Question Bank Manufacturing Process
Question Bank Manufacturing Process
Question Bank Manufacturing Process
Question Bank
Unit-I
Introduction to Overview of Manufacturing
Question Bank
Unit-II
Solidification Processes Metal Casting Fundamental
Question Bank
33. Classify the types of cores? Explain them with the help of sketches specifying their
common applications.
34. What is a core binder?
35. What is core print?
36. Describe different types of core sand.
37. Describe hand core making and machine core making.
38. What is “directional solidification”, and what is its influence on casting quality?
39. What are the general advantages, disadvantages applications of die casting?
40. Explain the various steps involved in the investment casting of metals.
41. What do you understand from centrifugal casting?
42. How are the centrifugal casting methods classified?
43. What are the advantages and disadvantages of true centrifugal casting?
26. What are the main factors which are responsible for producing defects in the
castings?
44. What are the common methods used for cleaning the surface of the casting?
Question Bank
Question Bank
47. Describe continuous casting process and discuss the important metallurgical features
of the billets produced by these methods.
48. Explain with the help of a neat sketch, the process of centrifugal casting.
49. With the help of a neat diagram describe the process of true centrifugal casting. How
can this method be used for production of pipes?
50. Illustrate and describe the process of semi-centrifugal casting.
51. Write short notes on the following:
(i) Slush casting (iv) Moore sand spun process
(ii) Pressed casting for centrifugal casting.
(iii) De Lavaud process for
centrifugal casting
52. What is centrifuging casting?. Describe the process, stating its differences with other
centrifugal casting methods.
53. What are the general rules and principles to be followed in designing a casting?
54. List the defects generally occurring from the following, stating the precautions
necessary to prevent them:
(i) Improper pouring (iii) Poor or defective cores,
technique, (iv) High moisture content in
(ii) Use of defective gating sand.
system
55. Write short notes on the following casting defects:
(i) Sand inclusions, (v) Metal penetration,
(ii) Cuts and washes, (vi) Drops,
(iii) Misrun and cold shuts, (vii) Warpage and
(iv) Honey combing, (viii) blow holes
56. Discuss briefly the causes and remedies of the following casting defects:
(i) Blow holes, (iv) Shrinkage cavities,
(ii) Porosity, (v) Scabs, and
(iii) Hot tears (vi) Gas porosity
57. Explain the causes and remedies of the following casting defects:
(i) Fins (vi) Rattails or buckles
(ii) Shot metal (vii) Fusion
(iii) Shifts (viii) Swells
(iv) Hard spots (ix) Crushes
(v) Run out
58. Name the various defects which occur in sand castings and state their probable
causes and remedies?
59. What are the various operations generally required to be performed after shake out
for cleaning the castings?
60. What do you understand from destructive and non-destructive testing methods of
inspecting castings?
61. What are the various non-destructive testing methods used for inspection of
castings? State their advantages and limitations:
62. Write short notes on the following inspection methods:
(i) Visual inspection (iv) Radiography
(ii) Pressure test (v) Magnetic particle testing
(iii) Penetrate testing (vi) Ultrasonic testing.
Manufacturing Processes-I
Question Bank
2. Explain with the help of neat sketches the construction and working of the following
types of crucible furnaces: (a) A coal fired pit furnace, (b) an oil fired tilting furnace,
and (c) A gas fired crucible furnace.
3. Discus briefly the various types of patterns used in foundry shop?
4. Define the following?
(i) Core prints (iv) Shrinkage allowance
(ii) Mould or cavity (v) Chaplets
(iii) Core boxes (vi) Chills
5. Describe the process of shell molding indicating:
(i) Composition of sand (iii) Advantages
mixture (iv) Limitations and
(ii) Steps in molding (v) Applications.
6. What is the function of the core in sand molding? How are cores held in place in
mold? And how are they supported?
7. Explain the difference with the help of sketches between true centrifugal casting,
semi centrifugal casting and centrifuge casting.
Manufacturing Processes-I
Question Bank
Unit -III
Metal Forming Processes
Question Bank
28. What is impact extrusion? Explain this process and state its specific applications.
29. Discuss the methods used for the production of pipes and tubes.
30. Using neat sketch describe briefly the method of extruding a hollow round
collapsible tube with help of drawing process.
Manufacturing Processes-I
Question Bank
UNIT-IV
Joining and Assembly Processes
Question Bank
25. Define electric arc welding. Discuss with the help of neat sketch, the principle of
arc welding.
What is straight polarity and reverse polarity?
26. Give a list of equipments required in general for electric arc welding.
27. Explain the principle of arc-welding.
28. What do you understand by the term polarity?
29. What is the advantage of having different polarities?
30. Compare the merits and demerits of using A.C and D.C for arc welding.
31. Describe briefly the methods of carbon arc and metallic arc welding.
32. Compare A.C. power source welding with D.C. power source welding.
33. Explain the principle of atomic hydrogen welding.
34. Write short notes on :
(a) Arc crater
(b) Arc blow
(c) Electrode
(d) Flux
35. What safety precautions are associated with electric arc welding?
36. Explain carbon arc welding with neat sketch.
37. Explain TIG welding and MIG welding with its merits, demerits and application.
38. Compare TIG welding with MIG welding.
39. Explain submerged arc welding with neat sketch.
40. Explain electro-slag welding with neat sketch. Compare it with electro-gas
welding.
41. Define flux shielded metal arc welding.
42. Explain operation, equipment, advantages, disadvantages and applications of flux
shielded
metal arc welding.
43. Explain plasma arc welding with neat sketch.
44. Compare plasma arc welding and TIG welding.
45. What do you under stand by thermit welding? What are its main advantages?
46. How does thermit welding process differ from ordinary arc welding?
47. Write short notes on:
(i) Forge or smithy welding.
(ii) Leftward welding.
(iii) Rightward welding.
(iv) Vertical welding
48. What are the electrodes used in arc welding made of? What is electrode coating
and why are
they provided?
49. How is an electrode specified? What factors govern the selection of an electrode?
50. Describe the following welding methods and their specific merits, demerits and
applications:
(i) TIG welding
(ii) MIG welding
51. Describe the process of submerged arc welding stating its advantages and
limitations.
52. With the help of a neat diagram explain the process of electro slag welding.
Manufacturing Processes-I
Question Bank
53. Discuss the method of resistance welding. What are its advantages and
disadvantages?
54. What is the main source of heat in resistance welding? Why is the control of
pressure
important in resistance welding?
55. Compare spot welding with seam welding.
56. Discuss, with the help of neat sketch, the principle of spot welding,
57. Describe in detail with set up process parameters, advantages, disadvantages and
applications
of the following:
(i) Spot welding
(ii) Seam welding
(iii) Projection welding
(iv) Upset butt welding
(v) Flash butt welding
(vi) Percussion welding
58. Write short notes on following:
(i) Soldering
(ii) Brazing
(iii) Braze welding
59. Differentiate between soldering, brazing and welding.
60. Write short notes on:
(i) Electro-gas welding.
(ii) Stud welding.
(iii) Plasma arc welding.
Manufacturing Processes-I
Question Bank
UNIT-V
Shaping Processes for Plastics
Q.1. Give the advantages and limitations of plastic products. Plastic is substitute
material of any ferrous
or non ferrous material? Explain
Q.2. Enlist the processing of plastics in details.
Q.3. Explain with a neat sketch plastic extrusion process, give their applications.
Q.4. Explain with neat ketch calendaring process of plastic
Q.5. Explain step by step procedure of thermoforming with neat sketch.
Q.6. Classify different plastic molding processes and give its advantaged and
limitations.
Q.7. Write a short note on
a. Compression Molding
b. Transfer Molding
c. Rotational Molding
d. Reaction Injection Molding
e. Blow Molding
f. Injection Molding
Q.8. Explain in details injection moulding process
Q.9. Explain in details plunger type injection moulding press.
Q.10. Write a short note on injection moulding screw.
Q.11. Classify different types of screw used in injection moulding and explain any one
with neat sketch.
Q.12. With a neat sketch calendaring process.
Manufacturing Processes-I
Question Bank
UNIT-VI
Sheet Metal Working
2. Write short notes on:
a) Punching
b) Piercing
c) Blanking
d) Slitting
e) Bending
f) Lancing
Question Bank
26. How magnetic pulse forming process is carried out on sheet metal? Explain peen
forming process with a neat sketch
27. What is super plastic of metal? How this process is carried out on sheet metals?
28. Classify the presses used for sheet metal working and explain any one of them.
29. Differentiate between manual press and mechanical press
30. Classify the press on the basis of number of slides and explain any two of them.
31. Classify the press on the basis of number of slides and explain any two of them.
32. Classify the press on the basis of frame and construction and explain any two of
them.
33. Explain in details “what important factors to be considered for selection of press”