Failure Liveimport1230122348
Failure Liveimport1230122348
Failure Liveimport1230122348
Modification Indication
SubNetwork ID NE ID LTE FDD
E-UTRAN
ID FDD
DLCell
Power
ID ControlMO
ID Description
A,D,M,Plong:[0~999999]
long:[0~999999999]
long:[0~1048575]
long:[0~999999999]
long:[0~999999999]
string:[0~512]
ffset BetweenPower
BCCHOffset
and Cell
Between
RS (P_A_BCCH)
Power
CCCHOffset
and (dB)
Cell
Between
RS (P_A_CCCH)
Power
PCCHOffset
and (dB)
Cell
Between
RS (P_A_PCCH)
MSG2 and (dB)
Cell RS (P_A_MSG2) (dB)
0:-6,1:-4.77,2:-3,3:-1.77,4:0,5:1,6:2,7:3;default:4
long:0:-6,1:-4.77,2:-3,3:-1.77,4:0,5:1,6:2,7:3;default:4
long:0:-6,1:-4.77,2:-3,3:-1.77,4:0,5:1,6:2,7:3;default:4
long:0:-6,1:-4.77,2:-3,3:-1.77,4:0,5:1,6:2,7:3;default:4
ansmission
wer_offset
[dB]
ives when
a PDSCH
+
the
using
P_A
UE
data
precoding
+receives
10log10(2)
transmission
aforPDSCH
[dB]
transmit
using
when
data
precoding
diversity
the
transmission
UE with
receives
for 4transmit
cell-specific
using
a PDSCH
diversity
precoding
antenna
data
with
for
transmission
4transmit
ports,
cell-specific
and
diversity
using
Rho_A
antenna
precoding
with
is equal
4ports,
cell-specific
to
forand
Delta_power_offset
transmit
Rho_A
antenna
diversity
is equal
ports
wi
to
+
ffset BetweenPower
DCCHOffset
and Cell
Between
RS (P_A_DCCH)
PDSCH and(dB)
Cell RS (P_A_DTCH) (dB)
0:-6,1:-4.77,2:-3,3:-1.77,4:0,5:1,6:2,7:3;default:4
long:0:-6,1:-4.77,2:-3,3:-1.77,4:0,5:1,6:2,7:3;default:4
mission
g for transmit
using precoding
diversity with
for 4transmit
cell-specific
diversity
antenna
with 4ports,
cell-specific
and Rho_A
antenna
is equal
ports,
to and
Delta_power_offset
Rho_A is equal to
+ P_A
Delta_power_offset
[dB] otherwise, where
+ P_
R-W-I R-W-I
4 4
4 4
4 4
elta_power_offset + P_A [dB] otherwise, where Delta_power_offset is 0 dB for all PDSCH transmission schemes except multi-u
ssion schemes except multi-user MIMO and P_A is a parameter provided by higher layers. Not necessarily valid in some cases
ecessarily valid in some cases, e.g. QPSK with no spatial multiplexing and without multi-user MIMO transmission mode. The pa
O transmission mode. The parameter is corresponding to the PDSCH data sourced from DCCH logical channel and its assignm
ogical channel and its assignment is through CCCH logical channel.
MODIND SubNetwork MEID ENBFunctionFDD ServiceDrx description
Modification Indication
SubNetwork ID NE ID LTE FDD ID Service DRX ID MO Description
A,D,M,P long:[0~999999]
long:[0~999999999]
long:[0~1048575]
long:[0~999999999]string:[0~512]
Label Number
UE of
Short
Service
DRXClass
Cycle Capacity Configuration
Long DRX
Indicator
Cycle (sf) Short DRX Cycle (sf)
:DRX Config
long:0:10,1:20,2:32,3:40,4:64,5:80,6:128,7:160,8:256,9:320,10:512,11:640,12:1024,13:1280,14:2048,15:2560;default:9
for UTRAN-TDD ANR,261:DRX
long:0:No,1:Yes;default:0
long:0:2,1:5,2:8,3:10,4:16,5:20,6:32,7:40,8:64,9:80,10:128,11:160,12:256,13:320,14:512,1
Config for GERAN ANR,262:DRX Config for CDMA2000 HRPD ANR,263:DRX Co
UE
e access
capacity
network
matching
Long by
DRXthe
corresponding
cycle
QCI Specifies
referencing
Short
DRX
the
DRX
node
configuration
periodic
cycle
specific
repetition
Specifies
parameters
parameters,
of
thethe
periodic
that
On
when
Duration
control
repetition
UE able
packet
followed
to
of support
the
forwarding
by
Ona Duration
short
possible
treatment
DRX,
followed
period
the
(e.g.
ucShortDrxCycIn
ofbyinactivity
scheduling
a possiblewe
p
,1:2,2:3,3:4,4:5,5:6,6:8,7:10,8:20,9:30,10:40,11:50,12:60,13:80,14:100,15:200,16:300,17:500,18:750,19:1280,20:1920,21:2560
g:0:1,1:2,2:3,3:4,4:5,5:6,6:8,7:10,8:20,9:30,10:40,11:50,12:60,13:80,14:100,15:200;default:8
long:[1~16];default:4 long:0:1,1:2,2:4,3:6,4:8,5:16,6:24,7:33;default:4
ofve
number
consecutive
PDCCH-subframe(s)
of consecutive
subframe(s)
PDCCH-subframe(s)
atSpecifies
the UE
beginning
shall
the maximum
follow
of a after
DRX
the number
Short
successfully
Cycle,
DRX
during
of consecutive
cycle
decoding
which the
aPDCCH-subframe(s)
UE
PDCCH
monitors
indicating
the PDCCH
an
forinitial
asinsoon
UL
PDCCH-subframes,
or
asDL
a DL
user
retransmiss
data tran
Modification Indication
SubNetwork ID NE ID LTE FDDE-UTRAN
ID E-UTRAN
FDD Cell ID
Cell Reselection
MO Description
ID
A,D,M,P long:[0~999999]
long:[0~999999999]
long:[0~1048575]
long:[0~999999999]
long:[0~999999999]
string:[0~512]
Primary Key Primary Key Primary Key Primary Key Primary Key R
M 2009 376207 376207 1 1 cellLocalId=11
M 2009 376207 376207 2 1 cellLocalId=21
M 2009 376207 376207 3 1 cellLocalId=31
userLabel selQrxLevMin qrxLevMinOfst
string:[0~128] long:[-140~-44];default:-120
long:[0~16];default:2
dicates
ired received
the offset
power
of the
level
minimum
of the
User
cell
required
Label
which satisfies
received the
power
condition
level ofofthe
being
cellselected
which satisfies
by UE Only
the condition
the measured
of being
received
selected
power
or res
le
hether Configure
DecisionSnonintrasearch
Threshold of Same/Lower
ParametersPriority
Lower RSRP
Threshold
Measurement
of Serving
Reselection
(dB)
Carrier
Priority
(dB) of Intra-Frequency Cell
long:0:False,1:True;default:1
long:[0~62];default:50 long:[0~62];default:6 long:[0~7];default:7
)wer
ySServingCell
choose
priority
not
If to
the
<perform
ThresholdServing_Low
value ismeasurements
True, S_nonintrasearch
The parameter
of
andinter-RAT
the SnonServingCell,x
indicates
is configured
frequencies
intra-frequency
toor
UE,
inter-frequencies
of and
a cell
cell
UE
ofreselection
judges
a lowerof
whether
priority
equal
priority
or
frequency
to lower
The
perform
less
priority
RAT
the
its value
measurements
or
if the
frequency
is,
quality
the lowe
of
is ogs
long:[-140~-44];default:-120
long:0:No,1:Yes;default:1long:[0~62];default:60 long:[0~7];default:1
cy
eived
asurement
reselection
measurement
powershould
timerUE
levelperiodically
of
beintra-frequency
shall
performed
reselect
according
if the
the
cell
quality
new
towhich
the
cell
of
period
satisfies
of
serving
EUTRAN
inicated
the
cellcondition
ifexceeds
by
thethe
new
parameter
of
S_Intrasearch,
intra-frequency
being reselected
Treselections
UEcell
may
byis UE
better
Ifchoose
the value
ranked
to not
isthan
True,
perform
the
S_intrasearch
serving
intra-freque
cell
Inter-Frequency
Measure Performance
Number Configuration
Equivalent
of The Frequency
Inter-Frequency
Band
Equivalent
Indicator
Frequency
8 Band Indicator 7
long:[0~16];default:0
long[16]:0:Normal,1:Reduced;default:0
long[16]:[0~5],[7~14],[17~28],[30~64];default:0
long[16]:[0~5],[7~14],[17~28],[30~64];default:0
increasedInter-Frequency
carrier monitoring
Number
E-UTRA, the reselection
Equivalent
performance
Frequency
forBand
Equivalent
different
Indicator
carriers
Frequency
8 mayBand
be configured
Indicator by
7 higher layers to
ong[16]:[0~5],[7~14],[17~28],[30~64];default:0
long[16]:[0~5],[7~14],[17~28],[30~64];default:0
long[16]:[0~5],[7~14],[17~28],[30~64];default:0
long[16]:[0~5],[7~14],[17~28],[30~64];default:0
ong[16]:[0~5],[7~14],[17~28],[30~64];default:0
long[16]:[0~5],[7~14],[17~28],[30~64];default:0
long[16]:[0~31];default:6
long[16]:[0~31];default:5
ServingCell
selection
Equivalent
criteria:
< ThresholdServing_LowQ
Frequency
(1) the SnonservingCell,x
Band
Equivalent
Indicator
Frequency
and
2 the
of aSnonServingCell,x
Band
cell ofIndicator
a higher 1
priority
of a cell
frequency
of a lower
is greater
prioritythan
frequency
InterThresholdX_HighQ
is greater than InterThre
during
10,8:-8,9:-6,10:-5,11:-4,12:-3,13:-2,14:-1,15:0,16:1,17:2,18:3,19:4,20:5,21:6,22:8,23:10,24:12,25:14,26:16,27:18,28:20,29:22,3
long[16]:[-34~-3];default:-19 long[16]:[0~7];default:7
long[16]:[0~62];default:10
he
sion
the
criteria
Rnminimum
for above
neighboring
The required
parameter
(2) SServingCell
cells
quality
indicates
in equeal
level
< inter-frequency
ThresholdServing_Low
inpriority
the cellinter-frequency,
in dBcell reselection
and
i.e.the
Rnpriority
SnonServingCell,x
=Qmeas,n
The less
- Qoffset
its value
of .For
a cell
is,inter-frequency:
the
of alower
lowerits
priority
priority
Qoffset
frequency
class
equals
is isto
ld for Reselecting
Time Scale
to Inter-Frequency
Factor forTime
Inter-Frequency
High
Scale
Priority
FactorCell
Reselection
for Inter-Frequency
(dB)
Switch for
in High-Speed
UsingReselection
Antenna Port
in 1Medium-Speed
for Inter-Frequency Cell Reselection
long[16]:[0~62];default:8
long[16]:0:0.25,1:0.5,2:0.75,3:1;default:1
long[16]:0:0.25,1:0.5,2:0.75,3:1;default:2
long[16]:0:No,1:Yes;default:1
on
yigh
cate
frequency
time
mobility
whether
applied
state.The
is all
greater
inthe
medium
neighboring
concerned
thanmobility
InterThresholdX_High
cells
mobility
state.The
usecontrol
Antenna
concerned
related
during
Port mobility
1parameter
afor
time
inter-frequency
interval
control
"auctRslInterEutra"
Treselection
related
cell
parameter
reselection
(2) is
more
multiplied
"auctRslInterEutra"
When
than 1set
with
second
to"auctReselInterSFH"
TRUE,
has
is multiplied
elapsed
the UE maysince
with
as
if
[0..6000] step
long[16]:[0~7];default:1
0.1,{freqBandInd==52}[0..6000]
long[16]:[-30~33];default:23
step long[16]:[-140~-44];default:-120
0.1,{freqBandInd==53}[0..6000] step 0.1,{freqBandInd==54}[0..6000] step 0
equency
of
w
edinter-frequency
Inter_Pmax
of inter-frequency
is used
cell is
which
for
better
the
carrier.It's
satisfies
inter-frequency
rankedrepresented
the
than
condition
theneighboring
serving
by
of EARFCN(E-UTRA
being
cellE-UTRA
according
reselected
cell
toby
reselection
Absolute
the
UEcell-ranking
It is Radio
aIfkey
Inter_Pmax
Frequency
parameter
criterion R
isof
during
Channel
absent,
S_nonServingCell,x
a the
time
Number),the
maximum
interval indica
relati
powe
whic
6]:[1~5],[7~14],[17~28],[30~64],[101~101];default:1
long[16]:[0~4294967295]long:[0~62];default:60 long:[0~62];default:50
ve/UE
onIntraSearchP-r9
re-selection
transmit)
(s-IntraSearchP-r9
andIEDL
in operating
SIB3). IfIE
the
band(BS
inStruct
serving
SIB3).data
transmit/UE
Ifcell
theindex
fulfils
serving
Srxlev
receive)
cell>fulfils
SnonIntraSearchP
for aSrxlev
E-UTRAN
> SIntraSearchP
carrier
and Squal
frequency.
and
> SnonIntraSearchQ,
Squal > SIntraSearchQ,
the UE
the
may
UE
long:0:Close,1:Open;default:1
long[8]:[0~5],[7~14],[17~28],[30~64];default:0
long[8]:[0~5],[7~14],[17~28],[30~64];default:0
long[8]:[0~5],[7~14],[17~28],[30~64];default:0
ong[8]:[0~5],[7~14],[17~28],[30~64];default:0
long[8]:[0~5],[7~14],[17~28],[30~64];default:0
long[8]:[0~5],[7~14],[17~28],[30~64];default:0
long[8]:[0~5],[7~14],[17~28],[30~64];default:0
ong[8]:[0~5],[7~14],[17~28],[30~64];default:0
long[8]:[0~4294967295]
R-W R-W
MODIND SubNetwork MEID ENBFunctionFDD
EUtranCellFDD description
Modification Indication
SubNetwork ID NE ID LTE FDD
E-UTRAN
ID FDD Cell
MO ID Description
A,D,M,P long:[0~999999]
long:[0~999999999]
long:[0~1048575]
long:[0~999999999]
string:[0~512]
of cell establishment.),SubNetwork
M:Modify(Effect
ID NE of parameters
ID refer to the RDN
User-Friendly
RDN second line),
Description P:Pass Generated by the System.
of Object,
string:[0~128] long:0:0,1:1,2:2,3:3;default:1
long:0:Close,1:Open;default:1
Switch
DM symbols
for GBR
containing
service controls
cell-specific
User
whether
RS
Label
isDRX
equal
forand
GBRis denoted
service isbyclosed
Rho_B.
or not.
The Ifcell-specific
the DRX Switch
ratio Rho_B
for GBR
/ Rho_A
serviceisisaccording
closed, dis
to
cellCapaLeveInd==1}[0],{cellCapaLeveInd==2}[1],{cellCapaLeveInd==3}[1],{cellCapaLeveInd==4}[1]
long:[0~28];default:28 long:[0~28];default:28long:[1~100];default:100
er not.
parameter
If the DRX
indicates
Switch
The the
parameter
forMaximum
NGBRindicates
service
MCS
The Value
parameter
isthe
closed,
Maximum
for Uplink
discontinuous
indicates
MCS
configured
the
Value
Maximum
reception
for
by Downlink
high(DRX)
RB
layer
number
configured
for
cancell
not
for. be
UE
byused
inhigh
Downlink
for
layer
a UE
for
configured
with
cell NGBR
. byservi
high
16:27,17:30,18:32,19:36,20:40,21:45,22:48,23:50,24:54,25:60,26:64,27:72,28:75,29:80,30:81,31:90,32:96,33:100;default:33
long:0:500,1:750,2:1280,3:1920,4:2560,5:5120,6:10240,7:Infinity;default:7
long:0:Auto-Adjusted,1:1,2:2,3:3,4:4;default:2
long:0:Close,1:Open;default:1
parameter
Maximum
as UL synchronized.
indicates
RB numbertheWhen
for
CFIUE
Value
non
in Uplink
UL
configured
synchronized,
configured
by high
by
thelayer
high
UE
Thisshall
layer
for
is cell
a use
switch
for. The
cell
thefor
.Random
CFIthe
Value
algorithm
Access
could applied
be
procedure
1, 2 ,for
3 or
coverage
to could
request
bebased
aconfigured
Timeredirect.
Alignmen
as au
ose-loop SM in TM4,10:TM6
long:0:PS
Intra-TransMode
Handover,1:Redirection;default:0
long:0:PS
Adaption,11:Fixed
Handover,1:CCO,2:Redirection;default:2
SFBC
long:0:1,1:2,2:4,3:8,4:Adaption;default:4
in TM6,12:Fixed RI=1 Closed-Loop SM In TM6,20:Fixe
long:0:MRC,1:IRC;default:1
long:0:Close,1:Open;default:1
long:[0~10];default:6
long:0:Close,1:Open;default:1
is parameter
TheNoise
isparameter
determined
MatrixisType
the
for delaying
switchThe
of release
admission
parameter
theof
is
user
QCI=1
thewhich
switch
and
isof
QCI=2
judged
DepthERAB.
RLF
ROHC.
by eNB,
If thewhen
switch
the
is user
"Close",the
configure
eNodeB
VOIP not
or video
suppos
long:0:Close,1:Open;default:0
When this switch is on, it means eNB supports configuration of the new CQI table with 256QAM.
R-W-I
1
1
1
MODIND SubNetwork MEID ENBFunctionFDD
The parameter
User-Friendly
indicates
RDN theDescription
transmit power
of Object,
everyGenerated
resource element
by the System.
of cell-specific reference signals of servered CP. The unit
A,D,M,P long:[0~999999]long:[0~999999999]long:[0~1048575]long:[0~999999999]
string:[0~512] long:0:Close,1:Open;default:0
long:0:Close,1:Open;default:1
long:0:Close,1:Open;default:1
-Friendly
The parameter
Description
indicates
of Object,
whether
Generated
or notby
to the
enable
System.
The
UE call
parameter
record ID
is the
transfering
switch
The parameter
of
in UE
handover
Category4
is the
process.
switch of UE Category5
Depth ROHC
The Switch
Switch
of X2 Self-Setup
SwitchTNL
for Inter-eNB
InteractiveRRC
Control
Reestablishment
The Switch of Temporary
Feature NBR KPI Report
long:0:Close,1:Open;default:1
long:0:Close,1:Open;default:1
long:0:Close,1:Open;default:1
long:0:Close,1:Open;default:0
or
Depth
esses
Inter-eNB
ROHC.
TNL requestment
RRC
If the
Reestablishment
switch
forisX2
"Close",the
self-setup.
feature,
eNodeB
Ifand
the is
indication
not
usedsupport
to is
Open/Close
Close,
depth
The switch
The
ROHC.
the
passive
controls
Inter-eNB
eNB
whether
RRC
doesn't
Reestablishment
temporary
process NBR
TNL requestment
report
feature
KPI
of the
foreNB
X2
Modification Indication
SubNetwork ID NE ID LTE FDDE-UTRAN
ID FDD Cell ID
Prach ID MO Description
A,D,M,P long:[0~999999]
long:[0~999999999]
long:[0~1048575]
long:[0~999999999]
long:[0~999999999]
string:[0~512]
Primary Key Primary Key Primary Key Primary Key Primary Key R
M 2009 376207 376207 1 1 cellLocalId=11
M 2009 376207 376207 2 1 cellLocalId=21
M 2009 376207 376207 3 1 cellLocalId=31
prachConfigIndex prachFreqOffset ncs raResponseWindowSize
Starting
PrachRB
Configuration
Number of Random
Index Cyclic
Access
Receiving
ShiftPreamble(Effective
Parameters
Search Window
Based when
on
for Logical
Random
Cell Reset)
Root
Access
Sequence
Preamble
(Ncs)
Response (ms)(Effective whe
ong:[0~29],[31~45],[47~59],[63~63];default:5
long:[0~94];default:0 long:[0~15];default:10
long:0:2,1:3,2:4,3:5,4:6,5:7,6:8,7:10;default:7
Preamble
cs)
H
used
isofalso
to
a root
determine
configured.
is transmitted,
Zadoff-Chu
theInfrequency
fact,
sequence
the the
UE shall
parameter
position
with
monitor
theused
logical
gives
the
forthe
PDCCH
index
PRACH.
access
RACH_ROOT_SEQUENCE,
inThe
the
opportunity
PRACH
TTI window
for
usesPRACH.
[RA_WINDOW_BEGIN-RA_WINDOW_END]
6 RB, from
The
where
larger
0 toRACH_ROOT_SEQUENCE
N_RB^UL-6.
the number of frame and is
subfra
for
bro
R
long:0:Adaptive,1:Manual;default:0
W_BEGIN-RA_WINDOW_END] for Random Access Response(s). The parameter indicates the monitor window size.
R-W-I
0
0
0
or window size.
MODIND SubNetwork MEID ENBFunctionFDDEUtranCellFDD PhyChannel
Modification Indication
SubNetwork ID NE ID LTE FDD IDE-UTRAN FDD Cell
Physical
ID Channel ID
A,D,M,P long:[0~999999]
long:[0~999999999]
long:[0~1048575]
long:[0~999999999]
long:[0~999999999]
Primary Key Primary Key Primary Key Primary Key Primary Key
M 2009 376207 376207 1 1
M 2009 376207 376207 2 1
M 2009 376207 376207 3 1
description pucchSemiAnNum
PUCCH Channel
MO Description
for ACK/NACK of Downlink SPS Scheduling(Effective when Cell Reset)
1}[0..1364] step
string:[0~512]
2,{pucchDeltaShf==2}[0..2047] step 1;default:{pucchDeltaShf==0}[12],{pucchDeltaShf==1}[12],{pucchDeltaShf
er
y Description
of PUCCH Channel
of Object,for
Generated
ACK/NACKby of
theDownlink
System.SPS Scheduling in one subframe
R R-W-I
cellLocalId=11 0
cellLocalId=21 0
cellLocalId=31 0
aShf==1}[12],{pucchDeltaShf==2}[12]
MODIND SubNetwork MEID ENBFunctionFDD Paging
A,D,M,P long:[0~999999]long:[0~999999999]long:[0~1048575]long:[0~999999999]
long:0:4T,1:2T,2:T,3:1/2T,4:1/4T,5:1/8T,6:1/16T,7:1/32T;default:2
string:[0~512] long:0:32 Radio
long:0:0,1:1,2:2,3:4;default:0
Frames,1:64 Radio Frames,2:128 Radio Frames,3:256 Radio Frames;de
dly
S 36.304.
Description
ValueofWhen
in
Object,
multiples
The
UEGenerated
is
Parameter
of
in defaultPagingCycle
idle and
byisthe
DRX
Used
System.
istoused,
Decide
('T').
UEA How
will
valuemonitor
Many
of fourT
Times
P-RNTI
corresponds
canatbe
paging
Repeated
tooccasion
4 * defaultPagingCycle,
for Paging.
each DRX cycle.
a value
The parame
of two
MO Description
Measurement
RSRP
Configuration
Absolute Threshold
Index
RSRP Absolute
of Event Threshold
Decision (dBm)
2 of A5 Event Decision (dBm)
string:[0~512] long:[1~65535];default:1
long:[-140~-43];default:-75
long:[-140~-43];default:-90
ng,
neighboring
ndly
-44
Description
corresponding
cell The
ofthe
Object,
principle
intra-RAT
to 96,Generated
and
of Measurement
actual
97 in protocol
by
value
the of
System.
Configuration
36331
event can
A5 threshold
notIndex
be gottenThe
2 corresponding
principletoofvalue
actualinvalue
protocol
of event
36331A4isthreshold
-140 correspo
corre
Time to Trigger
s,7:256ms,8:320ms,9:480ms,10:512ms,11:640ms,12:1024ms,13:1280ms,14:2560ms,15:5120ms;default:7
e to trigger, the event can be triggered and reported The larger the value is, the stricter the judgment is for the event to be trigge
R-W-I
8
8
8
8
8
8
8
is for the event to be triggered The parameter should be set according to the actual requirements Sometimes, if it is set too larg
Sometimes, if it is set too large, the quality of calls may decrease
MODIND SubNetwork MEID ENBFunctionFDD
AbsoluteUE
Decision
RAT Measurement
Threshold ofID
E-UTRAN Serving Cell for RSRP Measurement (dBm)
long:[0~999999999]
long:[-140~-43];default:-115
The parameter
RDN indicates the RSRP threshold 1 of event B2
Modification Indication
SubNetwork ID NE ID LTE FDD ID UE Timer ID MO Description
A,D,M,P long:[0~999999]
long:[0~999999999]
long:[0~1048575]
long:[0~999999999]string:[0~512]
or UE to Monitor
TimerRadio
for UE
Link
to Failure
Wait Timer
for(T310_UE)
RRC
for Connection
UE to
(ms)
Wait for
Response
RRC
TimerRe-Connection
for
(T300)
UE to(ms)
Wait for
Response
RRC Re-Connection
(T301) (ms) Request (T302) (s)
:0,1:50,2:100,3:200,4:500,5:1000,6:2000;default:6
long:0:100,1:200,2:300,3:400,4:600,5:1000,6:1500,7:2000;default:7
long:0:100,1:200,2:300,3:400,4:600,5:1000,6:1500,7:2000;default:7
long:[1~16];default:3
or
gering
fter
for
RRCConnectionReject;2.
RRCConnectionReestabilshmentRequest
UEthe
to wait
handover
for RRC
procedure
connection
celland
re-selection
request
upon initiating
retry
occurred;
message
after
the reception
connection
3.isUE
transmitted.When
NAS
ofre-establishment
layer
RRC terminated
connection
UE receives
RRC
procedure.
reject.
connection
the
When
RRCConnectionReestablishment
If security
UEestablishment
receives
is notRRC
activated:
procedure;W
connection
go to
50,1:100,2:150,3:200,4:500,5:1000,6:2000;default:6
long:0:5,1:10,2:20,3:30,4:60,5:120,6:180;default:0
long:0:1,1:2,2:3,3:4,4:6,5:8,6:10,7:20;default:4
long:0:1,1:2,2:3,3:4,4:5,5:6,6:8,7:10;default:0
AT
04.isIfvalid.
handover
When
The is
parameter
T320
successful,
expires,
indicates
UE
thewill
Cell
The
maximum
stop
re-selection
parameter
T304.number
If T304
indicates
priority
ofexpired,
consecutive
provided
maximum
UE will
by
"out-of-sync"
number
start
the idleModeMobilityControlInfo
T311
of consecutive
and
indications
perform"in-sync"
received
re-establishment
from
indications
or inherited
lower
onlayers.
received
the
from
'best
ano
frc
in,30:24min,31:28min,32:33min,33:38min,34:44min,35:50min,36:1hr,37:1hr30min,38:2hr,39:2hr30min,40:3hr,41:3hr30min,42:4
32:33min,33:38min,34:44min,35:50min,36:1hr,37:1hr30min,38:2hr,39:2hr30min,40:3hr,41:3hr30min,42:4hr,43:5hr,44:6hr,45:8h
R-W-I R-W-I
5 3
0:3hr,41:3hr30min,42:4hr,43:5hr,44:6hr,45:8hr,46:10hr,47:13hr,48:16hr,49:20hr,50:1day,51:1day12hr,52:2day,53:2day12hr,54:3
2hr,52:2day,53:2day12hr,54:3day,55:4day,56:5day,57:7day,58:10day,59:14day,60:19day,61:24day,62:30day,63:MoreThan30da
y,62:30day,63:MoreThan30day;default:12
MODIND SubNetwork MEID ENBFunctionFDD
EUtranCellFDD
PowerControlUL
Modification Indication
SubNetwork ID NE ID LTE FDD E-UTRAN
ID FDD UL
CellPower
ID Control ID
A,D,M,P long:[0~999999]
long:[0~999999999]
long:[0~1048575]
long:[0~999999999]
long:[0~999999999]
Primary Key Primary Key Primary Key Primary Key Primary Key
M 2009 376207 376207 1 1
M 2009 376207 376207 2 1
M 2009 376207 376207 3 1
description p0NominalPUSCH poNominalPUSCH1 alpha
er Required
Cell Nominal
MO
for Description
DataPower
Transmission
Requiredinfor
PUSCH
Data Transmission
Semi-Static
Path Loss
Scheduling
in PUSCH
Compensation
Authorization
DynamicFactor
Scheduling
Mode
for PUSCH
(dBm)
Authorization
Transmission
ModePower
(dBm)
string:[0~512]long:[-126~24];default:-75
long:[-126~24];default:-75
long:0:0,1:0.4,2:0.5,3:0.6,4:0.7,5:0.8,6:0.9,7:1.0;default:5
mi-Static
PUSCH
culate
ly Description
the
(re)transmissions
Scheduling
transmit
of Object,
power
Authorization
Generated
corresponding
of PUSCHMode.
by
and
the
It
to
isis
System.
aused
Used
dynamic
toas
compensate
ascheduled
Part to Calculate
the
grant.
cellThe
pathloss
PUSCH
parameter
Transmission
corresponding
is used to
Power
tocalculate
a semi-persistent
to Represent
the transmit
the
grant
power
Power
ando
minal
PUSCH
PowerPower
Used By
Offset
PUCCH
of UEPhysical
in Dynamic
Channel
Schedule
(dBm)or Semi-Static Scheduling (dB)
long:[-127~-96];default:-105
long:[-8~7];default:0
SCH
CH. And
(re)transmissions
it is used to calculate
corresponding
the transmit
to a dynamic
power forscheduled
PUCCH andgrant
embody
or semi-staticscheduled
the power difference
grant(common
among cells.initial value)
R-W-I R-W-I
-105 0
-105 0
-105 0
mon initial value)
MODIND SubNetwork MEID ENBFunctionFDD
condition according to the cell reselection criterion during a time interval indicated by TreselectionUTRAN
MODIND SubNetwork MEID ENBFunctionFDD
EUtranCellFDD
UtranReselectionFDD
Modification Indication
SubNetwork ID NE ID LTE FDD ID
E-UTRAN UTRAN
FDD CellFDD
ID Cell Reselection ID
A,D,M,P long:[0~999999]
long:[0~999999999]
long:[0~1048575]
long:[0~999999999]
long:[0~999999999]
Primary Key Primary Key Primary Key Primary Key Primary Key
M 2009 376207 376207 1 1
M 2009 376207 376207 2 1
M 2009 376207 376207 3 1
description userLabel utranFreqNum
R R-W R-W-I
cellLocalId=11 C_TDO207ML1_Universitas Klabat Manado011 3
cellLocalId=21 C_TDO207ML1_Universitas Klabat Manado031 3
cellLocalId=31 C_TDO207ML1_Universitas Klabat Manado021 3
utranRslPara_freqBandInd8
utranRslPara_freqBandInd7
utranRslPara_freqBandInd6
utranRslPara_freqBandInd5
long[16]:[0~86];default:0
long[16]:[0~86];default:0
long[16]:[0~86];default:0
long[16]:[0~86];default:0
long[16]:[0~86];default:0
long[16]:[0~86];default:0
long[16]:[0~86];default:0
long[16]:[0~86];default:0
long[16]:[0~31];default:3
long[16]:[0~31];default:5
long[16]:[-24~0];default:-18
long[16]:[-50~33];default:24
cting
UTRAN
frequency
Thetowards
parameter
FDD
Each
acell
higher
frequency
indicates
which
priority
satisfies
Mximum
of RAT/
E-UTRAN
thefrequency
TX
condition
power
and UTRAN,
than
level
of being
the
which
each
current
reselected
angroup
UE
serving
may
of
byGERAN
UE
use
frequency
Itwhen
is frequencies,
a key
accessing
Each
parameter
frequency
each
the cell
ofband
SnonServingCell,x
ofonE-UTRAN
class
RACHofutran_Pmax_FDD
CDMA2000
and UTRAN
whichHRP
isFDD
ne
long[16]:[0~62];default:10
long[16]:[0~62];default:8
long[16]:[-119~-25];default:-115
long[16]:[0~7];default:5
ondition
criteria:
above (2) of
(1)being
SServingCell
the SnonservingCell,x
reselected
< ThresholdServing_Low
by UE of
It is
a higher
a key parameter
priority
andUTRAN
the
of SnonServingCell,x
FDD cell is greater
UTRAN
which
of athan
lower
cell
is utran_ThreshX_High
necessary
reselection
priority UTRAN
topriority
calculate
FDD
_FDD
cell
for reselection
isduring
greater
a time
than
to
long[16]:[0~16383];default:0
long[16]:[0~4294967295]
long[32]:[0~31];default:5
long[32]:[0~31];default:3
long[16]:[0~86];default:0
long[16]:[0~86];default:0
long[16]:[0~86];default:0
long[16]:[0~86];default:0
long[16]:[0~86];default:0
long[16]:[0~86];default:0
long[16]:[0~86];default:0
long[16]:[0~86];default:0
Index
long[16]:[0~4294967295]
R-W
MODIND SubNetwork MEID ENBFunctionFDD
EUtranCellFDD
EUtranCellMeasurement
description
Modification Indication
SubNetwork ID NE ID LTE FDD E-UTRAN
ID FDD
Measurement
Cell ID Parameter
MO ID
Description
A,D,M,P long:[0~999999]
long:[0~999999999]
long:[0~1048575]
long:[0~999999999]
long:[1~9999] string:[0~512]
Primary Key Primary Key Primary Key Primary Key Primary Key R
M 2009 376207 376207 1 1 cellLocalId=11
M 2009 376207 376207 2 1 cellLocalId=21
M 2009 376207 376207 3 1 cellLocalId=31
intraFPeriodMeasSwitch
interFPeriodMeasSwitch pingPongHoSwitchratPriorityPara_ratPriority7
nable Intra-Frequency
Switch
Periodical
for Inter-Frequency
Measurement
Switch
Periodical
for Preventing
Measurement
the Ping-Pong
CDMA2000-1xRTT
Handover RAT Priority
long:0:Close,1:Open;default:0
long:0:Close,1:Open;default:0
long:0:Close,1:Open;default:1
long:[0~255];default:0
ning
riodical
themeasurement
switch,UE switch
shall
of start
intra
for inter-frequency
the
frequency
PingPong
or not.
timer
periodical
0 as
represents
performing
measurement
"close",1
handover
represents
CDMA2000-1xRTT
from A cell
"open".
to B cell.RAT
Before
Priority
the PingPong timer expir
long:[0~255];default:254
long:[0~255];default:255long:[0~4294967295] long:[-15~15];default:0
long:[-15~15];default:0long:[-15~15];default:0long:[-15~15];default:0long:[-15~15];default:0
long:[0~255];default:0 long:[0~255];default:0long:[0~255];default:100long:[0~4294967295]
-1xRTT TargetUTRAN-TDD
System of Connected
Target System
UTRAN-FDD
Ue forofCS
Connected
Fallback
Target Ue
System
for
GERAN
CS
of Fallback
Connected
Target System
Ue forofCS
Connected
Fallback Ue for CS Fallback
long:[0~255];default:0 long:[0~255];default:0long:[0~255];default:100long:[0~255];default:0
-1xRTT TargetUTRAN-TDD
System of Connected
Target System
UTRAN-FDD
Ue forofCS
Connected
Fallback
Target Ue
System
for
GERAN
CS
of Fallback
Connected
Target System
Ue forofCS
Connected
Fallback Ue for CS Fallback
long:[0~4294967295]
long:0:PS Handover,1:Redirection;default:1
long:0:PS Handover,1:CCO,2:Redirection;default:2
long:[0~1];default:1
AN.The
eofcorresponding
CS fallback
defaultStruct
to
Prority
system,
GERAN.The
data
configuration
value
indexdefault
of 1 indicates
is Prority
that PSthat
configuration
HOallowed.
> Redirection.When
As
is that
to the
PSsystem
HOthe> Lower
Redirection.When
configuration
priority Cofiguration
allows
theSRVCC,
Lower
is set
priority
eNodeb
on OMC,Higher
Cofiguration
will only beprio
isis
ue
em
allowed.
ofconfiguration
1 indicates
As to the
that
allows
system
allowed.
SRVCC,
configuration
As to
eNodeb
the system
allows
will only
SRVCC,
configuration
be issued
eNodeb
SRVCC
allows
will SRVCC,
only
measure
be issued
eNodeb
andStruct
trigger
SRVCC
willdata
only
the
measure
index
be
SRVCC.
issued
and
When
SRVCC
trigger
thethe
measure
configuration
SRVCC.andW t
d for Intra-Frequency/Inter-Frequency/Intersystem
Inter-Frequency
Measurement
Number(dBm)
PerQCI Inter-Freq Measure GrpID
long[16]:0:Normal,1:Reduced;default:0
long[16]:0:No,1:Yes;default:1
long[16]:0:Not Support,1:Support;default:0
long[16]:0:No,1:Yes;default:1
uencies.When
eased carrier When
monitoring
the frequency
the param
E-UTRA,
of supportInterFHO4QCI1
thisthe
parameter
reselection
is Yes,
performance
eNodeb
is zero,this
will
for
This
measure
frequency
different
parameter
this
carriers
interCarriFreq
is
frequency
themay
VOIP
be
when
is
ability
configured
notPSHO;
operator’s
of inter
by
otherwise,eNodeb
frequency
higher
expectation.
layers to be
wille
Inter Frequency
Ofn of Inter
ANRFrequency
Switch Priority
in Intra-LTE
of Inter
LoadFrequency
Balancing
in(dB)
Intra-LTE
E-UTRANLoad
Frequency
Balancing
Redirection Priority
10,8:-8,9:-6,10:-5,11:-4,12:-3,13:-2,14:-1,15:0,16:1,17:2,18:3,19:4,20:5,21:6,22:8,23:10,24:12,25:14,26:16,27:18,28:20,29:22,3
long[16]:0:Close,1:Open;default:0 long[16]:[0~255];default:255
long[16]:[0~255];default:0
ameter is target
lects the Yes ,the nbr
Thiscell
frequency in
array this
based Frequency
indicates
on thisA4 can
ofbe added
information.
This
Ofn array
every and
indicates
The
inter
value be removed
frequency.
priority
range of by inter
ofevery
each ANRfrequency.
function;
integer else it cannot
array member is frombe.
0 to 255. A higher v
0],12:-3,13:-2,14:-1,15:0,16:1,17:2,18:3,19:4,20:5,21:6,22:8,23:10,24:12,25:14,26:16,27:18,28:20,29:22,30:24;default:15
step 0.1,{freqBandInd==53}[0..6000] long[16]:[1~5],[7~14],[17~28],[30~64],[101~101];default:1
step
long[16]:0:1.4M(6RB),1:3M(15RB),2:5M(25RB),3:10M(50RB),4:15M(75RB),5:20M(100
0.1,{freqBandInd==54}[0..6000] step 0.1,{freqBandInd==55}[0..6000] step 0.1,{freq
his
cy offset,used
parameter is
toused
define
The to
parameter
the
configure
priority
isthe
of
allowed
handover
frequency
The measurement
parameter
toofspecific
intra-LTE
is band
bandwidth
frequency.
inter-frequency
indicator
forfor
each
each
neighbor
frequency.It
DL frequency.
cell.is configed to the max bandwidth of
GERAN
Index Frequency SRVCC
GERAN
Measurement
Frequency Indication
CSFB
GERANMeasurement
FrequencyIndication
PSHO Measurement Indication
long[16]:[0~4294967295]
long[16]:0:No,1:Yes;default:1
long[16]:0:No,1:Yes;default:1
long[16]:0:No,1:Yes;default:1
.When
ncies.When
surement
theindication
frequency
the
Struct
frequency
data
ofofPSHO
this
index
ofparameter
this
GERAN
parameter
frequencies.When
is Yes,
is eNodeb
Yes, eNodeb
willthe
measure
will
frequency
measure
this of
frequency?when
this
thisfrequency?when
parameter CSFB
is Yes,
SRVCC?;otherwise,?eNodeb
based
eNodeb
onwill
measuring?;otherwis
measure this freq
w
ng[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
ng[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
ng[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
ng[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
ng[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
ng[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
ng[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
Explicit ARFCN3 Explicit ARFCN2 Explicit ARFCN1 The First ARFCN Value
ng[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023],[65535~65535];default:65535
long[16]:[0~1023];default:0
long[16]:0:Close,1:Open;default:0
long[16]:[0~255];default:0
long[16]:[0~255];default:0
long[16]:[0~255];default:255
mation.
dicates
cy basedThe
whether
onvalue
thistoinformation.
range
perform
of each
ANR
Theon
integer
value
GERAN
array
range
frequencies.
member
of each
This parameter
integer
is from array
0 toindicates
255.
member
A higher
whether
is from
value
NCC
0 to
indicates
255.
monitor
A higher
aishigher
allowed
value
priority.
or
indicates
not,
The
bydefault
bitmap
a higher
va
w
1023] step
long[16]:[-15~15];default:0
1,{geranBand==3}[512..885]
long[16]:[0~31];default:0
step 1,{geranBand==4}[512..810]
long[16]:0:GSM900,1:EXT900,2:R-GSM,3:DCS1800,4:PCS1900,5:GSM850;def
step 1,{geranBand==5}[128..251] step 1;default:{ger
ARFCN.More
sed to configure
This parameter
specifically,
the offset
is used
the
value
This
IE
toparameter
indicates
of
configure
GERANtheis
the
inter-RAT
used
GERAN
detailed
to configure
frequency.
frequency
ARFCNthe
number
band
GERAN
inofcase
GERAN.
system
the ARFCN
measurement
value can
frequency.
concern either a DCS 180
long[16]:0:DCS1800,1:PCS1900;default:0
long[16]:[0~4294967295]long:[0~32];default:0
long[32]:0:No,1:Yes;default:1
nd
urement
in caseindication
the ARFCNof SRVCC
value can
UTRAN
concern
This
Struct
frequencies.When
parameter
either
data index
a DCS
is used
1800
the
to present
or
frequency
a PCS
the
1900
of
UTRAN
this
carrier
parameter
frequency
frequency.
is number.
Yes,
ForeNodeb
ARFCNwill
values
measure
not associate
this freq
long[32]:0:No,1:Yes;default:1
long[32]:0:No,1:Yes;default:1
long[32]:0:Close,1:Open;default:0
long[32]:[0~255];default:0
ects
,ncies.When
eNodeb
the target
willthe
measure
frequency
frequency
thisbased
of
frequency?when
thison
This
parameter
this
array
information.
indicates
CSFB
is Yes,based
eNodeb
The
whether
value
onwill
measuring?;otherwise,?eNodeb
torange
measure
perform
of each
ANR
this integer
frequency?when
on UTRAN
arrayfrequencies.
member
will
PSHO?;otherwise,?eNodeb
notismeasure
from 0 tothis
255.frequency?w
A higher
will
va
UTRAN
TheFrequency
FrequencyRedirection
Specific Offset
Priority
of The Neighbour
UTRAN
UTRAN
Frequency
Frequency
Band
for TDD
Indicator
(dB) for TDD DL Frequency
DD==3}[2570.8..2619.2]
long[32]:[0~255];default:0
step 0.2,{utranFreqBandIndTDD==4}[2300.8..2399.2]
long[32]:[-15~15];default:0 long[32]:0:a,1:b,2:c,3:d,4:e,5:f;default:0
step 0.2,{utranFreqBandIndTDD==5}[1880.8..1
e ofThis
eachparameter
integer array
is used
member
to configure
is fromthe
0 tooffset
255. value
A higher
UTRAN
of UTRAN
value
Frequency
indicates
inter-RAT
Band
for
a higher
frequency.
TDD
Indicator
priority.
for TDD
The DL
default
Frequency
value 0 means the corre
UTRAN Frequency
Band
for FDD
Indicator for FDD DL Frequency
Duplex Mode Index
2,2:3,3:4,4:5,5:6,6:7,7:8,8:9,9:10,10:11,11:12,12:13,13:14,14:19,16:20,15:21,17:22,18:25,19:26;default:0
nFreqBandInd==15}[1498.4..1508.4] step 0.1,{utranFreqBandInd==17}[3512.4..3587.6]
long[32]:0:FDD,1:TDD;default:0
long[32]:[0~4294967295]
step 0.1,{utranFreqBandInd==18}[1932
UTRAN Frequency
Band
for This
FDD
Indicator
parameter
for FDD
is used
DL Frequency
to determine UTRAN duplex
Struct
mode,
data
FDD
index
or TDD
MA Frequency SRVCC
CDMA
Measurement
Frequency Indication
CSFBCDMA
Measurement
FrequencyIndication
PSHO Measurement
CDMA Frequency
IndicationANR Indicator
long[32]:0:No,1:Yes;default:1
long[32]:0:No,1:Yes;default:1
long[32]:0:No,1:Yes;default:1
long[32]:0:No,1:Yes;default:0
ncy
f this
PSHO
ofparameter
this
CDMA
parameter
frequencies.When
is Yes,
is eNodeb
Yes, eNodeb
willthe
measure
will
frequency
measure
this of
frequency?when
this
thisfrequency?when
parameter
This arrayCSFB
isindicate
Yes,
SRVCC?;otherwise,?eNodeb
based
eNodeb
whether
onwill
measuring?;otherwise,?eNodeb
tomeasure
perform ANR
this frequency?when
on
willCDMA
not measure
frequencies
will
PSHO?;ot
this
not freq
mea
long[32]:[0~255];default:0
long[32]:[0~255];default:0
long[32]:[-15~15];default:0
long[32]:[0~2047];default:0
mation.
e of each
Theinteger
value array
rangemember
of each
This
integer
isparameter
fromThis
array
0 toparameter
255.
ismember
used
A higher
toisconfigure
used
from
value
0toto
indicates
configure
CDMA
255. Ainter-RAT
higher
athe
higher
ARFCN
value
priority.
frequency
indicates
valueThe
which
offset
default
a higher
value.
hasvalue
correspondence
priority.
0 means
The default
thetocorre
CDM
va
1:bc11,12:bc12,13:bc13,14:bc14,15:bc15,16:bc16,17:bc17,18:bc18-v9a0,19:bc19-v9a0,20:bc20-v9a0,21:bc21-v9a0;default:0
long[32]:0:1xRTT,1:HRPD;default:0
long[32]:[0~15];default:5
long[32]:0:Close,1:Open;default:0
meter
r is used
is
This
used
to parameter
configure
to This
configure
parameter
whether
is used
the to
searching
CDMA2000
is
determine
used to
window
band
configure
the CDMA
class.
of CDMA
searching
cell type
inter-system
the
is 1XRTT
neighbor
handover
or HRPD.
pilot frequency
measurement
window
is needed
size in or
CDMA
not. 0cell.
means sear
long:0:PS
:All Close,1:Only
long[32]:[0~4294967295]
HO,1:CCO,2:Redirection
ICIC Open,2:Only
long:0:PSbased
DLCOMP
HO,1:Redirection
on measurement,3:Blind
Open,3:ICIC
based
and
onDLCOMP
measurement,2:Blind
Redirection;default:3
Open,4:OnlyRedirection;default:1
ULCOMP Open,5:ICIC and ULCOMP O
Struct
Thisdata
parameter
The
index
Operation
indicates
Method
whether
The
of LTE
the
Operation
to
eNodeB
GERAN
Method
enableofthe
LTE
UEtotype
UTRAN
Judgement,bit 0 indicates ICIC,bit 1 indicate
Database error. The child attribute 'Inter Frequency ANR Self-Delete Switch(interFreqANRDelInd)' of the MO attribute 'Inter-Frequency Me
bute 'Inter-Frequency Measurement Configuration(eutranMeasParas)' must be set to a valid value.