BECHEM Avantin 361 is a water miscible coolant concentrate for cutting operations like drilling, broaching, finishing, and tool manufacture. It provides excellent surface qualities, corrosion protection, long tool life, good bio stability, and skin compatibility. The concentrate is a yellowish brown fluid with a mineral oil content of around 55%. It has a recommended service concentration of 5-8% for general cutting and 8-15% for demanding operations.
BECHEM Avantin 361 is a water miscible coolant concentrate for cutting operations like drilling, broaching, finishing, and tool manufacture. It provides excellent surface qualities, corrosion protection, long tool life, good bio stability, and skin compatibility. The concentrate is a yellowish brown fluid with a mineral oil content of around 55%. It has a recommended service concentration of 5-8% for general cutting and 8-15% for demanding operations.
BECHEM Avantin 361 is a water miscible coolant concentrate for cutting operations like drilling, broaching, finishing, and tool manufacture. It provides excellent surface qualities, corrosion protection, long tool life, good bio stability, and skin compatibility. The concentrate is a yellowish brown fluid with a mineral oil content of around 55%. It has a recommended service concentration of 5-8% for general cutting and 8-15% for demanding operations.
BECHEM Avantin 361 is a water miscible coolant concentrate for cutting operations like drilling, broaching, finishing, and tool manufacture. It provides excellent surface qualities, corrosion protection, long tool life, good bio stability, and skin compatibility. The concentrate is a yellowish brown fluid with a mineral oil content of around 55%. It has a recommended service concentration of 5-8% for general cutting and 8-15% for demanding operations.
Rev. 06_06.11.2014 Technical Product Information Part-No. 9902962
BECHEM Avantin 361
Water miscible coolant concentrate
Examples of Application ! General cutting operations ! Manufacture of system components in ! Deep drilling operations light metal construction Lubrication Solutions for ! Broaching and finishing ! All-round system for bearing Industry ! Motor and gear production production BECHEM develops, produces ! Tool manufacture ! Automotive and supplier industry and sells high-performance lubricants and process media all Material over the world. The product ! Aluminium materials ! Non-ferrous materials range covers the fields of ! Steel materials ! Titanium alloys special lubricants, lubricants for industry and lubricants for metal Properties working and forming technology. ! Excellent surface qualities ! Reduces wear at guide bars All product formulations are ! Very good corrosion protection ! High coolant life based on latest tribological ! Long tool life ! Very good wetting properties ! Good bio stability ! Good skin compatibility knowledge. ! For central and individual systems
CB-O-016 acc. to Kin. viscosity at 20 °C mm²/s 70 – 140 DIN 51562 CB-A-001acc. to Density at 20 °C g/cm³ 0,92 – 0,95 DIN 51757 Emulsion milky CB-A-025 acc. to pH value 5% 9,0 – 9,2 DIN 51369 CB-A-027 acc. to Corrosion protection 5% Note 1–1 DIN 51360-2 Factor Factor for determination of concentration 1,0 CB-A-016 (Refractometer value) Acid split 1,2 CB-A-023
Instructions for use
CARL BECHEM GMBH ! Recommended service concentration: Weststr. 120 general cutting operations: 5– 8% 58089 Hagen · Germany demanding cutting operations: 8 – 15 % Phone +49 2331 935-0 Fax +49 2331 935-1199 The above data correspond to latest technology, modifications reserved. This information is intended as a guide and bechem@bechem.de does not necessarily represent a marketing specification. In individual cases tests have to be carried out by the consumer. Further data upon request. www.bechem.com
