Information Technology

Academic Documents for
FY B. Tech. (Information Technology)
Walchand College of Engineering, Sangli

(An Autonomous Institute)
Contents
S.No. Description Page No.
1 Vision Mission and Objectives of Institute 3

2 Vision, Mission, and Programme Educational Objectives of Department 4
3 Programme Outcomes 5
4 Curriculum Structure B. Tech. (Information Technology) (2018-2022) 6
5 Syllabus for FY B. Tech. (Information Technology) (w. e. f., 2018-19) 19

Semester I 20
Basic Science Courses
Engineering Science Courses
Humanities
Semester II 55
Basic Science Courses
Engineering Science Courses
Humanities
6 Academic Rules and Regulations (V1.6) [UG] 81
(After 5th Academic Council Meeting)
7 Changes/Amendments in Academic Rules and Regulations [UG] 114

(After 6th and 7th Academic Council Meeting)
8 Academic Calendar 119

9 Time table 121
Academic Documents for Information Technology

2
Vision Mission and Objectives of Institute
Vision:
1. To produce capable graduate engineers with an aptitude for research and

leadership
Mission:
1. To impart quality education through demanding academic programmes.

2. To enhance career opportunities for students through exposure to industry.
3. To promote excellence by encouraging creativity, critical thinking and
discipline.
4. To inculcate sensitivity toward society and a respect for the environment.
Objectives:
1. Achieve excellence in learning and research through continual improvement in

both content and delivery of the academic programmes.
2. Promote close interaction among industry, faculty and students to enrich the
learning process and enhance career opportunities for students.
3. Develop state - of - the - art laboratories and other infrastructure commensurate
with the need of delivering quality education and research services.
4. Strngthen the Institution through network of alumni and optimize use of
resources by leveraging inter - departmental capabilities.
5. Provide opportunities and ensure regular skill. Up - gradation of faculty and
staff through structured training programmes.

3
Vision, Mission, and Programme

Educational Objectives of Department
VISION:
To be an Information Technology programme as the first choice by the
aspiring students and prospective employers by implementing world class
education practices.
MISSION:
To meet above Vision, all stakeholders of this programme are committed
towards Outcome Based Education Philosophy by-
1. Adopting vibrant academic curricula and implementing innovative
teaching learning processes
2. Providing opportunities to the students for the development of professional

skills
3. Nurturing critical thinking and creativity in students
4. Inculcating students the life-long learning attitude and sensitivity towards

society & environment
Program Educational Objectives of UG (Information Technology)
Programme Educational Objectives of Department of Information Technology are as

follows.
Graduates of Information Technology programme after a span of three to four years of
their graduation will:
Demonstrate technical competency by applying knowledge to solve

PEO1
problems related to engineering issues.
Exhibit skills and appropriate attitude to succeed in their professional
PEO2
career.
Display thirst for emerging technologies and quest for innovation with
PEO3
concern to society and environment.

4
Programme Outcomes
Engineering Graduates will be able to:
1. Engineering knowledge: Apply the knowledge of mathematics, science, engineering

fundamentals, and an engineering specialization to the solution of complex engineering
problems.
2. Problem analysis: Identify, formulate, review research literature, and analyze complex
engineering problems reaching substantiated conclusions using first principles of
mathematics, natural sciences, and engineering sciences.
3. Design/development of solutions: Design solutions for complex engineering problems
and design system components or processes that meet the specified needs with appropriate
consideration for the public health and safety, and the cultural, societal, and environmental
considerations.
4. Conduct investigations of complex problems: Use research-based knowledge and
research methods including design of experiments, analysis and interpretation of data, and
synthesis of the information to provide valid conclusions.
5. Modern tool usage: Create, select, and apply appropriate techniques, resources, and
modern engineering and IT tools including prediction and modeling to complex engineering
activities with an understanding of the limitations.
6. The engineer and society: Apply reasoning informed by the contextual knowledge to
assess societal, health, safety, legal and cultural issues and the consequent responsibilities
relevant to the professional engineering practice.
7. Environment and sustainability: Understand the impact of the professional engineering
solutions in societal and environmental contexts, and demonstrate the knowledge of, and need
for sustainable development.
8. Ethics: Apply ethical principles and commit to professional ethics and responsibilities and
norms of the engineering practice.
9. Individual and team work: Function effectively as an individual, and as a member or
leader in diverse teams, and in multidisciplinary settings.
10. Communication: Communicate effectively on complex engineering activities with the
engineering community and with society at large, such as, being able to comprehend and
write effective reports and design documentation, make effective presentations, and give and
receive clear instructions.
11. Project management and finance: Demonstrate knowledge and understanding of the
engineering and management principles and apply these to one’s own work, as a member and
leader in a team, to manage projects and in multidisciplinary environments.
12. Life-long learning: Recognize the need for, and have the preparation and ability to
engage in independent and life-long learning in the broadest context of technological change.

5
PROGRAM SPECIFIC OUTCOMES (B.Tech.)
PSO1: Apply Software Engineering practices, Programming logic,

Networking techniques and Information Storage Management in project
development process.
Information
Technology
PSO2: Conceptualize ideas into IT based solutions with industry interaction
using cutting edge technologies such as Data Mining, High Performance
Computing, Artificial Intelligence, Machine Learning, Computer Vision and
Information Security.

6

Curriculum (Structure)
for
B. Tech. in Information Technology
Academic Year
FY B. Tech. 2018-2019
SY B. Tech. 2019-2020
TY B. Tech. 2020-2021
Final Year B. Tech. 2021-22

7

Teaching and Evaluation Scheme effective from 2018-19
First year B. Tech. Program in Information Technology
Semester I
Course Teaching Scheme Evaluation Scheme
Marks
Category Code Name L T P Credits Component
Min for
Max
Passing
ISE 1 10
Chemistry for Computer MSE 30
BS 4CH103 3 - - 3 40
Professionals ISE 2 10
ESE 50 20
ISE 1 10
Engineering MSE 30
BS 4MA101 3 1 - 4 40
Mathematics I ISE 2 10
ESE 50 20
ISE 1 10
Introduction to MSE 30
ES 4AM102 2 - - 2 40
Engineering Mechanics ISE 2 10
ESE 50 20
ISE 1 10
MSE 30
ES 4CV101 Basic Civil Engineering 2 - - 2 40
ISE 2 10
ESE 50 20
ES 4ME102 Engineering Graphics 1 - 4 3 ISE 100 40
ISE 1 10
Elective on Basic MSE 30
BS 4BS10* 2 - - 2 40
Sciences ISE 2 10
ESE 50 20
Engineering Chemistry
BS 4CH151 - - 2 1 ISE 100 40
Laboratory
Civil and Mechanics
ES 4CV151 - - 2 1 ISE 100 40
Laboratory
ES 4ME152 Workshop Practice - - 2 1 ISE 100 40
Total Credits: 19
Total 13 1 10 19
Total Contact Hrs: 24
Elective on Basic Sciences

4BS101 Biology for Engineers 4BS102 Material Science
Introduction to
4BS103 4BS104 Life Science
Geoscience

8

First year B. Tech. Program in Information Technology
Semester II

Marks
Min for
Max
Passing
ISE 1 10
Physics for Computer MSE 30
BS 4PH103 3 - - 3 40
Professionals ISE 2 10
ESE 50 20
ISE 1 10
Engineering MSE 30
BS 4MA102 3 1 - 4 40
Mathematics II ISE 2 10
ESE 50 20
ISE 1 10
Basic Mechanical MSE 30
ES 4ME101 2 - - 2 40
Engineering ISE 2 10
ESE 50 20
ISE 1 10
Basic Electrical MSE 30
ES 4EL101 2 - - 2 40
ESE 50 20
ISE 1 10
Basic Electronics MSE 30
ES 4EN101 2 - - 2 40
ESE 50 20
ISE 1 10
English for Professional MSE 30
HS 4HS101 2 1 - 3 40
Communication ISE 2 10
ESE 50 20
Engineering Physics
BS 4PH151 - - 2 1 ISE 100 40
Laboratory
Electronics Engineering
ES 4EN151 - - 2 1 ISE 100 40
Laboratory
ES 4IT151 Programming in C 0 0 4 2 ISE 100 40
Total Credits: 20
Total 14 2 8 20

9

Second year B. Tech. Program in Information Technology
Semester I

Marks
Min for
Max
Passing
ISE 1 10
Applied Mathematics
BS 4IT201 MSE 30
for Information 3 0 0 3 40
ISE 2 10
Technology
ESE 50 20
ISE 1 10
PC 4IT202 MSE 30
Discrete Mathematics 3 1 0 4 40
ISE 2 10
ESE 50 20
ISE 1 10
PC 4IT203 MSE 30
Data Structures 3 0 0 3 40
ISE 2 10
ESE 50 20
ISE 1 10
PC 4IT204 MSE 30
Microprocessors 3 0 0 3 40
ISE 2 10
ESE 50 20
ISE 1 10
PC 4IT205 MSE 30
Data Communication 2 1 0 3 40
ISE 2 10
ESE 50 20
ISE 1 10
HS 4HS203 Environmental Science MSE 30
2 1 0 3 40
ISE 2 10
ESE 50 20
PC 4IT251 Data Structures ISE 50 20
0 0 2 1
Laboratory ESE 50 20
PC 4IT252 Microprocessors ISE 50 20
0 0 2 1
Object Oriented ISE 50 20
PC 4IT253 Programming 0 0 4 2
ESE 50 20
Laboratory
Total Credits: 23
Total 16 3 8 23

10

Second year B. Tech. Program in Information Technology
Semester II

Marks
Min for
Max
Passing
ISE 1 10
4HS201/ Development of
HS 2 0 0 2 MSE 30 40
4HS202 Societies/Philosophy
ISE 2 10
ESE 50 20
ISE 1 10
PC 4IT221 MSE 30
Theory of computation 3 1 0 4 40
ISE 2 10
ESE 50 20
ISE 1 10
PC 4IT222 MSE 30
Computer Architectures 2 1 0 3 40
ISE 2 10
ESE 50 20
ISE 1 10
PC 4IT223 MSE 30
Computer Networks 3 0 0 3 40
ISE 2 10
ESE 50 20
ISE 1 10
PC 4IT224 MSE 30
Software Engineering 3 0 0 3 40
ISE 2 10
ESE 50 20
PC 4IT271 Computer Network ISE 50 20
0 0 2 1
PC 4IT272 Software Engineering ISE 50 20
0 0 2 1
PC 4IT273 Java Programming ISE 50 20
0 0 4 2
PC 4IT274 Mini Project 1 0 0 2 1 ISE 100 40
Total Credits: 20
Total 13 2 10 20

11

Third year B. Tech. Program in Information Technology
Semester I

Marks
Min for
Max
Passing
ISE 1 10
OE 4OE3** Open Elective 1 3 0 0 3 MSE 30 40
ISE 2 10
ESE 50 20
Fundamentals ISE 1 10
of Management and MSE 30
4 0 0 4 40
4HS Economics for ISE 2 10
HS 307/401 Engineers ESE 50 20
ISE 1 10
PC 4IT301 MSE 30
Database Engineering 3 0 0 3 40
ISE 2 10
ESE 50 20
ISE 1 10
PC 4IT302 MSE 30
Operating System 3 0 0 3 40
ISE 2 10
ESE 50 20
ISE 1 10
PC 4IT303 MSE 30
Computer Algorithm 3 0 0 3 40
ISE 2 10
ESE 50 20
ISE 1 10
PE 4IT3** MSE 30
Professional Elective 1 3 0 0 3 40
ISE 2 10
ESE 50 20
PC 4IT351 Database Engineering ISE 50 20
0 0 2 1
PC 4IT352 Mini Project 2 0 0 2 1 ISE 100 40
PC 4IT353 ISE 50 20
Web Technology 1 0 2 2
ESE 50 20
Total Credits: 23
Total 20 0 6 23

12
List of Professional Elective 1

4IT311 Cloud Computing
4IT312 Wireless Networks
4IT313 Computer Graphics and Multimedia Techniques
4IT314 Advanced Data Structure
4IT315 Artificial Intelligence
Open Elective 1
Course Code Course Name Offered by
4OE 315 Remote Sensing & GIS, GPS Civil Engg.,
4OE329 Manufacturing Engineering Mechanical
4OE330 Energy Engineering Mechanical
4OE331 Mechanisms & Machines Mechanical
4OE 343 Electrical Machine Technology Electrical
4OE 357 Electronic Systems Electronics Engg.,
4OE 371 Software Engineering and Database CSE
Essentials
4OE 372 Algorithms and Applications CSE
4OE 385 Internet of Things IT
4OE 386 Python IT
4OE 387 Free and Open Source Software IT

13

Third year B. Tech. Program in Information Technology
Semester II

Marks
Min for
Max
Passing
ISE 1 10
ISE 2 10
ESE 50 20
Elective Foundation ISE 1 10
HS 4HS3** Course in MSE 30
3 0 0 3 40
Humanities ISE 2 10
ESE 50 20
ISE 1 10
PC 4IT321 Advanced Database MSE 30
3 1 0 4 40
ESE 50 20
ISE 1 10
PC 4IT322 Digital Image MSE 30
3 0 0 3 40
Processing ISE 2 10
ESE 50 20
ISE 1 10
PC 4IT323 Unix Operating MSE 30
3 0 0 3 40
System ISE 2 10
ESE 50 20
ISE 1 10
PE 4IT3** Professional Elective MSE 30
3 0 0 3 40
2 ISE 2 10
ESE 50 20
PC 4IT371 Unix Operating ISE 50 20
0 0 2 1
System Laboratory ESE 50 20
PC 4IT372 Mini Project 3 ISE 100 40
0 0 2 1
Parallel ISE 50 20
PC 4IT373 Programming
ESE 50 20
Laboratory 1 0 2 2
Total Credits: 23
Total 19 1 6 23

14
Professional electives on theory courses may also be opted by students of other

programme.
Elective Foundation Course in Humanities

4HS 301 Law and Engineering 4HS 304 Psychology
4HS 302 Ethics and Holistic Life 4HS 305 Sanskrit/Foreign language
4HS 303 Education, Technology and Society 4HS 306 Human Relations at Work

4IT331 Machine Learning
4IT332 Virtualization Techniques
4IT333 IoT Systems and Applications
4IT334 Information Storage Management
Open Elective 2
4OE 309 Theory of Structures Applied Mechanics
4OE 336 Power Plant Engineering Mechanical
4OE 337 Fabrication Tech. Mechanical
4OE 338 Mech. Power Transmission Mechanical
4OE350 Renewable Energy Electrical
4OE366 Biomedical Instrumentation Electronics
4OE378 Data Analytics CSE
4OE379 Network Essentials CSE
4OE392 Web Design IT
4OE393 Cloud and virtualization IT
4OE394 Game Development IT

15

Final Year B. Tech. Program in Information Technology
Semester I

Marks
Category Code Name L T P Credits Component Min
Max for
Passing
ISE 1 10
ISE 2 10
ESE 50 20
ISE 1 10
PC 4IT401 Cryptography & MSE 30
3 0 0 3 40
Network Security ISE 2 10
ESE 50 20
ISE 1 10
PC 4IT402 MSE 30
Data Mining 3 0 0 3 40
ISE 2 10
ESE 50 20
ISE 1 10
PE 4IT4** Professional MSE 30
3 0 0 3 40
Elective 3 ISE 2 10
ESE 50 20
PC 4IT451 Data Mining ISE 50 20
0 0 2 1
PC 4IT441 Project 1 and
ISE 100 40
Seminar 0 0 6* 3
Open Source ISE 50 20
PC 4IT452 Software 1 0 2 2
ESE 50 20
Laboratory
Software Testing ISE 50 20
PC 4IT453 and Quality 1 0 2 2
ESE 50 20
Assurance
Essence of Indian ISE 1 35
MC 4IC402 Traditional 2 0 0 0 MSE 30 40
Knowledge ISE 2 35
Total Credits: 20
Total 16 0 12 20

16

4IT411 High Performance Computing
4IT412 Distributed System
4IT413 Software Defined Network
4IT414 Mobile ad-hoc & Sensor Networks
4IT415 Data Analytics
4IT416 Deep Learning
Open Elective 3
4OE 402 Finite Element Method APM
4OE 416 Concrete Engineering and Technology Civil
4OE 429 Auto. Engg Mechanical
4OE 430 Aerospace Engg Mechanical
4OE 431 Ind. Automation Mechanical
4OE 443 Industrial Automation Electrical
4OE 457 Cyber Physical Systems Electronics
4OE458 Automobile Electronics Electronics
4OE 471 Cyber Security CSE
4OE 485 Data Visualization & Interpretation IT
4OE 486 Social Network Analysis IT
4OE 487 Basics of Soft Computing IT

17

Final Year B. Tech. Program in Information Technology
Semester II

Marks
Min for
Max
Passing
ISE 1 10
PE 4IT4** Professional Elective 3 0 0 3 MSE 30 40
4
ISE 2 10
ESE 50 20
PC 4IT491 Project 2 ISE 50 20
0 0 8* 8
ESE 50 20
Summer Internship#
PC 4IT492 / Techno Socio 0 0 2 1 ISE 100 40
Outreach Activity
ISE 1 35
MC 4IC401 Indian Constitution 2 0 0 0 MSE 30 40
ISE 2 35
Total Credits: 12
Total 5 0 10 12
# indicates internship to be completed during summer vacations after second year but before
Final year semester I

4IT431 Business Intelligence
4IT432 Geographic Information System
4IT433 Visual Computing
4IT434 Software Architecture Design
4IT435 Big Data Analytics
4IT436 Soft Computing
4IT437 Cyber Law & IPR
Semester I II III IV V VI VII VIII Total

Credits 19 20 23 20 23 23 20 12 160

18

Curriculum Comparison for WCE and AICTE
B. Tech.
Category
Humanities and Social Sciences

Information Technology including Management courses (HS)
Category
Sr.
Credits %
No. Basic Science courses (BS)
AICTE DEPT AICTE DEPT
1 HS 12 15 7.5 9.4 Engineering Science courses (ES)
2 BS 24 21 15.1 13.1
3 ES 29 18 18.2 11.3 Professional core courses (PC)
4 PC 49 73 30.8 45.6
Professional Elective courses
5 PE 18 12 11.3 7.5 relevant to chosen
specialization/branch& (PE)
6 OE 12 9 7.5 5.6
7 PC 15 12 9.4 7.5 Open subjects – Electives from other
technical and /or emerging subjects
8 MC 0 0 0 0 (OE)
Total
159 160 100 100 Project work, seminar and internship
Credits
in industry or elsewhere (PC)
Mandatory Non- credit Courses

(MC)
Additional Minor Engineering with additional 20 credits through SWAYAM/MOOCS
Student/s will be awarded an additional Minor Engineering along with B. Tech.(Information
Technology) if he/she completes an additional 20 credits through SWAYAM/MOOCS.

19

Curriculum (Structure and Syllabus)
for
First Year B. Tech.
Information Technology
With effective from
Academic Year 2018-19

20
Title of the Course: Chemistry for Computer Professionals 4CH103

L T P Cr
03 0 0 03
Pre-Requisite Courses: Chemistry course at secondary and higher secondary level
Textbooks: 1. S.K. Singh, “Engineering Chemistry”, New Age Publication, 3rd Edition , 2005.
2. Shasi Chawla, “Engineering Chemistry”, Dhanpat Rai Publication, 3rd Edition , 2003.
3. Jain P.C. and Jain Monika, “Engineering Chemistry”, Dhanpat Rai Publication, 16th
Edition, 2013.
References:
1. O G Palanna, “Engineering Chemistry” Tata McGraw Hill 2009.
2. J Mendham, R.C. Denney, J.D. Barnes, M.J.K Thomas, “Quantitative Chemical analysis”, Vogel’s
Pearson Education, 6thEdition , 2008.

3. S.S Dara, “Engineering Chemistry” S. Chand and Company 2008.
4. Askeland and Phule , “The Science and Engineering of Materials” Thomson Publication 4th
Edition ,2003
Course Objectives :
1. To make student familiar with engineering properties associated with different materials to use them
successfully in practice.
2. To provide knowledge on methods of characterization and chemical analysis.
Course Learning Outcomes:
CO After the completion of the course the student should be able to Bloom’s Cognitive
level Descriptor
CO1 Explain chemical analysis, water chemistry, phase rule, energy science II Understanding
and electronic engineering materials and water’s industrial
applications. Draw schematic of water softeners, phase diagrams, film
deposition techniques and spectroscopy.
CO2 Classify types of chemical analysis, hard water, fuel cell, modern II Understanding
techniques, engineering materials and thin film deposition techniques.
CO3 Calculate concentration of solutions, hardness of water, wave number, III Applying
frequency, wavelength, energy associated with radiations, Calorific
value.
CO-PO Mapping:
IT
PO a b c d e f g h i j k l
CO1 1
CO2 1
CO3 1

21
Assessments :
Teacher Assessment:
Two components of In Semester Evaluation (ISE), One Mid Semester Examination (MSE) and one End
Semester Examination (ESE) having 20%, 30% and 50% weights respectively.
Assessment Marks
ISE 1 10
MSE 30
ISE 2 10
ESE 50
ISE 1 and ISE 2 are based on assignment/declared test/quiz/seminar etc.
MSE: Assessment is based on 50% of course content (Normally first three modules)
ESE: Assessment is based on 100% course content with 70-80% weightage for course content (normally
last three modules) covered after MSE.
Course Contents:
Module 1. General principles of chemical Analysis - Chemical analysis, Its types, 07Hrs
Advantages and Disadvantages of instrumental and non-instrumental methods, Different ways
to express concentration of solution. Numerical problems. Standards and its types. Titrimetric
analysis, Definition of terms associated with titrimetry. Classification of titrimetry, Gravimetry
and its requirements, applications.
Module 2 Water Chemistry - Natural sources of water, Impurities in natural water. Water 7Hrs.
quality parameters Hardness- Definition, Causes, Types, Expressing hardness, units to measure
hardness, Numerical problems on hardness calculation, ill effects of hard water in steam
generation, Alkalinity, Chloride , Dissolved oxygen(DO), Biological Oxygen Demand (BOD)
and Chemical Oxygen Demand (COD) its significance. Ion exchange method of water
softening.
Module 3- Phase Rule: Gibbs phase rule, Explanation of the terms Phase, Component, Degree 6Hrs.
of freedom, Phase reactions, types of equilibrium, equilibrium conditions. One component
system-Water system, Sulphur system, Two component system- Lead Silver system,
Application of Eutectic system, Merit and Demerits of Phase rule.
Module 4.Energy Science: Fuel and its classification, Characteristics of good fuel, Properties 6Hrs.
of solid, liquid and gaseous fuels. Calorific value, Gross and net calorific value, its units, and
determination by bomb and Boys calorimeter, Numerical problems on calorific value. Fuel cell,
its types and applications.
Module 5 Modern Analytical Techniques- EM radiation and Electromagnetic spectrum, 7Hrs.

Interaction of matter and EM radiation, UV-Visible spectrophotometry, Atomic absorption
spectroscopy w.r.t. Principle, Instrumentation, Calibration, Applications. Chromatography,
account of Gas Liquid chromatography.
Module 6 Electronic Engineering Materials: Material, Engineering Materials and types of 7Hrs.
engineering materials, Bulk materials and Thin films materials, Thin film definition,
Requirements of ideal thin films, Thin film deposition techniques Physical Vapor Deposition
(PVD), Chemical Vapor deposition (CVD) w.r.t. equipment, precursor. Comparison,
applications of thin films in storage devices.

22
Module wise Measurable Students Learning Outcomes :

After the completion of the course the student should be able to:
1: Explain and select chemical method of analysis.
2: Decide suitability of available water towards various industrial applications.
3: Describe one and two component systems and terms associated with respect to heterogeneous systems.
4: Describe and determine calorific value by different methods. Solve combustion related problems
5: Compare and contrast different modern analysis techniques
6: Choose proper substrate, precursor and method of deposition as per required characteristics

23
Title of the Course: Engineering Mathematics I 4MA101

L T P Cr
3 1 - 4
Pre-Requisite Courses: Mathematics course at Higher Secondary Junior College
Textbooks:
1. P. N. and J. N. Wartikar “A Text Book of Applied Mathematics, Vol I and II, Vidyarthi Griha
Prakashan, Pune, 2006.
2. B .S. Grewal “Higher Engineering Mathematics”, , Khanna Publication, 44th Edition, 2017.
References:
1. Erwin Kreyszig , ”Advanced Engineering Mathematics”, , Wiley Eastern Limited Publication, 10th
Edition, 2015.
2. Wylie C.R “Advanced Engineering Mathematics”,., Tata McGraw Hill Publication, 8th Edition
1999.
3. H. K. Dass, “Advanced Engineering Mathematics”, S. Chand & Company Ltd., 1st Edition, 2014.
4. B.V.Ramana, “Higher Engineering Mathematics ”, The McGraw Hill companies, 2006.
Course Objectives :
1) Introduce the basic concepts required to understand, construct, solve and interpret various types
of differential equation.
2) Give an ability to apply knowledge of Mathematics on Engineering problems.
level Descriptor
CO1 Explain mathematical concepts relevant to address problems in II Understanding
engineering field.
CO2 Solve engineering and scientific problems. III Applying
CO-PO Mapping :
IT:
a b c d e f g h i j k
CO1 2 1
CO2 2 1

24
Assessments :
Teacher Assessment:
Assessment Marks
ISE 1 10
MSE 30
ISE 2 10
ESE 50
ESE: Assessment is based on 100% course content with60-70% weightage for course content (normally
Course Contents:
Module 1 : Matrices 6Hrs.

Rank of matrix, Homogeneous and non-homogeneous linear equations, symmetric and
skew symmetric and orthogonal matrices, Eigen values, Eigen vectors, Cayley Hamilton
theorem, Diagonalisation of matrices.
Module 2: Calculus
Rolle’s theorem, Mean value theorem, Taylor’s and Maclaurin’s theorem with 6Hrs.
remainders, L’hospital rule and indeterminate forms
Module 3: Complex Number 7Hrs.

Polar form of complex number, Argand’s diagram, De Moiver’s theorem, roots of
complex number, Hyperbolic function, exponential form of complex number, relation
between circular and hyperbolic function.
Module 4: Partial Differentiation and its application 8Hrs.

Partial derivative, chain rule for partial differentiation, Euler’s theorem for homogeneous
and non-homogeneous function, Jacobian, Error and approximation, maxima and minima
of function of two variables.
Module 5: First order ordinary differential equation and its application 8Hrs.
Exact, Linear, Bernoulli’s equations, Euler’s equations, Orthogonal trajectory,
applications to simple electric circuit.
Module 6: Curve tracing 5Hrs.
Tracing of curves for Cartesian and polar coordinate.

25
Module wise measurable students learning outcome:

After the completion of the course the student should be able to
Module 1 : Matrices
solve problems related with matrices.
Module 2: Calculus
solve problems in calculus.
Module 3: Complex Number
solve problems in complex number.
Module 4: Partial Differentiation and its application
solve problems of partial differentiation
Module 5: First order ordinary differential equation and its application
explain and solve problems in First order ordinary differential equation.
Module 6: Curve tracing
trace the different curves.
Tutorial:
During the tutorial we will ensure that the students have properly learnt the topics covered in the
lectures. This shall include assignments, quiz, surprise test or declare test. The teacher may
add another activity.

26
Title of the Course: Introduction to Engineering Mechanics 4AM102

L T P Cr
2 0 0 2
Pre-Requisite Courses: Physics
Textbooks:
1. Ramamrutham., S. “Textbook of Applied Mechanics”, Dhanpat Rai Publishing Company Limited, 2008.
2. Bhavikatti., S. S. and Rajashekarappa., K. G. “Engineering Mechanics”, New Age International
Publishers, 2015, 5th Edition.
3. Khurmi. R. S., “Textbook of Applied Mechanics”, Tata McGraw Hill Publishing Company, 2013, 20th
Revised Edition.
References:
1. Beer, F. P. and Johnston, E. R. “Vector Mechanics for Engineers Vol. I and II”, McGraw Hill Company
Publication, 2011, 9th Edition.
2. Singer, F. L. “Engineering Mechanics Statics & Dynamics”, B. S. Publications, 2011.
3. Timoshenko, S. and Young, D. H. “Engineering Mechanics”, McGraw Hill Companies, 2008, 4th
Edition.
4. Meriam, L. and L.G. Kraige, “Engineering Mechanics – Dynamics”, John Wiley & Sons, 2002, 6th
Edition.
Course Objectives :
1. To impart knowledge of mechanics concepts applicable to civil and mechanical engineering.
2. To illustrate behavior of static bodies using mechanics concepts.
3. To provide knowledge of motions, forces and work energy principles and its engineering
applications.

Level Descriptor
CO1 Apply laws and basic principles of mechanics of rigid bodies. II Understanding
CO2 Analyze system of forces in Statics and Dynamics. IV Analyzing
CO3 Apply concept of mechanics to solve engineering problems. III Applying
CO-PO Mapping:
IT
CO1 1
CO2 1
CO3 1

27
Assessments :
Teacher Assessment:
Assessment Marks
ISE 1 10
MSE 30
ISE 2 10
ESE 50
Course Contents:
Module 1: Introduction to mechanics Hrs.
Units, Particle, Elastic & Rigid Bodies, Scalar & Vector Quantities. Force, Resolution and
5
composition of forces, Laws of Mechanics, Moment, Couple.
Module 2: Equilibrium Hrs.
Concept of equilibrium, Conditions of equilibrium, free body diagram, Lami’s theorem,
4
Reactions of determinate beams
Module 3: Moment of inertia Hrs.
Centre of gravity, Centroid, Moment of inertia, Radius of gyration, Parallel axes theorem,
5
Perpendicular axes theorem, Moment of inertia of unsymmetrical sections
Module 4: Kinematics of particles Hrs.
Rectilinear motion of a particle, equations of motion, motion under Gravity, motion of a
projectile, curvilinear motion of a particle, angular motion of a particle, relation between linear 5
and angular motion.
Module 5: Kinetics of particles Hrs.
Newton’s law of motion, D’Alemberts principle, rectilinear motion, motion on a rough inclined
plane, motion of a lift, motion of connected bodies, curvilinear motion, circular motion, kinetics 5
of rotation, torque, mass moment of inertia.
Module 6: Kinetics Hrs.
Work energy, potential energy, kinetic energy, law of conservation of energy, Problems,
impulse, momentum, collisions, impact, collision of bodies, coefficient of restitution, loss of 4
kinetic energy due to impact.
1. Apply fundamental knowledge of engineering mechanics for rigid bodies under system of forces.
2. Apply conditions of equilibrium to determine the support reactions of determinate beams.
3. Analyse planer bodies to find sectional properties such as centre of gravity and moment of inertia.
4. Apply knowledge of kinematics of rigid body motion to solve engineering problems in dynamics
5. Apply knowledge of kinetics of rigid body motion to solve engineering problems in dynamics and
recognition of the importance of safety in phases of engineering design and practice.
6. Analyze the impact of work power

Academic and energy
Documents on engineering
for Information problems.
Technology
28
Title of the Course: Basic Civil Engineering 4CV101 L T P Cr

2 0 0 2
Pre-Requisite Courses: NIL
Textbooks:
1. Gole L.G., “Introduction to Civil Engineering”, Mahu Publisher House, 4th Edition, 2005
2. Bhavikatti S.S.,“Basic Civil Engineering”, New Age Publications, 2010
3. Hirasakar G. K.,“Basic Civil Engineering”, Dhanpat Rai publications, 1st Edition,2007
References:
1. Duggal S.K., “Surveying (Vol I)”, Tata McGraw Hill, 4th edition 2013
2. Bindra S.P., Arora S.P. , “Building Construction”, Dhanpat Rai publication, 5th edition, 2012
3. Garg S. K., “Irrigation Engineering”, Dhanpat Rai publication, 24th edition, 2012
Course Objectives :
1. To enable the students of non-Civil Engineering branch to acquire knowledge in Civil Engineering
for application oriented concepts and ideas.
2. To share the knowledge related to environment, infrastructure and property transaction.
Bloom’s Cognitive
CO After the completion of the course the student should be able to
Level Descriptor
Explain concepts in Civil Engineering related to infrastructure, II
CO1 Understanding
construction, environment and surveying.
CO2 Summarize applications of Civil Engineering in various fields. II Understanding
CO3 Perceive the need of infrastructure development and property II Understanding

transaction

29
CO-PO Mapping with regards to B.Tech Information Technology Engineering Programme:
PO a b c d e f g h i j k
CO1 2 1 1
CO2 2 1
CO3 1 2 2
Assessment:
Semester Examination (ESE) having 20%, 30% and 50% weightage respectively.
Assessment Marks
ISE 1 10
MSE 30
ISE 2 10
ESE 50
ISE 1 and ISE 2 are based on assignment, oral, seminar, test (surprise/declared/quiz), and group
discussion.[One assessment tool per ISE. The assessment tool used for ISE 1 shall not be used for ISE
2]
Course Contents:
Module 1 Introduction to Civil Engineering Hrs.
Basics of engineering and civil engineering; broad disciplines of Civil engineering; Importance of
Civil engineering, opportunities in civil engineering, infrastructure growth and real estate
management in India
Early constructions and developments over time; ancient monuments & modern marvels; works of
eminent civil engineers 6
Surveying-definition, classification and basic principles, types of scales, chain survey, linear and
angular measurements, terms used in levelling, methods of reduction of levels, use of dumpy level
and auto level, Introduction and use of digital planimeter,
Module 2 Fundamentals of Building Materials and Principles
Properties and uses of basic materials: cement, bricks, stone, timber, natural and artificial sand, steel,
concrete, PCC, RCC, brick masonry.
Buildings-selection of site, types and basic functions. Basics of soil mechanics, various types of
foundations.
6
Principles of building planning, introduction to building bye laws and role of bye laws in regulating
the environment. Concept of built up area, carpet Area and F.S.I., concept of green building.
Introduction to smart cities
Module 3 Basics of Construction Management & Structural Engineering

30
Temporary structures in construction; Construction methods for various types of Structures; Major
construction equipment; automation & robotics in construction; Modern project management systems;
importance of contracts management 5
Structural Engineering: Types of buildings; tall structures; various types of bridges; other structural
systems; Substructure and superstructure, components & their functions; concept of strength, stability,
factor of safety
Module 4 Infrastructure
Investments in transport infrastructure development in India for different modes of transport;
Developments and challenges in integrated transport development in India: road, rail, port and
harbour and airport sector; PPP in transport sector; Intelligent Transport Systems.
Roads: classification, cross section and components of road, Types of pavements, road maintenance, 6
concept of road safety audit, traffic signs, signals, road side and multistoried parking system, and
causes of accidents
Dams: purpose, selection of site, types of dams.
Module 5 Environmental Engineering & Sustainability
Water and Wastewater treatment systems; municipal and hazardous solid waste management;
sustainability in construction; 3
Module 6 Property Transaction

Land documents, property purchase and sale procedure. property selection criteria and marketability
of property transaction , property taxes; introduction to building finance 2

1. Paraphrase and apply fundamental knowledge of civil Engineering and use of modern
surveying Instrument.
2. Explain basic principles of planning and bye Laws. Evaluate various properties of building
materials.
3. Explain cconstruction Management and Structural Engineering
4. Perceive and Summarize the need of infrastructure development India.
5. Explain the importance of water treatment plant and solid waste management.
6. Perceive and Summarize the knowledge of Property transaction.

31
Title of the Course: Engineering Graphics 4ME102 L T P Cr

1 0 4 3
Pre-Requisite Courses:
Textbooks:
1. Bhatt N.D., Panchal V.M. and Ingle P.R., Engineering Drawing, Charotar Publishing House, 2014.
2. Shah, M.B. and Rana B.C., Engineering Drawing and Computer Graphics, Pearson Education, 2008.
3. Agrawal B. and Agrawal C. M., Engineering Graphics, TMH Publication, 2012.
References:
1. Narayana, K.L. and P Kannaiah, Text book on Engineering Drawing, Scitech Publishers, 2008.
2. Warren J. Luzzader, Fundamentals of Engineering Drawing, Prentice Hall of India, New Delhi, 2010
3. Fredderock E. Giesecke, Alva Mitchell others, Principles of Engineering Graphics, Maxwell McMillan
Publishing, 2010.
Course Objectives :
1. Introduce students to the conventions, concepts and basic principles of Engineering Drawing.
2. Draw projections of geometrical objects and real life components.
3. Demonstrate graphics skill for communication of concepts, ideas and design of engineering products

level Descriptor
CO1 Explain principles of Engineering and Computer Graphics 2 Understanding
CO2 Apply principles of Engineering and Computer Graphics to draw 3 Applying
projection of engineering objects
CO3 Demonstrate Principles of Engineering, Computer Graphics through 3 Applying
drafting software
CO-PO Mapping:
a b c d e f g h i j k l
CO1 1
CO2 1
CO3 1

32
Assessments :
In Semester Evaluation (ISE)

Assessment Marks
ISE based on drawing sheet submission (Minimum six 25
practice and six submission sheet)
ISE based on declared test of drawing sheet (Minimum 25
two)
ISE based on Autocad practical submission (Minimum 25

Six submission sheets)
ISE based on declared test of Autocad practical 25
submission/ oral
Assessment is based on 100% course content with 50 % weightage for manual drafting and 50 %
weightage for CAD. Student should get minimum 40% marks for passing.

33
Course Contents:
Module 1: Introduction to Engineering Drawing Hrs.
T-2, P-4
Principles of Engineering Graphics and their significance, usage of Drawing instruments,
lettering, Conic sections including the Rectangular Hyperbola (General method only);
Cycloid, Epicycloid, Hypocycloid and Involute; Scales – Plain, Diagonal and Vernier Scales;
Problems from the above units should also be practiced on computer aided drafting software.
Module 2: Orthographic Projections Hrs.
T-2, P-6
Principles of Orthographic Projections-Conventions - Projections of Points and lines inclined
to both planes; Projections of planes inclined Planes - Auxiliary Planes;
Module 3: Projections of Regular Solids Sections and Sectional Views of Right Angular Hrs.
Solids T-2, P-12
Inclined to both the Planes- Auxiliary Views; Draw simple annotation, dimensioning and
scale. Floor plans that include: windows, doors, and fixtures such as WC, bath, sink, shower,
etc.
Prism, Cylinder, Pyramid, Cone – Auxiliary Views; Development of surfaces of Right
Regular Solids - Prism, Pyramid, Cylinder and Cone; Draw the sectional orthographic views
of geometrical solids, objects from industry and dwellings (foundation to slab only)
Module 4: Isometric Projections Hrs.
T-2, P-6
Principles of Isometric projection – Isometric Scale, Isometric Views, Conventions; Isometric
Views of lines, Planes, Simple and compound Solids; Conversion of Isometric Views to
Orthographic Views and Vice-versa, Conventions;
Module 5: Introduction to Computer Aided Sketching Hrs.
T-2, P-12
Introduction, Drawing Instruments and their uses, BIS conventions, Lettering, Dimensioning
and free hand practicing. Computer screen, layout of the software, standard tool bar/menus
and description of most commonly used tool bars, navigational tools. Co-ordinate system and
reference planes. of HP, VP, RPP & LPP. of 2D/3D environment. Selection of drawing size
and scale. Commands and creation of Lines, Co-ordinate points, axes, poly-lines, square,
rectangle, polygons, splines, circles, ellipse, text, move, copy, off-set, mirror, rotate, trim,
extend, break, chamfer, fillet, curves, constraints viz. tangency, parallelism, inclination and
perpendicularity. Dimensioning, line conventions, material conventions and lettering.
Module 6: Annotations, layering & other functions Hrs.
T-3, P-12
Applying dimensions to objects, applying annotations to drawings; Setting up and use of
Layers, layers to create drawings, Create, edit and use customized layers; Changing line
lengths through modifying existing lines (extend/lengthen); Printing documents to paper
using the print command; orthographic projection techniques; Drawing sectional views of
composite right regular geometric solids and project the true shape of the sectioned surface;
Drawing annotation, Computer-aided design (CAD) software modeling of parts and
assemblies. Parametric and non-parametric solid, surface, and wireframe models. Part editing
and two dimensional documentation of models. Planar projection theory, including sketching
of perspective, isometric, multiview, auxiliary, and section views. Spatial visualization
exercises. Dimensioning guidelines, tolerancing techniques; dimensioning and scale multi
views of dwelling;

34

Explain engineering drawing and its place in society
Demonstrate visual aspects of engineering design
Explain, and apply engineering graphics projection of standard solid primitives
Demonstrate visualization of 3-D solid modeling
Demonstrate computer-aided geometric drafting
Explain and apply working drawings

35
L T P Cr
Title of the Course: Biology For Engineers 4BS101
2 0 0 2
Pre Requisite: Nil
Textbooks:
1. P. S. Verma and V. K. Agarwal, Concept of Cell Biology, S. Chand and Company Ltd, 2002.
2. R. D. Vidyarthi and P. N. Pandey, A Text book of Zoology, S. Chand and Company Ltd, 2004.
3. T. S. Ranganathan, Text book of Human Anatomy, S. Chand and Company Ltd, 2002.
References:
1. Peter H. Raven, George B. Johnson, Biology, McGraw hill, 11th edition, 2017.
2. Engelbert Buxbaum, Fundamentals of Protein Structure and Function, Springer, 2007.
3. Surinder Kumar, Essentials of Microbiology, Jaypee Brothers Medical Publishers (P) Ltd, 2016.
4. Laurence A. Cole, Biology of Life - Biochemistry, Physiology and Philosophy, Elsevier, 2016.
5. V. Sreekrishna, Comprehensive Biotechnology I - Cell Biology and Genetics, New Age, 2005.
Course Objectives:
1. Provide a foundation in basic biological principles.
2. Develop an understanding of the modern biological concepts and their applications to engineering
and life.
3. Describe the stages of biological evolution on Earth and the interrelation ships among the living
organims.
After the completion of the course the student should be able to Bloom’s Cognitive
CO
level Descriptor
Identify the characteristics and basic needs of living organisms and explain
CO1 II Understanding
the mechanisms of evolution in living organisms.
Outline the structure of the biomolecules and describe the structure and
function of cells including the metabolic reactions that occur in cells.
Describe the chromosome theory, molecular genetics as well as identify
microorganisms and their role in various environments.

36
CO-PO Mapping:
CO1 1
CO2
CO3
Assessments:
Teacher Assessment:
Two components of In-Semester Evaluation (ISE), One Mid-Semester Examination (MSE) and one
End-Semester Examination (ESE) having 20%, 30% and 50% weights respectively.
Assessment Marks
ISE 1 10
MSE 30
ISE 2 10
ESE 50

ESE: Assessment is based on 100% course content with60-70% weightage for course content (normally last
three modules) covered after MSE.
Course Contents:
Module 1 : Introduction and Classification Hrs
.
Introduction: History and Significance of Biology.

Evolution: Origin of life; Biological evolution.
03
Five kingdom classification; Need for classification, Salient features and classification of
Monera, Protista, Fungi, Plantae and Animalia, Lichens, Viruses and Viroids.
Module 2 : Molecular Biology Hrs

.
Cell theory and cell as the basic unit of life: Structure of Prokaryotic (Typical Bacterial Cell)
and Eukaryotic cell (Plant cell and animal cell)
Cell organelles: Structure and function of endoplasmic reticulum, Golgi bodies, lysosomes,
05
vacuoles; mitochondria, ribosomes, plastids, micro bodies; Cytoskeleton, cilia, flagella,
centrioles (ultra structure and function). Nucleus: nuclear membrane, chromatin, nucleolus.
Cell division: Cell cycle, mitosis, meiosis and their significance.

37
Module 3 : Genetics Hrs

.
Introduction: Chromosomes, DNA, RNA, Genes, Genetics, Transcription and Translation in

prokaryotic and eukaryotic cell
04
Inheritance: Mechanisms of inheritance, Unifactorial Inheritance, Multifactorial inheritance,
Sex-linked Inheritance.
Module 4 : Macromolecular Analysis and Protein Structure Hrs

.
Biomolecules: Structure and function of proteins (primary secondary, tertiary and quaternary
structure), carbohydrates, lipid, nucleic acids; 04
Enzymes: Types, properties, enzyme action: - Lock and Key hypothesis, Induced fit hypothesis.
Module 5 :Bioenergetics and Metabolism Hrs

.
Bioenergetics: Thermodynamics –First law of thermodynamics, second law of thermodynamics,

Gibbs free energy, endergonic & exergonic reactions,
ATP: Structure, properties and energy currency of the cell.
Introduction to Metabolism - Catabolism, anabolism, catabolic, anabolic and amphibolic
pathways
Carbohydrate Metabolism: Introduction, Aerobic and anaerobic pathways: Glycolysis and its
regulation, Gluconeogenesis and its regulation. TCA cycle, amphibolic & anaplerotic reactions, 07
production of ATP, Photosynthesis – ‘light’ and ‘dark’ reactions: C4-pathway.
Lipid Metabolism: Beta – oxidations of saturated & unsaturated fatty acids. Ketone bodies,
Biosynthesis of fatty acids – Acetyl-CoA carboxylase reaction, Fatty acid synthase complex,
Regulation of fatty acid biosynthesis. Biosynthesis of cholesterol.
Amino Acid Metabolism: Biodegradation of amino acids – deamination, transamination,
decarboxylation, urea cycle including its regulation. Biosynthesis of amino acids, Disorders of
amino acid metabolism.
Module 6 : Microbiology Hrs
.
Introduction , Concept of single celled organisms, Concept of species and strains, Identification
and
05
Classification of microorganisms, Microscopy, Ecological aspects of single celled organisms,
Sterilization and media compositions.
Module Wise Measurable Students Learning Outcomes:

Module 1 : Introduction and Classification
Identify and describe levels of organization and related functions in plants and animals, their characteristics
and basic needs. Explain the classification and the stages of biological evolution on Earth and the
interrelation ships among the living organims and development process in individuals and populations.
Module 2 : Molecular Biology

38
Describe the structure and function of eukaryotic and prokaryotic cells and explain the structure and
function of endoplasmic reticulum, Golgi bodies, lysosomes, vacuoles; mitochondria, ribosomes, plastids,
micro bodies; Cytoskeleton, cilia, flagella, centrioles (ultrastructure and function). Nucleus: nuclear
membrane, chromatin, nucleolus. including the metabolic reactions that occur in cells. And discuss the
process of cell division in both somatic and germ cells.
Module 3 : Genetics
Outline and explain the chromosome theory, molecular genetics and quantitative and evolutionary genetics.
Discuss the function, replication and evolution of genomes. Describe Transcription and Translation in
prokaryotic and eukaryotic cell Explain the process of inheritance.
Module 4 : Macromolecular Analysis and Protein Structure
Identify the structure of the biomolecules found in all living organisms. Describe how RNA, DNA and
proteins are synthesized and describe the types and properties of enzymes and enzyme action.
Module 5 :Bioenergetics and Metabolism
Explain the fundamental energetics of biochemical processes and the chemical logic of metabolic pathways.
Recognize the basic mechanisms of pathway regulation. Discuss the processes of metabolic transformation at
the molecular level.
Module 6 : Microbiology
Describe cellular, biochemical, and physiological aspects of microorganisms Explain cellular and
biochemical processes involved in pathogenesis (human-pathogen interactions).Identify microorganisms
and their role in various environments. Describe the cultural use of microorganisms in food production,
medicine, fuel production, and waste treatment.

39
Title of the Course: Material Science 4BS102

L T P Cr
2 0 0 2
Pre-Requisite Courses: 12th Std Basic science courses
Textbooks:
3. William D. Callister, “Fundamentals of Materials Science and Engineering”, Wiley India Pvt. Ltd,
7th Edition, 2009.
4. V.Raghavan, “Materials Science and Engineering”, PHI Publication, 6th Edition, 2015.
5. U.C.Jindal, “Material Science and Metallurgy”, Pearson India, 1st Edition, 2012.
References:
1. Van Vlack, lawrence H.,“Elements of Material Science and Engineering”, Pearson India, 6th
Edition, 2002.
2. Dr. Donald R. Askeland, “Essentials of Materials Science & Engineering”, Cengage Learning
Publisher, SI Edition, 3rd Edition 2013.
Course Objectives :
1. To explain the Mechanical, Magnetic and Thermal properties of Materials.
2. To introduce applications of Metals, Polymers, Ceramics, Composites and Advanced materials.
3. To impart the awareness about role of Materials in Human Evaluation and Industrial Evaluation.

CO After the completion of the course the student should be Bloom’s Cognitive
able to
level Descriptor
CO1 Summarize various mechanical properties of materials used in II Understanding
engineering practices.
CO2 Compare applications of advanced in materials by considering II Understanding
their properties.
CO3 Discuss social issues, environmental issues and recycling II Understanding
practices related to materials.
CO-PO Mapping :
CO1 1 1 1
CO2 1 1 1
CO3 1 1 1

40
Assessment:
Assessment Marks
ISE 1 10
MSE 30
ISE 2 10
ESE 50
discussion.[One assessment tool per ISE. The assessment tool used for ISE 1 shall not be used for ISE 2]
Course Contents:
Module 1: Introduction 6 Hrs.
Historical perspective of Materials Science. Why study properties of materials?
Classification of materials. Miller indices. Crystallography and Structure of Metals , Unit
cell, Crystal systems, Bravais lattice, Miller indices for directions and planes, Close-
packed planes and directions, Packing efficiency, Interstitial voids, Hume-Rothery rules,
Role of X-ray diffraction in determining crystal structures.
Module 2: Mechanical Properties of Metals 6 Hrs.

Elastic deformation. Plastic deformation. Interpretation of tensile stress-strain curves
Yielding under multiaxial stress. Fracture. Ductile and brittle fracture, Yield criteria and
macroscopic aspects of plastic deformation.
Module 3: Applications of Polymers and Composites 4 Hrs.

Types of polymers, Plastics, Special purpose plastics. Particle reinforced composites.
Fiber reinforced composites. Structural composites
Module 4: Thermal and Magnetic Properties of Materials 4 Hrs.

Heat capacity. Thermal expansion. Thermal conductivity. Thermal stresses.
Diamagnetism and paramagnetism. Ferromagnetism.Antiferromagnetism and
ferrimagnetism. Influence of temperature on magnetic behavior. Domains and
Hysteresis, Superconducting materials.
Module 5: Advanced Materials 4 Hrs.

1.Smart Materials-Introduction, Classification, Types, Applications.
2. Bio Materials- Introduction, Classification, Types, Applications.
3. Materials for sports- Introduction, Classification, Types, Applications.
4. Meta materials- Introduction, Classification, Types, Applications.
Module 6: Economic, Environmental and Social Issues in Material Science and 3 Hrs.
Engineering
Economic considerations. Environmental and societal considerations. Recycling issues.
Life cycle analysis and its use in design.

41
1. Describe different classes of materials and its classification methods.
2. Follow the influence of different mechanical properties in materials selection process for design
considerations.
3. Summarize applications of Composites, Ceramics and Polymers.
4. Summarize thermal and magnetic properties of materials.
5. Describe role of advanced materials in future technology development.
6. Follow newer environmental friendly technology for recycling of materials.

42
Title of the Course: Introduction To Geoscience 4BS103

L T P Cr
2 ----- ----- 2
Pre-Requisite Courses: -----
Textbooks:
1. Subinoy Gangopadhyay, ‘Engineering Geology’, Oxford University Press; Pap/Psc edition (March 18,
2013)
2. K. M. Bangar.,“Principles of Engineering Geology”, Standard Publishers Distributors 1705-B Nai Sarak,
Delhi, edition 2016
3. N. Chenna Kesavulu ,“Textbook of Engineering Geology”,Macmillian India Ltd. 2/10 Ansari Road
Daryanganj, New Delhi. Edition 2013
4. Parbin Singh,“Engineering and General Geology”, , S. K. Katariya and Sons, Delhi.,2013
References:
1. A. Holmes, “Principles of Physical Gelogoy”, ELBS Chapman and Hall, London.Edition
Dec.2016.
2. Dr. D. V. Reddy, “Engineering Geology”, Vikas Publishing; Second edition ,2017.
3. M. S. Krishnan, Geology of India and Burma, CBS Publishers & Distributers ,6th Edition
December 2009
4. D. N. Wadia, “Geology of India’, Forgotten Books Publisher, April 2018
5. Mead L. Jensen and Alan M. Bateman, “Economic Mineral Deposits”, John Wiley & Sons;
Revised 3rd Edition edition ,11 March 1981.
6. P.C. Jain & M.S. Anantharaman, “Palaeontology”, Vishal Publishing co., 2016
7. Umeshwar Prasad, “Economic Geology” CBS Publishers , 2nd edition, 2010.
8. A. I. Levorsen,”Geology of Petroleum” , CBS Publisher, 2nd Edition, 2006
9. U. Ashwathnarayana,”Principles of Nuclear Geology”, Routledge; 1 edition , 1985
10. Read, H. H.,” Rutley’s Elements of Mineralogy” Springer Netherlands, 2012
11. Tyrell, G. W., “Principles of Petrology” Aitbs Publishers And Distributors (2012)
12. M. Ramakrishnan and R. Vaidyanathan, “Geology of India Vol.-I&II” Geological society of

India, Bangalore, 2010.
Course Objectives :
1. Introduce students the necessary knowledge and concepts in the field of geology and to recognize
the synchronism between Geology and other branches of science.
2. Introduce the technique of recognizing and describing various geological features.
3. Enable students to illustrate and interpret geological phenomenon before its consideration in the
field of engineering.
43

level Descriptor
CO1 Recognize and describe the gross knowledge about the Earth and 02 Understanding
explain the geotectonic phenomenon.
CO2 Summarize different geological phenomenon and also know 02 Understanding
minerals/rocks and the usages of different ores.
CO3 Discuss the stratigraphy of geological formation and understand the 02 Understanding
lithological conditions and its importance.
CO-PO Mapping:
CO1 1 1 1
CO2 1 1 1
CO3 1 1 1
Assessments :
Teacher Assessment:
Assessment Marks
ISE 1 10
MSE 30
ISE 2 10
ESE 50
Course Contents:
Module 1: Geology and Geotectonics: Geology, branches of geology and its relation with 5 Hrs.
other sciences. Origin of the Earth, Earth as a member of solar system. Gross features of the
Earth. Brief idea about interior of the earth, core, mantle, crust. Concept and theory of Isostacy,
continental drift and plate tectonics.orogeny and epirogeny, types of mountains.
Module 2: Mineralogy and Petrology: Introduction to Mineralogy, definition of mineral, 5 Hrs.

common rock forming minerals viz. quartz, feldspars, olivine, augite, hornblende, mica, calcite.
Introduction to petrology. Study of igneous, sedimentary and metamorphic rocks. Common
rocks viz. granite, gabbro, rhyolite, basalt, shales and sandstone, limestone and laterite, schist,
gneiss, marble and quartzite.
Module 3: Structural Geology and Palaeontology: Earthquakes and volcanoes. Introduction 5 Hrs.
to geological structures viz. faults, folds, joints. Introduction to palaeontology, Definition and
scope of Palaeontology. Processes of fossilization.,Application of paleontological data in
economic geology, palaeoecology, evolution, stratigraphy.
Module 4: Economic Geology(Metals): Introduction to economic geology, Definition of ore, 5 Hrs.

ore minerals and gangue minerals, grades of ores and non-metallic minerals, assay value
and tenor of ore. Broad outline of ideas regarding classification of mineral deposits. Uses,
geological occurrences, origin and geographical distribution of the ore mineral deposits
44
viz. Iron, Lead, Zinc, Gold, Aluminum, Radioactive minerals,
Module 5: Economic Geology(Non-metals): Uses, geological occurrences, origin and 3 Hrs.

geographical distribution of Non-metals ( related to refractory, fertilizers, cement,
chemical, gemstone and electronic industry ) like- Asbestos, Barytes, Gypsum, Mica,
Graphite, Talc, Magnesite, Kyanite, Sillimanite, Monazite, Pyrite and Diamond and Rare
earth (RE) elements. Fossil fuel (oil and natural gas).
Module 6 : Introduction to Indian Stratigraphy: Physiographic divisions of India and their

characteristics, Rivers and mountains of India, Principles of stratigrphy, Geological time scale. 5 Hrs.
Introduction to Vindhyan Supergroup, Gondwana Supergroup and Deccan Trap systems with
respect to classification, geologic and geographic distribution, lithological characteristics,
fossil content and economic importance.

1. perceive and describe the gross knowledge of the Earth and Geotectonics.
2. describe the minerals and rocks with sense of mineralogy and petrology.
3. summarize the phenomenon in physical geology and explain the concepts of palaeontology.
4.describe and sense the knowledge of geology for economic purpose.
5.describe and sense the knowledge of of non-metallic minerals for economic purpose.
6.discuss the concepts of Indian Stratigraphy.

45
L T P Cr
Title of the Course: Life Science 4BS104
2 0 0 2
Pre requisite: NA
Textbooks:
1. T. S. Ranganathan, Text book of Human Anatomy, S. Chand and Company Ltd, 2002.
2. P. S. Verma and V. K. Agarwal, Concept of Cell Biology, S. Chand and Company Ltd, 2002.
3. R. D. Vidyarthi and P. N. Pandey, A Text book of Zoology, S. Chand and Company Ltd, 2004.
Reference Books:
1. Bruce Alberts and Alexander Johnson, Molecular Biology of the Cell Garland Science, Taylor &
Francis Group, 6th Edition, 2015.
2. Peter H. Raven, George B. Johnson, Biology, McGraw hill, 11th edition, 2017.
3. Laurence A. Cole, Biology of Life - Biochemistry, Physiology and Philosophy, Elsevier, 2016.
4. V. Sreekrishna, Comprehensive Biotechnology I - Cell Biology and Genetics, New Age, 2005.
Course Objectives:
1. Introduce students to modern aspect of life science.
2. Develop an understanding if scientific methods with a broad background in the life sciences at all
levels of biological organization (from molecular, cellular, and organismal biology, to populations,
communities and ecosystems)
3. Provide a foundation of basic biological principles aned education in life science technologies.
After the completion of the course the student should be able to Bloom’s Cognitive
CO
level Descriptor
Outline and describe cytological, biochemical, physiological and genetic
aspects of the cell,
Explain the structure and function of organ systems in the human body and
describe the concept, practice and significance of immunity.
Relate knowledge of Bio chemistry, Biotechnology and Bioinformatics with
application areas in Engineering.

46
CO-PO Mapping:
CO1
CO2
CO3 2
Assessments:
Teacher Assessment:
Two components of In-Semester Evaluation (ISE), One Mid-Semester Examination (MSE) and one
End-Semester Examination (ESE) having 20%, 30% and 50% weights respectively.
Assessment Marks
ISE 1 10
MSE 30
ISE 2 10
ESE 50

ESE: Assessment is based on 100% course content with60-70% weightage for course content (normally last
three modules) covered after MSE.

47
Course Contents:
Module 1 : Cell Biology Hrs.
Structure and function of prokaryotic (Typical Bacterial Cell) and eukaryotic cell (Plant cell and
animal cell) and intracellular organelles, Mechanism of cell division including (mitosis and meiosis) 03
and cell differentiation; Cell-cell interaction.
Module 2 : Bio Chemistry Hrs.
Structure of atoms, molecules and chemical bonds, Principles of physical chemistry,
Thermodynamics, kinetics, dissociation and association constants, Nucleic acid structure, genetic
code, replication, transcription and translation in prokaryotic and eukaryotic cell, Structure, function 04
and metabolism of carbohydrates, lipids and proteins, Enzymes and coenzyme.
Module 3 : Human Physiology Hrs.
a. Digestive system - Digestion, absorption, energy balance
b. Respiratory system: Comparison of respiration in different species, anatomical considerations,
transport of gases, exchange of gases, waste elimination, neural and chemical regulation of
respiration.
c. Neural system: Neurons, action potential, gross neuroanatomy of the brain and spinal cord, central
and peripheral nervous system, neural control of muscle tone and posture.
d. Excretory system: Comparative physiology of excretion, kidney, urine formation, urine 09
concentration, waste elimination, micturition, regulation of water balance, blood volume, blood
pressure, electrolyte balance, acid-base balance.
e. Cardiovascular System: Comparative anatomy of heart structure, myogenic heart, specialized
tissue, ECG – its principle and significance, cardiac cycle, heart as a pump, blood pressure,
f. Endocrinology and reproduction - Endocrine glands, basic mechanism of hormone action,
hormones and diseases; reproductive processes, gametogenesis, ovulation, neuroendocrine regulation
Module 4 : Immunity Hrs.
Antigen and Antibody: Introduction, definition and types of Antigens, Structure and functions of
different classes of immunoglobulins, Primary and secondary immune response, Lymphocytes and
04
accessory cells, Humoral and cell mediated immunity, Mechanism of immune response and
generation of immunological diversity; Application of immunological techniques.
Module 5 : Biotechnology And Its Applications Hrs.
Principles and process of Biotechnology: Genetic engineering (Recombinant DNA technology).
Application of Biotechnology in health and agriculture: Production of secondary metabolites/products:
Insulin, growth hormones: Indol acetic acid, interferons. Methods of gene transfer in plants, crop
04
improvement. Introduction to trangenics: gene therapy, Genetically modified organisms
Biosafety issues– Bio piracy.
Module 6 : Bioinformatics and its Applications Hrs.
Introduction and Definition of Bioinformatics, Molecular Bio informatics: Genomics, Proteomics
and Drug Design. Organic and Community Bioinformatics: Bioinformatics of species diversity.
Applications of Bioinformatics: Human health, Microbial genome application, Biotechnology, 04
Agriculture, Comparative studies.
Module wise measurable students learning outcomes
Module 1 : Cell Biology

Describe the intricate relationship between various cellular structures and their corresponding functions.
Explain the cytological, biochemical, physiological and genetic aspects of the cell, including cellular
processes common to all cells, to all eukaryotic, prokaryotic cells as well as processes in certain specialized
cells. Relate normal cellular structures to their functions.
Module 2 : Bio Chemistry

48
Outline structure of atoms, molecules and chemical bonds. Describe principles of physical chemistry,
thermodynamics and kinetics. Explain the structure, function and metabolism of carbohydrates, lipids and
proteins, Enzymes and coenzyme.
Module 3 : Human Physiology

Outline and describe structure and function of major organ systems in the human body, the neural system
and explain the transmission of signals in excitable cells.
Module 4 : Immunity
Identify major components of the immune system at organ, cellular and molecular levels and discuss normal
functions of these components during immune responses. Elucidate the relationship between major cellular
and molecular components of the immune system. Explain adverse functions of these cellular and molecular
components during abnormal circumstances. Describe mechanisms of diseases associated with adverse
functions of the immune system.
Module 5 : Biotechnology And Its Applications
Explain the theory and practice of recombinant DNA technology. Describe biocatalysis, pathway
engineering, bioprocess control and downstream processing and Identify the applications of Biotechnology.
Module 6 : Bioinformatics and its Applications
Outline the flow and regulation of biological information. Explain the techniques used to collect sequence
and expression data. Identify appropriate biological data bases for specific analyses and describe the
applications of Bioinformatics

49
Title of the Course: Engineering Chemistry Laboratory : L T P Cr

4CH151 0 0 2 1
Pre-Requisite Courses: : Chemistry course at secondary and higher secondary level
References:
1. Engineering Chemistry Laboratory Manual, Department of Chemistry WCE, Sangli.
2. J Mendham, R.C. Denney, J.D. Barnes, M.J.K Thomas, “Quantitative Chemical analysis”, Vogels,
Pearson Education, 2008, 6thEdition.
Course Objectives :
1. To make the student familiar with analytical techniques.
2. To provide hands on practice of titrimetric analysis.
level Descriptor
CO1 Apply principles of volumetry to quantitative analysis of water III Applying
quality parameter, metal and alloys. Demonstrate use of instrument
for quantitative analysis. Experiment physical/Chemical
characteristics of material
CO-PO Mapping :
IT:
CO1 1 1
Assessments : In Semester Evaluation (ISE)

Assessment Marks
ISE 100
On the basis of each experiment performed during regular laboratory session, quiz and performance of
experiment.
Course Contents:
List of experiments (Minimum 09) 2 Hrs

1. Estimation of hardness of water by EDTA method (Complexometric each
Titration).
2. Estimation of alkalinity of water (Neutralization Titration).
3. Estimation of Dissolved Oxygen in water (Iodometric Titration).
4. Estimation of Chloride content in water (Argentometry).
5. Demonstration of pH meter & pH metric titration.

50
6. Determination of strength of acid/base conductometrically.
7. Colorimetric estimation of Copper.
8. Estimation of copper from Bronze. (Iodometric Titration).
9. Estimation of Zn from Brass (Displacement Titration).
10. Determination of purity of Iron (Redox Titration).
11. Determination of viscosity of given liquid. By Ostwald viscometer.
12. Determination of corrosion rate by weight loss method
13. Gravimetric estimation of Ba from BaSO4 as BaO.

51
Title of the Course: Civil and Mechanics Laboratory 4CV151

L T P Cr
-- -- 2 1
Pre-Requisite Courses: Basic Civil Engineering and Engineering Mechanics
References:
1. Duggal S.K., “Surveying (Vol I)”, Tata McGraw Hill, 4th edition 2013
2. Bhavikatti., S. S. and Rajashekarappa., K. G. “Engineering Mechanics”, New Age

International Publishers,5th Edition,2015.
3. Khurmi. R. S., “Textbook of Applied Mechanics”, Tata McGraw Hill Publishing Company,
20th Revised Edition, 2013.
Course Objectives :
1. To impart necessary skills to conduct the experiments in surveying using conventional and modern
instruments and engineering mechanics.
2. To provide knowledge for conducting experiments to verify the principles of engineering mechanics.

level Descriptor
CO1 Demonstrate the use of instruments for the measurement of distance, III Applying
angle and levels.
CO2 Demonstrate the verification of laws of mechanics experimentally, III Applying
analytically and graphically.
CO-PO Mapping :
CO-PO Mapping with regards to B.Tech Information Technology Engineering Programme:
CO1 2 1 1
CO2 2 1
Assessments :
Teacher Assessment:
In Semester Evaluation (ISE), and End Semester Examination (ESE) having 50% weights each.
Assessment Marks
ISE 100
ISE is based on experimental work/performance in laboratory/assignment/declared test/etc.

52
Course Contents:
List of Exercises in Civil Engineering
1. Direct and Indirect Ranging (Line Ranger), Measurement of Horizontal Distances by using
chain and Tape,
2. Chain Survey, Setting of offsets by using open cross staff, French cross staff, and Indian
optical Square.
3. Chain and Compass Traversing.
4. Study of Digital Planimeter.
5. Study of Dumpy Level and determinationreduced levels.
6. Introduction to Modern Instruments.
List of Exercise in Engineering Mechanics:

1. Verification of Law of triangle of forces.
2. Verification of law of polygon of forces.
3. Determination of support reactions of simply supported beam.
4. Verification of the law of moments using Bell crank lever/Efficiency of Bell crank lever.
5. Graphical solution for concurrent and non-concurrent coplanar force system.
List of Drawings and Reports:
1. Preparation of Half Imperial Drawing Sheet showing types of lines, symbols of
Doors-windows, building materials, North line etc. according to IS 962.
2. Preparation of Half Imperial Drawing Sheet showing line plan of a single storey
Building.

53
Title of the Course: Workshop Practice 4ME152 L T P Cr
0 0 02 01
Textbooks:
1. Raghuwanshi B. S.,”A Course in Workshop Technology I”,Dhanapat Rai Publications,10th Ed.2009
2. S. K. Hajra Choudhury and A. K. Hajra Choudhary,“Workshop Technology” – Vol I [Manufacturing

Processes]”, , Media Promoters and Publishers Pvt. Ltd., 10th edition, reprint 2001
References:
1. W.A.J. Chapman, “Workshop Technology Volume I”, CBS Publishing & Distributors, Delhi. [ISBN-
13:9788123904016] 2001
2. Rao P.N., “Manufacturing Technology”, Vol. I and Vol. II, Tata McGrawHill House,2017.
Course Objectives :
1. To train the students to use different tools and equipments involved in the manufacturing processes.
2. To develop the skills to handle the basic machine tools and equipments required for various
manufacturing processes.
3. To prepare the students to carry out the various operations to make a finished product.
4. Train the students for making PCB for electronic applications.
CO After the completion of the course the student should be able t Bloom’s Cognitive
level Descriptor
CO1 Describe the methods, operations and processes of manufacturing II Understanding
CO2 Summarize the simple mechanical systems, machines, equipment’s, II Understanding

the basic working of cutting tools for manufacturing.
CO3 Use of chemical etching technique for making the PCB for III Applying
electronic applications.

54
CO-PO Mapping :
IT
a b C d e f g h i j k l
CO1 1
CO2 1
CO3 1
Assessments :Teacher Assessment:
100% ISE, Continuous assessment based on the experiments, demonstration performed in the lab and
followed by oral examination at the end of semester.
Assessment Marks
ISE 100
Course Contents:
1. Composite job based on carpentry, fitting, tin-smithy, welding etc. (16 Hrs.)
2. Composite job of PCB making based on negative film making, UV exposure, development and
etching etc. (8 Hrs.)
Module wise Measurable Students Learning Outcomes : Laboratory Outcomes
• Upon completion of this laboratory course, students will be able to fabricate components with their
own hands.
• They will also get practical knowledge of the dimensional accuracies and dimensional tolerances
possible with different manufacturing processes.
• By assembling different components, they will be able to produce small devices of their interest.
• By studying PCB making, students will able to make their own electronic circuits.

55
L T P Cr
Title of the Course: Physics for Computer Professionals 4PH103
3 - - 3
Pre-Requisite Courses: Students are expected to know the basic concept in Physics.
Textbooks: 1. M. N. Avadhanulu and P. G. Kshirsagar, “A Text book of Engineering Physics ” S.Chand
and Company, New Delhi. Revised edition 2014
2. R. K. Gaur and S. L. Gupta “Engineering Physics”, Dhanpat Rai Publications, New Delhi.
Edition: 2011
References:
1. Halliday, Resnic and Walker, “Fundamentals of Physics”, John Wiley, 9th edition 2011.
2. A. Beiser, “Concepts of Modern Physics”, McGraw Hill International, 5th edition, 2003.
3. Ajoy Ghatak, “Optics”, Tata McGraw Hill 5th edition, 2012.
4. P. M. Mathews, K. Venkatesan, “Text Book of Quantum Mechanics”, Tata McGraw Hill
2nd Edition, 2010
5. H. S. Kalsi, “Electronic Instrumentation”, Tata McGraw Hill, 3rd Edition, 2010.
Course Objectives:
1. To provide basic concepts to solve many engineering and technical issues.
2. To give deep insights into the understanding of engineering courses.
3. To encourage them to understand engineering and technical development.
Bloom’s Cognitive
level Descriptor
Describe optical phenomenon such as interference, diffraction
polarization and in terms of wave model. Explain the methods of
CO1 I Understanding
production and detection methods of ultrasonic waves and its
applications.
Explain Planck’s quantum hypothesis, Compton effect, Heisenberg’s
uncertainty principle, Schrödinger’s wave equations and their
applications; Discuss measurement and errors in measurement,
Explain various display devices, sensors and transducers.
Utilize fiber optics as a communication channel and apply in
communication system. Show how optical fiber implements as sensor,
CO3 connectors, couplers and their applications. Use the concepts of III Applying
transducer and sensor, Classify transducers, and sensors and their
applications.

56
CO-PO Mapping:
IT
CO1 1
CO2 1
CO3 1
Assessments:
Teacher Assessment: Two components of In-Semester Evaluation (ISE), One Mid Semester
Examination (MSE) and one End Semester Examination (ESE) having 20%, 30% and 50%
weights respectively.
Assessment Marks
ISE 1 10
MSE 30
ISE 2 10
ESE 50
ISE-1 and ISE-2 are based on assignment/declared test/quiz/seminar etc.

ESE: Assessment is based on 100% course content with 70-80% weightage for course content
(Normally last three modules) covered after MSE.
Course Contents:
Module 1: Optics 7Hrs.
Introduction, types of optics, diffraction, types of diffraction, Fresnel’s diffraction: Fresnel’s half
period zones, zone plate, diffraction at straight edge. Fraunhofer’s diffraction: diffraction due to
single slit, double slits, plane diffraction grating. Polarization: optical activity, specific rotation of
optical active substances, Laurent’s half shade polarimeter.
Module 2: Quantum Physics 8Hrs.
Introduction, black body radiation, Planck’s quantum theory, Wien’s displacement law and
Rayleigh – Jeans law, phase velocity, group velocity and particle velocity, de-Broglie’s hypothesis,
Compton effect: theory and experimental verification, Heisenberg’s uncertainty principle and its
applications, wave function and its physical significance, Schrödinger’s wave equation: time
independent and time dependent, applications of Schrödinger’s wave equation.
Module 3: Ultrasonics 6Hrs.
Introduction, classification of sound, ultrasonic waves, generation of ultrasonic waves
(Magnetostriction and Piezoelectric method), detection of ultrasonic waves by Kundt’s tube,
thermal detection and sensitive flame method, velocity of ultrasonic waves in liquid, applications
of ultrasonic waves in scientific and engineering field.
6Hrs.

57
Module 4: Communication channel

Introduction, types of communication channel, wired: twisted pair, co-axial, and optical fiber,
optical fiber: types, acceptance angle and numerical aperture, fiber optics communication, optical
fiber sensors, optical fibre connector, optical fiber couplers and application. Wireless channels:
terrestrial microwave, satellite microwave.
Module 5: Measurement and Display Devices 7Hrs.
Introduction, Measurement: qualities of measurements, static characteristics, errors in
measurement, types of error, statistical analysis. Display devices: LED, LCD, gas discharge plasma
display, segmented gas discharge display, Segmental display using LED, dot matrix display, bar
graph display, electro luminescent display, incandescent display, electrophoretic display, liquid
vapor display.
Module 6: Computer Instrumentation 6Hrs.
Introduction, instrumentations, measurement system, control system, Transducer and Sensor:
transducers, sensors, classification of transducers, characteristics of transducers, selection criterion
for transducers, temperature transducers, strain gauge, pressure transducers, force transducers,
optical transducers, actuators.
1. Module-1: describe Fresnel’s and Fraunhofer type diffraction, polarization and
applications in technological field.
2. Module-2: use the concepts of quantum mechanics and apply for solving the problems.
3. Module-3: acquire the knowledge of ultrasonic waves and implement in various fields.
4. Module-4: explain the types of communication channels and acquire the knowledge of
optical fiber for advance communication.
5. Module-5: know the correct measurement of physical quantities and get the knowledge
of different display devices.
6. Module-6: distinguish between sensors and transducers, and use in the proper system for
controlling the desired physical quantities

58
Title of the Course: Engineering Mathematics II 4MA102

L T P Cr
3 1 - 4
Pre-Requisite Courses:Mathematics course at Higher Secondary Junior College
Textbooks:
1. P. N. and J. N. Wartikar, “A Text Book of Applied Mathematics”, Vol I and II”, Vidyarthi Griha
Prakashan, Pune, 2006.
2. B .S. Grewal , “Higher Engineering Mathematics”, Khanna Publication, 44th Edition , 2017.
3. S.C. Gupta, “Fundamentals of Mathematical Statistics and probability”, Sultan chand &Sons,2014.
References:
1. Erwin Kreyszig, “Advanced Engineering Mathematics”, Wiley Eastern Limited Publication, 2015,
10th Edition.
2. Wylie C.R, “Advanced Engineering Mathematics”, Tata McGraw Hill Publication, 8th Edition,
1999.
3. H. K. Dass , “Higher Engineering Mathematics”, S. Chand & Company Ltd., 1st Edition 2014.
4 S. S. Sastry, “Engineering Mathematics (Volume-I)”, Prentice Hall Publication, 3rd Edition 2006.
Course Objectives :
Familiarize the students with techniques in multivariate integration and statistics. .
able to
level Descriptor
CO1 Apply computational tools to solve mathematical and III Applying
statistical problems.
CO2 Solve problems in probability, statistics and multivariable III Applying
calculus.
CO-PO Mapping :
IT:
CO1 2 1
CO2 2 1

59
Assessments :
Teacher Assessment:
Assessment Marks
ISE 1 10
MSE 30
ISE 2 10
ESE 50
Course Contents:
Module 1: Beta-Gamma Functions: 5Hrs.

Definition of Beta, Gamma functions and properties of Beta Gamma functions.
Module 2: Multivariable Calculus: 10Hrs.
Multiple Integrals: Double integrals, change of order of integration, change of variables
(Cartesian to polar) Evaluation of triple integrals, Application of Multiple integrals such
as Area enclosed by plane curves, Mass of lamina, Volume of solid.
Module 3: Numerical Solution of Ordinary Differential Equations of first order 6Hrs.

and first degree:
Numerical Solution by (i) Picard’s Method (ii) Taylor’s series method (iii) Euler’s
method (iv) Modified Euler’s method (v) Runge- Kutta fourth order method.
Module 4: Probability theory: 6 Hrs.
Introduction, Sample Space, Events, Axioms of probability, Conditional probability
Baye’s Theorem.
Module 5: Statistics: 6 Hrs.
Correlation, Linear Regression, Curve-fitting: (a) straight Line (b) parabolic curve (c)
exponential curve (d) logarithmic curve.
Module 6: Probability Distribution: 7Hrs.
Random Variable, Binomial distribution, Poisson distribution, Normal distribution.
Module wise measurable students learning outcome:

Module 1: Beta-Gamma Functions:

Solve complicated integrals with the help of Beta-Gamma functions.
Module 2: Multivariable Calculus:
Explain and solve the integral of physical phenomena when it depends on several variables
Module 3: Numerical Solution of Ordinary Differential Equations of first order and first degree:
Solve different numerical methods of ordinary differential equation of first order and first degree.
Module 4: Probability theory:
Solve various problems in probability theory.

60
Module 5: Statistics:
Fit the curve using given data.
Module 6: Probability Distribution:
Solve various problems in probability distribution.
Tutorial:
During the tutorial we will ensure that the students have properly learnt the topics covered in the
lectures. This shall include assignment , quiz, surprise test or declare test. The teacher may add another
activity.

61
Title of the Course: Basic Mechanical Engineering 4ME101

L T P Cr
2 0 0 2
Textbooks:
1. Agarwal, C. M. “Basic Mechanical Engineering”, Wiley India Pvt. Ltd., 2014
2. Vasandani V. P. and Kumar D. S., “Heat Engineering”, Metro Politian Book Company, 2nd Edition,
1975.
3. Hajra Choudhury S. K.,“Workshop Technology” – Vol II [Machine Tools]”, Media Promoters and
Publishers Pvt. Ltd., Tenth edition, reprint 2001
References:
1. Nag P. K,. “Thermodynamics”, Tata McGraw Hill Publication, 3rd Edition, 2006
2. Rajput R.K, “Thermal Engineering”, Laxmi Publication 2010.
Course Objectives :
Interpret the systems of conventional and non-conventional power plants.
1. Prepare the student to summarize concepts of basic mechanical systems and thermodynamics.
2. Discuss the properties of steam and its behavior with temperature and pressure.
3. Identify the power transmission, bearing and lubrication systems.
4. Introduce different manufacturing processes and machine tools for applications.
able to
level Descriptor
CO1 Interpret the various terms related to energy generation, II Understanding
mechanical system, thermodynamic systems, manufacturing
processes and machines
CO2 Describe thermodynamic system, power producing/absorbing/ II Understanding
transmission devices and manufacturing processes/machines.
CO3 Distinguish the various energy generation, power transmission, II Understanding
mechanical systems, operations/machines involved in
production processes.
CO4 Calculate the operating and geometric parameters in III Applying
thermodynamics and power transmission systems

62
CO-PO Mapping :
FY B.Tech Information Technology
CO1 1 1
CO2 1 1 1
CO3 1 1 1
CO4 1 1
Assessments :
Teacher Assessment:
Assessment Marks
ISE 1 10
MSE 30
ISE 2 10
ESE 50
Course Contents:
Module 1: Conventional and Non-Conventional Power Plants 5Hrs.
Steam power plant, Hydro power plant, solar thermal power generation system, Four Stroke
and Two Stroke Petrol & Diesel Engines. Diesel Power Plant, Wind power plants, Nuclear
power plant.
Module 2: Study of Mechanical systems 4 Hrs.
Pumps, Compressors, Refrigeration/Air conditioning system, Hydraulic and Pneumatic
systems.
Module 3: Basic Thermodynamics 5Hrs.
First Law & Second Law of Thermodynamics. Gas Processes Carnot Cycle, Otto cycle, Joules
Cycle, Air Standard efficiency, Numericals on above.
Module 4: Properties of steam 4Hrs.
Introduction, Steam formation, Different forms of Steam, Enthalpy, Specific volume of steam
and dryness fraction of steam, Internal energy. Simple numerical by using Steam Tables.
Module 5: Power Transmission 5Hrs.
Belt drives, Chain drives and gears drives, (Numerical’s on belt tensions, gear ratio, and
velocity ratio), Couplings and their types. Function of bearings, Basic types of bearings,
Lubrication.
Module 6: Manufacturing Processes 5Hrs.
Metal casting processes- (Die casting, Sand casting), Metal forming processes- forging,
rolling, extrusion, drawing. Metal cutting operations- turning, drilling, milling, boring,
reaming, shaping, gas cutting etc. Metal joining processes- welding, riveting, soldering and
brazing.
Student should be able to

63
1. Summarize the Conventional and Non-Conventional Power plants and its functioning.
2. Describe and demonstrate the various mechanical systems.
3. Explain fundamental concepts of thermodynamics from engineering point of view.
4. Obtain and use the properties of steam and other parameters using standard steam tables.
5. Interpret the working of power transmission system, its types and solve some simple numerical related
to design.
6. Relate different production processes commonly used in industries.

64
Title of the Course: Basic Electrical Engineering 4EL101 L T P Cr

2 -- -- 2
Textbooks:
1. D.C. Kulshreshtha, “Basic Electrical Engineering”, 1st revised edition McGraw Hill, 2012.
2. D. P. Kothari and I. J. Nagrath, “Basic Electrical Engineering”, Tata McGraw Hill, 2010.
References:
1. V. D. Toro, “Electrical Engineering Fundamentals”, Prentice Hall India, 1989.
2. E. Hughes, “Electrical and Electronics Technology”, Pearson, 2010.
3. V. N. Mittle and Arvind Mittal, “Basic Electrical Engineering”, 2nd edition TMH, 2006.
Course Objectives :
1. This course intends to summarize and solve electrical and magnetic circuits.
2. It imparts skill to identifying principles, construction and working of electrical machines.
3. It develops skill to describe the wiring system, lamps and low voltage installation components.

CO After the completion of the course the student will be able to Bloom’s Cognitive
level Descriptor
CO1 Explain principles, construction and working of electrical 2 Understanding
machines.
CO2 Solve electrical and magnetic circuits. 3 Applying
CO-PO Mapping:
IT
CO1 1 1
CO2 1 1
CO3 1 1

65
Assessment:
Assessment Marks
ISE 1 10
MSE 30
ISE 2 10
ESE 50
discussion.[One assessment tool per ISE. The assessment tool used for ISE 1 shall not be used for ISE 2]
Course Contents:
Module 1: DC Circuits Hrs.
Review of R-L-C- Electrical circuit elements, KCL and KVL. Star- delta conversion, voltage
and current sources. Magnetic circuits, equivalence of heat and power. Thevenin, Norton and 4
Superposition Theorems.
Module 2: AC Circuits
Representation of sinusoidal waveforms, peak, RMS values, phasor representation real,
reactive and apparent power. Analysis of single-phase, ac circuits consisting of R, L, C, RL,
4
RC, RLC (series and parallel) circuits and three-phase balanced circuits. Voltage and current
relations in star and delta.
Module 3: DC Machines Hrs.
Construction, working principle and types of DC generator and Motor. Voltage and speed
control methods, Speed-Torque characteristics. Principle, construction, working and 4
application of stepper, servo and universal motors.
Module 4: Transformers Hrs.
Construction, working principle and types of single-phase transformer, open circuit and short
circuit tests: Losses, efficiency, all-day efficiency and regulation. Autotransformer Three- 6
phase transformer construction and connections.
Module 5: AC Machines Hrs.
Construction and working principle of single and three- phase induction motor. Types,
torque- speed characteristics and applications of induction motor, Types of starters, AC 4
generator.
Module 6: Wiring, Electrical Installations and Components of LT Switchgear Hrs.
Switch fuse unit, MCB, ELCB, MCCB. Types of wire and cables. Staircase, Godown and 4
Domestic wiring, CFL, LED, Fluorescent tube. Lighting schemes, Earthing, types of
batteries, characteristics of batteries.

66
Module wise Measurable Students Learning Outcomes:

After completion of the course students will be able to:
1. Explain the KVL and KCL to solve electric and magnetic circuit.
2. Explain fundamentals of AC circuit.
3. Describe construction and working of DC machine.
4. Summarize construction and working of single- phase transformer and three- phase transformer.
5. Describe three- phase and single- phase Induction Motor with application.
6. Recognize wiring, illumination, supply system and installation components.

67
Course Name: Basic Electronics Engineering 4EN101 L T P Cr

2 0 0 2
Pre-Requisite Courses: 12th Physics
Textbooks:
1. R. P. Jain, “Modern Digital Electronics”, Tata McGraw Hill, 4th edition 2009
2. A. Anand Kumar, “Fundamentals of Digital Design”, PHI, 4th edition 2016
3. Robert Boylestad, Louis Nashelsky, “Electronic Devices and Circuits, Pearson, 11th edition, 2015
4. Ramakant Gaikwad, “Op-amp and Linear Integrated Circuits”, Pearson,4th edition,2015
References:
1. Morris Mano, “Digital Design”, Pearson, 4th edition, 2011
2. Donald A. Neamen, “Electronic Circuit Analysis and Design”, Tata McGraw Hill, 3rd edition, 2011
3. Robert F. Coughlin and Frederick F. Driscoll, “Operational amplifiers and linear integrated circuits”,
PHI, 6th edition, 2009
Course Objectives: The aim of this course is to provide knowledge of basic electronics to first year
engineering students, so that they can understand, design and implement small digital / analog electronic
circuits.

After the completion of the course the student should be able Bloom’s Cognitive
COs
to Level Descriptor
CO1 explain fundamentals of digital electronics. II Understanding
CO2 use logic gates, diodes and transistors based circuit. III Applying
CO3 construct small application circuits using opamp and IC 555. III Applying
CO-PO Mapping:
IT
CO1 1 1
CO2 1 1
CO3 1 1
Assessments:
Teacher Assessment:
Assessment MarksEvaluation
ISE 1 10 Based on assignments/declared tests/quizzes/seminar etc.
MSE 30 Assessment is based on 50% of course contents.
ISE 2 10 Based on assignments/declared tests/quizzes/seminar/ mini-project etc.
Assessment is based on 100% course contents with 70-80% weightage for
ESE 50
course contents covered after MSE.
Course Contents: Hours
Module 1: Fundamentals of Digital Electronics
68
Number systems and arithmetic operations, logic gates, Boolean algebra, SOP and POS terms,
K-map reduction technique, converting AOI to NAND/NOR logic 5
Module 2: Combinational and Sequential Circuits
Combinational Circuits: half adder and subtractor, 1-bit full adder and subtractor, 1-bit and 2-bit
comparator, BCD and gray code, binary to gray code converter, gray to binary code converter, 5
Sequential Circuits: flip-flops, counters.
Module 3: Semiconductor Diode and its Applications
PN junction diode, diode characteristics, types of diode, diode as Switch, diode circuits: half-
wave and full-wave rectifier, zener diode as voltage regulator, clippers and clampers.
5
Module 4: Basics of Transistor

Transistor structure, types (BJT and FET), transistor configurations, biasing methods, transistor
as a switch, BJT amplifier, JFET amplifier, Introduction to MOS transistor. 5
Module 5: Operational Amplifier

Amplifier fundamentals, basic op-amp configuration, op-amp powering, feedback in op-amp
circuits, ideal op-amp circuits analysis, inverting, non-inverting amplifier, summing amplifier, 5
difference amplifier, unity gain buffer
Module 6: IC555
IC555 timer: Block diagram, construction and working of astable and monostable multivibrator
using IC555 3
Module wise Measurable Students Learning Outcomes:
Module 1: explain fundamentals digital electronics.
Module 2: use logic gates based circuits.
Module 3: illustrate applications of semiconductor diode.
Module 4: illustrate use of transistor as a switch and amplifiers.
Module 5: construct op-amp based electronic circuits.
Module 6: construct IC 555 based electronic circuits.

69
Title of the Course: English for Professional Communication 4HS101 L T P Cr

Course Code : 2 1 0 3
Pre-Requisite Courses: Higher Secondary Level
Textbook:
References:
Authors, title of books in Italics, Publisher, Edition, year of Publication
1. K.R.Laxminarayanan, English for Technical Communication, Scitech, Sixth Edition, 2008
2. William Sanborn Pfeiffer ,T.V.S. Padmaja ,Technical Communication: A Practical Approach,

Pearson, Sixth Edition 2012
3. A.K.Jain, Praveen Bhatia, A.M.Shaikh, Professional Communication Skills, S. Chand and Co: Fifth
edition ,2009
4. Ashraf Rizvi ,Effective Technical Communication, Tata McGraw Hills publishing Company 2006
5. F.T.Wood,Remedial English Grammar, Macmillan, 2007
6. Andrea J.Rutherford,Phd. Basic Communication Skills for Technology, Pearson Education Asia,2001
7. Exercises in Spoken English, Parts 1 and II CIEFL, Hyderabad , Oxford University Press
8. Sanjay Kumar, Pushplata , Communication Skills, Oxford University Press, First edition ,2012
Course Objectives :
• Inculcate the importance of Technical English Communication Skills
• Enhance their communicative competence
• Enable the students to communicate with clarity and precision
• Prepare the students to acquire structure and written expression required for their profession and
enable them to acquire proper behavioral skills

70

After completing this course students will be able to:
1. Communicate clearly, precisely and competently in different scenario.
2. Demonstrate the information through oral, written and graphic messages.
3. Acquire basic proficiency in English including reading and listening comprehension, writing and
speaking skills.
Bloom’s Cognitive
Level Descriptor
CO1 Communicate clearly, precisely and competently in different scenario III Applying
Demonstrate the information through oral , written and graphic
messages
Acquire basic proficiency in English including reading and listening
CO3 comprehension ,writing and speaking skills III Applying
CO-PO Mapping :
IT
CO1 3
CO2 3
CO3 3
Assessments :
Teacher Assessment:
Assessment Marks
ISE 1 10
MSE 30
ISE 2 10
ESE 50
Course Contents:
Module 1: Sentence Structure and Vocabulary Building 5Hrs.
1. Subject Verb Agreement
2. Modal verbs
3. Question tags

71
4. Connectives
5. Synonyms, Antonyms, and Standard abbreviations
6. Redundancies
7. Misplaced Modifiers
8. Passives
Module 2 : Fundamentals of Communication

1. Features and Functions
2. Importance of Communication
3. The Communication Process
4. Barriers and Breakdown of Communication
5. Communication in an Organization
3Hrs.
i. Upward communication
ii. Downward communication
iii. Horizontal communication
iv. Diagonal communication
v. Informal communication / Grapevine communication
Module 3 : Nature and Style of Writing

1. Describing
2. Defining
3. Classifying
3Hrs.
4. Providing examples or evidence
5. Writing Introduction and Conclusion
Module 4 :
A. Non Verbal Communication
1. Kinesics or Body Language
2. Proxemics : Space Distance
3. Haptic 2Hrs.

72
4. Vocalic : Paralinguistic features
i. Pitch
ii. Volume
iii. Pauses
iv. Rate of words/minute
5.Chronemics
6.Nonverbal Barriers 2Hrs
B. Listening Skills
1. Process of Listening
2. Types of Listening
3. Barriers to effective Listening
Module 5 :
A. Oral Communication
1. Speeches for different Occasions ( Welcome Speech , Introductory Speech, Vote of
4Hrs.
Thanks Speech )
2. Group Presentations
3. Group Discussions
4. Individual Presentations
5. Job Interviews
B. Basics of Phonetics
1. Improper Pronunciation
2. Classification of Sounds in English
3. Word Stress
1Hr
4. Sentence Stress or Intonation
5. Pronunciation and Articulation
Module 6 : Writing Communication 2Hrs

A. Basic Writing Skills :
1. Paragraph Writing
2. Comprehension
3. Essay Writing
4. Sentence Structures
5. Use of phrases & clauses in sentences
6. Importance of proper punctuations 2Hrs

73
7. Creating coherence
8. Organising the principles of paragraphs in documents 2Hrs

9. Techniques for writing precisely
B. Business Correspondence : 2Hrs

1. Job Applications
2. Complaint Letters and Adjustment Letters
3. Inquiry and Order
C. Official Correspondence :
1. Memorandums
2. Circulars
3. Notices
D .Report Writing :
1. Individual Report
2. Lab Report
3. Inspection Reports

Module 1: Construct different types of sentences
Module 2: Communicate effectively and avoid barriers
Module 3: Understand the different styles of writing.
Module 4: Demonstrate the advantages and limitations of non verbal Communication
Module 5: Acquire proficiency in technical English and communicate confidently in different
Formal situations.
Module 6: Write effective paragraphs, reports, letters and practice written communication
effectively.
1. Enrich their Vocabulary.
2. Improve their sentence structure.
3. Communicate confidently in different formal situations.
Tutorial: Computer Usage / Lab Tool :

Language lab activities are conducted on computers
Laboratory Experiences:
1. Listening and reading skills improved
2. Thinking and concentration are developed
Independent Learning Experiences:
Students prepare for Seminars, presentations, Group Discussions and also Written Tests confidently.

74
Title of the Course: Engineering Physics Laboratory 4PH151 L T P Cr

- - 2 1
Pre-Requisite Courses: Students are expected to know the basic practical knowledge in HSC Level.
Textbooks: 1. C. L. Arora “Practical Physics” S. Chand & Co Edition 2009.

2. P.R. Sasi Kumar “Practical Physics”, PHI Learning Pvt.Ltd 1st edition 2011.
References:
1. Halliday, Resnic and Walker, “Fundamentals of Physics”, John Wiley, 9th edition 2011.
2. A. Beiser, “Concepts of Modern Physics”, McGraw Hill International, 5th edition, 2003.
3. Ajoy Ghatak, “Optics”, Tata McGraw Hill 5th edition, 2012.
Course Objectives:
1. To gain practical knowledge by applying the experimental methods to correlate with the
Physics theory.
2. To learn the usage of electrical and optical systems for various measurements.
3. To Apply the analytical techniques and graphical analysis to the experimental data.
Bloom’s Cognitive
level Descriptor
Calculate the diameter of the thin wire, wavelength of light, Planck’s
constant, values of e/m of an electron, Specific rotation of optical
CO1 active substances. Demonstrate Hartley and Colpitt’s oscillator with III Applying
their simulations, Newton’s ring, and I-V characteristics of
semiconductor diode. Kundt’s tube.
CO-PO Mapping :
IT:
CO1 1 1
Assessments: : In Semester Evaluation (ISE)
Assessment Marks
ISE 100
On the basis of each experiment performed during regular laboratory session, performance of
experiment, quiz or oral, and final internal practical examination.

75
Course Contents:
List of Experiments (Minimum 8 experiments from the following list) 2 Hrs.

each
1. Find the diameter of the thin wire by diffraction of the light Expt.
2. Determination of wavelength of light by plane diffraction grating.
3. Determine the Specific rotation of sugar solution
4. Find the wavelength of He-Ne Laser using Plane diffraction grating.
5. Find the e/m for the cathode rays
6. Verify the expression for the resolving power of a telescope.
7. Measure the wavelength of ultrasonic waves by Kundt’s tube method.
8. Design and simulate Colpitt’s & Hartley Oscillator.
9. Determine the Planck’s constant.
10. Find the wavelength and velocity of ultrasonic waves in liquid.
11. Study the I-V characteristic of semiconductor diode.
12. Newton’s ring: Determination of wavelength of light and refractive index of

liquid.

76
Course Name: Electronics Engineering Lab 4EN151 L T P Cr

0 0 2 1
Textbooks:
1. R. P. Jain, “Modern Digital Electronics”, Tata McGraw Hill, 4th edition, 2009
2. A. Anand Kumar, “Fundamentals of Digital Design”, PHI, 4th edition, 2016
3. Robert Boylestad, Louis Nashelsky, “Electronic Devices and Circuits, Pearson, 11th edition, 2015
4. Ramakant Gaikwad, “Op-amp and Linear Integrated Circuits”, Pearson,4th edition, 2015
References:
1. Morris Mano, “Digital Design”, Pearson, 4th edition, 2011
2. Donald A. Neamen, “Electronic Circuit Analysis and Design”, Tata McGraw Hill, 3rd edition, 2011
3. Robert F. Coughlin and Frederick F. Driscoll, “Operational amplifiers and linear integrated circuits”,
PHI, 6th edition, 2009
Course Objectives:
The aim of this course is to provide knowledge of basic electronics to first year engineering students, so
that they can understand, design and implement small digital / analog electronic circuits.
Bloom’s Cognitive
COs After the completion of the course the student should be able to
Level Descriptor
CO1 identify electronics components and instruments. II Application
CO2 construct digital IC, diode and op-amp based circuits. III Analyzing
CO-PO Mapping :
IT:
CO1 1 1
CO2 1 1
Assessments :
Teacher Assessment:
100% ISE, Continuous assessment based on lab performance, quiz related with experiments, circuit
simulation task given in groups and oral at the end of semester
Assessment Marks Evaluation
20 Continuous Assignment Evaluation
Continuous Performance Evaluation based on declared tests /quizzes /mini project
50
ISE /seminar etc.
Final performance lab test conducted at the end of semester (Implementation and
30
Oral)

77
Course Contents:
Experiment List: (Minimum 13 Lab sessions)
1) Identification of components and instruments required in lab to perform experiments based on
Electronics.
2) Verification of truth table of all logic gates.
3) Realization of logic gates using basic building block (NAND/NOR).
4) Implementation of combinational logic circuit.
5) Study of P-N Junction diode characteristics
6) Working of Half-wave rectifiers
7) Working of Full-wave rectifiers
8) Working of clipper
9) Working of clampers
10) Study of transistor as a switch and amplifier (BJT and JFET)
11) Study of inverting and non-inverting amplifier (IC 741)
12) Implementation of opamp based application (Adder / Subtractor)
13) Working of multivibrator using IC 555 (Astable and Monostable)
Measurable Students Learning Outcomes based on above experiments:
1) identify and handle electronic components, ICs and instruments
2) implement and test diode, transistor and opamp based circuits
3) identify use of diode, transistor and opamp in various applications
4) apply knowledge to deal with electronic circuitry
Computer Usage / Lab Tool: Proteus Simulator, Analog / Digital Trainer kit, Digital Oscilloscope, Signal
Generator, Multimeter and DC power supply.

78
Title of the Course: Programming in C 4IT 151 (For IT Students

Only) L T P Cr
0 0 4 2
Pre-Requisite Courses: Basic course of software and hardware programming.
Textbooks:
1. Byron Gottfried, Schaum's, “Outline of Programming with C”, McGraw-Hill, Third edition, 2017.
2. Yashavant Kanetkar, “Let Us C”, BPB Publication, Fifteenth edition, 2016.
3. E. Balagurusamy, “Programming in ANSI C”, Tata McGraw-Hill Education, Seventh edition, 2016.
References:
1. Brian W. Kernighan and Dennis M. Ritchie, “The C Programming Language”, Prentice Hall of India,
Second Edition, 2015.
Course Objectives :
• To develop problem-solving skills to translate text described problems into programs written using
the Programming language with the help of language constructs.
• To impart knowledge on general principles of computer languages such as: conditional branching,
loops, block structures, functions, and input/output.

level Descriptor
CO1 Explain the basics of computer programming. II Understanding
CO2 Develop logic for algorithm and program. III Applying
CO3 Apply programming skill to solve simple problems in computer III Applying
science domain.
CO-PO Mapping :
Information Technology:
PO and
PSO
PO10
PO11
PO12
PSO1
PSO2
PO1
PO2
PO3
PO4
PO5
PO6
PO7
PO8
PO9
CO1 - 1 1 - - - - - - - - - - -
CO2 - 2 - - - - - - - - - - 1 -
CO3 - - 2 - 1 - - - - - - - 2 -
1 – Low, 2 – Medium, 3 – High
Assessments :
Teacher Assessment:
In Semester Evaluation (ISE)
Assessment Marks
ISE 100
ISE Type Marks
Continuous Assignment and submission 40
Practical performance and oral 30
Test (Surprise/ declared/ quiz) 30

79
ISE is based on performance of student in laboratory, experimental write-up, presentation, oral, and test
(surprise/ declared/ quiz). The course teacher shall use at least two assessment tools as mentioned above for
ISE.
Course Contents:
Module 1: Introduction to Programming T:1 P:2
Introduction to Programming (Flow chart/pseudocode, compilation etc.), Constants,
Variables (including data types). Storage classes like extern, auto, register, static, scope
rules
Assignments:
Assignments to be carried out in any IDE (Integrated development environment) like Code
Blocks, Sublime Text Editor, Turbo C editor and NetBeans for C/C++ Development.
1. Draw flowchart.
2. Programs to display different data type value and size.
Module 2: Arithmetic expressions and precedence T:2 P:4

Arithmetic, relational and logical operators, increment and decrement operators,
conditional operator, bit-wise operators, assignment operators, expressions, type
conversions, conditional expressions, precedence and order of evaluation.
Assignments:
1. Programs to solve simple computational problems using arithmetic expressions e.g.
simple and compound interest.
2. Programs to demonstrate different operators and their order precedence.
Module 3: Conditional Branching and Loops T: 2 P :4

Statements and blocks, if and switch statements, Loops- while, do-while and for
statements, break, continue.
Assignments:
1. Programs to demonstrate problems on conditional branching
2. Programs to show different types of iteration / loop.
Module 4: Arrays, Functions and Recursion T:3 P: 6

Arrays- concepts, declaration, definition, accessing elements, storing elements, arrays and
functions, two-dimensional arrays, applications of arrays.
Designing structured programs, Functions basics, parameter passing, block structure, user
defined functions, Recursion with examples
Assignments:
1. Programs to demonstrate matrix problems, string operations, sorting problems.
2. Programs to implement numerical methods problems (Root finding, numerical

differentiation, and numerical integration): using array, function and recursion.
Module 5: Pointers and Structures T: 3 P: 6

Pointers- concepts, initialization of pointer variables, pointers and function arguments,
address arithmetic, Character pointers and functions, pointers to pointers.
Derived types- structures- declaration, definition and initialization of structures, accessing
structures, nested structures, arrays of structures, structures and functions, pointers to
structures, self-referential structures, unions.

80
Assignments:
1. Programs to illustrate use of pointer with simple data type (create pointer variable,
assign value, access value and show address using (* and &).
2. Programs to solve the problems using pointers and structures e.g. swap two
numbers.
Module 6: File handling T: 2 P: 4

Input and output - concept of a file, streams, standard I/O, Formatted I/O, file I/O
operations. Graphics: Basic Shapes
Assignments:
1. File handling: Study and implementation file operations.
2. Programs to demonstrate simple read and write operation on the external text file.
3. Program to draw basic shapes using graphical functions.

Module 1 : Explain basics of representation of problems..
Module 2: Solve basic mathematical problems using arithmetic expression and logical operators.
Module 3: Implement conditional branching, iteration and recursion.
Module 4: Utilize the functions to decompose problems.
Module 5: Illustrate the problem solution using structure, pointer.
Module 6: Demonstrate the use of file handling functions.

81
Academic Rules and Regulations (V1.6)

[UG]
(After 5th Academic Council Meeting)

82
Preface
Walchand College of Engineering, (WCE), Sangli is one of the oldest and renowned
Engineering colleges in India. The college was established with an objective to provide
quality technical education, research and training. WCE is recognized by its contribution to
technical education, and involvement of its alumni in designing, planning and execution of
engineering projects of national importance. It has established a firm foundation for technical
education and research with a high-quality faculty and ethically sound disciplined alumni.
The teaching-learning process is student centric and governed by the concept of outcome
based education.
This booklet gives comprehensive information on the existing rules and regulations
for B. Tech. programmes of all branches. All undergraduate programmes will be governed by
these rules and regulations. The various departments are given a direction to excel in
academics through these rules and regulations approved by the academic council from time to
time, keeping in view the ever growing challenges and new developments. The stakeholders
particularly the students, and parents/guardians, are advised to be fully familiar with the
academic system of the college. Students should know the rules and regulations governing
academic requirements, evaluation system, and grading system. These rules and regulations
related to academics evolved over the period of time, after the college was awarded
autonomy in 2007 by UGC. These rules are also changed from time to time as per the
directives of UGC, AICTE and also by studying the rules of other reputed autonomous
institutes. It is expected that this booklet will bring the transparency in the functioning of the
college related with academics amongst students, faculty members, administrator, parents and
other stakeholders. WCE, Sangli has student oriented academic system, every possible
opportunity is provided to progress academically, and overall development of the students is
ensured.
Date: 11th July 2016 Dean Academics Director

Release of V 1.6

83
INDEX
1. DEFINITIONS ................................................................................................................. 85
2. INTRODUCTION ............................................................................................................ 86
3. ORGANIZATION STRUCTURE AND ACADEMIC DEPARTMENTS ..................... 87
4. ADMISSION .................................................................................................................... 88
5. ACADEMIC CALENDAR .............................................................................................. 91
6. ATTENDANCE ............................................................................................................... 91
7. CURRICULUM................................................................................................................ 92
8. REGISTRATION ............................................................................................................. 96
9. COURSE EVALUATION ............................................................................................... 96
10. THE GRADING SYSTEM .............................................................................................. 98
11. CALCULATION OF PERFORMANCE INDICES ...................................................... 104
12. SEMESTER GRADE REPORT ..................................................................................... 106
13. AWARD OF DEGREE .................................................................................................. 106
14. AWARD OF MEDALS.................................................................................................. 106
15. COMMITTEES AND FUNCTIONARIES .................................................................... 107
16. DISCIPLINE AND CONDUCT .................................................................................... 112
17. CONCLUSIONS ............................................................................................................ 112

84
1. DEFINITIONS
1. “College” means Walchand College of Engg., Sangli (WCE).

2. “BoG" means Board of Governors (Administrative Council).
3. “University” means Shivaji University, Kolhapur.
4. “Academic Council (AC)" means apex academic body governing the academic
programmes and policies in WCE.
5. “Grievance Redressal and Discipline Committee (GRDC)" means committee
appointed by Director to deal with cases of indiscipline.
6. “Complaint Redressal Committee (CRC)” means committee appointed by Director to
deal with cases of unfair means/malpractice/s in examination.
7. “Board of Studies (BoS)" means departmental academic body common for UG and PG
programmes.
8. “Semester" means period in which academic activities are carried out.
9. “Summer Term" means a period during summer vacation for approximately 3-4 weeks
duration, during which remedial classes, industrial training, and soft skill training are
conducted.
10. “Course" means theory/laboratory/seminar/project/mini project.
11. “Course credit" means weightage assigned to a course.
12. “Grade" means double letter assigned to indicate the performance of student in a
course.
13. “Course teacher" means faculty member assigned to teach a course.
14. “Semester Performance Index (SPI)" means the weighted average of grade point of a
student in a semester.
15. “Cumulative Performance Index (CPI)" means the weighted average of grade points
for all the semesters completed by a student.
16. “Allowed to Keep Term (ATKT)" means allowed for admission after satisfying
minimum credits criterion.
17. “Board of Examination (BoE)" means apex examination body implementing rules and
regulations framed by AC.
18. “Grade Moderation Committee “(GMC)" means committee appointed by Controller of
Examinations to moderate and finalize the grades assigned by course teachers.
19. “Academic Standing Committee (ASC)” means apex body next to AC to take
decisions under emergent situations subjected to ratification by AC.
20. “Academic RRs” means rules and regulations governing academic system of the
college.
21. “Departmental Advisory Board”(DAB) means departmental advisory body common
for UG and PG programmes.
22. “Departmental Academic and Programme Evaluation Committee (DAPEC)” means
departmental academic and advisory body next to BoS and DAB.

85
2. INTRODUCTION
2.1. All six undergraduate Engineering programmes (Civil, Mechanical, Electrical,

Electronics, Computer science and Engg., and Information Technology) shall be
governed by the rules and regulations provided in this version of academic RRs. The
curriculum of each programme provides i) broad based knowledge; ii) quality content
of courses; iii) academic flexibility; iv) scope for multi-disciplinary learning activities;
v) opportunity for industry oriented projects. The curriculum designed shall be in line
with the out-come based education. Apart from programme requirements, students
shall compulsorily undergo foundation courses on sciences, humanities, and
engineering; courses on management and economics. The stringent evaluation norms
shall be followed to maintain quality of engineering education. The examination
system shall be transparent and governed by rules, regulations and time-bound
activities.
2.2. The medium of instruction throughout the programme shall be in English.
2.3. The semester system shall be adopted for academic activities in the college. Normally,
all odd semesters shall start in third week of July except for first semester of B.Tech.
and shall end in first week of November. All even semesters shall start in January and
shall end in last week of April. The start of first semester for B. Tech. and M. Tech.
shall be governed by admission schedule declared by Government of Maharashtra.
Academic calendar shall be prepared and displayed before the start of every academic
year.
2.4. The rules and regulations mentioned in this document shall be common to all
undergraduate programmes (B.Tech.) oﬀered by the college.
2.5. The provisions made in this document shall govern the policies and procedures,
curriculum, course delivery, evaluation system and conduct of the examinations.
2.6. The rules and regulations here under shall be subjected to amendment made by the
Academic Council (AC) from time to time, based on the recommendations of the BoS.
All such amendments shall be applicable to all further batches including those already
undergoing the programme.
2.7. The rules and regulations formulated in this document shall be subjected to
revisions/refinement/updates/modifications through approval by the AC, from time to
time, and shall be binding on all concerned stake holders, including the students,
faculty, staff, departments, and institute authorities.

86
3. ORGANIZATION STRUCTURE AND ACADEMIC DEPARTMENTS
3.1. The academic administration of the college consists of committees and functionaries.
The committees shall be AC, ASC, BoE, BoS, DAB and DAPEC, and functionaries
shall be Director, Deputy Director, Dean Academics, Controller of examinations, Heads
of Department, Programme academic coordinator, Programme evaluation coordinator,
and First year programme coordinator.
3.2. The academic programmes of the college shall be governed by Rules and Regulations
approved by the AC from time to time. The AC is a statutory and supreme body that
governs all academic matters of the college, and the decisions of Chairman (AC)
(Director of the college) shall be final in regard to all academic issues. All academic
activities shall be scheduled through an approved academic calendar notified in the
beginning of each academic year. ASC shall continuously assess the academic activities
and makes appropriate revisions/modifications/improvements as and when required
under emergent situations.
3.3. Academic departments and programmes offered
The college offers undergraduate programmes in engineering. The academic

departments and the respective programme offered are given in Table 3.1.
Table 3.1: Academic Departments and Offered Programmes

S. Academic Programme Offered Programme Department/Branch
No. Department Code Code
1 Civil Bachelor of Technology BTE CV

Engineering in Civil Engineering
[B.Tech. (Civil)]
2 Mechanical Bachelor of Technology BTE ME

Engineering in Mechanical
Engineering
[B.Tech. (Mechanical)]
3 Electrical Bachelor of Technology BTE EL

Engineering in Electrical Engineering
[B.Tech. (Electrical)]
4 Electronics Bachelor of Technology BTE EN

Engineering in Electronics
Engineering
[B.Tech. (Electronics)]
5 Computer Bachelor of Technology BTE CS
in Computer Science and
Science and
Engineering Engineering
(B.Tech. (Computer
Science and
Engineering)
6 Information Bachelor of Technology BTE IT
Technology in Information

87
Technology
[B.Tech. (Information
Technology)]
7 Humanities - - HS
8 Mathematics - - MA
9 Chemistry - - CH
10 Physics - - PH
11 Applied - - AM
Mechanics
The normal duration of these academic programmes is eight semesters. An extension to

this period may be given subjected to approval by AC.
4. ADMISSION
4.1. Regular and Lateral Entry
Regular entry refers to admission of students for first, second (excluding lateral entry),
third, and final year of the programme in odd semesters.
Lateral entry refers to admission of students for second year directly through Diploma
qualification.
4.2. The admission process and eligibility to various undergraduate programmes for regular
entry (first year) and lateral entry (second year) are governed by the norms and
procedures of Government of Maharashtra.
The candidate shall be provisionally admitted subject to fulfilment of eligibility criteria

prescribed by government/University from time to time.
4.3. Each student shall be allotted Programme Registration Number (PRN) at the time of
first admission/registration and that will be a permanent identification number. The
number shall be
YYYY PPP BB SS NNN
Year Programme Department/Branch Specialization/ Roll Number

Streams
SS is applicable to M. Tech. programme only, for B. Tech. programmes SS shall be 00.
This number shall never change and the allotted number shall not be offered to any other
student even after cancellation of admission. The number shall be valid till the student
completes the programme or cancels the admission or is removed from the roll.

88
4.4. The students seeking admission (regular entry) to second, third and final year should
have earned all the credits of the pre-previous year and at least 75% credits of the
previous year. For example, for admission to 5th semester (i.e. 3rd year of programme), a
student should have earned all credits of the first year and 75% credits of the second
year. Similarly for admission to the 7th semester (i.e. 4th year of programme), a student
should have earned all the credits of the second year and 75% credits of the third year.
However, if calculation of 75% credits results in to a mixed number (integer + proper
fraction) then the integer part of that number shall be considered for taking decision
related with this clause.
4.5. Entry from University Pattern to Autonomous Pattern
Students admitted to WCE in pre-autonomous status and desirous of seeking re-

admission shall be eligible for admission in autonomous status only in odd (3rd, 5th, and
7th) semesters. Such students should have passed all the courses of previous semesters or
fulfil the prevailing ATKT norms of Shivaji University, Kolhapur. The students admitted
through ATKT norms shall clear backlog courses by appearing for the respective
examinations of Shivaji University, Kolhapur. Further they shall undergo additional
academic requirements (bridge courses) if any as specified by the BoS of the respective
department to be at par with WCE autonomous curriculum. Students who have obtained
condone in any of the subjects/courses of university curriculum by Shivaji University,
Kolhapur shall be considered to have cleared that subject/course.
4.6. Change of programme/branch
Students shall be eligible to apply for change of branch after completing the first two
semesters. The following rules/guidelines shall be used for considering their application
for change:
i. The process of change of branch shall be carried out purely on merit basis
subject to the rules of admissions prevailing at the time of such change.
ii. Students with fail grade (FF) in any course and/or having backlogs shall not be
eligible to apply.
iii. The request for change of branch by a student from branch A to branch B shall
be considered if number of students of branch B does not exceed the
sanctioned capacity of branch B.
iv. All such transfers shall be eﬀected only once at the beginning of third
semester. No application for change of branch during subsequent semesters
shall be entertained.
v. Students allotted with a branch of their choice should accept it and no further
request for change shall be entertained.
vi. There shall be no change in PRN number for students availing facility of
branch change.
4.7. Temporary Withdrawal
A student shall be permitted to withdraw temporarily from the college for the reasons
beyond his/her control. The applicable rules are:

89
i. The withdrawal shall be considered for a complete semester or in multiples of

semester.
ii. The student shall apply to Dean Academics for such a withdrawal stating the
reasons for such a withdrawal, along with supporting documents, consent of
his/her parent/guardian and clearance/no due certificate from all the concerned
departments.
iii. Dean Academics shall peruse the case and recommend for the approval from
AC/ASC.
iv. A student availing of temporary withdrawal from the College under the above
provision shall be required to pay such fees and/or charges as may be fixed by
the college until such time as his/her name appears on the student’s roll list.
However, it may be noted that the fees/charges once paid shall not be
refunded.
v. Normally, a student will be entitled to avail the temporary withdrawal facility

only once during the programme. However, request for any further withdrawal
for the concerned student shall have to be approved by the AC of the college.
4.8. Termination from the Programme
A student shall be terminated from the programme in the following cases:
i. Involved in ragging and not obeying discipline stipulated by college;
ii. Successive failures in first Year: Normally a student who fails to obtain
eligibility for admission to third semester within three successive academic
years shall be declared as Not Fit for Technical Education [NFTE]. Such
students shall be permitted for only one year to continue the education in the
college provided the permission is accorded by AC. Director shall be
authorized to terminate such student.
iii. Not completing programme in prescribed period: Students shall have to

complete B. Tech. programme in maximum period of 6 years (12 semesters)
for regular entry and 5 years (10 semesters) for lateral entry from the date of
first admission. However, genuine cases with proper justification may be
referred to AC for extending programme completion period. Such student will
be declared as Failed to Complete Technical Education [FCTE].

90
5. ACADEMIC CALENDAR
5.1. The academic activities of the college shall be governed by academic calendar prepared
by Dean Academics and approved by the AC/ASC. It shall be notified at the beginning
of each academic year. Academic calendar shall incorporate schedule of admission,
course registration, course delivery, examination/evaluation, course feedback,
course/graduate exit survey, co-curricular activities, extra-curricular activities, holidays,
compensation for academic loss, meetings (AC, ASC, IQAC, BoE, Alumni), academic
audit, and vacation.
5.2. The curriculum shall be typically delivered in two semesters in an academic year. Each
semester shall be of 20 weeks (100 days) duration, including evaluation, grade
moderation and result declaration. Generally, 13-14 weeks (72-77 days) for course
content delivery and 4-6 weeks (20–30 days) for examination/evaluation shall be
assigned in each semester. The academic session in each semester shall provide at least
75 teaching days, with 40 hours of teaching per week. The first and second semesters of
an academic year normally shall begin from mid-July and first week of January
respectively.
5.3. The academic calendar should be strictly adhered to, and all other activities including co-
curricular and extra-curricular activities should be scheduled so as not to interfere with
the curricular activities as stipulated in the academic calendar.
5.4. The non-conduct of academics on any particular teaching day for what so ever reason
shall be made up by having the class/lab/teaching sessions conducted on a suitable
Saturday by following the particular class time table of that teaching day which was so
lost.
6. ATTENDANCE
6.1 All students should attend the classes and expected to be regular (100% attendance) for
all the courses. The attendance records of students should be maintained in WCE moodle
by the course teacher. The students should check their attendance in WCE moodle
regularly and should contact respective course teacher for any discrepancy/grievance.
6.2 A maximum of 25% exemption in the attendance may be permitted for the approved
leave of absence from class teacher/HoD for participating in co-curricular/extra-
curricular activities/medical emergencies/reasons beyond the control of student. Students
with more than 75% attendance shall not be imposed with any grade penalty.
6.3 The students with less than 75% attendance in theory course/s shall be liable for grade
penalty as below:
i. Students having attendance greater than or equal to 65% but less than 75%
shall be allowed to appear for ESE in that course with maximum grade of BC.
ii. Students having attendance greater than or equal to 50% but less than 65%
shall be allowed to appear for ESE in that course with maximum grade of CC.
iii. Students having attendance less than 50% shall be awarded with XX1 grade in
that course.

91
6.4 Students reported having “non-satisfactory performance” in a laboratory/seminar/mini

project/project by the course teacher shall obtain XX1 grade. Non-satisfactory
performance shall be reported in case of poor attendance or not satisfying/fulfilling the
requirements for these courses.
6.5 Students obtaining XX1 grade in a course/s shall not be eligible to appear for ESE in that
semester and also makeup examination in that academic year for these course/s. The
performance of such students in ISE and MSE for this course/s shall be cancelled.
6.6 Students obtaining XX1 grade shall re-register for the course/s in subsequent year.
6.7 Students obtaining “XX1” grade in more than three courses in a regular semester shall be
detained for that semester and shall not be allowed to appear for ESE in that semester
and also make up examination in that academic year for any of the courses. The
performance of the student in ISE and MSE for all courses shall be cancelled. Such
students shall have to re-register for all courses of that semester in next academic year
and undergo all evaluations along with regular students.
7. CURRICULUM
7.1. There shall be a prescribed course structure for each of the academic programmes and in
general terms it shall be known as the curriculum of courses of study. The curriculum
prescribes all the courses of study semester-wise with credits, assigned teaching/contact
hours, evaluation scheme and minimum requirements for the award of degree. The
curriculum revisions/reforms/revamping shall be a continuous process governed by
outcome based education, choice based credit system and AICTE guidelines.
7.2. The components of curriculum with the weightages assigned are given in Table 7.1. The
weightage given for these components are in line with those suggested by AICTE.
Table 7.1: Components of Curriculum

Weightage assigned
S. No. Component of curriculum (% in terms credit)
Humanities, Social science and

1 6
Management
2 Basic sciences including mathematics 15
3 Engineering science 15
4 Professional core 34
5 Professional elective 15
6 Open elective 5
Project work, Seminar, Internship in
7 10
industry etc.

92
7.3. The curriculum shall have credit and audit courses. The structure of curriculum for a
programme and course syllabi shall be approved by AC on recommendation of
respective BoS.
7.4. Normally number of courses in a semester shall not be more than six for theory and four
for laboratory courses.
7.5. Open electives offered by any parent department shall be the courses listed in the
curriculum structure under the open elective category. These shall be offered to students
of any other department (excluding parent department) in 5th and 6th semester and any
other department (including the parent department) in 7th semester. Normally,
professional and open electives shall be conducted if minimum of fifteen students opt for
that elective course.
7.6. Major project work shall be in 8th semester. Project work in the final year facilitates
students in exhibiting their technical knowledge and professional skills to address a
solution to societal/industrial problems. It also encourages students to work in teams and
adopt project management skills. The preparatory work for the project shall be carried
out in 7th semester under pre-project work. The students shall have an option to carry out
the project either within campus or in industry/autonomous institutes/reputed
organizations. Normally, major project work shall be carried out by not more than five
students in a group. The formation of project groups shall be based on policy of
respective departments. The students shall be encouraged to opt for Sponsored Project At
Industry/Institute (SPAI). The projects under SPAI/any project outside the campus
require approval from concerned department.
7.7. Process and guidelines for SPAI shall be:
i. Students may opt for SPAI to be carried out in 8th semester.
ii. Students opting for SPAI should decide, identify and interact with relevant
industry/institute in 7th semester itself. However, as per the specific needs of a
particular department, the departmental academic and programme evaluation
committee shall decide appropriately. Students shall take necessary help from
their parent department/Training and Placement Officer (TPO) to establish
contact with industries/institutes.
iii. Students shall submit the application attached with relevant details viz.
correspondence with industry, area and nature of project to the department
before the end of 7th semester.
iv. Director/Dean Academics shall issue permission letter to the students on the
recommendation of HoD. Students shall be allowed to work in the
industry/institute for maximum of 13 weeks during the project work in 8th
semester.
v. An internal guide from the parent department and mentor from

industry/organization/institute where project is to be undertaken shall be
allocated to student. Both guides should discuss and finalize the scope of
project work and monitor the progress together.
vi. Internal guide should visit the industry at least twice in a semester to see the
progress of his/her student. Faculty will be supported with travelling and
dearness allowance to visit industry/institute.
93
vii. Students should maintain a diary, regularly write progress and get the approval
from both internal and external guides at least twice in a month either by
physically reporting or through email communication.
viii. Progress report and certification of the project work undertaken shall be
submitted by the student to the respective guide. The mode of evaluation shall
be same as adopted for students carrying out projects in-house.
7.8. A course code shall be NBBLMJ [e.g. 3CV313; 2OE301; 3IC401]
where, N: revision number, BB: Code of branch for core courses and departmental
professional electives/Code OE for open elective/Code IC for institute mandatory
course, L: Year/Level of course, and MJ: Course number [01 to 10 (semester I) and
21 to 30 (semester II) for theory core courses; 11 to 20 (semester I) and 31 to 40
(semester II) for theory professional electives; 41 to 50 (semester I and II) for seminar
and mini-projects; 51 to 70 (semester I) and 71 to 90 (semester II) for laboratory
courses; 91 to 99 (semester I and II) for project; 01-07 (semester I), 08-14 (semester
II) for open electives offered by AM; 15-21 (semester I), 22-28 (semester II) for open
electives offered by CV; 29-35 (semester I), 36-42 (semester II) for open electives
offered by ME; 43-49 (semester I), 50-56 (semester II) for open electives offered by
EL; 57-63 (semester I), 64-70 (semester II) for open electives offered by EN; 71-77
(semester I), 78-84 (semester II) for open electives offered by CS; 85-91 (semester I),
92-98 (semester II) for open electives offered by IT]
7.9. A typical description of course syllabus shall consist of course title, course code,
teaching hours per week for lecture/tutorial/practical, credit, pre-requisites, text
books, reference books, objectives, outcomes with relevant Bloom’s taxonomy levels,
mapping of course outcome with programme outcome, assessment scheme, content,
and module-wise outcomes (for theory course).
7.10. The details of curriculum structure and course details shall be published in college
intranet (ftp//:10.10.16.16) and website (www.walchandsangli.ac.in).
7.11. Summer term shall also be conducted for academically weak students during the
academic year for theory courses. Remedial classes and student-teacher interactive
sessions shall be conducted during summer term. The duration of summer term shall
be typically 3-4 weeks. The registration for the courses in summer term shall be
mainly to students who have obtained FF grade in a course in the current academic
year. Students with XX1 grade shall also be allowed for registration to summer term.
However, students with XX1 grade shall not be allowed to appear for makeup
examination in that semester as mentioned in section 6.5. Attendance penalty given in
section 6.3 shall be applicable for makeup examination also.
Students with FF/XX1 grade may register for course/s in a summer term by paying
prescribed fee for each course. A particular course/s shall be conducted if the number
of registered students for a course/s is more than 10. The registered students should
attend the classes regularly. Attendance rules shall be applicable to summer term also.
7.12. Credit System:
The primary purpose of the credit system is continuous evaluation of a student’s

performance which is measured by the number of credits the student has earned.
Typically, credit measures the quantum of work involved in a course. The cumulative
94
performance index (CPI) is calculated based on the course credits and grades obtained
by the student. A minimum number of earned credits and a minimum CPI should be
acquired in order to qualify for the degree.
7.13. A typical credit structure for various courses with various combinations of theory/
tutorial and laboratory/project/ seminar/ mini-project hours is given in Table 7.2.
Table 7.2: Assigned credits for various types of courses

Hours per week per student for Credits assigned
Theory Tutorial/ Laboratory/
Seminar Project
0 0 2 1
0 1 0 1
1 0 0 1
0 0 4 2
1 1 0 2
1 0 2 2
3 0 0 3
2 0 2 3
2 1 0 3
3 1 0 4
3 0 2 4
4 0 0 4
2 0 4 4
Credit = Theory hours + Tutorial hours + 0.5 (Laboratory hours)
A student can earn credits for a particular course by fulfilling the minimum academic
requirements of attendance and evaluation. No credits shall be awarded if a student
satisfies the minimum attendance requirements but fails to meet minimum evaluation
requirements.
7.14 The total number of credits required for completing a programme typically is in the
range of 175-180 for regular entry and 148-155 for lateral entry. The exact number of
credits required is mentioned in the curriculum structure for the respective
programme. The total number of credits in a semester in which a student shall register
is generally 23-25. Normally, the maximum number of credits per semester shall not
exceed 30.

95
8. REGISTRATION
8.1. The students admitted through regular and lateral entry shall be automatically registered
for the courses of that year. Such students shall not have to register separately for the
courses.
8.2. A regular admitted student and willing to apply for CPI improvement/having
FF/XX1/XX2 grade in a course/s shall re-register for the courses in which the student is
seeking grade improvement/passing grade. Such students have to complete the course re-
registration procedure alongwith regular students.
8.3. A student, not admitted as regular student, shall have to re-register for the courses in
which he/she has obtained FF/XX1/XX2 grade. Such students have to complete the
course re-registration procedure as per the schedule in academic calendar. A student
obtaining “XX1” grade in less than four courses in a regular semester shall be allowed to
re-register for such course/s in next academic year.
8.4. Course re-registration procedure shall include filling up course registration form
prescribed by Dean Academics office, verification by examination cell, recommendation
by programme academic coordinator and HoD of respective department, payment of
prescribed fee and final approval by Dean academics. Student/s re-registered for course/s
shall interact with concerned course teacher for any academic help. Student/s shall
complete all the academic and evaluation requirements in consultation with course
teacher.
8.5. Re-registration, according to rules, shall be carried out as per the schedule given in
academic calendar. Late registration may be permitted only for valid reasons and on
payment of late registration fees. In any case, registration should be completed before the
prescribed last date for registration.
8.6. In-absentia registration may be allowed only in rare cases at the discretion of the Dean
Academics and with prior permission.
8.7. Course re-registration shall be done for the course/s of both semesters at the start of
academic year as per the schedule in academic calendar.
9. COURSE EVALUATION
9.1 The evaluation of theory courses shall be on the basis of two In-Semester Evaluations
(ISE 1 and ISE 2), one Mid-Semester Exam (MSE), and one End Semester Examination
(ESE). The weightage for each of these evaluations is given in Table 9.1.
Table 9.1: Weightage of Evaluation

Weightage
Evaluation
Credit course Audit course
ISE-I 10% 35%
ISE-II 10% 35%
MSE 30% 30%
ESE 50% Nil

96
9.2 In-Semester Evaluation (ISE) for a theory course shall be carried out using assessment
tools such as assignment, oral, seminar, test (surprise/declared/quiz), and group
discussion. The course teacher shall use at least one assessment tool per ISE. The
assessment tool used for ISE 1 shall not be used for ISE 2. The assessment tool/s for
ISE shall be decided and announced by the course teacher at the beginning of the
course. The record of evaluation shall be maintained by course teacher and shall submit
it during academic audit.
9.3 The ISE 2 component for theory course shall not be shown to students and all other
components shall be shown to students.
9.4 MSE for every theory course (credit and audit) shall be conducted centrally as per the
schedule indicated in the academic calendar. MSE shall be of 30 marks and 1.5 hour
duration. MSE shall usually be based on modules 1, 2 and 3. There shall be no re-
examination for MSE.
9.5 ESE (written/online) for every theory credit course shall be conducted centrally. It shall
be of 50 marks and of duration 2 hours, or as mentioned in the examination scheme
approved by BoS of the respective programme. The examination shall be based on
entire syllabus of the respective course. The weightage shall be 20-30% for the syllabus
covered for MSE and 70-80% for the remaining syllabus after MSE. The question paper
of ESE may have options up to 20% for all theory credit courses. A student absent for
ESE of a course shall obtain “FF” grade. Such a student shall be allowed to appear for
make-up examination. There shall be no re-examination for ESE.
9.6 Evaluated answer books of MSE and ESE theory courses shall be shown to students. It
shall not be mandatory to show evaluated answer books to the students not present at
the given time slot by the course teacher.
9.7 If any examinee is not in a position to write on account of temporary physical disability
or injury due to accident and applies for a request for a writer with medical certificate
from the Civil Surgeon to that effect, then a writer shall be allowed/ assigned by CoE to
such examinee. Normally, such a writer shall neither be a student or a degree holder of
any technical programme having similar competency. The examinee shall, however,
apply in a prescribed proforma to CoE asking for permission to allow for such a writer.
CoE shall then verify the medical certificate and give a permission letter to the
examinee for using the writer. CoE shall then take the undertaking from the writer in a
prescribed proforma. Such examinee shall produce the permission letter from CoE for
using writer to the invigilator. Writer shall be allowed extra time as per section 9.8.
9.8 In case of student admitted with differently abled category/similar case/writer, who can
write but at much slower speed as compared to a normal student, he/she may be
allowed an extra time of 15 minutes for 30/50 marks paper and 30 minutes for 100
marks paper to write the examination for all the courses, provided he/she seeks
permission from CoE for extra writing time on account of his/her disability by
producing medical certificate from Civil Surgeon to this effect.
9.9 The paper setting, assessment and conduct of ISE 1, ISE 2 and MSE for audit course
shall be as per rules of credit course. Answers books of MSE for audit course shall be
shown to students.
9.9 The evaluation for laboratory courses shall be on the basis of either ISE or ISE and ESE
each having 50% weightage. ISE shall be continuous evaluation carried out throughout
97
the semester and based on performance of student in laboratory, experimental write-up,

presentation, oral, and test (surprise/declared/quiz). The course teacher shall use at least
two assessment tools as mentioned above for ISE. ESE shall be based on either oral or
performance and oral as per the examination scheme. ISE marks for laboratory course
shall be shown to students and ESE marks shall not be shown to students. External and
internal examiners shall conduct ESE.
9.10 The evaluation of courses, such as seminar, mini-projects where ISE is the only
component, shall be continuous in the form of presentation, test
(surprise/declared/quiz), assignment, oral and quality of report write-up. ISE marks
shall be displayed.
9.11 The evaluation for project shall be on the basis of ISE and ESE each having 50%
weightage. ISE shall be continuous evaluation carried out throughout the semester. A
project evaluation committee composed of two faculty members related to subject area
of project work and guide shall be constituted. The distribution of weightage for ISE
shall be 25% each by two faculty members and 50% by guide. Each student shall give
at least two progress seminars before the committee as per the schedule in academic
calendar. A report on project work shall be submitted by students at the time of second
progress seminar. ESE in the form of presentation followed by oral shall be conducted
by an external examiner and internal examiner/guide. The above mode of evaluations
and attendance for ISE and ESE as and when declared shall be mandatory for all
students inclusive of students carrying out their project work in industry (outside the
campus)/SPAI.
9.12 A common rubric shall be developed to assess seminar, mini-project and major project
courses for each programme by departmental academic and programme evaluation
committee. The rubric for the laboratory course shall be developed by the concerned
course coordinator. A course coordinator is the teacher who conducts the relevant
theory course or as decided by the departmental academic and programme evaluation
committee.
10. THE GRADING SYSTEM
10.1 Students shall be assigned a grade based on performance in all components of

evaluation/examination scheme of a course as per the structure. The grade indicates an
assessment of the student’s performance and shall be associated with equivalent number
called a ‘grade point’. The performance of the student as per the grade point on a 0-10
scale shall further fall into a letter grading system as shown in Table 10.1.

98
Table 10.1: Grade points

Letter Grade Grade point Description
AA 10 Outstanding
AB 9 Excellent
BB 8 Very good
BC 7 Good
CC 6 Average
CD 5 Below average
DD 4 Marginal
FF 0 Fail due to poor performance
XX1 0 Fail due to attendance shortage
XX2 0 Fail due to disciplinary action
PP (only for 0 Passed
non-credit
audit courses)
NP (only for 0 Not passed
non-credit
courses)
An ‘AA’ grade stands for outstanding achievement relative to the class. The ‘CC’
grade stands for average performance and it refers to ‘average’ as per course teacher’s
expectations in a holistic sense and is not based on the class average. The ‘DD’ grade
stands for marginal performance and is the minimum passing grade. The ‘FF’ grade
denotes poor performance. A student who obtains FF grade in any course shall either
appear for make-up examination or re-register for the course/s, till a passing grade is
obtained.
The ‘XX1’grade denotes failure of student due to shortage of minimum attendance

(less than 50% of the total hours engaged for that course) and not satisfactory
performance in laboratory course.
The ‘XX2’grade denotes failure of student due to disciplinary action.
A student who obtains ‘XX1/XX2’ grade in any course has to necessarily re-register
for the course in the subsequent semesters until a passing grade is obtained. Such
students shall not be allowed to appear for makeup examination.

99
10.2 Relative grading shall be applicable to courses where the number of students registered
is greater than or equal to 15.
10.3 The concerned faculty shall use ISE 1, ISE 2, MSE and ESE marks to decide the total
marks. The marks of each mode of evaluation shall be up-to one decimal place and
shall not be rounded. The total of ISE 1, ISE 2, MSE and ESE will be computed and
rounded to the nearest higher integer.
10.4 A student will be given maximum of two grace marks per course to obtain passing
grade in maximum of two courses provided he/she has passed in all other courses for
that semester. If a student has failed in more than two courses, no grace marks will be
applicable in any course.
10.5 The grace marks shall be applicable only to regular students and shall not be applicable
to any re-registered student in a course.
10.6 FF grade shall be assigned to a student in a theory course in the following cases;
i. Sum of marks obtained by the student in ISE 1, ISE 2, MSE, ESE, and
grace (if any) is less than 40.
ii. Marks obtained in ESE are less than 20.
10.7 FF grade shall be assigned in a laboratory course to a student who shall get less than
40% marks in ESE. XX1 grade shall be assigned in a laboratory course to a student
obtaining less than 40% marks in ISE.
10.8 In the further grading process, the failed students shall be excluded.
10.9 Then, the mean (µ) and standard deviation (σ) of total marks of passed students shall be
computed. From these, the relative grading thresholds shall be decided with the use of
Tables 10.2 and 10.3 for theory and lab./ proj./ mini-proj /seminar respectively.
Table 10.2: Relative grading thresholds for theory credit courses

100
Table 10.3: Thresholds for Lab./ Proj./ Mini-Proj /Seminar
10.10 After the relative grade thresholds are calculated, the faculty shall check the histogram
of the grades and adjust the thresholds to get nearly bell shaped histogram.
10.11 After this the faculty shall get the grade thresholds, approved from GMC. After
approval, the faculty shall lock the grade thresholds.
10.12 The faculty then shall review the boundary cases for each grade and may assign max
+1 grace (ISE) mark to those boundary cases. This shall not change the grade
boundaries.
10.13 The grades shall be calculated as per the Tables 10.2 and 10.3 and assigned to each
student.
10.14 The faculty shall prepare the grade sheet, verify it, sign on it, get the signature of the
GMC and handover the grade sheet to the HoD.
10.15 HoD shall receive grade sheets of all courses of the department from respective
faculty, verify them, and approve it and display the class wise provisional result on
the departmental notice board.
10.16 Absolute grading is applicable to courses where the number of students registered for
a course is less than 15. Allocation of grace marks shall be same as mentioned in 10.4.
The thresholds for absolute grading are given in Tables 10.4 and 10.5.
Table 10.4: Absolute grading thresholds for credit course
Grade Min Threshold Max Threshold

FF ≥0 < 40
DD ≥ 40 < 45
CD ≥ 45 < 50
CC ≥ 50 < 60
BC ≥ 60 < 70
BB ≥ 70 < 80
AB ≥ 80 < 90
AA ≥ 90 ≤100
Table 10.5: Absolute grading Thresholds for audit courses

101
Grade Min Threshold Max Threshold

NP ≥0 < 40
PP ≥ 40 ≤100
CPI shall be calculated as per absolute grading system for the students switched over
from university pattern to autonomous pattern.
10.17 Makeup Examination
i. There shall be a makeup examination for all courses (theory and laboratory)
once in a year. The makeup examination for an academic year shall be
conducted before the commencement of an odd semester of the next academic
year.
ii. The students failed in an odd semester and/or even semester in

theory/laboratory credit course in an academic year shall be allowed to appear
for a makeup examination for the same academic year. A student failed in an
audit course shall have to re-register for the course/equivalent course,
whenever it is offered in subsequent semester/s.
iii. Also the students, who have secured DD or CD grade in a course in an odd
semester or even semester in an academic year and applied for CPI
improvement, can appear for such makeup examination for the same academic
year. Students with XX1/XX2 grade in a course shall not be allowed to appear
for makeup examination of that course in that year.
iv. If a student applies for appearing for such makeup examination for a theory
course, the MSE, ISE 1 and ISE 2 marks of the course shall be null and void.
Also grade obtained in the course during regular odd or even semester
examination shall be null and void.
v. The makeup examination for a theory course shall be of 100 marks and shall
be based on all modules in the syllabus with equal weightage to each module.
The question paper shall not have any options (no internal options also).
vi. ISE component of student performance in regular semester for a laboratory

course shall be retained and makeup examination shall be conducted for ESE
component either with oral/performance and oral as per examination scheme
of that course.
vii. For makeup examination absolute grading shall be used and Table 10.4 shall
be applied for assigning the grades.
viii. The evaluated answer books of makeup examination shall be shown to

students.
ix. Grace marks shall not be awarded in makeup examination.
x. If the student fails to clear the course, even in make-up examination, he/she
shall have to re-register for the course whenever it is offered and undergo all
the modes of evaluations afresh.

102
xi. There shall not be any other re-examination for makeup examination for what
so ever reason.
10.18 Revaluation
A provision of addressing grievance by a student in evaluation of his/her answer

book for a course/s in ESE and makeup examination is made in terms of
revaluation. If student is not satisfied with the evaluation of his/her answer books in
ESE and makeup examination, he/she may apply for revaluation by paying
prescribed fee after the declaration of result. If the marks awarded in the paper
before and after revaluation vary by 10% or more of the maximum marks assigned
to that paper, then marks after revaluation shall be accepted for the revision of
result. However, irrespective of what is stated above, the marks obtained after
revaluation shall be accepted if the candidate gets the benefit of passing the
examination. In any case revaluation fee shall not be refunded.
10.19 The grade “PP” (Passed)/ “NP” (Not Passed) shall be awarded for audit courses
depending upon the performance of a student evaluated by the faculty in-charge.
No grade points shall be associated with these grades and performance in these
courses shall be not taken into account in the calculation of the performance indices
(SPI, CPI). However, the award of the degree shall be subject to obtaining a “PP”
grade in all such courses.
10.20 Transfer of credits
In order to provide opportunity to students for studying in different learning

environment, normally third year students can be sent to other reputed autonomous
institutes for one semester under credit transfer. Students can avail credit transfer
from other autonomous colleges for one semester provided the curriculum of both
the colleges have same minimum three core courses in that semester. The
remaining courses in that semester of that institute can be taken as professional
electives. Grades obtained by such credit students from that institute will be
suitably transferred to the grade card of WCE after approval from CoE, Dean
Academics and Director. Such credit transfer is mutually possible from both
institutes.
10.21 CPI improvement
i. A student in third and final year, and student who has passed final year B.
Tech. shall be permitted to apply for CPI improvement provided his/her CPI is
less than 6.50 (for students admitted before 2014-15)/6.75 (for students
admitted after 2014-15) by the end of second/third/final year. Such students
may apply for CPI improvement by registering for the course/s, of current
academic year or immediately preceding academic year, in which the student
has obtained DD/CD grade.
[e.g. 1. A student in final year may apply for the course/s of final and third
year. The student shall be permitted to appear for makeup examination in final
year /re-register for the course/s of third year for CPI improvement.
2. A student in third year may apply for the course/s of third and second year.
The student shall be permitted to appear for makeup examination in third year
/re-register for the course/s of second year for CPI improvement.]
ii. Re-registration should be done as per schedule in academic calendar.

103
iii. A student who has passed final B. Tech. shall apply for CPI improvement
within 15 days after declaration of makeup examination result. He/she shall re-
register for the course/s of final and third year in which the student wants to
apply for grade improvement. Such students shall return all the concerned
original grade cards to CoE.
iv. If the grade obtained by the student at the improvement examination is
improved, it shall be considered as the final grade. For such students new
grade card shall be issued with a remark “grade after improvement” for that
course/s in which grade is improved.
v. No student shall be permitted to improve grades in courses like
laboratory/seminar/mini-project/project.
vi. A student shall be permitted to apply for CPI improvement by re-registering
for maximum of five courses in an academic year.
11. CALCULATION OF PERFORMANCE INDICES
11.1 The overall performance of a student shall be indicated by indices: FYPI First Year
Performance Index (FYPI), Semester Performance Index (SPI) and Cumulative
Performance Index (CPI).
11.2 The performance of a student in a semester shall be indicated by a number called SPI.
11.3 SPI shall be the weighted average of the grade points obtained in all the courses
registered by the student during a semester.
11.4 Calculation of SPI.

n
∑C G i
i i
SPI = n
∑C i
i
where, Ci = number of credits earned in ith course of semester,

i = 1…n represent number of courses in which the student has registered in
that semester,
Gi = grade point earned in ith course.
11.5 SPI and CPI are calculated only after make-up examination.
11.6 First Year Performance Index (FYPI):
nf
∑C G
i
i i
FYPI = nf
∑C i
i
where, Ci = number of credits earned in ith course of first year,

i = 1…nf represent number of courses in which the student has registered in
first year,

104
Gi = grade point earned in ith course.
11.7 FYPI shall reflect all the courses undergone by a student in the first year including the
courses in which he/she has failed. FYPI may get modified in the subsequent semesters
whenever a student clears his/her first year backlog courses.
11.8 FYPI shall be calculated after the make-up examination on the basis of the grade
obtained by that student in a make-up examination. FYPI shall be calculated for the
students admitted prior to 2014-15. FYPI shall not be calculated for the students
admitted for academic year 2014-15 and onwards.
11.9 Cumulative Performance Index (CPI):
CPI is the weighted average of the grade points obtained in all the courses registered
by a student from the beginning of the third semester (for the students admitted prior to
2014-15) and first semester (for the students admitted for academic year 2014-15 and
onwards) of the programme.
m
∑C G
j
j j
CPI = m
∑C j
j
where, j = 1,…m represent the number of courses registered by the student

upto the semester upto which CPI is to be calculated.
11.10 FYPI, SPI and CPI will be rounded up to second decimal.
11.11 Conversion of CPI into equivalent percentage
The final CPI is converted into equivalent percentage for students admitted prior to
2014-15 and from 2014-15 is given in Table 11.1.
Table 11.1: CPI conversion to Percentage

CPI of students admitted Equivalent
Prior to 2014-15 2014-15 onwards Percentage
6.00 6.25 55
6.50 6.75 60
7.00 7.25 65
7.50 7.75 70
8.00 8.25 75
8.50 8.75 80
9.00 9.25 85
9.50 9.75 90
11.12 Students admitted prior to 2014-15 and passed with CPI above 6.50 will be awarded
first class else pass class. Student admitted after 2014-15 and passed with CPI above
6.75 will be awarded first class else pass class.

105
12. GRADE REPORT
12.1 A grade report in the form of grade card shall be issued to students at the end of
academic year after the declaration of makeup examination results.
12.2 The grade card shall include the following;
i. The list of courses registered for an academic year along with credits.
ii. The letter grade obtained in each course.
iii. The total number of credits earned by a student.
iv. SPI, FYPI (if applicable) and CPI.
v. Examination details.
12.3 Grading System, calculation of performance indices and conversion of CPI to

equivalent percentage shall be provided on the back page of grade card.
12.4 Result and class obtained shall be indicated only in the grade card of final year.
13. AWARD OF DEGREE
13.1 A student shall be eligible for the award of B. Tech. Degree from the College and the
University provided the student has:
i. Registered and passed all the prescribed courses and earned minimum credit
requirement for the degree.
ii. Obtained CPI ≥ 5.0.
iii. Paid all the institute dues and satisfied all the requirements prescribed.
iv. No case of indiscipline pending against him/her.
v. Obtained eligibility certificate from University.
13.2 AC shall recommend the list of students to Shivaji University for award of B. Tech.
degree.
14. AWARD OF MEDALS
14.1 Awards shall be given to the students for excellent performance in academics,
sports/extra-curricular/co-curricular activities, and overall performance.
14.2 Gold, silver and bronze medals shall be awarded to students with excellent academic
performance based on CPI in each programme.
14.3 Student shall be awarded with academically best performing student amongst all the
progrommes based on CPI.
14.4 An overall best student award shall be given for a student considering all-round
performance in academics, extra- and co-curricular activities.

106
14.5 The award of scholarships/free-ships and other benefits shall be in accordance with
rules of Government of Maharashtra and Government of India.
15 COMMITTEES AND FUNCTIONARIES
15.1 The tenure of all committees shall be two years. The frequency of meeting shall depend
on nature of the committee. One-third members of the committee shall constitute the
quorum. The tenure of functionaries (coordinators) mentioned in this document shall be
three years.
15.2 Academic council:
The Academic Council will be solely responsible for all academic matters, such as,
framing of academic policy, approval of courses, regulations and syllabi, etc. The
Council will involve faculty at all levels and also experts from outside, including
representatives of the university and the government. The decisions taken by the
Academic Council will not be subject to any further ratification by the Academic
Council or other statutory bodies of the university. The composition and functions of the
academic council are given below:
Composition:
i. Director of the college (Chairman).
ii. All Heads of department in the college.
iii. Four teachers of the college representing different categories of teaching staff
by rotation on the basis of seniority of service in the college.
iv. Not less than four experts from outside the college representing such areas as
industry, education, engineering etc., to be nominated by the Board of
Governors (BoG)/Administrative council.
v. Three nominees of the university.
vi. Dean academics (member secretary).
Functions and Powers:
a. Scrutinise and approve the proposals with or without modification of the Boards of
Studies with regard to courses of study, academic regulations, curricula, syllabi and
modifications thereof, instructional and evaluation arrangements, methods, procedures
relevant thereto etc., provided that where the Academic Council differs on any
proposal, it will have the right to return the matter for reconsideration to the Board of
Studies concerned or reject it, after giving reasons to do so.
b. Make regulations regarding the admission of students to different programmes of

study in the college subjected to Government rules and regulations.
c. Advice measures for improving the quality of teaching, study and research, innovative
evaluation and teaching-learning methods.
d. Make regulations for sports, extra-curricular activities, and proper maintenance and
functioning of the playgrounds and hostels.
e. Recommend to BoG proposals for institution of new programmes of study.

107
f. Recommend to BoG for institution of scholarships, studentships, fellowships, prizes

and medals, and to frame regulations for the award of the same.
g. Advice the BoG on suggestions(s) pertaining to academic affairs made by it.
h. Perform such other functions and such other duties as may be necessary and as may
be assigned by BoG pertaining to academics.
15.3 Academic Standing Committee (ASC)
Composition:
The composition is same as that of AC except external members.
ASC shall perform the functions under emergent situations subjected to ratification by
the AC.
15.4 Board of Studies
The Board of Studies (BoS) is the basic constituent of the academic system of an
autonomous college. Its functions will include framing the syllabi for various courses,
reviewing and updating syllabi from time to time, introducing new courses of study,
determining details of continuous assessment, recommending panels of examiners
under the semester system, etc. The composition and functions of the Board of
Studies are given below:
Composition:
i. Chairman: Head of the concerned department
ii. Internal members: The entire faculty of each specialisation.
iii. Academic council nominee: Two experts in the subject from outside the
college nominated by the Academic Council.
iv. University nominee: One expert nominated by the vice-chancellor from a
panel of six recommended by Director.
v. Industry representative: One representative from industry/corporate
sector/allied area relating to placement.
vi. One postgraduate meritorious alumnus to be nominated by Director.
vii. Co-opt members: Chairman, Board of Studies, may with the approval of the
Director shall co-opt: Experts from outside the college whenever special
courses of studies are to be formulated
viii. Member secretary: Programme Academic Coordinator
In addition to BoS for departments of various disciplines, there shall be a BoS for
Basic sciences, Mathematics and humanities.
Composition of general BoS:
i. Chairman: First year programme coordinator
ii. Internal members: The entire faculty of each specialisation.
iii. Academic council nominee: Two experts in the subject from outside the
college nominated by the Academic Council.
iv. University nominee: One expert nominated by the vice-chancellor from a
panel of six recommended by Director.
v. Industry representative: One representative from industry/corporate
vi. Co-opt members: Chairman, BoS, may with the approval of the Director shall
co-opt: Experts from outside the college whenever special courses of studies
are to be formulated.
vii. Member secretary: Nominated by first year Programme coordinator.
108
The term of the nominated members shall be two years. Director shall draw the
schedule for meeting of the Board of Studies for different departments. The meeting
may be scheduled as and when necessary, but at least once a year.
The Board of Studies of a department in the college shall:
a. Review and revision of curriculum keeping in view the VMOs of the college
and department, interest of the stakeholders, and national requirement for
consideration.
b. Ensure academic standard and excellence of the courses offered by the
department.
c. Recommend the curriculum for approval of the Academic Council.
d. Coordinate research, teaching, extension and other academic activities in the
department/college.
15.5 Departmental Advisory Board (DAB)
DAB is another basic constituent of the academic system of an autonomous college.

The composition and functions of the DAB are given below:
Composition:
i. Chairman: Head of the concerned department
ii. Internal members: Two senior faculty members of department.
iii. Industry representative: One representative from industry/corporate
iv. One academician outside college.
v. One meritorious alumnus.
vi. One parent.
vii. One student.
viii. Member secretary: Programme Evaluation Coordinator
The term of the nominated members shall be two years. Director shall draw the
schedule for meeting of the DAB for different departments. The meeting may be
scheduled as and when necessary, but at least once a year.
The DAB of a department in the college shall:
a. Formulate a process to review post-implementation effects of curriculum.
b. Suggest measures to ensure academic standard and excellence of the courses
offered by the department.
c. Suggest methodologies for innovative teaching and evaluation techniques;
enhancement of industry-institute interaction.
d. Identify and recommend the need of new programme.
e. Review target set for attainment of course outcomes and programme
outcomes.
f. Guide and provide support to department for enhancing interaction with
outside world.
g. Plan strategically to enhance the academic quality of department.
h. Address concerns of stakeholders expressed through feed back.
i. Defining and redefining the Programme Educational Objectives (PEOs) and
Programme Outcomes (POs) based on the recommendations by departmental
academic committee.
j. Study the achievement of PEOs and POs reported by department academic
committee and suggest measures for improvement.
15.6 Board of Examinations (BoE)

109
Composition:
i. Director (Chairman)
ii. Dean Academics
iii. Controller of Examination (COE): Member Secretary
iv. University Nominee (COE of Shivaji University (SU) or his nominee not
below the rank of Deputy Registrar)
v. One expert possessing ten years of industrial/field experience nominated by
the Chairman.
vi. DPC Chairpersons (Representing DPC)
vii. Coordinators (Examination, Assessment, Results and Tabulation)
a. The BoE shall

i. Ensure proper performance of the various duties in conducting
examinations viz. paper setting, time table preparation, assessment and
declaration of results.
ii. Recommend examination reforms and shall implement them after approval
of academic council.
iii. Prepare the detailed time table of examinations as per the schedule
approved by academic council.
iv. Arrange for strict vigilance during the conduct of examination so as to
avoid use of unfair means by the students, faculty, and invigilators.
b. Chairman, BoE shall constitute Complaint Redressal Committee (CRC) consisting of
three members as and when required to deal with the complaints related to the
conduct of examinations.
c. The recommendations of the CRC shall be approved by Chairman, BOE to take
appropriate disciplinary actions in the concerned matter. The disciplinary actions shall
be endorsed by the BOE.
d. The BOE shall perform such duties and responsibilities that are assigned by
Academic Council of the institute from time to time.
15.7 Departmental Academic and Programme Evaluation Committee

Composition:
i. Head of Dept. (Chairman)
ii. Five faculty members (at least one from each specialisation) nominated by
HoD.
iii. Member Secretary: Programme Academic Coordinator (UG)/Programme
Evaluation Coordinator (UG).

a. Review, revise and prepare curriculum structure following institutional policy,
suggest improvements in syllabus of a course/s prepared by course teacher/s,
and forward the curriculum to BoS for further recommendation.
b. Check appropriateness of course objectives, course outcomes, and mapping of
COs with POs and suggest necessary improvements/modifications.
c. Monitor the academic progress throughout the semester, conduct of classes,
and take appropriate corrective measures to improve quality of curriculum
delivery.
d. Review academic performance of students.
e. Counsel the concerned course teachers for improvement based on student
feedback, academic and question paper audit reports.
110
f. Set target/s for attainment of course outcomes and programme outcomes.

g. Formulate strategy to collect feedback from stake holders, analyze the
collected feedback and forward the analysis to DAB.
h. Contribute to maintain academic standard, improve quality of the courses
offered by the department and enhancement of industry-institute interaction.
i. Suggest open and professional electives considering societal needs.
j. Recommend methodologies for innovative teaching and evaluation techniques
to BoS.
k. Coordinate research, teaching, extension and other academic activities in the
department/college.
l. Carry out preparatory work for defining/redefining the Programme
Educational Objectives (PEOs) and Programme Outcomes (POs) periodically.
m. Monitor evaluation of course attainments leading to achievement of
programme outcomes and report the results of assessment to BoS.
15.8 Programme Academic Coordinator

There shall be Programme Academic Coordinator for UG programme. The functions
and duties are:
a. Coordination of all academic activities of the programme viz. curriculum
revision, framing of syllabus, time table, BoS meeting as member secretary, re-
registration of course/s, display and submission of attendance status.
b. Coordination for programme related examination activities (submission of ISE
marks and question papers), Preparation of schedule of ESE for laboratory in
coordination with examination cell.
c. Monitoring academic activities and conduct of classes.
d. Extend necessary help to departmental academic and programme evaluation
committee.
e. Recording and forwarding all academic and examination related documents to
Dean academics/CoE.
f. Work in association with Dean Academics and Controller of Examinations.
15.9 Programme Evaluation Coordinator

There shall be Programme Evaluation Coordinator for UG programme. The functions
and duties PEC are:
a. Coordination to conduct internal academic audit, question paper audit, and
departmental advisory board meetings as a member secretary.
b. Conduct course and graduate exit survey, make arrangements for feedback from
stakeholders (industry/employer/alumni) and feedback analysis.
c. Monitoring assessment of course outcomes.
d. Computation/assessment/evaluation/achievement of PEOs and POs as per NBA
requirements.
e. Compilation of information required for Annual Quality Assurance Report
(AQAR) of the Internal Quality Assurance Cell (IQAC) and forwarding it to Dean
QA.
f. Extend necessary help to departmental academic and programme evaluation
committee.
g. Work in association with Dean QA.
PACUG and PECUG will coordinate NBA documentation activity.
15.10 First Year Programme Coordinator (FYPC)

111
There shall be FYPC and functions and duties are:

a) Coordination of all academic and examination (submission of ISE marks and
question papers)activities of first year programme (excluding basic engineering
courses) viz. curriculum revision, framing of syllabus, time table, BoS meeting as
Chairman, re-registration of course/s, display and submission of attendance status.
b) Coordination to conduct internal academic and question paper audit.
c) Provide assessment of course outcomes to concerned departments and relevant
information required for NBA documentation.
d) Monitoring academic activities and conduct of first year classes.
e) Work in association with Dean Academics.
15.11 Faculty advisor /Mentor

The faculty Advisor/Mentor will be appointed by the HoD of the parent department,
who will be assigned a group (20 -25) of students of the concerned parent department,
and will be valid throughout their duration of study. A group shall consist of 5-7
students from each class.
The functions and duties of FA are:
a. Help the students in planning their courses and related activities during their study
period.
b. Monitor, guide, advice and counsel the students on all academic matters.
c. Interact with the students at least twice in a semester and maintain the
records/minutes of meeting.
15.12 Course teacher

The functions and duties of course teacher are:
a. Conduct classes as per the time table issued by the HoD and maintain all academic
records (Attendance on moodle, Evaluation, Attainment) for that course.
b. Prepare course delivery and evaluation plan for student performance and distribute
to all the students within the first week of each semester.
c. Display students’ performance in attendance and evaluation as stipulated in the
academic RRs.
d. Report to the HOD on a periodic (monthly) basis, the potential cases of very poor
academic performance as well as those of low attendance.
e. Submit ISE marks to PACUG as per the schedule in academic calendar.
f. Document all academic records in the course book in a format specified by Dean
QA and submit it for academic audit.
16. DISCIPLINE AND CONDUCT
16.1 Any act of misconduct committed by a student inside or outside the campus shall be an
act of violation of discipline of the college. Violations of the discipline shall include:
a. Disruption of teaching, examination, administrative work, curricular or extra-

curricular activity, and any act likely to cause such disruption.
b. Damaging or defacing the property inside or outside the college campus.
c. Engaging in any attempt at wrongful confinement of teachers, offices,
employees and students of the college.
d. Use of abusive and derogatory slogans or intimidatory language or incitement
of hatred and violence.
112
e. Ragging in any form ("Ragging" means causing, inducing, compelling or

forcing a student, whether by way of a practical joke or otherwise, to do any
act which detracts from human dignity or violates his person or exposes him to
ridicule or to forbear from doing any lawful act, by intimidating, wrongfully
restraining, wrongfully confining or injuring him or by using criminal force to
him or by holding out to him any threat of such intimidation, wrongful
restraint, wrongful confinement, injury or the use of criminal offence.
Supreme Court of India has defined ragging as a criminal offence.)
f. Eve teasing or disrespectful behaviour to women or girls students.
g. An assault upon, or intimidation of, or insulting behaviour towards a teacher,
officer, employee or student or any other person.
h. Getting enrolled in more than one programme course of study simultaneously.
i. Committing forgery, tampering with documents or records, identity cards,
furnishing false certificate or false information.
j. Organising instant agitation/meetings without prior permission in the campus.
k. Viewing/downloading obscene information/data, images and executable files,
sending obscene mails/messages via facebook / tweeter/other social sites using
college servers.
l. Sharing the login and passwords & other details of IT facilities provided to
other students/outsiders.
m. Refusing to provide an identity card when demanded by any college authority.
n. Consuming or possessing alcoholic drinks, dangerous drugs or other
intoxicants in the college campus.
o. Possessing or using any weapons and fire arms in the college campus.
p. Unauthorized occupation of hostel, Accommodating guests or other persons in
hostels without permission.
q. Malpractice in examination.
r. indulging in anti-national activities contrary to the provisions of acts and laws
enforced by Government.
s. Any other act which may be considered by the Director or the Discipline
Committee to be an act of violation of discipline.
16.2 Any act of indiscipline of a student reported to Director/Concerned authority shall be

referred to Grievance Redressal and Disciplinary Committee of the college. The
Committee shall enquire into the charges and recommend suitable punishment if the
charges are substantiated. The penalties/punishment/actions may include:
a. Written warning and information to the parents/guardian.

b. Imposition of fine ranging from Rs. 500/- upto Rs. 5000/-.
c. Suspension from the College/Hostel/Mess/Library/ or availing of any other
facility.
d. Suspension or cancellation of scholarships/fellowship or any financial
assistance from any source.
e. Recover of loss caused to college property.
f. Debarring from participation in sports/NSS/student club.
g. Disqualifying from holding any representative position in the
Class/College/Hostel/Mess/Sports/Clubs and in similar other bodies.
h. Disqualifying from appearing in placement and receiving any awards.
i. Expulsion from the Hostel/Mess/Library/Club/College for a specified period
by forfeiting fees.
j. Debarring from an examination.
k. Action as per Maharashtra anti-ragging act 1999.

113
16.3 If a student is found guilty of malpractice in examinations then he/she shall be

punished as per the recommendations of the Complaint Redressal Committee (CRC)
constituted by BoE. The CRC shall inquire and decide the punishment by following
the Guidelines for imposing punishment on examinee/s/others involved in unfair
means. However depending on the situation, committee may quantify the severity of
the punishment which may include:
a. Cancellation of the performance of the student in the course/s in which he/she was
involved in malpractice.
b. Cancellation of the performance in that examination for all the courses.
c. Expulsion/termination from the college if repeatedly involved.
d. Stoppage of scholarships/stipend.
e. Issuing warning.
f. Debarring from the examinations for a specified period.
16.4 Student/s involved in act of indiscipline/malpractice in examination shall be issued

notice asking him/her asked to be present before the respective committee
(GRDC/CRC) on the day at specified time and venue with his/her parents/guardian.
He/she shall give written reply/oral explanation to the charges levelled against him/her
for consideration. If the implicated student/s fails to appear before the committee, then
decision shall be taken in absentia, on the basis of available evidence/documents, which
shall be binding on the concerned student.
16.5 Every admitted student shall be issued photo identification (ID) card which must be
retained by the student while he/she is registered at WCE. The student must have valid
ID card with him/her while in the institute.
17. CONCLUSIONS
The academic policies/regulations regarding conduct of undergraduate programme in

WCE are published in this document. The academic council reserves the right to modify
these policies/regulations as and when required from the point of view of achieving
academic excellence.
The decision of Director (Chairman, Academic council) shall be final and binding on all
concerned i) for the cases not covered through this document; ii) in case of any dispute,
difference of opinion in interpretation of this regulation; and iii) emergent cases.
Director

114
Changes/Amendments in Academic Rules

and Regulations [UG]
(After 6th and 7th Academic Council
Meeting)

115
Inclusions/Incorporations in academic rules and regulations (V1.6) of UG and PG

(As per the decisions in 7th Academic Council meeting)
6.3
iv) The participation by a student at state/national level and bringing credit to institute is to be
considered for exemption/excuse from attendance during the period of the concerned activity.
The exemption/excuse is to be considered by assigning the same grade to exemption/excuse
as that of present (Normally one grade) in moodle setting for attendance record.
9.14 The achievement by a student at state/national level and bringing credit to institute is to
be considered for exemption from MSE. The performance in ESE by such student will be
enhanced by 1.6 factor to compensate for exemption of MSE. However, such student should
get minimum of 40% marks in ESE. In case ESE is missed, such student should appear for
make-up examination. No remarks will be indicated in grade card.
10.22 (UG) and 10.24 (PG)
The rules for giving extra 3% marks (E3M) for Specially Abled students (SAS)
a. The E3M for SAS shall be given only for the first attempt.
b. The E3M shall not be applicable to SAS appearing for makeup examinations.
However, if such a student, due to valid reasons, does not appear for any of the
evaluation in all the courses during the regular semester and if he is permitted
to appear in all the courses of the concerned semester during the makeup
examination of that year, in such a case E3M shall be a valid claim to the
concerned SAS.
c. The total of maximum marks of the semester, for which the SAS is appearing,
shall be computed based on the current academic structure in force and
excluding the backlog (re-registered) courses.
d. The courses, in which SAS has failed, shall be arranged in descending order
based on the scored marks (The course with least marks required for passing
will be first and so on).
e. Accordingly, the 3% marks shall be computed and distributed among the

courses of above two groups so as to give marks required for passing subject
to the condition that, the total extra marks shall not exceed 3% of the
concerned semester total.
f. While giving extra marks, first the required marks shall be given to enable the
student to pass ESE and then (if needed), the required marks for passing the
course shall be given. However he/she shall be pass with passing grade “DD”.
g. To be eligible for these benefits, SAS must have appeared all components of
evaluations for the course.
h. The course/s, for which SAS has availed this benefit, shall be indicated with (£
pound symbol) and mention of the GR will be made on the grade card.

116
Amendments in UG and PG RRs
CPI improvement
RR Present Amended
UG A student who has passed final B. Tech. A student who has passed final B. Tech.
10.21 iii. shall apply for CPI improvement within 15 may apply for CPI improvement. He/she
days after declaration of makeup shall re-register for the course/s of final
examination result. He/she shall re- and third year in which the student wants
register for the course/s of final and third to apply for grade improvement. Such
year in which the student wants to apply students shall return all the concerned
for grade improvement. Such students original grade cards to CoE.
shall return all the concerned original
grade cards to CoE.
PG A student who has passed M. Tech. shall A student who has passed M. Tech. may
10.23 iii. apply for CPI improvement within 15 days apply for CPI improvement. He/she shall
after declaration of makeup examination re-register for the course/s of first year in
result. He/she shall re-register for the which the student wants to apply for
course/s of first year in which the student grade improvement. Such students shall
wants to apply for grade improvement. return all the concerned original grade
Such students shall return all the cards to CoE.
concerned original grade cards to CoE.
Passing Criteria/Grace Marks

A student will be given maximum of two A student shall be given maximum of two
UG PG grace marks per course to obtain passing grace marks [(for ESE or (ISE1
10.4 grade in maximum of two courses +MSE+ISE2)] per course to obtain passing
provided he/she has passed in all other grade in maximum of two courses
courses for that semester. If a student provided he/she has passed in all other
has failed in more than two courses, no courses for that semester. If a student
grace marks will be applicable in any has failed in more than two courses, no
course. grace marks will be applicable in any
course.
UG PG FF grade shall be assigned to a student in FF grade shall be assigned to a student in

10.6 a theory course in the following cases; a theory course in the following cases;
i. Sum of marks obtained by the student i. Sum of marks obtained by the student
in ISE-1, ISE-2, MSE, ESE, and grace (if in ISE 1, ISE 2, MSE, ESE, and grace (if any)
any) is less than 40. is less than 40.
ii. Marks obtained in ESE are less than 20. ii. Marks obtained in ESE are less than 20
(with grace if any).

117

Information Technology

Uploaded by

Copyright:

Available Formats

Information Technology

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Information Technology

Uploaded by

Copyright:

Available Formats

Academic Documents for

FY B. Tech. (Information Technology)

Walchand College of Engineering, Sangli

S.No. Description Page No.

1 Vision Mission and Objectives of Institute 3

4 Curriculum Structure B. Tech. (Information Technology) (2018-2022) 6

5 Syllabus for FY B. Tech. (Information Technology) (w. e. f., 2018-19) 19

7 Changes/Amendments in Academic Rules and Regulations [UG] 114

8 Academic Calendar 119

Academic Documents for Information Technology

Vision Mission and Objectives of Institute

1. To produce capable graduate engineers with an aptitude for research and

1. To impart quality education through demanding academic programmes.

1. Achieve excellence in learning and research through continual improvement in

Academic Documents for Information Technology

Vision, Mission, and Programme

2. Providing opportunities to the students for the development of professional

3. Nurturing critical thinking and creativity in students

4. Inculcating students the life-long learning attitude and sensitivity towards

Program Educational Objectives of UG (Information Technology)

Programme Educational Objectives of Department of Information Technology are as

Demonstrate technical competency by applying knowledge to solve

Academic Documents for Information Technology

1. Engineering knowledge: Apply the knowledge of mathematics, science, engineering

Academic Documents for Information Technology

PROGRAM SPECIFIC OUTCOMES (B.Tech.)

PSO1: Apply Software Engineering practices, Programming logic,

Academic Documents for Information Technology

Walchand College of Engineering, Sangli

Academic Documents for Information Technology

Walchand College of Engineering, Sangli

ES 4ME102 Engineering Graphics 1 - 4 3 ISE 100 40

Elective on Basic Sciences

Academic Documents for Information Technology

Walchand College of Engineering, Sangli

Course Teaching Scheme Evaluation Scheme

Academic Documents for Information Technology

Walchand College of Engineering, Sangli

Course Teaching Scheme Evaluation Scheme

Academic Documents for Information Technology

Walchand College of Engineering, Sangli

Course Teaching Scheme Evaluation Scheme

Academic Documents for Information Technology

Walchand College of Engineering, Sangli

Course Teaching Scheme Evaluation Scheme

Academic Documents for Information Technology

List of Professional Elective 1

Academic Documents for Information Technology

Walchand College of Engineering, Sangli

Course Teaching Scheme Evaluation Scheme

Academic Documents for Information Technology

Professional electives on theory courses may also be opted by students of other

Elective Foundation Course in Humanities

List of Professional Elective 2

Academic Documents for Information Technology

Walchand College of Engineering, Sangli

Course Teaching Scheme Evaluation Scheme

Academic Documents for Information Technology

List of Professional Elective 3