JOB SAFETY ANALYSIS (JSA)

DATE : JOB TYPE :

PERMIT NO : WORK TEAM : NDT TECHNICIAN
PERMIT TYPE : X COLD WORK HOT WORK CONFINE SPACE

A) BEFORE WORK
NO JOB DESCRIPTION POTENTIAL HAZARDS CONTROLS
1 Preparing of work permit Conflict with other permit Read the permit and brief the workscope during permit
coordination meeting.
Miscommunication with other Ensure that other group understand our work scope and
workgroup location where the jobs to be done.
Permit violation Ensure the working permit is approved and signed by all
resprective supervisors.
Misplace / permit lost Ensure the work permit was properly kept to prevent lost
or misplaced.
2 Worksite inspection Congested area Familiarise work area such as blocking escape route to
emrgency assembly area.
Hot area Beware of hot air and high temperature and hot surface
at working area.
Unstable structure Beware of any unstable structure and report to responsible
person if necessary.
High pressure area Keep away of any high pressure equipment or system.

WHAT TO CHECK AND NOT LIMITED TO ANY SAFETY PROCEDURE OR WORK PERMIT
EXPERINECE YES NO
i) Have you done this job before? X
ii) Have you referred to any document related? (eg. drawing, etc..) X
iii) Are you knowledgeable with the job to be performed ? X
iv) Is supervision / experience assistant required? X

PROTECTIVE PERSONNEL EQUIPMENT (PPE) YES NO YES NO

Safety helmet X Ear plug X
Safety shoes X Ear muf
Safety glass X Respiratory protection
Safety glove Nomex / coverall X
Safety harness Others:
Safety mask i)
Safety goggle X ii)
 JOB SAFETY ANALYSIS (JSA)

DATE : JOB TYPE :

PERMIT NO : WORK TEAM : NDT TECHNICIAN
PERMIT TYPE : X COLD WORK HOT WORK CONFINE SPACE

A) DURING WORK
NO JOB DESCRIPTION POTENTIAL HAZARDS CONTROLS
1 Do inspection Hot surface / piping / item Beware of any hot surface / piping / item. Wear suitable PPE
for safety and follow provided safety procedure.
High noise area Wear ear protection such as recommended by supervisor.

Injury Beware when use tool / equipment / chemical that high risk
to cause injury. Familiarise with basic first aid procedure.
Hot area Minimize the working time at hot area.
Wear suitable PPE when work at hot area.
Falling object Wear suitable PPE and beware with any condition that
can cause falling object especially when working at height.
Falling from height Wear safety harness and avoid any action that high risk to
cause falling.
Electrical shock cause by tool Beware when use tool / equipment that can cause electrical
/ equipment shock. Do not use any malfunction electrical tool / equipment.
Electrical shock cause by condition / act Avoid any action that can cause electrical shock. Do not use
electrical equipment when in wet.
Chemical / gas leakage Always standby with chemical / gas protection tool or
equipment when there are risk of leakage at work site.
2 Measuring the findings Wrong measurement Measure in detail area.
Always use the approved and good tool / equipment.
C) AFTER WORK
NO JOB DESCRIPTION POTENTIAL HAZARDS CONTROLS
1 Housekeeping Messy working area Clean up working area. All tools / equipments must return to
their place except advised by person in charge.
Injury Ensure housekeeping was done properly. Use right tool /
equipment depend on type of housekeeping.
 Prepared By Reviewed By

Close out:
Name: Name:
Position: Position:
 JOB SAFETY ANALYSIS (JSA)

DATE : JOB TYPE : COMPUTED RADIOGRAPHY TESTING (CRT)

PERMIT NO : WORK TEAM : NDT TECHNICIAN
PERMIT TYPE : COLD WORK HOT WORK CONFINE SPACE

A) BEFORE WORK
NO JOB DESCRIPTION POTENTIAL HAZARDS CONTROLS
1 Preparing of work permit Conflict with other permit Read the permit and brief the workscope during permit
coordination meeting.
Miscommunication with other Ensure that other group understand our work scope and
workgroup location where the jobs to be done.
Permit violation Ensure the working permit is approved and signed by all
respective supervisors.
Misplace / permit lost Ensure the work permit was properly kept to prevent lost
or misplaced.
2 Worksite inspection Congested area Familiarise work area such as blocking escape route to
emergency assembly area.
Hot area Beware of hot air and high temperature and hot surface
at working area.
Unstable structure Beware of any unstable structure and report to responsible
person if necessary.
High pressure area Keep away of any high pressure equipment or system.

WHAT TO CHECK AND NOT LIMITED TO ANY SAFETY PROCEDURE OR WORK PERMIT
EXPERINECE YES NO
i) Have you done this job before?
ii) Have you referred to any document related? (eg. drawing, etc..)
iii) Are you knowledgeable with the job to be performed ?
iv) Is supervision / experience assistant required?

PROTECTIVE PERSONNEL EQUIPMENT (PPE) YES NO YES NO

Safety helmet Ear plug
Safety shoes Ear muf
Safety glass Respiratory protection
Safety glove Nomex / coverall
Safety harness Others:
Safety mask i)
Safety goggle ii)
 JOB SAFETY ANALYSIS (JSA)

DATE : JOB TYPE : COMPUTED RADIOGRAPHY TESTING (CRT)

PERMIT NO : WORK TEAM : NDT TECHNICIAN
PERMIT TYPE : COLD WORK HOT WORK CONFINE SPACE

B) DURING WORK
NO JOB DESCRIPTION POTENTIAL HAZARDS CONTROLS
1 Do inspection Hot surface / piping / item Beware of any hot surface / piping / item. Wear suitable PPE
for safety and follow provided safety procedure.
High noise area Wear ear protection such as recommended by supervisor.

Injury Beware when use tool / equipment / chemical that high risk
to cause injury. Familiarise with basic first aid procedure.
Hot area Minimize the working time at hot area.
Wear suitable PPE when work at hot area.
Falling object Wear suitable PPE and beware with any condition that
can cause falling object especially when working at height.
Falling from height Wear safety harness and avoid any action that high risk to
cause falling.
Electrical shock caused by tool Beware when use tool / equipment that can cause electrical
/ equipment shock. Do not use any malfunction electrical tool / equipment.
Electrical shock cause by condition / act Avoid any action that can cause electrical shock. Do not use
electrical equipment when in wet.
Chemical / gas leakage Always standby with chemical / gas protection tool or
equipment when there are risk of leakage at work site.
Radiation Beware with any radiation leakage during handle the
radioactive material.
Announce that the radiation work will start. Ensure that
non-radiation worker were not allowed to be at work area.
Setup the boundry and restrict with boundry tape and warning
sign or lamp.
Always use survey meter for safety purpose to measure the
radiation level.
Report immediately to person in charge for any accident
involving the radioactive material.
Follow right safety procedure for accident involving
radiaoactive material.
Use right and good tool / equipment for radiation work.
 JOB SAFETY ANALYSIS (JSA)

DATE : JOB TYPE : COMPUTED RADIOGRAPHY TESTING (CRT)

PERMIT NO : WORK TEAM : NDT TECHNICIAN
PERMIT TYPE : COLD WORK HOT WORK CONFINE SPACE

C) AFTER WORK
NO JOB DESCRIPTION POTENTIAL HAZARDS CONTROLS
1 Housekeeping Messy working area Clean up working area. All tools / equipments must return to
their place except advised by person in charge.
Injury Ensure housekeeping was done properly. Use right tool /
equipment depend on type of housekeeping.

Prepared By Reviewed By

Close out:
Name: Name:
Position: Position: