OD x 16 Ga STRAIGHT Roller
1.9" OD x 16 Ga
Roller Part
Retained Retained
1/4" Dia. 102188-O 28491

5/16" Dia. 102259-O 41530 41529
5/16" Hex 102248-O 28494 28495
Open
3/8" Dia. Unground 102293-O 1 37973 30502
3/8" Hex 102292-O 38185 28497
Mild Steel 115899-O 23616 24877
Sealed 102279-O 37977 37978
7/16" Hex 114208-O 42199 42198
Shielded
ABEC 114135-GP 2 42070 42069
Sealed 114209-GP 42197 42196
1/2" Dia. Crimped 102255-O N/A 37818 28429
Unground Open 115899-O 1 45072 41528
115899-GP 26157 45071
114208-O 42203 42202
7/16" Hex Shielded
Galvanized 114135-GP 2 42072 42071
ABEC
114209-GP 42201 42200
Sealed
116028-GP 3 45378 45379
1/2" Dia. 102255-O 45030
Unground Open 1
115899-GP 45369
Galvanized N/A
7/16" Hex Shielded 114135-GP 45370
Flo-Coat ABEC 2
Sealed 114209-GP 45416
Load Capacity
(BF) BETWEEN FRAME
BEARINGS
6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 60 63 66 69 72 75 78 81
102188-O 167 133 97 75 61 50 42 35 29 24 19 15
102259-O 269 269 224 176 144 120 102 88 76 66 56 48 41 33 27
102248-O 269 269 269 216 177 148 127 109 95 82 72 62 53 44 37
102293-O 269 269 269 268 268 255 219 190 167 147 129 114 100 87 75 64 53 43 33 23
102292-O 269 269 269 268 268 268 267 235 207 183 162 143 127 112 97 84 72 60 48 36
115899-O
115899-GP 269 269 269 268 268 268 267 267 267 267 266 266 253 227 203 181 161 141 122 104 87 70 53 36
102279-O
102255-O 269 269 269 268 268 268 267 267 267 267 266 266 266 265 265 265 239 214 189 166 143 121 100 79 58 38
114208-O
114135-GP 501 500 498 485 398 336 289 253 223 198 177 158 142 127 113 100 89 77 67 56 46 36 27
114209-GP
116028-GP 599 599 592 466 382 322 277 241 212 187 166 147 130 115 100 87 74 62 50 38 27 16

STRAIGHT Roller 1.9" OD x 12 Ga
1.9" OD x 12 Ga
Roller Part
Retained Retained
Unground 115899-GP 1 44540 44541
Mild Steel 7/16" Hex Crimped Shielded N/A
ABEC 114135-GP 2 44896 N/A
STYLE ONE STYLE TWO
Load Capacity
(BF) Between Frame
BEARINGS
6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 60 63 66 69 72 75
115899-GP 269 269 269 268 268 268 267 267 267 267 266 266 253 227 203 181 161 141 122 104 87 70 53 36
114135-GP 501 500 498 485 398 336 289 253 223 198 177 158 142 127 113 100 89 77 67 56 46 36 27

1.9" OD x 9 Ga STRAIGHT Roller
1.9" OD x 9 Ga
Roller Part Number
Retained Retained
102051-O 11386 11379

Press Fit Labyrinth Shield 1 N/A
Unground 102051-GP 44897
N/A
Crimped Sealed 113500-GP 2 Regreaseable 42026
Semi-Precision Press Fit Sealed and Shielded 102155-GP 3 25275 25274
7/16" Hex
114208-O 42219 42218
Mild Steel Shielded
Crimped 114135-GP 4 42215 42214
Sealed 114209-GP 42217 42216
ABEC
Sealed and Shielded 114621-GP 5 43499 43500
5/8" Dia. 102187-GP 28508
Sealed 6
3/4" Dia. Press Fit 102186-GP N/A 28509
Unground Labyrinth Shield 102051-O 1 44898 39486
Semi-Precision Sealed and Shielded 102155-GP 3 45349 45350
114208-O 42225 42224
Galvanized Shielded
7/16" Hex Crimped 114135-GP 4 42221 42220
Flo-Coat
ABEC Sealed 114209-GP 42223 42222
STYLE ONE STYLE TWO STYLE THREE STYLE FOUR STYLE FIVE STYLE SIX
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 63 66 72 78 84 90
102051-O
299 297 296 295 292 231 184 146 113 83 69 55 29
102051-GP
113500-GP 602 598 473 343 264 208 166 131 101 74 61 49 25
102155-GP 565 518 331 238 181 140 108 81 57 35 25
114208-O
114135-GP 500 497 396 286 219 173 137 107 82 59 49 38
114209-GP
114621-GP 681 616 396 286 217 168 130 98 70 44 32
102187-GP 700 700 700 564 436 348 281 228 183 143 124 106 71
102186-GP 700 700 700 700 700 700 616 514 429 355 322 290 230 174 120

STRAIGHT Roller 1-1/2 Aluminum Pipe (1.9" OD)
1-1/2 Aluminum Pipe (1.9" OD)
Roller Part Number
Retained Retained
Unground Press Fit Open 102051-O 1 27369

SCH 40 114208-O 42290
Aluminum 7/16" Hex Shielded N/A N/A
(T6-6061) ABEC Crimped 114135-GP 2 42289
Sealed 114209-GP 42288
STYLE ONE STYLE TWO
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 63 66 72 78 84 90
102051-O 300 299 299 298 296 236 190 153 121 92 78 65 40
114208-O
114135-GP 501 498 398 289 223 177 143 114 90 68 58 48 28
114209-GP

2" OD x 16 Ga STRAIGHT Roller
2" OD x 14 Ga
2" OD x 11 Ga
2" OD x 16 Ga
Roller Part Number
Retained Retained
Mild Steel 7/16" Hex Unground Crimped Open 115902-O 1 N/A 27493 27492
2" OD x 14 Ga Rollers
Mild Steel 7/16" Hex Unground Press Fit Open 102040-O 2 N/A 27422 27421
2" OD x 11 Ga Rollers
Mild Steel 11/16" Hex ABEC Press Fit Shielded 112798-O 3 N/A 28515 28516
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84
115902-O 259 259 258 257 257 256 252 203 160 122 86 52
102040-O 379 378 378 340 262 208 166 133 103 77 53 30
112798-O 700 700 700 700 700 700 700 659 516 414 338 280 235 158

STRAIGHT Roller 2" x 7 Ga
2" OD x 7 Ga
Roller Part Number
Retained Retained
114208-O 42275 42274

Shielded
Crimped 114135-GP 1 42273 42272
Mild Steel 7/16" Hex ABEC N/A
Sealed 114209-GP 42271 42270
STYLE ONE STYLE TWO
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 63 66 72 78 84 90
114208-O
114135-GP 500 496 395 285 217 170 134 104 79 56 45 34
114209-GP
114621-GP 680 615 395 284 215 166 128 96 67 41

2-1/4" OD x 15/32" Wall
2-1/4" OD x 13 Ga
Roller Part Number
Retained Retained
5/16" Hex 44832-O 28519 28520

3/8" Hex Open 44834-O 38181 28521
Unground 1
102311 (O) 11502 11498
Mild Steel 7/16" Hex Crimped Sealed 102312 N/A 11517 11499
ABEC Labyrinth Shields 114734-GP 2 43638 43637
Unground Open 44836-O 1 37945 28512
1/2" Dia.
ABEC Labyrinth Shields 114735-GP 2 43640 43639
2-1/4" OD x 5/32" Wall

Mild Steel 5/8" Hex Unground N/A N/A 102047-O 3 N/A 13731 13730
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 63 66 72 78 84 90
44832-O 227 196 124 87 64 47 33 20
44834-O 289 288 263 189 143 111 85 64 45 27
102311
289 288 287 286 276 218 174 139 108 80 67 54 29
102312
114734-GP 510 470 300 216 164 127 98 74 52 33 24
44836-O 289 288 287 286 285 284 252 204 163 127 110 94 63 33
114735-GP 599 598 421 305 233 183 144 113 85 60 48 36
102047-O 448 446 444 443 441 439 437 436 418 350 319 289 234 183 134 87

2-1/2" OD x 14 Ga
Roller Part Number
Retained Retained
5/16" Hex 44833-O 28522 28523

3/8" Hex Open 44835-O 38183 28524
Unground 1
102309 (O) 11519 11523
7/16" Hex 102310 11520 11524
Mild Steel Crimped Sealed N/A
ABEC 114197-GP 2 42336 42335
1/2" Dia. Unground Open 44837-O 1 38180 28525
5/8" Hex 114198-GP 42332 42331
ABEC Sealed 2
11/16" Hex 114199-GP 42328 42327
STYLE ONE STYLE TWO
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102
44833-O 227 196 124 87 64 47 33 21
44835-O 289 288 263 189 143 111 85 64 45 27
102309
289 288 287 286 276 218 175 139 108 80 54 30
102310
114197-GP 441 438 352 254 195 153 122 96 73 53 35
44837-O 289 288 287 286 285 284 252 204 164 128 94 63 33
114198-GP 599 598 597 596 595 594 572 480 405 340 283 231 183 137 93 50
114199-GP 599 598 597 596 595 594 593 592 591 523 444 373 307 246 187 131 76

2-1/2" OD x 11 Ga
Roller Part Number
Axle Size Style Features
Material Grade Assembly Protection Number Spring Pin D-End
5/16" Hex 44833-O 28526 28527

3/8" Hex Open 44835-O 38182 28528
Crimped 1
Unground 102309 (O) 11522 11525
Sealed 102310 11521 11526
7/16" Hex
Press Fit Open 102249-O 2 40398 40399
ABEC Sealed 114193-GP 3 42304 42303
Crimped N/A
44837-O 1 37944 28530
1/2" Dia. Open
Unground 102195-O 2 37943 28531
Press Fit
102130-GP 4 28532 26430
5/8" Hex Sealed
ABEC Crimped 114195-GP 3 42298 42297
Open 102054-GP 11547 11581
N/A
102055-GP 5 11548 11582
Mild Labyrinth Shield
102056-GP Regreaseable N/A 11583
Steel Unground
Press Fit Shot Guard 45404-GP 6 39620 39621
N/A
102041-GP 15678 15677
11/16" Hex 4
102229-GP Regreaseable 42027 21331
Semi-Precision Sealed 102139-GP 7 23417 23418
114196-GP 3 42294 42293
Crimped
ABEC 116029-GP 8 N/A 45380 45381
Sealed and Shielded 114128-GP 7 42050 42049
Open 102273-GP 2 29931
Unground N/A
3/4" Dia. Sealed 102194-GP 4 Regreaseable 28533
Press Fit
ABEC Sealed and Shielded 45394-GP 9 N/A N/A 45382
3/4" Hex Unground Open 102268-GP 2 N/A 42077 29935
1" Dia. ABEC Sealed and Shielded 45395-GP 9 N/A N/A 45383
STYLE ONE STYLE TWO STYLE THREE STYLE FOUR STYLE FIVE STYLE SIX
STYLE SEVEN STYLE EIGHT STYLE NINE
Load Capacity - see following page

2-1/2" OD x 11 Ga
Roller Part Number
Retained Retained
5/16" Hex 44833-O 45025

N/A
3/8" Hex Open 44835-O 45026
Crimped 1
Unground 102309 (O) 44989 44988
Sealed 102310 44991 44990
7/16" Hex
Press Fit Open 102249-GP 2 44993 44992
ABEC Sealed 114193-GP 3 42322 42321
Galvanized Crimped
1/2" Dia. Open 44837-O 1 N/A 45027
Flo-Coat Unground N/A
Press Fit 102130-GP 4 45028
5/8" Hex Sealed
ABEC Crimped 114195-GP 3 42316 42315
Open 102054-GP 5 40978 42465
11/16" Unground Press Fit
102041-GP 4 42464 42463
Hex Sealed
ABEC Crimped 114196-GP 3 42310 42309
3/4" Dia. Unground Press Fit Open 102273-GP 2 N/A 45029
Load Capacity Bearing Styles pictured

(BF) Between Frame on page 32
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 112
44833-O 227 195 123 86 62 44 30
44835-O 289 287 262 187 141 108 82 60 41 23
102309
289 287 286 284 274 216 171 135 104 76 49 24
102310
102249-O
506 503 400 289 221 173 137 107 81 58 36
102249-GP
44837-O 289 287 286 284 283 281 249 201 160 123 89 58 27
102195-O 700 700 560 407 313 249 200 160 127 97 69 43
102130-GP 700 700 700 700 700 589 486 407 341 285 235 190 148 108 70 32
102054-GP 649 647 646 644 642 641 639 638 636 635 633 579 477 383 292 205 119 35
102055-GP 649 647 646 644 643 641 640 638 636 626 531 445 366 292 222 153 87
102056-GP 649 647 646 644 643 641 640 638 636 626 531 445 366 292 22 153 87
45404-GP 700 700 700 700 700 700 678 572 485 412 347 290 237 187 139 93
102041-GP
700 700 700 700 700 700 700 612 520 441 373 311 255 201 151 102 54
102229-GP
102273-GP 700 700 700 700 700 700 700 700 700 700 599 506 421 342 267 194 124 54
102194-GP 609 607 606 604 603 601 600 598 597 588 501 423 351 284 220 159 99 41
102268-GP 700 700 700 700 700 700 700 700 700 700 700 584 493 420 361 278 196 116 52
102139-GP 700 700 700 700 700 700 700 700 700 593 489 394 305 220 137 56
114193-GP 441 437 350 252 192 150 118 92 69 49 30
114195-GP 599 597 596 594 593 591 569 477 401 336 278 226 177 130 86 42
114196-GP 599 597 596 594 593 591 590 588 587 518 439 367 301 239 180 123 68
116029-GP 700 700 700 700 615 493 402 329 268 215 167 122 79 38
114128-GP 700 700 700 700 700 700 700 700 700 593 489 393 304 219 137
45394-GP 700 700 700 700 700 700 578 481 400 331 269 213 159 108
45395-GP 700 700 700 700 700 700 700 700 700 700 700 638 537 457 392 339 278

2-9/16" OD x 7 Ga
Roller Part Number
Retained Retained
1/2" Dia. 102195-O 1 37942 29936

Open
102054-GP N/A 11436 11433
102055-GP 2 11435 11434
Labyrinth Shield
102056-GP Regreaseable 11444
11/16" Hex N/A
Unground Press Fit Shot Guard 45404-GP 3 22685
N/A
Mild Steel 102041-GP 13597 13596
4
Sealed 102229-GP Regreaseable 28537
102194-GP N/A 28538
3/4" Dia. 1
Open 102273-GP 29937
N/A
Semi-Precision Sealed 102139-GP 23419 23420
11/16" Hex Press Fit 5
ABEC Sealed and Shielded 114128-GP 42052 42051
STYLE ONE STYLE TWO STYLE THREE STYLE FOUR STYLE FIVE
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102
102195-O 713 708 558 404 310 244 195 154 120 89 61 34
102054-GP 648 646 643 641 639 636 634 632 630 627 625 569 468 372 281 192 106
102055-GP 648 646 643 641 639 637 634 632 630 619 523 436 357 282 210 141 74
102056-GP 648 646 643 641 639 637 634 632 630 619 523 436 357 282 210 141 74
45404-GP 847 845 843 840 838 811 673 566 478 404 339 281 227 176 128
102041-GP
848 846 844 841 839 837 721 606 513 434 365 302 245 191 139 89 41
102229-GP
102194-GP 608 606 604 601 599 597 594 592 590 580 492 413 341 273 209 147 87
102273-GP 848 846 843 841 839 836 834 832 813 694 590 497 412 332 256 182 111
102139-GP 2224 2222 2219 1910 1496 1214 1005 840 703 586 481 385 295 209 126
114128-GP 2799 2790 2595 1910 1496 1214 1005 840 703 586 481 385 295 209 126

STRAIGHT Roller 3" OD x 11 Ga
3" OD x 11 Ga
Roller Part Number
Material Grade Assembly Protection Number Spring Pin D-End
11/16" Unground Sealed 45150-GP 1 45258 45259

N/A
Hex 45149-GP 2 45256 45257
Mild Steel Press Fit Sealed and N/A
3/4" Dia. ABEC 45396-GP 45384
Shielded 3 N/A N/A
1" Dia. 45397-GP 45385
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108
45150-GP 848 847 845 843 841 839 723 609 516 438 369 307 250 197 146 96 48
45149-GP 2798 2789 2595 1911 1497 1215 1007 843 707 590 485 390 300 215 133
45396-GP 1906 1900 1525 1112 865 698 575 477 397 327 265 208 155 103 54
45397-GP 4081 4072 4059 3225 2529 2065 1730 1472 1264 1091 941 808 687 575 470 369 272 178

3-1/2" OD x 7 Ga
Bearing Roller Part Number

Tube Bearing Bearing Bearing
Axle Size Part Style Features
Material Grade Assembly Protection
Number
Spring Pin D-End
7/16" Hex N/A 45173-GP 45262 45263
5/8" Hex 45207-GP N/A 28540 28541
Unground 1
Sealed 31439 (GP) 13948 13947
N/A
11/16" Hex 45208-GP Regreaseable N/A 40810
ABEC Press Fit Sealed and Shielded 44881-GP 2 44882 44883
N/A
Unground N/A 45171-GP 1 45260
Mild Steel 3/4" Dia.
ABEC Sealed and Shielded 116030-GP 3 Bosses N/A 45386
3/4" Hex Unground N/A 45172-GP 1 N/A 45261 N/A
1" Dia. ABEC Sealed and Shielded 113124 (GP) Bosses N/A N/A 45387
Sealed
1-1/16" Hex Semi-Precision Press Fit 45077-GP 4 N/A 45076 N/A
ABEC Sealed and Shielded 45054-GP 45059
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 138 144
45173-GP 504 499 394 282 212 163 125 93 66 41
45207-GP 847 844 841 838 719 578 474 393 326 268 217 170 126 84 44
31439
847 844 841 838 835 831 714 599 504 424 354 291 232 177 125 74
45208-GP
44881-GP 1997 1994 1991 1906 1491 1208 998 832 695 576 470 373 282 196 111
45171-GP 847 844 841 838 834 831 828 825 804 684 580 485 399 318 241 167 95
116030-GP 1903 1896 1519 1105 857 689 564 465 383 312 249 190 136 83
45172-GP 847 844 841 838 834 831 828 825 822 818 735 624 522 428 338 252 169 88
113124 4078 4068 4053 3218 2521 2056 1719 1460 1251 1076 924 790 668 555 448 346 248 152
45053-GP 1203 1200 1197 1194 1190 1187 1184 1181 1178 1174 1171 1168 1165 1162 1158 1155 1152 1027 912 771 600 432 267 104
45077-GP 4127 4124 4121 4118 4114 3418 2875 2462 2132 1860 1629 1427 1246 1081 929 786 650 519 392 268 146
45054-GP 4791 4780 4764 4742 4134 3385 2847 2437 2111 1841 1612 1412 1233 1070 919 777 642 513 387 264

STRAIGHT Roller 3-1/2" OD x .300 Wall
3-1/2" OD x .300" Wall
Roller Part Number
Material Grade Assembly Protection Number Pin D-End
1" Hex 102314-GP 31444

N/A
Unground 102061-GP 1 11530
Sealed 102086-GP Regreaseable 22683
1-1/16" Hex N/A 17319 N/A
Semi-Precision 102101-GP
Mild 2 Regreaseable 39631
Press Fit
Steel 114249-GP 43621
ABEC Sealed and Shielded N/A
1-1/8" Hex 27949 3 28545
Unground Sealed 102197-GP 1 Regreaseable 28546
1-3/16" Dia.
45466-GP N/A 45467
ABEC Sealed and Shielded 3 N/A
1-7/16" Dia. 24862 23238
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 138 144
102314-GP 1201 1196 1191 1186 1181 1176 1171 1165 1160 1155 1150 1145 1140 1135 1130 1090 924 766 613 464 319 175
102061-GP
1201 1196 1191 1186 1181 1176 1171 1165 1160 1155 1150 1145 1140 1135 1130 1124 1119 1093 910 733 560 391 161
102086-GP
102101-GP 4126 4120 4115 4110 4105 3408 2863 2448 2117 1843 1609 1405 1222 1056 902 757 619 486 357 231 107
114249-GP 4791 4777 4759 4736 4125 3374 2834 2423 2095 1823 1592 1389 1209 1044 891 747 611 479 351 227
27949 6985 6968 6945 6915 6878 6726 5741 5004 4432 3909 3466 3084 2748 2447 2172 1919 1682 1457 1243 1036 836 635
102197-GP 2496 2491 2485 2480 2475 2470 2465 2460 2455 2450 2444 2439 2263 2013 1785 1575 1378 1192 1015 844 678 516 356
45466-GP 6055 6050 6045 6040 6035 6029 5204 4481 3911 3445 3053 2715 2418 2151 1909 1685 1476 1278 1089 906 730 557 387
24862 7995 7990 7985 7980 7975 6823 5812 5058 4475 4009 3628 3311 3043 2682 2316 2016 1767 1559 1382 1231 1100 986 887 799

4" OD x 10 Ga STRAIGHT Roller
4" OD x 10 Ga
Roller Part Number
3/4" Dia. 116030-GP 45388

Sealed 1 Bosses NA
1" Dia. 113124 (GP) 45389
1-1/8" Hex 27956 (GP) 28548 N/A
Mild Steel ABEC Press Fit
1-3/16" Dia. Sealed and 27957 (GP) 28549
2 N/A
1-3/8" Dia. Shielded 45104-GP N/A 45112
1-7/16 Dia. 45103-GP 45111
STYLE ONE STYLE TWO
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 138 144
116030-GP 1902 1894 1518 1105 857 689 585 467 385 314 251 194 138 87
113124 4077 4067 4053 3218 2521 2057 1720 1461 1253 1078 927 793 671 559 452 351 253 158
27956 6987 6972 6951 6923 6081 5043 4305 3754 3326 2984 2705 2472 2275 2106 1959 1723 1516 1343 1196 1071 885 691 501 313
27957 6057 6054 6052 6049 6046 5079 4332 3774 3342 2997 2715 2481 2282 2112 1942 1721 1514 1318 1131 951 777 607 439 274
45104-GP
7997 7995 7992 7821 6187 5116 4358 3794 3358 3010 2726 2490 2290 2119 1970 1751 1540 1363 1213 1085 975 879 795 722
45103-GP

STRAIGHT Roller 4" OD x 1/4" Wall
4" OD x 1/4" Wall
Roller Part Number
1-1/8" Hex 45102-GP 45110 N/A

1-3/16" Dia. Sealed and 45101-GP 45109
Mild Steel ABEC Press Fit 1 N/A
1-3/8" Dia. Shielded 27955 N/A 28550
1-7/16" Dia. 24864 45106
STYLE ONE
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 138 144
45102-GP 6985 6968 6945 6915 6878 6834 5895 5080 4437 3910 3467 3085 2749 2448 2174 1920 1683 1459 1245 1038 838 642 450 260
45101-GP 6055 6050 6045 6040 6035 6030 5203 4481 3911 3445 3053 2715 2418 2152 1910 1686 1477 1279 1090 908 731 558 389 222
27955 7995 7990 7985 7980 7975 7970 6808 5926 5243 4699 4254 3884 3571 3303 3070 2727 2396 2119 1884 1683 1510 1352 1122 898
24864 7995 7990 7985 7980 7975 7970 6808 5926 5243 4699 4254 3884 3571 3303 3070 2727 2396 2119 1884 1683 1510 1360 1228 1112

4" OD x 1/2" Wall STRAIGHT Roller
4" OD x 1/2" Wall
Roller Part Number
Unground 102086-GP 1 Regreaseable 28551

1-1/16" Hex
Semi-Precision Sealed 102101-GP 2 28552 N/A
1-1/8" Hex 27949 28553
N/A
Mild Steel 1-3/8" Dia. Press Fit 27951 28554
Sealed and
ABEC 3 24875
Shielded N/A
1-7/16" Dia. 24862 N/A N/A
N/A N/A
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 138 144
102086-GP 1198 1188 1179 1170 1160 1151 1142 1132 1123 1114 1104 1095 1086 1076 1067 1057 1048 1019 832 650 473 299
102101-GP 4122 4113 4103 4094 4085 3384 2834 2415 2079 1801 1563 1355 1168 997 839 690 548 411 277
27949 6981 6961 6933 6898 6857 6809 5866 5047 4399 3868 3420 3034 2694 2388 2110 1852 1610 1382 1163 952 748 548 350
27951 7992 7983 7973 7964 7955 7945 7936 7172 6275 5547 4939 4419 3966 3564 3201 2869 2563 2276 2004 1746 1498 1257 1024 795
24862 7992 7983 7973 7964 7955 7945 7936 7927 7536 6672 5953 5340 4806 4334 3910 3523 3166 2834 2521 2223 1939 1664 1398 1101

STRAIGHT Roller 4-1/4" OD x 1/4" Wall
4-1/4" OD x 7/16" Wall
4-1/4" OD x 1/4" Wall
Roller Part Number
Mild Steel 1-3/16" Dia. ABEC Press Fit Sealed and Shielded 27957 1 N/A N/A 28555
4-1/4" OD x 7/16" Wall

1-1/4" Hex Unground Sealed 102205-GP 2 N/A 28033 N/A
Mild Steel Press Fit
1-7/16" Dia. ABEC Sealed and Shielded 24864-GP 1 N/A N/A 28556
STYLE ONE STYLE TWO
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 138 144
27957 6055 6050 6044 6039 6034 6028 5200 4478 3907 3440 3048 2710 2413 2146 1904 1680 1470 1272 1083 900 723 550 380 213
102205-GP 4493 4484 4475 4466 4457 4448 4439 4430 4421 4412 4098 3657 3272 2929 2619 2334 2070 1822 1587 1363 1146 936 731 530
24864 7992 7983 7975 7966 7957 7948 7939 7930 7539 6676 5957 5344 4811 4339 3915 3529 3173 2841 2528 2231 1947 1673 1407 1148

5" OD x 1/4" Wall STRAIGHT Roller
5" OD x 3/4" Wall
5" OD x 1/4" Wall

Roller Part Number
N/A 45083
1-7/16" Dia. 45082-GP N/A
80A20 Spkts 45084
1-1/2" Hex Sealed and 45081-GP 45086 N/A
Mild Steel ABEC Press Fit 1
Shielded N/A
1-11/16" 45087
45080-GP N/A
Dia. 80A20 Spkts 45088
5" OD x 3/4" Wall

N/A 24876
1-7/16" Dia. 24864 (GP) N/A
80A20 Spkts 38784
1-1/2" Hex Sealed and 27953 (GP) 28557 N/A
Shielded N/A
1-11/16" 26837
26838 (GP) N/A
Dia. 80A20 Spkts 41889
STYLE ONE
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 138 144
45082-GP 7994 7988 7982 7975 7969 7963 7956 7950 7557 6696 5980 5369 4839 4370 3948 3565 3211 2882 2571 2277 1995 1724 1460 1204
45081-GP 10186 10179 10173 10167 10160 10154 10148 9511 8431 7567 6861 6272 5774 5346 4975 4650 4362 4106 3831 3437 3097 2802 2543 2316
45080-GP 10186 10179 10173 10167 10160 10154 10148 9672 8558 7670 6945 6343 5834 5398 5021 4690 4398 4138 3905 3508 3159 2855 2591 2358
24864 7986 7969 7952 7935 7918 7901 7884 7867 7468 6597 5870 5249 4707 4227 3795 3401 3037 2697 2376 2071 1778 1496 1222 955
27953 10176 10159 10142 10125 10108 10091 10074 10057 10040 10023 10006 9526 8608 7798 7074 6417 5815 5256 4733 4239 3769 3319 2884 2462
26838 10176 10159 10142 10125 10108 10091 10074 10057 10040 10023 9762 8792 7954 7218 6562 5971 5430 4931 4466 4028 3613 3218 2838 2471

STRAIGHT Roller 5-9/16" OD x 3/4" Wall
6" OD x 3/8" Wall
6" OD x 3/4" Wall
5-9/16" OD x 3/4" Wall

Roller Part Number
1-1/2" Hex Sealed and 27958 (GP) 28558 N/A

Mild Steel ABEC Press Fit 1 N/A
1-11/16" Dia. Shielded 27959 (GP) N/A 28559
6" OD x 3/8" Wall

1-15/16" Dia. Sealed and 45067-GP 45069
Mild Steel ABEC Press Fit 1 N/A N/A
2-7/16" Dia. Shielded 45068-GP 45070
6" OD x 3/4" Wall

1-15/16" Dia. 27960 (GP) 28561
Sealed and 1
Mild Steel 2-7/16" Dia. ABEC Press Fit 27962 (GP) N/A N/A 28562
Shielded
2-15/16" Dia. 102203-GP 2 28563
STYLE ONE STYLE TWO
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 138 144
27958 10174 10155 10136 10116 10097 10078 10058 10039 10020 10001 9981 9497 8576 7764 7037 6378 5774 5213 4688 4192 3719 3267 2830 2406
27959 10174 10155 10136 10116 10097 10078 10058 10039 10020 10001 9735 8762 7922 7184 6526 5932 5389 4888 4421 3981 3564 3166 2784 2414
45067-GP 10919 10908 10897 10885 10874 10863 10851 10840 10829 10818 10806 10795 10784 10772 10491 9802 9195 8654 7961 7316 6710 6137 5592 5071
45068-GP 16328 16317 16305 16294 16283 16272 16260 16249 16238 16141 14606 13333 12258 11340 10545 9850 9237 8692 8204 7765 7367 7005 6664 6076
27960 10912 10891 10870 10849 10828 10807 10786 10765 10744 10723 10702 10681 10660 10639 10618 10076 9246 8486 7784 7129 6513 5931 5376 4844
27962 16321 16300 16279 16258 16237 16216 16195 16174 16153 16132 16111 16090 16069 16048 16027 16006 15219 14317 13509 12781 12121 11521 10954 9981
102203-GP 54068 54047 54026 54005 53984 45929 38968 33825 29869 26729 24176 22057 20271 18744 17423 16268 15249 14343 13533 12803 12141 11539 10988 10023

6-1/2" OD x 1" Wall STRAIGHT Roller
8" OD x 1" Wall
6-1/2" OD x 1" Wall

Roller Part Number
2-7/16" Dia. Sealed and 27962 (GP) 1 28564

Mild Steel ABEC Press Fit N/A N/A
2-15/16" Dia. Shielded 102203-GP 2 28565
8" OD x 1" Wall

2-15/16" Dia. Sealed and 27965 (GP) 1 28570
Mild Steel ABEC Press Fit N/A N/A
3-7/16" Dia. Shielded 102204-GP 2 28571
STYLE ONE STYLE TWO
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 138 144
27962 16316 16287 16257 16228 16198 16169 16140 16110 16081 16052 16022 15993 15963 15934 15905 15875 15849 15817 15787 15758 15153 14078 13067 12111
102203-GP 54063 54033 54004 53975 53945 53916 53887 48466 42798 38300 34643 31609 29051 26864 24972 23318 21859 20562 19402 18356 17410 16547 15759 15035
27965 20502 20465 20427 20390 20352 20315 20278 20240 20203 20166 20128 20091 20053 20016 19979 19941 19904 19866 19829 19792 19754 19717 19680
102204-GP 78334 78230 78101 77948 77770 77568 77341 71342 63827 57725 52670 48412 44776 41634 38889 36472 34325 32405 30677 29114 27692 26393 25200

TAPERED ROLLERS
1-1/2" OD to 1" OD x 18 Ga TAPERED Roller
1-1/2" OD to 1" OD x 18 Ga Tapered

Roller Part Number
N/A 45265
1/4" Dia. 102245-O 115934-O N/A
3 Grooves 45267
Mild Steel
N/A 28743 28744
5/16" Hex 102152-O 102175-O
3 Grooves 29836 29837
Unground Open 1
N/ 45264
1/4" Dia. 102245-O 115934-O
3 Grooves 45266
Zinc Plated N/A
N/A 40342
5/16" Hex 102152-O 102175-O
3 Grooves 40343
STYLE ONE
Load Capacity
(BF) Between Frame
BEARINGS
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
102245-O / 115934-O 79 71 64 58 53 49 45 42 39 36 33 31 29 27 25 23 22 20 19
Flat Length 1 2 3 5/8 1-5/8 2-5/8 3-5/8 1-3/8 2-3/8 3-3/8 1 2 3 4 1/2 1-1/2 2-1/2 3-1/2 4-1/2
102152-O / 102175-O 100 100 100 100 100 100 100 100 100 100 100 100 98 92 88 83 79 75 71
Flat Length 1 2 3 5/8 1-5/8 2-5/8 3-5/8 1-3/8 2-3/8 3-3/8 1 2 3 4 1/2 1-1/2 2-1/2 3-1/2 4-1/2

TAPERED Roller 2-1/2" OD to
1-11/16" OD x 14 Ga
2-1/2" OD to 1-11/16" OD x 14 Ga Tapered

Tube Axle Bearing Bearing Bearing
Part Features
Material Size Grade Assembly Protection Style Pin D-End
Number
Open 102052-O 102309 28697 28698

N/A
39044 39045
Unground 1 3 Grooves 28108 28107
Sealed 102053-GP 102310
40A22 Sprockets 38450 38448
Mild Steel
50A17 Sprockets 38449 38447
Shielded 114235-GP 114203-GP N/A 43177 43178
7/16" Hex ABEC Sealed and 2 40A22 Sprockets 43198 43199
114092-GP 114091-GP
Shielded 50A17 Sprockets 43196 43197
N/A 41817
Unground Sealed 102053-GP 102310 1 N/A
3 Grooves 41815
Zinc Plated N/A 43181 43182
ABEC Shielded 114235-GP 114203-GP 2 2 Grooves 43190 43191
3 Grooves 43186 43187
STYLE ONE STYLE TWO
Load Capacity
(BF) Between Frame
BEARINGS
13 15 17 19 21 23 25 27 29 31 33 35 37 39
102052-O / 102309
288 287 287 287 286 286 286 285 285 265 245 227 210 195
102053-GP / 102310
Flat Length 2-11/16 1/2 2-1/2 4-1/2 7/8 2-7/8 4-7/8 1-5/8 3-5/8 5-5/8 2-5/32 4-5/32 6-5/32 8-5/32
114235-GP / 114203-GP 438 375 331 296 267 242 221 203 187 172 159 147 136
Flat Length 2-15/32 3/4 2-9/32 4-9/32 21/32 2-21/32 4-21/32 1-13/32 3-13/32 5-13/32 1-15/16 3-15/16 5-15/16 7-15/16
114092-GP / 114091-GP 308 227 199 159 144 119 109 99 91 83 76
Flat Length 2-13/16 2-5/8 4-5/8 3 5 3-3/4 5-3/4 2-9/32 4-9/32 6-9/32 8-9/32

STAINLESS STEEL
AND
PVC ROLLERS
1" OD 16 Ga STAINLESS STEEL
1" Sch Pipe (1.315" OD) and PVC Roller
1-3/8" OD 16 Ga
1" OD x 16 Ga
Tube Bearing Bearing Bearing Bearing
Material Material Grade Assembly Protection Spring Pin
Number
Stainless 1/4" Dia. Mild Steel 102245-O 45289 N/A

Zinc Plated Unground Press Fit Open 1 N/A
Steel 5/16" Hex Mild Steel 102152-O 45290 N/A
1" SCH Pipe (1.315" OD)

SCH 40 5/16" Hex Stainless
Plastic Plastic Press Fit Open 114625 2 N/A 43460 43459
PVC Steel
1-3/8" OD x 16 Ga
Stainless 5/16" Hex Stainless Stainless Semi- Sealed and
Press Fit 113141-O 3 N/A 42007 42008
Steel Steel Steel Precision Shielded
Load Capacity
(BF) Between Frame
BEARINGS
6 9 12 15 18 21 24 27 30 33 36 39
102245-O 60 60 59 59 59 56 47 40 34 28 23 18
102152-O 60 60 59 59 59 59 59 59 58 58 58 58
114625 80 80 68 54 44 37 30 23 18 15 12 10
114131-O 182 181 171 133 108 90 76 65 55 47 40 33

STAINLESS STEEL 1.9" OD x 16 Ga
and PVC Roller
1.9" OD x 16 Ga
Tube Bearing Bearing Bearing Bearing
Material Material Grade Assembly Protection Spring Pin
Number
Plastic Plastic Press Fit 115178 1 44509 44510

Open
Zinc Plated 115902-GP 44476 44477
Stainless 7/16" Hex Stainless
Unground 115971-O 2 N/A 45269 45271
Steel Steel Stainless Crimped
Sealed 115971-GP 45273 45274
Steel
ABEC 114210-GP 3 45250 45249
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72
115178 137 137 136 136 135 134 134 133 132 110 75 42
115902-GP 259 259 258 257 257 256 233 186 145 109 74 42
115971-O
279 279 278 277 277 264 211 169 132 98 67 37
115971-GP
114210-GP 376 373 369 269 207 164 131 103 80 59 39 20

1.9" OD x 11 Ga STAINLESS STEEL
and PVC Roller
1.9" OD x 11 Ga
Bearing
Tube Bearing
Axle Size Grade Assembly Protection Part Style Features
Material Material Spring Pin
Number
7/16" Hex Mild Zinc Plated Unground Labyrinth Shield 102051-O 1 28781 28782
Steel Mild Steel 102155-GP 45272
44995 44994
Semi- Press Fit Sealed and
Stainless 2 40A18 Sprockets 44997 44996
Precision Shielded 110244-GP
Steel 7/16" Hex Stainless 50A15 Sprockets 44999 44998
Stainless Steel Steel 60A13 Sprockets 45001 45000
42269 42268
ABEC Crimped Sealed 114210-GP 3
45188
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72
102051-O 299 298 297 296 293 232 186 148 115 85 58 32
102155-GP 566 518 332 239 182 141 109 83 59 38
110244-GP 283 282 281 280 214 166 129 97 69 43 18
114210-GP 376 372 368 267 205 161 127 99 76 54 34

STAINLESS STEEL 1-1/2" Sch Pipe
and PVC Roller (1.9" OD)
1-1/2" PVC Pipe (1.9" OD)

Tube Bearing Bearing Bearing
Material Grade Assembly Protection Spring Pin
Number
1/4" Dia.
114275 1 45099 N/A
Stainless Steel
Plastic Press Fit Open N/A
SCH 40 PVC 7/16" Hex
114624 2 43462 43461
(White, Unlettered) Stainless Steel
28783 28784
7/16" Hex
Mild Steel Unground Press Fit Open 102051-O 3 N/A
SCH 80 PVC 44546 44547
(Grey, Lettered)
Load Capacity
(BF) Between Frame
TUBE BEARINGS
6 12 18 24 30 36 42 48 54 60
115275 80 80 54 38 27 18 11
SCH 40 PVC 114624 80 80 79 79 63 44 32 23 18 14
300 163 107 79 62 44 31 23 17 13
102051
SCH 80 PVC 300 206 135 100 79 55 39 29 22 17

2-1/2" OD x 11 Ga STAINLESS STEEL
and PVC Roller
2-1/2" OD x 11 Ga
Roller Part Number
Tube Bearing Bearing Bearing Bearing Bearing Part
Material Material Grade Assembly Protection Number Spring Pin
7/16" Hex
Stainless Stainless Steel ABEC Crimped Sealed 114238-GP 1 42415 42414
Steel N/A
Zinc Plated Unground Open 102054-GP 2 40508 40507
40510 40509
11/16" Hex
Mild Steel Semi- Sealed and 40A22 Sprockets 40512 40511
Mild Steel 112896-GP 3
Precision Shielded 50A17 Sprockets 40514 40513
Stainless
Steel 60A15 Sprockets 40516 40515
Press Fit
Unground Sealed 115970-GP 4 45268 45270
N/A
44889 44888
11/16" Hex 40A22 Sprockets 44891 44890
Stainless Stainless Steel Semi- Sealed and
114416-GP 3
Steel Precision Shielded 50A17 Sprockets 44893 44892
60A15 Sprockets 44895 44894
ABEC Crimped Sealed 114237-GP 1 N/A 42413 42412
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108
114238-GP 330 327 323 235 178 139 109 84 62 42 24
102054-GP 649 647 646 644 642 641 639 638 636 635 633 544 459 385 294 207 122 37
112896-GP 1349 1344 1300 946 736 594 490 408 340 282 231 183 139 97 56
115970-GP 849 847 846 844 843 812 674 568 480 406 341 282 228 177 128 80 34
114416-GP 699 697 696 694 692 691 612 510 425 351 285 225 168 114 61
114237-GP 599 597 596 594 593 591 590 588 563 477 401 333 270 211 154 99 45

SPROCKETED
ROLLERS
1.9" OD x 9 Ga SPROCKETED Roller
1.9" OD x 9 Ga
Tube Axle Bearing Bearing Bearing Bearing Part
Style Features Spring Pin
Material Size Grade Assembly Protection Number
40A18 Spkts 38209 38208
Labyrinth 50A15 Spkts 38211 38210
Shield
60A13 Spkts 38732 38733
Mild Steel
40A18 Spkts 39749 39748
Semi- Sealed and
7/16" Hex Press Fit 102155-GP 2 50A15 Spkts 39751 39750
Precision Shielded
60A13 Spkts 39753 39752
40A18 Spkts 44912 44911
Galvanized Labyrinth
Unground 102051-GP 1 50A15 Spkts 44914 44913
Flo-Coat Shield
60A13 Spkts 44916 44915
STYLE ONE STYLE TWO
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 63 66 72
102051-GP 299 297 296 295 292 231 184 146 113 83 69 55 29
102155-GP 565 518 331 238 181 140 108 81 57 35 25

SPROCKETED Roller 1.9" OD x 9 Ga
1.9" OD x 9 Ga
Axle Size Style Features Spring Pin D-End
40A18 Spkts 42570 42571
Shielded 114135-GP 50A15 Spkts 42574 42575
60A13 Spkts 42578 42579
Crimped 1
40A18 Spkts 42572 42573
7/16" Hex Sealed 114209-GP 50A15 Spkts 42576 42577 N/A
60A13 Spkts 42580 42581
Mild Steel
40A18 Spkts 43507 43508
Sealed and
ABEC 114621-GP 2 50A15 Spkts 43509 43510
Shielded
60A13 Spkts 43511 43512
40A18 Spkts 39757
3/4" Dia. Press Fit Sealed 102186-GP 3 50A15 Spkts N/A N/A 39758
60A13 Spkts 39759
40A18 Spkts 44918 44917
Galvanized Sealed and
7/16" Hex 114621-GP 2 50A15 Spkts 44920 44919 N/A
Flo-Coat Shielded
60A13 Spkts 44922 44921
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 63 66 72 78 84
114135-GP
500 497 396 286 219 173 137 107 82 59 49 38
114209-GP
114621-GP 681 616 396 286 217 168 130 98 70 44 32
102187-GP 700 700 700 700 700 700 616 514 429 355 322 290 230 174 120

2" OD x 7 Ga SPROCKETED Roller
2" OD x 7 Ga
Axle Bearing Bearing Bearing Bearing Part
Tube Material Style Features Spring Pin
Size Grade Assembly Protection Number
40A18 Spkts 43513 43514
7/16" Hex 114621-GP 1
Sealed and 50A15 Spkts 43515 43516
Mild Steel ABEC Press Fit
Shielded 40A18 Spkts 37821 37820
11/16" Hex 102191-GP 2
50A15 Spkts 37823 37822
STYLE ONE STYLE TWO
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 63 66 72 78 84
114621-GP 680 615 395 284 215 166 128 96 67 41
102191-GP 700 700 700 700 700 700 700 700 596 492 444 398 311 229 151

SPROCKETED Roller 2-1/2" OD x 11 Ga
2-1/2" OD x 11 Ga
Bearing Bearing Bearing Pro- Bearing Part
Tube Material Axle Size Style Features Spring Pin
Grade Assembly tection Number
40A21 Spkts 43406
40A22 Spkts 43407
Shot Guard 45404-GP 1 N/A
50A17 Spkts 43408
60A15 Spkts 43409
Unground 40A20 Spkts 45123 45122
40A21 Spkts 43626 43625
102041-GP 2 40A22 Spkts 38735 38734
50A17 Spkts 37614 27285
60A15 Spkts 37615 27284
Sealed 40A20 Spkts 45125 45124
Mild Steel
40A21 Spkts 43628 43627
Semi-
102139-GP 40A22 Spkts 42058 42057
Precision
50A17 Spkts 37617 29131
60A15 Spkts 37616 29130
11/16" Hex Press Fit
40A20 Spkts 45127 45126
40A21 Spkts 43370 43369
40A22 Spkts 42038 42037
50A17 Spkts 42040 42039
3
60A15 Spkts 42042 42041
40A21 Spkts 44924 44923
Sealed and
ABEC 114128-GP 40A22 Spkts 44926 44925
Shielded
50A17 Spkts 44928 44927
Galvanized 60A15 Spkts 44930 44929
Flo-Coat 40A21 Spkts 44932 44931
40A22 Spkts 44934 44933
50A17 Spkts 44936 44935
60A15 Spkts 44938 44937
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108
45404-GP 700 700 700 700 700 700 678 572 485 412 347 290 237 187 139 93
102041-GP 700 700 700 700 700 700 700 612 520 441 373 311 255 201 151 102 54
102139-GP 700 700 700 700 700 700 700 700 700 593 489 394 305 220 137 56
114128-GP 700 700 700 700 700 700 700 700 700 593 489 393 304 219 137

2-9/16" OD x 7 Ga SPROCKETED Roller
2-9/16" OD x 7 Ga
40A21 Spkts 43410
40A22 Spkts 43411
Shot Guard 45404-GP 1 N/A
50A17 Spkts 43412
60A15 Spkts 43413
Unground 40A21 Spkts 44909 45012
40A22 Spkts 38737 38736
102041-GP 2 50A18 Spkts 37619 27287
60A15 Spkts 37618 27286
Sealed
Mild Steel 11/16" Hex Press Fit 80A13 Spkts 38738 38739
40A22 Spkts 42060 42059
Semi-
102139-GP 50A18 Spkts 38728 38730
Precision
60A15 Spkts 38729 38731
40A21 Spkts 43374 43373
3
40A22 Spkts 42044 42043
Sealed and
ABEC 114128-GP 50A18 Spkts 42046 42045
Shielded
60A15 Spkts 42048 42047
80A13 Spkts 44910 45013
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102
45404-GP 847 845 843 840 838 811 673 566 478 404 339 281 227 176 128
102041-GP 848 846 844 841 839 837 721 606 513 434 365 302 245 191 139 89 41
102139-GP 2224 2222 2219 1910 1496 1214 1005 840 703 586 481 385 295 209 126
114128-GP 2799 2790 2595 1910 1496 1214 1005 840 703 586 481 385 295 209 126

SPROCKETED Roller 3-1/2" OD x 7 Ga
3-1/2" OD x 7 Ga
Tube Material Style Features Pin
60A20 Spkts 45056
Unground 45053-GP 1 80A16 Spkts 45057
Sealed 100A13 Spkts 45058
Semi- 60A20 Spkts 45075
Mild Steel 1-1/16" Hex Precision Press Fit 45077-GP
80A16 Spkts 45074
2 60A20 Spkts 45060
Sealed and
ABEC 45054-GP 80A16 Spkts 45061
Shielded
100A13 Spkts 45062
STYLE ONE STYLE TWO
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 138 144
45053-GP 1203 1200 1197 1194 1190 1187 1184 1181 1178 1174 1171 1168 1165 1162 1158 1155 1152 1027 912 771 600 432 267 104
45077-GP 4127 4124 4121 4118 4114 3418 2875 2462 2132 1860 1629 1427 1246 1081 929 786 650 519 392 268 146
45054-GP 4791 4780 4764 4742 4134 3385 2847 2437 2111 1841 1612 1412 1233 1070 919 777 642 513 387 264

3-1/2" OD x .300 Wall SPROCKETED Roller
3-1/2" OD x .300" Wall

Bearing Bearing Bearing Bearing Part
Tube Material Axle Size Style Features Pin D-End
Grade Assembly Protection Number
60A20 Spkts 31285
80A16 Spkts 38740
Sealed
Semi- 60A20 Spkts 30085
1-1/16" 102101-GP
Precision 80A16 Spkts 39050
Hex
2 60A20 Spkts 43363 N/A
114249-GP 80A16 Spkts 43364
Sealed and
Mild Steel ABEC Press Fit 100A13 Spkts 43365
Shielded
60A20 Spkts 40747
1-1/8" Hex 27949 3
80A16 Spkts 40749
60A20 Spkts 39258
1-3/16" Dia. Unground Sealed 102197-GP 1
80A16 Spkts 39259
N/A
Sealed and 60A20 Spkts 39261
1-7/16" Dia. ABEC 24862 3
Shielded 80A16 Spkts 39262
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 138 144
102061-GP 1201 1196 1191 1186 1181 1176 1171 1165 1160 1155 1150 1145 1140 1135 1130 1124 1119 1093 910 733 560 391
102101-GP 4126 4120 4115 4110 4105 3408 2863 2448 2117 1843 1609 1405 1222 1056 902 757 619 486 357 231
114249-GP 4791 4777 4759 4736 4125 3374 2834 2423 2095 1823 1592 1389 1209 1044 891 747 611 479 351 227
27949 6985 6968 6945 6915 6878 6726 5741 5004 4432 3909 3466 3084 2748 2447 2172 1919 1682 1457 1243 1036 836 635
102197-GP 2496 2491 2485 2480 2475 2470 2465 2460 2455 2450 2444 2439 2263 2013 1785 1575 1378 1192 1015 844 678 516 356
24862 7995 7990 7985 7980 7975 6823 5812 5058 4475 4009 3628 3311 3043 2682 2316 2016 1767 1559 1382 1231 1100 986 887 799

SPROCKETED Roller 4" OD x 1/4" Wall
4" OD x 1/2" Wall
4" OD x 1/4" Wall

Tube Material Style Features D-End

Mild Steel 1-7/16" Dia. ABEC Press Fit 24864 1
4" OD x 1/2" Wall

Mild Steel 1-7/16" Dia. ABEC Press Fit 24862 1
STYLE ONE
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 138 144
45053-GP 7995 7990 7985 7980 7975 7970 6808 5926 5243 4699 4254 3884 3571 3303 3070 2727 2396 2119 1884 1683 1510 1360 1228 1112
45077-GP 7992 7983 7973 7964 7955 7945 7936 7927 7536 6672 5953 5340 4806 4334 3910 3523 3166 2834 2521 2223 1939 1664 1398 1101

5" OD x 1/4" Wall SPROCKETED Roller
5" OD x 3/4" Wall
5" OD x 1/4" Wall

Tube Material Style Features D-End
1-7/16" Dia. Sealed and 45082-GP 80A20 Spkts 45084
1-11/16" Dia. Shielded 45080-GP 80A20 Spkts 45088
5" OD x 3/4" Wall

1-7/16" Dia. Sealed and 24864 80A20 Spkts 38784
1-11/16" Dia. Shielded 26838 80A20 Spkts 41889
STYLE ONE
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 138 144
45082-GP 7994 7988 7982 7975 7969 7963 7956 7950 7557 6696 5980 5369 4839 4370 3948 3565 3211 2882 2571 2277 1995 1724 1460 1204
45080-GP 10186 10179 10173 10167 10160 10154 10148 9672 8558 7670 6945 6343 5834 5398 5021 4690 4398 4138 3905 3508 3159 2855 2591 2358
24864 7986 7969 7952 7935 7918 7901 7884 7867 7468 6597 5870 5249 4707 4227 3795 3401 3037 2697 2376 2071 1778 1496 1222 955
26838 10176 10159 10142 10125 10108 10091 10074 10057 10040 10023 9762 8792 7954 7218 6562 5971 5430 4931 4466 4028 3613 3218 2838 2471

GROOVED
ROLLERS
1-3/8" OD x 18 Ga GROOVED Roller
1-3/8" OD x 18 Ga
1 Groove 28122 29190
Unground Open 102228-GP 1
2 Grooves 28123 29191
Galvanized Flo-Coat 5/16" Hex Crimped
1 Groove 42375 42377
ABEC Shielded 114231-GP 2
2 Grooves 42376 42378
STYLE ONE STYLE TWO
Load Capacity
(BF) Between Frame
BEARINGS
6 9 12 15 18 21 24 27 30 33 36 39
102228-GP 120 119 119 119 119 119 107 92 80 70 61 53
114231-GP 295 294 252 198 162 136 117 101 88 77 67 58

GROOVED Roller 1-3/8" OD x 16 Ga
1-3/8" OD x 16 Ga
1 Groove 29192 29194
2 Grooves 29193 29195
Mild Steel Crimped
1 Groove 42355 42353
ABEC Shielded 114231-GP 3
2 Grooves 42356 42354
5/16" Hex
Semi- Sealed and 1 Groove 38573
Press Fit 102274-GP 2 N/A
Precision Shielded 2 Grooves 38572
Galvanized Flo-Coat
1 Groove 42389 42391
ABEC Crimped Shielded 114231-GP 3
2 Grooves 42390 42392
Load Capacity
(BF) Between Frame
BEARINGS
6 9 12 15 18 21 24 27 30 33 36 39
102228-GP 120 119 119 119 119 118 106 92 80 69 60 52
102274-GP 288 251 184 144 117 98 83 71 61 52 44 37
114231-GP 295 294 252 198 162 136 116 100 87 76 66 57

1-3/8" OD x 3/16" Wall GROOVED Roller
1-3/8" OD x 3/16" Wall

1 Groove 29196 29198
Unground Sealed 102046-GP 1
2 Grooves 29197 29199
Press Fit
Semi- Sealed and 1 Groove 43766
Mild Steel 5/16" Hex 113365-GP 2 N/A
Precision Shielded 2 Grooves 43767
1 Groove 42403 42405
ABEC Crimped Shielded 114231-GP 3
2 Grooves 42404 42406
Load Capacity
(BF) Between Frame
BEARINGS
6 9 12 15 18 21 24 27 30 33 36 39 42 45 48
102046-GP 149 148 148 147 138 115 98 83 72 61 52 44 37 30 23
113365 287 249 182 142 115 95 80 67 57 48 40 32 25 19 12
114231-GP 294 293 250 196 160 134 113 97 84 72 62 53 44 36 29

GROOVED Roller 1-7/8" OD x 13" Ga
1-7/8" OD x 13 Ga
1 Groove 37345 37347
2 Grooves 37346 37348
1 Groove 42259 42258
Crimped Shielded 114135-GP
2 Grooves 42264 42263
Mild Steel 7/16" Hex 2
1 Groove 42261 42260
ABEC Sealed 114209-GP
2 Grooves 42266 42265
Sealed and 1 Groove 43519 43518
Press Fit 114621-GP 4
Shielded 2 Grooves 43521 43520
Load Capacity
(BF) Between Frame
BEARINGS
6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 60 63 66 69 72 75
115899-GP 269 269 268 268 267 267 266 266 266 265 265 264 251 225 201 179 158 138 120 101 84 67 50 33
114135-GP 501 499 498 485 397 335 288 251 222 197 175 157 140 125 111 98 86 75 64 53 43 33 23
114209-GP
114621-GP 681 680 618 485 398 335 288 250 220 194 171 152 134 117 102 88 75 62 49 37

1.9" OD x 16 Ga GROOVED Roller
1.9" OD x 16 Ga
1 Groove 28105 37343
Mild Steel
2 Grooves 28106 37344
1 Groove 37824
N/A
2 Grooves 37825
1 Groove 42075 42073
Galvanized Shielded 114135-GP
2 Grooves 42076 42074
ABEC 2
1 Groove 42206 42204
7/16" Hex Crimped Sealed 114209-GP
2 Grooves 42207 42205
1 Groove 45371
2 Grooves 45372
1 Groove 45413
Galvanized Flo-Coat Shielded 114135-GP N/A
2 Grooves 45414
ABEC 2
1 Groove 45417
Sealed 114209-GP
2 Grooves 45418
STYLE ONE STYLE TWO
Load Capacity
(BF) Between Frame
BEARINGS
6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 60 63 66 69 72 75
115899-GP 269 269 269 268 268 268 267 267 267 267 266 266 253 227 203 181 161 141 122 104 87 70 53 36
114135-GP 501 500 498 485 398 336 289 253 223 198 177 158 142 127 113 100 89 77 67 56 46 36 27
114209-GP

GROOVED Roller 1.9" OD x 9 Ga
1.9" OD x 9 Ga
1 Groove 37349 37351
Unground Labyrinth Shield 102051-GP 1
2 Grooves 37350 37352
Press Fit
Semi- 1 Groove 39861 39859
Sealed and Shielded 102155-GP 2
Precision 2 Grooves 39862 39860
1 Groove 42231 42230
Mild Steel Shielded 114135-GP
2 Grooves 42239 42238
Crimped 3
1 Groove 42233 42232
2 Grooves 42241 42240
1 Groove 43527 43526
7/16" Hex Sealed and Shielded 114621-GP 5
2 Grooves 43529 43528
Press Fit
Labyrinth 1 Groove 44884 39487
Shield 2 Grooves 44474 39488
1 Groove 42235 42234
Shielded 114135-GP
2 Grooves 42243 42242
Galvanized Flo-Coat Crimped 3
1 Groove 42237 42236
2 Grooves 42245 42244
1 Groove 43523 43522
Press Fit Sealed and Shielded 114621-GP 5
2 Grooves 43525 43524
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 63 66 72
102051-GP 299 297 296 295 292 231 184 146 113 83 69 55 29
102155-GP 565 518 331 238 181 140 108 81 57 35 25
114135-GP
500 497 396 286 219 173 137 107 82 59 49 38
114209-GP
114621-GP 681 616 396 286 217 168 130 98 70 44 32

2" OD x 16 Ga GROOVED Roller
2" OD x 16 Ga
1 Groove 37353 37355
Mild Steel 7/16" Hex Unground Crimped Open 115902-GP 1
2 Grooves 37354 37356
2" OD x 14 Ga
Axle Bearing Bearing Bearing Bearing Part Bearing
Tube Material Features Spring Pin
Size Grade Assembly Protection Number Style
1 Groove 37357 37359
Mild Steel 7/16" Hex Unground Press Fit Open 102040-GP 2
2 Grooves 37358 37360
STYLE ONE STYLE TWO
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72
115902-GP 259 259 258 257 257 256 252 203 160 122 86 52
102040-GP 379 378 378 340 262 208 166 133 103 77 53 30

GROOVED Roller 2" OD x 7 Ga
2" OD x 7 Ga
Tube Axle Bearing Bearing Bearing Part
Bearing Grade Style Features Spring Pin
Material Size Assembly Protection Number
1 Groove 42281 42280
Shielded 114135-GP
2 Grooves 42286 42285
Crimped 1
1 Groove 42279 42278
Mild Steel 7/16" Hex ABEC Sealed 114209-GP
2 Grooves 42284 42283
1 Groove 43531 43530
2 Grooves 43533 43532
STYLE ONE STYLE TWO
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 63 66 72
114135-FP
500 496 395 285 217 170 134 104 79 56 45 34
114209-GP
114621-GP 680 615 395 284 215 166 128 96 67 41

2-1/2" OD x 11 Ga GROOVED Roller
2-1/2" OD x 11 Ga
Tube Ma- Axle Bearing Bearing Bearing Part
Bearing Grade Style Features Spring Pin
terial Size Assembly Protection Number
1 Groove 37365 37367
Open 102054-GP 1
2 Grooves 37366 37368
Unground Press Fit
1 Groove 37361 37363
102041-GP 2
2 Grooves 37362 37364
Mild Steel 11/16" Hex Sealed
1 Groove 42556 42557
Crimped 114196-GP 3
2 Grooves 42558 42559
ABEC
1 Groove 42641 42642
2 Grooves 42643 42644
Load Capacity
(BF) Between Frame
BEARINGS
6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108
102054-GP 649 647 646 644 642 641 639 638 636 635 633 579 477 383 292 205 119 35
102041-GP 700 700 700 700 700 700 700 612 520 441 373 311 255 201 151 102 54
114196-GP 599 597 596 594 593 591 590 588 587 518 439 367 301 239 180 123 68
114128-GP 700 700 700 700 700 700 700 700 700 593 489 393 304 219 137

FRAMESAVER
ROLLERS
FRAMESAVER Roller
Framesaver Rollers
Tube Material Features Roller
42256
1-7/8" OD x 13 Ga
1 Groove 42262
Mild Steel
2 Grooves 42267
1.9" OD x 16 Ga
42208
Mild Steel
42210
1.9" OD x 16 Ga
1 Groove 42212
Galvanized
2 Grooves 42213
42226
1.9" OD x 9 Ga
1 Groove 42246
Mild Steel
2 Grooves 42247
42228
1.9" OD x 9 Ga
1 Groove 42248
Galvanized Flo-Coat
2 Grooves 42249
1-1/2" SCH 40
Aluminum Pipe 42291
(T6-6061, 1.9" OD)
42276
2" OD x 7 Ga
1 Groove 42282
Mild Steel
2 Grooves 42287
Load Capacity
(BF) Between Frame
TUBE
12 18 24 30 36 42 48 54 60 63 66 72 78 84 90
1-7/8" OD x 13 Ga 208 207 207 206 205 204 203 202 201 201 200 192 160
1.9" OD x 16 Ga 209 208 208 207 206 206 205 204 204 192 174 144 120
1.9" OD x 9 Ga 207 206 205 203 202 201 199 198 197 196 195 194 193 191 169
1-1/2" Pipe (1.9" OD) 209 209 208 208 207 207 206 174 139 125 113 93 78 66 56
2" OD x 7 Ga 207 205 203 202 201 200 198 196 195 193 191 189 188 186 184
Framesaver rollers feature a spring-loaded, 7/16" hex, stub

shaft. The hex stub shaft tapers from larger than 7/16" at the
base to slightly smaller at the end. The tapered shaft allows
for a tight fit into an existing frame mounting slot that might
be slightly worn. The tapered shaft, when mounted properly,
creates a tight fit and reduces the possibility of bounce and
wear of the conveyor frame. Using Framesaver rollers during
operation greatly extends the life of the conveyor frame.

POLY-RIBBED
ROLLERS
POLY-RIBBED Roller
Poly-Ribbed Rollers
Tube Material Axle Bearings Hub Features Spring Pin
115991-GP &
1.9 OD x 16 Ga Galvanized Flo-Coat 7/16" Hex Plastic Hub 45375 NA
114135-GP
114128-GP Metal Sheave 45376 45377
2-1/2" OD x 11 Ga Mild Steel 11/16" Hex 116156 & Low-Profile 45512 NA
115128-GP Metal Hub
Load Capacity
(BF) Between Frame
TUBE
12 18 24 30 36 42 48 54 60 66 72 78 84
1.9" OD x 16 Ga 598 518 378 292 232 187 150 118 89 62 37
2.5" OD x 11 Ga 700 700 700 700 700 607 504 417 343 276 214 156 100
Poly-Ribbed rollers and belts create greatly enhanced driving force compared to typical
grooved rollers with O-ring belts. They are capable of larger loads at higher speeds yet
maintain a low profile, quiet operation, and easy maintenance.
Poly-Ribbed Rollers and belts offer a much cleaner and quieter operation with greatly
reduced maintenance costs unlike the typical CDLR counter part.
Convert an existing CDLR conveyor into a Poly-Ribbed Roller Driven conveyor with ease
using our welded metal sheave manufactured to fit inside existing CDLR chain guards.
The larger diameter sheave increases surface contact on the belt, compared to the
low-profile hub, for even greater driving force.

P.O. Box 352 n Alpena, Michigan 49707
Phone 989.358.7000
Fax 989.358.7020
info@omni.com
www.omni.com

Metalcraft 4

Uploaded by

Copyright:

Available Formats

Metalcraft 4

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Metalcraft 4

Uploaded by

Copyright:

Available Formats

ROLLER CATALOG

Additional options & customs available  989.358.7000  rollers@omni.com nnnnSR-3

4-SRnnnn Additional options & customs available  989.358.7000  rollers@omni.com

TAPER SPECIFIC INFORMATION

Additional options & customs available  989.358.7000  rollers@omni.com nnnnSR-5

6-SRnnnn Additional options & customs available  989.358.7000  rollers@omni.com

Drill and Tap (Female Thread) Threaded (Male Thread)

Milled Flat Milled Slot

Snap Ring Groove Turn Down

SPECIAL TUBE CONSTRUCTION

Concave Roller Sprocketed Hub

Bow-Tie Roller V-Groove Hub

Trapezoidal Crown Flanges

Additional options & customs available  989.358.7000  rollers@omni.com nnnnSR-7

Surface Finishes Available

8-SRnnnn Additional options & customs available  989.358.7000  rollers@omni.com

Additional options & customs available  989.358.7000  rollers@omni.com nnnnSR-9

Unground Crimped (Non-Precision)

All Metal and Insert ABEC style (Precision)

• No moving parts to wear out

10-SRnnnn Additional options & customs available  989.358.7000  rollers@omni.com

Durometer: Cost effective, generic coating. Not Economical, replaceable and

95A Orange Millable Urethane

(MAX TEMP = 212°F)

suitable for non-marking applications.

70A Black Millable Urethane

Shoe Sole (MAX TEMP = 275°F)

65A Black Aquaflex

(MAX TEMP = 275°F)

60A Gray Vinyl

65-60A: Car (MAX TEMP = 160°F)

60A Off-White Neoprene

40A Tan Natural Rubber

ADDITIONAL OPTIONS AVAILABLE

Red Urethane Coated 6” Rollers Machined Bow-Tie Profile Millable

Additional options & customs available  989.358.7000  rollers@omni.com nnnnSR-11

Company: _______________________________________________________ Date:__________________________________

Quantity: _________________ Type of Bearing: ______________

Proposal Drawing Required:  Yes  No

12-SRnnnn Additional options & customs available  989.358.7000  rollers@omni.com

Quantity: _________________ Axle Size: ______________________(Hex or

Proposal Drawing Required:  Yes  No

Additional options & customs available  989.358.7000  rollers@omni.com nnnnSR-13

Company: _______________________________________________________ Date:__________________________________

Quantity: _________________ Axle Size: ___________________ (Hex or Round)

Proposal Drawing Required:  Yes  No

14-SRnnnn Additional options & customs available  989.358.7000  rollers@omni.com

Company: _______________________________________________________ Date:__________________________________

Quantity: _________________ Axle Size: ___________________ (Hex or Round)

CL-CL CL-CL OAC-CL

CL-CL CL-CL OAC-CL

Additional options & customs available  989.358.7000  rollers@omni.com nnnnSR-15

STYLE ONE STYLE TWO STYLE THREE

18-SRnnnn Additional options & customs available  989.358.7000  rollers@omni.com

STYLE ONE STYLE TWO

Additional options & customs available  989.358.7000  rollers@omni.com nnnnSR-19

1/4" Dia. 115901-O 27829 N/A

STYLE ONE STYLE TWO STYLE THREE STYLE FOUR

20-SRnnnn Additional options & customs available  989.358.7000  rollers@omni.com

1-3/8" OD x 3/16" Wall

Company: _____________________ Date:

Quantity: ___ Type of Bearing:

Quantity: _ Axle Size: ______(Hex or

Company: _____________________ Date:

Quantity: _ Axle Size: ___ (Hex or Round)

Company: _____________________ Date:

Quantity: _ Axle Size: ___ (Hex or Round)