Amlogic USB Burning Tool V2 Guide V0.5
Amlogic USB Burning Tool V2 Guide V0.5
Amlogic USB Burning Tool V2 Guide V0.5
Application Notes
Amlogic, Inc.
2518 Mission College Blvd
Santa Clara, CA 95054
U.S.A.
www.amlogic.com
Legal Notices
© 2017 Amlogic, Inc. All rights reserved. Amlogic ® is registered trademarks of Amlogic, Inc. All other
registered trademarks, trademarks and service marks are property of their respective owners.
This document is Amlogic Company confidential and is not intended for any external distribution.
Revision History
Table of Contents
1. Overview....................................................................................................................................................................... 4
2. Work Station Standard.................................................................................................................................................. 4
3. Tool UI and Operating Intro........................................................................................................................................... 5
3.1 Main.................................................................................................................................................................... 5
3.2 Connect Device.................................................................................................................................................. 5
3.3 Load the Image................................................................................................................................................... 6
3.4 Burn.................................................................................................................................................................... 6
3.5 Finish Burning..................................................................................................................................................... 7
3.6 Burning Configurations....................................................................................................................................... 9
3.7 Statistics............................................................................................................................................................. 9
3.8 Log.................................................................................................................................................................... 10
4. Other Menus................................................................................................................................................................ 11
1. Overview
This tool is mainly used for image burning during mass product. It supports empty platform burning, non-empty platform
easing and upgrading, large image burning (image file >1G), key burning. The tool features easy operation and simple
and intuitive UI.
Requirement on OS:
XP or Win 7
Close antivirus software
DC:
5V/2.0A DC power supply to PCBA
“Device ID” shows the related ports connected to hub. HUBx-4 means port #4. X shows the scanned hub number in
sequence when scanning the USB devices. It is not a fixed value.
Before start burning, the devices need to be well connected. First power on SSK HUB, connect HUB to USB port of PC
and enable the HUB ports which has platform connected. If it shows devices is successfully connected, the corresponding
LED of the port will turn green and in the main interface, the status of the related port under device ID will show “Connect
success”.
3.4 Burn
Click “Start” button to start the image burning. During the process, column “status” will show the percentage of the
progress and column “time” shows the time burning has used.
After finish burning, column “Status” shows light green when successfully. Otherwise it shows red. Column “Statistic”
represents “number of failure/Total burning number” of the current port”. In the example shown in Figure 2.5, 1 device is
burned at the current port and 0 fails.
At the bottom-right corner, it shows the statistics of all the ports. “Total“ shows the total number of burned devices ,
“Success” shows the number of success and “Error” shows the number of failure.
If re-burning is needed, please re-plug the device and the tool will start to burn automatically.
“Erase flash” means erasing flash. After checking, the user can select the erasing type from : Normal erase, Force erase,
Erase all and Force erase all. The default is Normal erase.
“Reset after success” means rebooting the device after successfully burnt. The default is not rebooting.
“Overwrite key” means overwriting the existing keys. The default is not overwriting.
3.7 Statistics
“Device ID” corresponds to the “Device ID” in burning status list. “HUBx-4” represents for port #4; “Time” for the local time
of finish or termination; “Result” for burning result.in format “[error code]message”. If successful, the error code will be
0x00000000. Otherwise it will be non-zero and the message will show the failure info. Double clicking result item will show
the log during the current hour.
3.8 Log
4. Other Menus
“Language” menu lists the UI language which is support. The current language is set to “English”.
“View” “Select”menu is for adding which columns will be shown in the status list, “Temperature setting” for temperature
setting Page.