Coding Manual
Coding Manual
Coding Manual
CODING MANUAL
TABLE OF CONTENTS
Page
SECTION 8. CODING MANUAL
TABLE OF FIGURES
8.1 Introduction
The following pages contain the coding structure to be used by coding personnel in the interpretation
and reduction to codes of the information sent to HSAC by the mine operators on Injury Report Form
7000-1.
The following is a detailed list of mining machines. The mining machine classification is reported by the
mining operator, analytically connected to source of injury when machinery is involved in an accident.
CODE DESCRIPTION
01 Aerial tram, tramway
02 Air compressor
03 Air transportation, planes, helicopter, etc.
04 Auger machine (coal) surface and underground
05 Bench grinder or lathe, drill press, magra shearers, key seater, band saw, etc. Large
shop-powered tools
06 Blow pipe or blow gun, air lance (air blasting)
07 Boats, barges and other water transportation
*
08 Bulldozer, dozer, crawler tractor, push cat, Komotose - pan - ranger - road scraper
637 - caterpillar 3305
09 Carriage-mounted drills on track, rail, or rubber-tired (Jumbo, air-track drill,
churndrill, rotary, jet piercing air-track compressor drill, quarry drill)
10 Chute
11 Classifier, cyclones
12 Continuous miner, tunnel borer, DOSCO - (bullit part of continuous miner)
13 Conveyor (include all types belts, pan, screw and other) belt feeder, mobile bridge
carrier, ROSCO
14 Crane, derrick - cherry picker, basket scaler, scaling machine, rock or dropball, boom
hoist - ranger, giraffe, scissor truck
* HD 41 Allis Chalmer
8-1
CODE DESCRIPTION
15 Crusher, breaker, mills (ball and rod)
16 Cutting machine, or mining only, chain cutter 15RU JOY
17 Dimension stone cutting and polishing machinery, all
60 Dragline - Big muskie (walking dragline) 4250W
18 Dredge
20 Electric, hydraulic drill, coal drills (not impact drills, see Rock drills)
21 Fan
23 Forklift - all forklift machines regardless of size, tow motor in mill, plant cat, hyster
25 Gathering arm loader, Conway loader, St. Joe loader, coal loading machine, 15BU
JOY Goodman, Jefferey
26 Grizzlies
29 Handtools (powered) (drill) - chipping hammer, jack spade, impact wrench, drive
ratchet - wheel lift, finger lift
8-2
CODE DESCRIPTION
34 Locomotive, (motor), rail-mounted (battery, steam, electric, tow-motor, air, etc.), lorry
car BECO BAHN operated on wire rope cable, Trammer, Mancha
40 Milling machinery (all other NEC) See 22, 39, 46, 69 for specific machines. Block
press
41 Mine car, timber truck, nipper truck (rail), all underground flat car, ASEA
42 Mine car, ore or coal car, boxcar, hopper car (rail only), all surface
43 Mucking machine, overshot loader
44 Ore haulage trucks - off highway trucks and underground trucks, all commodities -
young buggy, EUCLID, LECTRA HAUL - Usually associated with S-U 01, 02, 03
and 06
45 Pay loader ore haulage trucks - highway, all commodities - Usually associated with
mill
47 Pneumatic blasting agent loader, driller loader, coal popper, pop shooter, prill loader,
powder buggy
48 Pump
49 Raise borer
50 Raise climber – ALAMAK
51 Raw coal storage, tipple, dump bins
52 Roadgrader, motor grader, motor patrol
53 Rock drill (jackleg, airleg, drifter, stoper, buzzy, stringer, jackhammer, diamond drill;
see also Jumbo drill, track drill, [09]), hydraulic drill
8-3
CODE DESCRIPTION
59 Shortwall machine
62 Skip pocket
65 Track maintenance and repair equipment, rerailer, 335 track shifter, FROG
67 Trucks (nor ore haulage), pickups, water trucks, dump truck, service or utility trucks
(for ore haulage see 44 and 45).
69 Washers
8-4
8.3 Trade Names of Equipment
Following the names of some manufacturers are one or more examples or nicknames of their
equipment. The examples are not exhaustive; many other kinds of equipment may be manufactured.
Must be coded if mining machine is previously coded.
CODE MANUFACTURER
001 Abex
002 Acker
003 Acme
004 Advance Mining (coal augers)
005 Aerodyne
006 Allen-Sherman-Hoff
007 Allis-Chalmers Bulldozer & Fiat (tractor)
008 Alpine (continuous miner)
009 American Hoist (shovel excavators)
010 Atlas-Copco
011 Baldwin- Lima-Hamilton
012 Barber-Greene
013 Betti
014 Birdsboro
014 Black & Decker
015 Bucyrus-Erie (BE)
016 Buffalo-American
017 Case (tractor)
018 Caterpillar (cat) - DW 20
8-5
CODE MANUFACTURER
020 Chevrolet
022 Clark
023 Cline
025 Cushman
026 Dart
028 Deutz
029 Dorr-Oliver
030 Dravo
031 Eaton
032 Eickhoff
033 Eimco
034 Elkhorn
035 Emaco
036 Epling
041 Ford
042 Fuller
8-6
CODE MANUFACTURER
047 Goodman
048 Gorman-Rupp
049 Gradeall
052 Hewitt-Robins
054 Insley
056 Jeffrey-Dresser
057 Jold
059 Kenworth
061 Kobota
062 Koehring
063 Komatsu
064 Kress
8-7
CODE MANUFACTURER
069 Manitowoc
070 Marion
072 Massey-Furguson
073 McLanahan
074 Mescher
078 Myers-Whaley
079 Nagle
081 Nolan
083 Northwest
087 Page
088 Penndrill
8-8
CODE MANUFACTURER
089 Pioneer
090 Plymouth-Locomotor
091 Raygo
093 Ripco
095 Rosco
096 Royal
097 Salem
099 Schramm
100 Schroder
101 Stacy
102 Stamler
103 Symons
104 Telsmith
105 Terex
108 Wabco
109 Wagner
111 Westfalia
112 Westinghouse
8-9
CODE MANUFACTURER
113 White
114 Wilcox
115 Wilfley
116 Winter-weiss
117 Wirth
120 Unknown
8-10
8.4 All Mine Occupations
The following list is a compilation of all mine occupations. This coding structure is designed to take
the guesswork out of coding a worker correctly in order to place him in a correct location. Coding of
this category will be done exactly as is listed below. The computer will assign the correct leading
number code on the basis of location circled by the mine operator on the report form and the
occupation assigned by the coder. All occupations not covered by the following list will be coded
999.
Certain occupation codes can be coded to metal/nonmetal only. These codes are brought to the
attention of the coders with a preceding asterisk (*). DO NOT USE for coal injuries.
8-11
ALL MINE OCCUPATIONS - METAL/NONMETAL AND COAL
CODE DESCRIPTION
041 Advanceman - on section only
320 Aerial tram - outside only
*334 Air-track driller, M/NM - outside only
449 Assayers
430 Assistant mine foreman
430 Assistant mine manager
371 Auger helper, surface only
370 Auger operator, surface only
*778 Backhoe operator, M/NM UG
372 Barge attendant
261 Battery station operator
031 Beater, UG on section only
154 Belt cleaner, UG off section only
601 Beltman
201 Beltman rider
1012 Belt vulcanizer
392 Binman
807 Blaster
372 Boat operator
*825 Bobcat operator, M/NM
340 Boom operator
374 Boney preparation plant operator
962 Brakeman
032 Brattice man
035 Bridgeman
850 Buggy operator
8-12
CODE DESCRIPTION
277 Buggy pusher
368 Bulldozer operator, surface only
*768 Bulldozer operator, M/NM, UG only
616 Bullgang
749 Bullgang foreman
320 Cage attendant, surface only
920 Cager
373 Car dropper
*726 Car dump operator, M/NM, general, UG
394 Carpenter
334 Carriage mounted drill operator, surface only
*716 Cement man UG, M/NM
1055 Chainman
044 Chock operator
334 Churn driller, surface only
*045 Chute blaster, M/NM
269 Chute puller, M/NM, UG transportation, chute tapper
331 Claw operator, surface only
374 Cleaning plant operator, prep plant, mill, packaging, bagging, warehouseman
1013 Cleanup man
497 Clerk
1014 Coal sampler
262 Car runner, UG only
035 Col Mol helper
036 Col Mol operator
611 Communications man
035 Continuous miner helper, mole helper
8-13
CODE DESCRIPTION
036 Continuous miner operator, mole operator
*064 Contract miner, M/NM
601 Conveyor man
201 Conveyor rider
378 Crane operator, surface only
*778 Crane operator, M/NM, UG only
374 Crusher worker
037 Cutting machine helper
038 Cutting machine operator
*034 Diamond driller, M/NM, UG only
*399 Dimension stone cutter and polisher; M/NM
965 Dispatcher
378 Dragline operator
*778 Dragline operator, M/NM, UG only
372 Dredge operator
*058 Drift miner, M/NM
833 Drill helper
834 Drill operator
*034 Driller (longhole, prospect, diamond, exploration) M/NM underground only
*334 Driller (air track, churn, carriage mounted, jet piercing, rotary) M/NM surface only
383 Driller, highwall helper
384 Driller, highwall operator
1056 Driller, rock
276 Driver, jeep driver
379 Dryer operator, kiln operator
1022 Dump operator
414 Dust sampler
8-14
CODE DESCRIPTION
590 Education specialist
602 Electrician (code Master electrician as 402)
603 Electrician helper
456 Engineer (elec., vent., mng.)
*034 Exploration driller, M/NM, UG only
016 Faceman, on section, UG only
615 Fan attendant
380 Fine coal plant operator
462 Fireboss
397 Fireman
430 Foreman, assistant mine
749 Foreman (bullgang, labor, section) or shift boss
418 Foreman, maintenance
449 Foreman, mine
494 Foreman, mill or prep plant
489 Foreman, outside
*389 Forklift operator, M/NM
*782 Front-end loader operator, M/NM, UG only
382 Front-end loader, surface
043 Gathering arm loader operator
*728 Gizmo operator, M/NM
375 Grader operator, surface only
*775 Grader operator, M/NM, UG only
1018 Greaser
*726 Grizzlyman, M/NM
*726 Grizzly tender, M/NM
616 Groundman
8-15
CODE DESCRIPTION
396 Guard
716 Gunite man M/NM, UG
039 Hand loader
039 Hand trammer
*045 Hangup man, M/NM
040 Headgate operator
*768 Heavy equipment operator, surface only
368 Bulldozer operator, M/NM, UG only
382 Highlift operator
383 Highwall drill helper
384 Highwall drill operator
921 Hoist operator (hoister, engineer)
381 Hoist operator helper
397 Hook operator
464 Inspector
307 Jackhammer operator
041 Jacksetter (Longwall)
010 Jacksetter, on face, UG
276 Jeep driver
334 Jet piercing drill operator, M/NM, surface only
043 Joy loader operator
054 Kersey operator
379 Kiln operator
616 Laborer
749 Labor foreman
414 Laboratory technician
385 Lampman
8-16
CODE DESCRIPTION
*728 Load/haul/dump operator, M/NM (underground only)
240 Loader head operator
042 Loading machine helper
043 Loading machine operator
*034 Longhole driller, M/NM, UG only
041 Longwall helper
041 Longwall jacksetter
044 Longwall operator
1060 Machinist
418 Maintenance foreman
850 Mancar operator
608 Mason, (surface and underground)
402 Master electrician
404 Master mechanic
604 Mechanic (code master mechanic as 404), mill wright, boiler maker
605 Mechanic helper
374 Media operator
604 Mill wright
494 Mill foreman
374 Mill operator (stationary equipment)
449 Mine foreman
449 Mine manager
449 Mine owner
616 Miner, coal underground
*064 Miner, contract M/NM
*058 Miner, drift M/NM
*057 Miner, stope M/NM
8-17
CODE DESCRIPTION
*327 Miner, surface M/NM
*663 Miner, NEC, M/NM
591 Mineral industrial safety officer
592 Mine safety instructor
378 Mobile equipment operator
035 Mole helper
036 Mole operator
969 Motorman
041 Move-up man
*029 Mucking machine operator, M/NM
116 Mucking machine operator, coal, UG off section only
1018 Oiler
489 Outside foreman
382 Pan operator
382 Payloader operator
616 Pick-up man
046 Pinner
367 Pitman
044 Plow operator
807 Powder gang
807 Powderman
807 Powder monkey
494 Prep plant foreman
374 Prep plant operator
*767 Power shovel UG, M/NM
367 Power shovel operator
462 Pre-shift examiner
8-18
CODE DESCRIPTION
710 Propman
*034 Prospect driller, M/NM, UG only
157 Pumper, off section only
316 Pumper, above ground only
663 Quarry man, shaft miner
611 Radioman
397 Railroad clam operator
*059 Raise miner, M/NM
850 Ramcar operator
386 Refuse truck driver
604 Repairman
038 Ripper
875 Roadgrader operator
1056 Rock driller
706 Rock duster
046 Rock bolter
158 Rock machine operator, off section UG only
045 Rockman
1017 Rodman
046 Roof bolter
047 Roof bolter helper, rock bolter helper, pinner helper
048 Roof bolter mounted
262 Rope rider
240 Roscoe operator, UG transportation
387 Rotary bucket excavator operator
*334 Rotary drill operator, M/NM above ground only
*726 Rotary dump operator, M/NM
8-19
CODE DESCRIPTION
495 Safety Director
593 Safety representative
043 St. Joe shovel operator
1014 Sampler (see also Dust sampler)
388 Scalper-Screen operator
392 Skip dumper
930 Skip tender
054 Scoop car operator
*028 Scoop tram operator, M/NM
382 Scraper-loader operator
382 Scraper Rig operator
749 Section foreman
316 Service truck operator
044 Shear operator
749 Shift boss
807 Shooter
160 Shopman
706 Shotcrete man
807 Shot firer
367 Shovel operator
850 Shuttle car operator
390 Silo operator
*030 Slusher operator, M/NM
262 Snapper
051 Stall driver
*398 Stone finishing and sizing personnel, M/NM
*057 Stope miner, M/NM
8-20
CODE DESCRIPTION
708 Stopping builder
391 Stripping shovel operator
481 Superintendent
609 Supplyman
*327 Surface miner, M/NM
316 Surface worker
423 Surveyor
969 Swamper
969 Switchman
*316 Tamping machine operator, M/NM surface only
052 Tailgate operator
601 Tailpiece man
611 Telephone man
710 Timberman
497 Timekeeper
392 Tipple operator
392 Topman
392 Toplander
276 Tractor operator, UG
368 Tractor operator, surface
316 Track gang, surface only
216 Trackman
624 Trainee (code 224 UG transportation)
594 Training specialist
1023 Transit man
962 Trip rider
*001 Tripperman, M/NM, UG only
8-21
CODE DESCRIPTION
*776 Truck driver, M/NM, UG
376 Truck driver, above ground only
224 Underground transportation trainee
496 Union representative
054 Unitrac operator, UG on section only
999 Unknown
053 Utility man
708 Ventilation man
334 Wagon drill operator, M/NM, surface only
374 Warehouseman
392 Washery operator
396 Watchman
366 Waterboy
159 Water line man, UG, off section only
395 Water truck operator
393 Weighman
1019 Welder
*269 Whistle punk, M/NM, UG only
611 Wireman
397 Yard engine operator
999 Unknown or NEC
8-22
(NUMERICAL LISTING) COAL AND METAL/NONMETAL OCCUPATIONS
DO NOT USE FOR CODING
CODE OCCUPATION
8-23
CODE OCCUPATION
8-26
CODE DESCRIPTION
277 Buggy Pusher
301 Belt/Conveyor Man
302 Electrician
303 Electrician Helper
304 Mechanic Repairman
305 Mechanic Helper
307 Shotfirer/Shootr/Blastr
308 Mason
309 Supp/Supp Trck Drvr/Whsmrn
311 Wiremn/Comm Repairman
312 Belt Vulcanizer
313 Cleanup Man
314 Coal-MN Sampler
315 Fan Attendant
316 Laborer/Utility MN/Pumper
317 Rodman
318 Oiler/Greaser
319 Welder
320 Cager/Cage Attendnt/Aerial
321 Hoistman/Engineer
322 Dump Opr
323 Transit Man
324 Trainee
325 Bobcat Operator
327 Surface miner
330 Skip Tender
331 Claw Operator
8-27
CODE DESCRIPTION
333 Drill Helper
334 Drill Opr
340 Boom Operator
350 Shuttle Car Opr
355 Chainman
356 Rock Driller
360 Machinist
362 Brakeman/Trip Rider
363 Miner Nec/Quarry Worker
365 Dispatcher
366 Waterboy
367 Power Shovel Opr/Pitman
368 Bulldzer Opr/Tractr/Hvy E
369 Motorman/Swamper/Switchmn
370 Auger Operator
371 Auger Helper
372 Barge Atndnt/Boat/Dredge
373 Car Dropper
374 Clnplt/Med/Boneyopr/Crshr
375 Grader Opr/Roadgradr Opr
376 Truck Driver
378 Crane Opr/Dragline Backho
379 Dryer Operator
380 Fine Coal Plant Operator
381 Hoist Operator Helper
382 Highlft Opr/Frntnd Ldr
383 Highwall Drill Helper
8-28
CODE DESCRIPTION
384 Highwall Drill Operator
385 Lampman
386 Refuse Truck Driver
387 Rotry Buckt Excavtr Opr
388 Scalper-Screen Operator
389 Forklift Operator
390 Silo Operator
391 Stripping Shovel Operator
392 Tipple Opr/Topman/Binman
393 Weighman
394 Carpenter
395 Water Truck Operator
396 Watchman/Guard
397 Yard Engineer Opr/Firmn
398 Stone Fnishng/Sizing Prsl
399 Dimnsn Stone Cutr/Polishr
402 Master Electrician
404 Master Mechanic
414 Dust Samplr/Lab Technician
418 Maintenance Foreman
423 Surveyor
430 Ast Min Formn/Asst Mn Mgr
449 Mine Foremn/Mine Mgr/Ownr
456 Engnr-Elec/Vent/Mining
462 Fire Bs/Pre-Shift Examiner
464 Inspector
481 Superintendent
8-29
CODE DESCRIPTION
489 Outside Foreman
494 Prep Plt Foremn/Mill fore
495 Safety Director
496 Union Representative
497 Timekeeper/Clerk/Ofc Help
590 Education Specialist
591 Mnrl Industrl Sfty Offcr
592 Mine Safety Instructor
593 Safety Representative
594 Training Specialist
999 Unknown or NEC
DEGREE DEFINITION
1 Death Fatal
2 Permanent Total or permanent partial disability
3 Days away from work only
4 Days away from work and days of restricted activity
5 Days of restricted work activity only
6 Injuries that do not result in death, nor days away from work, nor days of restricted
work activity
7 Occupational illnesses not classified 1 thru 6
8 Fatal and nonfatal injuries due to natural causes to employees on company business
9 Fatal and nonfatal cases involving nonemployees on or off of mine property
10 All other cases (includes first aid)
8-30
8.5.1 Degree 1
8.5.2 Degree 2
Permanent-total disability. The classification for any injury or illness other than death which
permanently or totally incapacitates an employee from following any gainful employment or which
results in the loss, or complete loss of use, of any of the following in one accident:
a. both eyes.
b. one eye and one hand, or arm, or leg, or foot.
c. any two of the following not on the same limb: hand, arm, foot, or leg.
Permanent-partial disability. The classification for any injury or illness other than death or permanent
total disability which results in the loss, or complete loss of use, of any member or part of a member of
the body, or any impairment of functions of the body or part thereof, regardless of any pre-existing
disability of the affected member or impaired body function. The following are NOT classified as
permanent-partial disabilities:
b. Loss of tip of finger to tip of toe without bone involvement. For the purpose of this manual,
the loss or removal of the tuft of the bone is the distal phalange of a finger or toe shall be considered
bone involvement provided it shows in X rays.
8.5.3 Degree 3
Nonfatal injuries which do not result in permanent impairment, but which render the injured person
unable to perform a regularly established job which is open and available to him during the entire time
interval corresponding to the hours of his regular shift. The number of days away from work should
not include the day of injury or onset of illness or any days on which the miner would not have
worked even though able to work.
8-31
If an employee loses a day from work solely because of the unavailability of professional medical
personnel for initial observation or treatment and not as a direct consequence of the injury or illness,
the day should not be counted as a day away from work.
8.5.4 Degree 4
Days away from work and days of Restricted Activity. Nonfatal injuries that begin as Degree 5 and
later loss workdays, or injuries that begin as Degree 3 and later have restricted work activity.
8.5.5 Degree 5
Days of Restricted Work Activity only. Nonfatal injuries which do not result in permanent impairment
nor days away from work. Number of days:
The number of restricted days does not include the day of injury or onset of occupational illness, nor
any days the miner did not work even though able to work. If any injured or ill employee has
scheduled follow-up medical treatment or observation which results in the loss of a full workday
solely because of the unavailability of professional medical personnel, it will not be counted as a day
of restricted work activity. Days of restricted work activity end as a result of any one of the following:
a. The miner returns to his regularly scheduled job and performs all of its duties for a full day
or shift.
8.5.6 Degree 6
No Lost-Time Injuries. Injuries that do not result in death, permanent impairment, days away from
work or restricted work activity.
8-32
8.5.7 Degree 7
Occupational illness. Pneumoconiosis, silicosis, asbestosis, and other such diseases. Hearing loss,
cancer, hepatitis, etc. Single accident occurrence will not be coded as degree 7. See Section 8.13 for
further definition.
8.5.8 Degree 8
Fatal and Nonfatal. Cases due to natural causes to employees on company business. e.g. Heart
attacks, strokes, etc.
8.5.9 Degree 9
Fatal and Nonfatal. Cases involving nonemployees on or off mine property. (OSHA responsibility)
8.5.10 Degree 10
All Other Cases. Injuries resulting in death, permanent impairment or disability reported to MSHA
and determined to be nonchargeable.
Also, first-aid cases reported as such by the company or changed by audit or inspectors.
The source of injury classification identifies the object, substance, exposure or bodily motion which
directly produced or inflicted the reported injury. There must be direct relationship between the
source of injury and nature of injury.
a. When the choice is between a moving and a stationary object, select the moving object.
b. When the choice is between two moving or two stationary objects select that which was
contacted last.
c. If a person falls from an elevation and strikes several objects on the way down and strikes
the floor, select the floor as the source of injury. Choose the last object. If it is very evident that an
object the person struck on the way down is the source, code to that object. If source of injury from a
fall is undetermined use floor or ground of location at which fall occurs.
8-33
8.6.2 Bodily Motion
Name bodily motion only when the injury results solely from stress or strain induced by a free
movement of the body or its parts or from assumption of a strained or unnatural position. This
includes strains or sprains from stretching, reaching, turning, twisting, bending, walking, climbing,
running or from efforts to recover loss of equilibrium, providing this does not result in a fall or in
forcible contact with an object. Escaping a hazard.
Do NOT name bodily motion as the source if the injury occurred in a fall, or from bumping or striking
an object, lifting, pulling, wielding. In a lifting or pulling injury, name the object causing the physical
effort. Example: Shoveling coal - coal, or the weight, is the source. Entering or leaving vehicle.
8.6.3 Machinery
In order to maintain a correct analytical structure, code the correct mining machine when machinery is
the source of injury. Example: bulldozer (08) would go with 076, Surface Mining Machines;
Continuous Miner (12) would go with 077, Underground Mining Machine.
Buildings and Structures (INDOORS including mines, mills, and cleaning plants). See also 117 - 124.
1
NEC means "Not Elsewhere Classified".
8-34
010 Floor -- walking surface (Note: NOT UNDERGROUND; see section on Underground
Work Area)
011 Steps, stairs
012 Doors (includes underground ventilation), mandoor, airlock
013 Storage tanks and bins, portable surge bins
014 Dams, locks, ponds, bridges etc.
015 Mine headframe
016 Scaffolds, staging, etc. (Include platforms and catwalks) gantry
017 Towers, poles, etc.
018 Wharfs, docks, etc.
019 Buildings and structures, boats and rafts, ramp NEC
020 Brick, ceramic
021 Acids and alkalies (wet cement, wet grout, shot crete, lime - cement dust, trona, rock
dust). Becomes chemical burn when dry compound mixes with moisture of skin or liquid.
022 Oxygen deficient atmosphere
023 Noxious mine gases, NEC (carbon monoxide, blasting/dynamite fumes, exhaust fumes)
024 Chemicals and chemical compounds, NEC (Caustic)
8-35
Cold (Atmospheric, environmental)
027 Ice
028 Snow
029 Cold (atmospheric, environmental) NEC
034 Chutes and slides (conveyor hoppers for coal or ore) airslide
035 Belt conveyors, MBC or Mobile Bridge Conveyor
036 Longwall conveyor
037 Shaking and vibrating conveyor
038 Conveyors, NEC
Electric Apparatus
039 Motors
040 Generators
041 Transformers, converters
042 Conductors, electric cables attached to mining equipment, trolley poles, electric wires
043 Electrical apparatus, NEC (Include electric light bulbs) car and light batteries, lightning,
starters, flashlight, fuse box
044 Explosives (only injuries related directly to explosives)
045 Flame, Fire, Smoke, NEC
8-36
Hand Tools (Not Powered)
052 Abrasive stone or wheel grinder; buffer, polisher, waxer (not bench grinder)
053 Power saw, band saw
054 Drill, rotary (coal drill)
055 Drill, percussive (hard rock drill; include jackhammer, pneumatic drill, hand drill)
056 Impactor, Tamper
057 Hand tools, powered, NEC - air wrench, air lance, blow pipe, impact wrench, buggy
wrench, ramsit
058 Heat (Atmospheric and Environmental; NOTE: Code burns to mine fire or to petroleum
products, equipment or electric apparatus as the source of heat)
Heating Equipment (furnaces, retorts, space heaters, stoves, ranges, etc.; not electric)
8-37
Hoisting Apparatus
Machines (Shop)
074 Machines, NEC, welder, office machines, bonder, cherry picker, scaling rig, lathe, bench
grinder, drill press, scissor truck
075 Milling, Cleaning Plant, and Breaker Machines (Rod, pug, crusher)
076 Surface mining machines
077 Underground mining machines
8-38
Mechanical Power Transmission Apparatus
089 Broken rock, coal, ore, waste. NOTE: waste may be called Aboney@ or Agob@, slurry,
muck
090 Caving rock, coal, ore, waste (from in place) bentonite
091 Landslide (surface only)
092 Pulverized mineral (fines, particles, mine dust)
093 Sand or gravel or shell
094 Loose dirt and mud
095 Mineral items, NEC
096 Noise BEC
097 Plants, trees, vegetation
098 Pumps, fans, compressors, engines, turbines, NEC
8-39
Radiating Substances and Equipment
Vehicles
111 Cribbing
112 Posts, Caps, Headers, Timber
113 Blocking
114 Pallets
115 Railroad ties
116 Wood items, NEC
8-40
Ground and Other Surface Outside - not in buildings or underground
117 Ground
118 Stairs, steps (Stone, wood, dirt, steel, other)
119 Street, road
120 Working surfaces outside, NEC
NOTES:
The nature of injury classification identifies the injury in terms of its principal physical characteristics.
As a general rule, name the basic injury, not something that occurred later. Below are rules for
selection in cases of multiple injuries:
1. When one injury is obviously more severe than any of the others, select that injury. For example:
select an injury involving permanent impairment in preference to a temporary injury. Select an
amputated finger rather than a cut hand.
2. Where an individual suffers several injuries such as cuts and sprains, and no one injury is indicated
as more serious than any other, classify as Amultiple injuries@. Nature of injury is directly associated
with part of body and source of injury for analytical purposes.
8-41
100 Amputation or enucleation
110 Asphyxia, strangulation, drowning, smoke inhalation, suffocation POB 600
120 Burn or scald (heat) - Injuries resulting from contact with hot substances. (Does not
include chemical burns, effects of radiation, sunburn, systemic disability such as heat
stroke, nor friction burns, etc.) Acc. Type - 33
130 Burn, chemical - Tissue damage resulting from the corrosive action of chemicals,
chemical compounds, fumes, etc. (For example, burns from acids or alkalies) Acc. Type -
38
140 Concussion - brain, cerebral - POB 110
150 Contagious or infectious disease - anthrax, brucellosis, tuberculosis, pneumonia, etc. (Use
as occupational illness only) POB 430
160 Contusion, bruise - intact skin surface
170 Crushing
180 Cut, laceration, puncture - open wound - infections
190 Dermatitis - Rash, skin or tissue inflammation, including boils, etc. We are interested in
occupational dermatitis which generally results from direct contact with irritants or
sensitizing chemicals such as drugs, oils, biologic agents, plants, woods, or metals, which
may be in the form of solids, pastes, liquids, or vapors. Do not code in this category skin
or tissue damage injuries resulting from the corrosive action of chemicals, burns from
contact with hot substances, effects of exposure to radiation, effects of exposure to low
temperatures or inflammation or irritation resulting from friction or impact.
200 Dislocation
210 Electric shock, electrocution - POB 600
220 Fracture, (FX), chip
230 Freezing, frostbite, and other effects of exposure to low temperature.
240 Hearing loss, or impairment - This injury must have been a direct result of an industrial
(mining) accident. POB 122
250 Heat stroke, sunstroke, heat cramps, heat exhaustion, and other effects of environmental
heat whether on the surface or underground. Note: Do not include sunburn or other
effects of radiation. POB 600
260 Hernia; rupture - Include both inguinal and noninguinal hernias POB 440
270 Inflammation or irritation of joints, tendons, or muscles - Include bursitis, synovitis,
tenosynovitis, etc. Does not include strains, sprains, or dislocation of muscles or tendons.
8-42
280 Poisoning, systemic - A systemic morbid condition resulting from the inhalation,
ingestion, or skin absorption of a toxic substance affecting the functioning of the
metabolic system, the nervous system, the circulatory system, or other systems. Include
chemical or drug poisoning, metal poisoning, organic diseases, and venomous reptile bites
and insect stings. Does not include effects of radiation, pneumoconiosis, corrosive effects
of chemicals; skin-surface irritations; septicemia or infected wounds. POB 600
NOI POB(s)
100 110, 120, 122, 140, 141, 142, 150, 160, 200, 311, 312,
314, 320, 350, 400, 410, 420, 440, 450, 460, 511, 512,
514, 520, 550, 600, 800, 900
120 110, 160, 600
130 110, 160
160 110, 122, 160, 600
170 110, 122, 130, 142, 150, 500, 600
180 110, 160, 600
190 110, 160, 600
200 100, 110, 120, 121, 122, 130,140, 142, 150, 160, 170,
311, 313, 134, 330, 410, 511, 513, 514, 530, 600, 800,
900
220 110, 120, 121, 122, 130, 150, 400, 410, 600
230 110, 122, 160, 600
270 100, 110, 120, 121, 122, 130, 140, 141, 142, 143, 144,
150, 160, 170, 200, 400, 410, 420, 430, 600, 800
300 110, 122, 160, 600
301 110, 122, 160, 600
302 110, 160, 600
304 110, 122, 160, 600
310 110, 160, 600
330 100, 110, 120, 121, 122, 130, 140, 141, 142, 143, 144,
150, 160, 170, 600
360 110, 122, 160, 600
370 110, 160, 600
390 110, 160, 600
400 110, 160, 600
8-44
8.8 Part of Body
The part of body classification identifies the part of the body injured. Usually there is only one part of
the body reported with one nature of injury. If more than one part of body is reported with one nature
of injury, code part of body as multiple. If there is more than one nature of injury and more than one
part of body, the more serious nature of injury must be accompanied by the part of body affected. For
example: An amputation must be accompanied by part of body amputated and not coded as multiple
parts of body. If with multiple injuries no determination can be made as to the most severe nature of
injury it is then coded multiple and if there are multiple parts of body injured, code part of body as
multiple also.
HEAD
110 Brain
120 Ear (s) (external and internal)
121 Ear (s) external
122 Ear (s) internal (include hearing)
130 Eye (s) (include optic nerves and vision, eyelids, outer eye area)
Face
141 Jaw (include chin)
142 Mouth (include lips, teeth, tongue, throat and taste)
143 Nose (include nasal passages, sinus, and sense of smell)
144 Face, multiple parts (any combination of above parts)
140 Face, NEC1 include cheek
150 Scalp
160 Skull
170 Head, multiple (any combination of above parts)
100 Head, NEC (include forehead and eyebrows)
NECK
200 Neck
1
NEC means ANot Elsewhere Classified@
8-45
UPPER EXTREMITIES
Arm (s) (above wrist)
311 Upper arm (above elbow to shoulder) - humerous
312 Elbow
313 Forearm (below the elbow to wrist) ulnar, radius
314 Arm, multiple (any combination of above parts)
310 Arm, NEC*
320 Wrist
330 Hand (not wrist or fingers)
340 Finger (s), thumb
350 Upper extremities, multiple (any combination of above parts)
300 Upper extremities, NEC
TRUNK
LOWER EXTREMITIES
* Would apply to an amputation only when two limbs are involved, each having a different
point of amputation.
8-46
BODY SYSTEM
(Applies when the functioning of an entire body system has been affected without specific injury to
any other parts, as in the case of poisoning, corrosive action affecting internal organs, damage to nerve
centers, etc. Does not apply when the systemic damage results from an external injury affecting an
external part such as a back injury which includes damage to the nerves of the spinal cord.)
MULTIPLES PARTS
700 Multiple parts (applies when more than one major body part has been affected, for example: an
arm and a leg)
900 Unclassified
8-47
8.9 Mine Worker Activity Codes
The activity in which the worker was engaged when he received the injury.
CODE DESCRIPTION
001 Accident recovery (equipment and workers)
002 Advance longwall roof support
003 Blasting; shoot coal (not loading holes, see handling explosives)
004 Blow gun, airlance at all locations (primarily metal/nonmetal mining)
005 Brush floor: Remove rock, coal, ore, or waste to increase size of opening.
006 Bar down face, rib or side, roof or back brush rib/roof; test rib/ roof/back, scaling
007 Caging; operate elevator, manlift, etc.
008 Cement work; gunite crew, etc.
009 Change house, bathing; changing clothes, etc.
010 Chute, pull or free (using a bar to free)
011 Clean up
012 Climb in raise/shaft/manway
013 Climb scaffolds/ladders/platforms; headframe/derrick/towers
014 Climb in piled material/ore/rock/timber/stone
015 Couple/uncouple mine car/tractor/jeep, etc. (Include switching mine cars. NOTE: See
also item headings Sprag, Spot, Rerail)
016 Crawling/kneeling
017 Cross over (conveyor)
018 Double jack (breaking rock or beating on other with large hammer)
019 Drill face/rib/side/down/raise (Not roof bolter. See Roof Bolter category)
020 Electrical maintenance/repair (See also Machine maintenance not Electrical)
021 Environmental tests/checks (Methane test; ventilation check, etc.)
022 Escaping a hazard
023 Get on or off equipment, machines, etc. (For operate equipment, see AOperate@category
for specific equipment types.)
8-48
CODE DESCRIPTION
024 Grinding (bits, steel, welds, etc.)
025 Hand load; hand shoveling/mucking (Include picking, not barring down with a pick;
see item 006)
026 Handling coal, rock, waste, or ore
027 Handling explosives (Include load holes, mud cap, etc.)
028 Handling supplies or material, load and unload (Include rock dust, not timber, see 029,
Power Cables, see 040)
029 Handling timber - booming a cap
030 Hand tools (Not powered)
031 Hand tools (Powered)
032 Hang or reposition tubing/pipe/rope/wire, etc. (Include ventilation tubing) (Does not
include power cables)
033 Horseplay
034 Idle (Eat lunch, coffee break, sit, wait, power off, ventilation down, etc.)
035 Impactor (Using impactor)
036 Inspect equipment (Not maintenance or repair; see Electrical or Machine)
037 Investigate, enter, or work in bins, tanks, storage areas, or similar, inspect mine
038 Lay or repair railroad track/roadbed, switching tracks, etc.
039 Machine maintenance/repair (servicing machinery/equipment-- for electrical see prior
item: Electrical EE 020)
040 Move power cable (Including reeling of power cable)
041 Moving equipment (Include fans, pumps, extend conveyors; not moving mining
machinery listed in AOperate@ category, see below)
042 Observe operations (See also AIdle@ 034)
043 Office and laboratory work.
8-49
CODE DESCRIPTION
OPERATE EQUIPMENT1
044 Operate Auger (surface mines)
045 Operate Auger (underground mines)
046 Operate Barge, boat, dredge (operate means work on)
047 Operate Bulldozer
048 Operate Coal tipple/crusher/cleaning plant/breaker (operate means work in)
049 Operate Continuous miner
050 Operate Conveyor belt (not riding)
051 Operate Cutting machine (used to cut coal and some ores)2
052 Operate Fork lift
053 Operate Front-end loader
054 Operate Grader
055 Operate Haulage truck (surface and underground -- not utility truck, see below)
056 Operate Hoist
057 Operate Jitney
058 Operate Load-haul-dump (include scoop-tram, CAVO, transloader, scoop/tractor)
059 Operate Loading machine (gathering arm loader; St. Joe shovel)
060 Operate Locomotive (air trammer)
061 Operate Longwall, shear, plow used in longwall mining operations underground
062 Operate Mantrip (operate means rider in or on as well as control)
063 Operate Mill equipment
064 Operate Mucking machine
065 Operate Power shovel/dragline/backhoe
066 Operate Rock dust machine
1
No "Operate Equipment" category includes getting on or off equipment--See Item 023. Also
includes tramming and moving equipment.
2
Ore is a product that is economically feasible to mine.
8-50
CODE DESCRIPTION
Roof bolter (SEE DETAILED BREAKDOWN UNDER AROOF BOLTER@ BELOW)
067 Operate Scraper (rig); cans, etc.
068 Operate Shortwall used in shortwall mining operations underground
069 Operate Shuttle car
070 Operate Slusher
071 Operate Utility truck (include pickups, water trucks, suply tucks, etc.)
072 Operate Surface equipment, NEC 1
073 Operate Underground equipment, NEC
074 Remove or position hydraulic jack (not longwall, see item 002)
075 Rerail equipment (include replace trolley pole)
076 Ride equipment (include conveyors; not mantrip and not as an operator)
077 Roof bolter, drilling
078 Roof bolter, inserting bolt
079 Roof bolter, tramming
080 Roof bolter, NEC
081 Sand fill (backfilling stopes with sand, gob, etc.)
082 Set brattice (include build stoppings, walls, etc. Not cement)
083 Set/remove/relocate props
084 Skip pocket (pull/free)
085 Spot cars; drop cars
086 Sprag/block/chock mine cars or other track equipment
087 Supervise (not simply observe operation)
088 Surface construction, NEC
089 Timbering (include lagging and cribbing)
090 Travel (to and from work location; not mantrip)
1
NEC means ANot Elsewhere Classified@
8-51
CODE DESCRIPTION
091 Ventilation (maintenance/installation)
092 Walking/running
093 Welding and cutting (include electric or acetylene)
094 Wet down working place (using water to settle dust)
095 Working with solvents (Cleaning, degreasing agents)
096 Working with chemicals (caustics, acids, lime, shotcrete)
097 Working with noxious materials, NEC
098 Other, NEC
099 Unknown
MONTHS
01 – January 07 - July
02 - February 08 - August
03 - March 09 - September
04 – April 10 - October
05 – May 11 - November
06 – June 12 - December
DAYS
Months with 31 days are January, March, May, July, August, October, and December. Months with 30
days are April, June, September, and November. February has 28 days except Leap Year, when it has
29 days. Leap Year falls every presidential election year.
8-52
WEEKS
TIME
8-53
8.11 Accident Type Codes
The accident type IDENTIFIES THE EVENT which directly resulted in the reported injury. The
accident type is directly related to the source of injury. The relationship must be maintained to permit
accurate analysis. Particular care must be exercised to select the injury producing event when the
accident sequence comprises a series of associated events.
Accident types 01 and 02 result from the motion of the individual injured and not from any motion of
the object struck. The injury of a victim not thrown from truck which went down an embankment
would be coded 02. Same code for any jostling in a car accident.
Accident types 03 through 08 result from an object doing the striking of a victim.
03 Struck by concussion1
04 Struck by falling object (Drill falling down a raise, roof fall, etc.)
06 Struck by rolling or sliding object (Rolls or slides into person - if an object rolls to a point
and then falls on a person code to 04.)
07 Struck by powered moving object (Must be a motor vehicle or haulage equipment or mining
machinery.)
1
Concussion is a rare event. It often occurs following a mine explosion. It is a wave force of air
in the confined space of a mine and is very strong. Concussion has hurled men and equipment
hundreds of feet.
2
NEC means ANot Elsewhere Classified@
8-54
Accident types 09 through 16 are those where an injured individual falls from a higher to a lower
elevation, and as a result of the fall he is injured. If a person should fall (unhurt) from one-step ladder
and his fall put him in the way of a 50-ton truck which ran over him, the fall is incidental--the truck
would be the moving object.
Accident types 17 through 19 result from the velocity gained in falls on the same level. Again, it is the
gravitational or other motion provided by the fall that causes the injury.
Accident types 20 through 24 are similar. Type 20 could be an injury resulting from a worker getting
his hand caught in the cable reel mechanism of a machine. Type 21 could be an injury resulting from
a victim run over by a truck. Type 22 could be an injury resulting from a victim run over by a truck.
Type 22 could be a victim caught between two shuttle cars. Type 23 could be a victim caught
beneath the collapse of a high wall. Perhaps the most frequent use of Type 21 would be underground
where a victim is caught between a machine and the roof, or caught between a machine and the rib, or
between a machine and timber.
8-55
Injuries in the next category are non-impact cases in which the injury resulted from pressure,
vibration, or friction between the person and the source of injury.
Accident type 26 applies to non-impact cases in which the injury resulted solely from a free bodily
motion which imposed stress or strain upon some part of the body. This category applies generally to
the occurrence of strains, ruptures or other internal injuries resulting from voluntary or involuntary
motions.
Accident types 27 through 30 all have to do with over-exertion. Each results from non-impact cases in
which the injury resulted from excessive physical effort.
Accident type 31 applies only to non-impact cases in which the injury consisted of electric shock.
Accident types 32 through 35 do not apply where injury is from contact with sun rays or other
radiations, or injury by toxic or caustic chemicals, They do apply to non-impact cases in which the
injury consisted of a burn, heat exhaustion, freezing, frostbite, etc., or exposure to hot or cold objects,
air, gases, vapors, liquids, metal, etc.
32 Contact with heat (atmosphere or environment)
33 Contact with hot objects or substances
34 Contact with cold (atmosphere or environment)
35 Contact with cold objects or substances
1
NOTE: Lifting, pulling, etc. are not involved. Only voluntary or involuntary motions.
8-56
Accident types 36 through 38 all related to non-impact cases; the only difference among them is how
the substance was taken into their systems. Such substances may be inhaled, or eaten accidentally or
intentionally, or absorbed by skin contact. Code sunburn 38.
Accident type 41 would apply to cases of drowning from inundations. Drowning in streams, rivers,
lakes, oceans and other bodies of water of any dimensions would also be coded 41. Victim could
have fallen or jumped or been pushed into the water. Victims overcome by smoke in mine fires
should be coded in category 36.
41 Drowning
Use accident type 44 for all accidents without injury -- roof falls, rib falls, etc.
8-57
8.12 Classification of Accident
The following is the procedure to follow in classifying accidents. Remember it is the accident you are
classifying. The accident classification identifies the circumstances which contributed most directly to
the resulting accident. The accident may or may not be directly tied to any consequent injury. For that
reason you must not associate the classification decision predicated on any injury that may have
resulted. Keep the concepts of accident and injury clear and distinct in your mind as separate things.
EXCEPTIONS: Falls that occur while barring down -- Code AFall of Face, Rib, Side or Highwall@ to
06; and code AFall of Roof or Back@ to 07; do not use accident classification 10 - AHandtools@.
1. ELECTRICAL -- Accidents in which the electric current (but not stray current) is most directly
responsible for the resulting accident.
6. FALL OF FACE, RIB, PILLAR, SIDE, OR HIGHWALL (from in place) -- Accidents in this
classification include falls of material while barring down or placing props, also
pressure bumps and bursts. Not included are accidents in which the motion of
machinery or haulage equipment caused the fall either directly or by knocking out
support; such falls are classified in machinery or haulage, as appropriate.
8-58
7. FALL OF ROOF OR BACK (from in place) -- Underground only - Accidents which include falls
while barring down or placing props, also pressure bumps and bursts. Not included are
accidents in which the motion of machinery or haulage equipment caused the fall either
directly or by knocking out support; such falls are classified in machinery or haulage,
as appropriate.
8. FIRE -- Accidents related to burning of material or mineral in the mine environment. Not included
are fires initiated by electricity or by explosion of gas or dust.
9. HANDLING MATERIAL -- (Lifting, pulling, pushing, shoveling material). The material may be
in bags, boxes, or loose sand, coal, rock, timber, etc. The accident must have been
most directly caused by handling material.
10. HANDTOOLS -- Accidents related to nonpowered tools when being used as handtools.
12. POWERED HAULAGE -- Haulage includes motors and rail cars, conveyors, bucket elevators,
vertical manlifts, self-loading scrapers or pans, shuttle cars, haulage trucks, front-end
loaders, load haul dumps, CAVO, forklifts, cherry pickers, mobile crane if traveling
with load, etc. Accidents that are caused by energized or moving unit or failure of
component parts. A car dropper who suffers an injury as a result of falling from a
moving car - charge the accident to haulage.
13. HOISTING -- Accidents involving cages, skips, ore buckets, elevators. The accident results from
the action, motion, or failure of the hoisting equipment or mechanism. Included are
equipment such as derricks and cranes only when used in shaft sinking; also suspended
work platforms in shafts and mine cars being lowered or raised by hoisting equipment
on slopes or inclines. A skip squeezed between timbers resulting in an accident, charge
hoisting. An ore bucket tipped for any reason causing an accident, charge hoisting.
15. IMPOUNDMENT -- An unstable condition at an impoundment, refuse pile, or culm bank which
requires emergency action in order to prevent failure, or which causes individuals to
evacuate an area; or, failure of an impoundment, refuse pile, or culm bank.
16. INUNDATION -- An unplanned inundation of a mine by a liquid or gas; the mine may be either a
surface or an underground mine.
8-59
17. MACHINERY -- Accidents that result from the action or motion of machinery or from failure of
component parts. Included are all electric and air-powered tools and mining machinery
such as drills, tuggers, slushers, draglines, power shovels, loading machines,
compressors, etc. Included derricks and cranes except when they are used in shaft
sinking (see AHoisting@) or mobile crane traveling with load (see APowered Haulage@).
18. SLIP OR FALL OF PERSON (From an elevation or on the same level) -- Accidents include slips
or falls while getting on or off machinery and haulage equipment which is not moving,
and slips or falls while servicing or repairing equipment or machinery. Includes
stepping in a hole.
8-60
CODE DESCRIPTION
02 Entrapment
03 Exploding vessels under pressure (air hoses, air tanks, hydraulic lines, hydraulic hose
burst, etc. due to internal pressure)
12 Powered haulage (include motors and rail cars, conveyors, shuttle cars, haulage trucks,
front-end loaders, load-haul-dumps, CAVO, forklifts, etc.) Motion of haulage causes
accident.
13 Hoisting (cages, skips, ore buckets, elevators, etc.) Motion of haulage causes accident.
14 Ignition or explosion of gas or dust.
15 Impoundment unstable condition (include refuse pile, or culm bank)
16 Inundation (inrush of water or mud or both, gas)
17 Machinery (include electric and air-powered tools; mining machines; draglines, shovels,
gathering arm loaders, stationary mucking machines, slushers, etc.) Motion of
machinery causes accident.
20 Striking or bumping while not handling material, while not on machinery or haulage, or
not using handtool. Code only where no other applies.
21 Other (Not occupational illness; for occupational illness, see Item 32).
8-61
8.13 Occupational Illnesses
PLEASE NOTE THE FOLLOWING CAREFULLY: Where occupational illnesses are reported on the
injury form, do not code the numbers shown on the form. DO code the following numbers:
CODE DESCRIPTION
26 Occupational skin diseases or disorders (contact dermatitus, eczema, or rash caused by
primary irritants and sensitizers or poisonous plants; oil acne; chrome ulcers; chemical
burns or inflammations)
27 Dust disease of the lungs (pneumoconiosis: silicosis, asbestosis, coal worker=s
pneumoconiosis, etc.)
28 Respiratory conditions due to toxic agents (Pneumonitis), pharyngitis, rhinitis or acute
congestion due to chemicals, dusts, gases, or fumes)
29 Poisoning. Systemic effects of toxic materials (poisoning by lead, mercury, cadmium,
arsenic, or other metals, poisoning by carbon monoxide, hydrogen sulfide or other
gases; poisoning by benzol, carbon tetrachloride, or other organic solvents; poisoning
by insecticide sprays such as parathion, lead arsonate; poisoning by other chemicals
such as formaldehyde, plastics and resins.)
30 Disorders due to physical agents other than toxic materials. (Heatstroke, sunstroke, heat
exhaustion and other effects of environmental heat; freezing frostbite and effects of
exposure to low temperatures; caisson disease; effects of ionizing radiation (radon
daughters, non-medical, non-therapeutic x-rays, radium); effects of nonionizing
radiation (welding flash, ultra-violet rays, micro-waves, sunburns).
31 Disorders associated with repeated trauma (noise induced hearing loss, synovitis,
tenosynovitis and bursitis, Raynaud=s phenomena and other conditions due to repeated
motion, vibrations or pressure)
32 All other occupational illnesses. (Infectious hepatitis, malignant and benign tumors,
and any form of cancer, kidney diseases, food poisoning, histoplasmosis).
8-62
8.14 Time Charges
Permanent Partial Disability. Permanent partial disabilities, either traumatic or surgical, resulting
from work injuries shall be assigned charges as provided in the Table of Scheduled Charges. These
charges shall be used whether the actual number of days lost is greater or less than the scheduled
charges, or even if no days are lost at all, except as noted under APermanent and Temporary Injuries in
the Same Accident@, below. Included in incident and severity rates whether lost time or not.
Scheduled Charges. See the table and the hand and foot chart on the following pages.
Charges for Finger and Toe Amputations. For each finger (or toe) use only one charge the charge
shown in the table or on the chart for the highest valued bone involved. For amputations of more than
one finger (or toe), total the separate charges for each finger (or toe).
Example: Amputation of the little finger with part of the metacarpal would be charged 400
days. Amputation of the ring finger involving the proximal phalange would be charged 240
days. If both of these occurred in one accident, the charge would be 400 + 240, or 640 days.
Charge for Loss of Use. The charge for loss of use shall be a percentage of the scheduled charge,
corresponding to the percentage loss of use of the member or part of member involved, as determined
by the physician engaged or authorized by the employer to treat the case. An exception is made in
respect to loss of hearing which is considered a permanent partial disability only in the event of
complete industrial loss of hearing, in which case the full time charges shall apply as shown in the
Table of Scheduled Charges.
Example: An injury to the index finger resulted in stiffness at the middle phalange which the
physician estimated at 25 percent loss of use, the charge would be 25 percent of 200 days, or
50 days.
Impairments Affecting More Than One Part of the Body. For permanent impairment affecting more
than one part of the body, the total charge shall be the sum of the scheduled charges for the individual
body parts impaired. If the sum exceeds 6,000 days, the total charge shall be 6,000 days.
Permanent and Temporary Injuries in the Same Accident. In those few cases where an employee
suffers a permanent partial injury to one part of the body and a temporary total injury to another part in
one accident, the greater charge shall be used and shall determine the injury classification.
Charges for Injuries Not Identified in the Table. The charge for any permanent injury other than those
identified in the schedule of charges (such as damage to internal organs, loss of speech, damage to
lungs, back, etc.) shall be a percentage of 6,000 days, corresponding to the percentage of permanent
total disability which results from the injury, as determined by the physician engaged or authorized by
the employer to treat the case.
8-63
CHART OF SCHEDULED CHARGES FOR HAND AND FOOT
HAND
Distal
Middle
Proximal Little
50
Metacarpus 100
Carpus s 200
nge Ring
Ph ala 60
40
0 120
240
( 5) 450
Ulna
( 4) 150 75 Middle
500 300
(3)
FOOT
Metatarsus
350 150 75 25
Tarsus
350 150 75 35
350 150 75 35
350 150 75 35
600
150
2400 300
Phalanges
Figure 8.1
TABLE OF SCHEDULED CHARGES
Arm
Any point above ■ elbow, including shoulder joint 4,500
Any point above wrist and at or below elbow 3,600
Leg
Any point above ■ knee 4,500
Any point above ankle and at or below knee 3,000
Figure 8.2
TABLE OF SCHEDULED CHARGES
B. IMPAIRMENT OF FUNCTION
One Eye (loss of sight), whether or not there is sight in the other eye 1,800
Both Eyes (loss of sight), in one accident 6,000
One Ear (complete industrial loss of hearing), whether or not there is 600
hearing in the other ear
Both Ears (complete industrial loss of hearing), in one accident 3,000
Unrepaired Hernia 50
(Repaired Hernia should not be classified as a permanent partial disability)
Figure 8.3
DAYS OF DISABILITY
Figure 8.4
Skull
Cranium
Face
Clavicle
Scapula
Thorax
Upper limb Sternum
Rib
Humerus
Pubis
Hand Coccyx
Ischium
Carpals
Metacarpals
Phalanges
Lower limb
Femur
Patella
Fibula
Tibia
Foot
Tarsals
Metatarsals
Phalanges
Calcaneus
Figure 8.5
8.15 Keywords
Keywords are not coded for all injuries or accidents. They are used only as a supplement to all other
coding. Keywords are provided as an aid to researchers, for use in identifying narratives of interest
which may not have been selected from other coded items.
Keywords are associated with a classification. The words are listed in order of importance as
determined by researchers. When a keyword is found on the form for the coded classification it is to
be coded (no synonyms or interpretation). Some classifications do not have keywords.
Keywords may be added as need is identified, but they will not be inserted.
01 Electrical
0101 energized
0102 hoist
0103 ground
0104 arc, flash
0105 splice
0106 switch
0107 box
0108 battery
0109 sparks
0110 glasses
0111 ungrounded
0112 lightning (direct)
8-64
04 Explosives and breaking agents
0401 blasting machine
0402 blasting box
0403 misfire
0404 cardox
0405 airdox
0406 fuse
0407 primers
0408 booster
0409 spitter
0410 igniter
0411 premature
0412 blasting caps
0413 lightning
05 falling/rolling . . . material
0501 chute
0502 grizzley
0503 FOPS
0504 canopy
0505 cab
0506 timbers
0507 rail
0508 pipe
0509 steel
0510 drill
0511 lightning
8-65
06 fall of face . . .
0601 pressure burst, pressure bump
0602 rockburst, outburst
0603 cab
0604 canopy
0605 shaft
0606 raise
0607 highwall
0608 drilling
0609 charging, load explosives
0610 cleanup
0611 support
0612 bolter
0613 loader
0614 scaling, bar down
0615 lightning
8-66
07 fall of roof . . .
0701 beyond
0702 inby
0703 outby
0704 cab
0705 canopy
0706 FOPS
0707 roof-support-failure
0708 roof-control-plan
0709 haulageway
0710 intersection
0711 bolting
0712 drilling
0713 scaling, bar down
0714 pressure-bump
0715 pressure-burst
0716 rockburst
0717 room, entry
0718 slope
0719 longwall
0720 pillar
0721 ramp
0722 kettle bottom
0723 lightning
8-67
08 fire
0801 methane
0802 dust
0803 gas
0804 gasoline
0805 oil
0806 heater
0807 salamander
0808 solvent
0809 drill, welder, any equipment
0810 spark
0811 spontaneous
0812 gob
0813 lightning
09 Handling material
0901 entering/leaving vehicle
0902 pallet/skid
0903 glasses
0904 jumped - people
0905 self-rescuer
8-68
12 Powered haulage
1201 berm, bank, embankment, refuse pile
1202 ROPS
1203 FOPS
1204 seat belts
1205 cab
1206 canopy
1207 failed (not person)
1208 derailed, rerailed (not trolley wires)
1209 engine, transmssion, clutch, drive train
1210 brakes
1211 lost-control - spun out
1212 hydraulic
1213 turned-over, flipped over, tilt
1214 backed
1215 jumped (person or machine
1216 collision, ran into, hit, struck (not holes and lumps in road) can
1217 not-turned-off
1218 ramp, slope, incline
1219 rail
1220 couple, uncouple - hook up
1221 slip, slid - people or machines
1222 switch
1223 beltline, belt, conveyor, roller
1224 bucket
1225 steering
1226 tram
1227 lightning
8-69
13 Hoisting
1301 rope, cable, chain, wire
1302 brakes
1303 control
1304 sinking
1305 galloway
1306 skip
1307 cage
1308 headframe
1309 stage
1310 crosshead
1311 platform
1312 speed
1313 wind (not wind blowing)
1314 travel
1315 guides
1316 construction
1317 bucket
1318 boom
1319 failed - failure
1321 jumped (machine or people)
1322 switch
1323 lightning
1324 electrical
8-70
14 Ignition of gas or dust
1401 rockdust
1402 explosives
1403 steming
1404 welding, torch, cutting
1405 drill - (any machine or equipment causing ingition;
EXAMPLE: auger, roof bolter, continuous miner)
1406 blasting
1407 electrical
1408 flame
1409 lightning
15 Impoundment
1501 construction
1502 seep
1503 leak
1504 crack
1505 slide
1506 overtop
1507 lightning/storm
8-71
17 Machinery
1701 brakes
1702 steering, control levers
1703 engine, transmission, clutch
1704 hydraulic
1705 failure, failed, broke, bent
1706 ran, run, (not people) tram
1707 backed (not people)
1708 lost control
1709 FOPS (falling objects protection)
1710 ROPS (roll over protection)
1711 cab
1712 canopy
1713 turned-over - rolled over, tip, tilt
1714 energized, turned on, operating (and should not have been)
1715 slip, slid, jumped (machine)
1716 jumped (people)
1717 temp. Roof supports - TRS, ATR, ATRS
1718 lightning
8-72
18 Slip/fall of person
1801 ladder, rung
1802 steps, stairways
1803 scaffolds, platform
1804 water, wet
1805 ice, snow
1806 mud
1807 oil, grease
1808 hole
1809 belt - conveyor
1810 falling from vehicle
1811 catwalk, walway, girders
1812 handrail
1813 jumped
1814 lightning
26 - 32 Illness
2601 blackdamp
2602 carbon - monoxide
2603 cement
2604 lime
2605 exhaust
2606 H2S, hydrogen-sulfide
2607 Trona
2608 lead
2609 resin
2610 chemical (NEC)
2611 sulphur dioxide
2612 toxic
2613 gas, fumes
2614 Vanadium, radon/uranium
8-73