ARIA Fiber Optic Product Catalog

Fiber Optic Product Catalog
Web Edition
(925) 447-7500
www.ariatech.com
Download the
catalog onto
your smartphone DRIVEN BY CONNECTIONS
Fiber Optic Product Catalog i
ARIA Technologies DS-BS-1 04/12/2018
ARIA Technologies, a Woman Business

Enterprise (WBE) and California Certified
Small Business, is located in Livermore, CA
and has been in business for over 25 years.
CEO Paula McGuinness has been the owner
since inception. Our products are of the highest
quality, 100% tested, and conform to industry
standards including Telcordia GR-326-CORE
Issue 4, TIA 568, UL listing, RUS Listing,
and BAA certified (Buy American Act). Our
commitment to responsive, informative, timely,
and knowledgeable customer service and
support makes ARIA Technologies stand out California Woman Business Enterprise VON ID: 0FN00006
among suppliers. California Certified Small Business Supplier ID: 1790778
The USDA Rural Development has listed many

of our products, making them approved for use
in US Broadband Projects funded entirely or in
part by the USDA. Only the products which have
undergone successful trials and have content that
is primarily American made can qualify for these
listings.
ARIA Technologies products are compliant

with the Buy American provisions of the
American Reconstruction and Reinvestment
Act of 2009 (ARRA). For those companies using
stimulus dollars, Section 1605 of the American
Reconstruction and Reinvestment Act (ARRA),
also known as the Buy American provision,
requires that certain materials used in projects
funded by the act be manufactured in the US or
in specific foreign countries signatory to the Free
Trade Agreement (FTA) and the World Trade
Organization (WTO) Agreement.
102 Wright Brothers Ave Phone (925) 447-7500

Livermore, CA 94551 Fax (925) 447-7511
www.ariatech.com sales@ariatech.com
Fiber Optic Product Catalog ii
ARIA Technologies DS-BS-1 04/12/2018
Our products include fiber patch, splice, and combination patch & splice enclosures that are
wall mountable, rack mountable, indoor rated, and outdoor rated. ARIA Technologies offers the
most complete line of small 1-48 fiber patch & splice enclosures for drops to businesses, schools,
municipalities, hospitals, and customer premises. Customers enjoy doing business with ARIA
Technologies because of our high quality components and low costs. We are able to achieve this
because we manufacture the assemblies and components loaded inside our enclosures.
“Some of the most demanding end users such as

Data Centers, Collocation Hotels, CATV MSOs,
and Independent Telcos prefer ARIA Technologies
products for their important networks.”
-Paula McGuinness CEO ARIA Technologies, Inc.
ARIA’s Manufacturing Standards

ARIA Technologies utilizes a quality management system that meets or exceeds the ISO 9000 & TL
9000 international standards. We are determined to provide a quality experience for our customers.
ARIA’s Quality Policy

ARIA Technologies will meet customer requirements and promote corporate growth by delivering
defect-free products on-time and provide support through continual improvement that is prevention
based and customer focused.
ARIA’s Environmental Policy

ARIA Technologies is committed to the prevention of pollution. We minimize our negative impact
to the environment by adopting processes that conserve natural resources and raw materials.
ARIA products are manufactured with RoHS compliant materials. We will continually improve our
environmental management system, promote environmental awareness to our employees, and
comply with relevant legislation and regulations.

Livermore, CA 94551 Fax (925) 447-7511
Fiber Optic Product Catalog iii
Table of Contents DS-BS-1 04/12/2018
Wallmount Enclosures Fiber Optic Cable Assemblies

AWM Series ······························· 1 Fiber Optic Cable Assemblies ········ 81
Tri-Panel Series ·························· 5 Bend-Insensitive Cable Assemblies · 82
XWM-4X ···································· 9 Jumpers (Patch Cords) ················· 83
Compact Series ·························· 11 Outdoor Ruggedized Jumpers ······· 86
Network Interface Device (NID) ······ 15 MPO Trunk Cable Assemblies ········ 89
Fiber Gateway Panel (FGP) ··········· 17 Optical Amplifier Drop Cable
SMDU ······································· 19 Assemblies ································ 93
ODP·········································· 21 Interfacility Cable (IFC) Assemblies · 95
Mini Wallmount···························· 23 ODVA IP67 Rated Cable Assemblies 97
FiberPatch™······························· 26 FULLAXS IP67 Rated Cable
NEMA 4 Rated Outdoor Enclosure Assemblies ································ 100
(ODE) ······································· 32 FX IP67 Rated Cable Assemblies ··· 101
NEMA 4 Rated 4X ······················· 37
NEMA 4 Rated 8X························ 41 Connectors, Adapters (Bulkheads),
Optical Splice Entrance Cabinet Adapter Plates and Pigtail Fanouts
(OSEC) Series ···························· 44 LGX, CCH, & SMP Type Adapter
SPLWM Series ···························· 47 Plates and Pigtail Fanouts ············· 102
RapidConnect Mechanical Splice
Rackmount Enclosures Connectors ································ 105
LGX Patch & Splice Series ············ 49 Between Series Adapters ·············· 107
RDR Series ································ 54
RDP Series ································ 59 CWDM and DWDM Modules
RDA Series ································ 62 WDM Modules (CWDMs and
ARM Series · ······························· 64 DWDMs) ··································· 108
Modular Rackmount Panel (MRP) ··· 67 Micro HD CWDM Cassette ············ 112
Swing-Out Series ························ 70
HD Mini Cassette System·············· 73
High Density MPO (HDM) Series····· 79

Livermore, CA 94551 Fax (925) 447-7511
Fiber Optic Product Catalog iv
Table of Contents DS-BS-1 04/12/2018
Plug & Play and Splice Cassettes Optical Transceivers

MPO/MTP® Cassette Module ········· 114 10Gbps 10km Range 1310nm SFP+ 145
10Gpbs 10km Range 1310nm XFP 146
Splitters and Couplers 10Gbps 10km Range SFP+ ·········· 147
Splitters and Couplers ·················· 116 10Gbps 40km Range SFP+ CWDM 148
Planar Lightwave Circuit (PLC) 10Gbps 300m Range 850nm ········· 149
Splitter Cassettes ························ 117 QSFP+ Active Multimode Fiber
1RU Rackmount Splitter ··············· 119 Optic Cables ······························ 150
Enclosures for Splitters, Couplers, QSFP+ Active Singlemode Fiber
and WDMs ································ 121 Optic Cables ······························ 151
Attenuators Copper Products

Attenuators ································ 122 Cat 5e and Cat 6 Patch Cords ······· 152
LGX Adapter Plate for Keystone
Jacks ········································ 153
Inspecting, Cleaning, Splicing, and
SFP+ Passive Direct Attach Copper
Testing Equipment (DAC) Cables ····························· 154
Splice Trays ······························· 123 AT-1100 Series Media Converters ··· 156
Splice Sleeves (Single and Mass AT-2100 Series Media Converters ·· 158
Fusion) ····································· 125 AT-3011 Series Media Converters ··· 160
Launch Boxes · ···························· 126
Fiber Test Box (Network Simulation
System) ···································· 127
Resources
Precision Optical Fiber Cleaver ······ 128 MTP® Polarity Management ··········· 162
Connector Cleaning Products ········ 129 NEMA and IP Ratings ··················· 166
ECAM Product Support ················ 168
Indoor Cable ······························ 170
Cable Management & Cable Clamps Indoor/Outdoor Cable ··················· 174
Cable Clamps ····························· 133 Outdoor Cable ···························· 176
ARIA Lightpaths Raceway for Cable Connector Types ························· 183
Management ······························ 134
Cable Storage Ring · ····················· 143
Cable Identification Sleeves ··········· 144

Livermore, CA 94551 Fax (925) 447-7511
Fiber Optic Product Catalog 1
Wallmount Enclosures DS-BS-1 04/12/2018
AWM Series Wallmount Enclosures
AWM 2 AWM 4 AWM 8 AWM 12 AWM 18
Overview Features
AWM Series Wallmount Enclosures are utilized for • Units accommodate splice trays and LGX adapter
patching & splicing up to 432 fibers in an indoor setting. plates
• Double doors have a wide swing radius offering
AWM enclosures feature double doors that provide
maximum access to the enclosure interior and are
seperate access for patching and splicing.
lockable with the optional door lock kit
Panels are stackable and allow for top or bottom cable • Enclosures are constructed of steel and have a
entry. durable powder-coating
Specifications
AWM 2 AWM 4
Dimensions: 9”x14”x3.4” (HxWxD) Dimensions: 16”x15”x3.4” (HxWxD)
Capacity: Holds 2 adapter plates Capacity: Holds 4 adapter plates
6-Pack duplex SC or LC: 24 fibers 6-Pack duplex SC or LC: 48 fibers
6-Pack quad LC: 48 fibers 6-Pack quad LC: 96 fibers
Cable Entry Holes: 4 patch side (1.10”) and 4 Cable Entry Holes: 4 patch side (two 1.10” and two
splice side (1.10”) 1.25”) and 4 splice side (two 1.10” and two 1.50”)
Color: White Color: White

Livermore, CA 94551 Fax (925) 447-7511
AWM 8 AWM 12
Dimensions: 16”x20”x6.1” (HxWxD) Dimensions: 16”x20”x6.1” (HxWxD)
Capacity: Holds 8 adapter plates Capacity: Holds 12 adapter plates
6-Pack duplex SC or LC: 96 fibers 6-Pack duplex SC or LC: 144 fibers
6-Pack quad LC: 192 fibers 6-Pack quad LC: 288 fibers
Cable Entry Holes: 8 patch side (two 1.00” and six Cable Entry Holes: 8 patch side (two 1.00” and six
1.25”) and 8 splice side (two 1.00” and six 1.25”) 1.25”) and 8 splice side (two 1.00” and six 1.25”)
Color: White Color: White
AWM 8 & AWM 12 additional features: Patch side door and side panel are removable easing cassette
installation. The enclosure doors come standard with an attached padlock hasp. Wide enclosure provides
additional room for cassettes.
AWM 18
Dimensions: 16.1”x20.1”x8.5” (HxWxD)
Capacity: Holds 18 adapter plates
6-Pack duplex SC or LC: 216 fibers
6-Pack quad LC: 432 fibers
Cable Entry Holes: 8 patch side (six 1.00” and two
1.50”) and 8 splice side (six 1.00” and two 1.50”)
Color: ARIA Gray
AWM 18 additional features: Strengthened

dust resistant doors. The enclosure doors come
standard with an attached padlock hasp. Wide
enclosure provides additional room for cassettes.

Livermore, CA 94551 Fax (925) 447-7511

Accessories
Grounding and Bonding Kit Door Lock Kit for One Door Midspan Access Grommet for AWM 2
P/N: AWMGB-KIT P/N: C610-S P/N: MIDSPAN-G
Small Compression Fitting Medium Compression Fitting

Supports Cable O.D.: 0.200”-0.525” for AWM 8, 12, and 18 Supports Cable O.D.: 0.15”-0.70”
P/N: CF-SM for AWM 2, 4, 8, 12, and 18 (P/N: CF-MD)
Large Compression Fitting Three Slot Flat Drop Compression Fitting

Supports Cable O.D.: 0.425”-0.975” for AWM 4 and 18 with Removable Spacers for AWM 2, 4, 8, 12, and 18
P/N: CF-LG P/N: CF-3S-FD

Livermore, CA 94551 Fax (925) 447-7511

Part Number
AW M- - - - - - - - -
1 1 2 2 3 3 4 4 4 5 6 7 8 8 9 9 9 9
1 Enclosure 4 Adapter Type 7 Splice Trays

02 = AWM 2 Singlemode N = None
04 = AWM 4 SCU = SC/UPC Y = Yes*
08 = AWM 8 SCA = SC/APC
12 = AWM 12 LCU = LC/UPC *AWM 2 enclosures come standard
18 = AWM 18 LCA = LC/APC with 4”x7” splice trays and all other
FCU = FC/UPC AWM models come standard with 4”x8”
FCA = FC/APC splice trays in 24 fiber single fiber fusion
or 6 position ribbon fiber mass fusion
2 Adapter Plate Type STU = ST/UPC
configurations.
06 = 6 Port (SC/FC/ST) Multimode
08 = 8 Port (SC/FC/ST) SCM = SC
12 = 12 Port (SC/LC/FC/ST) LCM = LC 8 Stub Cable Type
24 = 24 Port (LC) FCM = FC
STM = ST Leave Blank for No Stub
Indoor
3 Adapter Plate Quantity IR = Riser Rated
5 Pigtail IP = Plenum Rated
01 = 1 Plate 02 = 2 Plates IA = Interlocking Armor Plenum Rated
03 = 3 Plates 04 = 4 Plates N = No Pigtail
05 = 5 Plates 06 = 6 Plates M = 900 μm in Mesh Indoor/Outdoor
07 = 7 Plates 08 = 8 Plates D = Distribution Style (MIC) XR = Riser Rated
09 = 9 Plates 10 = 10 Plates R = Ribbon in Mesh XP = Plenum Rated
11 = 11 Plates 12 = 12 Plates Note: 3 meter pigtail XC = Central Tube Riser Rated
13 = 13 Plates 14 = 14 Plates length is standard Outdoor
15 = 15 Plates 16 = 16 Plates
ON = Non-Armored
OA = Armored Central Tube
6 Fiber Type OL = Armored Loose Tube
AJ = Non-Armored Alternative Jacket
Singlemode OR = Ribbon Armored Central Tube
S = SMF-28e+ FD = Flat Drop
B = SMF Bend
Insensitive
G.657.A1
9 Stub Length
Multimode
1 = 62.5/125μm OM1 Leave Blank for No Stub
2 = 50/125μm OM2 Add -PE for a Pulling Eye
3 = 50/125μm OM3 XXXF = XXX Feet
4 = 50/125μm OM4 XXXM = XXX Meters

Livermore, CA 94551 Fax (925) 447-7511
Tri-Panel Series Wallmount Enclosures

Tri-Panel enclosures feature two compartments for
splicing and patching.
The compact and intuitive design requires less space

and provides easy access to the connectors.
Tri-Panels are ideal for use when a compact, wall

mountable, patch, splice, and storage enclosure is
required such as drops to commercial customers, cell
sites, hospitals, or anywhere separate compartments
are needed to separate/demarc patch and splice areas.
Features
• The patch and splice compartments are separated and make efficient use of wall space
• The fiber pigtails are well organized and easily accessible
• Intuitive design supports simple customer cable entry, organization, splicing, and patching
• ARIA coupler, splitter, CWDM, and DWDM cassettes are supported
• Single door design requires less wall space
Tri-Panels are available
• Angled adapter plate mounting surface makes it easy to access the connectors
as a “pre-term panel”
• Sizable splicing compartment provides ample room for pigtail storage and protection with a connectorized stub
TRI-2X
Dimensions: 7”x12”x4.1” (HxWxD)
Weight: 3.0lbs
6-Pack quad LC: 48 fibers (ribbon only)
Cable Entry Holes: 2 patch side (1.50”)
and 2 splice side (1.18”)

Livermore, CA 94551 Fax (925) 447-7511

TRI-4X
Weight: 4.0lbs
TRI-6X
Weight: 4.5lbs

Livermore, CA 94551 Fax (925) 447-7511

Tri-Panel 2X with Support for Microduct Available
Weight: 3.0lbs
Cable Entry Holes: 2 patch side (1.50”) and 2 splice side (2.4” or
knockout to 2.9”)
Black Color Available
TRI-2X TRI-4X TRI-6X
Accessories
Medium Compression Fitting Large Compression Fitting for Patch Three Slot Flat Drop Compression
Supports Cable O.D.: 0.15”-0.70” Compartment Supports Cable O.D.: Fitting with Removable Spacers
P/N: CF-MD 0.425”-0.975” (P/N: CF-LG) P/N: CF-3S-FD

Livermore, CA 94551 Fax (925) 447-7511

Accessories
Door Lock Kit for Splice Compartment Door Lock Kit for Patch Compartment Midspan Access Grommet
P/N: TRI-SS-LOCK P/N: TRI-PS-LOCK P/N: MIDSPAN-G
Part Number
TRI - - - - - - - - - -
1 1 2 2 3 4 4 4 5 6 7 8 9 9 10 10 10 10
1 Enclosure 4 Adapter Type 6 Fiber Type 9 Stub Cable Type

2X = Tri-2X Singlemode Singlemode Leave Blank for No Stub
4X = Tri-4X SCU = SC/UPC S = SMF-28e+
6X = Tri-6X SCA = SC/APC B = SMF Bend Indoor
LCU = LC/UPC Insensitive IR = Riser Rated
LCA = LC/APC G.657.A1 IP = Plenum Rated
IA = Interlocking Armor
2 Adapter Plate Type FCU = FC/UPC
Multimode Plenum Rated
FCA = FC/APC
06 = 6 Port (SC/FC/ST) STU = ST/UPC 1 = 62.5/125μm OM1
2 = 50/125μm OM2 Indoor/Outdoor
08 = 8 Port (SC/FC/ST) XR = Riser Rated
12 = 12 Port (SC/LC/ Multimode 3 = 50/125μm OM3
SCM = SC 4 = 50/125μm OM4 XP = Plenum Rated
FC/ST) XC = Central Tube Riser
24 = 24 Port (LC) LCM = LC
FCM = FC Rated
STM = ST 7 Splice Trays Outdoor
3 Adapter Plate N = None
ON = Non-Armored
Quantity OA = Armored Central Tube
5 Pigtail Y = Yes* OL = Armored Loose Tube
1 = 1 Plate *These enclosures AJ = Non-Armored
N = No Pigtail Alternative Jacket
2 = 2 Plates comes standard with
M = 900 μm in OR = Ribbon Armored
3 = 3 Plates 4”x8” splice trays in
Mesh Central Tube
4 = 4 Plates 24 fiber single fiber
D = Distribution FD = Flat Drop
5 = 5 Plates fusion or 6 position
Style (MIC)
6 = 6 Plates ribbon fiber mass
R = Ribbon in
Mesh fusion configurations.
10 Stub Length
Note: 3 meter pigtail
Leave Blank for No Stub
length is standard 8 Color Add -PE for a Pulling Eye
B = Black XXXF = XXX Feet
W = White XXXM = XXX Meters

Livermore, CA 94551 Fax (925) 447-7511
XWM-4X Wallmount Enclosure
Overview Specifications
The XWM-4X is a compact wall mount fiber optic
Parameter Value
distribution enclosure designed to support patching and/or
splicing. Dimensions (H”xW”xD”) 11.4 x 14.2 x 4.2
Weight 10 lbs
The unit has the capacity to accept 4 LGX-type adapter Fiber Capacity 48 fibers SC or 96 fibers LC
plates allowing for the termination of a variety of connector
Cable Entry Four 1.175” Openings
types and fiber counts of up to 48 SC or 96 LC.
Material 16 Gauge Steel
The unit has a key-lockable drop-down-door splice Finish Black electrostatically
compartment which serves as a work shelf for splicing. applied powder coat
The patch side door comes equipped with a padlock hasp

for additional security.
Accessories
Grounding and Bonding Kit Medium Compression Fitting Supports Three Slot Flat Drop Compression
P/N: AWMGB-KIT Cable O.D.: 0.15”-0.70” Fitting with Removable Spacers
P/N: CF-MD P/N: CF-3S-FD

Livermore, CA 94551 Fax (925) 447-7511
XWM-4X Wallmount Enclosure

Part Number
XW M -4 X- - - - - - - -
1 1 2 3 3 3 4 5 6 7 7 8 8 8 8
1 Adapter Plate Type 4 Pigtail 7 Stub Cable Type

06 = 6 Port (SC/FC/ST) N = No Pigtail Leave Blank for No Stub
08 = 8 Port (SC/FC/ST) M = 900 μm in Mesh
12 = 12 Port (SC/LC/FC/ST) D = Distribution Indoor
24 = 24 Port (LC) Style (MIC) IR = Riser Rated
R = Ribbon in Mesh IP = Plenum Rated
Plenum Rated
2 Adapter Plate
Quantity length is standard
Indoor/Outdoor
XR = Riser Rated
1 = 1 Plate XP = Plenum Rated
2 = 2 Plates 5 Fiber Type XC = Central Tube Riser
3 = 3 Plates Rated
Singlemode
4 = 4 Plates
S = SMF-28e+ Outdoor
B = SMF Bend ON = Non-Armored
Insensitive
3 Adapter Type G.657.A1
OL = Armored Loose Tube
Singlemode Multimode AJ = Non-Armored
SCU = SC/UPC 1 = 62.5/125μm OM1 Alternative Jacket
SCA = SC/APC 2 = 50/125μm OM2 OR = Ribbon Armored
LCU = LC/UPC 3 = 50/125μm OM3 Central Tube
LCA = LC/APC 4 = 50/125μm OM4 FD = Flat Drop
FCU = FC/UPC
FCA = FC/APC
STU = ST/UPC
6 Splice Trays 8 Stub Length
Multimode Leave Blank for No Stub
N = None
SCM = SC Add -PE for a Pulling Eye
Y = Yes*
LCM = LC
FCM = FC *This enclosure XXXF = XXX Feet
STM = ST comes standard with XXXM = XXX Meters
4”x8” splice trays in
24 fiber single fiber
fusion or 6 position
ribbon fiber mass
fusion configurations.

Livermore, CA 94551 Fax (925) 447-7511
Compact Series Wallmount Enclosures

Compact Series Wallmount Enclosures are small
wallmount enclosures that features patch and splice
capabilities.
The enclosures also support 12 fiber MPO to LC

connector plug and play functionality and can accomodate
splitter modules.
The compact enclosure sizes allow for minimal wall space

consumption.
The enclosures provide cable entry grommets and

gasketed lids for superior weather resistance.
Features Splitter Support

• Indoor/outdoor rated for wall mounting
• Material: White UV resistant PC and ABS 1x8 Splitter
• Hinged and gasketed lid fits securely on the base
providing a water and dust proof seal (IP65 Rated) Outputs
ready for
• Lid closes securely with a self locking mechanism patching
(comes with a custom key)
• The grounding device is isolated within the cabinet Input fiber
ready for
• Dust and waterjet proof (IP65 rated which is splicing
comparable to a NEMA 4X rating)
CWME-4 CWME-8
Dimensions: 7.3”x4.6”x1.6” (HxWxD) Dimensions: 8.4”x6.4”x1.9” (HxWxD)
Patch & Splice Capacity: 4 fiber SC or 8 fibers LC Patch & Splice Capacity: 8 fiber SC or 16 fibers LC
Pre-Term Capacity: 6 fiber SC or 12 fibers LC Pre-Term Capacity: 8 fiber SC or 16 fibers LC
Plug & Play Capacity: 6 fiber SC or 12 fibers LC Plug & Play Capacity: 8 fiber SC or 16 fibers LC
Cable Entry Holes: 1 (0.375”) and 4 (0.16”x0.14”) Cable Entry Holes: 1 (0.5”) and 4 (0.9”x0.5”)
CWME-4 Additional Features: Pad Lockable CWME-8 Additional Features: Compression Fitting

Livermore, CA 94551 Fax (925) 447-7511

Compact Size
CWME-4 CWME-8
CWME-4 Configurations
Patch and Splice MPO Plug & Play Pre-Terminated
CWME-8 Configurations
Patch and Splice MPO Plug & Play Pre-Terminated

Livermore, CA 94551 Fax (925) 447-7511

CWME-4 Interior View
Tab for Wallmounting Radius guide for
(1 of 2) fiber management
(1 of 4)
Hinge for Splice
Tray (1 of 2) Removable
lid
LC Adapters
Secure Door
Hole for Padlock Fastener
Weatherproof
Clamp for Grounding Gasket for Door
or OSP Cable Door Latch
Strength Member (1 of 2)
Clamp for OSP
Cable Jacket
OSP Cable Clamp for Patchcord Cable
Entry Grommet Patchcords Entry Grommet
CWME-8 Interior View
PLC Splitter Splice Tray
Weatherproof
Gasket for Door Radius guide for
fiber management
LC Adapters Fan-out Kit for

PLC Splitter
Clamp for Grounding

Door Latch
or OSP Cable
(1 of 2)
Strength Member
Clamp for OSP
Patchcord Cable Cable Jacket
Entry Grommet Compression
(1 of 4) Fitting for
OSP Cable
Door Latch
(1 of 2)
Shown loaded with a 1x16 PLC Splitter

Livermore, CA 94551 Fax (925) 447-7511

Accessories
CWME-8 Pole Mounting Brackets

P/N:: CWME-8-PMB
Part Number
CW M E- - - - - -
1 2 2 2 2 2 3 4 5 5 6 6 6 6
1 Enclosure Type 3 Pigtail, MPO, or 5 Stub Cable Type

Splitter
4 = CWME-4 Leave Blank for No Stub
8 = CWME-8 N = No Pigtail Indoor
9 = 900 μm IR = Riser Rated
P = Plug and Play IP = Plenum Rated
2 Fiber Count & Standard MPO
Adapter Type E = Plug and Play Indoor/Outdoor
Elite MPO XR = Riser Rated
CWME-4 Options S = Splitter XP = Plenum Rated
04SCU = 4 Fiber SC/UPC
04SCA = 4 Fiber SC/APC Note: 2 meter pigtail Outdoor
06SCU = 6 Fiber SC/UPC length is standard FD = Flat Drop
06SCA = 6 Fiber SC/APC on the CWME-4
08LCU = 8 Fiber LC/UPC and 3 meter pigtail
08LCA = 8 Fiber LC/APC length is standard 6 Stub Length
12LCU = 12 Fiber LC/UPC on the CWME-8
12LCA = 12 Fiber LC/APC Leave Blank for No Stub
Add -PE for a Pulling Eye
CWME-8 Options
08SCU = 8 Fiber SC/UPC
4 Fiber Type
08SCA = 8 Fiber SC/APC N = No Pigtail XXXF = XXX Feet
12LCU = 12 Fiber LC/UPC S = SMF-28e+ XXXM = XXX Meters
12LCA = 12 Fiber LC/APC B = SMF Bend
16LCU = 16 Fiber LC/UPC Insensitive
16LCA = 16 Fiber LC/APC G.657 A/B

Livermore, CA 94551 Fax (925) 447-7511
Network Interface Device (NID) Wallmount Enclosures

Network Interface Device (NID) Wallmount Enclosures are
low profile and full-featured housings that are constructed
of materials capable of withstanding harsh indoor and
outdoor conditions, such as UV degradation, chemical
exposure, and sub-freezing temperatures.
Designed for wall mounting, the NID-4 will accommodate

up to 8 fiber terminations and the NID-12 will
accommodate up to 12 fiber terminations, with or without
splicing.
Hinges hold the door in the open position for service and
the door seal securely protects the contents from moisture
and foreign matter intrusion. Cable entry ports are also
sealed.
Useful for demarcation points, telecommunications rooms,

and equipment rooms. This product is UL 497 listed.
NID-4 NID-12
Dimensions: Dimensions:
10.22”x5.64”x2.73” (HxWxD) 8.54”x10.00”x2.88” (HxWxD)
Capacity: Capacity:
Simplex SC: 2 fibers or LC: 4 fibers 6-Pack duplex SC or LC: 12 fibers
Duplex SC: 4 fibers or LC: 8 fibers
Unique Features:
Available as a single or dual door enclosure.
Door is available with a weatherproof gasket.

Livermore, CA 94551 Fax (925) 447-7511
Network Interface Device (NID) Wallmount Enclosures

Features
• Capable of withstanding harsh indoor and outdoor conditions
• Inlcudes one 12-fiber splice tray and accommodates up to 8 or 12 terminations depending upon the model
• Flexible grommets seal cable entry ports
• Secure fit provides maximum protection from the elements and foreign matter intrusion
• Hinged lockable door allows convenient access to all components
• Unique detent/release mechanism provides easy installation and servicing by holding the door open
Part Number
NID- - - - - - -
1 1 2 2 3 3 4 4 4 4 4 5 6 7
1 Enclosure 4 Adapter Type 6 Fiber Type

04 = NID-4 Singlemode Singlemode
12 = NID-12 SCUPC = SC/UPC S = SMF-28e+
SCAPC = SC/APC B = SMF Bend
LCUPC = LC/UPC Insensitive
2 Door Type LCAPC = LC/APC G.657.A1
SS = Single Door without gasket Multimode
1 = 62.5/125μm OM1
5 Pigtail
DS = Double Door without gasket
(NID-12 Only) 2 = 50/125μm OM2
SG = Single Door with gasket N = No Pigtail 3 = 50/125μm OM3
(NID-12 Only) M = 900 μm in 4 = 50/125μm OM4
DG = Double Door with gasket Mesh
(NID-12 Only) D = Distribution
Style (MIC) 7 Splice Trays
3 Port Quantity Note: 3 meter pigtail N = None
length is standard Y = Yes*
02 = 2 Port (SC)
(NID-4 Only) *These enclosures
04 = 4 Port (SC/LC) come standard with
(NID-4 Only) a 3”x5” splice tray in
06 = 6 Port (SC) a 12 fiber single fiber
(NID-12 Only) fusion configuration.
08 = 8 Port (SC/LC)
(SC: NID-12 Only)
(LC: NID-4 Only)
12 = 12 Port (SC/LC)
(NID-12 Only)

Livermore, CA 94551 Fax (925) 447-7511
Fiber Gateway Panel (FGP) Wallmount Enclosure
The Fiber Gateway Panel (FGP) Wallmount Enclosure is a compact unit which features slack storage and seperate entry
points for connectivity between the OSP fiber drop and customer fiber drop.
Configurable for up to 12 fiber terminations as a demarcation point between outdoor fiber drop and customer premise fiber
The integrated and removable splice tray assembly supports easy installation for patch or patch & splice options.
The rugged plastic housing cover closes securely with 3/8” hex head bolt and has a provision for a padlock.
Features
• Constructed of superior materials capable of
withstanding harsh outdoor environments, including:
UV degradation, chemical exposure, and extreme
temperatures
• Entry grommets accept up to 1 inch conduit and
feature tie downs for proper strain relief of fiber cables
• Hinged cover fits securely on the base to provide
maximum protection against environmental conditions
and intrusion of foreign matter, protecting sensitive
fiber connectivity
• Meets Telcordia GR-771 Generic Requirements for
Fiber Optic Splice Closures
• Additional cable entry grommets on the rear of the
enclosure support polemount cable passthrough

Livermore, CA 94551 Fax (925) 447-7511
Fiber Gateway Panel (FGP) Wallmount Enclosure

Dimensions
10.26 8.48
2.91
5.000
.93
1.31
1.00
9.93
Dimensions are in Inches
Part Number
F G P- - - -
1 1 2 2 2 3 4
1 Adapter Plate Type 2 Adapter Type 3 Pigtail 4 Fiber Type

06 = 6 Port (SC/FC/ST) Singlemode N = No Pigtail Singlemode
08 = 8 Port (SC/FC/ST) SCU = SC/UPC M = 900 μm in Mesh S = SMF-28e+
12 = 12 Port (SC/LC/ SCA = SC/APC D = Distribution Style (MIC) B = SMF Bend
FC/ST) LCU = LC/UPC R = Ribbon in Mesh Insensitive
LCA = LC/APC G.657.A1
Multimode length is standard Multimode
SCM = SC 1 = 62.5/125μm OM1
LCM = LC 2 = 50/125μm OM2
3 = 50/125μm OM3
4 = 50/125μm OM4

Livermore, CA 94551 Fax (925) 447-7511
SMDU Wallmount Enclosure

The SMDU Wallmount Enclosure is a patch only or
patch and splice indoor wallmount enclosure with the
capability of housing up to four 1x8 splitters.
When used as a splitter enclosure they provide a

distribution point where OSP or Distribution cables can
be spliced to preloaded PON Splitters housed inside
the unit.
The panel includes removable grounding or strain

relief lugs.
The enclosure is made of ABS plastic and the lid is

pad-lockable.
Capacity
Six cable entry openings (two 0.61”, two 0.81”, and two
0.95”) and their associated compression fittings are
provided to enable multiple locations for incoming OSP
or Distribution Cable and Patchcords.
Enclosure Dimensions: 11.8 x 10.4 x 3.1 (H”xW”xD”).
Fiber Capacity: 24 fiber SC with 1 Splice Tray or

32 fiber LC with 2 Splice Trays
Splitter Specifications
Parameter Value
Operating Wavelength (nm) 1260-1650
Fiber Type G.657.A1
Insertion Loss (dB) 10.2
Loss Uniformity (dB) 0.8
Polarization Dependent Loss (dB) 0.2
Return Loss (dB) 55
Directivity (dB) 55
Wavelength Dependent Loss (dB) 0.5
Device Dimension (mm) 60 x 7 x 4

Livermore, CA 94551 Fax (925) 447-7511
SMDU Wallmount Enclosure

Part Number
SM D U - - - - - - -
1 2 2 2 3 4 5 6 6 7 7 7 7
1 Enclosure Application 4 Fiber Type 6 Stub Cable Type

0 = Patch/Splice Application Singlemode Leave Blank for No Stub
1 = One 1x8 Splitter (SC/LC) S = SMF-28e+
2 = Two 1x8 Splitters (SC/LC) B = SMF Bend Indoor
3 = Three 1x8 Splitters (SC/LC) Insensitive IR = Riser Rated
4 = Four 1x8 Splitters (LC) G.657.A1 IP = Plenum Rated
Multimode Plenum Rated
1 = 62.5/125μm OM1
2 Adapter Type 2 = 50/125μm OM2 Indoor/Outdoor
3 = 50/125μm OM3 XR = Riser Rated
Singlemode XP = Plenum Rated
SCU = SC/UPC 4 = 50/125μm OM4
XC = Central Tube Riser
SCA = SC/APC Rated
LCU = LC/UPC
LCA = LC/APC 5 Splice Trays Outdoor
ON = Non-Armored
Multimode N = None OA = Armored Central Tube
SCM = SC Y = Yes* OL = Armored Loose Tube
LCM = LC AJ = Non-Armored
*This enclosure comes
standard with 4”x7” splice Alternative Jacket
trays in 24 fiber single OR = Ribbon Armored
3 Pigtail fiber fusion or 4 position Central Tube
ribbon fiber mass fusion FD = Flat Drop
N = No Pigtail
M = 900 μm in Mesh configurations.
D = Distribution
Style (MIC) 7 Stub Length
R = Ribbon in Mesh Leave Blank for No Stub
Note: 3 meter pigtail Add -PE for a Pulling Eye
length is standard XXXF = XXX Feet
XXXM = XXX Meters

Livermore, CA 94551 Fax (925) 447-7511
ODP Wallmount Enclosure
The ARIA ODP Wallmount Enclosure is compact and features patch and splice capabilities.
The enclosure provides the user with separate compartments and ample bending radius guides for improved fiber
management.
The unit is configurable for up to 12 fiber terminations.
It features a rugged plastic housing with separate entry points for OSP fiber and customer fiber.
Features
• Indoor/outdoor rated for wall mounting
• Dimensions: 8.85 x 7.85 x 2.55 (H”xW”xD”)
• Provides a clamping solution for feeder cable, drop cable, fiber splicing, fixation, storage, and distribution all in one
• Constructed of superior materials capable of withstanding harsh outdoor environments including: UV degradation,
chemical exposure, and extreme temperatures
• Up to 12 fiber ports for OSP to customer fiber transitions
• Hinged cover fits securely on the base providing a water and dust proof seal (IP65 Rated)
• Cover closes securely with a self locking mechanism (comes with a custom key)
• The grounding device is isolated within the cabinet

Livermore, CA 94551 Fax (925) 447-7511
ODP Wallmount Enclosure

Cable Routing
Accessories
ODP Pole Mounting Brackets

P/N: ODP-PMB
Part Number
O D P- - -
1 1 1 2 3
1 Adapter Type 2 Pigtail 3 Fiber Type

Singlemode N = No Pigtail Singlemode
SCU = SC/UPC M = 900 μm in Mesh S = SMF-28e+
SCA = SC/APC D = Distribution Style (MIC) B = SMF Bend
LCU = LC/UPC Insensitive
LCA = LC/APC G.657.A1
length is standard
Multimode Multimode
SCM = SC 1 = 62.5/125μm OM1
LCM = LC 2 = 50/125μm OM2
3 = 50/125μm OM3
4 = 50/125μm OM4

Livermore, CA 94551 Fax (925) 447-7511
Mini Wallmount Enclosure

The Mini Wallmount fiber patch & splice enclosure can
patch & splice up to 24 fibers LC and 12 fibers SC in
Singlemode or Multimode configurations.
These compact sized enclosures can be supplied fully

loaded with adapter panels, pigtails, a splice sleeve holder,
and a pre-terminated stub cable or as a plug and play
module with an MTP adapter or pigtails.
100% tested for insertion and return loss.
Available in CCH or LGX size formats.
Features
• Simply loosen the thumbscrews (CCH) or flip the
latches (LGX) and open the door to gain access to the
internal components
• Enclosures can be pre-terminated for patching only or
supplied with a splice chip for patching and splicing
capability
• Enclosures are wall mountable and are also rack
mountable with optional rackmount brackets
Component Layout
Adapter Adapter
Plate Plate
Splice
Chip
Adapter Adapter
Zip Tie Fiber Zip Tie

Cable to Connectors Cable to
enclosure enclosure
Fiber
Pigtails
Cable Cable Cable Cable

Entry Fibers Entry Fibers
Grommet Grommet
Patch Only or Pre-Term Patch & Splice

Livermore, CA 94551 Fax (925) 447-7511

LGX or CCH Format
LGX Format: 5.51”x6.25”x1.25” (HxWxD) CCH Format: 6.25”x5.32”x1.45” (HxWxD)
Accessories
Loaded CCH Mini
Wallmount Shown
with Shroud Attached
CCH Mini Wallmount CCH Mini Wallmount with Extra Small Compression Mini Wallmount Rackmount
Shroud DIN Rail Mounting Clip (see Fitting Supports Flat Bracket Kit
P/N: SHROUD-MWM-BLK part number configuration Drop Cable for LGX Mini LGX P/N: LGXMWMRMKIT
on the next page) Wallmount (P/N: CF-XS-FD) CCH P/N: CCHMWMRMKIT
Extra Small Compression Small Compression Fitting Medium Compression Three Slot Flat Drop Com-
Fitting Supports Cable O.D.: Supports Cable O.D.: Fitting Supports Cable O.D.: pression Fitting with Remov-
0.175”-0.370” for LGX Mini 0.200”-0.525” for CCH Mini 0.15”-0.70” for CCH Mini able Spacers for CCH Mini
Wallmount (P/N: CF-XS) Wallmount (P/N: CF-SM) Wallmount (P/N: CF-MD) Wallmount (P/N: CF-3S-FD)

Livermore, CA 94551 Fax (925) 447-7511

Part Number
MW M - - - - - - - -
1 2 2 3 3 3 4 5 6 6 7 7 7 7 8 8 8
1 Format 4 Pigtail 6 Stub Cable Type

L = LGX N = No Pigtail Leave Blank for No Stub
C = CCH 9 = 900 μm
M = 900 μm in Mesh Indoor
R = Ribbon in Mesh IR = Riser Rated
IP = Plenum Rated
2 Adapter Plate Type T = MTP Adapter
IA = Interlocking Armor Plenum Rated
(CCH Only)
06 = 6 Port (SC/FC/ST) Indoor/Outdoor
08 = 8 Port (SC/FC/ST) Note: 3 meter pigtail
length is standard XR = Riser Rated
12 = 12 Port (SC/LC/FC/ST) XP = Plenum Rated
24 = 24 Port (LC) XC = Central Tube Riser Rated
5 Fiber Type Outdoor

3 Adapter Type Singlemode
ON = Non-Armored
Singlemode S = SMF-28e+ OL = Armored Loose Tube
SCU = SC/UPC B = SMF Bend AJ = Non-Armored Alternative Jacket
SCA = SC/APC Insensitive OR = Ribbon Armored Central Tube
LCU = LC/UPC G.657.A1 FD = Flat Drop
LCA = LC/APC Multimode
FCU = FC/UPC 1 = 62.5/125μm OM1
FCA = FC/APC
STU = ST/UPC
2 = 50/125μm OM2 7 Stub Length
3 = 50/125μm OM3
4 = 50/125μm OM4 Leave blank for No Stub
Multimode Add -PE for a Pulling Eye
SCM = SC
LCM = LC XXXF = XXX Feet
FCM = FC XXXM = XXX Meters
STM = ST
8 DIN Rail Mounting

Clip Installed
Leave Blank for No DIN

Rail Mounting Clip
DIN = DIN Rail Mounting
Clip Installed
(CCH Only)

Livermore, CA 94551 Fax (925) 447-7511
FiberPatch™
FiberPatch™ is a compact fiber optic module that is
supplied with adapters for connector patching on one end
and a pre-terminated cable pigtail for splicing on the other
end.
Fiber counts up to 48 and lengths as long as 1 km can be

supplied with OFNR, OFNP, interlocking armor plenum,
indoor/outdoor, OSP non-armored, OSP armored, flat
drop, or alternative jacket cable.
This unique product can eliminate splicing at the building

entrance, customer premise, or cell tower cabinet. It only
requires splicing in a manhole/OSP splice case or building
demarcation point.
Instead of installing conduit, pulling fiber through it, and

then splicing pigtails, FiberPatch™ can be supplied as a
system with cable, conduit, connectors, and an enclosure.
Features
• ARIA FiberPatch™ is mountable in a variety of hardware and is offered with many pre-terminated cable options.
• FiberPatch™ is offered in LGX, CCH, and 2X formats. The LGX and CCH formats can be installed in any rackmount
or wallmount enclosure that supports LGX or CCH type cassettes.
• FiberPatch™ is compact and minimizes the use of crucial rack or wall space. The dimensions for the LGX format are:
4.0 x 5.1 x 1.1 (H”xW”xD”), the dimensions for the CCH format are: 3.8 x 6.1 x 1.4 (H”xW”xD”), and the dimensions for
the 2X format are: 4.0 x 10.5 x 1.1 (H”xW”xD”).
FiberPatch™ is provided on a reel when it is supplied with FiberPatch™ with Non-Armored Alternative Jacket Cable
a cable length of at least 250 ft and Pulling Eye Shown

Livermore, CA 94551 Fax (925) 447-7511
FiberPatch™
Applications: MDU Drops to Customer Premises
FiberPatch™
SPLWM
Series
Wallmount
Enclosure
In this instance, the Pre-terminated FiberPatch™ is located In this instance, the Pre-terminated FiberPatch™ is located
at the customer premises and the spooled indoor/outdoor at the customer premises and the spooled OFNR or OFNP
cable is routed outside to the manhole and spliced. cable is routed to the basement or building entry point and
is spliced in an indoor rated splice-only enclosure (ARIA
This method eliminates the costly splicing of fibers at both SPLWM shown above).
the building entrance and at the customer premises which
results in savings of thousands of dollars in labor and Another splice is performed at the manhole in an OSP
materials as well as faster customer hook-up. Splice Case.
Applications: Drops to ITS Cabinets

Cabinets or cell tower shelter
racks can sometimes be loaded
to capacity leaving no room for FiberPatch™
rack mount enclosures.
The ARIA FiberPatch™ provides

the perfect solution to this
problem.
Drop
Just mount the compact ARIA Underground Cable
FiberPatch™ on the wall and Splice Enclosure
route the cable to manholes or
where splice cases are located
for transition to backbone cables.
Drop Cable

Livermore, CA 94551 Fax (925) 447-7511
FiberPatch™
Mounting Options
Wallmount brackets can be utilized Open top Wallmount/Rackmount Open top Wallmount/Rackmount
to mount FiberPatch™ directly onto a brackets can be utilized to mount brackets can be utilized to mount
wall multiple modules on a wall multiple modules in a rack
Open top Wallmount/Rackmount The shroud accessory protects the The shroud with door accessory
brackets can be utilized to mount mul- patchcords from damage when the protects the patchcords and allows
tiple modules in a cell tower cabinet FiberPatch™ is mounted on a wall quick access to them after installation
Wallmount brackets can be utilized to mount the 2X The LGX FiberPatch™ and 2X FiberPatch™ Wallmount/
FiberPatch™ directly onto a wall Rackmount Bracket can be utilized to mount an LGX
FiberPatch™ and a 2X FiberPatch™ on a wall or in a rack

Livermore, CA 94551 Fax (925) 447-7511
FiberPatch™
2X FiberPatch™
The ARIA 2X FiberPatch™ supports up to 24 fibers SC or
48 fibers LC.
It is twice as wide as the standard LGX FiberPatch™ and

it has two locations for pre-terminated cable assemblies to
exit on the back of the cassette.
The enclosure size of the ARIA 2X FiberPatch™ is

4.0 x 10.5 x 1.1 (H”xW”xD”).
Need MPO/MTP® Connectivity?

ARIA’s MPO/MTP® Cassette Module is similar to LC Duplex
FiberPatch™ but provides an MPO/MTP® adapter on the Connector
rear of the cassette instead of the pre-terminated stub.
This feature allows the module to interconnect MPO/

MTP® backbones and patch cords.
This product is available in the following configurations:

12 Fiber SC to 12 Fiber MPO/MTP®
12 Fiber LC to 12 Fiber MPO/MTP® MPO/MTP®
24 Fiber LC to Dual 12 Fiber MPO/MTP® Connector
Accessories
LGX FiberPatch™ and 2X FiberPatch™ Wallmount/ FiberPatch™ and 2X FiberPatch™ Wallmount Bracket
Rackmount Bracket - P/N: 2X1 LGX W-R BRACKET-OT P/N: (Ordered with FiberPatch™ Part Number)
19”-23” Extension Bracket for 1RU Wallmount/Rackmount 19”-23” Extension Bracket for 2RU Wallmount/Rackmount
Bracket (P/N: 19-23-REB-1RU-ALUM) Bracket (P/N: 19-23-REB-2RU-STL0

Livermore, CA 94551 Fax (925) 447-7511
FiberPatch™
Accessories (Continued)
3 Module 1RU LGX Wallmount/Rackmount Bracket 2 Module 1RU CCH Wallmount/Rackmount Bracket
P/N: 3XLGXW-RBRACKET-B-OT P/N: 2XCCHW-RBRACKET-B-OT
6 Module 2RU LGX Wallmount/Rackmount Bracket 4 Module 2RU CCH Wallmount/Rackmount Bracket
P/N: 6XLGXW-RBRACKET-B-OT P/N: 4XCCHW-RBRACKET-B-OT
2 Module LGX Wallmount Bracket 2 Module CCH Wallmount Bracket LGX FiberPatch™ Shroud with Door
P/N: 2XLGXWMBRACKET-B-OT P/N: 2XCCHWMBRACKET-B-OT P/N: AFP-LGX-SHROUD-WD
LGX FiberPatch™ Shroud CCH FiberPatch™ Shroud CCH FiberPatch™ Shroud with Door
P/N: AFP-LGX-SHROUD P/N: AFP-CCH-SHROUD P/N: AFP-CCH-SHROUD-WD

Livermore, CA 94551 Fax (925) 447-7511
FiberPatch™
Part Number
AF P- - - - - - - -
1 1 1 2 2 3 3 3 4 5 5 6 6 6 6 7 7 8 8
1 Format 4 Fiber Type 6 Stub Cable Length

LGX = LGX FiberPatch™ Singlemode XXXF = XXX feet
CCH = CCH FiberPatch™ S = SMF-28e+ XXXM = XXX meters
2XF = 2X FiberPatch™ B = SMF Bend
Insensitive
G.657.A1 7 Pulling Eye
2 Port Count Multimode PE = Pulling Eye
06 = 6 Port (SC/FC/ST) 1 = 62.5/125μm OM1 NP = No Pulling Eye
08 = 8 Port (SC/FC/ST) 2 = 50/125μm OM2
12 = 12 Port (SC/LC/FC/ST) 3 = 50/125μm OM3
24 = 24 Port (FiberPatch™: LC 4 = 50/125μm OM4
8 Wallmount Bracket
or 2X FiberPatch™: SC)
48 = 48 Port (2X FiberPatch™: LC) WB = Wallmount Bracket
5 Stub Cable Type
Included
NB = No Wallmount Bracket
3 Adapter Type Leave Blank for No Stub Included
Singlemode Indoor
SCU = SC/UPC IR = Riser Rated
SCA = SC/APC IP = Plenum Rated
LCU = LC/UPC IA = Interlocking Armor Plenum Rated*
LCA = LC/APC
Indoor/Outdoor
FCU = FC/UPC
XR = Riser Rated
FCA = FC/APC
XP = Plenum Rated
STU = ST/UPC
XC = Central Tube Riser Rated
Multimode Outdoor
SCM = SC ON = Non-Armored
LCM = LC OA = Armored Central Tube
FCM = FC OL = Armored Loose Tube
STM = ST AJ = Non-Armored Alternative Jacket
OR = Ribbon Armored Central Tube
FD = Flat Drop
*Only available in CCH formats

Livermore, CA 94551 Fax (925) 447-7511
NEMA 4 Rated Outdoor Enclosure (ODE)
Overview Specifications
The ARIA NEMA 4 Rated Outdoor Enclosure (ODE) is
Parameter Specification
designed for environments where durability, security, and
weather resistance are required. Dimensions (H”xW”xD”) 15.3” x 9.5” x 4.3”
Weight (Empty) 5 lb or 2.2 kg
The ODE can be supplied with a pre-terminated drop cable, Environmental Rating NEMA 4
ODVA adapters, or a splitter module (up to 1x32). The
Enclosure Material 0.08” thick aluminum
enclosure supports up to 24 fibers SC or 48 fibers LC.
Finish Gray powdercoat
The bottom of the ODE features knockouts that support Mounting Options Pole and wall mountable
compression fittings or adapters for ODVA Style IP67 Rated
Bottom Cable Entry Holes Six 1.10” knockouts and
Cable Assemblies. There is also a knockout on the rear of
one 1.50” knockout
the enclosure that accepts an optional weatherproof gasket
for securely transitioning cable to the inside of a pole. Rear Cable Entry Holes One 2.0” knockout
Security Features Pad lockable lid, option for
The outer pad-lockable door and wallmount brackets can torx security lid screws,
be supplied with Torx Security fasteners for enhanced option for torx security
security. wallmount screws
Splitter Support
Splice Sleeve
Holder Knockout Knockout
Removed Removed
Pigtail for and Medium and Large
splicing Compression Compression
Fitting for Fitting for
1x32 Splitter OSP Cable Patch Cords
Module Installed Installed

Livermore, CA 94551 Fax (925) 447-7511

Bottom Cable Entry
Knockout Removed
and Large
Compression Fitting for
Patch Cords Installed
Knockout Removed
and Medium
Compression Fitting for
OSP Cable Installed
Rear Cable Entry
Knockout
Removed and
Gasket for
Rear Cable
Entry Installed
Compatible with ODVA IP67 Rated Cable Assemblies
The bottom side of the enclosure features knockouts that are compatible with ODVA Style IP67 Rated Cable Assemblies

Livermore, CA 94551 Fax (925) 447-7511

Configuration with Microduct Support Available
Input fiber from splitter

spliced to OSP cable
1x32 splitter
cassette
Microduct for pushable

fiber to connect to
splitter output
Waterproof
cable entry
Unique Features
• Larger enclosure to support patching with angled cassette position and splitter input fiber splicing
• Bottom cable entry only support with one 1.1” knockout and two 1.6” knockouts
Angled Cassette Supports Port Inspection and Cable Entry Ports

Cleaning Access
OSP Cable
Microduct assemblies with support
for a total of 32 pushable fibers

Livermore, CA 94551 Fax (925) 447-7511

Features
Wallmounting brackets are
welded onto the wallmount
body
Neoprene gasket
Removable lid Concealed head pem nut

to attach the internal plate
onto the wallmount body
Strain relief lug
to attach a 2.0” knockout accepts
strength member gasket for pole mounting
Locking bracket is
welded onto the
Bridge lance to attach wallmount body
cable entering the
enclosure (1 of 8)
0.50” hole for
padlock
Internal plate
Hole to accept
Adapter Plate fiber mgmt.
rings (1 of 10)
Wallmount body
Exploded
Isometric 1.1” knockout to accept 1.5” knockout to accept
View an ARIA medium size an ARIA large size
compression fitting (1 of 6) compression fitting
Accessories
*Not Compatible
with Pole Mount
Brackets
Medium Compression Three Slot Flat Drop Large Compression Gasket for Rear Side Cable
Fitting Supports Ca- Compression Fitting Fitting Supports Cable Entry using a Attachment Bracket
ble O.D.: 0.15”-0.70” with Rem. Spacers Cable O.D.: 0.425”- 10” Pole* (P/N: ODE- P/N: ODE-SCAB
P/N: CF-MD P/N: CF-3S-FD 0.975” (P/N: CF-LG) REAR-GASKET)
Torx Security Bit Torx Security Driver Tap for Direct Pole Pole Mount Brackets 15” Diameter Pole
P/N: TS-M6-B with Bit Mounting P/N: PMB-KIT Mount Straps
P/N: TS-M6-D P/N: M6-1-TAP P/N: PMB-STRAPS

Livermore, CA 94551 Fax (925) 447-7511

Part Number
O D E- - - - - - - - -
1 1 2 2 3 3 4 4 4 5 5 5 6 7 8 8 9 9
1 Enclosure Fasteners 5 ODVA Adapters 8 Stub Cable Type

P2 = Phillips Drive for lid and 000 = No ODVA Adapters Leave Blank for No Stub
wallmounting Singlemode
T2 = Torx Security Drive for lid OLU = ODVA Style LC/UPC Indoor
and wallmounting OLA = ODVA Style LC/APC IR = Riser Rated
T6 = Torx Security Drive for lid Multimode IP = Plenum Rated
and metal pole mounting OLM = ODVA Style LC IA = Interlocking Armor Plenum Rated
Indoor/Outdoor
XR = Riser Rated
2 Adapter Plate Type 6 Pigtail for ODVA Adapters XP = Plenum Rated
XC = Central Tube Riser Rated
00 = None N = No ODVA Adapters
06 = 6 Port (SC/FC/ST) M = 900 μm in Mesh Outdoor
08 = 8 Port (SC/FC/ST) D = Distribution Style (MIC) ON = Non-Armored
12 = 12 Port (SC/LC/FC/ST) R = Ribbon in Mesh OA = Armored Central Tube
24 = 24 Port (LC) OL = Armored Loose Tube
Note: 3 meter pigtail AJ = Non-Armored Alternative Jacket
length is standard OR = Ribbon Armored Central Tube
3 Adapter Plate Quantity FD = Flat Drop
00 = None 7 Fiber Type

01 = 1 Plate
Singlemode 9 Stub Cable Length
02 = 2 Plates
S = SMF-28e+ Leave blank for No Stub
B = SMF Bend Add -PE for a Pulling Eye
Insensitive
4 Adapter Type G.657.A1 RXXXF = XXX Feet Exiting Rear
000 = None BXXXF = XXX Feet Exiting Bottom
Multimode RXXXM = XXX Meters Exiting Rear
Singlemode 1 = 62.5/125μm OM1
SCU = SC/UPC BXXXM = XXX Meters Exiting Bottom
2 = 50/125μm OM2
SCA = SC/APC 3 = 50/125μm OM3
LCU = LC/UPC 4 = 50/125μm OM4
LCA = LC/APC
FCU = FC/UPC
FCA = FC/APC
STU = ST/UPC
Multimode
SCM = SC
LCM = LC
FCM = FC
STM = ST

Livermore, CA 94551 Fax (925) 447-7511
NEMA 4 Rated 4X Wallmount Enclosure
The ARIA NEMA 4 Rated 4X Wallmount Enclosure is a fiber optic patch and splice enclosure designed for environments
where durability, security, and weather resistance are required.
The enclosure is NEMA 4 rated, has a gasketed and pad-lockable outer door, and an inner lockable splice compartment
door for enhanced network security and weather protection.
The outer pad-lockable door is secured with 7/16” hex bolt fasteners.
Specifications
Parameter Value
Dimensions (H”xW”xD”) 11.9 x 14.0 x 4.75 (14.3 x 15.0 x 4.75 with brackets)
Weight (lbs) 8.5 (empty)
Termination Capacity 4 LGX adapter plate or 48 fiber capacity
(96 fiber when using ribbon fiber and LC connectors)
Material 12 gauge aluminum
Finish Pre-treated with a chromate conversion coating and painted with a gray polyester
powder coating for corrosion resistance
Mounting Options Pedestal, pole, and wall mountable

Livermore, CA 94551 Fax (925) 447-7511

Weather Resistance
The NEMA 4 Rated 4X Wallmount Enclosure utilizes a gasketed and pad-lockable outer door and an inner lockable splice
compartment door for enhanced network security and weather protection.
Cable Entry
Six 1.10” knockouts and three 1.50” knockouts provide
nine cable entry/exit holes on the bottom of the enclosure
and accommodate single or multi-drop cables.
These knockouts support 1” conduit, medium

compression fittings, and large compression fittings.
Grounding
This panel features dual post internal grounding lugs, 6
position exterior grounding lugs, and a grounded door.
The 6 position exterior grounding lugs are shown here.
6 position exterior grounding lugs

Livermore, CA 94551 Fax (925) 447-7511

Pre-Terminated Option Available
ARIA’s NEMA 4 Rated 4X Wallmount Enclosure can be
provided with a pre-terminated drop cable.
This eliminates the need to splice fibers within the

enclosure.
This also reduces the time required for installation and

reduces the cost of labor associated with installation.
ARIA offers the following pre-terminated cable types:

• Distribution Style Riser or Plenum Rated
• Interlocking Armor Plenum Rated
• Indoor/Outdoor Riser or Plenum Rated
• Indoor/Outdoor Ribbon
• Outside Plant Armored or Non-Armored
• Outside Plant Ribbon
• Non-Armored Alternative Jacket
Accessories
Medium Compression Fitting Three Slot Flat Drop Compression Large Compression Fitting
Supports Cable O.D.: 0.15”-0.70” Fitting with Removable Spacers Supports Cable O.D.: 0.425”-0.975”
P/N: CF-MD P/N: CF-3S-FD P/N: CF-LG

Livermore, CA 94551 Fax (925) 447-7511

Part Number
N EM A 4 X- - - - - - - -
1 1 2 3 3 3 4 5 6 7 7 8

2 Adapter Plate
Indoor/Outdoor
Quantity length is standard
XR = Riser Rated
XP = Plenum Rated
1 = 1 Plate XC = Central Tube Riser Rated
2 = 2 Plates 5 Fiber Type
3 = 3 Plates Outdoor
Singlemode ON = Non-Armored
4 = 4 Plates
S = SMF-28e+ OA = Armored Central Tube
B = SMF Bend OL = Armored Loose Tube
Insensitive
OR = Ribbon Armored Central Tube
Singlemode Multimode FD = Flat Drop
SCU = SC/UPC 1 = 62.5/125μm OM1
LCU = LC/UPC 3 = 50/125μm OM3 8 Stub Length
LCA = LC/APC 4 = 50/125μm OM4
FCU = FC/UPC Leave Blank for No Stub
FCA = FC/APC Add -PE for a Pulling Eye
6 Splice Trays
STU = ST/UPC
XXXF = XXX Feet
XXXM = XXX Meters
Multimode N = None
SCM = SC Y = Yes*
LCM = LC
FCM = FC *This enclosure
STM = ST comes standard with
ribbon fiber mass

Livermore, CA 94551 Fax (925) 447-7511
The ARIA NEMA 4 Rated 8X Wallmount Enclosure is designed for environments where durability, security, and weather
resistance are required.
It is NEMA 4 rated and has a gasketed and pad-lockable outer door.
The enclosure is manufactured out of aluminum and coated with polyester powder coating for corrosion resistance.
Features
• This enclosure features eight LGX adapter plates, cable management radius guides, dual post internal grounding
lugs, 6 position exterior grounding lugs, and a grounded door.
• Pedestal, pole, or wall-mountable.
• Patching and splicing capacity of 96 fibers. It can support 192 fibers when using ribbon fiber and LC connectors.
• Dimensions: 15.00”x17.75”x7.00” (HxWxD) (19.1” height with brackets)
Cable Entry
Two 1.10” knockouts, two 1.50” knockouts, and two 2.45”
knockouts provide six cable entry/exit holes on the bottom
of the enclosure and accommodate single or multi-drop
cables.
These knockouts support 1” conduit, 2” conduit, medium

compression fittings, and large compression fittings.

Livermore, CA 94551 Fax (925) 447-7511

ECAM Product Support
The ARIA NEMA 4 Rated 8X Wallmount Enclosure supports
ECAM (External Cable Assembly Module) connectivity.
The ECAM connector features weatherproof connectivity

and supports simple product installation and re-entry.
Features
ECAM shown installed
• No special tools required on the ARIA NEMA 8X
• Indoor and outdoor use Wallmount Enclosure
• Waterproof seal using an ARIA ECAM
• Easy and quick plug and play type installation Receptacle
• Rugged design
ECAM installed on an ARIA NEMA 8X Wallmount Enclosure A cover plate is installed when an ECAM is not used

Livermore, CA 94551 Fax (925) 447-7511

Accessories
Part Number
N EM A 8 X- - - - - - - -
1 1 2 3 3 3 4 5 6 7 7 8

2 Adapter Plate Quantity

Indoor/Outdoor
length is standard
XR = Riser Rated
1 = 1 Plate 5 = 5 Plates
XP = Plenum Rated
3 = 3 Plates 7 = 7 Plates 5 Fiber Type XC = Central Tube Riser Rated
4 = 4 Plates 8 = 8 Plates Singlemode Outdoor
S = SMF-28e+ ON = Non-Armored
B = SMF Bend OA = Armored Central Tube
3 Adapter Type Insensitive OL = Armored Loose Tube
G.657.A1 AJ = Non-Armored Alternative Jacket
SCU = SC/UPC Multimode FD = Flat Drop
SCA = SC/APC 1 = 62.5/125μm OM1
LCA = LC/APC
FCU = FC/UPC
3 = 50/125μm OM3
4 = 50/125μm OM4
8 Stub Length
FCA = FC/APC Leave Blank for No Stub
STU = ST/UPC Add -PE for a Pulling Eye
6 Splice Trays XXXF = XXX Feet
Multimode
SCM = SC N = None XXXM = XXX Meters
LCM = LC Y = Yes*
FCM = FC *This enclosure comes standard with 4”x8” splice trays in 24 fiber
STM = ST single fiber fusion or 6 position ribbon fiber mass fusion configurations.

Livermore, CA 94551 Fax (925) 447-7511
Optical Splice Entrance Cabinet (OSEC) Series Splice Wallmount Enclosures

ARIA Optical Splice Entrance Cabinets allow the user to sort
and organize the splicing of pre-terminated (stubbed) riser
cables from fiber patch panels to outside plant trunk cables
at a building entrance.
OSEC cabinets are dust proof, water resistant, and con-

structed of aluminum, with a durable powder coated finish.
The full size gasketed door offers maximum access to the OSEC 4 OSEC 8 OSEC 12
enclosure interior during installation and service.
Features
• Cable entry holes feature protective removable caps
• OSEC 4 and OSEC 8 drop-down door serves as a work table
• Wall or unistrut mountable
• Organize and manage optical fiber splices between outside plant and indoor cable routed to cross-connect equipment
• Can be installed in a building entrance facility or an outside plant vault as a cable pull box and/or a cable splice
enclosure
• Corrosion resistant aluminum construction, heavy-duty door with gasket, and robust hinges and latches protect fiber
• Six position grounding block and fiber management rings
• Individual access to each splice tray
OSEC 4
Part Number: OSEC4-STD
Dimensions: 13.7”x21.4”x11.0”
(HxWxD)
Capacity: Holds 4 molded splice
trays (864 fibers mass fusion or
192 fibers single fusion)
Cable Entry: 24 Openings (four
horseshoe, fourteen 1.2”, six 1.5”)
Unique Features: Strain relief
lugs for cable attachment and
horseshoe-shaped openings for
mid-span access

Livermore, CA 94551 Fax (925) 447-7511

OSEC 8
(HxWxD)
Cable Entry: 24 openings (four
horseshoe, sixteen 1.2”, six 1.5”)
Unique Features: Strain relief
lugs for cable attachment and
horseshoe-shaped openings for
mid-span access
OSEC 12
(HxWxD)
Cable Entry: 13 openings (one
0.88”, six 1.25”, six 1.50”)
Unique Features: Lift-off reversible
door with document holder, ability
to store up to 10 meters of OSP
cable, and multi-section radius Wallmount brackets can be reversed for rackmount applications
guides to store and segregate fiber.
OSEC 4/8/12 Accessories

Livermore, CA 94551 Fax (925) 447-7511

OSEC 4/8 Accessories
48 Fiber Single Fusion Splice Tray 216 Fiber Mass Fusion Splice Tray
P/N: AT1B-F/F P/N: AT1B-MF/MF
12A1 Cable Clamp for Metallic Sheath Cable 12A2 Cable Clamp for Dielectric Sheath Cable
P/N: 104-384-490-SRE-W P/N: 106-230-337-SRE-W
12A3 Cable Clamp for 0.25”-1.25” Padlock Kit for the Door Latch Assem- Lock Kit (OSEC 4 Only)
Diameter Cable (P/N: 108-527-423) bly (P/N: O-PADLOCK-KIT) P/N: TRI-PS-LOCK
OSEC 12 Accessories
12 Fiber Single Fusion 24 Fiber Single Fusion 72 Fiber Mass Fusion Splice Grounding and Bonding Kit
Splice Tray (4”x6”) Splice Tray (4”x8”) Tray (4”x8”) P/N: OSECGB-KIT
P/N: 4612CWMP P/N: 4824CWMP P/N: 4872RCWM

Livermore, CA 94551 Fax (925) 447-7511
SPLWM Series Splice Wallmount Enclosures

These compact fiber splice enclosures are ideal for
wall mounting indoors.
The rear-hinged, 16 gauge steel, pad lockable door

provides quick access to the enclosure interior.
The riser cable entrance slot accommodates most

OSP cables (Outer Diameters up to .71”) and makes it
easy to mount cable where riser cables already exist.
Slack storage space behind the splice trays provides

simple cable re-entry and access.
Features
• Spacious splice only wallmount enclosure allows for ample cable slack
• Multiple cable entry ports support a wide variety of cable diameters
• Easy to access and re-enter the enclosure
• Attached padlock hasp and lock kit option provides enhanced security
SPLWM-1
Part Number: SPLWM-1
Capacity: 4 - 4”x6”, 2 - 4”x7”, or 3 - 4”x8” splice trays
Single Fusion Splicing: 72 fibers
Mass Fusion Splicing: 216 fibers
Cable Entry: Eight 1.10” openings
SPLWM-2
Cable Entry: 8 openings (four 1.00” and four 1.25”)

Livermore, CA 94551 Fax (925) 447-7511
SPLWM Series Splice Wallmount Enclosures

SPLWM-3
Cable Entry: 12 openings (four 1.00” and eight 1.25”)
Accessories
Small Compression Fitting Supports Cable Medium Compression Fitting Supports Three Slot Flat Drop Compression
O.D.: 0.200”-0.525” for SPLWM-2/3 Cable O.D.: 0.15”-0.70” Fitting with Removable Spacers
P/N: CF-SM P/N: CF-MD P/N: CF-3S-FD
Grounding and Bonding Kit Lock Kit 12 Fiber Single Fusion Splice 24 Fiber Single Fusion Splice
P/N: AWMGB-KIT P/N: AWM-LOCK-KIT Tray (4”x6”) Tray (4”x7”)
P/N: 4612CWMP P/N: 4724CWMPST
72 Fiber Mass Fusion Splice Tray (4”x7”) 24 Fiber Single Fusion Splice Tray (4”x8”) 72 Fiber Mass Fusion Splice Tray (4”x8”)
P/N: 4772CWMPST P/N: 4824CWMP P/N: 4872RCWM

Livermore, CA 94551 Fax (925) 447-7511
Rackmount Enclosures DS-BS-1 04/12/2018
LGX Patch & Splice Series Rackmount Enclosures

LGX Patch & Splice Series Rackmount Enclosures are available in 12 to
1728 fiber configurations. They are typically composed of a stack of multiple
termination shelves and one splice shelf. Each fiber termination shelf is
equipped with adapter panels and fanouts. Each splice shelf is equipped
with mass fusion or single fusion splice organizers. All of the shelves are
secured together in the factory, shipped, and installed as a single unit.
The unconnectorized end of each fanout is routed from the rear of the
termination shelf down to the splice shelf and into the splice organizers.
The unconnectorized end is positioned in the organizer ready for mass
fusion or single fusion splicing. The unconnectorized end of each fanout is
clearly identified to correspond to a termination shelf and to the connector
positions within that shelf. The splice shelf and organizers are located at the
bottom of the assembly, in the position most convenient for splicing. Pre-Terminated Panel Shown
Example Configurations
6 Pack SC Simplex: 12 Pack SC Duplex: 6 Pack SC Simplex: 8 Pack SC Simplex: 12 Pack SC Duplex:
24 Fibers 48 Fibers 72 Fibers 96 Fibers 144 Fibers
6 Pack SC Simplex: 216 Fibers 6 Pack SC Simplex: 432 Fibers 12 Pack SC Simplex: 864 Fibers

Livermore, CA 94551 Fax (925) 447-7511

Individual Enclosures
5.25” Patch & Splice (SC: 48 Fiber or LC: 96 Fiber Capacity) 5.25” Splice Only (144 Fiber Single Fiber or
(48 Fiber Single Fiber or 18 Position Ribbon Fiber Capacity) 54 Position Ribbon Fiber Capacity)
7.00” Patch Only 7.00” Splice Only

SC: 144 Fiber or LC: 288 Fiber Capacity (108 Position Ribbon Fiber Capacity)
8.75” Patch Only 8.75” Splice Only (288 Fiber Single Fiber or
SC: 144 Fiber or LC: 288 Fiber Capacity 108 Position Ribbon Fiber Capacity)

Livermore, CA 94551 Fax (925) 447-7511

Features
• Industry leading fiber management supports
convenient user accessibility
• Easy network build with on-bay splicing
• Enclosures can be built without cable stubs
eliminating riser requirements and cost
• All panels are 17” wide and 11” deep
• Fits 19”, 23”, or ETSI frames
• LGX Patch & Splice Series Rackmount
Enclosures only require mounting to the network
frame, reducing installation time and cost
• Modular units allow for rapid network growth with
Bend radius guides protect
matching hardware in various configurations
patchcords from kinks and
• All pigtails are labeled for easy identification increased attenuation
Specifications
Parameter Value
Enclosure Material and Finish Aluminum sheet metal powder coated putty white
Mounting 19” or 23” (mounting brackets can be reversed to accommodate either)
Dimensions for 24, 48 fiber (HxWxD) 5.25” x 17” x 11”
Dimensions for 72, 96 fiber (HxWxD) 12.00” x 17” x 11”
Dimensions for 144 fiber (HxWxD) 14.00” or 21.00” x 17” x 11”
Applications
• Central office frames: LGX FDF, 23-
inch and 19-inch wide mount frames
• Local Area Networks (LANs)
• Controlled Environment Vaults (CEV)
• Cable TV Headend
• Enterprise
Patch enclosures feature plexiglass Splice enclosures utilize aluminum
• Private Networks doors doors

Livermore, CA 94551 Fax (925) 447-7511

Black Color Available
5.25” Patch & Splice 7.00” Patch Only 7.00” Splice Only 8.75” Splice Only
Accessories
12A1 Cable Clamp for Metallic Sheath 12A2 Cable Clamp for Dielectric 12A3 Cable Clamp for 0.25”-1.25”
Cable and for Sheath Cable and for 0.400” to 0.999” Diameter Cable
0.400” to 0.999” Diameter Cable Diameter Cable P/N: 108-527-423
P/N: 104-384-490-SRE-W P/N: 106-230-337-SRE-W
Flushmount Brackets for 5.25” Shelf Flushmount Brackets for 7.00” Shelf Flushmount and Strain Relief
P/N: LGX5INFMB P/N: LGX7INFMB Bracket Kit for 7.00” Shelf in a Fiber
Distribution Frame

Livermore, CA 94551 Fax (925) 447-7511

Part Number
LGX - - - - - - - - - - -
1 2 3 4 4 5 6 6 6 7 8 9 9 10 10 10 10 11
1 Color 6 Adapter Type 9 Stub Cable Type

W = White 000 = Unloaded or Splice Only Leave Blank for No Stub
B = Black
Singlemode Indoor
SCU = SC/UPC IR = Riser Rated
2 Patch Shelf SCA = SC/APC IP = Plenum Rated
LCU = LC/UPC IA = Interlocking Armor
0 = Splice Only LCA = LC/APC Plenum Rated
5 = 5.25” Patch and Splice Shelf* FCU = FC/UPC
7 = 7.00” Patch Shelf FCA = FC/APC Indoor/Outdoor
9 = 8.75” Patch Shelf STU = ST/UPC XR = Riser Rated
XP = Plenum Rated
*Only available as a standalone panel XC = Central Tube Riser
Multimode
SCM = SC Rated
3 Patch Shelf Quantity LCM = LC Outdoor

FCM = FC ON = Non-Armored
0 = Splice Only STM = ST OA = Armored Central Tube
1 = 1 Patch Shelf OL = Armored Loose Tube
2 = 2 Patch Shelves
3 = 3 Patch Shelves 7 Pigtail AJ = Non-Armored
Alternative Jacket
4 = 4 Patch Shelves N = Unloaded or Splice Only OR = Ribbon Armored
5 = 5 Patch Shelves M = 900 μm in Mesh Central Tube
6 = 6 Patch Shelves D = Distribution Style (MIC) FD = Flat Drop
R = Ribbon in Mesh
4 Adapter Plate Type Note: 3 meter pigtail length is standard 10 Stub Length
00 = Unloaded or Splice Only Leave Blank for No Stub
06 = 6 Port (SC/FC/ST) 8 Fiber Type Add -PE for a Pulling Eye
08 = 8 Port (SC/FC/ST)
12 = 12 Port (SC/LC/FC/ST) N = Unloaded or Splice Only XXXF = XXX Feet
XXXM = XXX Meters
Note: Only 12 Port SC available Singlemode
for 8.75” Patch Shelves S = SMF-28e+
B = SMF Bend Insensitive 11 Stub Direction
G.657.A1
5 Splice Shelf Multimode
0 = Patch Only or Pre-Term 1 = 62.5/125μm OM1 LR = Enters Lower Right

5 = 5.25” Splice Shelf 2 = 50/125μm OM2 LL = Enters Lower Left
7 = 7.00” Splice Shelf 3 = 50/125μm OM3 UR = Enters Upper Right
9 = 8.75” Splice Shelf 4 = 50/125μm OM4 UL = Enters Upper Left

Livermore, CA 94551 Fax (925) 447-7511
RDR Series Rackmount Enclosures
1RU 2RU 4RU
ARIA RDR Series rackmount panels feature a unique removable sliding tray which permits working at a comfortable level.
RDR enclosures are available in 14” or 17” depths and in 1RU, 2RU, or 4RU formats with each providing a different
amount of space to maneuver and store fibers.
RDR panels are supplied fully loaded with adapter plates, pigtails, splice trays, and mounting brackets for 19” racks. 1RU
and 4RU enclosures are compatible with both 19” and 23” racks. Recessed or flush mount brackets are also available.
The sliding tray features radius guides to secure slack and prevent kinks and the fiber pigtails are managed at the proper
curvature to prevent attenuation.
ARIA RDR Series enclosures accept LGX type adapter plates. 2RU and 4RU size enclosures accept LGX type cassettes
supporting a wide range WDMs, splitters, and couplers. 1RU size enclosures will accept LGX type cassettes if their radius
guides are removed or when they are ordered with the Cassette Ready option.
Removable lids and doors ease component installation.
17” deep 2RU and 4RU enclosures feature an extended sliding tray. The extended sliding tray design increases
component accessibility by moving the locking mechanism for the sliding tray to the front of the panel.
1RU, 2RU, and 4RU Formats
1RU Capacity: 36 fibers SC or 2RU Capacity: 72 fibers SC or 4RU Capacity: 144 fibers SC or
72 fibers LC (ribbon only) 144 fibers LC (ribbon only) 288 fibers LC (ribbon only)

Livermore, CA 94551 Fax (925) 447-7511

1RU
Dimensions:
14” or 17” Deep Panels are Available
14” Deep: 1.75”x17.00”x14.00” (HxWxD)
17” Deep: 1.75”x17.00”x17.00” (HxWxD)
Capacity:
Holds 3 LGX adapter plates
Options:
Cassette Ready, Rodent Proof, and Cut Top Lid
2RU
Dimensions:
14” or 17” Deep Panels are Available
14” Deep: 3.50”x17.00”x14.00” (HxWxD)
17” Deep: 3.50”x17.00”x17.00” (HxWxD)
Capacity:
Holds 6 LGX adapter plates
Options:
Rodent Proof
4RU
Dimensions:
7.00”x17.00”x17.00” (HxWxD)
Capacity: Holds 12 LGX adapter plates

Options:
Rodent Proof
4RU additional features: Includes threaded posts

and a hold down strap to secure the splice trays

Livermore, CA 94551 Fax (925) 447-7511

Latching, Sliding, and Removable Tray System
A spring latch on the rear side of the The sliding tray in the forward position The sliding tray can be removed and
sliding tray when lifted permits the tray provides access to the splice trays and brought to a comfortable level on a
to slide forward or backward the connectors for splicing, cleaning, table or workstation for easy access to
and testing the splice trays and connectors
Rodent Proof Option
The front and rear side cable entry holes are protected from rodent entry with protector plates.
Also, the rear door is provided with no cable entry openings.
1RU Cassette Ready Option
Standard 1RU 14” RDR Cassette Ready 1RU 14” RDR

Livermore, CA 94551 Fax (925) 447-7511

Cut Top Lid Option
The front lid features a cutout that provides enhanced connector

access and visibility
Accessories
Flush Mount Brackets for 1RU 14” Flush Mount Brackets for 1RU 17” Flush Mount Brackets for 2RU 17”
P/N: 1RU14D-FMBKIT P/N: 1RU17D-FMBKIT P/N: 2RU-17D-FMBKIT
Strain Relief Bracket 19”-23” Extension Bracket for 2RU 17” Perforated L-Bracket on Sliding Tray
P/N: STD-SRB-KIT P/N: 19-23-REB-2RU-STL for 1RU 14”, 2RU 17” Rodent P., and
4RU (P/N: 1RU-TRAY-L-BRACKET)
Door Lock Kit for 1RU Door Lock Kit for 2RU and Bottom Entry Strain Relief Extended Strain Relief
P/N: 1RU-LOCK-KIT 4RU (P/N: C610-S) Bracket (P/N: BE-SRB-KIT) Bracket (P/N: EX-SRB-KIT)

Livermore, CA 94551 Fax (925) 447-7511

R DR - - - - - - - - - -
1 1 2 2 3 3 4 4 5 5 5 6 7 8 9 9 10
1 Option 5 Adapter Type 8 Splice Trays

00 = No Option Singlemode N = None
RR = Rodent Proof SCU = SC/UPC Y = Yes*
CR = Cassette Ready* SCA = SC/APC
RT = Cassette Ready LCU = LC/UPC *1RU & 2RU enclosures come standard
with Cut Top Lid* LCA = LC/APC with 4”x8” splice trays in 24 fiber single
CP = Cassette Ready FCU = FC/UPC fiber fusion or 6 position ribbon fiber mass
with Rodent Proof* FCA = FC/APC fusion configurations. 4RU enclosures
CT = Cut Top Lid* STU = ST/UPC come standard with 5.5”x12.0” splice trays
in 36 fiber single fiber fusion or 16 position
*1RU Only Multimode ribbon fiber mass fusion configurations.
SCM = SC
LCM = LC
2 Enclosure FCM = FC 9 Stub Cable Type
STM = ST
41 = 14” 1RU Leave Blank for No Stub
71 = 17” 1RU
42 = 14” 2RU Indoor
72 = 17” 2RU 6 Pigtail IR = Riser Rated
74 = 17” 4RU IP = Plenum Rated
N = No Pigtail IA = Interlocking Armor Plenum Rated
M = 900 μm in Mesh
D = Distribution Indoor/Outdoor
3 Adapter Plate Type Style (MIC) XR = Riser Rated
R = Ribbon in Mesh XP = Plenum Rated
06 = 6 Port (SC/FC/ST) XC = Central Tube Riser Rated
08 = 8 Port (SC/FC/ST) Note: 3 meter pigtail
12 = 12 Port (SC/LC/FC/ST) length is standard Outdoor
24 = 24 Port (LC) (Ribbon Only) ON = Non-Armored
7 Fiber Type OL = Armored Loose Tube
4 Adapter Plate Quantity AJ = Non-Armored Alternative Jacket
01 = 1 Plate 07 = 7 Plates S = SMF-28e+ FD = Flat Drop
02 = 2 Plates 08 = 8 Plates B = SMF Bend
03 = 3 Plates 09 = 9 Plates Insensitive
G.657.A1
10 Stub Length
06 = 6 Plates 12 = 12 Plates Multimode Leave Blank for No Stub
1 = 62.5/125μm OM1 Add -PE for a Pulling Eye
2 = 50/125μm OM2

Livermore, CA 94551 Fax (925) 447-7511
RDP Series Rackmount Enclosure

ARIA RDP Series rackmount enclosures are 14” deep
1RU panels with the capacity to accept three LGX adapter
plates.
RDP Series panels feature a unique sliding removable

drawer which permits working at a comfortable
level.
RDP enclosures support up to 36 fibers SC or

72 fibers LC (ribbon only).
Features
RDP panels are supplied fully loaded with adapter panels, pigtails, splice trays, and mounting brackets for both 19” and
23” racks. Recessed or flush mount brackets are also available.
The front door is made of Plexiglas® allowing the user to see inside and the sliding tray features radius guides to secure
cable slack and prevent kinks.
Enclosure dimensions are: 1.75” x 17.00” x 14.00” (HxWxD).
Front View
Panel shown with optional Cut Top Front Lid with Removable Plexiglas® accessory

Livermore, CA 94551 Fax (925) 447-7511

Accessories
Cut Top Front Lid with Removable Plexiglas®

P/N: K-PLEXI-LID-C-OK
Strain Relief Bracket Bottom Entry Strain Relief Bracket

P/N: ML-SRB-KIT P/N: BE-SRB-KIT
1RU Perforated L-Bracket Flush Mount Brackets

P/N: 1RU-TRAY-L-BRACKET P/N: 1RU-ML-FMB-EM-B

Livermore, CA 94551 Fax (925) 447-7511

Part Number
RD P - - - - - - - -
1 1 2 3 3 3 4 5 6 7 7 8 8 8 8

12 = 12 Port (SC/LC/FC/ST) D = Distribution Style (MIC) Indoor
24 = 24 Port (LC) (Ribbon Only) R = Ribbon in Mesh IR = Riser Rated
IP = Plenum Rated
Note: 3 meter pigtail IA = Interlocking Armor Plenum Rated
length is standard
2 Adapter Plate Indoor/Outdoor
Quantity XR = Riser Rated
XP = Plenum Rated
1 = 1 Plate 5 Fiber Type XC = Central Tube Riser Rated
2 = 2 Plates Singlemode
3 = 3 Plates Outdoor
S = SMF-28e+ ON = Non-Armored
B = SMF Bend OA = Armored Central Tube
Insensitive
OL = Armored Loose Tube
Singlemode Multimode OR = Ribbon Armored Central Tube
SCU = SC/UPC 1 = 62.5/125μm OM1 FD = Flat Drop
LCA = LC/APC 4 = 50/125μm OM4 8 Stub Length
FCU = FC/UPC
FCA = FC/APC Leave Blank for No Stub
6 Splice Trays
STU = ST/UPC Add -PE for a Pulling Eye
XXXF = XXX Feet
Multimode N = None
XXXM = XXX Meters
SCM = SC Y = Yes*
LCM = LC
FCM = FC *This enclosure
STM = ST comes standard with
ribbon fiber mass

Livermore, CA 94551 Fax (925) 447-7511
RDA Series Rackmount Enclosure

ARIA’s RDA Series Rackmount Enclosures
accommodate up to 36 fibers SC and 72
fibers LC (ribbon only) in a 1RU space -
1.75”x17.00”x14.00” (HxWxD).
Units are supplied fully loaded with adapter plates,

pigtails, splice trays, and rackmount brackets for
recessed mounting in both 19” and 23” racks.
100% tested for insertion loss, return loss, and

endface clarity.
These enclosures feature a unique removable

drawer to permit working at a comfortable level.
Features
Combination patch & splice design minimizes rack space required.
Preloaded configurations (pigtails and adapter panels) save on contractor labor and help meet project timelines.
100% factory tested product meets Telcordia GR326-CORE Issue 4 specifications.
Enclosure features an almond finish, magnetic latching front plexiglass door, and utilizes captive screws to hold the rear
lid in place.
Front View Interior View
Panel shown with the front and rear lid removed

Livermore, CA 94551 Fax (925) 447-7511
RDA Series Rackmount Enclosure

Accessories
Flush Mount Brackets Strain Relief Bracket Bottom Entry Strain Relief Extended Strain Relief
P/N: 1RU14D-FMBKIT P/N: STD-SRB-KIT Bracket (P/N: BE-SRB-KIT) Bracket (P/N: EX-SRB-KIT)
Part Number
RD A - - - - - - - -
1 1 2 3 3 3 4 5 6 7 7 8 8 8 8

12 = 12 Port (SC/LC/FC/ST) D = Distribution Style (MIC) Indoor
24 = 24 Port (LC) (Ribbon Only) R = Ribbon in Mesh IR = Riser Rated
IP = Plenum Rated
Note: 3 meter pigtail length is standard IA = Interlocking Armor Plenum Rated
2 Adapter Plate
Quantity Indoor/Outdoor
5 Fiber Type XR = Riser Rated
1 = 1 Plate XP = Plenum Rated
2 = 2 Plates Singlemode XC = Central Tube Riser Rated
3 = 3 Plates S = SMF-28e+
B = SMF Bend Insensitive Outdoor
G.657.A1 ON = Non-Armored
3 Adapter Type OA = Armored Central Tube
Multimode OL = Armored Loose Tube
Singlemode 1 = 62.5/125μm OM1 AJ = Non-Armored Alternative Jacket
SCU = SC/UPC 2 = 50/125μm OM2 OR = Ribbon Armored Central Tube
SCA = SC/APC 3 = 50/125μm OM3 FD = Flat Drop
LCA = LC/APC
FCU = FC/UPC
FCA = FC/APC 6 Splice Trays 8 Stub Length
STU = ST/UPC N = None Leave Blank for No Stub
Y = Yes* Add -PE for a Pulling Eye
Multimode
SCM = SC *This enclosure comes standard with XXXF = XXX Feet
LCM = LC 4”x8” splice trays in 24 fiber single XXXM = XXX Meters
FCM = FC fiber fusion or 6 position ribbon fiber
STM = ST mass fusion configurations.

Livermore, CA 94551 Fax (925) 447-7511
ARM Series Rackmount Enclosures
Overview
ARIA ARM Series Rackmount Enclosures are 14” deep panels that accept SMP type adapter plates and come in 2RU and
3RU configurations.
ARM panels feature a removable door, rear lid, and front lid. The door and front lid are both made of Plexiglas® and allow
the user to see inside the jumper area.
ARM panels are supplied fully loaded with adapter panels, pigtails, splice trays, and mounting brackets for both 19” and
23” racks.
Features
Grommets cover cable entry openings.
ARM panels include threaded posts and a hold down strap to secure the splice trays.
Enclosure chassis is made of powdercoated 15 gauge stainless steel.
The 2RU management area features radius guides to secure cable slack and prevent kinks.
The fiber pigtails are managed at the proper curvature to prevent attenuation.
Fiber Capacity
2RU Capacity: 72 fibers SC or 144 fibers LC (ribbon only) 3RU Capacity: 144 fibers SC or 288 fibers LC (ribbon only)

Livermore, CA 94551 Fax (925) 447-7511

Dimensions
2RU 3RU
Accessories
12A1 Cable Clamp for Metallic Sheath Cable and for 12A2 Cable Clamp for Dielectric Sheath Cable and for
0.400” to 0.999” Diameter Cable (P/N: 104-384-490-SRE-W) 0.400” to 0.999” Diameter Cable (P/N: 106-230-337-SRE-W)
12A3 Cable Clamp for 0.25”-1.25” Diameter Cable

P/N: 108-527-423

Livermore, CA 94551 Fax (925) 447-7511

Part Number
ARM- - - - - - - - -
1 2 2 3 3 4 4 4 5 6 7 8 8 9 9 9 9
1 Enclosure 5 Pigtail 8 Stub Cable Type

2 = 2RU N = No Pigtail Leave Blank for No Stub
3 = 3RU M = 900 μm in Mesh
D = Distribution Style (MIC) Indoor
R = Ribbon in Mesh IR = Riser Rated
IP = Plenum Rated
2 Adapter Plate Type Note: 3 meter pigtail IA = Interlocking Armor Plenum Rated
06 = 6 Port (SC/FC/ST) length is standard
Indoor/Outdoor
08 = 8 Port (SC) XR = Riser Rated
12 = 12 Port (SC/LC) XP = Plenum Rated
24 = 24 Port (LC) (Ribbon Only) 6 Fiber Type XC = Central Tube Riser Rated
Singlemode Outdoor
S = SMF-28e+
3 Adapter Plate Quantity B = SMF Bend
ON = Non-Armored
01 = 1 Plate 07 = 7 Plates Insensitive OL = Armored Loose Tube
02 = 2 Plates 08 = 8 Plates G.657.A1 AJ = Non-Armored Alternative Jacket
03 = 3 Plates 09 = 9 Plates Multimode OR = Ribbon Armored Central Tube
04 = 4 Plates 10 = 10 Plates 1 = 62.5/125μm OM1 FD = Flat Drop
05 = 5 Plates 11 = 11 Plates 2 = 50/125μm OM2
06 = 6 Plates 12 = 12 Plates 3 = 50/125μm OM3
4 = 50/125μm OM4 9 Stub Length
4 Adapter Type Leave Blank for No Stub
Singlemode 7 Splice Trays
SCU = SC/UPC XXXF = XXX Feet
N = None XXXM = XXX Meters
SCA = SC/APC Y = Yes*
LCU = LC/UPC
LCA = LC/APC *These enclosures come
FCU = FC/UPC standard with 5.5”x12.0”
FCA = FC/APC splice trays in 36 fiber
STU = ST/UPC single fiber fusion or 16
position ribbon fiber mass
Multimode fusion configurations.
SCM = SC
LCM = LC
FCM = FC
STM = ST

Livermore, CA 94551 Fax (925) 447-7511
Modular Rackmount Panel (MRP)

The Modular Rackmount Panel (MRP) is a 4RU
rackmount enclosure that works with CCH or LGX adapter
plates and is available in a variety of configurations
supporting up to 144 SC or 288 LC fiber terminations.
MRP Rackmount Enclosures can accommodate up to 12

CCH adapter panels and pigtail fanouts.
The available swing-out splice tray rack offers superior

access for quick, easy splicing, and the large, open
interior space provides excellent access for subsequent
installations as networks grow.
Features Specifications
• Modular panel supports a variety of configurations
Parameter Value
that match the user’s needs
Enclosure Material and 0.07” thick gray
• Optional swing-out splice tray rack supports highly Finish powdercoated steel
organized and easy-to-access splicing
Dimensions (H”xW”xD”) 7.0 x 17.0 x 15.5
• Large interior provides easy access to components Mounting 19” or 23” frames (brackets
• Clear plexiglass front door and steel rear door can be reversed to
accommodate either)
• Doors are secured with easy to use slide latches
Pre-Term or Patch-Only Configuration Swingout Splice Tray Rack Configuration
The pre-terminated or patch only configuration provides The optional swing-out splice tray rack maximizes space
management for cable breakout(s) and a fanout kit efficiency and accommodates a wide variety of splice tray
organizer. sizes.

Livermore, CA 94551 Fax (925) 447-7511

Internal Splice Platform Configuration
The optional internal splice platform provides a

more traditional splicing solution, with splice trays
stacked vertically for maximum accessibility.
Cable Entry and Strain Relief
Multiple strain relief bracket mounting locations support Removable cable entry plates support a variety of cable
top or bottom entry of multiple cables. quantities and diameters.
Accessories
12A1 Cable Clamp for Metallic Sheath 12A2 Cable Clamp for 12A3 Cable Clamp for
Cable and for Dielectric Sheath Cable and for 0.400” 0.25”-1.25” Diameter Cable
0.400” to 0.999” Diameter Cable to 0.999” Diameter Cable P/N: 108-527-423
P/N: 104-384-490-SRE-W P/N: 106-230-337-SRE-W
Strain Relief Bracket (P/N: STD-SRB-KIT) Extended Strain Relief Bracket (P/N: EX-SRB-KIT)

Livermore, CA 94551 Fax (925) 447-7511

Part Number
MR P- - - - - - - - -
1 1 1 2 2 3 3 4 4 4 5 6 7 8 8 9
1 Adapter Plate Format 4 Adapter Type 7 Splicing Option

CCH = CCH Singlemode N = No Splicing
LGX = LGX SCU = SC/UPC S = Swingout Splice Tray Rack*
LCU = LC/UPC I = Internal Splice Platform*
FCU = FC/UPC
2 Adapter Plate Type STU = ST/UPC *Splice configurations come standard
SCA = SC/APC with 5.5”x12.0” splice trays in 24 fiber
06 = 6 Port (SC/FC/ST) LCA = LC/APC single fiber fusion or 20 position ribbon
08 = 8 Port (SC/FC/ST) FCA = FC/APC fiber mass fusion configurations.
12 = 12 Port (SC/LC/FC/ST)
24 = 24 Port (LC) (Ribbon Only) Multimode
Note: 6 port CCH adapter

SCM = SC
LCM = LC
8 Stub Cable Type
plates are not available with FC FCM = FC Leave Blank for No Stub
or ST adapters and 8 port CCH STM = ST
type adapter plates are not Indoor
available. IR = Riser Rated
IP = Plenum Rated
5 Pigtail IA = Interlocking Armor Plenum Rated
3 Adapter Plate Quantity N = No Pigtail Indoor/Outdoor
M = 900 μm in Mesh XR = Riser Rated
01 = 1 Plate D = Distribution Style (MIC) XP = Plenum Rated
02 = 2 Plates R = Ribbon in Mesh XC = Central Tube Riser Rated
03 = 3 Plates
04 = 4 Plates Note: 3 meter pigtail Outdoor
05 = 5 Plates length is standard ON = Non-Armored
06 = 6 Plates OA = Armored Central Tube
07 = 7 Plates OL = Armored Loose Tube
08 = 8 Plates 6 Fiber Type AJ = Non-Armored Alternative Jacket
09 = 9 Plates OR = Ribbon Armored Central Tube
10 = 10 Plates Singlemode
FD = Flat Drop
11 = 11 Plates S = SMF-28e+
12 = 12 Plates B = SMF Bend
Insensitive
G.657.A1 9 Stub Length
Multimode Leave blank for No Stub
1 = 62.5/125μm OM1 Add -PE for a Pulling Eye
4 = 50/125μm OM4

Livermore, CA 94551 Fax (925) 447-7511
Swing-Out Series Rackmount Enclosures
ARIA Swing-Out Series Patch & Splice Rackmount Enclosures come in either a 1RU, 2 adapter plate capacity or a 2RU, 4
adapter plate capacity configuration.
The swing-out tray allows easy access to terminations and splicing.
Two universal 19” or 23” mounting brackets are included.
Enclosure can be terminated with adapters, pigtails, or a pre-terminated stub cable.
Specifications
Parameter Swing Out 2X 1RU Swing Out 4X 2RU
Dimensions (H”xW”xD”) 1.75 x 17.00 x 11.10 3.50 x 17.00 x 11.10
Material Powdercoated .06” thick aluminum Powdercoated .06” thick aluminum
Fiber Capacity 24 fibers SC or 48 fibers LC (ribbon only) 48 fibers SC or 96 fibers LC (ribbon only)
Strain Relief Bracket Support

Livermore, CA 94551 Fax (925) 447-7511

Interior View
1RU with Lid Removed and Tray Open 2RU with Lid Removed and Tray Open
Accessories
Swing Out Strain Relief Bracket Kit for Bottom Entry Strain Relief Bracket for Swing Out Strain Relief Bracket Kit for
1RU (P/N: SWRM-CLMP) 1RU (P/N: BE-SRB-KIT) 2RU (P/N: SRB-2RUSO)

Livermore, CA 94551 Fax (925) 447-7511

Part Number
SO- - - - - - - - -
1 2 2 3 4 4 4 5 6 7 8 8 9 9 9 9
1 Enclosure 5 Pigtail 8 Stub Cable Type

1 = 1RU, 2 Adapter N = No Pigtail Leave Blank for No Stub
Plate Capacity M = 900 μm in Mesh
2 = 2RU, 4 Adapter Indoor
D = Distribution
Plate Capacity IR = Riser Rated
Style (MIC)
IP = Plenum Rated
R = Ribbon in Mesh
2 Adapter Plate Type Note: 3 meter pigtail
Indoor/Outdoor
length is standard
06 = 6 Port (SC/FC/ST) XR = Riser Rated
08 = 8 Port (SC/FC/ST) XP = Plenum Rated
12 = 12 Port XC = Central Tube Riser Rated
(SC/LC/FC/ST) 6 Fiber Type
Outdoor
24 = 24 Port (LC) Singlemode ON = Non-Armored
(Ribbon Only) S = SMF-28e+ OA = Armored Central Tube
B = SMF Bend OL = Armored Loose Tube
Insensitive
3 Adapter Plate G.657.A1
Quantity OR = Ribbon Armored Central Tube
Multimode FD = Flat Drop
1 = 1 Plate 1 = 62.5/125μm OM1
2 = 2 Plates 2 = 50/125μm OM2
3 = 3 Plates 3 = 50/125μm OM3 9 Stub Length
4 = 4 Plates 4 = 50/125μm OM4
4 Adapter Type
7 Splice Trays XXXF = XXX Feet
Singlemode XXXM = XXX Meters
SCU = SC/UPC N = None
SCA = SC/APC Y = Yes*
LCU = LC/UPC
*This enclosure
LCA = LC/APC
comes standard with
FCU = FC/UPC
FCA = FC/APC
STU = ST/UPC
ribbon fiber mass
Multimode
SCM = SC
LCM = LC
FCM = FC
STM = ST

Livermore, CA 94551 Fax (925) 447-7511
HD Mini Cassette System

ARIA’s High Density (HD) MTP/MPO Mini Cassette System
is driven by the concept of network space optimization, it is
an MTP/MPO based system for fast deployments to meet
the evolution paths of 40G and 100G fiber optic links.
ARIA’s High Density (HD) MTP/MPO Mini Cassette System

offers simple installation, modular upgradeability, easy
accessibility, and a reliable fiber management solution.
1RU and 2RU size rackmount enclosures are available and

are mountable in a standard 19” telecom rack.
The 1RU size enclosure supports 12 Mini Cassette slots

or 144 fibers and the 2RU size enclosure supports 24 Mini
Cassette slots or 288 fibers.
Each slot in the enclosure is used to accommodate a Mini

Cassette module.
Features
• Ultra high fiber density, compact modular design, and easy installation
• Up to 12 slots supporting 144 fibers in 1RU of rack space or up to 24 slots supporting 288 fibers in 2RU of rack space
• Customizable module polarity and modular system management using Mini Cassettes provides easy reconfiguration
for moves, adds, and changes
• Easy fiber management migration from 10G to 40/100G for Telecommunications and Broadband/CATV Networks
LAN/WAN Premises
Applications
• Data Center Infrastructure
• Ultra High Density Fiber Management
• Telecommunications networks and Broadband / CATV networks
• LAN/WAN Premises
Specifications
Parameter Value
Singlemode Standard / Elite Ferrule Loss (dB) <0.7 / <0.6
Multimode Standard / Elite Ferrule Loss (dB) <0.35 / <0.35
1RU Enclosure Dimensions 1.75”x17.00”x10.50” (HxWxD)
2RU Enclosure Dimensions 3.50”x17.00”x10.50” (HxWxD)
Mini Cassette Module Dimensions 0.50”x4.00”x4.75” (HxWxD)

Livermore, CA 94551 Fax (925) 447-7511

Loaded 1RU Enclosure
Front View
Rear View
Loaded 2RU Enclosure
Front View
Rear View

Livermore, CA 94551 Fax (925) 447-7511

Mini Cassette Modules
Singlemode 12 Fiber LC/UPC to MPO/MTP Mini Cassette Singlemode 12 Fiber LC/APC to MPO/MTP Mini Cassette
Multimode OM3 12 Fiber LC to MPO/MTP Mini Cassette Multimode OM4 12 Fiber LC to MPO/MTP Mini Cassette
Three 8 Fiber MPO/MTP to One 24 Fiber MPO/MTP Mini Cassette Six 8 Fiber MPO/MTP to Two 24 Fiber MPO/MTP Mini Cassette

Livermore, CA 94551 Fax (925) 447-7511

Three 8 Fiber MPO/MTP to One 24 Fiber MPO/MTP Mini Cassette Details
0.50" 4.75"
01 8 Fiber
MTP/MPO
12 Adapter A
01 8 Fiber
4.00" MTP/MPO
12 Adapter B
24
24 Fiber
01 8 Fiber MTP/MPO
MTP/MPO Adapter
12 Adapter C 01
Key Up
Key Up
Left Front Right
24 Fiber Adapter Fiber Details

Fiber 8 Fiber Fiber 8 Fiber
Adapter Adapter
1 A12 13 A1
2 A11 14 A2
3 A10 15 A3
4 A9 16 A4
5 B12 17 B1
6 B11 18 B2
7 B10 19 B3
8 B9 20 B4
9 C12 21 C1
10 C11 22 C2
11 C10 23 C3
12 C9 24 C4

Livermore, CA 94551 Fax (925) 447-7511

Six 8 Fiber MPO/MTP to Two 24 Fiber MPO/MTP Mini Cassette Details
0.50" 4.75"
01 8 Fiber
MTP/MPO
Adapter A
12
01 8 Fiber
MTP/MPO
12 Adapter B
01 8 Fiber
MTP/MPO
12 Adapter C
4.00" 01 8 Fiber
MTP/MPO 24 Fiber 24
12 Adapter D MTP/MPO
01 8 Fiber Adapter A 01
MTP/MPO 24
24 Fiber
12 Adapter E
MTP/MPO
01 8 Fiber Adapter B 01
MTP/MPO
12 Adapter F
Key Up
Key Up
Left Front Right
24 Fiber Adapter A Fiber Details 24 Fiber Adapter B Fiber Details

Fiber 8 Fiber Fiber 8 Fiber Fiber 8 Fiber Fiber 8 Fiber
Adapter Adapter Adapter Adapter
1 A12 13 A1 1 D12 13 D1
2 A11 14 A2 2 D11 14 D2
3 A10 15 A3 3 D10 15 D3
4 A9 16 A4 4 D9 16 D4
5 B12 17 B1 5 E12 17 E1
6 B11 18 B2 6 E11 18 E2
7 B10 19 B3 7 E10 19 E3
8 B9 20 B4 8 E9 20 E4
9 C12 21 C1 9 F12 21 F1
10 C11 22 C2 10 F11 22 F2
11 C10 23 C3 11 F10 23 F3
12 C9 24 C4 12 F9 24 F4

Livermore, CA 94551 Fax (925) 447-7511

Enclosure Part Number
1RU Chassis to Accept 12 High Density MPO/MTP Mini Cassettes

P/N: HDMCS-1RU
2RU Chassis to Accept 24 High Density MPO/MTP Mini Cassettes

P/N: HDMCS-2RU
HD Mini Cassette Part Number

HDMCS- - - -
1 1 2 2 2 3 4 4 4
1 Mini Cassette Type 3 Ferrule Type

LC = 12 Fiber LC to MPO/MTP S = Standard
3M = Three 8 Fiber MPO/MTP to One 24 Fiber MPO/MTP E = Elite
6M = Six 8 Fiber MPO/MTP to Two 24 Fiber MPO/MTP
4 LC Singlemode Adapter Type

2 Fiber Type
Leave Blank for Mini Cassette Module
SMF = Singlemode 8.3/125μm Fiber with No Singlemode LC Adapters
OM3 = Multimode 50/125μm OM3 Fiber
OM4 = Multimode 50/125μm OM4 Fiber UPC = Singlemode LC/UPC Adapter
APC = Singlemode LC/APC Adapter

Livermore, CA 94551 Fax (925) 447-7511
High Density MPO (HDM) Series Rackmount Enclosures
ARIA’s High Density MPO (HDM) Series rackmount panels support high fiber counts and use minimal rack space.
Dense Connectivity: 1RU HDM Series enclosures support up to 432 fibers and 2RU HDM Series enclosures support up to
864 fibers.
HDM Series panels are loaded with MPO adapters and support either patching or patching and splicing.
Panels include mounting brackets for 19” and 23” rack systems.
A front door with spring loaded slide latches and removable plexiglass lid provide the user with great jumper visibility,
quick access, and spacious maneuverability.
Specifications
Parameter 1RU 2RU
Dimensions (H”xW”xD”) 1.75” x 17.00” x 14.00” 3.50” x 17.00” x 14.00”
Material Powdercoated .09” thick aluminum Powdercoated .09” thick aluminum
Fiber Capacity 432 Fibers 864 Fibers
Weight (Unloaded) 4.0lbs / 1.8kgs 5.0lbs / 2.2kgs
LGX Adapter Plate Capacity 3 6
Patching Capability
ARIA’s HDM Series rackmount enclosures can be loaded with plug and play type LGX cassettes to support patching
between SC or LC connectors and MPO connectors.

Livermore, CA 94551 Fax (925) 447-7511
High Density MPO (HDM) Series Rackmount Enclosures

Splicing Capability
ARIA HDM Series rackmount enclosures can also be provided with an attached splice shelf.
The splice shelf features a sliding rail system which guides each 216 fiber mass fusion splice tray in and out independently.
Part Number
HDM- - - - - -
1 2 3 3 4 5 6
1 Patch Panel Option 4 Adapter Plate Quantity 6 Fiber Type

1 = 1RU 1 = 1 Plate Singlemode
2 = 2RU 2 = 2 Plates S = SMF-28e+
3 = 3 Plates B = SMF Bend
4 = 4 Plates Insensitive
2 Splice Panel Option 5 = 5 Plates G.657.A1
6 = 6 Plates
S = Splice Panel Attached Multimode
P = Patch Only 1 = 62.5/125μm OM1
2 = 50/125μm OM2
5 Splice Tray Quantity 3 = 50/125μm OM3
3 Adapter Plate Type Leave blank for patch only 4 = 50/125μm OM4
06 = 6 MPOs 1 = 1 Tray 4 = 4 Trays

08 = 8 MPOs 2 = 2 Trays 5 = 5 Trays
12 = 12 MPOs 3 = 3 Trays 6 = 6 Trays

Livermore, CA 94551 Fax (925) 447-7511
Fiber Optic Cable Assemblies DS-BS-1 04/12/2018
Fiber Optic Cable Assemblies
ARIA Fiber Optic Cable Assemblies are available with your choice of fiber count, features, flame rating, connector type,
polish type, fiber type, and cable type.
All assemblies are 100% tested and certified to Telcordia GR-326-CORE Issue 4 specifications.
Connector Performance
Polish Type Insertion Loss max/ Return Loss max/ Durability change in dB
typical (dB) typical (-dB) (1000 matings)
UPC 0.3/0.15 55/57 0.2
APC 0.3/0.15 65/66 0.2
Polish Type Tensile Strength Temperature Cycling Materials

50 lbs (220N) -20 to +80°C (40 cycles) ferrule/housing
UPC 0.2 db 0.2 db ceramic/metal
APC 0.2 db 0.2 db ceramic/metal
Cable Performance
Fiber Type Wavelengths Maximum LED Modal Serial Serial 10
(nm) Attenuation Bandwidth Bandwidth Gigabit Gigabit
db/km MHz/km MHz/km Ethernet Ethernet
Distance (m) Distance (m)
9/125μm SMF 1310/1550 0.35/0.25 N/A N/A 5000 1000/4000
62.5/125μm OM1 850/1310 3.5/1.0 200/500 220 300/550 33
50/125μm OM2 850/1310 3.5/1.5 500/500 510 600/600 82
50/125μm OM3 850/1310 3.0/1.5 1500/500 2000 1000/600 300
50/125μm OM4 850/1310 3.0/1.0 3500/500 4700 N/A 550

Livermore, CA 94551 Fax (925) 447-7511
Bend-Insensitive Cable Assemblies

ARIA Technologies now offers a complete line of pigtails,
patchcords, fan-outs, and trunk cables with bend-insensitive
fibers.
Cable bends can create high loss in congested areas.
ARIA Bend-Insensitive cable assemblies are ITU-T G.657.A1

compliant and ensure low loss even with a small 10mm bend
radius in the fiber cable.
Features Applications
• <0.25dB bend induced loss in the 1530-1565 nm & • FTTH Networks in indoor or outdoor compact
1565-1625 nm wavelength spans, i.e., the C-band and enclosures
the L-band
• High density patch panels where patchcord
• Low insertion loss: 0.30dB max and <0.15dB typical congestion may exist
• Low return loss: <-55dB for UPC and <-65dB for APC • In central offices, point-of-presence locations (POPs),
or Nodes
• Easy to remove buffer coating
• High performance networks operating in the C-band
• Fully compatible with all standard singlemode fiber
and L-band spectrums
systems
• Data Centers with multiple cable runs
• Meets or exceeds all industry standards for
singlemode fiber performance • DWDM networks
• Digital video networks
• Ideal for networks operating in the 1530-1625 nm
wavelengths
Bend Induced Loss with Bend Induced Loss with

Respect to Bend Radius Respect to Wavelength
2 2
1.8 1.8
1.6 1.6
1.4 Standard 1.4
1.2 Fiber 1.2
Bend
1 1
Induced Bend
0.8 0.8
Loss (dB) 0.6 Insensitive
0.6
Fiber
0.4 0.4
0.2 0.2
0 0
10 12.5 15 17.5 1520 1540 1560 1580 1600 1620 1640
Bend Radius (mm) Wavelength (nm)

Livermore, CA 94551 Fax (925) 447-7511
Jumpers (Patch Cords)

ARIA Technologies offers a complete line of simplex
and duplex jumpers in singlemode and multimode
configurations with Corning and Prysmian/Draka
fiber that is manufactured to Telcordia GR326-
CORE Issue 4 specifications.
ARIA jumpers meet or exceed all industry standards

for singlemode and multimode fiber performance.
High Density Connectors Available Endface Clarity, Insertion and Return Loss Testing
• SC and LC uniboot connectors reduce fiber Endface Clarity is the cleanliness and
congestion smoothness of the connector endface
• LC connectors with pull tabs ease connector
Insertion Loss refers to the amount of
insertion and removal
optical power lost through a jumper
• LC uniboot polarity switchable connectors
reduce fiber congestion and provide polarity Return Loss refers to the optical power
flexibility reflected at the connector toward the source
Endface Geometry Testing

Top of Polish Highest point of
Fiber Recess Apex Offset
Polished Endface
Top of Fiber
Radius of
Curvature Center of Ferrule
Fiber Center of
Ferrule Ferrule
Center of Fiber
Fiber
Radius of curvature is the roundness Fiber height is the height or depth Apex offset is the distance between
of the ferrule’s endface that the fiber core protrudes or the highest point of the polished
undercuts the ferrule endface ferrule’s endface and the fiber’s axis
Testing Requirements
Parameter Value
Endface Clarity No scratches, pits, dirt, or oil at 400x magnification
Insertion Loss (dB) 0.30 Maximum, <0.15 Typical
Return Loss (dB) <-55 (UPC Connectors), <-65 (APC) PASS
Radius of Curvature (mm) 7 to 25 (UPC and MM Connectors), 5 to 12 (APC)
Fiber Height (nm) ±50 (UPC and MM Connectors), ±100 (APC)
Apex Offset (µm) <50

Livermore, CA 94551 Fax (925) 447-7511

Connector Examples
SC/UPC Duplex LC/UPC Duplex with LC Duplex Multimode LC/UPC Simplex with ST Duplex Multimode
19mm Boot OM3 50° angled boot OM2
SC/UPC Duplex Uniboot LC/UPC Simplex with Uniboot LC Polarity LC/UPC Uniboot with Uniboot LC Polarity
Flat Pull Tab Switchable with Pull Tab Round Pull Tab Switchable
Switching the Polarity on the Uniboot LC Polarity Switchable Connector
Locate the areas shown above Insert a small flathead screwdriver into Remove the connector lid, switch the
the locations shown connectors, and replace the lid
Switching the Polarity on the Uniboot LC Polarity Switchable Connector with Pull Tab
Unlock Housing Remove Housing Rotate Clips 180 Degrees
Rotate Housing 180 Degrees Install Housing Lock housing

Livermore, CA 94551 Fax (925) 447-7511

Part Number
JM P- - - - - - - - -
1 1 2 2 3 4 5 5 6 6 6 7 7 7 8 8 9 9
1 Cable Size 5 Jacket Color 7 Connector Type End 2

16 = 1.6 mm Leave Blank for Standard Color See Options in
20 = 2.0 mm Connector Type End 1
BL = Blue
Note: 900μm and GR = Green *Add the following characters for
1.2mm are available RD = Red these LC connector options:
upon request WT = White S = 19mm boot (29mm is standard)
VL = Erika Violet A = 50° Boot
2 = 20mm Long Round Pull Tab
Note: Standard colors are as follows:
2 Cable Construction Singlemode: Yellow
4 = 40mm Long Round Pull Tab
F = Flat pull tab
SX = Simplex OM1 & OM2: Orange T = Uniboot Polarity Switchable
DX = Duplex OM3 & OM4: Aqua with Pull Tab (Duplex Only)
P = Uniboot Polarity Switchable
(Duplex Only)
3 Jacket Rating 6 Connector Type End 1
Singlemode
8 Duplex Clips
R = Riser (OFNR)
P = Plenum (OFNP) SCU = SC/UPC
L = Low Smoke Zero USC = SC/UPC Uniboot Leave Blank for Jumpers with
Halogen (LSZH) (Duplex Only) Simplex Cable Construction,
D = Dual Rated SCA = SC/APC Uniboot Connectors, FC or ST
(OFNR & LSZH) LCU = LC/UPC* Connectors, and for Duplex
LCA = LC/APC* Cable Construction using SC
FCU = FC/UPC or LC Connectors with Clips
4 Fiber Type FCA = FC/APC
STU = ST/UPC NC = No Duplex Clips
Singlemode
Multimode
S = SMF-28e+
SCM = SC
B = SMF Bend Insensitive
LCM = LC* 9 Length
G.657.A1
FCM = FC XXXF = Length in Feet
Multimode STM = ST XXXM = Length in Meters
1 = 62.5/125μm OM1
000 = No Connector
2 = 50/125μm OM2
3 = 50/125μm OM3
4 = 50/125μm OM4

Livermore, CA 94551 Fax (925) 447-7511
Outdoor Ruggedized Jumpers
ARIA Outdoor Ruggedized Jumpers remain flexible even in extreme conditions unlike indoor cordage that stiffens and
retains its shape in cold weather.
Outdoor Ruggedized Jumpers offer an economical solution for deploying fiber in any OSP optical network
These assemblies help eliminate bend-radius issues inside a NID. These patch cords also work well in outside plant
cross-connect cabinets and when splicing FTTH drops in a NID or ONT.
Features
• Manufactured and tested according to Telcordia GR326-CORE Issue 4 specifications
• Low insertion loss: 0.3dB max and <0.15dB typical, exceeding industry standards
• Compact 2.0mm or 3.0mm jacket that minimizes cable congestion or ruggedized OSP rated 4.4mm or 5.3mm black
jacketed cable available
• Robust transition design provides a durable and waterproof change from the cable jacket to duplex connectors
• Patch cords remain flexible and durable in extreme temperatures
• UV resistant jacket prevents oxidation
• Environmentally stable, low-insertion loss, and minimal back reflection

Livermore, CA 94551 Fax (925) 447-7511

Rugged Transitions for Standard Duplex Connectors
Duplex LC
Duplex SC
Pull Tab LC Connector with Various Cable O.D. Options
2.0mm Pull Tab LC
3.0mm Pull Tab LC
4.4mm Pull Tab LC
Uniboot LC Connector with 3.0mm Cable

Livermore, CA 94551 Fax (925) 447-7511

Specifications
Parameter Value
Cable O.D. 2.0mm, 3.0mm, 4.4mm or 5.3mm
Fiber Singlemode 9/125µm Corning Fiber
Jacket Rating OFNR or OFNP
Jacket Type Indoor/Outdoor Black PVC
Long Term / Short Term Max Tensile Strength (N) 160 / 320
Long Term / Short Term Crushing Resistance (N/100mm) 100 / 500
Dynamic / Static Bending Radius (mm) 20 x Cable O.D. / 10 x Cable O.D.
Attenuation 1310nm ≤0.30 dB/km
Attenuation 1550nm ≤0.20 dB/km
Storage & Operating Temperature (°C) -10~+70
Part Number
OR J - - - - -
1 1 2 3 3 3 4 4 4 5 5 5 5
1 Cable O.D. 2 Jacket Rating 3 Connector Type End 1 4 Connector Type End 2
20 = 2.0mm R = OFNR SCU = SC/UPC SCU = SC/UPC
30 = 3.0mm P = OFNP SCA = SC/APC SCA = SC/APC
44 = 4.4mm LCU = LC/UPC LCU = LC/UPC
53 = 5.3mm LCA = LC/APC LCA = LC/APC
ULU = Uniboot LC/UPC ULU = Uniboot LC/UPC
PLU = Pull Tab LC/UPC PLU = Pull Tab LC/UPC
SLU = Short Pull Tab SLU = Short Pull Tab
LC/UPC LC/UPC
5 Length
XXXF = Length
in Feet
XXXM = Length
in Meters

Livermore, CA 94551 Fax (925) 447-7511
MPO Trunk Cable Assemblies

MPO Trunk Cables provide a physical conduit, pipeline, or
circuit for a trunk connection in a fiber optic network.
Factory terminated cables provide a quick-to-deploy, scalable

solution that improves reliability and reduces installation time
and cost, using high density MPO connectors.
Trunk cables are capable of supporting multiple users or

devices from one point to another while distributing multiple
data channels.
They are a convenient and economical alternative to running

multiple “jumpers” or patch cables.
Trunk cable assemblies optimize cable routing requirements

to ensure efficient use of pathway space.
Features
• Rapid Deployment - application specific designs tailor configuration and breakout construction to application
requirements to minimize waste, optimize cable management, speed up deployment, and improve flexibility and
manageability for lower installation costs.
• Round, easy to spool cable and breakout legs.
• 100% Tested - assures verified optical performance for improved network integrity.
• High-Density Cable - uses pathway space more efficiently to improve manageability and reduce installation costs.
• Optimized Performance - assemblies are constructed with low loss MPO/MTP proprietary MT polishing. Providing low
insertion and return loss and minimizing variability for improved channel link loss performance.
Applications
• High density architectures
• Storage area networking fiber channel
• Parallel optics
• Infiniband
Compliance
• Jacketed cable is compliant with the NFPA 262 Optical Fiber Nonconductive Plenum (OFNP) and
IEC-60332 Low Smoke Zero Halogen (LSZH) flame rating.
• Compliant to Directive 2002/95/EC (RoHS) and REACH SvHC.
• MPO connector complies with IEC-61754-7 and EIA/TIA-604-5.

Livermore, CA 94551 Fax (925) 447-7511

Specifications
Parameter Value
Connector Type 8-Fiber, 12-Fiber, or 24-Fiber MPO/MTP
Polish MPO: PC (Multimode); APC (Singlemode)
Housing Color Singlemode (Yellow or Green), Multimode OM3 (Aqua),
Multimode OM4 (Aqua or Violet)
Multimode Elite 0.35
Multimode Standard 0.60
Insertion Loss (Max) (dB)
Singlemode Elite 0.35
Singlemode Standard 0.75
Singlemode Elite ≥60 (8° Angle Polish)
Return Loss (dB)
Singlemode Standard ≥60 (8° Angle Polish)
Durability (500 Matings) (dB) < 0.2
Fiber Type Singlemode OS2, Multimode OM3, Multimode OM4
Outer diameter (mm) 3.0mm up to 24 fiber (larger jacket sizes available)
Cable Construction Round Jacketed Micro-Distribution
Outer jacket Color Singlemode OS2 (Yellow), Multimode OM3 (Aqua),
Multimode OM4 (Violet)
Outer jacket material Low Smoke Zero Halogen (LSZH), Riser Rated (OFNR),
Plenum Rated (OFNP)
Tensile strength (N) 500
Operating / Storage Temperature (°C) -20 to +60 / -40 to +70

Livermore, CA 94551 Fax (925) 447-7511

Example Singlemode Configurations
End 1: One 12 Fiber MPO End 1: Two 12 Fiber MPO End 1: Four 12 Fiber MPO End 1: One 12 Fiber MPO
End 2: One 12 Fiber MPO End 2: Two 12 Fiber MPO End 2: Four 12 Fiber MPO End 2: Six 2 Fiber LC
Example OM3 Configurations
Example OM4 Configurations*
*Aqua jacket color is standard. Erika Violet available upon request.

Livermore, CA 94551 Fax (925) 447-7511

Part Number
MC R - - - - - - - - - -
1 1 2 2 3 4 4 5 5 5 6 7 8 9 10
1 MPO Fiber Count 5 Connector Type End 2 8 Length

08 = 8 Fiber MPO Connector MSF = MPO Male Standard Ferrule XXXF = Length in Feet
12 = 12 Fiber MPO Connector MEF = MPO Male Elite Ferrule XXXM = Length in Meters
24 = 24 Fiber MPO Connector FSF = MPO Female Standard Ferrule
FEF = MPO Female Elite Ferrule
LAS = LC/APC Simplex
9 Breakout Length
2 MPO Quantity LUS = LCUPC Simplex
LAD = LC/APC Duplex 08 = 8 Inch
XX = Number of MPO Connectors LUD = LC/UPC Duplex 12 = 12 Inch
SAS = SC/APC Simplex 18 = 18 Inch
SUS = SCUPC Simplex 24 = 24 Inch
3 Fiber Type SAD = SC/APC Duplex
SUD = SC/UPC Duplex
Singlemode 10 Pulling Eye End 2
6 MPO Wiring Method
S = SMF-28e+ 00 = No Pulling Eye
B = SMF Bend PE = Pulling Eye
Insensitive A = Method A
G.657.A1 B = Method B
C = Method C
Multimode
3 = Multimode OM3
4 = Multimode OM4
7 Jacket Rating
L = Low Smoke
4 Connector Type End 1 Zero Halogen
R = Riser Rated
MS = MPO Male Standard Ferrule
P = Plenum Rated
ME = MPO Male Elite Ferrule
FS = MPO Female Standard Ferrule
FE = MPO Female Elite Ferrule

Livermore, CA 94551 Fax (925) 447-7511
Optical Amplifier Drop Cable Assemblies

ARIA Optical Amplifier Drop Cable Assemblies provide
connectivity to an Optical Network Unit (ONU).
They feature a rugged design and eliminate the need

for additional splice points and hardware at the amplifier
location.
This unique product provides the end-user with the ability to

configure the system with pre-terminated cables dropped at
the node location and splice enclosure.
Cable lengths up to 1,000 feet can be supplied to eliminate

additional splice points, hardware, and labor time at the node
location.
To guarantee the flexibility necessary inside the amplifier or

node housing, different fanout support tube lengths and a
variety of fiber optic connector types are available.
Overview
The furcation unit terminates the cable with 2.0mm fan-out tubes for each 250μm fiber.
The entry connector encloses the outside plant cable with a waterproof connection that secures the armored jacket if
present and provides a stable strong connection to the amplifier housing using the industry standard thread size.
The connectors and fibers can be fed into the amplifier housing from the outside.
In order to prevent water penetration with any entry connector, use Raychem or Canusa epoxy lined heatshrink with
moisture block. This will also resist potential destructive forces on the cable. 8 inches of Canusa epoxy lined heat
shrink, connector cleaning instructions, and installation instructions are included with each Optical Amplifier Drop Cable
Assembly.
Features
• Available in cable lengths up to 1,000 feet
• Standard lengths are 25, 50, 75, 100, and 150 feet
• Provides protection against inside and outside water penetration when coupled with heatshrink
• Eliminates pistoning of the cable core. The Opto-Entry fitting provides a pull strength of 450 lbs
• Rugged design
• Provides time savings and easy installation
• Guarantees maximum clearance inside the amplifier housing
• Average UPC Return Loss: -58dB
• Average APC Return Loss: -68dB

Livermore, CA 94551 Fax (925) 447-7511
Optical Amplifier Drop Cable Assemblies

Part Number
O AD - - - - - -
1 1 1 2 2 3 3 4 4 4 5 6 6 6 6
1 Connector Type 3 Number of 5 Fitting Type

Connectors
FCU = FC/UPC O = Opto-Entry (5/8”-24)
SCU = SC/UPC 02 = 2 Connectors 9 = Opto-Entry (5/8”-24)
LCU = LC/UPC 03 = 3 Connectors with 90 Degree Fitting
FCA = FC/APC 04 = 4 Connectors S = Opto-Entry Stainless
SCA = SC/APC 05 = 5 Connectors Z = Opto-Short Stainless
LCA = LC/APC 06 = 6 Connectors 2.5 inches
E2A = E2000 APC 07 = 7 Connectors
08 = 8 Connectors
09 = 9 Connectors 6 Overall Cable Length
2 Breakout Length 10 = 10 Connectors
XXXF = XXX Feet
11 = 11 Connectors
XX = Length in Inches XXXM = XXX Meters
12 = 12 Connectors
Example: Example: 025F = 25 feet
4 Cable Type
28 = 28 inches
OPA = Outside Plant Armored

(PE Jacket)
OPN = Outside Plant Non-Armored
(PE Jacket)
IOP = Indoor/Outdoor (PU Jacket)
Contact sales department for
more cable options

Livermore, CA 94551 Fax (925) 447-7511
Interfacility Cable (IFC) Assemblies

ARIA Interfacility Cable (IFC) assemblies are multi-fiber
cables that are pre-terminated and used within a building for
cross-connecting or interconnecting fibers.
IFC assemblies are available in stranded and ribbon cable

types with 12 to 288 fibers.
ARIA IFC assemblies meet UL-1666 OFNR Riser or OFNP

Plenum ratings.
They have an all dielectric construction that is designed to

meet the fire resistant characteristics required in the central
office.
The stranded cable type bundles individual 900 μm fibers

into subunits of 6-12 fibers. The ribbon cable type consists of
12 fiber ribbons identified as a subunit. Stranded and ribbon
cable types identify each subunit and the individual fibers
within the subunits are color-coded.
Interfacility Cable (IFC) Assembly Example

Singlemode SC/UPC connectors,
900um-type, 48 each end
Color coded 900um fiber - both ends
48-fiber singlemode distribution

style cable, OFNR rated, SMF-28e
fiber, Corning Cable Systems cable
Numbered subunit
jackets, approx. 4 in.
36 in. breakout 36 in. breakout
40 meters

Livermore, CA 94551 Fax (925) 447-7511
Interfacility Cable (IFC) Assemblies

Part Number
I FC- - - - - - - - -
1 2 2 2 3 4 4 4 5 5 5 6 6 7 7 8 8 9
1 Flame Rating 4 Connector Type End 1 6 Breakout Length

R = OFNR Singlemode 24 = 24 inch breakout
P = OFNP SCU = SC/UPC 36 = 36 inch breakout
SCA = SC/APC XX = Custom breakout
LCU = LC/UPC
LCA = LC/APC
FCU = FC/UPC
FCA = FC/APC
STU = ST/UPC
2 Fiber Count Multimode 7 Breakout Outer Diameter

SCM = SC
012 = 12 Fibers 09 = 900μm
LCM = LC
024 = 24 Fibers 20 = 2.0mm tubing
FCM = FC
048 = 48 Fibers 30 = 3.0mm tubing
STM = ST
072 = 72 Fibers
096 = 96 Fibers
000 = Pigtails
144 = 144 Fibers
(No Connector)
288 = 288 Fibers
Additional connector styles
available upon request
8 Pulling Eye
00 = No Pulling Eye
3 Fiber Type 5 Connector Type End 2 PE = Pulling Eye
Singlemode Singlemode
S = SMF-28e+ SCU = SC/UPC
B = SMF Bend SCA = SC/APC
Insensitive LCU = LC/UPC
G.657.A1 LCA = LC/APC
Multimode
FCU = FC/UPC 9 Length
FCA = FC/APC
1 = 62.5/125μm OM1 STU = ST/UPC XXXU = (Length, Unit)
2 = 50/125μm OM2
3 = 50/125μm OM3 Multimode Example:
4 = 50/125μm OM4 SCM = SC 100F = 100 Feet
LCM = LC 020M = 20 Meters
FCM = FC
STM = ST

Livermore, CA 94551 Fax (925) 447-7511
ODVA IP67 Rated Cable Assemblies

ARIA ODVA IP67 Rated Cable Assemblies are available
with SC, LC or MPO connector types.
All assemblies come with an SC ODVA, LC ODVA, or

MPO ODVA connector on one end and an SC, LC, MPO,
SC ODVA, LC ODVA, or MPO ODVA on the other end.
Cable assemblies can be easily installed onto a panel by

using an adapter.
• Meets IP67 Standards • Outdoor events requiring sound or video
• No tools required • Industrial machinery
• Bayonet style locking mechanism • Diagnostic equipment
• Designed for harsh environment applications • Communication equipment
• All fiber types and cable types are available • Anywhere rugged weatherproof connectivity is required
Enclosure Compatibility
ODVA IP67 Rated Cable Assemblies are compatible with ARIA’s NEMA 4 Rated 4X Wallmount Enclosure, NEMA 4 Rated
8X Wallmount Enclosure, and NEMA 4 Rated Outdoor Enclosure (ODE).
These cable assemblies can be used with any enclosure up to 0.158” (4mm) thick with a 1.08”-1.25” sized hole.

Livermore, CA 94551 Fax (925) 447-7511

Patchcords (See Part Number on Next Page)
ODVA Duplex LC/ ODVA Duplex LC/ ODVA SC/UPC to ODVA SC/APC to ODVA MPO to MPO
UPC to Duplex LC/ APC to Duplex LC/ SC/UPC Patchcord SC/APC Patchcord Patchcord
UPC Patchcord APC Patchcord
Adapters
ODVA LC/UPC to ODVA LC/APC to ODVA SC/UPC to ODVA SC/APC to ODVA MPO to
LC/UPC Adapter LC/APC Adapter SC/UPC Adapter SC/APC Adapter MPO Adapter
P/N: ODVA-A-LCU P/N: ODVA-A-LCA P/N: ODVA-A-SCU P/N: ODVA-A-SCA P/N: ODVA-A-MPO
In-Line Bulkheads
ODVA LC/UPC to ODVA LC/APC to ODVA SC/UPC to ODVA SC/APC to ODVA MPO to ODVA
ODVA LC/UPC ODVA LC/APC ODVA SC/UPC ODVA SC/APC MPO Adapter
P/N: ODVA-I-LCU P/N: ODVA-I-LCA P/N: ODVA-I-SCU P/N: ODVA-I-SCA P/N: ODVA-I-MPO

Livermore, CA 94551 Fax (925) 447-7511

Part Number
ODVA- - - - - - -
1 2 2 3 4 4 5 5 5 5 6 6 6 6 7 7 7 7
1 Cable Size 4 Cable Type 6 Connector Type End 2

5 = 5.0 mm DR = Distribution Singlemode
7 = 7.0 mm Riser Rated SLCU = LC/UPC
DP = Distribution Style SLCA = LC/APC
Plenum Rated SSCU = SC/UPC
2 Fiber Count AP = Interlocking Armor SSCA = SC/APC
Plenum Rated SMSS = MPO
01 = 1 Fiber IR = Indoor/Outdoor SMES = MPO Elite Ferrule
02 = 2 Fibers Riser Rated OLCU = ODVA LC/UPC
04 = 4 Fibers IP = Indoor/Outdoor OLCA = ODVA LC/APC
06 = 6 Fibers Plenum Rated OSCU = ODVA SC/UPC
08 = 8 Fibers OA = Outside Plant OSCA = ODVA SC/APC
12 = 12 Fibers Armored OMSS = ODVA MPO
24 = 24 Fibers ON = Outside Plant OMES = ODVA MPO
Non-Armored Elite Ferrule
AJ = Non-Armored
3 Fiber Type Alternative Jacket Multimode
LZ = Low Smoke Zero SLCM = LC
Singlemode Halogen SSCM = SC
S = SMF-28e+ SMSM = MPO
B = SMF Bend SMEM = MPO Elite Ferrule
5 Connector Type End 1
Insensitive OLCM = ODVA LC
G.657.A1 OSCM = ODVA SC
Singlemode OMSM = ODVA MPO
Multimode
OLCU = ODVA LC/UPC OMEM = ODVA MPO
1 = 62.5/125μm OM1
OLCA = ODVA LC/APC Elite Ferrule
2 = 50/125μm OM2
OSCU = ODVA SC/UPC
3 = 50/125μm OM3
OSCA = ODVA SC/APC
4 = 50/125μm OM4
OMSS = ODVA MPO
OMES = ODVA MPO
7 Length
Elite Ferrule XXXF = Length in Feet
XXXM = Length in Meters
Multimode
OLCM = ODVA LC
OSCM = ODVA SC
OMSM = ODVA MPO
OMEM = ODVA MPO
Elite Ferrule

Livermore, CA 94551 Fax (925) 447-7511
FullAXS IP67 Rated Cable Assemblies

FullAXS IP67 Rated Cable Assemblies are weatherproof
cable assemblies designed for remote radio units.
These assemblies provide robust Fiber to the Antenna

(FTTA) connectivity.
FullAXS assemblies are rodent resistant and feature

bayonet locking style LC connectors for FTTA
applications.
Tethered cap and flexible boot eases installation

constraints.
Available in 5mm or 7mm cable jacket sizes.

• Meets IP67 Standards
• No tools required
• Bayonet style locking mechanism
• Designed for harsh environment applications
• 5mm and 7mm jacket sizes available
• Rodent resistant
Part Number
FULL AX S - - - -
1 2 2 2 2 3 3 3 3 4 4 4 4
1 Cable Size 2 Connector Type 3 Connector Type 4 Length

End 1 End 2
5 = 5.0 mm XXXF = Length in Feet
7 = 7.0 mm FLCU = FULLAXS FLCU = FULLAXS XXXM = Length in Meters
LC/UPC LC/UPC
RLCU = LC/UPC

Livermore, CA 94551 Fax (925) 447-7511
FX IP67 Rated Cable Assemblies

FX IP67 Rated Cable Assemblies are weatherproof cable
assemblies designed for remote radio units.
These assemblies provide robust Fiber to the Antenna

(FTTA) connectivity.
FX assemblies are rodent resistant and feature bayonet

locking style LC connectors for FTTA applications.
FX connector housings are removable and can be

installed at any time to weatherproof any compatible
assembly.
Available in 5mm or 7mm cable jacket sizes.

• Meets IP67 Standards
• No tools required
• Bayonet style locking mechanism
• Designed for harsh environment applications
• 5mm and 7mm jacket sizes available
• Rodent resistant
Part Number
F X- - - -
1 2 2 2 2 3 3 3 3 4 4 4 4
1 Cable Size 2 Connector Type 3 Connector Type 4 Length

End 1 End 1
5 = 5.0 mm XXXF = Length in Feet
7 = 7.0 mm FLCU = FULLAXS FLCU = FULLAXS XXXM = Length in Meters
LC/UPC LC/UPC
FSCU = FULLAXS RLCU = LC/UPC
SC/UPC FSCU = FULLAXS
FMPO = FULLAXS SC/UPC
MPO RSCU = SC/UPC
FMPO = FULLAXS
MPO
RMPO = MPO

Livermore, CA 94551 Fax (925) 447-7511
Connectors, Adapters (Bulkheads), Adapter Plates and Pigtail Fanouts DS-BS-1 04/12/2018
LGX, CCH, & SMP Type Adapter Plates and Pigtail Fanouts
ARIA Adapter Plates are available in 6, 8, 12, and 24-port
designs equipped with adapters only or with adapters and
pigtail fanouts.
Our singlemode adapter sleeves are made of ceramic and

multimode adapter sleeves are made of phosphor bronze
for frequent connector mating and demating endurance.
Adapter plates are available in the LGX, CCH, and SMP

type footprints. Corning equivalent footprint adapter plates
accommodate the CCH, PCH, CCS, WCH, ICH, EDC,
and FZB housing families.
The pigtails fanouts are 100% tested for insertion loss,

return loss, and endface clarity. They are available in 900
μm in mesh, distribution style (MIC), or ribbon in mesh
configurations with singlemode or multimode fiber.
Pigtail Fanout Examples
LGX 12-Fiber Distribution Style (MIC) SC/APC CCH 12-Fiber Distribution Style (MIC) SC/APC
Adapter Plate Formats
LGX CCH SMP
Pigtail Types
900μm in Mesh Distribution Style (MIC) Ribbon in Mesh

Livermore, CA 94551 Fax (925) 447-7511
LGX Adapter Plate Examples
6-Fiber SC/UPC 6-Fiber SC/APC 6-Fiber SC Multimode 6-Fiber SC OM3/OM4
12-Fiber LC/UPC 12-Fiber LC/APC 12-Fiber Multimode 12-Fiber OM3/OM4
24-Fiber LC/UPC 24-Fiber LC/APC 24-Fiber LC Multimode 24-Fiber LC OM3/OM4
6-Fiber ST 6-Fiber FC 8-Fiber ST 8-Fiber FC
12-Fiber ST 12-Fiber FC

Livermore, CA 94551 Fax (925) 447-7511
Pigtail Testing Procedure
PASS
All pigtails fanouts pass the rigorous standards of ARIA
Technologies, Inc.
Each pigtail connector is polished, cleaned, and tested for

insertion loss, return loss, and endface clarity to ensure
optimal signal transfer in accordance with Telcordia
GR-326 Issue 4 requirements.
Part Number
AO K - - - - - -
1 1 1 2 2 3 3 3 4 5 6
1 Adapter Plate 3 Adapter Type 4 Fiber Type 6 Plate Color

Format
Singlemode Singlemode B = Black
LGX = LGX Type SCU = SC/UPC S = SMF-28e+ W = White
SMP = PLP/SMP SCA = SC/APC B = SMF Bend
Type LCU = LC/UPC Insensitive
CCH = CCH Type LCA = LC/APC G.657.A1
FCU = FC/UPC
FCA = FC/APC Multimode
1 = 62.5/125μm OM1
2 Adapter Plate Type STU = ST/UPC
2 = 50/125μm OM2
Multimode 3 = 50/125μm OM3
SCM = SC 4 = 50/125μm OM4
12 = 12 Port (SC/LC/FC/ST) LCM = LC
24 = 24 Port (LC) FCM = FC
STM = ST 5 Pigtail
Note: 6 and 8 port PLP/
SMP and CCH type adapter N = No Pigtail
plates are not available with B = 900 μm in Mesh
FC or ST adapters. C = Distribution Style (MIC)
D = Ribbon in Mesh
8 port CCH type adapter
plates are not available with Note: 3 meter pigtail
SC adapters. length is standard

Livermore, CA 94551 Fax (925) 447-7511
RAPIDConnect® Mechanical Splice Connectors

ARIA RAPIDConnect® Mechanical Splice Connectors are
field installable fiber connectors used to terminate fiber
while in the field.
RAPIDConnect® is a very reliable and easy to install

product that offers superior optical and mechanical
performance when compared with other similar products
due to its unique alignment and matching liquid structure.
RAPIDConnect® Connectors are available in the SC

connector type with either UPC or APC polish.
Designed for drop cable, 900μm, 2.0mm, and 3.0mm

diameter cable.
Features
Linkage Locking Structure (Patent Protected)
RAPIDConnect® locks the fiber and cable simultaneously.
Simply press on the connector housing to lock the cable
and 250µm fiber with a locking ring. No tools are needed.
Ferrule Fiber Coupling (Patent Protected)

The coupling between the fiber and the embedded fiber
are designed in the ferrule and not a “V” groove. This
coupling structure provides high optical performance in
harsh environments.
Closed Matching Fluid Chamber Closed Matching

Coupling Fluid Chamber
(Patent Protected)
The closed matching fluid chamber prevents evaporation
and metamorphism of the matching fluid. This provides
the connector with a long lifespan and environment
adaptability. The connector works perfectly in a wide
temperature range from -40°C to 80°C.
Front Micro Bend
Front Micro Bend (Patent Protected)
The fiber bends just behind the ferrule and eliminates
the gap between the fiber coupling even in extreme Ceramic
temperature conditions. Ferrule
Front Spring Structure

The ferrule can adjust its position in each connection just
like ordinary optical connectors and provides outstanding
optical performance. Spring

Livermore, CA 94551 Fax (925) 447-7511
RAPIDConnect® Mechanical Splice Connectors

Features (Continued)
Back Micro Bend
The back bend structure provides high optical
performance even under high tension.
Sawtooth Cable Locking Structure

The sawtooth cable locking structure greatly improves the Back Micro Bend Cable
tensile strength of the connector. Saw Tooth Cable
Locking Structure
Tool Free Reassembly Structure
RAPIDConnect® supports multiple reinstallations without
any tools.
Staggered Tooth Aramid Cable Locking

Structure (Patent Protected)
This structure provides incredible tensile strength. Aramid Locking Structure
Example
2.0mm Cable Terminated with an ARIA RAPIDConnect®
Mechanical Splice Connector
Specifications
Parameter Value
Typical Insertion Loss at 1310 and 1550nm (dB) 0.15
Maximum Insertion Loss at 1310 and 1550nm (dB) 0.30
Typical Return Loss at 1310 and 1550nm (dB) 58
Minimum Return Loss at 1310 and 1550nm (dB) 55
Fiber Singlemode 9/125µm
Tensile Strength (Drop Cable) (N) >80
Maximum Number of Uses 10
Operation Temperature (°C) -40 ~ 75
Part Number
Description Part Number
Blue SC/UPC RAPIDConnect ®
SC/UPC-FC-B
Green SC/APC RAPIDConnect ®
SC/APC-FC-G

Livermore, CA 94551 Fax (925) 447-7511
Between Series Adapters

ARIA Between Series Adapters are used to quickly
change a UPC type connector into an APC type connector
or an APC type connector into a UPC type connector.
These adapters enable the use of current patchcord stock

where a transition to UPC or APC is needed to complete
the circuit.
ARIA Between Series Adapters are Telcordia GR-326- SC/UPC Female to SC/APC Female to
CORE compliant. SC/APC Male SC/UPC Male
Easy to install on any patchcord or pigtail Short size ensures proper cable bend radius in patch panels
Specifications Features
Insertion Loss: ≤0.2dB Low Insertion Loss
Excellent Return Loss
Return Loss UPC: ≥45dB Environmentally Stable and Reliable
LC/UPC Female to LC/APC Male
Return Loss APC: ≥60dB
Applications
Ferrule/Sleeve Material: Ceramic Telecommunications
CATV
Operating Temperature: -20 to 75°C Fiber to the Home
Local Area Network
Storage Temperature: -40 to 85°C (LAN) Test Equipment
LC/APC Female to LC/UPC Male
Part Number
BSA- - 1 Female Connector
Type
2 Male Connector
Type
1 1 1 2 2 2
SCU = SC/UPC SCU = SC/UPC*
SCA = SC/APC SCA = SC/APC*
*Only available with SC female connector types LCU = LC/UPC LCU = LC/UPC**
**Only available with LC female connector types LCA = LC/APC LCA = LC/APC**

Livermore, CA 94551 Fax (925) 447-7511
CWDM and DWDM Modules DS-BS-1 04/12/2018
WDM Modules (CWDMs and DWDMs)

ARIA’s Optical Fiber WDM Modules carry multiple wavelengths across the same fiber so CATV MSOs can separate
content and push it onto separate wavelengths. The filtered traffic can then be carried over the same fiber and dropped
off at different coaxial termination points within the same node. This effectively splits the node sizes by creating different
delivery points but does not physically alter the HFC configuration. With this technology, the transmission distance does
not matter and one does not have to optimize for a specific distance. The transmitter technology multiplexes the signals
onto the existing fiber and makes sure it can be demultiplexed at the end point: while technically still part of the node, that
end point becomes, in effect, a smaller node.
Low loss and high isolation WDMs are available in various form factors. WDM cassettes can be supplied with adapters
(bulkheads) only, with pigtailed leads, or a combination of both. WDMs are 100% tested for insertion and return loss and
meet Telcordia GR1209 and GR1221 specifications making them suitable for any PON application. The wavelengths
accommodated range from 1310nm to 1625nm.
ARIA Optical Fiber WDM Cassettes are designed to mount in wallmount enclosures, rackmount enclosures, or directly
into a rack or cabinet. Cassettes fit into ARIA Tri-Panel, ARIA 1RU, 2RU, and 4RU RDR Series, RDP Series, as well as
LGX type 5” and 7” height enclosures.
1x8 Mux/Demux WDM Function
Available Form Factors
Module Cassette with 250/900 µm pigtail Cassette

Livermore, CA 94551 Fax (925) 447-7511

Examples
Pre-Terminated with Adapters on Front and Rear Pre-Terminated with Adapters on Rear
Four 2 Channel CWDMs in LGX Four 2 Channel CWDMs in LGX Two 8 Channel CWDMs in LGX
16 Channel CWDM in 2U LGX Two 2 Channel CWDMs in LGX 8 Channel CWDM in “Mini” LGX

Livermore, CA 94551 Fax (925) 447-7511

Example WDM: 16 Channel LGX DWDM
Features
Low Insertion Loss
High Isolation
Low PDL
LGX Footprint
Wide Operating Wavelength
Wide Operating Temperature
High Reliability and Stability
Applications
DWDM System
PON Networks
CATV Links
Specifications
Parameter Value
Channel Spacing (GHz) 100
Center Wavelength (C25-C40) (nm) 1557.36, 1556.56, 1555.75, 1554.94, 1554.13, 1553.33,
1552.52, 1551.72, 1550.92, 1550.12, 1549.32, 1548.52,
1547.72, 1546.92, 1546.12, 1545.32
Channel Pass Band @-0.5 dB (nm) 0.22
IL (dB) ≤4.7
2% Test TX & RX IL (dB) ≤23 RX & ≤27 TX
Adjacent Channel ≥30
Isolation (dB) Non-Adjacent Channel ≥40
EXP Channel ≥12
Ripple (dB) ≤0.4
PDL (dB) ≤0.2
PMD (ps) ≤0.1
RL (dB) ≥45
Directivity (dB) ≥50
Maximum Optical Power (mW) 500
Operating Temperature (°C) -5~75
Storage Temperature (°C) -40~85
Package Dimensions (mm) 129x29x100
Connector Type LC/APC

Livermore, CA 94551 Fax (925) 447-7511

Example WDM: 16 Channel LGX DWDM
Part Number: LGX-16CH-25/40-DWDM-LCA
Description
16 Channel DWDM
ITU C-band channels 25-40
Terminated with LC/APC Connectors
Loaded into an LGX Cassette
Custom Availability
Wavelengths
Adapters
Connectors
Enclosures
Port Configuration
Port and Structure Diagram

Test Rx
Not Used
16-channel
DWDM
Tx COM
Rx EXP
COM All non - 1 thru 16 's

2x2
Coupler (Out) ITU C-band channels 25, 26, 27, (Express or Upgrade port)
28, 29, 30, 31, 32, 33, 34, 35,
36, 37, 38, 39 and 40
2% monitor Out/Mux
Test Tx MUX (Tx)
25 26
27 28 1 16
29 30
Test Rx
31 32 2% monitor In/Demux
16-channel
33 34
COM
DWDM All non- 1 thru 16 's
35 36 2x2
Coupler (In) ITU C-band channels 25, 26, 27, (Express or Upgrade port)
37 38 28, 29, 30, 31, 32, 33, 34, 35,
40
36, 37, 38, 39 and 40
39
Not Used
Test Tx DEMUX (Rx)
ARIA 1 16
Compliance
Telcordia GR-1209-CORE-2001
ITU-T G.694.1
Telcordia GR-1221-CORE-1999
RoHS

Livermore, CA 94551 Fax (925) 447-7511
Micro HD CWDM Cassette

ARIA’s Micro HD CWDM Cassette is a high-density,
compact cassette for CWDM MUX and DEMUX
applications.
The micro HD footprint provides enhanced port

accessibility with 14 front facing LC/APC or LC/UPC
ports and is compatible with LGX type enclosures.
This cassette is approximately half the height and

depth of a standard LGX cassette, providing the user
with significantly improved port density.
Front and side facing channel labels provide the

user with straightforward port identification.
The cassette’s unique micro form factor and

increased port density allows for port groupings by
function increasing network architecture versatility.
Features
• Industry leading micro form factor: • LGX mounting compatible
5.08 x 0.63 x 4.16 (H” x W” x D”)
• High channel isolation
• Up to 14 LC ports on the faceplate enables
• Low insertion loss
design and configuration versatility
• Rugged metal housing
• Front and side facing labels improve port
identification • Wideband 1310nm express port
• Port layout designed to optimize patch cord • DWDM upgrade port available
management • Optional test ports
Specifications
Parameter Value
Channel Wavelength (nm) 1271~1611
Center Wavelength Accuracy (nm) ±0.5
Channel Passband (@-0.5dB bandwidth (nm) ±7.5/±6.5
Insertion Loss (dB) ≤2.5
Channel Uniformity (dB) ≤1.0
Channel Ripple (dB) <0.3
Isolation Adjacent / Non-Adjacent (dB) >30 / >40

Livermore, CA 94551 Fax (925) 447-7511
Micro HD CWDM Cassette

Specifications (Continued)
Parameter Value
Isolation Express with Filter / Express without Filter (dB) >30 / >12
Insertion Loss Temperature Sensitivity (dB/°C) <0.005
Polarization Dependent Loss (dB) <0.1
Polarization Mode Dispersion (ps) <0.1
Directivity (dB) >50
Return Loss (dB) >45
Maximum Power Handling (mW) 300
Operating & Storage Temperature (°C) -40~+85
Part Number
MH DC W D M - - - - - - -
1 1 2 2 3 3 3 3 4 5 6 7 7 7
1 Type 3 Starting Channel 4 Test Port

(20 nm spacing)
M1 = Multiplex (10-13 Channels) N = None
D1 = Demultiplex (10-13 Channels) 1271 = 1271 nm T = Test Port
MD = Multiplex and Demultiplex (3-6 Channels) 1291 = 1291 nm
M2 = Double Multiplex (3-6 Channels) 1311 = 1311 nm
D2 = Double Demultiplex (3-6 Channels) 1331 = 1331 nm 5 Upgrade Port
Note: The number of available channels is based 1351 = 1351 nm
1371 = 1371 nm N = None
on the presence of test, upgrade, and express ports U = Upgrade port
1391 = 1391 nm
2 Number of Channels
1411 = 1411 nm
1431 = 1431 nm
01 = 1 Channel 1451 = 1451 nm 6 Express Port
02 = 2 Channels 1471 = 1471 nm
N = None
03 = 3 Channels 1491 = 1491 nm
E = Express port
04 = 4 Channels 1511 = 1511 nm
(1260-1360nm)
05 = 5 Channels 1531 = 1531 nm
06 = 6 Channels 1551 = 1551 nm
1571 = 1571 nm
7 Connector Type
07 = 7 Channels
08 = 8 Channels 1591 = 1591 nm
09 = 9 Channels 1611 = 1611 nm LCU = LC/UPC
10 = 10 Channels LCA = LC/APC
11 = 11 Channels
12 = 12 Channels
13 = 13 Channels

Livermore, CA 94551 Fax (925) 447-7511
Plug & Play and Splice Cassettes DS-BS-1 04/12/2018
MPO/MTP® Cassette Module

ARIA’s MPO/MTP® Cassette Module is an LGX format LC Duplex
cassette that transitions between MPO/MTP® and LC or Connector
SC connectors.
This module is used to interconnect MPO/MTP®

backbones with LC or SC patch cords.
The cassette faceplate features SC or LC adapters and

the rear of the cassette features MPO/MTP® adapters.
MTP®
Various mounting options are available to mount the Connector
MPO/MTP® Cassette Module in a rack or on a wall.
Available Formats
12 Fiber SC to 12 Fiber MPO/MTP® 12 Fiber LC to 12 Fiber MPO/MTP® 24 Fiber LC to dual 12 Fiber MPO/MTP®
Accessories
6X MPO/MTP® Cassette Module 2RU Wallmount/Rackmount Bracket

P/N: 6XLGXW-RBRACKET-B-OT

Livermore, CA 94551 Fax (925) 447-7511
Plug & Play and Splice Cassettes DS-BS-1 04/12/2018
MPO/MTP® Cassette Module

Accessories
3X MPO/MTP® Cassette Module 1RU LGX Wallmount/Rackmount Bracket

P/N: 3XLGXW-RBRACKET-B-OT
2X MPO/MTP® Cassette Module Wallmount Bracket MPO/MTP® Cassette Module Wallmount Bracket
P/N: 2XLGXWMBRACKET-B-OT P/N: MPO-BRACKET-B
MPO/MTP® Cassette Module Shroud MPO/MTP® Cassette Module Shroud with Door
P/N: AFP-LGX-SHROUD P/N: AFP-LGX-SHROUD-WD
Part Number
M C M- - -
1 1 2 2 2 3
1 Adapter Plate Type 2 Adapter Type 3 Fiber Type

12 = 12 Port (SC/LC) Singlemode Multimode Singlemode Multimode
24 = 24 Port (LC) SCU = SC/UPC SCM = SC S = SMF-28e+ 1 = 62.5/125μm OM1
SCA = SC/APC LCM = LC B = SMF Bend 2 = 50/125μm OM2
LCU = LC/UPC Insensitive 3 = 50/125μm OM3
LCA = LC/APC G.657.A1 4 = 50/125μm OM4

Livermore, CA 94551 Fax (925) 447-7511
Splitters and Couplers DS-BS-1 04/12/2018
Splitters and Couplers

ARIA splitters and couplers are bi-directional multi-port
devices which effectively combine or separate optical signals
in singlemode fiber systems.
The singlemode standard couplers are manufactured using

the fused biconic taper (FBT) process to ensure consistency
in quality, reliability and high performance in a wide range of
applications.
Splitting ratios can be designed to meet customer

specifications. Various types of pigtails and connector
terminations are available.
Coupling ratio: 1-99% Telecommunications
Low insertion loss CATV
Excellent uniformity Subscriber loop
Low PDL Fiber-to-the-home
High directivity Local Area Network (LAN)
Bidirectional Test equipment
Environmentally stable and reliable Optical fiber sensors
602 Series Tree Coupler 600 Series Dual Window Coupler Splitter Cassette
Bare Optical Fiber Splitters Rackmount Splitters

Livermore, CA 94551 Fax (925) 447-7511
Planar Lightwave Circuit (PLC) Splitter Cassettes

ARIA Planar Lightwave Circuit (PLC) Splitter Cassettes
are optical power management devices that are fabricated
using silica optical waveguide technology.
They come in the LGX Cassette form factor, feature

SC/UPC, SC/APC, LC/UPC, or LC/APC adapter types, and
are available in 1x2, 1x4, 1x8, and 1x16 configurations.
ARIA PLC Splitter Cassettes feature small size, high

reliability, wide operating wavelength range and good
channel-to-channel uniformity, and are widely used in PON
networks for optical signal power splitting.
ARIA PLC Splitter Cassettes meet Telcordia

GR-1209-CORE, Telcordia GR-1221-CORE,
and RoHS requirements.
• Low Insertion loss • FTTX Systems
• Low PDL • PON Networks
• Compact Design • CATV Links
• Good channel-to-channel uniformity • Optical Signal Distribution
• Wide Operating Wavelength: From 1260nm to 1650nm
• Wide Operating Temperature: From -40 to 85 °C
• High Reliability and Stability
Specifications
Parameter 1x2 Splitter 1x4 Splitter 1x8 Splitter 1x16 Splitter
Values Values Values Values
Operating Wavelength (nm) 1260~1650 1260~1650 1260~1650 1260~1650
Fiber Type G657A1 G657A1 G657A1 G657A1
Insertion Loss (dB) 4.0 7.3 10.5 13.7
Loss Uniformity (dB) 0.4 0.6 0.8 1.2
Polarization Dependent Loss (dB) 0.2 0.2 0.2 0.25
Return Loss (dB) 50 50 50 50
Directivity (dB) 55 55 55 55
Wavelength Dependent Loss (dB) 0.3 0.3 0.3 0.5
Operating/Storage Temperature (°C) -40~85 -40~85 -40~85 -40~85
Cassette Dimensions (HxWxD) (mm) 129 x 23 x 70 129 x 23 x 70 129 x 23 x 70 129 x 23 x 70

Livermore, CA 94551 Fax (925) 447-7511
Planar Lightwave Circuit (PLC) Splitter Cassettes

Configurations
1x4 LC/UPC 1x8 LC/UPC 1x16 LC/UPC 1x2 SC/APC 1x4 SC/APC 1x8 SC/APC
Part Number
M L G X P LC - -
1 1 2 2 2
1 Configuration 2 Adapter Type

02 = 1x2 Splitter SCU = SC/UPC
04 = 1x4 Splitter SCA = SC/APC
08 = 1x8 Splitter LCU = LC/UPC
16 = 1x16 Splitter LCA = LC/APC

Livermore, CA 94551 Fax (925) 447-7511
1RU Rackmount Splitter
1x32 Splitter with SC/UPC Connectors Shown
Overview
One 1x16, 1x32 , or 1x64 PLC Splitter
Loaded into a 1RU Rackmount Enclosure
Available with SC/UPC, SC/APC, LC/UPC, or LC/APC adapters
Low Insertion Loss FTTH Systems
High Isolation PON Network
Low PDL CATV Links
Compact Design Communication Equipment
Good Channel-to-channel Uniformity
Wide Operating Wavelength
High Reliability and Stability
Specifications
Parameter 1x16 Splitter Values 1x32 Splitter Values 1x64 Splitter Values
Operating Wavelength (nm) 1260~1650 1260~1650 1260~1650
Maximum Insertion Loss (dB) ≤13.7 ≤16.9 ≤21.0
Maximum Uniformity (dB) ≤1.0 ≤1.5 ≤2.0
Maximum PDL (dB) ≤0.20 ≤0.25 ≤0.30
Minimum Return Loss (dB) ≥55 ≥55 ≥55
Minimum Directivity (dB) ≥55 ≥55 ≥55
Operating Temperature (°C) -5~+70 -5~+70 -5~+70
Storage Temperature (°C) -40~+80 -40~+80 -40~+80
Enclosure Dimensions (HxWxD) 1.75”x17.00”x8.00” 1.75”x17.00”x8.00” 1.75”x17.00”x8.00”

Livermore, CA 94551 Fax (925) 447-7511
1RU Rackmount Splitter

Port Diagrams
ARIA
IN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1x16 Splitter with SC Connectors
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31
ARIA 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
IN
Custom Availability Compliance

Adapters Telcordia GR-1209-CORE
Enclosures Telcordia GR-1221-CORE
Port Configurations YD/T-1272Q
Q/CT-2295
RoHS
Part Number
1 R U S P L IT T E R - -
1 1 2 2 2
1 Port Configuration 2 Adapter Type

16 = 1x16 Splitter SCU = SC/UPC
32 = 1x32 Splitter SCA = SC/APC
64 = 1x64 Splitter LCU = LC/UPC
LCA = LC/APC
Alternate Port Configurations are Available Upon Request

Livermore, CA 94551 Fax (925) 447-7511
Enclosures for Splitters, Couplers, and WDMs
1 RU RDR accommodates 3 cassettes 2 RU RDR accommodates 6 cassettes 7” 4 RU LGX Patch Series

accommodates 12 cassettes
TRI-2X accommodates 2 cassettes TRI-4X accommodates 4 cassettes TRI-6X accommodates 6 cassettes
3 Module 1RU LGX 2 Module LGX Wallmount Bracket 6 Module 2RU LGX
Wallmount/Rackmount Bracket P/N: 2XLGXWMBRACKET-B-OT Wallmount/Rackmount Bracket
P/N: 3XLGXW-RBRACKET-B-OT P/N: 6XLGXW-RBRACKET-B-OT
1 RU Rackmount Panel accommodates 1x32 Splitters Splice Trays accommodate Splitters and WDM Modules
(DWDMs and CWDMs)
Contact sales for additional information

Livermore, CA 94551 Fax (925) 447-7511
Attenuators DS-BS-1 04/12/2018
Attenuators
Fiber attenuators are used to control the power level of optical
communication signals at the output of the light source and E/O
converters. They are also used for the testing of linearity and
dynamic range in photosensors.
ARIA attenuators are Telcordia GR-910-CORE compliant.

Attenuation variations of 5% for <10 dB and 10% for >10 dB
ensure accurate power output.
Testing
Water Immersion - 7 days in 43°C, 5.5 pH water Side Pull - 0.55 lb or 2.75 lb load at a 90 degree angle
Vibration - 10-55 Hz freq, 1.52 mm amp for 2 hours Cable Retention - 1 lb, 1.54 lb, or 4.4 lb load for 1 min
Flex Test - 100 cycles with a 0.5 lb or 2 lb load Durability - 200 mating cycles with 3 ft, 4.5 ft, or 6 ft length
Twist Test - 10 cycles with a 1.1 lb, 1.65 lb, or 3 lb load Impact Test - 8 cycles with a 6 ft drop on 3 different axes
Features Applications Specifications

Precise attenuation values Telecommunications Attenuation Range: 3~20 dB
Environmentally stable and reliable CATV Operating Temperature: -40 to 75 °C
Excellent return loss Fiber-to-the-home Storage Temperature: -50 to 85 °C
Bidirectional Local Area Network Return Loss UPC: >55dB
No air gap (LAN) Test Equipment Return Loss APC: >60dB
Part Number
AT N - - - -
1 1 1 2 2 3 3 4
1 Connector Type 2 Wavelength 4 Multimode

Specifications
Singlemode 35 = Singlemode 1310 nm and 1550 nm
SCU = SC/UPC 85 = Multimode 850 nm Leave Blank for
SCA = SC/APC 03 = Multimode 1300 nm Singlemode
LCU = LC/UPC 83 = Multimode 850 nm and 1300 nm
LCA = LC/APC 3 = OM3 Aqua Body
FCU = FC/UPC 4 = OM4 Violet Body
FCA = FC/APC 5 = 50 μm
STU = ST/UPC
3 dB Value 6 = 62.5 μm
Multimode 01 = 1 dB 10 = 10 dB
SCM = SC 03 = 3 dB 15 = 15 dB
LCM = LC 05 = 5 dB 20 = 20 dB
FCM = FC Custom Values are Available
STM = ST

Livermore, CA 94551 Fax (925) 447-7511
Inspecting, Cleaning, Splicing, and Testing Equipment DS-BS-1 04/12/2018
Splice Trays
12 Fiber Single Fiber Fusion Splice Tray (4”x6”) 12 Fiber Single Fiber Fusion Splice Tray (3”x5”)
P/N: 4612CWMP P/N: 3512CWMPST
24 Fiber Single Fiber Fusion Splice Tray (4”x7”) 6 Position Ribbon Fiber Mass Fusion Splice Tray (4”x7”)
P/N: 4724CWMPST P/N: 4772CWMPST
24 Fiber Single Fiber Fusion Splice Tray (4”x8”) 6 Position Ribbon Fiber Mass Fusion Splice Tray (4”x8”)
P/N: 4824CWMP P/N: 4872RCWM

Livermore, CA 94551 Fax (925) 447-7511
Splice Trays
48 Fiber Single Fiber Fusion Splice Tray 18 Position Ribbon Fiber Mass Fusion Splice Tray
P/N: AT1B-F/F P/N: AT1B-MF/MF
24 Fiber Single Fiber Fusion or 4 Position Ribbon Fiber Mass 24 Fiber Single Fiber Fusion or 4 Position Ribbon Fiber Mass
Fusion Splice Tray (4”x7”) (P/N: 4x7-ST-ACCG) Fusion Splice Tray (4”x9”) (P/N: 4812C4RMTB)
24 Fiber Single Fiber Fusion or 20 Position Ribbon Fiber Mass 48 Fiber Single Fiber Fusion or 8 Position Ribbon Fiber Mass
Fusion Splice Tray (5”x12”) (P/N: 5712CWMPST) Fusion Splice Tray (5”x12”) (P/N: 5712CWMP48ST)
48 Fiber Single Fiber Fusion Splice Tray (5”x12”) 26 Fiber Single Fiber Fusion Splice Tray for Use with RTV (4”x8”)
P/N: 5712CWMP48STX P/N: 4826RTVCWMP

Livermore, CA 94551 Fax (925) 447-7511
Splice Sleeves (Single and Mass Fusion)

ARIA Splice Sleeves provide mechanical and environmental
protection for fusion splices of fiber.
ARIA Splice Sleeves are compatible with most of the industry

standard fiber management systems and organizers.
ARIA Splice Sleeves are available for single fusion splicing

of single fibers and mass fusion splicing of multiple fibers.
Mass fusion splice sleeves protect ribbons with two to twelve

fibers.
Features
• Protect single or mass fusion splices
• Fits into most splice holders
• Quick shrink-down time
• Low temperature hot-melt adhesive encapsulates the splice
• Ceramic rod ensures proper alignment and rigidity
Ordering Information
Product Name Quantity Part Number
Fusion splice sleeve, standard, 40mm 50/pack FSSSD-040
Fusion splice sleeve, standard, 60mm 50/pack FSSSD-060
Fusion splice sleeve, slim, 16mm 50/pack FSSSL-016
Fusion splice sleeve, mini, 10mm 100/pack FSSMI-010
Fusion splice sleeve, micro,10mm 100/pack FSSMR-010
Fusion splice sleeve, micro, 25mm 100/pack FSSMR-025
Fusion splice sleeve, micro, 40mm 100/pack FSSMR-040
Fusion splice sleeve, ribbon, polyetherimide, 40mm 25/pack FSSRB-P40
Fusion splice sleeve, ribbon, quartz, 40mm 25/pack FSSRB-Q40
Fusion splice sleeve, ribbon, 45mm 50/pack FSPS-45MM-R

Livermore, CA 94551 Fax (925) 447-7511
Launch Boxes
Launch boxes aid in the testing of fiber optic cable when using
an Optical Time Domain Reflectometer (OTDR). Launch boxes
are used with OTDRs to help minimize the effects of the OTDR’s
launch pulse on measurement uncertainty. They are used for
Installation/Testing, Training, and Calibration. They can also be
called a Pulse Suppressor or Delay Line.
All ARIA Launch Boxes are terminated with low loss connectors
for exceptional accuracy and performance.
Launch boxes are available with 1 km of fiber and different

connector configurations.
Features
• The lockable compound latch provides a positive seal and easy opening capability
• Nonmetal constructed lightweight case will not dent, corrode, or conduct electricity
• Water and dust proofing allows the unit to be taken into almost any environment
• Auto purge valve allows for changes in altitude and temperature
Specifications
Parameter Value
Enclosure Dimensions (H”xW”xD”) 9.37 x 5.55 x 2.64
Enclosure Capacity (km) 1.0
Material SR Polypropylene
Color Yellow/Black
Enclosure Weight Without Fiber (kg) 0.75
Operating Temperature -40° to +55 °C
Typical Loss for 1000 m < 1dB @ 1310nm
Fiber Type Singlemode Fiber - Corning 9/125 - SMF-28e+
Part Number
1 Input Connector/ 2 Output Connector/
Adapter Type Adapter Type
LB - - SCU = SC/UPC
SCA = SC/APC
SCU = SC/UPC
SCA = SC/APC
1 1 1 2 2 2 LCU = LC/UPC LCU = LC/UPC
LCA = LC/APC LCA = LC/APC
FCU = FC/UPC FCU = FC/UPC
FCA = FC/APC FCA = FC/APC

Livermore, CA 94551 Fax (925) 447-7511
Fiber Test Box (Network Simulation System)

The ARIA Fiber Test Box (Network Simulation System)
allows the user to easily simulate optical networks of
different lengths and with varying numbers of splices and
connector matings, all in your work area.
The ARIA Fiber Test Box (Network Simulation System)

comes in a black 3RU size chassis with rackmount
brackets for recessed mounting in both 19” and 23” racks.
Enclosures are stackable and bolt together.
Select from 1 to 8 channels per enclosure and up to 50

km of total fiber per enclosure.
Overview
These systems allow the user to measure true loss through fiber, connectors, and splices. They also allow the user to
measure signal delay which is not possible with attenuators. By connecting different reel lengths, either with patch cords
or splices, the user can create many different channel lengths to test their network products.
The ARIA Fiber Test Box (Network Simulation System) is offered with SMF-28e+ singlemode fiber, 62.5/125μm multimode
fiber, 50/125μm multimode fiber, 50/125μm OM3 multimode fiber, and 50/125μm OM4 multimode fiber.
Choose any industry standard fiber optic connector type for your channel end terminations.
Connector Saver Jumper Feature

All systems come with the ARIA standard Connector Saver (CS) Jumper feature. This ensures that the wear and tear of
multiple connector matings occurs on the CS jumper and not on the connectorized end of each channel. Replacement of a
worn channel end is as simple as replacing a jumper. Your system stays up and no retermination is needed.
Modular Design
1A
10.0
de Fiber Km 1B
Singlemo 2A
10.0
2B
Km
1A 1A
10.0 10.0
de Fiber
1B
de Fiber
1B Km
Singlemo
Km
Singlemo 2A 2A
10.0 10.0
2B 2B
Km Km
1A 1A 1A
10.0 10.0 10.0
de Fiber de Fiber de Fiber
1B 1B Km 1B
Km Km
Singlemo 2A Singlemo 2A Singlemo 2A
10.0 10.0 10.0
2B 2B 2B
Km Km Km

Livermore, CA 94551 Fax (925) 447-7511
Precision Optical Fiber Cleaver

The Precision Optical Fiber Cleaver is the ultimate tool for single fiber
cleaving.
Built on a robust, high-quality platform, the Precision Optical Fiber

Cleaver is ideal for use with fusion splicing or other precision
applications, setting a new standard for flexibility and performance.
The Precision Optical Fiber Cleaver works with 250 to 900 micron
coated single fibers.
A fiber scrap collector helps maintain loose scraps resulting from

cleaving. The scrap collector works to automatically grab and store the
scrap fibers as the cleaver’s lid is raised following a completed cleave.
Features
• Used for single fiber cleaving
• Utilizes an automatic anvil drop for fewer required steps and better cleave consistency
• Prevents double scoring of the fibers
• Has superior blade height and rotational adjustment
• Automatic fiber scrap collection
• Can be operated with minimal steps
Specifications
Parameter Value
Dimensions (HxWxD) 63 x 63 x 65 mm
Weight 475 g
Coating Diameter 0.25 - 0.90 mm (Single)
Cladding Diameter 0.125 mm
Cleave Lengths 9 - 16 mm (Single Fiber - 0.25 mm Coating)
10 - 16 mm (Single Fiber - 0.90 mm Coating)
Typical Cleave Angle 0.5 Degrees
Typical Blade Life 36,000 Fiber Cleaves
Number of Steps for Cleave 2
Blade Adjustments Rotational & Height
Part Number
Precision Fiber Optic Cleaver: FC-6S-C
Replacement Cleaver Blade: FCP-BL

Livermore, CA 94551 Fax (925) 447-7511
Connector Cleaning Products

Dust and contaminant free connectors and adapters are
critical to error free operation. Due to the sensitivity of fiber
optic systems, contamination can occur at many stages of
its transportation and implementation. Proper inspection,
cleaning, and installation of fiber optic connectors and
adapters is of paramount importance to installing and
maintaining an operational fiber optic network.
Particles of dust, oil from skin, and other contaminants

trapped in the connection between two pieces of fiber can
cause attenuation due to back reflections, air gaps, and
misalignment. It can also damage the glass surface of the
connector.
NTT-AT Cleaning Kit

The NTT-AT Cleaning Kit is a dry cloth cleaning system that provides excellent cleaning performance for single-fiber and
multi-fiber connectors. ARIA also offers NTT-ME Cletop Optical Connector Cleaner products.
Specifications Applications
Dispenser Material: ABS Resin The NTT Cleaning Kit accommodates multi-fiber and single-
Dimensions: 83 x 127 x 48 mm fiber connectors. The kit can be configured to clean male
Weight: 150 g and female MT, male and female MT-RJ, 1.25mm (LC, MU),
Cleanings: 400 per reel or 2.5mm (SC, FC) connectors.
Connector Cleaning Tool

The ARIA Connector Cleaning Tool is a mechanical cleaning
tool designed to clean mated and unmated connectors.
A simple pushing motion engages the tool with an audible

click. Unit permits over 525+ engagements. Dry cleaning
strand eliminates the need for solvents. Crush resistant to
over 250N and impact resistant to survive drops over 1.5M.
Dirty End Face Clean End Face

Livermore, CA 94551 Fax (925) 447-7511

In a study conducted by NTT-Advanced Technology, 80% of network owners (blue) and 98% of installers (gray)
reported that issues with connector cleanliness and contamination were the greatest cause of network failure.
Contamination of the
connector endface
Poor polishing
of the ferule
Mistakes in attaching
labels to the cable
Damage to the
optical connector
Damage on the
ferrule endface
Defective
splicing
Excessive bending
for the cable
0 10 20 30 40 50 60 70 80 90 100
Network Installer

Livermore, CA 94551 Fax (925) 447-7511

NTT-ME Cletop Products
Product Name Part Number Description
Cletop Type-A Cassette CLRSL 1 pc (2-slotted window)
Cletop Type-B Cassette CLROP 1 pc (Open window)
Cletop MPO Cassette CLRMP 1 pc (Open MPO window)
Cletop MT-RJ Cassette CLRMT 1 pc (Open MT-RJ window)
Cletop S Type-A Cassette CLRSA 1 pc (2-slotted window)
Cletop S Type-B Cassette CLRSB 1 pc (Open window)
Cletop Replacement Reel CLETR 1 case (6 reels)
Cletop Stick 1.25mm CLST12 1 case (200 pcs)
Cletop Stick 2.50mm CLST25 1 case (200 pcs)
NTT-AT Reel Cleaner Products

Product Name Part Number Description
Reel Cleaner Cassette -SL FCRSL 1 pc (2-slotted window)
Reel Cleaner Cassette -OP FCROP 1 pc (Open window)
Reel Cleaner Cassette -MPO FCRMP 1 pc (Open MPO window)
Reel Cleaner Cassette -MT-RJ FCRMT 1 pc (Open MT-RJ window)
Replacement Reel FCRRF 1 case (6 reels)
Card Cleaner FCRWH 1 pc (with 10 sheets)
Card Cleaner Refill FCCRF 1 box (10 pack=100 sheets)
Stick Cleaner 1.25mm FCST12 1 case (200 pcs)
Stick Cleaner 2.50mm FCST25 1 case (200 pcs)

Livermore, CA 94551 Fax (925) 447-7511

Connector Cleaning Tools
Connector Cleaning Tools are designed to clean SC, ST,
FC, E2000, LC, MU, MTP® and generic MPO connectors.
Connector Cleaning Tools clean unmated cable

assemblies and connectors loaded in a bulkhead adapter.
The advanced “push” style connector cleaner is quick

and efficient at removing contaminants and keeping your
network infrastructure running clean.
Specifications
• Unit performs over 525 cleanings.
• MPO/MTP® Connector Cleaning Tool cleans male (with guide pins) and female MT ferrules
• MPO/MTP® Connector Cleaning Tool cleans multimode (flat) and singlemode (8° angled) MT ferrules
• RoHS compliant
Dimensions
19
43
198.3
Part Number
Part Number Description
9392 SC – SC, ST, FC, and E2000 connectors
9393 LC – LC and MU connectors
7104 MPO/MTP® connectors

Livermore, CA 94551 Fax (925) 447-7511
Cable Management and Cable Clamps DS-BS-1 04/12/2018
Cable Clamps
12A1, 12A2, and 12A3 style cable clamps are compatible
with ARIA strain relief brackets.
12A1 cable clamps are used to secure and ground a

metallic sheath cable with an outside diameter of 0.4” to
0.999” (1.016 cm to 2.537 cm).
12A2 cable clamps are used to secure a dielectric sheath

cable with an outside diameter of 0.4” to 0.999” (1.016 cm
to 2.537 cm).
12A3 cable clamps are used to secure and ground both

Metallic and Dielectric Sheath Cable types with an outside
diameter of 0.25” to 1.50” (0.635 cm to 3.81 cm).
Bracket to accept 12A1 and 12A2 type cable clamps on 12A1 Cable Clamp for Metallic Sheath Cable
LGX, OSEC, and ARM style enclosures (P/N: SRE-W) P/N: 104-384-490
12A2 Cable Clamp for Dielectric Sheath Cable 12A3 Cable Clamp for 0.25”-1.25” Diameter Cable
P/N: 106-230-337 P/N: 108-527-423

Livermore, CA 94551 Fax (925) 447-7511
ARIA Lightpaths Raceway for Cable Management

Lighpaths™ Fiber Protection System, ducting, or
raceway is the ideal system for routing and protecting
cables routed through exchanges, central offices, CATV
headends, data centers, collocation sights, hubs, shelters,
nodes, and customer premises.
Lighpaths™ maintains a 2” bend radius throughout the

system. Lighpaths™ is the only Halogen-free system on
the market, and the only system that exceeds Telcordia
GR-63 NEBS requirements as tested by an independent
third party test lab.
Mounting Hardware
The parts connecting the Lighpaths™ system do not require mounting hardware. No other system on the market can
make this claim. Parts are assembled in seconds with the new patented slide-on-joiner. Vertical drops can be added in
less than 5 minutes by snapping them in place with no mounting hardware required. Drops exit the side of the raceway in
order to not interfere with overhead ladder racking. Lighpaths™ is available in all popular sizes to accommodate virtually
any application.
Available Services
Mounting kits are available to affix the ducting to the ladder racking, threaded rod, cabinets, racks, and wall. Technical
application assistance and field support is provided to end-users, installers, and contractors. Installation services and
engineering services are also available.
Typical Installations
Colocation Sites or Central CATV Headends or Data Customer Premises, Hubs, Fiber Frame Management
Offices Centers or Shelters
Standards
• ISO 9001 Certified Quality Management System by NCS International
• Fire retardant plastic, Halogen Free, UL94-VO rated
• UL2024A standard
• EEU - ROHS requirements

Livermore, CA 94551 Fax (925) 447-7511

Capacity
Raceway Size (HxW) 2”x2” 4”x4” 4”x8” 4”x12”
(50mm x 50mm) (100mm x 100mm) (100mm x 200mm) (100mm x 300mm)
Max Patchcord 145 720 1100 1500
Capacity (3.0 mm OD)
Solid Straight Sections

Solid straight sections are used for horizontal routes.
Standard length is 2 meters (6.5 feet). Lids are hinged,

providing easy accessibility.
Part Numbers
Size (HxW) Body Part Number Cover Part Number
2”x2” (50mm x 50mm) TC1279-81 TC1279-80
4”x4” (100mm x 100mm) TC1279-23NS TC1279-24
4”x8” (100mm x 200mm) TC1279-21NS TC1279-22
4”x12” (100mm x 300mm) TC1279-275NS TC1279-276
Slotted Straight Sections

Slotted straight sections are used for vertical routes
bringing cables to equipment in racks or cabinets.
Slot trumpets provide bend radius protection (order

separate).
Slot Trumpets provide the

proper bend radius for
cables exiting
Part Numbers
Size (HxW) Part Number
2”x2” (50mm x 50mm) (includes mounting hardware & short lid) TC1279-81SLAKit
Slot trumpets (can be used with any slotted straight section)(10 per bag) TC1279-212

Livermore, CA 94551 Fax (925) 447-7511

Horizontal Tees & Covers
Horizontal Tees are used to change directions
perpendicular to the main route.
Tees can also tee-off in a different size (i.e. 4”x 8” to

4” x 4”).
Use tees at corners where horizontal routes may

continue.
Part Numbers
2”x2” (50mm x 50mm) TC1279-75A Supplied with body
4”x4” (100mm x 100mm) TC1279-03NS TC1279-04
4”x8” (100mm x 200mm) TC1279-01NS TC1279-02
4”x12” (100mm x 300mm) TC1279-279NS TC1279-280
Horizontal Crosses & Covers

Horizontal Crosses are used to change directions
Part Numbers
2”x2” (50mm x 50mm) TC1279-139A Supplied with body
4”x4” (100mm x 100mm) TC1279-71 TC1279-70
4”x8” (100mm x 200mm) TC1279-61 TC1279-62
4”x12” (100mm x 300mm) TC1279-300 TC1279-300L

Livermore, CA 94551 Fax (925) 447-7511

Horizontal Elbows & Covers
Horizontal Elbows are used to change directions
Elbows are ideal for use at corners where horizontal

routes will not continue.
30, 45, and 90 degree elbows are available.
Part Numbers
Angle Size (HxW) Body Part Number Cover Part Number
30 Degree 2”x2” (50mm x 50mm) TC1279-77-30A Supplied with Body
30 Degree 4”x4” (100mm x 100mm) TC1279-31-30 TC1279-32-30
45 Degree 2”x2” (50mm x 50mm) TC1279-77-45A Supplied with Body
45 Degree 4”x12” (100mm x 300mm) TC1279-304 TC1279-305
90 Degree 2”x2” (50mm x 50mm) TC1279-77A Supplied with Body
End Caps
End Caps are used to close the end of a horizontal or
vertical route.
Some end caps are used with tubing to drop cables into
frames or cabinets.
Part Numbers
Size (HxW) Body Part Number
2”x2” (50mm x 50mm) TC1279-127D
4”x4” (100mm x 100mm) TC1279-57
4”x4” (100mm x 100mm), with 2 ea 5 feet length tubes TC1279-57B2Kit
4”x8” (100mm x 200mm) TC1279-56
4”x12” (100mm x 300mm) TC1279-288

Livermore, CA 94551 Fax (925) 447-7511

Vertical Elbows & Covers
Vertical Elbows are used to change directions upward or
downward to avoid obstacles.
45 and 90 degree elbows are available in most sizes.
Retro elbows are supplied with a slit in the body to

permit entrance of existing cables without the need to
disconnect.
Vertical Elbow Retro Elbow
Part Numbers
Type and Angle Size (HxW) Body Part Number Cover Part Number
Elbow Up 45 Degree 2”x2” (50mm x 50mm) TC1279-143-45A Supplied with Body
Elbow Up 45 Degree 4”x12” (100mm x 300mm) TC1279-283 TC1279-284
Elbow Up 90 Degree 2”x2” (50mm x 50mm) TC1279-143A Supplied with Body
Elbow Up 90 Degree 4”x12” (100mm x 300mm) TC1279-298 TC1279-284A
Elbow Down 45 Degree 2”x2” (50mm x 50mm) TC1279-87-45A Supplied with Body
Elbow Down 45 Degree 4”x12” (100mm x 300mm) TC1279-285 TC1279-285L
Elbow Down 90 Degree 2”x2” (50mm x 50mm) TC1279-87A Supplied with Body
Elbow Down 90 Degree 4”x12” (100mm x 300mm) TC1279-296A TC1279-286A
Retro Elbow Down 90 Degree 4”x4” (100mm x 100mm) TC1279-111R Supplied with Body
Retro Elbow Down 90 Degree 4”x8” (100mm x 200mm) TC1279-123R Supplied with Body
Retro Elbow Up 90 Degree 4”x4” (100mm x 100mm) TC1279-113R Supplied with Body
Retro Elbow Up 90 Degree 4”x8” (100mm x 200mm) TC1279-125R Supplied with Body

Livermore, CA 94551 Fax (925) 447-7511

Flared Trumpets
Flared Trumpets are used to ensure proper bend radius
for cables exiting vertically from the horizontal route.
Part Numbers
Size (HxW) Body and Cover Part Number
2”x2” (50mm x 50mm) TC1279-93A
4”x4” (100mm x 100mm) TC1279-218A
4”x8” (100mm x 200mm) TC1279-289R
Downspouts
Downspouts are typically used for adding drops to an
existing horizontal route.
By exiting the side of the system, interference with ladder

racking and other objects, typically mounted above the
horizontal raceway, is avoided.
To use the downspout to add drops, a quick punch-out

is made in the side wall, and a bend-radius ramp and
downspout are snapped into place in a few seconds.
Part Numbers
Size (HxW) Kit Part Number
2”x2” (50mm x 50mm) Punch Tool TC1279-50
4”x4” (100mm x 100mm) Punch Tool TC1279-231A
2”x2” (50mm x 50mm) Downspout TC1279-93KIT
4”x4” (100mm x 100mm) Downspout TC1279-111KIT

Livermore, CA 94551 Fax (925) 447-7511

Pre-assembled Downspouts
Pre-assembled Downspouts are horizontal tees
with vertical downspouts. By exiting the side of the
system, interference with ladder racking and other
objects, typically mounted above the horizontal
raceway, is avoided.
Kits can be supplied with downspouts pre-

assembled on one or both sides of short straight
section. To use the downspout to add drops, just
assemble to a slide-on joiner which takes seconds.
Part Numbers
4”x4” (100mm x 100mm) with 4”x4” drop TC1279-4DROP-4
Vertical Tees & Covers

Vertical Tees are used to drop cables vertically from
horizontal routes into frames or cabinets directly
underneath raceway.
Vertical Tees have cable dividers.
Retro Tees are supplied with a slit in the body to

permit entrance of existing cables without the need to
disconnect.
Part Numbers
Type Size (HxW) Drop Size (HxW) Body Part Number Cover Part Number
Vertical Tee 2”x2” (50mm x 50mm) 2”x2” TC1279-145A Supplied with Body
Vertical Tee 4”x4” (100mm x 100mm) 4”x4” TC1279-63 TC1279-64
Retro Tee 4”x4” (100mm x 100mm) 4”x4” TC1279-63R Supplied with Body
Retro Tee 4”x8” (100mm x 200mm) 4”x4” TC1279-111R Supplied with Body

Livermore, CA 94551 Fax (925) 447-7511

Joiners/Junctions
Joiners are used to connect two parts together, and slide
on to parts with no tooling or hardware required.
Joiners connect in seconds. 1/4 turn locks parts together.
Part Numbers
2”x2” (50mm x 50mm) TC1279-73
4”x4” (100mm x 100mm) TC1279-248A
4”x8” (100mm x 200mm) TC1279-250A
4”x12” (100mm x 300mm) TC1279-287A
Lightpaths to ADC Adapter kits

Adapters and Reducers are used to connect parts of
different sizes or brands.
Part Numbers
100mm x 100mm to 100mm x 200mm 4” x 4” - 4” x 8” left TC1279-07A
100mm x 100mm to 100mm x 200mm 4” x 4” - 4” x 8” right TC1279-05A
100mm x 200mm to 100mm x 300mm 4” x 8” - 4” x 12” TC1279-281A
100mm x 100mm to ADC 4” straight 4” x 4” - ADC 4” TC1279-109KIT
100mm x 100mm to ADC 4” horizontal tee 4” x 4” - ADC 4” TC1279-173KIT
100mm x 200mm to ADC 6” horizontal tee 4” x 8” - ADC 6” TC1279-175KIT

Livermore, CA 94551 Fax (925) 447-7511

Storage Spools
Storage Spools are used to store excess cable slack up in the ducting
system where it is safe from mishandling and potential damage.
In-line Spools can be placed within or at the end of a horizontal run.
Spools are ideal for under-floor slack cable storage in data centers.
Part Numbers
2”x2” (50mm x 50mm) TC1279-209KIT (in-line)
4”x8” (100mm x 200mm) TC1279-314-K (under floor)
4”x12” (100mm x 300mm) TC1279-315-K (under floor)
Mounting Hardware
Mounting Hardware is available for
virtually any kind of installation. Kits
are available for mounting to ladder
racking, threaded rod, wall mounting,
and under floor pedestal mounting.
Under Floor Mount Trapeze Mount Ladder Rack Mount Threaded Rod Mount
Part Numbers
Size (HxW) Mounting Kit Style Part Number
2”x2” (50mm x 50mm) Ladder Rack TC1279-203KIT
2”x2” (50mm x 50mm) Cabinet Mount TC1279-168KIT
2”x2” (50mm x 50mm) Wall Mount TC1279-168KIT
4”x4” (100mm x 100mm) Threaded Rod 1/2 inch existing TC1279-105KITC-1
4”x4” (100mm x 100mm) Threaded Rod 5/8 inch existing TC1279-105KITD-1
4”x4” (100mm x 100mm) Under Floor Pedestal Mount TC1279-197KITA
4”x4” (100mm x 100mm) Wall Mount TC1279-14 -104KIT
4”x8” (100mm x 200mm) Threaded Rod 1/2 inch existing TC1279-105KITC-2
4”x8” (100mm x 200mm) Threaded Rod 5/8 inch existing TC1279-105KITD-2
4”x8” (100mm x 200mm) Under Floor Pedestal Mount TC1279-197KITA
4”x8” (100mm x 200mm) Wall Mount TC1279-133KIT
4”x12” (50mm x 300mm) Trapeze Kit Threaded Rod 1/2 inch existing TC1279-297BKIT
4”x12” (50mm x 300mm) Trapeze Kit Threaded Rod 5/8 inch existing TC1279-297DKIT

Livermore, CA 94551 Fax (925) 447-7511
Cable Storage Ring

ARIA’s Cable Storage Ring provides mechanical support
and protection for cable service loops.
This 12” diameter ring is designed for inside plant fiber

optic cable and copper cable.
This product can be used in intermediate distribution

frames, main distribution frames, and telecommunications
closets.
For double the capacity, install two storage rings side by

side and route the cable in a figure eight pattern.
Eliminates rework from moves and changes to terminal

locations and layouts.
Features
• Six removable, adjustable Velcro® loops contain and secure cable
• The Velcro® loops allow conformance to copper and fiber bend radius requirements and prevent physical damage to
the cable
• The Cable Storage Ring mounts to a wall using three screws
Specifications
Parameter Value
Capacity 25 feet of 2-fiber singlemode or multimode optical fiber
cable
Ring Material Black powdercoated steel
Dimensions 11.5” diameter, 1.9” wide
Mounting #8 x 3/4” screws (included)
Part Number
CBL-STG-RING

Livermore, CA 94551 Fax (925) 447-7511
Cable Identification Sleeves

ARIA Cable Identification Sleeves are plastic sleeves that
can be wrapped around simplex or duplex cables and
labeled to provide the location of the telecommunication
space that is associated with that cable.
It is recommended to install them on a straight section of

the cable at least two inches from the fiber boot.
They can be labeled in the following FS-AN format:

F = A number identifying the floor of the building
S = A letter identifying the building area
A = 1 or 2 characters identifying a single patch panel
N = 2-4 characters identifying the port on the patch panel
Features
• Quickly provide a larger no mess labeling surface on small fiber cables allowing legends to be clearly seen
• Sleeves fit securely and stay in place even when used with vertical cabling
• Sleeves are made of a flexible flame retardant PVC material with a wide temperature rating (-11° to 167° F)
• Available in yellow, aqua, orange, and white colors with 1” or 2” long labeling surfaces
• Compatible with simplex and duplex cables with diameters of 2mm or 3mm
• Follows the TIA/EIA-606-A standards for horizontal link identifier requirements
How to Apply the Sleeve and Label Color and Cable Type Options
Wrap the sleeve around the Wrap a vinyl label around

fiber optic cable the sleeve
Part Number
C I S- - - -
1 2 2 2 3 3 4 4 4
1 Color 2 Cable Diameter 3 Cable Type 4 Length

Y = Yellow 2MM = 2mm SX = Simplex 1IN = 1 Inch
O = Orange 3MM = 3mm DX = Duplex 2IN = 2 Inch
W = White
A = Aqua

Livermore, CA 94551 Fax (925) 447-7511
Optical Transceivers DS-BS-1 04/12/2018
10Gbps 10km Range 1310nm SFP+ Optical Transceiver

ARIA’s 10Gbps 10km Range 1310nm SFP+ Optical Transceiver
is designed to transmit and receive optical data over single mode
optical fiber with a link length of up to 10km.
The transceiver module is comprised of a transmitter with

1310nm uncooled DFB laser and receiver with a PIN photodiode.
The SFP+ 10km module electrical interface is compliant to SFI

electrical specifications.
The module provides differential termination and reduces

differential to common mode conversion for quality signal
termination and low EMI.
Features
• Supports 1.25 Gb/s to 10.3 Gb/s bit rates More Information on www.ariatech.com
• Optical interface compliant to IEEE 802.3ae
• Electrical interface compliant to SFF-8431
• Hot Pluggable
• The transmitter input and receiver output impedance is 100Ω differential
• Data lines are internally AC coupled
• SFI typically operates over 200mm of improved FR4 material or up to about 150mm of standard FR4 with one
connector
• Applications for the module are 10GBASE-LR at 10.3125Gbps or other optical links
• 1310nm DFB transmitter, PIN photo-detector
• Operating case temperature: 0 to 70 °C
• Low power consumption
• Applicable for 10km SMF connections
• All-metal housing for superior EMI performance
• Advanced firmware allows customer system encryption information to be stored in the transceiver
• Cost effective SFP+ solution, enables higher port densities and greater bandwidth
• RoHS6 compliant (lead free)
Part Number Product Description
AT-10.3Gbps10km-LRC 1310nm, 10.3Gbps, SFP+ 10km, 0°C - +70°C

Livermore, CA 94551 Fax (925) 447-7511
10Gpbs 10km Range 1310nm XFP Optical Transceiver

ARIA’s 10Gbps 10km Range 1310nm XFP Optical
Transceiver is compliant with the 10G Small Form-Factor
Pluggable (XFP) Multi-Source Agreement (MSA) supporting
data-rates of 10.3125 Gbps (10GBASE-LR) or 9.953 Gbps
(10GBASE-LW), and transmission distance of up to 10km on
SMF.
The transceiver module is comprised of a transmitter with

1310nm uncooled DFB laser and receiver with a PIN
photodiode.
The transmitter and receiver are separate within a wide

o o
temperature range of 0 C to 70 C and offer optimum heat
dissipation and excellent electromagnetic shielding enabling
high port densities for 10G systems.
More Information on www.ariatech.com
Features
• Supports 9.95 Gb/s to 11.1 Gb/s bit rates
• Applications are 10GBASE-LR, 10GBASE-LW and other optical links
• Diagnostic performance monitoring of module temperature, supply voltages, laser bias current, transmit optical power
• Hot-pluggable XFP footprint
• Maximum link length of 10km with SMF
• 1310nm uncooled DFB laser
• XFP MSA package with duplex LC connector
• No reference clock required
• +1.8V, +3.3V Supply voltage
• XFI and lineside loopback mode supported
• Operating case temperature: -5°C to 70°C
AT-XFP10km-LRCE 1310nm DFG, 10Gbps,10km, 0°C - 70°C, Ethernet Version
AT-XFP10km-LRCKS 1310nm DFG, 10Gbps,10km, 0°C - 70°C, SDH Version

Livermore, CA 94551 Fax (925) 447-7511
10Gbps 10km Range SFP+ Optical Transceiver

This 1310 nm Distributed Feedback (DFB) 10Gbps 10km
Range SFP+ Optical Transceiver is designed to transmit
and receive optical data over singlemode optical fiber with
a link length of up to 10km.
The SFP+ 10km module electrical interface is compliant

to SFI electrical specifications.
The module provides differential termination and reduce

differential to common mode conversion for quality signal
More Information on www.ariatech.com

The transmitter input and receiver output impedance is 100 Ohms differential.
Data lines are internally AC coupled.
SFI typically operates over 200 mm of improved FR4 material or up to about 150mm of standard FR4 with one connector.
Applications for module are 10GBASE-LR at 10.3125Gbps or other optical links.
Features
• Optical interface compliant to IEEE 802.3ae 10GBASE-LR
• Hot Pluggable
• 1310nm DFB transmitter, PIN photo-detector
• Applicable for 10km SMF connection
• Advanced firmware allow customer system encryption information to be stored in transceiver
APP-31192-LRC 1310nm, 10Gbps, SFP+ 10km, 0°C ~ +70°C

Livermore, CA 94551 Fax (925) 447-7511
10Gbps 40km Range SFP+ CWDM Optical Transceiver

ARIA’s SFP+ER CWDM Transceiver is a “Limiting module”,
designed for 10GBASE-ER, and 2G/4G/ 8G/10G Fiber
Channel applications.
The transceiver consists of the transmitter and the receiver.

The transmitter section incorporates a colded EML
laser. The receiver section consists of a PIN photodiode
integrated with a TIA.
This module satisfies class I laser safety requirements.
Digital diagnostics functions are available via a 2-wire serial

interface, as specified in SFF-8472, which allows real-time
access to device operating parameters such as transceiver
temperature, laser bias current, transmitted optical power,
received optical power and transceiver supply voltage. More Information on www.ariatech.com
Features Features (Continued)

• Compliant with SFF-8431,SFF-8432 and IEE802.3ae • Diagnostic Performance Monitoring of module
temperature, supply voltages, laser bias current,
• 10GBASE-ER, and 2G/4G/ 8G/10G Fiber Channel
transmit optical power, receive optical power
applications.
• RoHS compliant and lead free
• Wavelength selectable to ITU-T standards covering
CWDM grid wavelengths
• Cooled EML transmitter and PIN receiver
Applications
• Low Power Dissipation 1.5W Maximum
• 10GBASE-ER
• -5ºC to 70ºC Operating Case Temperature
• 10G Fiber Channel
• Link length up to 40km
• CWDM Network
• Single 3.3V power supply
ATM-47192-04C 10Gbps, 1470nm SFP+ER 40km, -5ºC ~ +70ºC

Livermore, CA 94551 Fax (925) 447-7511
10Gbps 300m Range 850nm SFP+ Optical Transceiver

ARIA’s 10Gbps 300m Range 850nm SFP+ Optical
Transceiver is designed to transmit and receive optical data
over 50/125 μm or 62.5/125 μm multi mode optical fiber (see
table below).
The transceiver module is comprised of a transmitter with an

850nm VCSEL and receiver with a PIN photo detector.
The transmitter converts 10Gb/s serial PECL or CML electrical

data into serial optical data compliant with the 10GBASE-SR
standard.
The receiver converts 10Gb/s serial optical data into serial

PECL/CML electrical data.
The module provides differential termination and reduces

differential to common mode conversion for quality signal More Information on www.ariatech.com
Features
• Applications are: 10GBASE-SR at 10.3125Gbps,10GBASE-SW at 9.953Gbps and other optical links
• Optical interface compliant to IEEE 802.3ae
• Hot Pluggable
• Maximum link length of 300m on 2000MHz/km MMF
• Advanced firmware allows customer system encryption information to be stored in the transceiver
AT-10GBPS-300M-SRC 850nm,10Gbps,SFP + 300m, 0ºC - +70ºC

Livermore, CA 94551 Fax (925) 447-7511
QSFP+ Active Singlemode Fiber Optic Cables

ARIA QSFP+ Active Singlemode Fiber Optic Cables are
a high performance, low power consumption, long reach
interconnect solution supporting 40G Ethernet, fiber
channel and PCIe.
This product is compliant with QSFP MSA and 40GbE

PSM4 standards.
These cables are an assembly of 4 full-duplex lanes,

where each lane is capable of transmitting data at rates
up to 10Gb/s, providing an aggregated rate of 40Gb/s.

• Full duplex 4 channel 1310nm parallel active optical • 3.3V power supply voltage
cable
• RoHS 6 compliant
• Transmission data rates up to 11.3Gbit/s per channel
• SFF-8436 QSFP+ compliant
• Hot pluggable electrical interface
Applications
• Differential AC-coupled high speed data interface
• Infiniband Connectivity SDR/DDR/QDR
• 4 channels 1310nm FP array
• 10/40 Gigabit Ethernet
• 4 channels PIN photo detector array
• 2/4/8 Gbps Fiber Channel
• Maximum link length of 2km on G652 singlemode fiber
• Data Centers and Storage Arrays
• The housing is isolated from the connector ground
• Operating case temperature: 0°C to +70°C
• Maximum power consumption of 3.5W More Information on www.ariatech.com
Ordering information
ATM-SDO400-003C 40Gb/s QSFP PSM AOC up to 2km with 3 meter G652 singlemode fiber (SMF) cable length
ATM-SDO400-1000C 40Gb/s QSFP PSM AOC up to 2km with 1,000 meter G652 singlemode fiber (SMF) cable length
ATM-SDO400-2000C 40Gb/s QSFP PSM AOC up to 2km with 2,000 meter G652 singlemode fiber (SMF) cable length

Livermore, CA 94551 Fax (925) 447-7511
QSFP+ Active Multimode Fiber Optic Cables

ARIA QSFP+ Active Multimode Fiber Optic Cables are a
high performance, low power consumption, long reach
interconnect solution supporting 40G Ethernet, fiber
channel and PCIe.
This product is compliant with the QSFP MSA and IEEE

P802.3ba 40GBASE-SR4 standards.
These cables are an assemblyof 4 full-duplex lanes,

where each lane is capable of transmitting data at rates
up to 10Gb/s, providing an aggregated rate of 40Gb/s.

• Full duplex 4 channel 850nm parallel active optical • 3.3V power supply voltage
cable
• RoHS 6 compliant
• Transmission data rate up to 10.3Gbit/s per channel
• SFF-8436 QSFP+ compliant
• Hot pluggable electrical interface
Applications
• Differential AC-coupled high speed data interface
• Infiniband transmission at 4ch SDR, DDR and QDR
• 4 channels 850nm VCSEL array
• 40GBASE-SR4 40G Ethernet
• 4 channels PIN photo detector array
• Data Centers
• Maximum link length of 300m on OM3 Multimode Fiber
(MMF)and 400m on OM4 MMF
• Low power consumption <1.5W
• Operating case temperature 0°C to +70°C More Information on www.ariatech.com
Ordering information
ATQS-MDO400-003C 40Gb/s QSFP AOC up to 300m with 3 meter OM3 multimode fiber cable length

Livermore, CA 94551 Fax (925) 447-7511
Copper Products DS-BS-1 04/12/2018
Cat 5e and Cat 6 Patch Cords
Features
• Staggered plug design provides increased performance
• Injection molded boots for critical Cat 6 bend radius
requirements and sealing of the plug/cable interface
• “Flush” mold design allows booted patch cables to be
installed side by side in high-density patch fields
Flush style
• 50u short body plugs have minimal “de-twisting” of the
cable pairs during manufacturing
• 24AWG stranded or solid constructed cables are available
• PVC or plenum jackets are available
• Compliant with EIA/TIA Cat 6 specifications
• Available in Gray, Blue, White, Red, Black, Green, Yellow,
or Orange No boot style
Part Numbers
Cat 6 with Boots Cat 6 without Boots Cat 5e with Boots Cat 5e without Boots
C6-WB-GRY-XXF C6-GRY-XXF C5e-WB-GRY-XXF C5e-GRY-XXF
C6-WB-BLU-XXF C6-BLU-XXF C5e-WB-BLU-XXF C5e-BLU-XXF
C6-WB-WHT-XXF C6-WHT-XXF C5e-WB-WHT-XXF C5e-WHT-XXF
C6-WB-RED-XXF C6-RED-XXF C5e-WB-RED-XXF C5e-RED-XXF
C6-WB-BLK-XXF C6-BLK-XXF C5e-WB-BLK-XXF C5e-BLK-XXF
C6-WB-GRN-XXF C6-GRN-XXF C5e-WB-GRN-XXF C5e-GRN-XXF
C6-WB-YEL-XXF C6-YEL-XXF C5e-WB-YEL-XXF C5e-YEL-XXF
C6-WB-ORG-XXF C6-ORG-XXF C5e-WB-ORG-XXF C5e-ORG-XXF
Replace XX with desired length in feet

Livermore, CA 94551 Fax (925) 447-7511
LGX Adapter Plate for Keystone Jacks

ARIA’s LGX Adapter Plates for Keystone Jacks are
designed to fit in standard LGX type enclosures and
accommodates six snap-in keystone jacks for fast and
easy installation.
Choose from a variety of our keystone jacks to create the

perfect solution for a home or office network.
1RU RDR Rackmount Panel with CAT 6 Keystone Jacks 2RU RDR Rackmount Panel with CAT 6 Keystone Jacks
Supported Keystone Jacks
CAT 5E Keystone Jack CAT 6 Keystone Jack Singlemode LC Duplex Singlemode SC Simplex
Fiber Keystone Jack Fiber Keystone Jack
Part Number
L G XK J - - -
1 2 2 2 2 3 3
1 Number of Jacks 2 Keystone Jack Type 3 CAT 6 Keystone Jack Color

1 = 1 Keystone Jack CAT5 = CAT5E Keystone Jack Leave Blank for No CAT 6 Keystone Jack
2 = 2 Keystone Jacks CAT6 = CAT6 Keystone Jack
3 = 3 Keystone Jacks LCDX = Singlemode LC Duplex AL = Almond OR = Orange
4 = 4 Keystone Jacks Fiber Keystone Jack BK = Black WH = White
5 = 5 Keystone Jacks SCSX = Singlemode SC Simplex BL = Blue YL = Yellow
6 = 6 Keystone Jacks Fiber Keystone Jack GR = Green GY = Gray
IV = Ivory RD = Red

Livermore, CA 94551 Fax (925) 447-7511
SFP+ Passive Direct Attach Copper (DAC) Cables

ARIA SFP+ Passive Direct Attach Copper (DAC) cable
assemblies, also known as Twinax Cables, are high
performance, cost effective I/O solutions for 10G Ethernet
and 10G Fiber Channel applications.
They are hot-pluggable, industry-standard Small Form-

Factor Pluggable (SFP+) copper cables, available in
1 meter, 3 meter or 5 meter lengths.
SFP+ copper modules allow hardware manufactures to

achieve high port density, configurability and utilization at a
very low cost and reduced power budget.
These high speed cable assemblies meet and exceed

Gigabit Ethernet and Fiber Channel industry standard
requirements for performance and reliability.
They feature 10.5 Gpbs line speed, full duplex

performance and a bit error rate that is better than 10*10-12.
• Support for multi-gigabit data rates up to 10.5 Gbps • High capacity I/O in Storage Area Networks, Network
Attached Storage, and Storage Servers
• Data rates backward compatible to 1 Gbps
• Switched fabric I/O such as ultra high bandwidth
• Hot-pluggable SFP 20PIN footprint
switches and routers
• I/O Connector designed for high speed differential
• Data center cabling infrastructure
signal applications
• High density connections between networking
• Improved Pluggable Form Factor (IPF) compliant for
equipment
enhanced EMI/EMC performance
• Operating Temperature Range: 0~70 °C
• Storage Temperature Range: -40~85 °C
• Compatible with SFP+ MSA
• RoHS Compatible
Detailed View

Livermore, CA 94551 Fax (925) 447-7511
SFP+ Passive Direct Attach Copper (DAC) Cables

Serial Number Label on the Cable:
Pin Descriptions
Pin Logic Symbol Name/Description Notes
1 VeeT Transmitter Ground
2 LV-TTL-O TX_Fault N/A Signals not supported in SFP+ Copper
pulled-down to VeeT with 30K ohms resistor
3 LV-TTL-I TX_DIS Transmitter Disable Passive cable assemblies do not support
LOS and TX_DIS
4 LV-TTL-I/O SDA Tow Wire Serial Data
5 LV-TTL-I SCL Tow Wire Serial Clock
6 MOD_DEF0 Module present, connect to VeeT
7 LV-TTL-I RS0 N/A Signals not supported in SFP+ Copper
8 LV-TTL-O LOS LOS of Signal Passive cable assemblies do not support
LOS and TX_DIS
9 LV-TTL-I RS1 N/A Signals not supported in SFP+ Copper
10 VeeR Receiver Ground
12 CML-O RD- Receiver Data Inverted
13 CML-O RD+ Receiver Data Non-Inverted
15 VccR Receiver Supply 3.3 V
16 VccT Transmitter Supply 3.3 V
18 CML-I TD+ Transmitter Data Non-Inverted
19 CML-I TD- Transmitter Data Inverted
Part Number
SFP+SFP+-01M SFP+ Direct Attach Passive Cable (10GSFP+Cu), 1 meter, 30 AWG

Livermore, CA 94551 Fax (925) 447-7511
AT-1100 Series Media Converters
External Power Supply Configuration Internal Power Supply Configuration
Overview
The ARIA AT-1100 Series Media Converters connect copper and fiber optic networks together. Media Converters are
commonly used when the distance limit for copper cable (100m) is exceeded and fiber optic cable is needed because it is
capable of transmission over longer distances.
The AT-1100 comes equipped with a dual fiber SC adapter and RJ45 port.
The ARIA AT-1100 Series Media Converter interconverts electrical signals of 10Base-T and 100Base–TX twisted pairs
with optical signals of 100Base-FX.
The AT-1100 series media converter supports transmission in a singlemode or multimode dual fiber network configuration.
Features
• Electrical port and optical port link failure alert system.
• Auto-sensed 10/100Mbps configuration helps facilitates network upgrades.
• Built-in efficient switching core implements flow control and reduces broadcast packets.
• Auto-sensing of full-duplex and half-duplex communications systems.
• Auto-sensing of MDI/MDI-X facilitates system commissioning and installation.
• Supports half/full-duplex FX.
• Supports 10/100Mbps store-and-forward and 100Mbps cut-through transmission.
• Supports 100Base-FX or STM-1 transmission.
• Provides low latency data transmission.
• Supports the transmission of extra-long packets up to 1600 bytes in size.
• Extremely low power consumption (less than 2 Watts).
• Reliable and stable performance.

Livermore, CA 94551 Fax (925) 447-7511

Specifications
Parameter Value
Access mode 10/100Mbps
Standard IEEE802.3 10Base-T Ethernet, IEEE802.3u,100Base-TX/FX Fast Ethernet,
IEEE802.3x Flow Control
Wavelength 850nm/1310nm/1550nm
Transmission distance Dual-fiber Multimode: 2 km;
Dual-fiber Singlemode: 20/40 km;
Category-5 twisted pairs: 100m
Port One RJ45 port: Connecting STP/UTP category-5 twisted pairs, EIA568A/B
One optical port:
Multimode Dual-fiber: SC (50/125μm or 62.5/125μm)
Singlemode Dual-fiber: SC (9/125μm)
Conversion means Store and Forward mode or Cut-Through mode
Buffer space Built in 128Kb RAM for data buffer
Flow control Full duplex: flow control;
Half duplex: back pressure
BER <19-9
MTBF 100,000 hours
LED indicator POWER (power supply), FX LINK/ACT (optical link action)
FDX (full duplex), TX LINK/ACT (TP cable link/action)
TX 100 (TP cable rate 100M), FX100(fiber cable rate 100M)
Power supply AC90~264V input, 5V1A output
Power Consumption <2W
Operating temperature -10~55ºC
Operating humidity 5%~90%
Maintaining temperature -40~70ºC
Maintaining humidity 5% ~ 90% non-condensing
Dimensions 26 mm (H)x71mm (W)×94mm (D) (external power supply)
30 mm (H)x110mm (W)×140mm (D) (internal power supply)
Part Number Power Supply Fiber Type Link Length Adapter
AT-1100S-20 External Singlemode 20 kilometers SC
AT-1100 External Multimode 2 kilometers SC
AT-1100SI-20 Internal Singlemode 20 kilometers SC
AT-1100I Internal Multimode 2 kilometers SC

Livermore, CA 94551 Fax (925) 447-7511
Overview
The ARIA AT-2100 Series Media Converter interconverts electrical signals of 1000Base-T twisted pairs with optical signals
of 1000Base-SX/LX.
The AT-2100 series media converter supports transmission in a singlemode or multimode dual fiber network configuration.
Features
• Supports interconversion between 1000Base-T and 1000Base-SX/LX
• Supporting the transmission of extra-long VLAN packets.
• Supports Quality of Service (QoS) technology and ensures the transmission of VoIP packets.

Livermore, CA 94551 Fax (925) 447-7511

Specifications
Parameter Value
Access mode 1000Mbps Gigabit Ethernet
Standard IEEE802.3ab 1000Base-T , IEEE802.3z 1000Base-SX/LX Gigabit Ethernet
Wavelength 850nm/1310nm
Transmission distance Dual-fiber Multimode 62.5/125μm: 500 m;
Dual-fiber Multimode 50/125μm: 550 m;
Dual-fiber Singlemode: 20/40 km;
Port One RJ45 port: Connecting STP/UTP category-5 twisted pairs
One optical port:
Singlemode Dual-fiber: SC (9/125μm)
Conversion means Media conversion
BER <10-9
MTBF 100,000 hours
LED indicator POWER (power supply), FX LINK (optical link action),
TP LINK1000 (TP cable link1000M), TP LINK100 (TP cable link 100M),
TP ACT (TP cable packet forwarding action)
Power Consumption 5W
AT-2100 External Multimode 500 meters SC
AT-2100I Internal Multimode 500 meters SC

Livermore, CA 94551 Fax (925) 447-7511
Overview
The ARIA AT-3011 Series Media Converter interconverts electrical signals of 10Base-T/100Base-TX/1000Base-T twisted
pairs with optical signals of 1000Base-SX/LX.
The AT-3011 series media converter supports transmission in a multimode dual fiber network configuration.
Features
• Supports interconversion between 10/100/1000Base-T and 1000Base-SX/LX.
• Supporting the transmission of extra-long VLAN packets.
• Store-and-Forward mechanism.
• Supports Quality of Service (QoS) technology and ensures the transmission of VoIP packets.

Livermore, CA 94551 Fax (925) 447-7511

Specifications
Parameter Value
Access mode 10/100/1000Mbps Gigabit Ethernet
Standard IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX Fast Ethernet,
IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-SX/LX Gigabit Ethernet
Wavelength 850nm
Transmission distance Dual-fiber Multimode 62.5/125μm: 220 m;
Dual-fiber Multimode 50/125μm: 550 m;
Port One RJ45 port: Connecting STP/UTP category-5 twisted pairs , EIA568A/B
One optical port:
Conversion means Media conversion
BER <10-9
MTBF 100,000 hours
LED indicator POWER (power supply), FX LINK (optical link action),
TP LINK1000 (TP cable rate1000M), TP LINK100 (TP cable rate 100M)
TP ACT (TP cable packet forwarding action), FDX (TP full duplex operation)
Power Consumption 5W
AT-3011 External Multimode 550 meters SC
AT-3011I Internal Multimode 550 meters SC

Livermore, CA 94551 Fax (925) 447-7511
Resources DS-BS-1 04/12/2018
MTP® Polarity Management

This document outlines the wiring methods in the TIA-
LC Duplex
568-C.0 standard to achieve the proper polarity (each
Connector
transmit signal is connected to the correct receive port) in
fiber systems using MTP® connectors.
Pre-assembled and field-terminated MTP®-to-MTP®

connectorized optical cables called trunks are often used
in LANs and data center storage area networks (SANs).
Since there are MTP® Connectors on both ends of these

trunks and the end equipment typically has standard MTP®
duplex transceiver ports, the trunks are plugged into Connector
factory-made breakout furcations called modules
that transition from the MTP® Connector to a duplex
connector/adapter style.
MTP® Cable Polarity
MTP® polarity is determined by the cable wiring method and the key orientation. When mating an MTP® it is essential
to ensure the proper fiber positions are mated and male (pinned) connectors are mated with female (non-pinned)
connectors. Most MTP® connectors have a white dot on the same side of the connector as position 1.
Duplex Patch Cable Polarity
The most common duplex patch cable polarity type is A-to-B. MTP® and duplex patch cable polarity must be correctly
utilized in order to achieve proper signal transmission in an optical network utilizing MTP® connectors.

Livermore, CA 94551 Fax (925) 447-7511

Method A
Method A uses a single module type wired in a “straight-
through” configuration and two different patch cords in an
optical circuit.
One patch cord is straight wired and the other has a pair-
wise flip.
All components in the channel are mated key-up to key-

down.
No guidance is included in the standard to differentiate

where the patch cord with pair-wise flips should be
used and how it should be made so that it is easily
recognizable from the regular duplex patch cord “straight-
wired.”
Because polarity is addressed in the patch cords, the end-

user is ultimately responsible for managing it.
Method A Trunk Cable
Method A System
Note: This method requires A-to-A type patch cables on one end of the system.

Livermore, CA 94551 Fax (925) 447-7511

Method B
Method B uses a single module type wired in a straight-
through configuration and standard patch cords on both
ends. The differences are that all components in the
system are mated key-up to key-up.
When the link is configured in this fashion, physical

position #1 goes to physical position #12 on the other
end. A module on one end is inverted so logically (label-
wise) position #1 goes to position #1.
This method requires advanced planning for module

locations in order to identify the module types and location
of the inverted module in the optical link.
Using an MTP® Connector key-up to key-up configuration

does not easily accommodate angled polished (APC)
single-mode connectors.
Method B Trunk Cable
Method B System
Note: This method requires one of the cassette pairs to have reversed polarity and is not available for singlemode networks.

Livermore, CA 94551 Fax (925) 447-7511

Method C
Method C uses a pair-wise fiber flip in the trunk cable to
correct for polarity.
This enables the use of the same module type on both

ends of the channel and standard patch cords.
Because polarity is managed in the trunk, extending the

links requires planning of the number of trunks in order to
maintain polarity.
The TIA standard does not include text regarding the

ability to migrate to parallel optics for Method C, but
parallel optic capability can easily be achieved with a
special patch cord to reverse the pair-wise fiber flips in the
trunk.
Method C Trunk Cable
Method C System
Note: This method is only available when using a micro distribution trunk cable.

Livermore, CA 94551 Fax (925) 447-7511
NEMA and IP Ratings

The National Electrical Manufacturers Association
(NEMA) has defined standards for various grades of
enclosures that are rated to provide protection from
environmental conditions.
A NEMA rated enclosure provides protection against

environmental hazards such as water, dust, oil or
coolant or atmospheres containing corrosive agents.
Similar to NEMA ratings, the IP Code, International Protection Marking, International Electrotechnical Commission (IEC)
standard 60529, sometimes interpreted as Ingress Protection Marking, classifies and rates the degree of protection an
enclosure provides against intrusion (body parts such as hands and fingers), dust, accidental contact, and water.
NEMA IP NEMA Definition IP First Digit IP Second Digit

Rating Equiv- (Solid Particle (Liquid Ingress
alent Protection) Protection)
1 IP10 Enclosures constructed for indoor use to provide a degree 1 = Protected 0 = Not Protected
of protection to personnel against incidental contact with the against solid for-
enclosed equipment and to provide a degree of protection eign objects of
against falling dirt. 50mm in diame-
ter and greater
2 IP11 Enclosures constructed for indoor use to provide a degree 1 = Protected 1 = Protected
of protection to personnel against incidental contact with against solid for- against vertically
the enclosed equipment, to provide a degree of protection eign objects of falling water drops
against falling dirt, and to provide a degree of protection 50mm in diame-
against dripping and light splashing of liquids. ter and greater
3 IP54 Enclosures constructed for either indoor or outdoor use 5 = Protected 4 = Protected
to provide a degree of protection to personnel against against dust against water
incidental contact with the enclosed equipment; to provide - Limited to sprayed from
a degree of protection against falling dirt, rain, sleet, snow, ingress (no all directions -
and windblown dust; and that will undamaged by external harmful deposit) Limited to ingress
formation of ice. permitted.
3R IP14 Enclosures constructed for either indoor or outdoor use to 1 = Protected 4 = Protected
provide a degree of protection to personnel against incidental against vertically against water
contact with the enclosed equipment; to provide a degree of falling water sprayed from
protection against falling dirt, rain, sleet, and snow; and that drops all directions -
will be undamaged by external formation of ice. Limited to ingress
permitted.
3S IP54 Enclosures constructed for either indoor or outdoor use 5 = Protected 4 = Protected
to provide a degree of protection to personnel against against dust against water
incidental contact with the enclosed equipment; to provide - Limited to sprayed from
a degree of protection against falling dirt, rain, sleet, snow, ingress (no all directions -
and windblown dust; and in which the external mechanism(s) harmful deposit) Limited to ingress
remain operable when ice laden. permitted.

Livermore, CA 94551 Fax (925) 447-7511
NEMA and IP Ratings

NEMA IP NEMA Definition IP First Digit IP Second Digit
Rating Equiv- (Solid Particle (Liquid Ingress
alent Protection) Protection)
4 IP66 Enclosures constructed for either indoor or outdoor use to 6 = Totally 6 = Protected
provide a degree of protection to personnel against incidental protected against strong
contact with the enclosed equipment; to provide a degree of against dust jets of water from
protection against falling dirt, rain, sleet, snow, windblown all directions -
dust, splashing water, and hose-directed water; and that will Limited to ingress
be undamaged by the external formation of ice. permitted.
4X IP66 Enclosures constructed for either indoor or outdoor use to 6 = Totally 6 = Protected
provide a degree of protection to personnel against incidental protected against strong
contact with the enclosed equipment; to provide a degree of against dust jets of water from
protection against falling dirt, rain, sleet, snow, windblown all directions -
dust, splashing water, hose-directed water, and corrosion; Limited to ingress
and that will be undamaged by the external formation of ice. permitted.
of protection to personnel against incidental contact with against dust against direct
the enclosed equipment; to provide a degree of protection - Limited to sprays of water
against falling dirt; against settling airborne dust, lint, and ingress (no up to 15° from the
fibers; and to provide a degree of protection against dripping harmful deposit) vertical.
and light splashing of liquids.
6 IP67 Enclosures constructed for either indoor or outdoor use to 6 = Totally 7 = Protected
provide a degree of protection to personnel against incidental protected against the effects
contact with the enclosed equipment; to provide a degree against dust of temporary
of protection against falling dirt; against hose-directed immersion
water and the entry of water during occasional temporary between 15cm
submersion at a limited depth; and that will be undamaged and 1m. Duration
by the external formation of ice. of test 30 minutes.
6P IP67 Enclosures constructed for either indoor or outdoor use 6 = Totally 7 = Protected
to provide a degree of protection to the personnel against protected against the effects
incidental contact with the enclosed equipment; to provide a against dust of temporary
degree of protection against falling dirt; against hose-directed immersion
water and the entry of water during prolonged submersion at between 15cm
a limited depth; and that will be undamaged by the external and 1m. Duration
formation of ice. of test 30 minutes.
12 & IP52 Enclosures constructed (without knockouts) for indoor use to 5 = Protected 2 = Protected
12K provide a degree of protection to personnel against incidental against dust against direct
contact with the enclosed equipment; to provide a degree - Limited to sprays of water
of protection against falling dirt; against circulating dust, lint, ingress (no up to 15° from the
and fibers; and against dripping and light splashing of liquids. harmful deposit) vertical.
of protection to personnel against incidental contact with against dust against water
the enclosed equipment; to provide a degree of protection - Limited to sprayed from
against falling dirt; against circulating dust, lint, and fibers; ingress (no all directions -
and against the spraying, splashing, and seepage of water, harmful deposit) Limited to ingress
oil, and noncorrosive coolants. permitted.

Livermore, CA 94551 Fax (925) 447-7511

ARIA offers a full line of wallmount enclosures designed to
protect fiber optic connectivity in any environment.
These ARIA panels support ECAM (External Cable

Assembly Module) connectivity.
The ECAM connector features weatherproof connectivity

and supports simple product installation and re-entry.
Features
• No special tools required
ECAM shown installed
• Indoor and outdoor use
on the ARIA NEMA 8X
• Waterproof seal Wallmount Enclosure
using an ARIA ECAM
• Easy and quick plug and play type installation
Receptacle
• Rugged design
Supported Sizes
12 mm ECAM Connector 18 mm ECAM Connector
Product Design
ECAM installed on an ARIA NEMA 8X Wallmount Enclosure A cover plate is installed when an ECAM is not used

Livermore, CA 94551 Fax (925) 447-7511

ECAM Cable Entry Port Enclosure Compatibility
NEMA 4 Rated 4X Wallmount NEMA 4 Rated 8X Wallmount AWM 8 & AWM 12 Wallmount
Enclosure Enclosure Enclosure (12 mm ECAM only)
AWM 18 Wallmount Enclosure OSEC 4 Wallmount Enclosure (12 mm ECAM only)
OSEC 8 Wallmount Enclosure OSEC 12 Wallmount Enclosure

Livermore, CA 94551 Fax (925) 447-7511
Indoor Cable
Riser or Plenum Rated
Indoor tight buffered cables assure reliable broadband Color-Coded
Flame-Rated
performance, meet flame retardant safety codes, and Tight Buffer
Jacket
support easy field termination. Coating (900 µm)
This cable family packages 900μm tight buffered fibers into a

single flame retardant cable. This cable design is available in
both riser rated and plenum rated versions for deployment in
any indoor application. Optical Fibers Aramid Strength Yarns
The tight buffered distribution cable supports standard

installation practices and may be easily terminated using
established field connectorization methods.
Features
• 900μm tight buffered fibers are designed to support rapid field termination
• Industry standard color coding provides quick, error-free fiber identification
• Single-Unit designs provide space savings and cost advantages
• Subunit construction improves organization and termination practices
• Available with bend-insensitive singlemode and multimode optical fibers
• Flexible, flame-retardant, and color coded outer jacket
• Supports all high performance networks including OM4/10 Gigabit Ethernet systems
Fiber Information
Fiber Type Wavelength Attenuation Bandwidth 1 GbE 10 GbE
(nm) (dB/km) (MHz km) Distance Distance
(meters) (meters)
Singlemode 1310 / 1383 / 0.7/0.7/0.7 N/A N/A N/A
1550
Singlemode 1310 / 1383 / 0.7/0.7/0.7 N/A N/A N/A
Bend Insensitive 1550
Multimode 850/1300 3.5/1.0 200/500 300/550 33
(62.5μm)
Multimode 850/1300 3.5/1.5 500/500 550/550 82
(50μm)
Multimode OM3 850/1300 3.5/1.5 1500/500 1000/550 300
(50μm)
Multimode OM4 850/1300 3.5/1.5 3500/500 1100/550 550
(50μm)

Livermore, CA 94551 Fax (925) 447-7511
Indoor Cable
Riser Specifications
Fiber Count Diameter Cable Bend Radius Bend Radius Maximum Maximum
inches (mm) Weight Load No Load Installation Operation
lb/kft (kg/km) inches (cm) inches (cm) Load lbs Load lbs
(newtons) (newtons)
2 0.19 (4.8) 15 (22) 3.8 (9.7) 1.9 (4.9) 148 (660) 44.4 (198)
4 0.22 (5.6) 19 (28) 4.4 (11.2) 2.2 (5.6) 148 (660) 44.4 (198)
6 0.24 (6.0) 21 (31) 4.8 (12.2) 2.4 (6.1) 148 (660) 44.4 (198)
8 0.25 (6.2) 23 (34) 5.0 (12.7) 2.5 (6.4) 148 (660) 44.4 (198)
12 0.28 (7.0) 30 (45) 5.6 (14.3) 2.8 (7.2) 148 (660) 44.4 (198)
18 0.28 (7.0) 35 (51) 5.5 (14.0) 2.8 (7.0) 296 (1320) 88.8 (396)
24 0.32 (8.1) 43 (64) 6.4 (16.3) 3.2 (8.2) 296 (1320) 88.8 (396)
Plenum Specifications
Fiber Count Diameter Cable Bend Radius Bend Radius Maximum Maximum
inches (mm) Weight Load No Load Installation Operation
lb/kft (kg/km) inches (cm) inches (cm) Load lbs Load lbs
(newtons) (newtons)
2 0.16 (4.2) 9 (13) 3.2 (8.2) 1.6 (4.1) 98.9 (440) 29.6 (132)
4 0.17 (4.3) 14 (21) 3.4 (8.7) 1.7 (4.4) 98.9 (440) 29.6 (132)
6 0.18 (4.7) 15 (22) 3.6 (9.2) 1.8 (4.6) 98.9 (440) 29.6 (132)
8 0.20 (5.0) 18 (27) 4.0 (10.2) 2.0 (5.1) 98.9 (440) 29.6 (132)
12 0.23 (5.8) 22 (33) 4.6 (11.7) 2.3 (5.9) 98.9 (440) 29.6 (132)
18 0.26 (6.5) 32 (48) 5.1 (13.0) 2.6 (6.5) 148 (660) 44.4 (198)
24 0.30 (7.6) 42 (62) 6.0 (15.3) 3.0 (7.7) 148 (660) 44.4 (198)
Specifications
Applications: Versatile Indoor Flame-Rated Cable provides unsurpassed performance for intrabuilding applications that
require crossing floors in multi-level buildings or placement in air handling spaces
Constructions: Single-Unit (≤ 24f); Subunits (≥ 18f); Interlock Armor optional
Flame Ratings: Riser (OFNR / OFCR / FT4); Plenum (OFNP / OFCP / FT6)
Standards: ANSI/ICEA S-83-596, UL-1666, NFPA 262, CSA 22.2 No 230, Telcordia GR-409, RoHS Compliant
Temperatures: Shipping and Storage - Riser/Plenum: -40 °F to +176 °F (-40 °C to +80 °C)
Installation - Riser: +14 °F to +140 °F (-10 °C to +60 °C), Plenum: +32 °F to +140 °F (0 °C to +60 °C)
Operation - Riser: -4 °F to +176 °F (-20 °C to +80 °C), Plenum: +32 °F to +176 °F (0 °C to +80 °C)

Livermore, CA 94551 Fax (925) 447-7511
Indoor Cable
Interlocking Armor Plenum Rated
Overview
With a rugged, armored design delivering up to 10 to 13 times the crush resistance of standard fiber optic cable,
interlocking armor fiber cables are ideal for campus & building backbones, data centers and industrial applications.
Interlocking Armor Plenum fiber cables are not governed by fill ratios because they are UL listed as cable assemblies,
allowing a higher concentration of cables in an area compared to conduit. Because the cable is extremely durable and has
an indoor rating, Interlocking Armor Plenum is an excellent choice for campus environments.
Interlocking Armor Plenum fiber cables also provide outstanding flexibility for modifications, alterations and changes,
(MACs) as well as relocations, pathway changes or design modifications after the cable has been pulled, something
conduit cannot easily accommodate.
Protecting optical fiber cables with interlocking armor provides improved network reliability, flexibility and security. It
is a user-friendly, cost and space effective alternative to conduit or plenum innerduct. By installing Interlocking Armor
Plenum fiber cables instead of plenum innerduct or conduit, savings can run from 25-50% in materials, and reduce costly
installation time and labor costs by as much as 60%. This is a significant advantage over traditional installation methods.
Interlocking armor delivers superior crush and rodent resistance as well as security and is available in fiber counts of 6-24.
Specifications
Parameter Value
Type Step index singlemode or graded index multimode optical fiber with
protective UV cured acrylate coating
Coating Diameter 245 ± 10 μm
Buffer Jacket PVC - 900 ± 50 μm (0.0354 in) Outer Diameter (OD)
Configuration 12-24 tight buffer fibers are in a matrix of aramid strength members enclosed
under an inner jacket. Armor and a second jacket is applied
Armor Aluminum Interlock
Jacket Material, Inner & Outer Plenum Grade Thermoplastic
Jacket Color Orange for Multimode, Aqua for OM3, or Yellow for Singlemode
Cable Weight 129 kg/km (87 lb/1000 ft) (12 Fiber)
Cable Outer Diameter 13.3-15.3 mm (0.523-0.602 in) (12-24 Fiber)

Livermore, CA 94551 Fax (925) 447-7511
Indoor Cable
Interlocking Armor Plenum Rated
Description Singlemode Multimode Multimode Multimode Multimode
62.5 µm 50 µm OM3 50 µm OM4 50 µm
Cladding Diameter 125.0 ± 1.0 μm 125.0 ± 2.0 μm 125.0 ± 1.0 μm 125.0 ± 1.0 μm 125.0 ± 1.0 μm
Numerical Aperture 0.12 0.275 ± 0.015 0.200 ± 0.015 0.200 ± 0.015 0.200 ± 0.015
Maximum Attenuation @ N/A 3.5/1.0 3.5/1.5 3.0/1.0 3.0/1.0
850/1300 nm (dB/km)
Minimum Bandwidth @ N/A 200/500 500/500 2000/500 4700/500
850/1300 nm (MHz•km)
100 Mb Transmission > 5000 @ 1310 300/2000 300/2000 300/2000 300/2000
distance @ 850/1300 nm (m) nm
1 GbE Transmission > 5000 @ 1310 300/600 550/550 1000/600 1040/600
distance @ 850/1300 nm (m) nm
10 GbE Transmission > 10,000 @ 36/300 N/A 300/300 550/300
distance @ 850/1300 nm (m) 1310 nm
40/100 GbE Transmission 10k/40k @ N/A N/A 100 150
distance @ 850 nm (m) 1310 nm
Ratings
Flame Listing: Engineering Testing Laboratories (ETL) or Underwriters Laboratories (UL) Type OFNP (Nonconductive
Optical Fiber Plenum Cable) and c(ETL or UL) OFN-FT6 75C
Operating Temperature: -20°C to +75°C
Storage Temperature: -40°C to +85°C
Maximum Loading: Installation - 1335 N (300 lb) & Long Term - 400 N (90 lb).
Minimum Bend Radius: Installation 19.9 cm (7.8 in) & Long Term 13.3 cm (5.2 in).
Compression (crush) Strength: 440 N/cm per TIA/EIA FOTP-41.
Impact: 2 impacts at 5.88 N-m per TIA/EIA FOTP-25.
Cable Flex: 25 cycles per TIA/EIA FOTP-104.
Proof Test: 0.7 GPa (100 kpsi) per TIA/EIA FOTP-31
Applications Standards
IEEE 802.3ae 10GBASE-X (10 Gb/s) ISO/IEC 11801
IEEE 802.3 1000BASE-SX/LX (1 Gb/s) EN 50173
Fiber Channel FC-PH (1.062 Gb/s) Telcordia GR-409 & GR-20
IEEE 802.3 10BASE-F (10 Mb/s) ICEA S-104-696
IEEE 802.3 FOIRL (10 Mb/s) ANSI/ICEA S-87-640
FDDI (100 Mb/s) ETL, UL
ATM (155 Mb/s, 622 Mb/s, 1.2/2.4 Gb/s) OFNR/FT4, OFNP/FT6
ANSI/TIA/EIA-568-B.3

Livermore, CA 94551 Fax (925) 447-7511
Indoor/Outdoor Cable
Riser or Plenum Rated
Indoor/Outdoor Cable is composed of 2 to 24
colored tight buffers, water blocking aramid
Outer Jacket
yarn, and a UV resistant black PVC outer
jacket. All component materials meet the EU
RoHS and REACH Directive standards. Tight Buffer
Indoor/Outdoor Cable is UL Listed. OFNR/ Water Blocking Outer Jacket

OFNP jackets are available. Standard surface Aramid Yarn Water Blocking Aramid Yarn
print denotes construction, NEC rating, fiber Tight Buffer
type, and includes footage markers. Fiber
Optical Characteristics
Items Singlemode Multimode Multimode Multimode Multimode
62.5 µm 50 µm OM3 (50 µm) OM4 (50 µm)
Wavelength (1310/1550) nm (850/1300) nm (850/1300) nm (850/1300) nm (850/1300) nm
Max. Attenuation (0.5/0.4) dB/km (3.5/1.5) dB/km (3.5/1.5) dB/km (3.5/1.5) dB/km (3.5/1.5) dB/km
Bandwidth (EMB) N/A 220 MHz 850 MHz 2000 MHz 4700 MHz
(High @850nm @850nm @850nm @850nm
Performance)
Link Length N/A N/A 150 meters 300 meters 550 meters
(10Gb/ s)
Cable Characteristics
Parameter Value
Fiber Count 2, 4, 6, 8, 12, 24
Outer Jacket Material Flame Retardant PVC
Strength Member Aramid Yarn
Tight Buffer Material Flame Retardant PVC
Tight Buffer Color Available in 12 TIA/ EIA color standard
Nominal Outer Diameter of 2/4/6/8/12/24 fiber count (mm) 4.40 / 4.80 / 5.30 / 5.80 / 6.30 / 8.10
Weight (lbs/ km) of 2/4/6/8/12/24 fiber count - Riser 34 / 45 / 55 / 70 / 94 / 120
Weight (lbs/ km) of 2/4/6/8/12/24 fiber count - Plenum 40 / 52 / 64 / 87 / 115 / 140
Min Bend Radius, Install of 2/4/6/8/12/24 fiber count (cm) 6.6 / 7.2 / 7.95 / 8.7 / 9.45 / 12.15
Min Bend Radius, Operate of 2/4/6/8/12/24 fiber count (cm) 4.40 / 4.80 / 5.30 / 5.80 / 6.30 / 8.10
Application Riser or Duct
Riser/Plenum Flame Rating UL1666/ NFPA262
Storage/Operating Temperature -40 °C to +70 °C

Livermore, CA 94551 Fax (925) 447-7511
Indoor/Outdoor Cable
Riser Rated Central Tube
Flame Retardant Jacket

Water Blocking Strength Members
Gel-Filled Buffer Tube Containing up to 12 Fibers
Ripcord
Indoor/Outdoor Design
Parameter Value
• Provides additional mechanical protection Dynamic Bend Radius 20 x Cable OD
• Can be installed using typical loose tube cable Static Bend Radius 10 x Cable OD
methods and hardware Installation Load 1800 N (400 lbf)
Dry Water-Blocking Technology Tensile Rating
Residual Load 540 N (120 lbf)
• Permits rapid cable preparation and termination
Tensile Rating
• Water-blocking materials are easily removed Operating -40 to +70 °C
Flexible Buffer Tube Temperature Rating (-40 to +158 °F)
• Superior kink resistance Installation -30 to +60 °C

Temperature Rating (-22 to +140 °F)
• Increased flexibility Storage/Shipping -40 to +75 °C
• Facilitates route management in closure Temperature Rating (-40 to +167 °F)
• Eliminates need for closure transportation tubing Fiber Count 12
Buffer Tube O.D. 4.1 mm (0.16 in)
Available in Two Different Flame Ratings
Cable O.D. 8.5 mm (0.34 in)
• Riser rated design complies with UL 1666 and is
Cable Weight 68 kg/km (46 lbs/kft)
OFNR and OFN-FT4 rated
• Low-Smoke, Zero-Halogen design complies with UL
1685 and is OFN-LS and OFN-FT1 rated
All-Dielectric Construction
• Great for low fiber count applications where armor is
not permitted
• Easy access to cable core
• No metallic elements to bond or ground
Performance
• Tested in accordance with Telcordia GR-20, GR-409
and with relevant EIA/TIA-455 series FOTPs for fiber
optic cables

Livermore, CA 94551 Fax (925) 447-7511
Outdoor Cable
Non-Armored
Central Flexible Buffer
Polyethylene Outer Jacket Strength Tubes (2.5 mm)
Member Jacket
Polyethylene Inner Jacket (double jacket designs only)
(polyethylene)
Out er St rengt h Members (where applicable)
Dielectric Central Strength Member
Water Blocking Tape
Gel-Filled Buffer Tube Containing up to 12 Fibers
Ripcord
Strength Yarns
Optical Fibers
Dry Water-Blocking Technology
Parameter Value
• Permits rapid cable preparation and termination Fiber Count 2-24
• Water-Blocking materials are easily removed Buffer Tube OD (mm) 2.65
Flexible Buffer Tubes Single Jacket Cable OD (mm / in) 10.8 / 0.43
• Increased flexibility and superior kink resistance Single Jacket Cable Weight 82 / 55
(kg/km / lb/kft
• Facilitates route management in closures
Single Jacket Max Length (m / ft) 12,800 / 41,984
• Eliminates need for closure transportation tubes
Double Jacket Cable OD (mm / in) 13 / 0.51
Medium Density Polyethylene Jacket
Double Jacket Cable Weight 116 / 78
• Low friction installation (kg/km / lb/kft)
• Excellent protection from environmental hazards Double Jacket Max Length (m / ft) 12,800 / 41,984
Reverse Oscillated Lay Stranding Method Dynamic Bend Radius 20 x Cable OD
• Facilitates access to fibers Static Bend Radius 10 x Cable OD

Installation Tensile Rating (N / lbf) 2700 / 600
All-Dielectric Construction
Residual Tensile Rating 800 / 200
• No bonding or grounding required
Short Term / Long Term Crush 220/110 / 125/63
Performance Resistance (N/cm / lbf/in)
• Meets or exceeds the requirements of Telcordia GR- Operation Temp Rating (C) -40 to +70
20 and ICEA 640
Storage/Shipping Temp Rating (C) -40 to +75
• Tested in accordance with the relevant EIA/TIA-455
series FOTPs for fiber optic cables
• PE-90 compliant for applications that do not require
mid-span tube storage

Livermore, CA 94551 Fax (925) 447-7511
Outdoor Cable
Armored - Central Tube
Economical armored protection for lower fiber counts, ideal Armor (corrugated
Ripcord steel) Optional dual
for multi-purpose outdoor aerial and underground use near Water Blocking
the network edge. (swellable tape) armor, double jacket
Armored cable has an efficient design with a single central

loose tube. A better fit and cost-effective alternative for low
fiber count designs, this Central Loose Tube cable provides Central Buffer Tube
easy cable entry and flexible routing for multi-purpose Optical Fibers (3.0 mm gel-free) Jacket
installation of up to 12 fibers. (polyethylene)
Features
Easy Cable Entry & Preparation Flexible Routing and Termination
• Adhesive bond armor protects & improves mid-entry • Flexible buffer tubes and strength members
• Ripcord speeds cable entry & outer jacket removal • Small diameter & lightweight extends installation
lengths
• Proven water-blocking with dry core swellable binders
Temperature Rating
Meets the Following Standards
• Installation: -22 to +140 °F (-30 to +60 °C)
• ANSI / ICEA 640, IEC 60794-3-11, RUS 7 CFR 1755
(RUS LISTED), Telcordia GR20 • Operation: -40 to +158 °F (-40 to +70 °C)
Cable Specifications
Tube Fiber Count Diameter Cable Bend Radius Bend Radius Maximum
Construction inches (mm) Weight lb/kft Load inches No Load Installation
(kg/km) (cm) inches (cm) Load
Gel-Free 2 to 12 0.38 (9.7) 63 (94) 8 (20) 6 (15) 600 lbf (2670 N)
Fiber Information
Fiber Type Wavelength Attenuation Bandwidth 1 GbE 10 GbE
(nm) (dB/km) (MHz km) Distance Distance
(meters) (meters)
Singlemode 1310 / 1383 / 1550 0.35 / 0.35 / 0.25 N/A N/A N/A
Singlemode Bend Insensitive 1310 / 1383 / 1550 0.35 / 0.35 / 0.25 N/A N/A N/A
Multimode (62.5μm) 850/1300 3.5/1.0 200/500 300/550 33
Multimode (50μm) 850/1300 3.0/1.0 700/500 800/550 150
Multimode OM3 (50μm) 850/1300 3.0/1.0 1500/500 1000/550 300
Multimode OM4 (50μm) 850/1300 3.0/1.0 3500/500 1100/550 550

Livermore, CA 94551 Fax (925) 447-7511
Outdoor Cable
Armored - 12 Fiber Loose Tube
Colored Fiber and Water Blocking Yarn
PBT Loose Tube (Gel-Free)
Steel Armored Tape
Water Blocking Tape
MDPE Sheath (UV Resistant)
Water Blocking Yarn
FRP Strength Member
PP Filler (Natural)
Ripcord
Specifications
Parameter Specification
Attenuation (G657A1) @ 1310 nm ≤ 0.36 dB/km
Attenuation (G657A1) @ 1550 nm ≤ 0.22 dB/km
Long Term Tensile Strength (IEC60794-1) 300 N
Short Term Tensile Strength (IEC60794-1) 1000 N
Long Term Crush Resistance (IEC60794-1) 300 N/100mm
Short Term Crush Resistance (IEC60794-1) 1000 N/100mm
Fiber Color Blue, Orange, Green, Brown, Slate, White, Red, Black, Yellow,
Violet, Pink, Aqua
PBT Tube Color Blue
Ripcord Count 2
Operating Temperature -40C to +70C
Storage Temperature -40C to +70C
Static Bending Radius 10×Diameter
Dynamic Bending Radius 20×Diameter
Cable Diameter 12.0 mm
Cable Weight 125 kg/km
Sheath Thickness 1.5 mm

Livermore, CA 94551 Fax (925) 447-7511
Outdoor Cable
Non-Armored Alternative Jacket
Non-Armored Alternative Jacket is a patented polymer blend
that utilizes non-toxic, non-harmful, and environmentally
friendly food-grade additives to deter squirrels from chewing
on the jacket. The material is intended to make the act of
cutting their teeth back on cable an unpleasant experience
through the combination of taste and sensation.
System operators have traditionally installed a protective

barrier such as squirrel guard around the aerial plant or
endured the expense of moving the plant underground.
Both repairing the damage and the traditional methods
of preventing the damaged are costly and consume man
hours. To reduce the cost of protection and decrease repairs
utilize Non-Armored Alternative Jacket cable.
Overview
Non-Armored Alternative Jacket cable is suitable for direct buried, aerial and conduit applications. The construction
features the use of dry water blocking elements and reduced diameter buffer tubes, yielding a light weight, smaller cable.
The result is a fiber optic cable that is an ideal transmission medium for the outside plant environment.
The fiber and buffer tubes are color coded for easy identification. The all dry cable construction removes the need for
filling gels and flooding compounds from the cable. This significantly reduces cable preparation time and eliminates the
need for solvents and other consumables during cable preparation. These cables are designed to improve the cleanliness
of the work environment and provide full water blocking protection for outside plant applications.
Features
• Robust cable design
• Complies with applicable standards
• Provides very stable low temperature performance
• Cable withstands typical installation forces with a good safety margin
• Reduces installation loads due to the reduced weight and diameter
• Provides performance equivalent to gel-filled cable designs
• Improves network deployment speed for capturing revenues and starting services sooner
Standards/Compliance/Certifications
ANSI/ICEA S-87-640-2006
EN 187105
Telcordia GR-20-CORE Issue 3
RoHS 2011/65/EU
ISO 9001:2008

Livermore, CA 94551 Fax (925) 447-7511
Outdoor Cable
Non-Armored Alternative Jacket
Parameter Value
Cable Type Stranded loose tube
Construction Type Non-armored
Subunit Type Gel-free
Jacket Black Alternative jacket PE - UV Stabilized
Buffer Tube/Subunit Diameter 2.50 mm | 0.10 in
Cable Weight 66.0 kg/km | 45.0 lb/kft
Diameter Over Jacket 10.10 mm | 0.40 in
Minimum Bend Radius, loaded 15.2 cm | 6.0 in
Minimum Bend Radius, unloaded 10.1 cm | 4.0 in
Tensile Load, long term, maximum 800 N | 180 lbf
Tensile Load, short term, maximum 2700 N | 607 lbf
Tensile Load Test Method FOTP-33 | IEC 60794-1-2, Section 5
Vertical Rise, maximum 1234.0 m | 4048.0 ft
Environmental Space Aerial, lashed | Buried
Installation Temperature -30 °C to +70 °C (-22 °F to +158 °F)
Operating Temperature -40 °C to +70 °C (-40 °F to +158 °F)
Storage Temperature -40 °C to +75 °C (-40 °F to +167 °F)
Compression 22 N/mm | 125 lb/in
Compression Test Method FOTP-41 | IEC 60794-1-2, Section 7
Flex 35 cycles
Flex Test Method FOTP-24 | IEC 60794-1-2, Section 10
Impact 2.94 N-m | 2.17 ft lb
Impact Test Method FOTP-25 | IEC 60794-1-2, Section 8
Twist 10 cycles
Twist Test Method FOTP-85 | IEC 60794-1-2, Section 11
Water Penetration 24 h
Water Penetration Test Method FOTP-82 | IEC 60794-1-2, Section 24
Cable Freeze -2 °C | 28 °F
Cable Freeze Test Method FOTP-98
Heat Age -40 °C to +85 °C (-40 °F to +185 °F)
Low High Bend -30 °C to +60 °C (-22 °F to +140 °F)
Low High Bend Test Method FOTP-28 | IEC 60794-1-2, Section 28
Temperature Cycle -40 °C to +70 °C (-40 °F to +158 °F)
Temperature Cycle Test Method FOTP-3 | IEC 60794-1-2, Section 22

Livermore, CA 94551 Fax (925) 447-7511
Outdoor Cable
Ribbon Armored Central Tube
Water Blocking Tape

Ribbon Stack
Water-Blocking Tape (In tube)
Dry Water-Blocked Buffer Tube
Ripcord
MDPE Outer Jacket
Compact Design
Parameter Value
• Efficient packaging of fiber Dynamic Bend Radius 20 x Cable OD
• Lightweight and easy to handle during installation Static Bend Radius 10 x Cable OD
Easily Removable Ribbon Matrix Installation Load 2700 N (700 lbf)
Tensile Rating
• Allows for ease of stripping and fiber breakout
Residual Load 800 N (180 lbf)
• Improves mid-span strippability Tensile Rating
Precision Ribbon Geometry Crush Resistance 220 N/cm (125 lbf/in)
Short Term
• Time and labor savings during fiber splicing
Crush Resistance 110 N/cm (63 lbf/in)
Flexible Buffer Tube Long Term
• Superior kink resistance Operating -40 to +70 °C
• Increased flexibility
Installation -30 to +60 °C
• Facilitates route management in closures Temperature Rating (-22 to +140 °F)
Dry Water-Blocking Technology Storage/Shipping -40 to +75 °C
• Buffer tube and core are completely dry—no gel
Fiber Count 12-48
• Permits rapid cable preparation and termination
Ribbon Count 1-4
• Water-blocking materials are easily removed Buffer Tube O.D. 6.2 mm (0.24 in)
Corrugated Steel Armor Cable O.D. 12.5 mm (0.50 in)
• Provides additional mechanical protection Cable Weight 152 kg/km (102 lbs/kft)
• Special coating reduces time and effort to remove

jacket
Performance
• Meets or exceeds the requirements of Telcordia
GR-20 & ICEA 640 and is tested in accordance with
relevant EIA/TIA-455 series FOTPs for fiber cables

Livermore, CA 94551 Fax (925) 447-7511
Outdoor Cable
Flat Drop Cable
Strength Member
Water-Blocking Material
MDPE Outer Jacket
Gel-Filled Buffer Tube (up to 12 Fibers)
Ripcord
Easy Access Design
Parameter Value
• Jacket can be easily opened with a knife and the included ripcords Dynamic Bend 150 mm (5.9”)
• Buffer tube is easily separated from the jacket and strength members Radius
Static Bend Radius 100 mm (3.9”)
All-Dielectric Messengers
Installation Load 1336 N (300 lbf)
• No bonding or grounding required Tensile Rating
• Flexible and kink resistant NESC Light Load 122 mm (400”)
District Span Rating
Dry Water-Blocking Technology
NESC Medium Load 76 mm (250”)
• Permits rapid cable preparation and termination District Span Rating
• Water-blocking materials are easily removed NESC Heavy Load 46 mm (150”)
Versatile Design District Span Rating
Operating -40 to +70 °C
• Small cross-section and high strength allow good aerial performance Temperature Rating (-40 to +158 °F)
• Can be pushed or pulled through duct Installation -30 to +60 °C
• Highly crush-resistant Temperature Rating (-22 to +140 °F)
Storage/Shipping -40 to +75 °C
Dual Strength Member Design Temperature Rating (-40 to +167 °F)
• More flexible than a single, all-dielectric rod of the same strength Buffer Tube O.D. 2.8 mm (0.11 in)
• Easier to handle and coil than other all-dielectric Figure-8 designs Cable Thickness 5.0 mm (0.20 in)
• A great alternative where steel strength members are not permissible Cable Width 8.5 mm (0.33 in)
Cable Weight 39 kg/km (26 lbs/kft)
Medium Density Polyethylene Jacket
Max. Cable Length 25,000 m (82,000 ft)
• Low friction installation
• Excellent protection from environmental hazards
Sheath Markings
• Provides positive identification and length verification
Performance
• RDUP listed (tested in accordance with PE-90)

Livermore, CA 94551 Fax (925) 447-7511
Connector Types
SC - Singlemode, Simplex SC - Singlemode, Duplex SC - Singlemode, 900 um SC/APC - Singlemode, Simplex
SC/APC - Singlemode, Duplex SC/APC - Singlemode, 900 um SC - Multimode, Simplex SC - Multimode, Duplex
SC - Multimode, 900 um LC - Singlemode, Simplex LC - Singlemode, Duplex LC - Singlemode, 900 um
LC/APC - Singlemode, Simplex LC/APC - Singlemode, Duplex LC/APC - Singlemode, 900 um LC - Multimode, Simplex
LC - Multimode, Duplex LC - Multimode, 900 um ST - Singlemode ST - Singlemode, 900 um
ST - Multimode ST - Multimode, 900 um FC - Singlemode FC - Singlemode, 900 um
FC/APC - Singlemode FC/APC - Singlemode, 900 um FC - Multimode FC - Multimode, 900 um
MTP-(M), Singlemode MTP-(F), Singlemode MTP-(M), Multimode MTP-(F), Multimode
E2000 APC MTRJ-(M), Multimode MTRJ-(F), Multimode

Livermore, CA 94551 Fax (925) 447-7511

ARIA Fiber Optic Product Catalog

Uploaded by

Copyright:

Available Formats

ARIA Fiber Optic Product Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ARIA Fiber Optic Product Catalog

Uploaded by

Copyright:

Available Formats

What products does ARIA Technologies offer?

What products does ARIA Technologies offer?

What standards do ARIA Technologies products conform to?

What standards do ARIA Technologies products conform to?

Fiber Optic Product Catalog

ARIA Technologies, a Woman Business

The USDA Rural Development has listed many

ARIA Technologies products are compliant

102 Wright Brothers Ave Phone (925) 447-7500

“Some of the most demanding end users such as

ARIA’s Manufacturing Standards

ARIA’s Quality Policy

ARIA’s Environmental Policy

102 Wright Brothers Ave Phone (925) 447-7500

Wallmount Enclosures Fiber Optic Cable Assemblies

102 Wright Brothers Ave Phone (925) 447-7500

Plug & Play and Splice Cassettes Optical Transceivers

Attenuators Copper Products

102 Wright Brothers Ave Phone (925) 447-7500

AWM Series Wallmount Enclosures

AWM 2 AWM 4 AWM 8 AWM 12 AWM 18

102 Wright Brothers Ave Phone (925) 447-7500

AWM Series Wallmount Enclosures

AWM 18 additional features: Strengthened

102 Wright Brothers Ave Phone (925) 447-7500

AWM Series Wallmount Enclosures

Small Compression Fitting Medium Compression Fitting

Large Compression Fitting Three Slot Flat Drop Compression Fitting

102 Wright Brothers Ave Phone (925) 447-7500

AWM Series Wallmount Enclosures

1 Enclosure 4 Adapter Type 7 Splice Trays

102 Wright Brothers Ave Phone (925) 447-7500

Tri-Panel Series Wallmount Enclosures

The compact and intuitive design requires less space

Tri-Panels are ideal for use when a compact, wall

102 Wright Brothers Ave Phone (925) 447-7500

Tri-Panel Series Wallmount Enclosures

102 Wright Brothers Ave Phone (925) 447-7500

Tri-Panel Series Wallmount Enclosures

Black Color Available

TRI-2X TRI-4X TRI-6X

102 Wright Brothers Ave Phone (925) 447-7500

Tri-Panel Series Wallmount Enclosures

1 Enclosure 4 Adapter Type 6 Fiber Type 9 Stub Cable Type

102 Wright Brothers Ave Phone (925) 447-7500

XWM-4X Wallmount Enclosure

The patch side door comes equipped with a padlock hasp

102 Wright Brothers Ave Phone (925) 447-7500

XWM-4X Wallmount Enclosure

1 Adapter Plate Type 4 Pigtail 7 Stub Cable Type

102 Wright Brothers Ave Phone (925) 447-7500

Compact Series Wallmount Enclosures

The enclosures also support 12 fiber MPO to LC

The compact enclosure sizes allow for minimal wall space

The enclosures provide cable entry grommets and

Features Splitter Support

102 Wright Brothers Ave Phone (925) 447-7500

Compact Series Wallmount Enclosures

Patch and Splice MPO Plug & Play Pre-Terminated

Patch and Splice MPO Plug & Play Pre-Terminated