Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 131 views

    Powder Type F

    Uploaded by

    ferdlh9
    This technical data sheet summarizes information on a fine texture polyester powder coat called Type F 5904. The powder coat has a polyester resin base and is suitable for interior and exterior use. It is available in all RAL colors and provides very good weather resistance, gloss retention, adhesion to metallic substrates, and surface hardness.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Powder Type F

    Uploaded by

    ferdlh9
    131 views3 pages
    This technical data sheet summarizes information on a fine texture polyester powder coat called Type F 5904. The powder coat has a polyester resin base and is suitable for interior and exterior use. It is available in all RAL colors and provides very good weather resistance, gloss retention, adhesion to metallic substrates, and surface hardness.

    Original Description:

    technical

    Original Title

    powder type F

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This technical data sheet summarizes information on a fine texture polyester powder coat called Type F 5904. The powder coat has a polyester resin base and is suitable for interior and exterior use. It is available in all RAL colors and provides very good weather resistance, gloss retention, adhesion to metallic substrates, and surface hardness.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    131 views3 pages

    Powder Type F

    Uploaded by

    ferdlh9
    This technical data sheet summarizes information on a fine texture polyester powder coat called Type F 5904. The powder coat has a polyester resin base and is suitable for interior and exterior use. It is available in all RAL colors and provides very good weather resistance, gloss retention, adhesion to metallic substrates, and surface hardness.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Technical Data Sheet

    Merkblatt
    Fine Texture Powder Coat
    Type F 5904
    polyester quality for interior and exterior use

    Basis Field of application Accelerated weathering


    polyester resin Interior and exterior coatings QUV-A
    meeting the highest qualitative > 1.000 h (according to DIN EN
    and optical demands, e.g. ISO 11507)
    Colours
    all colours according to RAL lamps, automatic machines,
    boxes, cash boxes, printer for Impact test
    further colours available upon
    extract of account, car reverse: ≥ 20 ip
    request
    accessories, roof porter, switch direct: ≥ 40 ip
    cabinets etc. (according to ASTM D 2794-69)
    Gloss grade
    dull-matt to silk-glossy Technical data Labelling
    see current safety data sheet
    Properties Density
    - very good weather resistance 1,45 to 1,70 g/ml 1) 1) depending on colour
    - high gloss and colour stability (according to DIN ISO 8130-2) 2) In combination with suitable
    - very good adhesion on all primers (see coating sugges-
    common metallic substrates Theor. coverage tion), the values for salt spray
    - high surface hardness at good approx. 10,5 m²/kg 1) and condensation water tests
    mechanical parameters (with 80 µm) increase to > 1.000 h.
    - covers up uneven surfaces
    and substrate faults Grain distribution
    - after full curing / cross-linking, < 11 % < 10 µm
    the paint film is physiologically 35 - 50 % < 32 µm
    safe > 85 % < 90 µm
    (laser measuring instrument)

    Cross-hatch
    Gt 0 C (according to DIN EN
    ISO 2409)

    Erichsen cupping test


    ≥ 4 mm (according to DIN EN
    ISO 1520)

    Salt spray test


    > 250 h 2)
    (according to DIN 50021-SS)

    Condensation water test


    > 250 h 2) (according to DIN EN
    ISO 6270-2)

    5904 Date: 12.05.2009 Page 1 of 3


    Technical Data Sheet
    Coating recommendation Merkblatt
    Substrates 1) Prime coat 2) Top coat 3)

    Aluminium
    preferably yellow- or Zinc Prime Powder EP 5815
    green-chromated (dark-grey)
    (according to DIN 50939) 60 to 80 µm
    or chromium-free no-rinse
    pretreatment
    Industrial-Polyesterpowder 5904
    Steel 60 to 80 µm 4)
    preferably iron or zinc-
    phosphated Corro Protect EP 5816
    (light-grey)
    Cast iron 60 to 80 µm

    Galvanized steel
    etc.

    1) Generally, the substrate shall be free from grease, oil, separating and drawing agents as well as
    corrosion products and other impurities (that especially applies to the use of directly fired gasovens )
    and pretreated according to the corrosion protection requirements.
    2) In order to obtain an optimum adhesion in the case of a double-layer coating system in the powder
    area, the powder primer may only be precured. An object temperature of 110 - 130°C is recommen-
    ded for this at a holding time of 8 to 10 minutes. If the prime coat is fully cured, adhesion problems
    may occur.
    3) Or single layer, provided that substrate has been pretreated accordingly.
    4) depending on colour

    Process Application Corona application


    Generally, make sure the voltage:
    Compatibility substrate is grounded 70 to 100 kV
    Different batches or powder properly. The fluidizing, (in the case of first coat)
    coat qualities cannot always conveying and dosing air 40 to 50 KV
    be mixed / are not always must be free from oil and (in the case of overcoating)
    compatible to one another. condensation water. In order
    Surface defects such as gloss to obtain a uniform coating Tribo application
    reduction, specks, crater, quality, a constant fresh / possible
    orange peel effect, etc., may recovered powder ratio
    result from incompatibility. To should be maintained. The Curing conditions
    be sure, appropriate tests recovery powder portion in duration: object temperature:
    shall be carried out before the circulation system should 10 min. at 180°C
    application. normally be less than 35 %.
    When processing metallic Packaging
    Application temperature powder coats, special 20 kg single cardboard box
    15 to 25 °C processing instructions must 500 kg cardboard box con-
    be followed. Also refer to taining 25 polyethylene bags
    Air humidity "Processing Instructions for á 20 kg
    < 75 % r. h. Brillux Metallic - Powder Further container sizes
    Coats". available upon request.

    5904 Date: 12.05.2009 Page 2 of 3


    Technisches Merkblatt
    Storage
    1 year after receipt.
    Store in closed container, dry
    and at room temperature (max.
    25 °C). Protect against heat and
    direct sun impact.

    Remark
    This Technical Data Sheet is
    based on intense development
    work and many years of prac-
    tical experience. The contents
    do not constitute any contractual
    relationship. The user/buyer is
    not released from its obligation
    to test our products for suitability
    for the intended application. In
    addition to that, our General
    Terms and Conditions shall
    apply.

    As soon as a new edition of this


    Technical Data Sheet is issued,
    the previous specifications will
    become invalid.
    If you need the current version,
    please consult your Brillux
    contact.
    Version 1

    Brillux Industrial Coatings


    Otto-Hahn-Str. 14
    59423 Unna
    Germany
    Phone +49 (0)2303 8805-0
    Fax +49 (0)2303 8805-119
    www.brillux.com
    industrialcoatings@brillux.com

    5904 Stand: 12.05.2009 Seite 3 von 3

    You might also like