Roof by Extrusion in Revit
Roof by Extrusion in Revit
Roof by Extrusion in Revit
EXAMPLE 1
3)Click the Ref. Plane & Name it From Start & End
Page 1 of 14
CREATING THE ROOF BY EXTRUSION
Page 2 of 14
6) Elevation West is displayed then switch to Level 1 where the Roof to be extruded.
Click OK
7) Revit now is in the Sketch mode & draw the profile using the Draw Pallette.
9) Assign Roof type in the Properties and Duplicate and edit the properties.
10) Click Finish mode
Page 3 of 14
11) Select all the drawing and filter.
Page 4 of 14
13) Attach Top Base – Select Roof as the Top Base
After attaching:
Page 5 of 14
CREATING CUTOUT IN THE ROOF
Page 6 of 14
17) Start creating Lines using Draw Palette
Finish
Page 7 of 14
EXAMPLE 2
Page 8 of 14
2) Make 2 Reference Line (Roof Start And Roof End)
Page 9 of 14
5) To Make a Sketch Go to Elevation View – West
Then open View
Page 10 of 14
8) Go to 3D View, Select All and Filter
Page 11 of 14
11) Click the Roof
12) CUTOUT
Goto Plan View(Level 3) to make a cut out.
Page 12 of 14
13) Click the Roof & Vertical Opening to make a cutout
14) Make a cuout using Draw Palette and Click Finish mode
Page 13 of 14
Page 14 of 14